Pro-Audio General Catalogue

Pro-Audio General Catalogue
Pro-Audio General Catalogue
The history of the Sony microphone began in 1950 when,
for the first time, Sony microphones and tape recorders
were introduced to the world. Now, more than 60 years
later, Sony is synonymous with the production and distribution of
high quality professional audio products for news gathering, video
production, live events and broadcast.
Sony innovations continued with the development of electret
condenser microphones in the 1960s, appealing
to audiophiles who needed condenser performance with
the simplicity of a dynamic mic. This was followed by the
introduction of the Sony Lavalier mic in the 1970s.
During the 1960s, the first wireless mic was also developed, offering
systems for field and studio applications and
offering the ideal combination of performance, reliability
and versatility. From the 1970s, Sony developed the first
Worldwide diversity system. And in the 1980s, we expanded
into UHF systems, Diversity ENG camera receivers,
wireless handheld mics and systems for music reproduction.
More recently, Dual Diversity & rack mount tuners plus UHF
diversity wireless systems were introduced to the market and, coming
out of our work with digital audio on CD & DAT
formats from the 1980s, the Oxford Console and the DMXR100 followed in the 1990s.
Our fully Digital Wireless DWX system provides the best sound quality
and stability of any digital wireless on the market, providing high end
audio solutions in a range of applications from ENG to live music and
fixed installations in studios and OBs, providing Sony audio solutions
available for everyone.
With our UWP-D wireless microphone series Sony also provides a
digital audio processing system for ENG use with portable receiver,
providing the user with full channel access and up to 72MHz
bandwidth, the perfect audio solution for shooting on the go.
the power to move us
Experience superb
performance, long-lasting
reliability and seamless
system integration with Sony
superior digital and
analogue professional audio
With over 60 years’ experience of
continually redefining the creative and
technical possibilities for live and
recorded sound, our professional audio
solutions range from leading-edge
digital and analogue wireless systems to
shotgun microphones, headphones and
more. In fact, everything you need to
create,
share and enjoy perfect sound.
Wireless Microphone
World-leading professional digital wireless microphone systems offering
superb quality 24-bit AES/EBU digital audio for the highest quality
applications.
Ground-breaking entry-level analogue wireless microphone packages
with a range of robust, all-metal transmitters and portable and fixed
receivers for professional and semi-professional applications.
Affordable high-quality 24-bit digital audio microphone packages
with a range of robust, all-metal transmitters and portable and fixed
receivers for a wide range of applications.
contents
DWX Series
4
UWP-D/UWP Series
16
DWZ Series
30
ECM Series
41
F Series
53
SRP/DMX/PCM/MDR Series
56
Wired Microphone
Professional Electret condenser microphones delivering excellent sound
and noise handling performance for location and studio applications.
Professional Dynamic microphones delivering excellent sound
and noise handling performance for location and studio applications.
Mixer/Recorder/Headphone
Professional Mixer for location and Recorder and Headphone for
general purpose applications
“
The Sony solution proved
again that it’s top notch
Markus Lempsch,
Ryan Leslie European Stage Manager
”
Superior digital sound quality
and multi-channel operation
Created for use in live events and
in broadcast TV studios, the DWX
range seamlessly brings UHF
wireless microphone technology
into the digital domain. DWX is the
no-compromise, ultimate quality
choice, whatever your gig.
High-quality sound with
Sony’s original codec
High RF stability and minimized interference
RF remote control
supports improved workflow
Greater flexibility with multi-channel operation
Secure audio transmission
DWX
The digital wireless system
for the digital moment
DWX Series
Sony’s New DWX™
Boosts Sound Quality and Operational Convenience
With its new, cutting-edge digital wireless microphone
system, Sony combines advanced digital technologies,
world-leading analog microphone expertise, wireless
audio transmission technologies, and an enviable
reputation for stability.
By incorporating the very latest digital technologies,
the DWX is set to revolutionize live stage
performances...in much the same way as the music
recording industry changed when Sony applied
advanced digital technologies to recorders, mixing
consoles, and signal processing equipment.
The DWX ensures superb sound quality, convenient
multi-channel operation, and innovative workflow
without compromise.
Once again, Sony opens new doors to the digital world.
DWX Series
Technologies
Sony’s Original Wireless Interface, WiDIF™-HP
A new high-profile format for the digital audio interface on UHF - WiDIF-HP – has been developed for the DWX.
WiDIF-HP transmits high-quality 24-bit/48-kHz sampling digital audio signals in
real time, with a wide dynamic range of more than 106 dB, a wide frequency
response of 20 Hz to 22 kHz, and a low system latency of 3.4 ms*. Additionally,
there is no compander, a device commonly used in conventional analog wireless
systems which can degrade audio performance.
■ Frequency Response
Response [dB]
Superb Quality Wireless Transmission
■ Dynamic Response
Greater Flexibility with Multi-channel Operation
WiDIF-HP enables large-scale multi-channel operation. Thanks to a digital
modulator, WiDIF-HP realizes inter-modulation-free, equally spaced channel
allocation, which enables a significant increase in the number of simultaneous
digital wireless systems in comparison with current analog wireless systems. For
example, up to 12 channels of simultaneous operation are supported using a 6MHz bandwidth TV channel in the USA. WiDIF-HP supports approximately 50
percent more systems simultaneously than current analog wireless systems.
This format allows the use of existing WL-800 Series analog wireless channel plans.
In this configuration, the DWX reliably operates along with WL-800 Series analog
wireless systems, with no risk of analog/digital wireless system interference.
Analog System
Digital System
■ More Simultaneous Multi-channel Operations
Inter-modulation free special channel allocation is necessary.
Equally spaced easy channel allocation is available.
DWX Series
Technologies
Stable and Secure Transmission
WiDIF-HP allows highly stable wireless transmission without audio degradation
- transmission that is both secure and extremely tolerant to interference waves.
The format is digitally modulated and encrypted to minimize any risk of
interception, providing highly secure transmission. For confidential
communication, WiDIF-HP provides two communication modes:
Secure key mode: Wireless communication between a transmitter and
receiver can be established by exchanging an
encryption key that is generated by the transmitter.
Password mode: Multiple transmitters and receivers can be configured
by setting all devices with the same user-designated
password. In addition, password mode is for broadcast
communication, enabling multiple receivers to receive
audio signals from a single transmitter.
WiDIF-HP Specifications
Sampling frequency
48 kHz
Quantization bit length
24 bit
Frequency response
20 Hz to 22 kHz
Dynamic range
106 dB typical (A-weighted)
Distortion (T.H.D)
0.03% or less
Occupied RF bandwidth
192 kHz or less
Modulation method
π/4 Shift QPSK
Audio delay
3.4 ms*
* When DWM-01 and DWR-R01 are used in combination.
Innovative Monitor/Control Function, Cross Remote™
WiDIF-HP transmits high-quality 24-bit/48-kHz
sampling digital audio signals in real time, with a
wide dynamic range of more than 106 dB, a wide
frequency response of 20 Hz to 22 kHz, and a low
system latency of 3.4 ms*. Additionally, there is no
compander, a device commonly used in conventional
analog wireless systems which can degrade audio
performance.
Meta Data on
WiDIF-HP
Control Data on
Ethernet
DWX Series
Products
Sony is renowned for innovation in digital audio. Now, all of this expertise and legendary performance is
available in a digital wireless microphone system using UHF frequency range.
DWM-02
Handheld digital
wireless microphone
• Superb audio quality by using 24bit/48KHz
high class AD - convertor
• Simultaneous multi-channel operation
• Three interchangeable heads and third party
support
• Robust 31.3mm/pitch 0.1mm threading
interchangeable mechanism for quick
change (Shure mount, over 50 capsules
from various manufacturers will work on the
DWM-02)
• Remote control of transmitter functions from
the receiver
• Selectable RF output power (1/10/50 mW)
• Digital low-cut filter
• Up to 72MHz bandwidth
• Superb audio quality by using
24bit/48KHz high class AD - convertor
• Unlimited simultaneous multi-channel
operation*
• Lightweight and rugged design
• Switchable mic or line input level
and adjustable attenuator
• 48V phantom power
• OLED display
• RF remote for all functions by Wireless
Studio remote software
• Up to 72MHz bandwidth
CU-F31
• Condenser type
• Cardioid
• 60 Hz - 20 kHz
• Dynamic type
• Super cardioid
• 60 Hz - 18 kHz
Capsule Unit
Capsule Unit
CU-F32
DWA-CU01NM
• Dynamic type
• Wide cardioid
• 70 Hz - 18 kHz
• Microphone adapter
for 3rd party capsule
Capsule Unit
DWT-B01
Belt-pack digital
wireless transmitter
CU-C31
Microphone adapter
DWT-P01
ECM-77BC
Lavalier
Microphone
ECM-66BC
Lavalier
Microphone
ECM-44BC
Lavalier
Microphone
ECM-FT5BC
Flat Lavalier
Microphone
ECM-55BC
Lavalier
Microphone
Plug-on digital wireless
transmitter
• Superb audio quality by using
24bit/48KHz high class AD - convertor
• Unlimited simultaneous multi-channel
operation*
• Lightweight and rugged design
• Switchable mic or line input level
and adjustable attenuator
• 48V phantom power
• OLED display
• RF remote for all functions by Wireless
Studio remote software
• Up to 72MHz bandwidth
*Bandwidth of the device is limiting the number of
simultaneous channels.
DWX Series
Products
WD-850
DWR-R02D
2 channel rack-mount
digital wireless receiver
• Superb quality 24-bit/48kHz sampling digital audio
• Simultaneous multi-channel operation
• Unlimited number of simultaneous channels (500KHz spacing)
• Remote control of transmitter functions from the receiver
• Full control over cross-remote via Wireless Studio software
• 1U-size rack-mountable design
• Supports a variety of output functions such as XLR and BNC for
AES3 digital, and GND lift function for analogue BAL output
• Supports a variety of output functions with two AES3/EBU outputs
up to 24-bit/96 kHz plus World Sync input/output
• Flexible AC/DC power options
• Up to 72MHz bandwidth
Antenna divider
• Antenna signal output to up to four receivers
• Cascade output connectors allowing simultaneous use of up to two WD-850
channel dividers
• 2-channel antenna input connectors
• Power supplied to the Sony UHF antenna
DWA-01D
Digital wireless adapter
• For use with DWR-S01D or DWR-S02D receiver
• Stand-alone wireless receiver operation
• Wide array of interfaces including two-channel
AES3 digital or analogue output
• Unique lock-together mechanism to allow two
DWA-01D adaptors to be easily combined
• Supports V-mount attachment
• Hirose 4-pin DC powering
DWR-S02D
2 channel slot-in
portable digital
wireless receiver
• Superb audio quality by AES3 out and
24Bit/48kHz D/A conversion
• Various viewfinder functions
with Sony XDCAM camcorders
• Full digital workflow with Sony XDCAM camcorders
• Up to 72MHz bandwidth
• Active/Free channel scan
DWA-F01D
Digital wireless adapter
• For use with DWR-S01D or DWR-S02D receiver
• Stand-alone wireless receiver operation
• Top-panel operation for mixer bag
• Three-way powering (Hirose 4-pin DC powering,
DC In and NP-Batteries)
• Three-parallel audio output, including XLR
analogue output, BNC AES/EBU digital output
and mini-phone analogue output
DWX Series
Accessories
AN-01
AN-57
• Log-periodic antenna
• Uni-directional
• Built-in booster
• Ground plane antenna
• Horizontal omni-direction
UHF Antenna
UHF ground
plane antenna
AN-820
RMU-01
UHF Antenna
Remote Control Unit
• Dipole antenna
• Horizontal omni-direction
• Built-in booster
• Extension of Cross Remote
function
• Control of up to 82ch transmitter
• Two-way powering
GC-0.7CP
/S: Straight plug
/R: Right-angle plug
Wireless Studio
LCS-F01D
CBK-55BK
• Bundled application for PC
• Full control of all system
parameters on receiver and transmitter
• Channel plan adviser
• RF Chart Grapher / RF Chart Analyser
• Soft case for DWA-F01D
• Shoulder strap is included
• Support V-mount attachment
• Shoulder pad and additional interface
for the PMW-F55/F5
• Supports Wireless slot-in audio receiver
(WRR-855S/DWR-S01D/DWR-S02D)
PC Software
Soft Carrying Case
EFP-Style Buildup Kit for F55/F5
EC-1.5CF
Microphone cable
CBK-55BK with
PMW-F55 & WRR-855S
DWX Series
For Shoulder Camcorders
The DWR-S02D can be inserted into wireless slot of Shoulder camcorders or mounted on top the Battery.
