Blue Clean AR 117 Instruction manual

Model AR112S

Instruction Manual

OFF/O

ON/I

Customer Help Line

1-866-235-5112

WARNING:

To reduce the risk of injury, the user must read and understand the instructions before using this product.

AR112S-92723-DR

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

www.arblueclean.com

1

P

ackage

c

ontent

:

1. Power washer unit

Q uick

S tart

G uide

4

2. Manual

3. Nozzle cleaning wire

(may be taped to the manual)

4. Handle

5. Screws (2)

6. Spray gun holder

7. Cord hook

8. Spray gun

(8A shows trigger lock button)

9. Lance Extension

10. Vari-Spray nozzle

11. High pressure hose

12. Detergent bottle

13. Power washer quick connect

(QC) filter (clear)

(Connect to

Power Washer Unit)

3

2

6

13

9

OFF/O

ON/I

14. Garden hose adapter (GHA)

(Connect to Garden Hose)

14

10

12

5

1

7

11

8

8A

OFF/O

ON/I

OFF/O

ON/I

1. Screw handle to main unit.

2. Slide Gun holder on side.

3. Slide cord hook on side.

4. Screw on high pressure hose to power washer

5. Push to attach high pressure hose to gun.

2

6. Release high pressure hose from gun.

Unlock

Lock

7. Press switch up to unlock and down to lock spray gun. NOTE: The trigger lock prevents the trigger from being engaged accidentally.

8. Connect extension to gun first by pushing together and turning clockwise simultaneously. Twist collar clockwise to lock in place. Connect lances or detergent bottle by pushing together and twisting.

To remove push together and turn counter clockwise.

9. When using the detergent bottle fill it with a properly formulated detergent or cleaner with a water ratio according to instructions on the container . The detergent bottles comes with a straw which is attached onto the screw-on top. If you do not see the straw, look inside the bottle and attach it to the screw-on top.

(GHA)

10.

Adjust vari-spray nozzle by turning the head clockwise or counterclockwise to change it from a fine point spray to a wide fan spray.

11. Clear QC filter attaches to the power washer.

12. Attach GHA to the end of the garden hose.

QC - Clear

Adapter

13. GHA attaches to QC

Clear filter.

OFF/0

ON/I

OFF/0

ON/I

Garden Hose

Adapter (GHA)

14. Snap the GHA onto the QC adapter. To remove pull back on the collar and pull off.

Unlock

15. Plug machine into a grounded outlet, push reset button.

16. Turn on Water

18. Press safety button to unlock trigger gun and squeeze trigger to turn on.

Make sure spray gun is in locked position when not in use.

Lock

17. Switch ON and OFF positions.

3

4

t

abLe of

c

ontentS

Quick Start ....................................................... 2

Specifications .................................................. 4

Limited Warranty ............................................. 4

Warranty Process ............................................ 4

Introduction ...................................................... 5

Safeguard, Warnings & Safety Tips ................. 5

Package Content ............................................. 7

Unpacking & Assembly .................................... 8

Operating Instructions ................................... 13

How to Clean ................................................. 14

Operating Tips and Maintenance................... 15

Storage .......................................................... 16

Pump Saver ................................................... 17

Replacement Parts ........................................ 18

Troubleshooting and FAQ .............................. 19

S

PecificationS

Model

Max PSI

AR112S

(lbs/sq/in)

1,500

Max GPM

(gal/per/min)

1.4

Max Temp

122° F

Volts Amps Weight (lbs)

120 12 15

L

imited

W

arranty

This product is under warranty to the original retail consumer against defects in material and workmanship for a period of 1 (one) year and is a complete “bumper to bumper” warranty including the spray gun, the high pressure hose and all accessories from the date of purchase. The warranty is not transferable or assignable. This warranty covers replacement parts. This limited one year warranty applies only to products used in consumer applications and is void in rental or any commercial application. Reasonable care must be used in conformity with operation and maintenance instructions in the owner’s manual and quick start guide. Failure to follow these instructions will void this warranty.