A-8278-057-B
+
Mounting Bracket
On Top of the Battery
Supplied accessories
A-1999-908-B
DWA-01D
Mounting Bracket for PMW-F5 /F55,
PMW-400/580 and AX-R5
Frequencies
UC
CE
CN
J
Operating
Frequencies
470 MHz to 542 MHz
version
UC14
UC30 *1
UC42
Selectable
Frequencies
564 ( in 125kHz steps)
2772 ( in 25kHz steps)
517 ( in 125kHz steps)
2541 ( in 25kHz steps)
470 ( in 125kHz steps)
2310 ( in 25kHz steps)
566 MHz to 630 MHz
566 MHz to 638 MHz
638 MHz to 694 MHz
638 MHz to 698 MHz
710 MHz to 782 MHz
version
CE33
CE42
CE51
Selectable
Frequencies
504 ( in 125kHz steps)
2560 ( in 25kHz steps)
441 ( in 125kHz steps)
2240 ( in 25kHz steps)
567 ( in 125kHz steps)
2880 ( in 25kHz steps)
version
CN29
Selectable
Frequencies
441 ( in 125kHz steps)
2240 ( in 25kHz steps)
806 MHz to 810MHz
version
JB
Selectable
Frequencies
30 ( in 125kHz steps)
*1 566 MHz to 608 MHz and 614 MHz to 638 MHz
DWX Series
Specifications
CU-C31
CU-C31 Polar pattern
30
20
10
Level[dB]
Capsule type
0
30
60
60
0
90
-10
90
-20
120
120
Directivity
Uni-directional (Cardioid)
Sensitivity
–48 dB (0 dB=1 V/Pa, 1 kHz)
Frequency response
150
10
100
1000
150
Frequency[Hz]
On axis
90°
Dimensions
Mass
Capsule type
CU-F31
Dynamic
400Hz
1000Hz
4000Hz
180°
CU-F31
CU-F31 Polar pattern
30
20
10
60
0
Level[dB]
Storage temperature
180
10000
90
-10
5
0
-5
-10
-15
-20
-25
0
30
60
90
-20
120
120
Directivity
Uni-directional (Super cardioid)
Sensitivity
–54 dB (0 dB=1 V/Pa, 1 kHz)
Frequency response
Operating temperature
-30
150
150
-40
10
100
1000
Frequency[Hz]
On axis
90°
400Hz
1000Hz
4000Hz
180°
CU-F32
30
10
60
0
90
-10
5
0
-5
-10
-15
-20
-25
Capsule type
0
30
60
90
-20
120
120
-30
150
-40
10
Dimensions
Mass
CU-F32 Polar pattern
20
Level[dB]
Storage temperature
180
10000
100
1000
10000
Frequency[Hz]
On axis
90°
400Hz
180°
4000Hz
60 Hz to 18 kHz
0 °C to 50 °C
(32 °F to 122 °F)
–20 °C to +60 °C
(–4 °F to +140 °F)
Φ47.6 mm x 77.4 mm
Approx. 150 g
CU-F32
Dynamic
Directivity
Uni-directional (Cardioid)
Sensitivity
–54 dB (0 dB=1 V/Pa, 1 kHz)
Frequency response
70 Hz to 18 kHz
Operating temperature
0 °C to 50 °C
(32 °F to 122 °F)
150
Storage temperature
180
60 Hz to 20 kHz
0 °C to 50 °C
(32 °F to 122 °F)
–20 °C to +60 °C
(–4 °F to +140 °F)
Φ47.6 mm x 61.5 mm
Approx. 130 g
Operating temperature
-30
-40
CU-C31
Electret condenser
1000Hz
Dimensions
Mass
–20 °C to +60 °C
(–4 °F to +140 °F)
Φ47.6 mm x 77.4 mm
Approx. 150 g
DWX Series
Specifications
DWT-B01 Bodypack transmitter
Wireless Interface
Oscillator Type
Antenna Type
Type of Emission
UC
Carrier Frequencies
RF Power
E7
CN
J
UC
CE7
CN
J
Input Connector
Phantom Power Voltage
DWM-02 Handheld wireless microphone
DWT-P01 Plug-on transmitter
WiDIF-HP
Crystal-controlled PLL Synthesizer
λ/4 flexible wire
G1E or G1D
U1424: 470.125 MHz to 541.875 MHz (TV-14 to TV-25 channels), 125 kHz steps
U3040: 566.125 MHz to 637.875 MHz (TV-30 to TV-41 channels, except TV-37channel), 125 kHz steps
U4250: 638.125 MHz to 697.875 MHz (TV-42 to TV-51 channels), 125 kHz steps
CE3338: 566.025 MHz to 630.000 MHz (TV-33 to TV-40 channels), 25 kHz steps
CE4248: 638.025 MHz to 710.000 MHz (TV-42 to TV-50 channels), 25 kHz steps
CE5157: 710.025 MHz to 782.000 MHz (TV-42 to TV-50 channels), 25 kHz steps
CN2935: 638.025 MHz to 694.000 MHz (TV-29 to TV-35 channels), 25 kHz steps
JB: 806.125 MHz to 809.750 MHz (B band), 125 kHz steps
1 mW/10 mW/50 mW (e.r.p) selectable
1 mW/10 mW/50 mW (e.r.p) selectable
1 mW/10 mW/50 mW (e.r.p) selectable
1 mW/10 mW (e.r.p) selectable
Sony 4-pin (SMC9-4S) (female)
XLR-3-11C (female)
+48 V
Reference Input Level
MIC: -60 dBV (-58 dBu), 1 kHz (at 0-dB attenuator level)
LINE: +4 dBu, 1 kHz
-
MIC: -60 dBV (-58 dBu), 1 kHz (at 0-dB attenuator level)
LINE: +4 dBu, 1 kHz
Maximum Input Level
MIC: -22 dBu (with 0 dB attenuator)
LINE: +24 dB
–16 dBu (with 0 dB attenuator)
MIC: -22 dBu (with 0 dB attenuator)
LINE: +24 dB
Audio Attenuator Adjustment Range
Frequency Response
Dynamic Range
Distortion (T.H.D)
Audio Delay
Wireless Remote Control
Display
Power Requirements
Battery Operating Time
0 to 48 dB (3 dB steps, MIC input mode only)
Transmission: 20Hz to 22kHz (typical)
106 dB typical (A-weighted, T.H.D=1%)
0.03% or less (0 dBu = 0.775 Vrms)
Approx. 5 hours with Sony's AA-size alkaline (LR6) batteries at 25℃(77°F) at 10-mW output (with the wireless
remote control function off and DIMMER MODE set to AUTO OFF)
Mass
Supplied Accessories
0 to 48 dB (3 dB steps, MIC input mode only)
Transmission: 20Hz to 22kHz (typical)
106 dB typical (A-weighted, T.H.D=1%)
0.03% or less (0 dBu = 0.775 Vrms)
Approx. 5 hours with Sony's AA-size alkaline (LR6)
batteries at 25℃(77°F) at 10-mW output
(with the wireless remote control function off and
DIMMER MODE set to AUTO OFF, and +48V set to OFF)
0°C to 50°C (32°F to 122°F)
-20°C to +60°C (-4°F to +140°F)
Operating Temperature
Storage/Transport Temperature
Dimensions
0 dB to 21 dB (in 3-dB steps)
Transmission: 20Hz to 22kHz (typical)
Approx. 1.5 msec
Cross Remote (2.4-GHz IEEE802.15.4 compliant)
OLED
DC 3.0 V (with two AA-size alkaline (LR6) batteries)
63 x 17 x 73 mm (excluding the anntenas)
(W x H x D)
Ø37.1 x 194 mm
44 x 78 x 44 mm (excluding protrusions)
(W x H x D)
Approx. 125 g (including batteries)
Approx. 235 g (including batteries)
Approx. 245 g (including batteries)
Spare battery case (1), Soft case (1), Microphone cable (4- Identification ring (1 set), Microphone holder (1), USB Spare battery case (1), Soft case (1), USB adapter cable
adapter cable (1), USB cable (1), Carrying case (1),
(1), USB cable (1), CD-ROM (1)
pin to XLRtype 3-pin) (1), USB adapter cable (1), USB
Stand adaptor (1), For the model available in the
cable (1), Carrying case (1), Scribble sheet (1), CD-ROM
U.S.A.: PF1/2 to W5/8 type, For the model available in
(1)
Europe.: PF1/2 to W3/8 type, CD-ROM (1)
*0dBμV= 1μV EMF, 0dBu=0.775Vrms, 0dBV=1V, 0dB SPL=2x10-5 Pa
DWX Series
Specifications
Wireless Interface
Oscillator Type
Reception Type
Circuit system
Antenna Type
Antenna Input Connector
Antenna Cascaded Output
UC
Carrier Frequencies
CE7
J
Frequency Response
Dynamic Range
Distortion (T.H.D)
DWR-R02D Rack-mount receiver
DWR-S02D Slot-in receiver
WiDIF-HP
Crystal-controlled PLL Synthesizer
True diversity
Double Superheterodyne
Detachable
BNC-R, 50 Ω (x2)
BNC-R, 50 Ω (x2)
U1424: 470.125 MHz to 541.875 MHz (TV-14 to TV-25 channels),
125 kHz steps
WiDIF-HP
Crystal-controlled PLL Synthesizer
True diversity
Double Superheterodyne
Detachable
BNC-R, 50 Ω (x2)
U1424: 470.125 MHz to 541.875 MHz (TV-14 to TV-25
channels), 125 kHz steps
U3040: 566.125 MHz to 637.875 MHz (TV-30 to TV-41 channels,
except TV-37channel), 125 kHz steps
U3040: 566.125 MHz to 637.875 MHz (TV-30 to TV-41
channels, except TV-37channel), 125 kHz steps
U4250: 638.125 MHz to 697.875 MHz (TV-42 to TV-51 channels),
125 kHz steps
CE3338: 566.025 MHz to 630.000 MHz (TV-33 to TV-40 channels),
25 kHz steps
CE4248: 638.025 MHz to 710.000 MHz (TV-42 to TV-50 channels),
25 kHz steps
CE5157: 710.025 MHz to 782.000 MHz (TV-42 to TV-50 channels),
25 kHz steps
770.250 MHz to 809.750 MHz (FPU-1 to FPU-4, B band), 125 kHz
steps
20Hz to 22kHz (typical)
106 dB or more typical (A-weighted, T.H.D=1%)
0.03% or less (0 dBu = 0.775 Vrms)
U4250: 638.125 MHz to 697.875 MHz (TV-42 to TV-51
channels), 125 kHz steps
CE3338: 566.025 MHz to 630.000 MHz (TV-33 to TV-40
channels), 25 kHz steps
CE4248: 638.025 MHz to 710.000 MHz (TV-42 to TV-50
channels), 25 kHz steps
CE5157: 710.025 MHz to 782.000 MHz (TV-42 to TV-50
channels), 25 kHz steps
770.250 MHz to 809.750 MHz (FPU-1 to FPU-4, B band), 125
kHz steps
20Hz to 22kHz (typical)
106 dB or more typical (A-weighted, T.H.D=1%)
0.03% or less (0 dBu = 0.775 Vrms)
Approx. 2.1 msec (Analog output in combination with the
DWA-01D/F01D)
Approx. 1.9 ms (analog output)
Audio Delay
Approx. 1.9 ms (digital output)
BAL: XLR-3-32 (male), 47 Ω or less (×2)
D-sub 15 pin (male) (×1)
Analog: Reference output level: –40 dBu
Digital Output
Headphone Output
WORD SYNC IN/OUT
connectors
Wireless Remote Control
LAN Connector
Display
Power Requirements
Operating Temperature
Storage/Transport Temperature
Dimensions
Mass
Supplied Accessories
(when UNBAL ATT =0 dB)
XLR-3-32 (male), 110 Ω (×1)
BNC-R, 75 Ω (×1)
Reference output level (0 dBu = 0.775 Vrms) –36 dBFs
Ø6.3 mm (1/4 inch) stereo jack
Digital: Reference output level: –36 dBFS/–20 dBFS
(switchable)
*0dBμV= 1μV EMF, 0dBu=0.775Vrms, 0dBV=1V, 0dB SPL=2x10-5 Pa
Antenna Input
BNC-R, 50 Ω (x4),
(2 inputs 2 channels)
DC 9V/OFF switchable (supplied
through the antenna input
connectors)
Output Connector
BNC-R, 50 Ω (x8),
(4 outputs 2 channels)
Cascaded Output
BNC-R, 50 Ω (x2),
(1 input 2 channels)
RF Transmission Loss
Inter-Connector Connection
Loss
±3 dB (between antenna input to
output)
15 dB or more
Input/Output VSWR
3.0 or less
Power Requirements
US: 120 V AC, 60 Hz
CE: 230 V, 50 Hz
J: AC l00V, 50Hz/60Hz
Power Consumption
18 W (when 100 mA is being
supplied to the antenna booster)
Operating Temperature
Storage/Transport
Temperature
Dimensions
Mass
0°C to 50°C
32°F to 122°F
-20°C to +60°C
-4°F to +140°F
Approx. 482 × 44 × 285 mm (W x
H x D)
Approx. 19 x 1 3/4 x 11 1/4 inches
(W x H x D)
Approx. 4.4 kg
Approx. 9 lb 11 oz
50 Ω terminator (6)
Supplied Accessories
-
Input connector: BNC-R with a 75 Ω termination switch
Output connector: BNC-R
External Word Sync: 32 kHz to 96 kHz
Cross Remote (2.4-GHz IEEE802.15.4 compliant)
RJ-45 modular jack 100BASE-TX: IEEE802.3u compliant
OLED
AC: 100 to 240 V 0.4 A or less
DC: 12 V 1.6 A or less
0°C to 50°C (32°F to 122°F)
°
-20 C to +60°C ( -4°F to +140°F)
482 x 44 x 335 mm (W x H x D)
Approx. 4.1 kg (including the attached antenna)
Whip antenna (2), Antenna mount with BNC connector (2), AC
power cord (1), Foot (4), Operating Instructions (CD-ROM) (1), PC
control software (CD-ROM) (1)
Input/Output
General
BAL: +24 dBu maximum/–12 dBu reference
(when LINE output)
US : 470 to 806 MHz
CE : 470 to 862 MHz
J : 770 to 810 MHz
connection with a camcorder)
Output level (0 dBu = 0.775 Vrms)
BAL: –22 dBu maximum/–58 dBu reference
(when MIC output)
UNBAL: +8 dBu maximum/–28 dBu reference
Frequency Range
Supply Voltage For Booster
Approx. 1.9 msec (AES/EBU output incombination with the
DWA-01D/F01D and through a digital
UNBAL: Ø6.3 mm (1/4 inch) mono jack, 220 Ω or less (×2)
Analog Output
WD-850 UHF Antenna Divider
Cross Remote (2.4-GHz IEEE802.15.4 compliant)
OLED
7 V DC
0°C to 50°C (32°F to 122°F)
-20°C to +60°C ( -4°F to +140°F)
88 x 119 x 31 mm (W x H x D)
Approx. 280 g (including the supplied antennas)
Whip antenna (2), USB adapter cable (1), USB cable (1), CDROM (1), Frequency band label (1)
AC power cord (1)
Operating Instructions (1)
DWX Series
Specifications
DWA-01D Wireless Adapter DWA-F01D Wireless Adapter
AN-01 UHF Antenna
AN-57 Ground Plane Antenna
470 to 862 MHz
638 MHz to 810 MHz (When
supplied elements are attached:
470 MHz to 638 MHz)
Audio
output
connector
Analog/Digital: SMC9-4S
(female) (OUTPUT1/2)
Analog: XLR-3-32 type
(OUTPUT 1/OUTPUT 2)
Digital: BNC-R
Analog
output
impedance
150 ohms or less
150 ohms or less
Antenna gain
5 dBi or more
0 dBi (from center frequency)
2.5 or less
75 ohms
Voltage
standing wave
ratio
3 or less
(from center frequency)
AES3-id
output
impedance
WORD
SYNC IN
connector
OUTPUT 1/2
or Phones
connector
OUTPUT 1/2
or Phones
level
Power
requirements
Operating
voltage
Maximum
continuous
operation
110 ohms
BNC-R, 75 ohms (when the
BNC-R, 75 ohms (when the
DWR-S02D is attached to the DWR-S02D is attached to the
adapter and 75-ohm
adapter and 75-ohm
termination is added)
termination is added)
Ø 3.5 mm TRS jack
Ø 3.5 mm TRS jack
MIC LEVEL selected: –52 dBu
50 mW
PHONES selected: 50 mW (16(16-ohm load, at T.H.D = 1%)
ohm load, at T.H.D = 1%)
470 to 862 MHz
-
18 dB/10 dB/0 dB, switchable
-
Output
impedance
50 ohms
Impedance 50 Ω
(representative value)
Booster Voltage
standing wave
ratio
3 or less
-
6 dB or less
-
60 dB or more (95 dBμVEMF
input)
-
Booster
Frequency
range
Booster gain
10 V DC to 17 V DC
Third order
intermodulation
Output
connector
BNC-R type
BNC-R type
Supply voltage
9 V/12 V DC
-
-
Approx. 5 hours (ambient
temperature of 25 °C (77 °F),
°F), fully charged Sony NPF570 lithium-ion battery,
OUTPUT 1/2 unused, DWRS01D CH1/CH2 ON, wireless
remote control function OFF,
auto switch for display set to
AUTO DIMMER)
100 mA or less
-
Storage
temperature
–20 °C to +60 °C
(–4 °F to +140 °F)
–20 °C to +60 °C
(–4 °F to +140 °F)
Approx. 88 × 144 × 31.5 mm Approx. 142 × 125 × 39 mm
(W x H x D)
(W x H x D)
Approx. 400 g (excluding
Approx. 330 g
receiver and battery)
DC power cable (for 4-pin
DC power cable (for 4-pin
connector) (1),
connector) (1), Operating
Mount plate (1),
Instructions (1), CD-ROM (1)
Audio cable (2)
Noise figure
Current
consumption
Operation
temperature
Storage
temperature
Dimensions
Mass
Supplied
accessories
Radio system
Frequency range
of transmission/
Reception
Antenna gain
0 °C to 50 °C
(32 °F to 122 °F)
–20 °C to +60 °C
(–4 °F to +140 °F)
-
Ø121 × 288 mm (When supplied
supplied elements are attached:
Ø153 × 320 mm)
Approx. 530 g
Approx. 280 g
Microphone stand attachment
pole/ grip (1 set),
Stand Adapter, PF1/2 to W5/8
type (1),
PF1/2 to W3/8 type (1),
Operating Instructions (1)
Antenna Elemens (4),
Operating Instructions (1)
2405 MHz to 2480 MHz
2 dB
1 mW
Remote control
distance
10 m (33 feet) at maximum
(per unit)
LAN transmission
speed
10 M/100 Mbps
(automatic detection)
Storage
temperature
LAN connector: RJ45-type, eightpin
(accepts PoE power)
When the PoE device is used: 48 V
DC
When the AC adapter is used: 12 V
DC
When the PoE device is used: 50
mA or less
When the AC adapter is used: 100
mA or less
Conforms to IEEE802.3af (supports
mode A and B)
When the PoE device is used: 0 °C
to 50 °C (32 °F to 122 °F)
When the AC adapter is used: 0 °C
to 45 °C (32 °F to 113 °F)
–20 °C to +60 °C
(–4 °F to +140 °F)
Dimensions
107 × 151 × 30 mm (W x H x D)
Supply voltage
Current
consumption
PoE power
reception
Operation
temperature
Mass
-
Approx. 343 × 341 × 36 mm
(W x H x D)
Conforms to IEEE802.15.4
Antenna power
Connectors
10 V DC to 17 V DC (DC IN),
6 V DC to 8.4 V DC (battery)
0 °C to 50 °C
(32 °F to 122 °F)
Supplied
accessories
Horizontal, omnidirectional
Directivity
12 V DC
0 °C to 50 °C
(32 °F to 122 °F)
Mass
Half power angle: 150 degrees
or less
Front to back ratio: 12 dB or
more
12 V DC (DC IN), 7.2 V DC
(battery)
Operating
temperature
Dimensions
Frequency
range
RMU-01 Remote Control Unit
Supplied
accessories
Approx. 300 g (10.5 oz)
AC adapter (1), Bracket (2),
Screw adapter (2), Screws (1 set),
Safety wire (1), Operating
Instructions (1), CD-ROM (1)
Ultimate Sound with Digital Audio Processing
High-quality Sound
Superior Operability
Low Profile and Lightweight
UWP
UHF Wireless
microphone package
Innovation in Sound - - Introducing the new UWP-D
Series wireless microphone system, which realizes
high-quality sound and stable wireless transmission
utilizing true diversity reception system
High-quality Sound with Digital Audio Processing
Innovation in Sound -- Introducing the new UWP-D Series wireless microphone system,
which realizes high-quality sound and stable wireless transmission utilizing true diversity reception system.
Since its introduction in 2003, the UWP Series has been widely used in a broad range of applications,
not only for ENG (electronic news gathering) and EFP (electronic field production), but also for live concerts, sporting events,
documentaries, and weddings.
High-quality Sound
Sony’s Digital Audio Processing technology improves transient response performance, and realizes high-quality sound.
Superior Operability
Performs channel settings via Automatic Channel Setting mode.
Low Profile and Lightweight
The small body size and lightweight design are ideal for use in small camcorders or interchangeable-lens digital cameras.
UWP-D11
UWP-D12
UWP-D16
UWP-D Series
Sony’s Digital Audio Processing
Sound quality is the most important issue in wireless transmission. Conventional analog systems make use of companders to provide the
required dynamic range. However, while compander systems have improved over time, their inherent problems with sound quality and
transient response performance have yet to be completely solved. Sony’s newly developed Digital Audio Processing, which uses DSP
(digital signal processing) for digital companding, realizes high sound quality.
DSP optimizes a time-constant range between the transmitter and receiver. It provides superb transient response performance. While
analog companding systems cannot reproduce sounds such as a bell or tee shot with precision, Sony’s Digital Audio Processing can
reproduce them very accurately.
Dynamic Response
Original Sound
Analog System
Digital Audio Processing
DSP also can correct characteristics of frequency response in the transmission
process for precise reproduction of original sounds.
UWP-D Series
Multi Interface Shoe Adaptor (Option)
The wireless receiver of the UWP-D Series can be
attached to camcorders or interchangeable-lens
cameras that have an MI (Multi-Interface) shoe
using the MI shoe adaptor. This eliminates the need
for connecting cables. By using the MI shoe adaptor,
audio signals can be transmitted from the wireless
receiver to a camera. In addition, the wireless receiver
can get power from the camera, and the camera can
control power ON/OFF, unifying power management*1.
XLR cable connection
MI Shoe connection
-Need audio cable
-Need AA alkaline battery
-Need On/Off manual operation
-No need audio cable
-Power supply from camera*1
-On/Off control from camera*1
*1 For details on cameras that support this unit, visit the Sony website.
UWP-D Series
Package Lineup
Frequencies as follows
UWP-D11
Omni-directional
Lavalier Microphone
UTX-B03 :
Bodypack Transmitter
URX-P03 :
Portable Receiver
Belt Clip
Microphone
Holder Clip
Shoe Mount
Adaptor
XLR-BMP
Cable
Stereo MiniBMP Cable
UC14
UC30
UC42
CE21
CE33
CE42
CE51
CN38
E
JB
KR3
UC14
UC30
UC42
CE21
CE33
CE42
CE51
CN38
E
JB
KR3
UC14
UC30
UC42
CE21
CE33
CE42
Windscreen
UWP-D12
Microphone
Holder Clip
UTX-M03 :
Handheld Wireless
Microphone
XLR-BMP
Cable
Stereo MiniBMP Cable
Belt Clip
Shoe Mount
Adaptor
URX-P03 :
Portable Receiver
UWP-D16
Omni-directional
Lavalier Microphone
Microphone
Holder Clip
XLR-BMP
Cable
Stereo MiniBMP Cable
E
Belt Clip
UTX-P03 :
Plug-on Transmitter
UTX-B03 :
Bodypack Transmitter
URX-P03 :
Portable Receiver
Shoe Mount
Adaptor
Windscreen
Soft Case
CE51
KR3
UWP-D Series
Products
UTX-B03
UTX-M03
・Sony’s Digital Audio Processing
・Compatibility with UWP Series / WL-800 Series
・Extremely compact, lightweight, and robust metal body
・USB for power supply or charging batteries
・Switchable MIC/LINE input level and adjustable
・attenuator (0 dB to 21 dB, 3-dB steps)
・Supplied with omni-directional lavalier microphone
・Sony’s Digital Audio Processing
・Incorporates an all-metal, robust, uni-directional dynamic
・microphone capsule with minimized popping and wind
noise
・Compatibility with UWP Series / WL-800 Series
・USB for charging batteries
・Interchangeable microphone capsule
UTX-P03
URX-P03
・Sony’s Digital Audio Processing
・Converts a wired microphone to a wireless microphone
・via an XLR-type connector
・Compatibility with UWP Series / WL-800 Series
・USB for power supply or charging batteries
・Extremely compact, lightweight, and robust metal body
・+48 V power supply
・Sony’s Digital Audio Processing
・Easy-to-use Automatic Channel Setting mode
・Space Diversity Reception System for stable reception
・Compatibility with UWP Series / WL-800 Series
・Headphone output for monitoring
・Extremely compact, lightweight, and robust metal body
・USB for power supply or charging batteries
・Output level control
Bodypack Transmitter
Handheld Wireless Microphone
Plug-on Transmitter
Portable Receiver
Accessories
ECM-V1BMP
AD-RV1B2
ECM-X7BMP
ECM-77BMP
ECM-44BMP
ECM-166BMP
ECM-FT5BMP
ECM-LZ1UBMP
ECM-322BMP
ECM-HZ1UBMP
Uni-directional,
Lavalier Microphone
Omni-directional
Lavalier Microphone
Omni-directional
Lavalier Microphone
Uni-directional
Lavalier Microphone
Omni-directional
Lavalier Microphone
Uni-directional
Lavalier Microphone
Omni-directional
Headset Microphone
Uni-directional
Headset Microphone
Omni-directional
Lavalier Microphone
Windscreen Pack
(5PCS)
SAD-HV1B2
Holder Clip Pack
(4PCS)
BATC-3AA
Battery Case
BLC-BP2
Belt Clip (2PCS)
SMAD-P2
Shoe Mount Adaptor
SMAD-P3
MI Shoe Mount
Adaptor
SAD-M01
Microphone Holder
EC-0.46BX
EC-1.5BX
EC-0.8BM
CU-C31
CU-F31
CU-F32
Capsule Unit
• Condenser type
• Cardioid
• 60 Hz - 20 kHz
Capsule Unit
• Dynamic type
• Super cardioid
• 60 Hz - 18 kHz
Capsule Unit
• Dynamic type
• Wide cardioid
• 70 Hz - 18 kHz
3-pole Locking Mini
Plug-XLR(M) Cable
3-pole Locking Mini
Plug-XLR(F) Cable
3-pole Locking Mini
Plug-Stereo Mini
Plug Cable
LCS-URXP3
Soft Case
UWP-D Series
How to Attach the Soft Case (Option)
For Handheld Camcorders
LCS-URXP3
Soft Case
On the Grip Belt
For Shoulder Camcorders
A-8278-057-B
V-Shoe Mount
Mounting Bracket
Direct Mount
Mounting Bracket
A-1528-515-A
SMAD-V1
Mounting Plate
V-Shoe Mount Adaptor
SMAD-V1
LCS-URXP3
On Top of the Battery
A-8278-057-B
V-Shoe Mount Adaptor
* Remove the V-Shoe part
Soft Case
LCS-URXP3
Soft Case
UWP-D Series
Frequencies
Operating
Frequencies
version
UC
CE
CN
470 MHz to 542 MHz 566 MHz to 630 MHz 566 MHz to 638 MHz 638 MHz to 694 MHz 638 MHz to 698 MHz 710 MHz to 782 MHz 794 MHz to 806 MHz 806 MHz to 810 MHz 925 MHz to 937 MHz
UC30*1
UC14
UC42
Selectable
564 (in 125-kHz steps)
517 (in 125-kHz steps)
470 (in 125-kHz steps)
Frequencies
2772 (in 25-kHz steps)
2541 (in 25-kHz steps)
2310 (in 25-kHz steps)
version
CE21
CE33
CE42
CE51
Selectable
567 (in 125-kHz steps)
504 (in 125-kHz steps)
441 (in 125-kHz steps)
567 (in 125-kHz steps)
Frequencies
2880 (in 25-kHz steps)
2560 (in 25-kHz steps)
2240 (in 25-kHz steps)
2880 (in 25-kHz steps)
version
CN38
Selectable
567 (in 125-kHz steps)
Frequencies
2880 (in 25-kHz steps)
version
E
E
Selectable
94 (in 125-kHz steps)
Frequencies
version
J
J
Selectable
94 (in 125-kHz steps)
Frequencies
version
KR
KR3
Selectable
94 (in 125-kHz steps)
Frequencies
*1 566 MHz to 608 MHz and 614 MHz to 638 MHz
Specifications
UTX-M03
Frequency Response Characteristics
Directivity
Characteristics (1kHz)
ECM-V1BMP
Frequency Response Characteristics
Directivity
Characteristics (1kHz)
Model Code
Frequency Response
Directivity
Capsule Type
Sensitivity
Dynamic Range
Maximum Input
Sound Pressure Level
Microphone Head
Mic Cable
Power Requirements
Supplied Accessories
ECM-V1BMP
40 Hz to 20 kHz
Omni-directional
Condenser
–43.0 dB ±3.0 dB (1 kHz/Pa)
86 dB or more
120 dB SPL
Ф6.8 x 19.5 mm
(9/32 X 25/32 inches)
(diameter/length)
1.2 m (3.9 feet)
DC 5 V
Windscreen (1)
Horizontal Clip (1)
UWP-D Series
Specifications
UTX-B03 Bodypack transmitter
UTX-M03 Handheld wireless microphone
Oscillator Type
UTX-P03 Plug-on transmitter
Crystal-controlled PLL Synthesizer
Antenna Type
1/4 wave length wire
1/4 wave length wire (internal)
Type of Emission
Integral type
F3E
UC14 : 470.125 MHz to 541.875 MHz
UC
URX-P03 Portable receiver
Oscillator Type
Crystal-controlled PLL Synthesizer
Antenna Type
Type of Emission
True diversity
1/4 wave length wire
UC14 : 470.125 MHz to 541.875 MHz
UC30 : 566.125 MHz to 607.875 MHz and 614.125 MHz to 637.875 MHz
UC42 : 638.125 MHz to 697.875 MHz
UC
CE21 : 470.025 MHz to 542.000 MHz
CE33 : 566.025 MHz to 630.000 MHz
CE7
Carrier
Frequencies
CN38 : 710.025 MHz to 782.000 MHz
E
J
-
JB: 806.125 MHz to 809.750 MHz
KR
30 mW / 5 mW
-
J
-
10 mW / 2 mW
Directivity
Input Connector
Phantom Power Voltage
Reference Input Level
Maximum Input Level
Audio Attenuator
Adjustment Range
UC/CE7/
CN/KR/E
J
Dynamic
CN38 : 710.025 MHz to 782.000 MHz
E
E: 794.125 MHz to 805.875 MHz
J
JB: 806.125 MHz to 809.750 MHz
KR
KR3: 925.125 MHz to 937.500 MHz
Frequency Response
23 Hz to 18 kHz (tyipcal)
Signal-to-Noise Ratio
96 dB (max deviation, A-weighted)
0.9% or less (-60 dBV, 1 kHz input)
Omni-directional
Uni-directional
-
-
XLR-3-11C (female)
MIC: -60 dBV (at 0-dB attenuator level) / LINE:
+4 dBu
-
-
151 dB SPL (at 21-dB attenuator level)
+48V
MIC: -60 dBV (at 0-dB attenuator
level) / LINE: +4 dBu
-
Distortion (T.H.D)
-
Analog Output
3-pole mini jack, unbalanced
0 dB to 21 dB (in 3-dB steps): Mic input
0 dB to 21 dB (in 3-dB steps)
0 dB to 21 dB (in 3-dB steps): Mic
input
Analog Output Level
-60 dBV (at ±5 kHz deviation)
Transmission: 23 Hz to 18 kHz (typical)
Transmission: 40 Hz to 15 kHz (typical)
Transmission: 23 Hz to 18 kHz (typical)
Capsule Unit: 70 Hz to 18 kHz
Transmission: 23 Hz to 15 kHz (typical)
Capsule Unit: 70 Hz to 18 kHz
Transmission: 23 Hz to 18 kHz (typical)
-
Headphone Output Level
Display
32 kHz / 32.382 kHz / 32.768 kHz
Display
Headphone Output
Pilot Tone Signal
Approx. 0.35 msec
Pilot Tone Signal
Audio Delay
Audio Attenuator Adjustment Range
96 dB (max deviation, A-weighted)
Audio Delay
Battery Operating Time
-
CE42 : 638.025 MHz to 694.000 MHz
3-pole locking mini jack
Signal-to-Noise Ratio
Power Requirements
10 mW / 2 mW
Electret condenser
CE33 : 566.025 MHz to 630.000 MHz
CE51 : 710.025 MHz to 782.000 MHz
CN
30 mW / 5 mW
CN
Capsule Type
CE7
40 mW / 5 mW
KR/E
Power Requirements
LCD
DC 3.0 V (with two AA-size alkaline (LR6) batteries)
Battery Operating Time
DC 5.0 V (via USB micro-B)
UC: Approx. six hours with Sony's AAsize alkaline (LR6) batteries at 25ºC
(77ºF) at 50-mW output
UC/CE7/CN: Approx. eight hours with Sony's AA-size alkaline (LR6) batteries at 25ºC (77ºF) at
CE7: Approx. eight hours with Sony's
30-mW output
AA-size alkaline (LR6)batteries at 25ºC
E/KR3/J: Approx. 10 hours with Sony's AA-size alkaline (LR6) batteries at 25ºC (77ºF) at 10-mW
(77ºF) at 30-mW output
output
E/KR3: Approx. 10 hours with Sony's
AA-size alkaline (LR6)batteries at 25ºC
(77ºF) at 10-mW output
Storage/ Transport
Temperature
Mass
Carrier Frequencies
KR3: 925.125 MHz to 937.500 MHz
CE7
RF Power
Dimensions
CE21 : 470.025 MHz to 542.000 MHz
E: 794.125 MHz to 805.875 MHz
UC
Frequency
Response
UC42 : 638.125 MHz to 697.875 MHz
CE42 : 638.025 MHz to 694.000 MHz
CE51 : 710.025 MHz to 782.000 MHz
CN
UC30 : 566.125 MHz to 607.875 MHz and 614.125
MHz to 637.875 MHz
-20ºC to +55ºC (-4ºF to +131ºF)
63 x 82 x 20 mm (2 1/2 x 3 1/4 x 13/16 inches)
(excluding the anntenas) (W x H x D)
ø48 x 260 mm (1 15/16 x 10 1/4 inches)
(diameter / length)
Approx. 149 g (5.3 oz) (including batteries)
Approx. 296 g (10 oz) (including batteries)
Operating Temperature
Storage/ Transport Temperature
Dimensions
Mass
Approx. 0.35 msec
-12 dB to +12 dB (3-dB step)
ø3.5 mm (5/32 inch) stereo mini jack
5 mW (at 16-ohm load)
32 kHz / 32.382 kHz / 32.768 kHz
LCD
DC 3.0 V (with two AA-size alkaline (LR6) batteries)
DC 5.0 V (via USB micro-B)
Approx. six hours with Sony's AA-size alkaline (LR6)
batteries at 25ºC (77ºF)
0ºC to 50ºC (32ºF to 122ºF)
-20ºC to +55ºC (-4ºF to +131ºF)
63 x 82 x 23.8 mm (2 1/2 x 3 1/4 x 15/16 inches)
(excluding the anntenas) (W x H x D)
Approx. 176 g (6.2 oz) (including batteries)
*0dBμV= 1μV EMF, 0dBu=0.775Vrms, 0dBV=1V, 0dB SPL=2x10-5 Pa
42 x 42 x 102 mm (1 11/16 x 1 11/16 x
4 1/8 inches) (W x H x D)
Approx. 197 g (6.9 oz) (including
batteries)
UWP-D Series
Compatibility with UWP Series / WL-800 Series
DSP enables a digital compander to match Sony’s analog wireless system. The UWPD transmitter can be used with a UWP Series or WL-800 Series receiver, and a UWP
Series or WL-800 Series transmitter can be used with a UWP-D receiver
Transmitter
UWP-D
UWP
UWP-D
WL800
UWP-D
Receiver
UWP-D
UWP-D
UWP
UWP-D
WL800
COMPANDER MODE
UWP-D
UWP
UWP
WL800
WL800
UWP-D: High speech quality mode supported incombination with UWP-D series devices.