W

arranty

P

roceSS

Keep your original receipt of purchase in case of warranty claim.

If your power washer develops a problem, contact Customer Service by one of the two methods:

1. Send an e-mail to [email protected] with your name, address the model of your power washer, when and where you purchased it. Describe in the e-mail the problem you are having. A

Customer Service person will contact you to resolve the problem.

2. Call our toll-free number at 1-866-235-5112. Customer Service is available Monday - Friday 8:00 a.m. to 5:00 p.m. Central Standard Time (CST). The Customer Service person will work with you to fix the problem.

If the power washer needs to be returned for repair, shipping costs to the company must be paid by the customer. A Return Merchandise Authorization (RMA) Number will be issued for the return.

Upon receiving the power washer, the company will repair or replace the unit. We will send unit back to customer at no charge.

Please note: Power washers sent to the company

without an RMA Number will NOT be accepted

and shipped back at the expense of the sender.

i

ntroduction

Congratulations on the purchase of your BLUE CLEAN POWER WASHER!

Your

BLUE CLEAN POWER WASHER is a power tool in every sense of the word that may be used outside your house and in. It is one of the finest most powerful home-use power washers in the marketplace today.

Please familiarize yourself with the following assembly, operating and safety information. Read this manual before using the power washer. Failure to follow these instructions could cause personal injury, property damage, or both. Save this manual for other users to read prior to using the power washer.

If you have any questions about or problems with your power washer please call our toll-free number

1- 866-235-5112 and talk with our Customer Service Support Team at AR North America Inc. We are available to talk with you Monday through Friday from 8 a.m. to 5 p.m. Central Standard Time (CST).

We can help you with questions regarding operation, warranty, replacement or optional parts, or contact us at i [email protected].

For more information on the BLUE CLEAN POWER WASHERS go to www.arblueclean.com.

Power washers, parts, and accessories can be ordered online 24 hours a day, 7 days a week for your convenience.

S

afeGuardS

, W

arninGS and

S

afety

t

ipS

• To avoid personal injury and/or damage to property and to maximize your power washing experience, carefully follow all of the safety tips, instructions, warnings and safeguards and become familiar with all of the controls. Be sure you know how to quickly bleed off the pressure from all parts of your power washer, and how to turn off the power washer .

• This power washer conforms to CSA and other safety and consumer standards. Do not modify or rebuild any part of your power washer.

• Do not use your power washer when you are under the influence of alcohol or drugs. Use this power tool carefully and only when you are alert .

• Watch your balance and footing while using your power washer. Surfaces become slippery when wet and are extra slippery when using a detergent or cleaner.

• Keep fingers, hands, feet and any part of your body clear of the stream of high pressure water. The powerful spray can cause blindness or blast holes in the skin. It can break a window if you are too close when you pull the trigger on the spray gun .

• Always wear eye protection to prevent injury to eyes when operating the power washer.

• To avoid mishaps or injury, always use the trigger safety lock when not using the power washer even if the spraying stops for a moment.

• The power washer is equipped with a Ground

Fault Circuit Interrupter (GFCI) which greatly reduces the chance of electric shock while the unit is in use.

• Point the spray gun in a safe direction when beginning a power washing session.

• Never operate the power washer in bare feet, sandals, or open-toed shoes.

• When using the power washer near children make sure they are closely supervised by an adult to avoid injury. Never let a child use the power washer.

• When first using the spray gun, hold the spray gun and lance with two hands when pulling the trigger until you get used to the “kick back” from the spray gun (one hand to pull the trigger and the other to stabilize the gun assembly).

5

• When you press the power switch to turn off the power washer, water pressure may remain in the system. To discharge the pressure, point the spray gun in a safe direction and pull the trigger.

• Never spray flammable liquids.

• Never use the power washer in areas that contain combustible dust, liquids or vapors.

• Avoid contact of the pressure hose with sharp objects and examine the hose regularly.

Replace if damaged. Due to the high pressure involved, it cannot be repaired if cut of damaged.

• Only use detergent specifically formulated for power washers and follow instructions on the detergent’s label. We have a selection of power washer detergents to choose from.