UWP: Mode supported in combination with Sony UWPseries transmitters.
WL800: Mode supported in combination with Sony 800-series transmitters.
DWA-01D
Digital wireless adapter
• For use with DWR-S01D or DWR-S02D receiver
• Stand-alone wireless receiver operation
• Wide array of interfaces including two-channel
AES3 digital or analogue output
• Unique lock-together mechanism to allow two
DWA-01D adaptors to be easily combined
• Supports V-mount attachment
• Hirose 4-pin DC powering
BTA-801
Portable Tuner Mount Adapter
• Allows a WRR-855S portable
tuner to be mounted on a Sony
professional camcorder
• External DC power input via
the supplied 4-pin cable
WRR-855S
UHF Synthesized Diversity Tuner
• Space Diversity Tuner for camcorder use
• Easily mounts onto Sony HDCAM™/XDCAM™ HD422/Digital
Betacam™/XDCAM SD/ MPEG IMX™ camcorders without
need for audio/power cables or a mounting adapter
• Compact and lightweight design: 280 g (11 oz)
• A D-sub 15-pin connector for audio output to a Sony
professional camcorder and for receiving its power supply
from the camcorder
• A LCD provides various information such as RF input level
and audio output status
DWA-F01D
Digital wireless adapter
• For use with DWR-S01D or DWR-S02D receiver
• Stand-alone wireless receiver operation
• Top-panel operation for mixer bag
• Three-way powering (Hirose 4-pin DC powering,
DC In and NP-Batteries)
• Three-parallel audio output, including XLR
analogue output, BNC AES/EBU digital output
and mini-phone analogue output
Accessories
LCS-F01D
Soft Carrying Case
UWP-D Series
Specifications
WRR-855S UHF Synthesized Diversity Tuner
Receiving channels
1 channel
De-emphasis
566 MHz to 590 MHz (U30/32)
638 MHz to 662 MHz (U42/44)
606 MHz to 630 MHz (CE38)
758 MHz to 782 MHz(CN)
782 MHz to 806MHz (U6668)
806 MHz to 810MHz (JB)
925 MHz to 932MHz(KR)
1st: PLL synthesizer
2nd: PLL synthesizer
50 μs
Reference deviation
±5 kHz deviation at 1 kHz modulation (Maximum deviation: ±40 kHz deviation at 1 kHz modulation)
Selectivity
60 dB or more at ±250 kHz
Spurious rejection
80 dB or more
Frequency range
40 Hz to 18 kHz (typical)
Signal-to-noise ratio
60 dB or more at 60 dBμ RF input at reference deviation, A-weighted
RF muting (squelch) level
10 dBμ or OFF
Audio output level
-40 dBu at reference deviation
Audio output connector
D-sub 15-pin (1), unbalanced
Antenna connector
BNC-R type (2), 50 Ω (nominal)
Operating voltage
External: DC 7 V
Current (power) consumption
200 mA or less at external DC 7 V
Dimensions (W x H x D)
88.0 x 119.0 x 31.3 mm (3 1/2 x 4 3/4 x 1 1/4 inches)
Mass
Approx. 280 g (10.0 oz)
Supplied accessories
Antennas (1 pair), Operating instructions (1)
Receiving frequency range
Local oscillators
*The WRR-855S receives power from a camcorder via the D-sub 15-pin connector.
**0dBμV= 1μV EMF, 0dBu=0.775Vrms, 0dBV=1V, 0dB SPL=2x10-5 Pa
UWP Series
Products UWP-X Series
UTX-B2
UWP-X7
Belt-pack transmitter
Fixed all-metal belt-pack UHF wireless
microphone package
• UTX-B2 belt-pack transmitter
• URX-M2 tuner module
• Supplied accessories: Lavalier microphone (x1),
windscreen (x1), microphone holder clip (x1), belt clip (x1)
• Extremely compact, lightweight and robust metal body
• Switchable MIC/LINE input level and adjustable
attenuator (0 to 21dB, 3dB steps)
• Supplied with omni-directional Lavalier microphone
• UWP is available in CH33, CH38, CH42 and CH51 with
24MHz Bandwidth*
• Output power is 5/30mW
URX-M2
UTX-M03
• Installed in the MB-X6 tuner unit or
the SRP-X500P all-in-one type presentation mixer/amplifier
• Can use up to six receivers in MB-X6 mainframe
• UWP is available in CH33, CH38, CH42 and CH51 with
24MHz Bandwidth*
・ Sony’s Digital Audio Processing
・ Incorporates an all-metal, robust, uni-directional dynamic
・ microphone capsule with minimized popping and wind
noise
・ Compatibility with UWP Series / WL-800 Series
・ USB for charging batteries
・ Interchangeable microphone capsule
Handheld Wireless Microphone
Tuner module
MB-X6
Tuner Base Unit
SRP-X500P
Digital Powered Mixer
Front Panel: MB-X6 with six WRU-806A/806B tuner units installed
SRP-X500P with two URX-M2 tuner modules installed
Rear Panel
• Accommodates up to six WRU-806A/806B for up to six channels of simultaneous operation
• Addition of the WD-850 allows multi-channel operation with even more channels
• Easy mechanism for attaching and detaching tuner modules
• RF input attenuator switch (10 dB/0 dB)
• Balanced XLR output connector for each tuner and mix output
• Selectable output level: -58 dBu (for MIC) or -20 dBu (for LINE) at ±5 kHz deviation at 1 kHz
modulation
• Auto channel search function automatically selects unoccupied channels
• Supplied with passive antennas
• Modular, 1U high, 19-inch rack unit
SRP-X700P
Digital Powered Mixer
SRP-X700P with two URX-M2 tuner modules installed
UWP Series
Accessories UWP-X Series
AD-RX7B
Windscreen Pack (5PCS)
ECM-LZ1UBMP
BATC-2AA
SAD-HV1B
Battery Case
Holder Clip Pack (4PCS)
ECM-322BMP
Uni-directional
Lavalier Microphone
ECM-HZ1UBMP
Omni-directional
Headset Microphone
Uni-directional
Headset Microphone
SAD-M01
ECM-X7BMP
AN-820
AN-57
Lavalier Microphone
Microphone Holder
UHF Antenna
ECM-166BMP
Uni-directional
Lavalier Microphone
UHF ground
plane antenna
Frequencies
Frequencies UWP-X Series
UC
Operating
566 MHz to 590 MHz 566 MHz to 590 MHz 606 MHz to 630 MHz 638 MHz to 662 MHz 638 MHz to 662 MHz 758 MHz to 782 MHz 794 MHz to 806 MHz 806 MHz to 810MHz 925 MHz to 932MHz
Frequencies
UC3032
UC4244
version
188
188
Selectable
( in 125kHz steps)
( in 125kHz steps)
Frequencies
version
CE33
CE38
CE42
CE
Selectable
Frequencies
189
( in 125kHz steps)
189
( in 125kHz steps)
189
( in 125kHz steps)
version
CN
CN
Selectable
Frequencies
188
( in 125kHz steps)
E
J
KR
version
Selectable
Frequencies
version
Selectable
Frequencies
version
Selectable
Frequencies
E
94
( in 125kHz steps)
JB
30
( in 125kHz steps)
KR
55
( in 125kHz steps)
UWP Series
Specifications
UTX-B2X Bodypack Transmitter
Oscillator
Type of emission
Carrier frequencies
U3032
U4244
CE33
566 MHz to 590 MHz, selectable from 189 frequencies (in 125-kHz steps) / 960 frequencies (in 25-kHz
CE38
606 MHz to 630 MHz, selectable from 189 frequencies (in 125-kHz steps) / 960 frequencies (in 25-kHz
CE42
638 MHz to 662 MHz, selectable from 189 frequencies (in 125-kHz steps) / 960 frequencies (in 25-kHz
CN
E
J
KR
RF power output
Antenna
Pilot tone signal
RF squelch level
Frequency response
758 MHz to 782 MHz, selectable from 188 frequencies (in 125-kHz steps)
794 MHz to 806 MHz, selectable from 94 frequencies (in 125-kHz steps)
806 MHz to 810MHz, selectable from 30 frequencies (in 125-kHz steps)
925 MHz to 932MHz, selectable from 55 frequencies (in 125-kHz steps)
30mW/5mW selectable (U,CE7,CN models)
10mW/2mW selectable (E, J, KR3 model)
1/4 wave length wire
32 kHz
25 dBμ
40 Hz to 18 kHz (typical) (U,CE7,CN,E,KR)
40 Hz to 18 kHz (typical) (U,CE7,CN,E,KR)
50 Hz to 15 kHz (typical) (J)
50 Hz to 15 kHz (typical) (J)
Reference deviation
±7 kHz (-60 dBV, 1-kHz input) (U,CE7,CN,E,KR)
±5 kHz (-66 dBV, 1-kHz input) (J)
±5 kHz (at 1-kHz modulation)
Signal-to-noise ratio
60 dB or more (±7-kHz deviation at 1-kHz modulation, A-
60 dB or more (±5-kHz deviation at 1-kHz
modulation, A-weighted)
Electret condenser, omni-directional (UTX-B2V)
Microphone capsule
Audio attenuator adjustment
range
Audio input level
Audio connector
Indicators
LCD
LED
Power requirements
Battery life
Dimensions
(W x H x D)
Electret condenser, uni-directional (UTX-B2X)
0 dB to 21 dB (in 3-dB steps): Mic input
MIC: -60 dBV (at 0-dB attenuator level)
LINE: +4 dBu
Input: 3-pole mini jack
566 MHz to 862 MHz
Audio output
level
-20 dBu* (LINE)/-58 dBu*
(MIC) at reference deviation
Audio output
connector
XLR-3-32 (7), balanced
Antenna
attenuator level
0 dB or 10 dB
Antenna
connector
Inputs: BNC-R type (2), 50 Ω
(nominal)
Operating
voltage
AC 120 V, 60 Hz (USA-type)
AC 230 V, 50/60 Hz (AU-type)
Current (power)
consumption
30 W when accommodating six
WRU-806A/806B tuner modules
Mass
Approx. 5.5 kg (12 lb 2 oz)
-
Supplied
accessories
Output: 3-pole mini jack, unbalanced
Audio input status
RF input status
DC 9.0 V
excluding the antennas
Mass
Approx. 145 g (5.1 oz), including batteries
*0dBμV= 1μV EMF, 0dBu=0.775Vrms, 0dBV=1V, 0dB SPL=2x10-5 Pa
Receiving
frequency
range
-
DC 3.0 V (with two AA-size alkaline (LR6) batteries)
63 × 82.5 × 18.7 mm (2 1/2 × 3 1/4 × 3/4 inches)
6 channels when accommodating
6 URX-M2 tuner modules
482 x 44 x 285 mm
(19 x 1 3/4 x 11 1/4 inches)
Operating channel number/frequency, audio
status, RF input level
Approx. ten hours with Sony's AA-size alkaline (LR6)
25°C(77°F) at 10-mW output (E model)
Receiving
channels
Dimensions
(W x H x D)
Operating channel number/frequency, attenuator level, RF
level (High/Low), audio input status, transmitter battery
accumulated operating time
Approx. eight hours with Sony's AA-size alkaline (LR6)
25°C(77°F) at 30-mW output (except E model)
MB-X6 Tuner Base Unit
URX-M2 Tuner Module
Crystal-controlled PLL Synthesizer
Crystal-controlled PLL Synthesizer
F3E
Space diversity
566 MHz to 590 MHz, selectable from 188 frequencies (in 125-kHz steps)
638 MHz to 662 MHz, selectable from 188 frequencies (in 125-kHz steps)
-
57 x 26 x 121 mm (2 1/4 x 1 1/16 x 4 7/8
Approx. 150 g (5.3 oz)
AC power cord (1), Antennas (1
pair), Operating instructions (1)
Digital wireless audio
packages using 2.4GHz
ISM band, for musicians
and presenters
High quality digital sound
and reliable RF transmission
providing superior
performance from Sony.
DWZ
Epic digital wireless
technology, amazingly
affordable
The DWZ-M50 mic is heavy enough to feel like a quality
built piece of kit, but without being so heavy it would
make your arm ache. The weight has also been nicely
balanced and the whole unit sits well in the hand.
My opinion of Sony has actually been turned around
by this product. It is a very impressive and adaptable
system which I would definitely recommend.
Ashley Riggs, Pro Mobile, Issue 59
DWZ Series
Great Performances for Presenters and Vocalists
Experience stable and reliable sound from Sony. With 24-bit linear PCM digital transmission, you get high sound
quality with high reliability, utilizing unique transmission technology also developed by Sony. With the support of
two RF modes, your audio signal can be captured and transmitted reliably and easily.
DWZ-M70
DWZ-B70HL
DWZ-M50
DWZ-B50GB
DWZ-B50I
DWZ-B30GB
DWZ Series
Technologies
Intelligent Feedback Reducer
The Sony Intelligent Feedback Reducer can suppress unwanted feedback
(howling) with high-performance DSP and Sony’s unique algorithms designed
to eliminate eedback before it becomes unbearable. Also, the equivalent of
maximum 1024-band suppression fi lters are continuously tuned automatically
in real time, eliminating feedback and avoiding deteriorating the original
signal; this delivers the highest quality sound that can be enjoyed by
presenters, vocalists, and audiences. You can freely select the audio outputs
to which you want this feedback reduction filter to apply – for example, you
can output original audio to the main PA system, while processed audio is
delivered to your monitor speakers.
Superb Digital Sound Quality
High-quality 24-bit linear PCM digital transmission
offers a pristine audio experience, and a wide
frequency range of 10 Hz to 22 kHz. With these
high-quality digital sound packages, you can
experience professional performances by
presenters and vocalists. The audio performance
degradation that’s typical with conventional
analog wireless systems is avoided, because
these digital wireless packages are designed
without the need for a compander.
DWZ Series
Technologies
Two RF Modes for Reliable Transmission
The DWZ-M70 package and WZ-B70HL package provide two selectable RF odes.
Simply choose the one that makes best use of your actual 2.4-GHz RF environment.
[ Wide Band Hopping Mode ]
[ Narrow Band Hopping Mode ]
This mode reduces interference with other wireless equipment
used in the same environment, such as wi-fi devices. It doesn’t
require you to have technical knowledge about radio
frequencies.
Wide Band Hopping
Mode also supports
additional error
correction for more
secure transmission*.
This mode helps you to avoid interference from other devices
– for example, 2.4-GHz wireless remote controllers that are
commonly used for lighting control. This enables you to
coordinate
frequencies when
using multiple
wireless systems
simultaneously**.
* Latency of approximately 5 ms.
Battery Recharging System
The BC-DWZ1 optional battery charger enables you to recharge
NiHM batteries in the ZTX-M02RC and the ZTX-B02RC. The BC-DWZ1 is
a contactless recharger; this means that you simply place the
handheld microphone and/or bodypack transmitter into the
charging station to recharge NiMH-type batteries. You do not need
to physically remove the rechargeable batteries to recharge them,
which saves you time and reduces wear and tear to the transmitters.
*BC-DWZ1 and NiMH battery are sold separately.
** Latency of approximately 3 ms.
DWZ Series
Package Lineup
DWZ-B70HL
Digital wireless Lavalier microphone
set for presenters and vocalists
ZRX-HR70
Half-rack receiver
ZTX-B02RC
Belt-pack transmitter
ECM-HZ1UBMP
Headset microphone
Microphone
holder clip
ECM-LZ1UBMP
Lavalier microphone
Antenna
Cord Clip
Belt Clip
AC adaptor
DWZ-M70
Digital wireless set for
presenters and vocalists
ZRX-HR70
Half-rack receiver
Microphone holder
Antenna
AC adaptor
Microphone holder
Antenna
AC adaptor
ZTX-M02RC
Handheld microphone
DWZ-M50
Digital wireless vocal set optimised for
musicians and bands
ZRX-HR50
Half-rack receiver
(DIGITAL WIRELESS RECEIVER)
ZTX-M01
Handheld microphone
(DIGITAL WIRELESS RECEIVER)
DWZ Series
Package Lineup
DWZ-B50GB
Digital wireless guitar
GC-0.7BMP
Guitar cable
ZRX-HR70
Half-rack receiver
(DIGITAL WIRELESS RECEIVER)
Antenna
Belt Clip
AC adaptor
Antenna
Belt Clip
AC adaptor
Belt Clip
Belt Clip
AC adaptor
ZTX-B01
Bodypack transmitter
(DIGITAL WIRELESS
RECEIVER)
DWZ-B50I
Digital wireless instrument set
ECM-GZ1UBMP
Gooseneck microphone
ZRX-HR50
Half-rack receiver
(DIGITAL WIRELESS RECEIVER)
ZTX-B01
Bodypack transmitter
(DIGITAL WIRELESS
TRANSMITTER)
DWZ-B30GB
Digital wireless set for
guitar and bass
GC-0.7BMP
Guitar cable
ZRX-C30
Compact receiver
ZTX-B01
Bodypack transmitter
(DIGITAL WIRELESS
RECEIVER)
DWZ Series
Products
ZRX-HR50
ZRX-HR70
digital wireless half-rack receiver
digital wireless half-rack receiver
• Intelligent Feedback reducer function
• 3-way parallel audio output .” TS phone (x2), Balanced XLR (x1)
• 5-Band graphic digital equalizer
• Colour LCD for simple operation and status monitoring for TX & RX
• Clear channel scan for easy set up
• Rack mountable 1U half-rack size (with optional RMM-HRD1 rack mount kit)
• Detachable whip antenna
• 3-way parallel audio output .” TS phone (x2), Balanced XLR (x1)
• 5-Band graphic digital equalizer
• Colour LCD for simple operation and status monitoring for TX & RX
• Clear channel scan for easy set up
• Rack-mountable 1U half-rack size (with optional RMM-HRD1
rack mount kit)
• Detachable whip antenna
ZRX-C30
digital wireless compact receiver
• Light and compact design
• Built-in antenna to protect against rough handling conditions
• 3-way parallel audio output .” TS phone (x2), Balanced XLR (x1)
• 3-way flexible powering: DC 12V / DC 9V / 9V 6LR61 battery
• Cable tone control
• LED Indicators for status monitoring for TX & RX
DWZ Series
Products
ZTX-M01
digital wireless handheld
microphone
• Sony’s original high-quality cardioid dynamic
capsule
• Interchangeable capsule design, with a
flexible choice of capsules, including CU-C31,
CU-F31 and CU-F32
• Momentary switch for muting or talk-back
application
• Lock function protects from inadvertent
setting changes
• Two AA battery operation
• Robust metal body
ZTX-B01
digital wireless belt-pack
transmitter
• Muting function for tuning
• Lock function protects from
inadvertent setting changes
• Two AA battery operation
• Robust metal body
ZTX-M02RC
Digital wireless handheld microphone
• AES 128-bit Encryption function
• Sony’s original high-quality cardioid dynamic capsule
• Interchangeable capsule design, with a flexible choice
of capsules
• Latch switch for power on/off for conventional
operation
• Two AA battery operation with contactless
rechargeable function (with optional BC-DWZ1 battery
charger)
• Robust metal body
ZTX-B02RC
Belt-pack transmitter
• AES 128-bit Encryption function
• Both cardioid condenser headset microphone
and cardioid condenser Lavalier microphone
are included
• Momentary switch for muting or talk-back
application
• Two AA battery operation with contactless
rechargeable function (with optional BC-DWZ1
battery charger)
• Robust metal body
DWZ Series
Accessories
GC-0.7BMP
Guitar cable
ECM-GZ1UBMP AD-RX7B
Gooseneck
microphone
Windscreen pack
RMM-HRD1*1
BC-DWZ1
Rack mount kit
Battery charger
ECM-HZ1UBMP
Headset
microphone
ECM-LZ1UBMP
Lavalier
microphone
SAD-HZ1B
Microphone
holder clip
EC-1.5BX XLR
Input cable
CU-C31
CU-F31
CU-F32
• Condenser type
• Cardioid
• 60 Hz - 20 kHz
• Dynamic type
• Super cardioid
• 60 Hz - 18 kHz
• Dynamic type
• Wide cardioid
• 70 Hz - 18 kHz
Capsule Unit
Capsule Unit
Capsule Unit
*1 For single/double use
Specifications
Directivity Characteristics (1 kHz)
ECM-GZ1UBMP
Frequency Response Characteristics
ZTX-M01
Directivity Characteristics (1 kHz)
Frequency Response Characteristics
On axis
90°
180°
ECM-HZ1UBMP
400Hz
1000Hz
2000Hz
4000Hz
Directivity Characteristics
Frequency Response
On axis
90°
180°
ZTX-M02RC
400Hz
1000Hz
4000Hz
8000Hz
Directivity Characteristics
Frequency Response
On axis
90°
180°
ECM-LZ1UBMP
90°
180°
400Hz
1000Hz
4000Hz
1000Hz
4000Hz
8000Hz
Directivity Characteristics
Frequency Response
On axis
400Hz
8000Hz
On axis
90°
180°
400Hz
1000Hz
4000Hz
8000Hz
DWZ Series
Specifications
Transmitting
Section
Receiving
Section
DWZ-M70
DWZ-B70HL
DWZ-M50
Transmitter Type
Carrier Frequencies
RF Power Output
Receiver Type
Reception Type
Antenna Type
Receiving Frequencies
RF Sensitivity
Handheld
Bodypack
2402.0 MHz to 2478.5 MHz
10 mW (e.i.r.p.)
rack-mount (Half / 1 channel)
Space diversity
External whip antenna
2402.0 MHz to 2478.5 MHz
24 dBμV or less
Handheld
Capsule Type
Directivity
Dynamic
Electret condenser
Uni-directional
MIC: -22 dBu
Dynamic
Maximum Input Level
142 dBSPL (with 12 dB attenuator)
Audio Attenuator Adjustment Range
Frequency Response
Audio Section
Audio Delay
0 / 6 / 12 dB
0 / 10 / 20 dB
0 / 6 / 12 dB
Transmission: 10 Hz to 22 kHz
Transmission: 10 Hz to 22 kHz
Headset Microphone: 60 Hz to 18 kH
Microphone unit: 70 Hz to 18 kHz
102 dB (A-weighted)
Narrow band mode: Approx. 3 ms / Wide band mode: Approx.
5 ms (Transmitter + Receiver)
Reference output level
Encryption
Display
XLR-3-32, balanced (x1), Phone jack, unbalanced (x2)
(Intelligent Feedback Reducer is available)
(Intelligent Feedback Reducer is available)
Balanced Output : MIC: -58 dBu / LINE: -12 dBu
Balanced Output : MIC: -58 dBu / LINE: -12 dBu
Balanced Output MIC: -58 dBu / LINE: -12 dBu
Unbalanced Output: -28 dBu
Unbalanced Output: -28 dBu
Unbalanced Output: -28 dBu
ASE 128-bit
ASE 128-bit
LCD
-
XLR-3-32, balanced (x1) / Phone jack, unbalanced (x2)
TX x1 / RX x 1
ZTX-M02RC: 3.0 V DC (two LR6 (size AA) alkaline dry cell
batteries)
ZTX-B02RC: 3.0 V DC (two LR6 (size AA) alkaline dry cell batteries)
(Rechargeable function is available with two HR6 (size AA) NiMH rechargeable batteries)
(Rechargeable function is available with two HR6 (size AA) Ni-MH
rechargeable batteries)
ZRX-HR70: External DC input: 12 V DC
ZRX-HR70: External DC input: 12 V DC
ZRX-HR50: DC 12 V
Approx. 10 hours of continuous use (25 °C (77 °F) ambient temperature,
Sony LR6 (size AA) alkaline dry cell batteries)
Approx. 10 hours of continuous use (25 °C (77 °F) ambient
temperature, Sony LR6 (size AA) alkaline dry cell batteries)
Sony LR6 (size AA) alkaline dry cell batteries)
Approx. 10 hours of continuous use (25 °C (77 °F) ambient
temperature, Sony LR6 (size AA) alkaline dry cell batteries)
Operating Temperature
Storage/Transport Temperature
ZTX-M02RC: φ 48 × 258 mm (1 15/16 × 10 1/4 inches)
(diameter/length)
ZRX-HR70: 168 × 44 × 96 mm (6 5/8 × 1 3/4 ×3 7/8 inches)
(w/h/d)
Dimensions
Mass
Supplied Accessories
Narrow band mode: Approx. 3 ms / Wide band mode:
Approx. 5 ms (Transmitter + Receiver)
XLR-3-32, balanced (x1), Phone jack, unbalanced (x2)
USB Port(for firmware update)
Battery Operating Time
General
102 dB (A-weighted)
0.03% or less (-38 dBu, 1 kHz input)
Analog Output
Power Requirements
Lavalier Microphone: 60 Hz to 18 kHz
MIC: 102 dB (A-weighted)
INST/LINE: 98 dB (A-weighted)
Narrow band mode: Approx. 3 ms / Wide band mode: Approx. 5 ms
(Transmitter + Receiver)
(Additional Audio Delay for Intelligent Feedback Reducer/Low: (Additional Audio Delay for Intelligent Feedback Reducer/Low: 0ms, Mid:
0ms, Mid: 8ms, High: 16ms)
8ms, High: 16ms)
Distortion (T.H.D)
Other
Equipment
142 dB SPL (with 12 dB attenuator)
Transmission: 10 Hz to 22 kHz
Microphone unit: 70 Hz to 16 kHz
Dynamic Range
INST/LINE: +8 dBu (when attenuator level is 0 dB)
ZRX-HR70: 168 × 44 × 96 mm (6 5/8 × 1 3/4 ×3 7/8 inches) (w/h/d)
ZTX-M02RC: Approx. 308 g (11 oz.) (including batteries)
ZTX-B02RC: Approx. 162 g (5.7 oz.) (including batteries)
ZRX-HR70: Approx. 510 g (1 lb. 2.0 oz.)
ZRX-HR70: Approx. 510 g (1 lb. 2.0 oz.)
ZTX-M02RC(1), ZRX-HR70(1), Mic holder (1), Antenna (2), AC
adapter (1), Quick Start Guide (1), Before Use (1), CD-ROM (1)
*0dBμV= 1μV EMF, 0dBu=0.775Vrms, 0dBV=1V, 0dB SPL=2x10-5 Pa
0°C to 50°C / 32°F to 122°F
-20°C to +60°C (-4°F to +140°F)
ZTX-B02RC: 63 × 87 × 20 mm (2 1/2 × 3 1/2 × 13/16 inches) (w/h/d)
(excluding the antenna)
ZTX-B02RC(1), ZRX-HR70(1), Uni-directional Lavalier Microphone (1),
Uni-directional Headset microphone (1), Mic holder clip (1), Cord clip (1),
Wind screen (1), Belt clip (1), Belt clip screw (1), Antenna (2), AC adapter
(1), Quick Start Guide (1), Before Use (1), CD-ROM (1)
ZTX-M01: DC 3.0 V (two LR6 (size AA) alkaline dry cell
batteries)
ZTX-M01: 48 × 258 mm (1 15/16 × 10 1/4 inches)
(diameter/length)
ZRX-HR50: 168 × 44 × 96 mm (6 5/8 × 1 3/4 ×3 7/8
inches) (w/h/d)
ZTX-M01: 305 g (11 oz) (including batteries)
ZRX-HR50: 510 g (1 lb 2 oz)
Microphone holder (1), Antenna (2), AC adaptor (1), Quick
Start Guide (1), CD-ROM (1)
DWZ Series
Specifications
DWZ-B30GB
Transmitting Section
Receiving Section
Transmitter Type
Carrier Frequencies
RF Power Output
Receiver Type
Reception Type
Antenna Type
Receiving Frequencies
RF Sensitivity
Capsule Type
Directivity
Maximum Input Level
DWZ-B50GB
Bodypack
2,402.0 MHz to 2,478.5 MHz
10 mW (e.i.r.p.)
Rack-mount (Half / 1 channel)
Space diversity
External whip antenna
2,402.0 MHz to 2,478.5 MHz
24 dB V or less
Compact (1 channel)
Internal monopole antenna
30 dB V or less
MIC: -22 dBu / INST: +8 dBu
Audio Attenuator Adjustment Range
Audio Section
Condenser
Uni-directional
(with 0 dB attenuator)
0 / 10 / 20 dB
Frequency Response
Transmission: 10 Hz to 22
kHz/Gooseneck Microphone: 20 Hz to 22
kHz
10 Hz to 22 kHz
Dynamic Range
Audio Delay
Distortion (T.H.D)
Analog Output
MIC: 102 dB (A-weighted) / INST: 98 dB (A-weighted)
Narrow band mode: Approx. 3 ms / Wide band mode: Approx. 5 ms (Transmitter + Receiver)
0.03% or less (-38 dBu, 1 kHz input)
XLR-3-32, balanced (x1) / Phone jack, unbalanced (x2)
-Balanced Output: -20 dBu
-Balanced Output MIC: -58 dBu / LINE: -12 dBu
-Main/Tuner Out: -28 dBu
-Unbalanced Output: -28 dBu
LCD
Reference Output Level
Other Equipment
DWZ-B50I
Encryption
Display
USB Port(for firmware update)
TX x1 / RX x 1
TX x1 / RX x 1
TX x1 / RX x 1
ZTX-B01: DC 3.0 V (two LR6 (size AA) alkaline dry cell batteries)
Power Requirements
Battery Operating Time
ZRX-C30: DC 12 V / 9 V / Square 9 V 6LR61battery
ZRX-HR50: DC 12 V
ZTX-B01: Approx. 10 hours of continuous use (25 °C (77
°F) ambient temperature, Sony LR6 (sizeAA) alkaline dry
cell batteries)
Approx. 10 hours of continuous use (25 °C (77 °F) ambient temperature, Sony LR6
(size AA) alkaline dry cell batteries)
Operating Temperature
General
ZTX-B01: 63 × 80 × 20 mm (2 1/2 × 3 1/4 × 13/16 inches) (W/H/D) (excluding the antenna)
ZTX-B01: 156 g (5.5 oz) (including batteries)
Dimensions
Mass
Supplied Accessories
0°C to 50°C (32°F to 122°F)
-20°C to +60°C (-4°F to +140°F)
Storage/Transport Temperature
ZRX-C30: 205 g (7.2 oz) (including battery)
ZRX-HR50: 510 g (1 lb 2 oz)
Guitar cable (1), Belt clip (1), Belt clip screw (1), Cable Guitar cable (1), Belt clip (1), Belt clip screw Uni-directional Gooseneck Microphone
clamp (1), AC adaptor (1), Quick Start Guide (1),CD-ROM (1),Antenna (2), AC adaptor (1),Quick Start (1), Wind screen (1), Belt clip (1), Belt clip
(1)
Guide (1),CD-ROM (1)
screw (1), Antenna (2), AC adaptor (1),
Quick Start Guide (1), CD-ROM (1)
*0dBμV= 1μV EMF, 0dBu=0.775Vrms, 0dBV=1V, 0dB SPL=2x10-5 Pa
ECM
Delivering excellent sound
and noise handling
performance
Comprehensive choice of high sensitivity
shotgun Electret condenser-type microphones
Recording engineers the world over are immensely
protective of their own personal collection of microphones,
regarding them as an essential part of their sonic signature.
Building on decades of experience in audio acquisition,
Sony offers a comprehensive choice of wired shotgun
microphones that offers musicians, broadcasters and
producers of audio-visual presentations uncompromised
audio, as well as utterly dependable performance.
ECM Series
Shotgun microphone
When You Need Superior Quality and Excellent
Versatility in the Most Demanding Sound
Gathering Applications
Since Sony introduced the ECM-678 Electret
Condenser Shotgun Microphone in 2003, the shotgun
microphone family having already been well-accepted
for field production and broadcast studio applications.
Sony’s expertise and knowledge, accumulated over
decades as a world-leading supplier of broadcast
equipment, are consolidated in these compact,
lightweight microphones.
Despite their slim body, Sony’s shotgun microphones
offer excellent sensitivity, low inherent noise, flat-andwide frequency response, superb sound quality, and
extreme durability.
These microphones are optimally designed for use
with Sony’s professional camcorders, which are
globally playing active roles in video acquisition with
their excellent video quality.
As well as operating with camcorders, Sony’s shotgun
microphones are also suitable in other soundgathering configurations; they can be used, for
example, as boom microphones.