Go to www.arblueclean.com for more information and to order the detergents.

Power washer detergents are also available at your local hardware store.

• Protect eyes, lungs, and skin from exposure to detergent. Dish or laundry soap is too thick and will clog the nozzle of your detergent bottle.

• IMPORTANT: Store the power washer indoors to prevent the water in the unit from expanding under freezing conditions.

When the water freezes and expands, your power washer will be damaged and become inoperable. Or, if storing outdoors, it is recommended you use Pump Saver. Pump

Saver can be purchased on our website:

www.arblueclean.com. See details in the

Pump Saver section of this manual.

• Never use hot water with your power washer.

It will overheat and damage the high pressure pump.

• Never leave the power washer unattended while it is powered “on”.

• Always turn the water supply “on ” before turning the power washer power to “on”.

Running the pump dry will cause damage to the internal components.

• Never use a water supply to your power washer that exceeds 150 psi maximum.

6

• Never disconnect the high pressure hose from the power washer while the system is pressurized.

• Never permanently engage the trigger mechanisms on the spray gun.

• Never operate the power washer unless all components are properly and securely connected.

• Never allow the power washer pump to run for more than one minute, after you have turned off the water supply. This can cause the motor and pump to overheat and fail.

• Never use lances or other parts that have not been supplied with your power washer.

• Never use an extension power cord since it defeats the effectiveness of the GFCI and increases the chance of electrocuting the operator.

• Never spray any electrical outlet with your power washer.

• Inspect the power cord before using. Do not use it if it is damaged.

Servicing of a Double-Insulated Appliance

In a double-insulated product, two systems of insulation are provided instead of grounding.

Grounding means are not provided for a doubleinsulated product, nor should grounding means be added to the product.

Servicing a double-insulated product requires extreme care and knowledge of the system, and should only be done by qualified service personnel.

Replacement parts for a double-insulated product must be identical to the original parts.

A double-insulated product is marked with the words “Double Insulation” or “Double Insulated”.

Product may also be marked with symbol shown here.

Double Insulated Product

P

ackage

c

ontent

:

1. Power washer unit

2. Manual

3. Nozzle cleaning wire

(may be taped to the manual)

4. Handle

5. Screws (2)

6. Spray gun holder

7. Cord hook

8. Spray gun

(8A shows trigger lock button)

9. Lance Extension

10. Vari-Spray nozzle

11. High pressure hose

12. Detergent bottle

13. Power washer quick connect (QC) filter (clear)

(Connect to Power

Washer Unit)

14. Garden hose adapter (GHA)

(Connect to Garden Hose)

Note - tool(s) required for assembly

Philip Screwdriver:

4

5

6

OFF/O

ON/I

1

7

11

3

OFF/O

ON/I

8

2

14

13

9

10

12

8A

7

U

nPacking

& a

SSembLy

• After unpacking the BLUE CLEAN POWER WASHER, lay out parts and accessories. Familiarize yourself with the parts in the package by comparing them to those listed on the “PACKAGE

CONTENTS” page.

• The BLUE CLEAN POWER WASHER requires some minor assembly. You’ll need a Phillips screwdriver to install the handle to the main unit.

NOTE: Some parts may or may not be already assembled.

• Install the handle to the BLUE CLEAN POWER WASHER (Fig. 1). Place the screws in the holes provided on the BLUE CLEAN POWER WASHER and handle, screw them together. Do not use a power screwdriver. When the screw is completely tight, give a small final clockwise twist of the screwdriver. Do not over tighten.

Fig. 1

• Slide the (spray gun holder) onto the left side of the washer when facing it. This does not require any screws.

(Fig. 2)

• Slide (cord hook holder) onto the right side of the washer when facing it. This does not require any screws.