The versatile shotgun microphone family from Sony
provides the ideal choice for virtually all qualityconscious sound gathering applications requiring
extremely smooth and natural sound reproduction.
ECM-680S
MS stereo shotgun
Electret condenser microphone
• Superb sensitivity of -28dB*2 (stereo)/- 32dB*2 (monaural)
and extremely low inherent noise of less than 20dB SPL (stereo/monaural).
• Flat-and-wide frequency response: 50Hz
to 20kHz (stereo), 40Hz to 20kHz (monaural)
• Built-in low-cut filter
• Compact and lightweight design
ECM-680S Stereo
ECM-680S Monoral
ECM Series
Shotgun microphone
ECM-678
ECM-674
ECM-673
ECM-VG1
Shotgun Electret condenser
microphone
Affordable shotgun Electret
condenser microphone
Shotgun Electret
condenser microphone
Shotgun Electret
condenser microphone
• Superb sensitivity of -28dB
(0dB=1 V/Pa.) and an extremely low
inherent noise of
less than 16dB SPL
• Flat-and-wide frequency response
(40Hz to 20kHz)
• Compact design
• High-durability and reliability
• Built-in low-cut filter
• Excellent sensitivity of -36dB
(0dB=1 V/Pa.) and low inherent noise level
of less than 17dB SPL
• Flat-and-wide frequency response
(40Hz to 20kHz)
• Compact and lightweight design
• Two-way powering
(48V Phantom Power and 1,5V AA battery)
• Built-in low-cut filter
• Built-in battery liquid leakage protection
circuit
• Excellent sensitivity of -36dB
(0dB=1 V/Pa.) and a low inherent
noise level of less than 17dB SPL
• Flat-and-wide frequency response
(40Hz to 20kHz)
• Compact and lightweight design
• High-durability and reliability
• Built-in low-cut filter
• Excellent sensitivity of -33 dB
(0 dB=1 V/Pa), and a low inherent noise
level of less than 18 dB SPL
• Flat-and-wide frequency response
(40 Hz to 20 kHz), excellent sensitivity
of -33 dB (0 dB=1 V/Pa), and a low
inherent noise level of less than 18 dB SPL
• Compact and extremely lightweight
design with metal body
• Built-in low-cut filter
• External DC (40 to 52 V) operation
• Newly Developed windscreen
Directivity Characteristics
Frequency Response Characteristics
Directivity Characteristics
Frequency Response Characteristics
Directivity Characteristics
Frequency Response Characteristics
Directivity Characteristics
Frequency Response Characteristics
ECM Series
Shotgun microphone
ECM-MS2
EMC-CG50BP
Compact MS stereo back
Electret condenser shotgun microphone
UHF ground plane antenna
• Compact lightweight design ideal for use with handheld camcorders
• Stereo and mono operation
• Professional quality sound reproduction
• Metal body reduces external noise
• External DC (40 to 52 V) operation
• Original windscreen protects from contact noise
• Cable tie for bundling and fastening the microphone cable
ECM-MS2 Stereo
• Light wight Shotgun Microphone with
Ø 3.5 gold coating L type stereo mini plug
for small camcorders or DSLR camera.
• Built-in Low-cut Filter
• Power Supplied by Camera or Alkaline
AA Battery
• Original windscreen protect from contact
noise
Accessories
ECM-MS2 Monoral
EC-0.5X3F5M
XLR-3P - XLR-5P cable
EC-0.5X5F3M
XLR-5P - XLR-3P (2) cable
ECM Series
Specifications
ECM-680S
Mode
Stereo
Monaural
ECM-678
ECM-674
ECM-673
–
–
–
Capsule type
Electret condenser
Electret condenser
Electret condenser
Electret condenser
Stereo type
MS (Mid-Side) stereo microphone
–
–
–
Directivity
Uni-directional
Super-cardioid
Super-cardioid
Super-cardioid
Super-cardioid
Frequency response
50 Hz to 20 kHz
40 Hz to 20 kHz
40 Hz to 20 kHz
40 Hz to 20 kHz
40 Hz to 20 kHz
Sensitivity (at 1 kHz)
-28 dB*1 ±3 dB
-32 dB*1 ±3 dB
-28 dB*1 ±3 dB
-36 dB*1 ±3 dB
-36 dB*1 ±3 dB
200 Ω ±20%
220 Ω ±20%
220 Ω ±20%
Output impedance
(at 1 kHz)
100 Ω ±20%
Dynamic range
103 dB or more
104 dB or more
111 dB or more
Phantom: 107 dB or more,
Battery: 98 dB or more
107 dB or more
Signal-to-noise ratio (IEC179Aweighted,
1 kHz, 1Pa)
73 dB or more
74 dB or more
78 dB or more
77 dB or more
77 dB or more
Inherent noise
21 dB SPL*2 or less
20 dB SPL*2 or less
16 dB SPL*2 or less
17 dB SPL*2 or less
17 dB SPL*2 or less
Wind noise
55 dB SPL*2 or less
(with windscreen)
60 dB SPL*2 (without windscreen)
60 dB SPL*2 or less
(without windscreen)
45 dB SPL*2 or less (with windscreen),
50 dB SPL*2 (without windscreen)
45 dB SPL*2 or less (with windscreen),
50 dB SPL*2 (without windscreen)
Induction noise from
external magnetic field
0 dB SPL*2 or less
0 dB SPL*2 or less
0 dB SPL*2 or less
0 dB SPL*2 or less
Maximum input sound
pressure level
124 dB SPL*2
127 dB SPL*2
Phantom: 124 dB SPL*2,
Battery: 115 dB SPL*2
124 dB SPL*2
Power requirements
DC 40 to 52 V
DC 40 to 52 V
External: DC 40 to 52 V,
Battery: 1.5 V
DC 40 to 52 V
Dimensions
ø20 x 250 mm
(ø13/16 x 9 7/8 inches)
ø20 x 250 mm
(ø13/16 x 9 7/8 inches)
ø20 x 268 mm
(ø13/16 x 10 5/8 inches)
ø20 x 200 mm
(ø13/16 x 7 7/8 inches)
Mass
Approx. 105 g (3.7 oz)
200 g (7 oz)
Approx. 185 g (6.5 oz) without battery
Approx. 208 g (7.3 oz) with battery
Approx. 135 g (4.8 oz)
Supplied Accessories
Windscreen (x1),
Microphone holder (x1),
Microphone spacer (x2),
Microphone cable, XLR-5P - XLR-5P (x1),
Stand Adaptor (x2),
Carrying case (x1),
Operating instructions (x1)
Windscreen (x1),
Microphone holder (x1),
Microphone spacer (x2),
Microphone cable, XLR-3P - XLR-3P (x1),
Stand Adaptor (x2),
Carrying case (x1),
Operating instructions (x1)
Windscreen (x1),
Microphone holder (x1),
Microphone spacer (x2),
Microphone cable, XLR-3P - XLR-3P (x1),
Stand Adaptor (x2),
Operating instructions (x1)
Windscreen (x1),
Microphone holder (x1),
Microphone spacer (x2),
Microphone cable, XLR-3P - XLR-3P (x1),
Stand Adaptor (x2),
Operating instructions (x1)
ECM Series
Specifications
ECM-VG1
Mode
Capsule type
Stereo type
–
Mono Electret Condenser
–
Directivity
ECM-MS2
–
–
ECM-CG50BP
MS (Mid-Side) stereo microphone
Monaural
Electret condenser
–
Uni-directional (super-cardioid)
Uni-directional
Super-cardioid
Frequency response
40 Hz to 20 kHz
Stereo: 80 Hz to 20,000 Hz
Monaural: 70 Hz to 20,000 Hz
40 Hz to 20 kHz
Sensitivity (at 1 kHz)
-33 dB*1 ±3 dB
Stereo: -32 dB*1 1) Monaural: -36 dB 1)
Output impedance
(at 1 kHz)
60Ω±20%, Balanced
60Ω±20%, Balanced
-48 dB/Pa±4 dB
*Specially tuned to be used with the camcorders
AGC function
–
Output connector
-
Cannon XLR-3-12C type x2
Dynamic range
Signal-to-noise ratio
(IEC179A-weighted, 1 kHz,
1Pa)
Inherent noise
107 dB or more
100 dB or more
ø 3.5 gold coating L type stereo mini plug cable
length
Approx. 35 cm (13 7/8 in.)
80 dB or more
76 dB or more
69 dB or more
76 dB or more
18 dB SPL*2 or less
45 dB SPL*2 or less
(with windscreen)
25 dB SPL*2 or less 2)
45 dB SPL*2 or less
(with wind screen)
65 dB SPL or less
(without wind screen)
18 dB SPL*2 (Average)
Induction noise from
external magnetic field
0 dB SPL*2
0 dB SPL*2 /1 x 10-7 T (1 mG) or less
–
Maximum input sound
pressure level
125 dB SPL*2
125 dB SPL*2 or more (input level for 1% waveform
distortion at 1 kHz, converted into equivalent input
sound pressure level) 2)
100 dB SPL*2 or more
Power requirements
External, DC 40 V to 52 V
Wind noise
External power supply 40 V to 52 V
DC (IEC 61938 P48)
ø20 x 137 mm
–
Approx. 900 hours with one alkaline AA battery or
plug-in phantom power from audio jack of
compatible camcorder
Approx. ø 21 mm × 261 mm (Ø 27/32 in × 10 3/8
in.) (excluding cord)
Dimensions
ø20 x 210 mm (ø13/16 x 8 3/8 inches)
Mass
Approx. 66g (2.3 oz.)
Approx. 160g (5.6 oz.)
Approx. 85 g (3 oz.) (excluding battery)
Supplied Accessories
Windscreen (x1), Mic holder (1), Mic spacer (1),
Stand adaptor (2), Operating instructions (1)
Wind screen (1), Cable tie (1), Operating instructions
(1), Warranty booklet (1)
Shotgun microphone (1), Wind screen (1),
Microphone holder (1), Microphone spacer(1), Set
of printed documentation
*1 0 dB=1 V/Pa, 1 kHz
*2 0dB SPL=2×10-5 P
(ø20
31/32 x 5 1/2 inches)
ECM Series
Lavalier microphone
ECM-88 series
B
BC
BMP
BPT
ECM-77 series
FPT
B
BC
BMP
BPT
/9X
FPT
ECM-66 series
B
BC
BMP
BPT
/9X
FPT
ECM-55 series
B
BC
BMP
BPT
/9X
FPT
FEATURES
FEATURES
FEATURES
FEATURES
• Ultra-miniature, omni-directional
electret condenser microphone.
• Designed for quality-critical
applications in broadcasting,
theater, and field productions.
• Choice of model variations to
suit specific user requirements.
• Flat-and-wide frequency
response provides natural
sound reproduction.
• Water-resistant design
maintains sound clarity in
almost any application or environment.
• Dual-diaphragm mechanism
contributes to high sensitivity,
wide dynamic range, and low noise.
• Low cable-noise characteristics.
• Miniature design makes it easy
to conceal in a stage costume.
• Miniature, omni-directional
electret condenser microphone.
• Worldwide-acclaim for
performance and reliability in
studio, ENG, and EFP
applications.
• Choice of model variations to
suit specific user requirements.
• Wide frequency response, high
sensitivity, and low-noise
characteristics.
• Miniature design makes it easy
to conceal in a costume.
• Ideal for use with DWT-B01.
• Uni-directional, electret
condenser microphone.
• Resistant to howling by rejecting
indirect sound.
• Ideal for institutional use and
sound-contracting applications
such as speeches, lectures, and
conferences.
• Designed for a wide range of
applications from voice to
instrumental recording.
• Wide dynamic range (101 dB),
and high maximum input-soundpressure level (130 dB SPL).
• Low inherent-noise characteristics.
• Omni-directional, electret
condenser microphone.
• High signal-to-noise ratio and
low inherent-noise
characteristics.
• Large microphone head of 10.6
mm (7/16 inch) diameter offers
rich sound reproduction.
• Successor to the ECM-50
microphone, the world's first
electret condenser lavalier
microphone
Directivity Characteristics
Frequency Response Characteristics
Directivity Characteristics
Directivity Characteristics
Directivity Characteristics
Frequency Response Characteristics
Frequency Response Characteristics
Frequency Response Characteristics
ECM Series
Lavalier microphone
ECM-44 series
B
BC
BMP
BPT
/9X
FPT
ECM-V1BMP
ECM-166 series
B
BC
BMP
BPT
FPT
B
BC
BMP
ECM-X7BMP
BPT
FPT
FEATURES
FEATURES
FEATURES
• Omni-directional, electret
condenser microphone.
• Choice of model variations to
suit specific user requirements.
• Cost-effective miniature
microphone provides superb
sound quality.
• Uni-directional, electret
condenser microphone.
• Resistant to howling by rejecting
indirect sound.
• Reasonably priced lavalier
microphone, ideal for
institutional use and soundcontracting applications such
as speeches, lectures, and
conferences.
• The lavalier microphone
supplied with the UWP package
is available as an individual
microphone.
• Omni-directional, electret
condenser microphone.
• Reasonably priced lavalier
microphone, ideal for ENG and
EFP uses.
ECM-44B does not support
external DC operation.
Directivity Characteristics
Frequency Response Characteristics
B
BC
BMP
BPT
FPT
FEATURES
• The lavalier microphone
supplied with the UWP package
is available as an individual
microphone.
• Uni-directional, electret
condenser microphone.
• Resistant to howling by rejecting
indirect sound.
• Reasonably priced lavalier
microphone, ideal for
institutional use and soundcontracting applications such
as speeches, lectures, and
conferences.
Directivity Characteristics
Directivity Characteristics
Directivity Characteristics
Frequency Response Characteristics
Frequency Response Characteristics
Frequency Response Characteristics
ECM Series
Lavalier / Headset microphone
ECM-322 series
B
BC
BMP
BPT
ECM-LZ1UBMP
FPT
B
BC
BMP
BPT
ECM-HZ1UMBP
FPT
B
BC
BMP
BPT
ECM-GZ1IBMP
FPT
B
BC
BMP
BPT
FPT
FEATURES
FEATURES
FEATURES
FEATURES
• Omni-directional, electret
condenser microphone.
• Headset microphone, ideal for a
variety of multimedia
presentation applications
ranging from seminars and
conferences to lectures and
workshops.
• Ear-clip-style design, wearable
on either the left or right ear.
• The position of the microphone
is adjustable.
• With the adjustable soft-texture
ear hook and detachable
headband, the headset
microphone is comfortable to
wear and fits stably on the ear,
even during lengthy
presentations.
• The lavalier microphone
supplied with the UWP package
is available as an individual
microphone.
• Omni-directional, electret
condenser microphone.
• Reasonably priced lavalier
microphone, ideal for ENG and
EFP uses.
• The lavalier microphone
supplied with the UWP package
is available as an individual
microphone.
• Omni-directional, electret
condenser microphone.
• Reasonably priced lavalier
microphone, ideal for ENG and
EFP uses.
• The lavalier microphone
supplied with the UWP package
is available as an individual
microphone.
• Omni-directional, electret
condenser microphone.
• Reasonably priced lavalier
microphone, ideal for ENG and
EFP uses.
Directivity Characteristics
Frequency Response Characteristics
Directivity Characteristics
Directivity Characteristics
Directivity Characteristics
Frequency Response Characteristics
Frequency Response Characteristics
Frequency Response Characteristics
ECM Series
Specifications
ECM-88 Series
ECM-77 Series
XLR type
ECM-88B with supplied DC-78
ECM-77B
(Supplied with a battery unit and XLR-3-12C type connector.)
SMC type
ECM-88BC
ECM-77BC
(Supplied with a Sony 4-pin <SMC9-4P> connector.)
Model Variations
BMP type
—
ECM-77BMP
(Supplied with a 3.5 mm diameter, 3-pole mini plug.)
ECM-88BPT
Pigtail type
ECM-77BPT
(Supplied without a connector <pigtail>.)
ECM-88FPT
Capsule type
Electret Condenser
Electret Condenser
Frequency response
20 Hz to 20 kHz
40 Hz to 20 kHz
Directivity
Omni-directional
Omni-directional
*1
±
XLR type
−52.0 dB 2 dB
−52.0 dB ± 2 dB
Sensitivity (0 dB=1 V/Pa, at 1 kHz)
SMC/BMP/Pigtail type
−39.0 dB ± 2 dB
−39.0 dB ± 2 dB
XLR type
100 Ω ± 20% (balanced)*1
150 Ω ± 20% (balanced)
Output impedance at 1 kHz
SMC/BMP/Pigtail type
2.5 kΩ ± 30% (unbalanced)
2.5 kΩ ± 30% (unbalanced)
ECM-66 Series
ECM-55 Series
ECM-44 Series
ECM-166 Series
ECM-66B
ECM-55B
ECM-44B
—
ECM-66BC
—
ECM-44BC
ECM-166BC
—
—
ECM-44BMP
ECM-166BMP
—
—
ECM-44BPT
—
Electret Condenser
70 Hz to 14 kHz
Uni-directional
−50.0 dB ± 2 dB
−36.5 dB ± 2 dB
100 Ω ± 20% (balanced)
Electret Condenser
30 Hz to 18 kHz
Omni-directional
−52.0 dB ± 2 dB
—
100 Ω ± 20% (balanced)
Electret Condenser
40 Hz to 15 kHz
Omni-directional
−53.0 dB ± 3 dB
−40.0 dB ± 3 dB
250 Ω ± 20% (balanced)
Electret Condenser
100 Hz to 10 kHz
Uni-directional
—
−45.0 dB ± 3 dB
2.5 kΩ ± 30% (unbalanced)
—
—
2.5 kΩ ± 30% (unbalanced) 2.5 kΩ ± 30% (unbalanced)
Dynamic Range
Signal-to-noise ratio (A-weighted, 1 kHz, 1 Pa.)
Inherent noise (0dB SPL = 2E-5 Pa.)
99 dB or more
68 dB or more
26 dB SPL or less
90 dB or more
64 dB or more
30 dB SPL or less
101 dB or more
65 dB or more
29 dB SPL or less
98 dB or more
66 dB or more
28 dB SPL or less
90 dB or more
62 dB or more
32 dB SPL or less
96 dB or more
60 dB or more
34 dB SPL or less
Wind noise (with windscreen, at 2m/s) (0 dB SPL = 2E-5 Pa.)
45 dB SPL or less
40 dB SPL or less
50 dB SPL or less
40 dB SPL or less
40 dB SPL or less
—
Induction noise from external magnetic field (dB SPL/1E-7 T, 0 dB SPL = 2E-5 Pa.)
Maximum input sound pressure level (0 dB SPL = 2E-5 Pa.)
Battery
Power supply (XLR type only)
Battery life (LR6)
External power
XLR type
Power requirements
SMC/BMP/Pigtail type
XLR type (internal battery)
Current drain
XLR type (external battery)
SMC/BMP/Pigtail type
XLR type
Cable length
SMC/BMP type
Pigtail type
5 dB SPL or less
125 dB SPL
IECR6 or LR6*1
Approx. 6000 h*1
DC 12 to 48 V*1
DC 1.5 V*1
DC 1.1 to 10.0 V
0.3 mA or less*1
2 mA or less*1
0.4 mA or less
2.5 m (8.2 feet)
1.2 m (3.9 feet)
2.5 m (8.2 feet)
5 dB SPL or less
120 dB SPL
IECR6 or LR6
Approx. 6000 h
DC 12 to 48 V
DC 1.5 V
DC 1.1 to 10.0 V
0.3 mA or less
2 mA or less
0.4 mA or less
3.0 m (9.8 feet)
1.2 m (3.9 feet)
3.0 m (9.8 feet)
5 dB SPL or less
130 dB SPL
IECR6 or LR6
Approx. 400 h
DC 24 to 48 V
DC 1.5 V
DC 1.1 to 10.0 V
3.5 mA or less
2 mA or less
0.4 mA or less
3.0 m (9.8 feet)
1.2 m (3.9 feet)
—
5 dB SPL or less
126 dB SPL
IECR6 or LR6
Approx. 6000 h
DC 12 to 48 V
DC 1.5 V
—
0.3 mA or less
2 mA or less
—
3.0 m (9.8 feet)
—
—
5 dB SPL or less
122 dB SPL
IECR6 or LR6
Approx. 6000 h
—
DC 1.5 V
DC 1.1 to 10.0 V
0.3 mA or less
—
0.4 mA or less
3.0 m (9.8 feet)
1.2 m (3.9 feet)
3.0 m (9.8 feet)
—
130 dB SPL
—
—
—
—
DC 1.1 to 10.0 V
—
—
0.4 mA or less
—
1.2 m (3.9 feet)
—
3.5 x 3.5 x 16.8 mm
(5/32 x 5/32 x 11/16 inch)
Clip attachment area:3.9 mm
(5/32 inch) diameter
5.6 diameter x 12.5 mm
(1/4 diameter x 1/2 inch)
10.6 diameter x 24.2 mm
(7/16 diameter x 31/32 inch)
10.6 diameter x 21 mm
(7/16 diameter x 27/32
inch)
8.5 diameter x 14.5 mm
(11/32 diameter x 19/32
inch)
12.5 diameter x 23.5 mm
(1/2 diameter x 15/16 inch)
Microphone head
Dimensions
Power unit (XLR type only)
Mass
Supplied accessories
Microphone head only
Total
XLR type
SMC type
BMP type
Pigtail type
20.0 diameter x 133 mm
20.0 diameter x 163 mm
(13/16 diameter x 5 1/4
(13/16 diameter x 6 1/2
inches)
inches)
0.6 g (0.02 oz)
1.5 g (0.05 oz)
7 g (0.25 oz)
162 g (5.7 oz)
122 g (4.3 oz)
167 g (5.9 oz)
22 g (0.7 oz)
23 g (0.8 oz)
30 g (1.1 oz)
—
17 g (0.6 oz)
—
20 g (0.7 oz)
26 g (0.9 oz)
—
Single/Horizontal type tie
Single/Horizontal type tie
*4
Single/Horizontal type tie clip
clip (x1) , Single/Vertical
clip (x1), Single/Vertical type
4
*5
(x1)*2, Single/Vertical type tie
type tie clip (x1)* ,
tie clip (x1) , Urethane type
clip (x1)*2, Double/Horizontal
Double/Horizontal type tie windscreen (x1), Microphone
*3
type tie clip (x1) , Urethane
clip (x1), Metal-mesh type
case (x1), Operating
type windscreen (x1)*2,
windscreen (x1), Microphone
instructions (x1)
*4
Microphone case (x1)*3,
case (x1) , Operating
Operating instructions (x1),
instructions (x1)
Operating instructions (x1),
Ferrite clamp (x1)
20.0 diameter x 144 mm
(13/16 diameter x 5 3/4 inches)
*1 ECM-88B used with the supplied DC-78 battery unit.
*2 ECM-88FPT is not supplied with mic accessories.
*3 Double / Horizontal type tie clip and microphone case are supplied with ECM-88B only.
20.0 diameter x 133 mm
20.0 diameter x 126 mm
(13/16 diameter x 5 1/4
—
(13/16 diameter x 5 inches)
inches)
6.5 g (0.23 oz)
2 g (0.07 oz)
3.5 g (0.12 oz)
127 g (4.5 oz)
121 g (4.3 oz)
—
—
24 g (0.8 oz)
25 g (1.0 oz)
—
18 g (0.6 oz)
19 g (0.7 oz)
—
29 g (1.0 oz)
—
Single/Horizontal type tie Single/Horizontal type tie Single/Horizontal type tie
clip (x1), Single/Vertical
clip (x1), Urethane type
clip (x1), Urethane type
type tie clip (x1),
windscreen (x1),
windscreen (x1), Operating
*6
Double/Horizontal type tie Microphone case (x1) ,
instructions (x1)
clip (x1), Metal-mesh type Operating instructions (x1)
windscreen (x1),
Microphone case (x1),
Operating instructions (x1)
*4 Single / Vertical type tie clip, Double / Horizontal type tie clip, and microphone case are supplied with ECM-77B only.
*5 Single / Vertical type tie clip and microphone case are supplied with ECM-66B only.
*6 The microphone case is supplied with ECM-44B only.
ECM Series
Specifications
XLR type (Supplied with a battery unit and XLR-3-12C type connector.)
Model Variations SMC type (Supplied with a Sony 4-pin <SMC9-4P> connector.)
BMP type (Supplied with a 3.5 mm diameter, 3-pole mini plug.)
Pigtail type (Supplied without a connector <pigtail>.)
ECM-V1 Series*1
ECM-X7 Series*2
—
—
ECM-V1BMP
ECM-322 Series
ECM-LZ1UBMP
ECM-HZ1UBMP
ECM-GZ1UBMP
—
—
—
—
—
—
ECM-322BC
—
—
—
ECM-X7BMP
ECM-322BMP
ECM-LZ1UBMP
ECM-HZ1UBMP
ECM-GZ1UBMP
—
—
—
—
—
—
Electret Condenser
Electret Condenser
Electret Condenser
Electret Condenser
Electret Condenser
Electret Condenser
Frequency response
40 Hz to 20 kHz
100 Hz to 15 kHz
50 Hz to 18 kHz
60 Hz to 18 kHz
60 Hz to 18 kHz
20 Hz to 22 kHz
Directivity
Uni-directional
Uni-directional
Omni-directional
Uni-directional
Uni-directional
Uni-directional
—
−43.0 ± 3 dB
—
−44.0 ± 3 dB
—
−42 dB ± 3 dB
—
–31.0 dB ±3.0 dB
—
–31.0 dB ±3.0 dB
-55.0 dB ±3.0 dB
Capsule type
Sensitivity
XLR type
(0 dB=1 V/Pa, at 1 kHz)
SMC/BMP/Pigtail type
Output impedance
XLR type
—
—
—
—
—
—
—
1.2 kΩ ± 30%
(unbalanced)
1.2 kΩ ± 30%
(unbalanced)
1.4 kΩ ± 30% (unbalanced)
1.4 kΩ ± 30%
(unbalanced)
1.4 kΩ ± 30% (unbalanced)
600Ω±30%
Dynamic Range
86 dB or more
88 dB or more
81 dB or more
94dB or more
94dB or more
120dB or more
Signal-to-noise ratio (A-weighted, 1 kHz, 1 Pa.)
60 dB or more
62 dB or more
60 dB or more
68dB or more
68dB or more
64dB or more
34 dB SPL or less
32 dB SPL or less
34 dB SPL or less
26dB SPL or less
28dB SPL or less
30dBSPL or less
—
—
—
—
—
—
120 dB SPL
—
—
—
—
—
120 dB SPL
—
—
—
—
—
115 dB SPL
—
—
—
—
—
120dB SPL
—
—
—
—
—
120dB SPL
—
—
—
—
—
150dB SPL
—
—
—
—
DC 5 V
DC 5 V
DC 1.1 to 10.0 V
DC 1.5 to 10 V
DC 1.5 to 10 V
DC 3 to 10 V
—
—
—
—
—
—
—
—
—
—
—
—
0.2 mA or less
0.2 mA or less
1.3 mA or less
0.6mA or less
0.6mA or less
0.6mA or less
—
—
—
—
—
—
1.2 m (3.9 feet)
1.2 m (3.9 feet)
1.2 m (3.9 feet)
1.2 m (3.9 feet)
1.2 m (3.9 feet)
1.8 m (5.9 feet)
—
—
—
—
at 1 kHz
SMC/BMP/Pigtail type
Inherent noise (0dB SPL = 2E-5 Pa.)
Wind noise (with windscreen, at 2m/s)(0 dB SPL = 2E-5 Pa.)
Induction noise from external magnetic field (dB SPL/1E-7 T, 0 dB SPL = 2E-5 Pa.)
Maximum input sound pressure level (0 dB SPL = 2E-5 Pa.)
Battery
Power supply (XLR type only)
Battery life (LR6)
External power
Power requirements
XLR type
SMC/BMP/Pigtail type
Current drain
XLR type (internal battery)
XLR type (external battery)
SMC/BMP/Pigtail type
XLR type
Cable length
SMC/BMP type
Pigtail type
6.8 diameter x 19.5 mm 11.5 diameter x 20.5 mm
Dimensions
55 dB SPL or less
(without windscreen)
—
—
8.4 diameter (capsule case) x
168 mm
15 diameter (capsule
case) x 25 mm
15 diameter (capsule case) 13 diameter (capsule case)
x 170 mm
x 29 mm
Microphone head
(9/32 diameter x 25/32
inch)
Power unit (XLR type only)
Microphone head only
Total
XLR type
Mass
SMC type
BMP type
Pigtail type
Supplied accessories
*1 The characteristics are measured as UTX-B2V.
*2 The characteristics are measured as UTX-B2X.
(15/32 diameter x 13/16
(11/32 diameter x 6 5/6 inch) (19/32 diameter x 1 inch)
inch)
—
—
—
—
—
—
—
—
—
—
—
10 g (0.4 oz) without
connector
10 g (0.4 oz) without
16.2 g (0.57 oz)
18.0 g (0.63 oz)
connector
—
—
—
Single/Horizontal type tie Single/Horizontal type
Headband (x1), clip (x1),
clip (x1), Urethane type
tie clip (x1), Urethane Carrying case (x1), Operating
windscreen (x1),
type windscreen (x1),
instructions (x1)
Operating instructions
Operating instructions
(x1)
(x1)
—
—
—
—
5 g (0.18 oz) without
connector
—
Mic holder clip (x1),
Windscreen (x1),
Operating instructions
(x1)
(19/32 diameter x 6 3/4
inch)
(17/32 diameter x 1 3/16
inch)
—
—
—
—
—
—
—
—
10 g (0.35 oz) without
25 g (0.9 oz) without
connector
connector
—
—
Headband (x1), Cord clip Windscreen (x1), Carrying
(x1), Windscreen (x1),
pouch (x1), Operating
Operating instructions (x1)
instructions (x1)
ECM Series
Optional Accessories
ECM-88
ECM-77
ECM-66
ECM-55
ECM-44
Single/Horizontal
type tie clip
SAD-H77B (x 10)
Single/Vertical
type tie clip
SAD-V88B (x 6)
ECM-X7
ECM-LZ1UBMP
SAD-W88BL (x 6)
SAD-H55B (x 10)
SAD-H44B (x 10)
—
—
—
—
—
—
—
—
AD-R77B (x 6)
SAD-HV1B2 (x 4)
SAD-HV1B (x 4)
SAD-HZ1B (x 4)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
AD-RV1B2 (x 5)
AD-RX7 (x 6)
AD-RX7 (x 6)
AD-RX7 (x 6)
AD-RX7 (x 6)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
AD-C77B (x 12)
Color
windscreens
AD-R66B (x 12)
—
—
AD-R44B (x 12)
—
—
—
AD-C77 (x 2 sets)
—
DC-78 Supplied
with ECM-88B
DC-78
Microphone
accessory kit
DC-78
—
AD-KIT88B
—
AD-R55B (x 6)
Urethane
windscreen
AD-C88 (x 2 sets)
—
SAD-S77 (x 6)
—
AD-R88B (x 12)
ECM-LZ1UBMP
SAD-W77BL (x 6)
Safety-pin type
microphone
holder
SAD-S88B (x 6)
SAD-H55B (x 10)
ECM-LZ1UBMP
SAD-V77B (x 10)
Double/
Horizontal
Type tie clip
DC power
supply unit
(SMC9-4S to
XLR 3-pin)
ECM-V1
—
SAD-H88B (x 6)
Metal-mesh
windscreen
ECM-166
AD-KIT77
—
DC-78
DC-78
—
—
F Series
Dynamic Microphones
F Series
Dynamic microphones
F-780
Uni-directional Dynamic
Microphone
• For critical vocal recording, professional sound
reinforcement and broadcast production
• Rugged capsule in a resilient body structure
• Special AlNiCo magnet provides excellent sensitivity,
powerful and accurate sound reproduction.
• Edgewise winding voice coil with lightweight CCAW
(Copper Clad Aluminum Wire) provides powerful, crisp,
clean sound in the mid and high frequency range.
F-720
Uni-directional Dynamic
Microphone
• For general presentation and speech use in schools,
halls, churches and other industrial applications
• Virtually impervious to handling noise and vibration
because of efficient, one-piece capsule shock mount
• Convenient TALK switch to turn the microphone on
and off
Directivity Characteristics
Directivity Characteristics
Frequency Response Characteristics
Frequency Response Characteristics
F-115B
Omni-directional Dynamic
Microphone
• Ideal for sound pick-up, especially under adverse
weather conditions such as rain or heavy wind thanks
to its water-shedding, double-layered windscreen
• Newly developed omni-directional microphone
capsule for clear sound pick-up from any direction
• Metal body offers a high level of durability to withstand
severe conditions encountered in demanding sound
pick-up environments, and a special rubber at the
core of the microphone reduces shocks and
vibrations
• The directly connected microphone cable is waterresistant-limiting deterioration of internal parts
• Ideal for security and observation applications in
various outdoor environments
Directivity Characteristics
Frequency Response Characteristics
F Series
Dynamic microphones
Specifications
F-780
F-720
Capsule type
Frequency response
Directivity
F-112
Omni-directional Dynamic Microphone
• Ideal for field production and news gathering application,
especially for interviews
• Newly-developed omni-directional microphone capsule for clear
voice pick-up from any directions
• Metal body offers a high level of durability to withstand severe
conditions encountered in demanding sound pick-up
environments.