(Fig. 3)

OFF/O

ON/I

OFF/O

ON/I

Fig. 2

Fig. 3

8

High Pressure Hose

• Screw the high pressure hose (clockwise) on the front of the unit at the bottom

(Fig. 4). Pull back the collar and insert o-ring post into the water outlet far enough so the collar can thread onto the outlet threads until hand tight. Do not use pliers or vice grips to tighten. If it takes fewer than six or so turns you have not properly tightened the high pressure hose fitting. It is easier to position the power washer in front of you so to ensure that the threads are started correctly. Failure to properly tighten the high pressure hose will result in the hose slipping or popping off immediately upon turning the unit on. Do not worry about damage if this occurs - just reinstall and take extra care at screwing on the high pressure hose fitting.

Fig. 4

• Connect the other end of the high pressure hose to the spray gun by inserting the silver metal tip of the high pressure hose into the fitting just ahead of the trigger guard. It will lock into the spray gun with a “click” (Fig. 5). Confirm the hose is locked into the spray gun by pulling slightly on the hose. The hose is now securely attached to the spray gun.

• To release the hose from the spray gun, press the button on the underside of the gun toward the trigger guard. The hose will slide out from the connection

(Fig. 6).

Fig. 5

Fig.6

9

Spray Gun

• To lock the trigger of the spray gun point the gun away from you and press the lock button forward to the front of the gun, (Fig. 7), after doing so, squeeze or pull the trigger to make sure it is locked and will not move. Always leave lock button in lock position when not in use. This ensures the gun is in “safe” mode until it is ready for use. Press the lock button back to unlock.

Unlock

Lock

Fig. 7

NOTE: The trigger lock prevents the trigger from being accidentally engaged.

Lance

• While the spray gun is in the locked position. Attach the extension lance directly to the spray gun, insert extension into the gun pushing together turning clockwise simultaneously, turn the extension collar clockwise to lock into place. To remove turn extension collar counter clockwise to unlock then push together and turn counter clockwise. The extension lance must be inserted in the gun first before using any of the other attachments, and to place in gun holder for storage. It is recommended that once extension is connected to leave it in place.

(Fig. 8)

Fig. 8

• Insert the adjustable spray nozzle lance or detergent bottle into the end of the extension lance by inserting and pushing together turning clockwise simultaneously. To remove push together and turn counter clockwise.

Remember to always push the safety lock button to lock the trigger when changing lances, to ensure that they do not accidentally eject with force during removal.

10

Always test a small area to avoid chance of damaging the surface. (Fig. 9)

Fig. 9

Fig. 10

• When using the adjustable spray lance, the spray pattern and intensity can be controlled according to power of water needed for each task by twisting the spray nozzle at the far end of the lance.

(Fig. 10).

Detergent Bottle

• When using the detergent bottle, fill it with a properly formulated detergent or cleaner with a water ratio according to instructions on the container

(Fig. 11). The detergent bottles comes with a straw which is fitted into the screw-on top. If you do not see the straw, look inside the bottle and attach it to the screw-on top.

(Fig. 12)

Fig. 11

NOTE: The ratio of water to detergent is 10:1 or 10 parts water to 1 part detergent.

• Pressure washer detergents are recommended. See page 15 for more information.

• Thick or gel like detergents will clog the power washer and can cause damage.

Fig. 12

11

Garden Hose Adapter

• Install the garden hose adapter (GHA) and quick connect filter. It is made up of two separate pieces. (1) A clear plastic adapter with a screen filter (about 3 inches long) (Fig. 13) and (2) a blue/ black collar attachment (Fig. 14).

Fig. 13 Fig. 14

• Attach the garden hose adapter to the end of the garden hose (Fig. 15).

• First, remove the plastic shipping cover on the water inlet on the front of the power washer on the

QC - Clear

Adapter

(GHA)

Garden Hose

Adapter (GHA)

Fig. 15 Fig. 16 right side. Hand tight is fine. Slide the blue/black collar onto the clear adapter (Fig. 16), it will

“click” into place.

• The water is now connected to your power washer. Turn on water.

• To remove the water hose, simply pull back on the blue collar and it will slide off the clear adapter.

Note: this can be done at any time. Water will not come out of the garden hose as the blue/ black collar has a water stop check valve. Water will only flow from the garden hose when it is connected to the clear adapter.

• You have now completed the assembly of your BLUE CLEAN POWER WASHER and are now ready to begin using your electric power washer. Read and observe all safety instructions.

12

o

Perating

i

nStrUctionS

*!Turn on the water supply at the faucet.!* (Fig. 17)

Fig. 17

Powering Up

• Make sure the “ON/OFF” switch is in the “OFF” position. The power switch has international symbols for ‘on’ and ‘off’: On (|) Off (O),

(Fig. 18 ).

OFF/0

ON/I

OFF/0

ON/I

Fig. 18 Fig. 19

• Unwind the power cord completely and plug the GFCI into a grounded 120 volt outlet. Press the

‘ reset’ button on the GFCI box (Fig. 19). The indicator window should show a red color. This must be done each time the unit is plugged in.

13

• Release the safety lock button on the spray gun by pressing the safety lock button from right to left (Fig. 20). While pointing the spray gun in a safe direction, squeeze the trigger on the spray gun until there is a steady stream of water, letting the water and air out of the hose.

Unlock

Lock

Fig. 20

• Turn the power switch to the ‘ON’ (|) position. The unit will turn on for 1 - 2 seconds and shut off, this is a normal function of the (TSS) auto start feature. Squeeze the spray gun trigger to begin pressure washing.

• Squeezing rapidly will cause the (TSS) feature to miss an on/off cycle that may prevent from turning on while squeezing trigger after rapid squeezing. Use slow deliberate trigger pulls to avoid such symptoms.

H

oW

t

o

c

Lean

Cleaning nozzles

• A clogged or partially clogged nozzle can cause significant reduction of water pressure coming out of the nozzle and/or cause the unit to pulsate while spraying.

• Turn off the unit

• Turn off the water supply to the unit

• Relieve any pressure trapped in the hose by squeezing the trigger 2-3 times, and then lock the spray gun by pushing the lock button from left to right.

• The screen inside the clear adapter should be cleaned periodically. Insert a pen or pencil in small hole at the end of the adapter. The screen filter will slide out (Fig. 21). Rinse it with clean water, and then place it back in the adapter.

14

Fig. 21

• Take off the adjustable lance. Rotate the nozzle on the adjustable lance to the narrow stream settling which opens up the fan blades. (Fig. 22).

Fig. 22 Fig. 23

• Using the nozzle tip cleaner provided (or an unfolded paper clip), insert the wire into the nozzle hole and move back and forth until debris is dislodged (Fig. 23). Back /flush water through the nozzle using garden hose and highest pressure available (either standard water nozzle or use your thumb over the nozzle to create water pressure for back flush).

o

Perating

t

iPS and

m

aintenance

• If you hear the motor run intermittently when the trigger is not being squeezed, that is normal. The pump is priming itself so it is ready to operate when the trigger is squeezed. Turn off the power washer if not being used after five minutes.

• The o-rings on the bayonet end of the adjustable lance should be cleaned regularly and lubricated with non-water soluble grease such as petroleum jelly.

• Keep the nozzle cleaning wire, Which is taped to this manual for use in unclogging the lance nozzle. If you lose the cleaning wire an straightened paper clip works fine.

How to Avoid Damaging Surfaces

• Damage to surfaces being cleaned occurs because the impact force of the water pressure exceeds the durability of the surface. Bare wood can be penetrated; paint can be peeled off, etc.

You can vary the force of your power washer by controlling: a. the angle of the surface being cleaned b. the distance of the nozzle from the surface being cleaned

• Never use a narrow high pressure stream of water or the turbo lance on soft surfaces susceptible to damage.

• Use the vari-spray lance when cleaning windows. Be sure to adjust the nozzle to low spray and place the nozzle approximately four to five feet away from the window with the nozzle at forty five degree angle. Squeeze the trigger and vary the spray pattern and angle until optimum cleaning efficiency is achieved.

15

Detergent / Storage

• Use detergents designed for power washers. We offer four (4) power washer detergents,

Auto, Motorcycle, Boat and Universal. These can be purchased online at our website

www.

arblueclean.com. Hardware stores or home centers also have power washer detergents for different cleaning projects. The cleaning solution should be the consistency of water in order to prevent clogging your detergent bottle and nozzle.

• The cleaning power of the detergents is enhanced when applied with low pressure; and time is allowed to break down the dirt and grime. The combination of low pressure and chemical action is very effective and can be better than scrubbing if applied properly.

Always spray detergent on a dry surface, do not pre-soak area. Wetting the surface first dilutes the detergent and reduces its cleaning ability. Do not allow detergent to dry on surface. On vertical surfaces being cleaned, apply detergent to lower surfaces and work your way up to prevent detergent from causing streaks in the dirt and grime. Rinse detergent by pressure washing from bottom up for same reason.

• If a stain is particularly tough, it may be necessary to reapply the detergent and use a bristled brush to scrub the stain. Subsequent power washing after brushing should successfully complete your cleaning job.

S

torage

• Remove lance from the gun and place in the accessory holder. Place the gun in the accessory holder one the side. Lances are placed into any of the slots in the back of the unit. Make sure to discard any remaining detergent from the bottle. Flush the bottle and nozzle head with fresh water to prevent clogging.

• When your pressure washing session has been completed, turn off the power switch located on the front of the power washer. Unplug the power cord from the outlet. Turn off the water supply.

Pull the trigger on the spray gun 2-3 times to drain out the excess water and to release any remaining water pressure. Disconnect the garden hose adapter from the water inlet. Do not allow the power washer to run with no water flowing through it.

• Remove detergent bottle and clean completely. Residual chemical will stick to the container and can cause the detergent injector to clog and not function properly.

• Remove high pressure hose from spray gun and unscrew the other end of the high pressure hose from the power washer.

• Hook the power cord around the L-shaped tab on the right side of the machine when facing it.

• The pressure hose is stored on the hose hook located on the back of the handle.

• DO NOT store the power washer where it is exposed to freezing temperatures unless

you use Pump Saver. It is recommended that you use Pump Saver for storing in freezing temperatures. Freezing will damage the pump unless Pump Saver is added to the power washer.

If not using or if storing your power washer for more than one month, run Pump Saver through it.

See the section on Pump Saver for more information.

16

P

UmP

S

aver

Pump Saver is a product that protects and prolongs the life of the pump. This will keep the internal parts of the pump lubricated and protected from freezing while being stored in ALL climates. It also assists with protection from internal corrosion. The Blue Clean part # is: PW64511 (16oz. bottle).

Order online at www.arblueclean.com

Pump Saver Instructions

Follow the previous storage instructions for your power washer. To prevent staining, protect the surface under the power washer from any excess fluid. Wear eye protection when using this product.

1. Turn off your power washer.

2. Disconnect garden hose.

3. Shake the bottle well before connecting to the power washer.

4. Screw the garden hose adapter to the Pump Saver Bottle.

5. Click onto pump inlet (clear quick connect filter).

6. Turn the valve on the bottle to the open position.

7. Turn the power washer on. Turn the power washer off as soon as the Pump Saver fluid begins to exit the water outlet - nozzle.

8. Turn the valve on the bottle to the off position and remove the Pump Saver bottle valve assembly from the power washer.

17

r

ePLacement

P

artS

3

1

4

2

5

8

9

7

11

10

6

12

9

10

11

12

5

6

7

8

Pos. Description

1 Detergent Bottle

2

3

4

Hose (QC) 20’

Spray Gun

Vari-Spray Lance/Nozzle

Extension Lance

Gun Holder

Cord Hook

Wheel

Wheel Cover

Quick Connect Filter (clear plastic)

Garden Hose Adapter

GFCI Assembly

Pump Spare Part Kits

Water Seals & Valves

Pre-Assembly TSS

O-Ring Kit

Order at: www.arblueclean.com / 1-866-235-5112

18

Part Number

PW50954

PW4220600

PW4120391

PW4120410

PW4120400

PW4220580

PW4220590

PW4220540

PW4220550

PW3082130

PW3082731

PW3084330

PW4220620

PW4220630

PW909107K

1

1

1

2

1

1

1

1

1

1

1

1

2

Qty.

1

1

t

roUbLeSHooting and

faQ

S

Unit will not turn on.

Make sure the power washer is in the “OFF” position. Plug in the electrical cord to a grounded 120 volt outlet (no electrical extension cord should be used). If the electrical cord will not plug into your outlet, your electrical outlet is not properly grounded and should not be used. Use another electrical outlet. Press the reset button on GFCI power box. If the color of red is not visible in the little window on the

GFCI, unplug and plug in again. Press reset, and look for the red color in the window, this should remain red in color. If the color is staying red, turn the power switch on the power washer to “ON”. Squeeze the trigger on the spray gun and try again.

The high pressure (HP) hose will not connect / stay connected to the spray gun. Is this a spray gun problem?

The unit is running but there is not water flow.

Why is water leaking where the high pressure hose connects to the spray gun?

I can’t remove the lance from the spray gun.

What should I do?

The power washer turns on for 2 seconds, shuts off, and will not turn back on. Do I have a defective unit?

If this did not correct the problem, try plugging into another electrical outlet and repeat the above procedure. If it is still not working, call

Customer Service at 1-866-235-5112.

In most cases, the spray gun is not the problem. The problem is the rubber sleeve covering the fitting at the end of the high pressure hose.

It has likely slipped up toward the metal tip. The fix: wiggle, twist and/ or pull the rubber sleeve down until the entire tip is visible plus an 1/8” of the metal fitting below the tip. Now try to insert the hose tip into the spray gun. It should “click” into place and will not come out until the hose is released by pushing in the lever on the underside of the gun.

You may cut away the end of the sleeve with a sharp knife if unable to move the sleeve down. Be careful not to cut or puncture the hose.

Check the water source. Unclog the nozzle on the lance. (See nozzle cleaning instructions under “Cleaning nozzles”.) Or take off the lance and just spray out of the spray gun. This will indicate if the problem is with the lance.

Make sure there is an o-ring at the end of the metal tip of the high pressure hose. If no o-ring is present, the connection between the hose and spray gun will leak. O-Ring Kits are available online at www.

arblueclean.com or call Customer Service at 1-866-235-5112 to place an order.

All lances and the detergent bottle are attached and removed from the spray gun in the same manner. Insert the quick-release end of the lance/detergent bottle into the spray gun. Press the spray gun and lance together (about a 1/8”) and turn clockwise. The lance will lock in place. Remove the lance by reversing this procedure. Press the spray gun and lance together and turn counter clockwise. The lance will slide out. Or, hold the spray gun and lance in an upright position with the nozzle end on the floor. Push the whole assembly straight down to loosen the connection, and then follow the removal process again. You may also spray soapy water or a lubricant in the area where the lance connects to the spray gun.

It sounds like your power washer is working just fine. When the water is connected, the accessories are assembled properly, and the power switch is turned on, the power washer may turn on for 1 - 2 seconds to prime the pump. It automatically shuts off and waits for the spray gun trigger to be pressed. When the trigger is pressed, water starts flowing through the pump. The water sensor in the pump “senses” the moving water and automatically turns the power washer on. Or, turn the power switch to off, hold in the trigger on the spray gun, so that you have a steady stream of water. While you are holding the trigger open on the spray gun, at the same time, turn the power switch on.

19

Model AR112S

OFF/O

ON/I

Cleaning and troubleshooting tips, manuals and other helpful information are available on our website. For parts and accessories for your Blue Clean Washer, visit www.arblueclean.com.

Ordering is easy and all major credit cards are accepted.

A.R. NORTH AMERICA, INC.

Attn: Power Washer Warranty Department

140 - 81st. Avenue NE, Fridley, MN 55432

Phone: 1-866-235-5112

Fax: 1-866-331-2762

Email: [email protected]

Website: www.arblueclean.com

Customer Help Line

1-866-235-5112

20 www.arblueclean.com