• Robust brass connector for repeating cable connections
• Optimized balance when combined with the wireless plug-on
transmitter included in the Sony UWP-V6 package (UTX-P1), WRT-8P,
and DWT-P01
50 Hz to 18 kHz
50 Hz to 18 kHz
40 Hz to 12 kHz
60 Hz to 18 kHz
Uni-directional
Omni-directional
-53 dB ±3 dB
-57 dB ±3 dB
Output impedance
400 Ω ±20%
500 Ω ±20%
Wind noise
F-112
Dynamic
Sensitivity
(0 dB=1 V/Pa at1 kHz)
Induction noise from
an external magnetic
field
F-115B
Less than 5 dB SPL/1 x Less than 10 dB SPL/1
10-7 T (1 mG)
x 10-7 T (1 mG)
Less than 50 dB SPL
Less than 55 dB SPL
Connector
-54 dB ±2 dB
-52 dB ±3 dB
400 Ω ±20%
Less than 5 dB SPL/1 x 10-7 T (1 mG)
Less than 40 dB SPL
Less than 40 dB SPL
XLR-3-12C type
Directivity Characteristics
Dimensions
Mass
ø37.6 x 160 mm
ø51 x 165 mm
(ø2 1/8 x 6 1/2 inches) (ø1 1/2 x 6 3/8 inches)
290 g (10.2 oz)
260 g (9.2 oz)
ø62 x 203 mm
(ø2 1/2 x 8 inches)
ø41.4 x 220 mm
(ø1 11/16 x 8 3/4 inches)
330 g (11.6 oz)
215 g (7.6 oz)
Microphone holder (PF 1/2) (x1),
Supplied accessories
stand adaptor (PF 1/2 to NS 5/8, PF 1/2 to W
3/8)
(x1 each), Operating instructions (x1)
Frequency Response Characteristics
*1 Pa=1x10-5 bar
*0 dB SPL=2x10-5 Pa
Operating instructions (x1)
Mixer
Recorder
Headphones
SRP/DMX/PCM/MDR Series
Mixer
SRP-X700P Digital Powered Mixer
• 6 x 1-AV switcher contains two RGB/component video inputs (with 5.1 surround sound), one
RGB input (with stereo audio), and three composite/S-video inputs (with stereo audio)
• Integrated high-quality six-input mixer comprised of four microphone, two microphone/line,
and two line inputs
• Mounting slots built in for two URX-M2 or WRU-806A/806B diversity receiver modules
• Audio-signal processing includes digital equalizer and dynamics processing for each
microphone channel, plus on-board digital feedback reducer
• Built-in 200 W + 200 W (4 Ω), 150 W + 150 W (8 Ω), max. 150 W (70 V line) digital power amplifier
SRP-X700P with two URX-M2 tuner modules installed
SRP-X500P Digital Powered Mixer
SRP-X500P with two URX-M2 tuner modules installed
• 5 x 1-AV switcher contains two RGB/component video inputs and three composite video
inputs (each with stereo audio)
• Integrated high-quality audio mixer with four microphone inputs and one stereo line input
• Mounting slots built in for two URX-M2 or WRU-806A/806B diversity receiver modules
• Audio-signal processing includes digital equalizer and dynamics processing for each
microphone channel, plus on-board digital feedback reducer
• Built-in four-channel digital power amplifier
SRP-X100 Rack Mount Audio Mixer
• 19-inch rack-mountable design
• Two microphone inputs (channel 1 to 2)
• Four mono inputs (channels 3 to 6, MIC/LINE switchable)
• Three stereo line inputs (channel 7 to 9)
• Master L and R outputs, switchable to mono outputs
• L/R Rec output carries all inputs (except channel 9 input to avoid feedback)
• Two mono sub outputs
Specifications
SRP-X500P
Receiving channels
Receiving frequencies
Power requirements
Power consumption
Dimensions (W x H x D)
Mass
SRP-X700P
Two channels when accommodating two URX-M2 tuner modules included in the UWP-X7/X8 package
SRP-X100P
—
566 MHz to 862 MHz
566 MHz to 862 MHz
—
AC 120/230 V, 50/60 Hz (CED/U2)
AC 120 V, 60 Hz (for U.S.A and Canada)
AC 220 V, 50/60 Hz (for China)
AC 230 V, 50/60 Hz (for other countries)
AC 120/230 V, 50/60 Hz (CED/U2)
150 W
120 W
19 W
482 x 132 x 350 mm (19 x 5 1/4 x 13 7/8 inches)
482 x 132 x 357 mm (19 x 5 1/4 x 14 inches)
482 x 44 x 175 mm (19 x 1 3/4 x 7 inches)
Approx. 13 kg (28 lb 11 oz)
Approx.12 kg (26 lb 3 oz)
Approx. 2.6 kg (5 lb 12 oz)
SRP/DMX/PCM/MDR Series
Mixer
DMX-P01
Digital Portable Mixer
Specifications
• Portable, digital field-mixer designed for ENG/EFP application
• 24-bit A/D and D/A converters and internal 32-bit DSP for excellent
sound quality
• 4 microphone/line inputs with +48 V mic power (on/off)
• 2 channels of balanced analog output and AES/EBU digital output
(stereo)
• Digital cascade input with phono connector
• Coaxial output connector for mix-bus output or S/PDIF digital output
• Selectable sampling rate: 48 kHz or 96 kHz
• Full control of every parameter from the front panel
• Digital limiters on both inputs and outputs, and digital compressors
on outputs
• A scene memory recall feature to instantly recall
• A power-on memory function recalls parameters in three different
ways
• Easy-to-read backlit LCD panel displays output levels and setup
menus
• Camera-audio return-level check via 12-pin connector
• Panel lock and parameter lock function
• Operates on eight AA-size alkaline (LR6) batteries or external DC 10
to 15 V power
LEFT PANEL
RIGHT PANEL
DMX-P01 Digital Portable Mixer
Mic Input
Line Input
Four XLR-3-31 (female) connectors
Selectable mic -70 dBu to -30 dBu (max 0 dBu) or line level -30 dBu to +10 dBu (max. +24 dBu)
Four XLR-3-31 (female) connectors
Selectable mic -70 dBu to -30 dBu (max 0 dBu) or line level -30 dBu to +10 dBu (max. +24 dBu)
Master output (analog) 2 ch: +4 dBu, -10 dBu, -60 dBu, (max. +24 dBu) , XLR-3-32 (male) (x2)
Line Output
Digital output 2 ch: AES/EBU / XLR-3-32 (male) (x1),
S/PDIF (or Cascade output) (x1)/ IEC 60958 coaxial phono connector, unbalanced
Tape output (analog) 2 ch: -10 dBu, (max. -10 dBu) O1/8" TRS jack, unbalanced, 10 kohms or more
Frequency Response
Total Harmonic Distortion (Line Input to Line Output)
Signal Processing
Power Consumption
Power Requirements
Dimensions (W x H x D)
Mass
Supplied Accessories
20 Hz to 40 kHz +0.5/-3.0 db (@ 96 kHz)
Less than 0.05%
Digital limiter and LCF on each input, digital limiter and compressor on main output
Internal: DC 12 V (eight AA-size alkaline batteries)
External: DC 12 V via DC jack or DC 10 V to 15 V via XLR-4-32 (female)
DC 12V
266 x 68 x 206 mm (10 1/2 x 2 3/4 x 8 1/8 inches)
Approx. 2.2 kg (Approx. 4lb 13 oz)
12-pin multi-connector (1), Meter scale sheets (6 types), Battery holders (2),Feet (4),Operation instruction CD-ROM (1), Operation manual (x1)
SRP/DMX/PCM/MDR Series
Products
Specifications
Audio Formats Supported
PCM-D100
Portable High Resolution
Audio Recorder
• DSD, PCM, and MP3 recording
• Built-in high-quality Electret Condenser
Microphones, adjustable from 90°-120°
• Built-in 32GB internal Flash Memory and
Optional SD Card slot
• 5-Second Pre-record Buffer*1
• Divide/Combine duuring playback*1
• Track Mark Support*2
• Dual Signal Path Mic Pre and ADC*3
• Cfade-in, Fade-Out for LPCM self recordings
• Super Bit Mapping for LPCM 16 bit self recording
*1 For PCM+MP3+SDS self recordings
*2 For PCM+MP3 self recordings
*3 Optional modes for PCM+MP3 self recordings
Built-in Mic
• User-friendly Operation
• 96kHz 24bit Recording
• 4GB Built-in Flash Memory
• 5 Second Pre-Record Buffer
• microSD / Memory Srick Micro (M2 ) Slot
• WAV and MP3 Format Record / Play
• Digital Pitch Control
• Sound Forge Audio Studio LE Software
Included
Electret condenser microphones. Max input
Electret condenser microphones. Max input level:
level: 123 dB SPL. Frequency response 20
128 dB SPL. Frequency response 20 Hz to 20 kHz
Hz to 20 kHz
(Stereo Mini Jack)
(Stereo Mini Jack) Input impedance: 22 k ohm,
Rated input level: 2.5 mV; Minimum input level: Input impedance: 22 k ohm, Rated input
0.7 mV
level: 2.5 mV; Minimum input level: 0.9 mV
Line Input (Analog)
(Stereo Mini Jack) Input impedance: 22k ohm;
(Stereo Mini Jack) Input impedance: 22k
Minimum input level: 450mV; Rated input level: ohms; Minimum input level: 500mV; Rated
2.0V
input level: 2.0V
Line Input (Optical)
Optical Digiital Input: Input level: -27 dBm to -14
dBm; Emission wavelength: 660 nm
NA
Line Output (Analog)
Output impedance: 220 ohms;Output level: 1.7V;
Load impedance 22k ohms
Line out available from headphone jack
(menu selectable)
Line Output (Optical)
Output level: -21dBm to -15 dBm
NA
Headphone Output
Stereo Mini Jack; Maximum output: 25 mW + 25 Stereo Mini Jack; Maximum output: 20 mW
mW or more; Load impedance: 16 ohms
+ 20 mW; Load impedance: 16 ohms
Frequency Response
20Hz - 50kHz (Line In) @ DSD2.8 ; 20Hz - 45kHz
(Line In) @ LPCM 192kHz/24bit
20 Hz to 40 kHz (Line in) @ 96KHz
Sampling Frequency
DSD 2.8MHz; LPCM
192kHz/176.4kHz/96kHz/88.2kHz/48kHz/44.1kH
z
22.05kHz, 44.1kHz, 48kHz and 96kHz
S/N Ratio
Portable Linear PCM Recorder
PCM-M10
Record: .WAV and MP3; Playback: .WAV,
.MP3, .WMA (Non DRM), .M4A (AAC-LC,
Non-DRM)
Mic Input
Quantization
PCM-M10
PCM-D100
Record: DSD, WAV and MP3; Playback: DSD,
WAV, FLAC, MP3, WMA (Non DRM), AAC-LC
(Non-DRM)
Total Harmonic Distortion
(Line Input to Line Output)
Wow and Flutter
USB
Power Consumption
Power Requirements
DC Input Jack
Battery Life
Memory Stick Slot
Dimensions
Weight
16-bit LPCM, 24-bit PCM and 1-bit DSD
16-bit linear, 24-bit linear
DSD 98dB or greater; LPCM 24 bit 96dB or
greater
87dB or greater (1KHz IHF-A) when set to
24-bit
DSD: 0.008% or below (1kHz, 22kHz LPF)
0.03% or below (1kHz, 22kHz LPF)
LPCM: 0.006% or below (1kHz, 22kHz LPF)
Below measurable limit (less than +/0.001%W.Peak)
Below measurable limit (less than +/0.001%W.Peak)
High-speed USB,mass storage class
High-speed USB,mass storage class
0.75w
0.27w
Four AA size Alkaline batteries (supplied). Four
AA NiMH Rechargable batteries (optional)
Two AA size Alkaline batteries (supplied).
Two AA NiMH Rechargable batteries
(optional)
6V
3V
25 hrs @44.1kHz/16 bit; 18 hrs @192kHz/24bit
or 12 hrs @ DSD2.8
24 hrs @ 44.1KHz/16-bit or 19 hrs @
96KHz/24-bit
Accepts SD, SD-HC,SD-XC, Memory Stick Pro
Duo and Memory Stick Pro-HG
Accepts Memory Stick Micro (M2) and
microSD
"2 7/8" x 6 1/8" x 1 1/4" (w x h x d) not including
projecting parts and controls"
2 1/2" x 4 1/2" x 7/8" (w x h x d) not
including projecting parts and controls
13.9 oz (including batteries)
6.6 oz (including batteries)
SRP/DMX/PCM/MDR Series
Products
MDR-7520
MDR-7550
Professional Headphones
Professional In-Ear Headphones
• 50mm Driver Unit with LCP Diaphragm
• Closed-Ear Design
• Wide Frequency Response
• High Power Handling Capacity 4,000mW
• Stereo Unimatch Plug
• Gold Connectors and OFC Cord
• Supplied Soft Case
• 16mm Driver Unit with ML Diaphragm
• In-Ear Monitor (IEM) Design
• Flexible Ear Hanger Ensures Superior Fit
• Hybrid Silicone/Rubber Earbuds, 3 Sizes Supplied
• Supplied Soft Case
MDR-7510
Professional Headphones
• 50mm Driver Unit with PET Diaphragm
• Closed-Ear Design
• Wide Frequency Response
• High Power Handling Capacity 2,000mW
• Stereo Unimatch Plug
• Gold Connectors and OFC Cord
• Supplied Soft Case
MDR-7502
MDR-7506
• 40mm Driver Unit
• Closed-Ear Design
• Folding Construction
• Stereo Unimatch Plug
• Gold Connectors and OFC Cord
• Supplied Soft Case
• 30mm Driver Unit
• Closed-Ear Design
• Stereo Unimatch Plug
• Gold Connectors and OFC Cord
Professional Headphones
Professional Headphones
Specifications
Headphone Type
Magnet Type
MDR-7550
MDR-7520
MDR-7510
MDR-7506
MDR-7502
Dynamic, In-Ear
Dynamic. Closed
Dynamic, Closed
Dynamic, closed
Dynamic, closed
Neodymium
Neodymium
Neodymium
Neodymium
Neodymium
Driver Size
16.0 mm
50.0mm
50.0mm
40.0 mm
30.0 mm
Frequency Response
3-28kHz
5-80kHz
5-40kHz
10-20kHz
60-16kHz
Impedance
16 Ohms
24 Ohms
24 Ohms
63 Ohms
24 Ohms
Sensitivity
108 dB/mW
108 dB/mW
108 dB/mW
106 dB/W/m
102 dB/mW
2,000mW
1,000mW
Power Handling
Plug Type
Cord Length
Weight
Supplied Accessories
500mW
4,000mW
Gold, Stereo Unimatch plug 1/4" and 1/8"
Gold, Stereo Unimatch plug 1/4" and 1/8"
5.25 ft
.25 oz
Carrying Case, UniMatch Plug,
Silicone/Rubber Hybrid Earbuds, 3 Sizes
9.8 ft
9.5 oz
Carrying Pouch,
Unimatch Plug
Gold, Stereo Unimatch plug 1/4" and 1/8"" Gold, Stereo Unimatch plug 1/4" and 1/8"
9.8 ft
9.2 oz
Carrying Pouch,
Unimatch Plug
9.8 ft
8.1 oz
Carrying Bag,
UniMatch Plug
500mW
Gold, Stereo Unimatch plug 1/4" and 1/8"
6.5 ft
5.1 oz.
Carrying Bag,
UniMatch Plug
Distributed by
MK11184V2PDC15MAR
©2015 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
The values for mass and dimension are approximate.
“SONY”, “DWX”, “WiDIF” and “Cross Remote” are trademarks of Sony Corporation.
All other trademarks are the property of their respective owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement