Backyard Discovery #1606012 Wooden Playset Assembly Instructions

OCEANVIEW
WOODEN PLAYSET
MODEL: #1606012
Backyard Discovery
3305 Airport Drive
Pittsburg, KS 66762
1-800-856-4445
••
••
••
••
Owner's Manual
Frequently Asked Questions
Assembly Instructions
Warranty Information
Register your new swing set on-line @ www.swingsetsonline.com
(you will also find any updates on assembly instructions and
information to order replacement parts)
Features the
fastening system.
Save this assembly manual for future reference in the event that
you need to order replacement parts.
INS-1606012-A-OCEANVIEW-ENG-07-21-15
Made in China
STOP
PARE
Missing A Part?
CALL US BEFORE GOING
BACK TO THE STORE!
The store where you made your purchase
does not stock parts for this item.
If you have assembly questions or if you need parts,
whether they are missing or damaged
Call Toll-Free Help Line or visit www.swingsetsonline.com
¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA!
La tienda donde realizó la compra no almacena piezas de este producto.
Si tiene preguntas sobre el ensamblaje o si necesita piezas debido a que
faltan o están dañadas
llame gratis a la línea de ayuda
1-800-856-4445
PLEASE READ THIS BEFORE STARTING ASSEMBLY
POR FAVOR LEA ESTAS INSTRUCCIONES ANTES DE COMENZAR EL ENSAMBLAJE
•
•
•
•
•
•
•
•
•
•
•
READ THE ASSEMBLY MANUAL COMPLETELY, PAYING SPECIAL ATTENTION TO THE IMPORTANT TIPS AND
SAFETY INFORMATION.
AFTER YOU HAVE READ THE ASSEMBLY MANUAL, YOU WILL BE ABLE TO DECIDE IF YOU NEED PROFESSIONAL
HELP TO COMPLETE THE ASSEMBLY OF THE STRUCTURE.
SEPARATE AND IDENTIFY ALL PARTS TO MAKE SURE THAT YOU HAVE ALL OF THE PARTS LISTED.
IF YOU CAN’T FIND ALL OF THE PARTS, CHECK THE PACKING MATERIAL. SMALL PARTS MAY HAVE FALLEN INTO IT
DURING SHIPMENT.
IF YOU HAVE PROBLEMS WITH THE ASSEMBLY OR IF ANY PART IS MISSING OR
DAMAGED, PLEASE CALL THE
HELP LINE 1-800-856-4445 OR VISIT www.swingsetsonline.com
LEA EL MANUAL DE ENSAMBLAJE COMPLETAMENTE, PRESTANDO ESPECIAL ATENCIÓN A LOS CONSEJOS ÚTILES
IMPORTANTES Y A LA INFORMACIÓN SOBRE SEGURIDAD.
DESPUÉS DE QUE HAYA LEÍDO EL MANUAL DE ENSAMBLAJE, PODRÁ DECIDIR SI NECESITA AYUDA PROFESIONAL
PARA EFECTUAR EL ENSAMBLAJE DE LA ESTRUCTURA.
SEPARE E IDENTIFIQUE TODAS LAS PIEZAS PARA COMPROBAR QUE DISPONE DE TODAS LAS PARTES INDICADAS.
SI NO PUEDE ENCONTRAR TODAS LAS PIEZAS, REVISE EL MATERIAL DE EMPAQUE. ES POSIBLE QUE ALGUNAS
PIEZAS PEQUEÑAS PUEDAN HABERSE CAÍDO ALLÍ DURANTE EL ENVÍO.
MANTÉNGASE ALEJADO DE LOS NIÑOS MENORES A LA EDAD RECOMENDADA.
SI TIENE PROBLEMAS CON EL ENSAMBLAJE O SI ALGUNA PIEZA FALTA O ESTÁ DAÑADA, LLAME A LA LÍNEA DE
AYUDA AL 1-800-856-4445 O VISITE www.swingsetsonline.com
PLEASE HAVE THE FOLLOWING INFORMATION WHEN YOU MAKE YOUR CALL:
1 – MODEL NUMBER OF THE PRODUCT LOCATED ON THE FRONT OF THE ASSEMBLY MANUAL
2 – DESRIPTION OF THE PART FROM THE PARTS LIST
POR FAVOR TENGA VISIBLE LA SIGUIENTE INFORMACIÓN CUANDO LLAME:
1 - NÚMERO DE MODELO DEL PRODUCTO QUE SE ENCUENTRA UBICADO AL FRENTE DEL MANUAL
DE ENSAMBLAJE
2 - DESCRIPCIÓN DE LA PIEZA QUE SE ENCUENTRA EN LA LISTA DE PIEZAS
Owner’s Manual Play Set
Dear Customer:
Please read entire booklet completely before beginning the assembly process.
Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public
use. The Company does not warranty any of its residential structures subjected to commercial use
such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial
Application.
WARNING: This Symbol points out important safety instructions which, if not followed, could
endanger the personal safety of yourself and your children and/or damage your property. You
MUST read and follow all instructions in this manual before attempting to use this playcenter.
WARNING: Children must NOT use this playcenter until unit has been completely
assembled and inspected by an adult to insure set has been properly installed and
anchored.
Please follow all recommendations below. Failure to do so may result in the warranty being void and/or
safety violations that could result in serious injury. This manual contains helpful information concerning
Assembly Preparation, Installation Procedure, and Required Maintenance. Always keep the safety of your
children in mind as your play structure is being built and as your children play on the set. Before your children
play on the set please review the Operation Instructions with them to help ensure their safety.
PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. KEEP THEM IN A SAFE PLACE
WHERE YOU CAN REFER TO THEM AS NEEDED. IN ORDER TO PROVIDE YOU WITH THE MOST
EFFICIENT SERVICE, IT IS REQUIRED THAT YOU PROVIDE US WITH THE PART NUMBERS WHEN
ORDERING PARTS.
For Your Records:
Please take time and fill out the information below. This information will be needed for warranty
issues.
Staple Receipt Here
Where Purchased: ____________________
Date of Purchase: ____________________
Installation Date: _____________________
Installed by: _________________________
Tracking Number: ____________________
OR
Tracking Number
Vertical ID Plate
Tracking Number Reference Label
Tracking ID number on the carton and back of the ID plate or vertical ID plate are included for tracking
purposes associated with warranty claims.
Rev10/14/13
Owner’s Manual Play Set
Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height.
Positioning Your Playcenter
1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult helper. Place
in a flat area of your yard to minimize ground preparation.
2. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over
and loose-fill surfacing material washing away during heavy rains.
3. Place the equipment not less than 6 ft (1.8 m) from any structure or obstruction such as a fence,
garage, house, overhanging branches, laundry lines, or electrical wires.
4. Provide enough room so that the children can use the equipment safely. For example, for structures
with multiple play activities, a slide should not exit in front of a swing.
5. It is a good idea to place your Playcenter in an area that is convenient for adults to watch children at
play.
6. Create a site free of obstacles that could cause injuries – such as low overhanging tree branches,
overhead wires, tree stumps and/or roots, large rocks, bricks and concrete. Additional suggestions in
the Suggested Playground Surfacing Section.
7. Do not build your playset on top of surfacing material.
8. Locate bare metal platforms and slides out of direct sunlight to reduce the likelihood of serious burns.
A slide that faces north will receive the least direct sunlight.
9. Separate active and quiet activities from each other. For example, locate sandboxes away from swings
or use a guardrail or barrier to separate the sandbox from the movement of the swings.
Suggested Playground Surfacing
Do not install home playground equipment over concrete, asphalt, packed earth, grass, carpet, or any
other hard surface. A fall onto a hard surface can result in serious injury to the equipment user.
Do not install loose fill surfacing over hard surfaces such as concrete or asphalt.
Shredded bark mulch, wood chips, fine sand and fine gravel, are added as shock absorbing materials
after assembly. If used properly these materials can absorb some of the impact of a child’s fall.
All surface material should extend a minimum of 6 feet in all directions around the play area.
Do not apply playground surfacing until after the unit is completely constructed. Playset should not be
built on top of surfacing.
Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape
edging.
Installations of rubber tiles or poured-in-place surfaces (other than loose-fill materials) generally require
a professional and are not “do-it-yourself” projects.
Shall use Playground Surfacing Materials (other than loose-fill material) which comply with the safety
standard ASTM F1292 Standard Specification of Impact Attenuation of Surfacing Materials within the
Use Zone of Playground Equipment.
Rev10/14/13
Owner’s Manual Play Set
The following chart explains the fall height in feet from which a life threatening head injury
would not be expected
Critical Heights in feet (m) of Tested Materials
Material
Uncompressed Depth
Compressed Depth
6" (152mm)
9" (228mm) 12" (304mm)
to 9" (228mm)
Wood Chips
7' (2.13m)
10' (3.05m) 11' (3.35m)
10' (3.05m)
Double-Shredded bark mulch
6' (1.83m)
10' (3.05m) 11' (3.35m)
7' (2.13m)
Engineered Wood Fibers
6' (1.83m)
7' (2.13m) >12' (3.66m)
6' (1.83m)
Fine Sand
5' (1.52m)
5' (1.52m)
9' (2.74m)
5' (1.52m)
Coarse Sand
5' (1.52m)
5' (1.52m)
6' (1.83m)
4' (1.22m)
Fine Gravel
5' (1.52m)
7' (2.13m)
10' (3.05m)
6' (1.83m)
Medium Gravel
5' (1.52m)
5' (1.52m)
6' (1.83m)
5' (1.52m)
Shredded Tires*
10-12' (3.0-3.6m)
N/A
N/A
N/A
*This data is from tests conducted by independent testing laboratories on a 6-inch depth of uncompressed shredded tire samples produced by four manufacturers. The tests
reported critical heights, which varied from 10 feet to greater than 12 feet. It is recommended that persons seeking to install shredded tires as a protective surface request test
data from the supplier showing the critical height of the material when it was tested in accordance with ASTM F1292.
Operating Instructions:
NOTE: Your children’s safety is our #1 concern. Observing the following statements
and warnings reduces the likelihood of serious or fatal injury. Please review these
safety rules regularly with your children.
1. This Playcenter is designed for specific number of occupants whose combined weight should
not exceed a designated weight on the elevated floor or the swing area, the total Unit capacity
is outlined in the Basic Setup Dimensions section of instruction manual. The maximum fall
height and recommended play area is also available in the Basic Setup Dimensions section of
the manual for the specific unit.
2. On-site adult supervision is required.
3. Instruct children not to walk close to, in front of, behind, or between moving swings or other
moving playground equipment.
4. Instruct children to sit in and never stand on swings
5. Instruct children not to twist the chains and ropes and not to loop them over the top support
bar, since this may reduce the strength of the chain or rope.
6. Instruct children not to jump from swings or other playground equipment in motion.
7. Instruct children to not to push empty seats. The seat may hit them and cause serious injury.
8. Instruct and teach children to sit in the center of the swings with their full weight on the seats.
9. Instruct children not to use the equipment in a manner other than intended.
10. Instruct children to always go down slides feet first. Never slide head first.
11. Instruct children to look before they slide to make sure no one is at the bottom.
12. Instruct children to never run up a slide, as this increases their chances of falling.
13. The parents should dress children appropriately. (Examples would include the use of wellfitting shoes and the avoidance of ponchos, scarfs, and other loose-fitting clothing that is
potentially hazardous while using equipment).
14. Instruct children not to climb when the equipment is wet.
15. Instruct children to never jump from a fort deck. They should always use the ladder, ramp or
slide.
16. Instruct children to never crawl or walk across the top of monkey bars.
17. Instruct children to never crawl on top of a fort roof.
Rev10/14/13
Owner’s Manual Play Set
18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that
they cannot be looped back on it.
19. Instruct children not to attach items to the playground equipment that are not specifically
designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet
leashes, cables and chain as they may cause a strangulation hazard.
20. Instruct children to never wrap their legs around swing chain.
21. Instruct children to never slide down the swing chain.
22. Instruct children to remove their bike or other sports helmet before playing on playground
equipment.
Maintenance Instructions:
At the beginning of each play season:
• Tighten all hardware.
• Lubricate all metallic moving parts per manufacturer’s instructions.
• Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose,
cracked, or missing.
• Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or
other deterioration. Replace as needed.
• Check metal parts for rust. If found, sand and repaint using a non Lead-based paint meeting
the requirements of 16 CFR 1303.
• Check all wood members for deterioration and splinters. Sand down splinters and replace
deteriorating wood members.
• Reinstall any plastic parts, such as swing seats or any other items that were removed for the
cold season.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and
to maintain appropriate depth. Replace as necessary.
Twice a month during play season:
• Tighten all hardware.
• Check all protective coverings on bolts, pipes, edges, & corners. Replace if they are loose,
cracked, or missing.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and
to maintain appropriate depth. Replace as necessary.
• Once a month during play season.
• Lubricate all metallic moving parts per manufacturer’s instructions.
• Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or
other deterioration. Replace as needed.
At the end of each play season or when the temperature drops below 32° F:
• Remove plastic swing seats and other items as specified by the manufacturer and take
indoors or do not use.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and
to maintain appropriate depth. Replace as necessary.
Owners shall be responsible for maintaining the legibility of the warning labels.
Rev10/14/13
Owner’s Manual Play Set
Additional Maintenance:
• Check the swing beam and hardware every two weeks due to wood expansion and
contraction. It is particularly important that this procedure be followed at the beginning of each
season.
• Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season
causing splinters to appear. Light sand may be necessary to maintain a safe playing
environment. Treat your playset with stain regularly, to help prevent severe checking/splitting
and other weather damage.
• A waterbourne transparent stain has been applied to your playset. This is done for color only.
Once or twice a year, depending on your climate conditions, you must apply some type of
protection (sealant) to the wood of your unit. Prior to the application of sealant, lightly sand any
“rough” spots on your playset. Please note this is a requirement of your warranty.
• Assembling and maintaining the playset on a level location is very important. As your children
play, your playset will slowly dig its way into the soil, and it is very important that it settles
evenly. Make sure the playset is level and true one each year or at the beginning of each play
season.
Disposal Instructions:
When the Playcenter use is no longer desired, it should be disassembled and disposed of in such a
way that no unreasonable hazards will exist at the time the unit is discarded.
Third Party Assembly:
Customer may, in their sole discretion, elect to use a third party person or service to assemble this
product. Backyard Discovery assumes no responsibility or liability for any charge incurred by the
Customer for any assembly services’.
Please see our warranty for more information about damaged and missing part replacement
coverage. Backyard Discovery will not reimburse Customer for the price of parts purchased.
Rev10/14/13
Owner’s Manual Play Set
APPENDIX A
Information on Playground Surfacing Materials:
The following information is from the United States Consumer Product Safety Commission’s Information
Sheet for playground surfacing material; also see the following website for additional information:
www.cpsc.gov/cpscpub/pubs/323.html.
X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY
9
HANDBOOK
X3.1 Select Protective Surfacing—One of the most important things you can do to reduce the likelihood of serious head
injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be
applied to a depth that is suitable for the equipment height in accordance with ASTM Specification F 1292. There are different types of
surfacing to choose from; whichever product you select, follow these guidelines:
X3.1.1 Loose-Fill Materials:
X3.1.1.1 Maintain a minimum depth of 9 inches of loose-fill materials such as wood mulch/chips, engineered wood fiber
(EWF), or shredded/recycled rubber mulch for equipment up to 8 feet high; and 9 inches of sand or pea gravel for equipment up to 5
feet high. NOTE: An initial fill level of 12 inches will compress to about a 9-inch depth of surfacing overtime. The surfacing will also
compact, displace, and settle, and should be periodically refilled to maintain at least a 9-inch depth.
X3.1.2 Use a minimum of 6 inches of protective surfacing for play equipment less than 4 feet in height. If maintained properly,
this should be adequate. (At depths less than 6 inches, the protective material is too easily displaced or compacted.) NOTE: Do not
install home playground equipment over concrete, asphalt, or any other hard surface. A fall onto a hard surface can result in serious
injury to the equipment user. Grass and dirt are not considered protective surfacing because wear and environmental factors can
reduce their shock absorbing effectiveness. Carpeting and thin mats are generally not adequate protective surfacing. Ground level
equipment such as a sandbox, activity wall, playhouse or other equipment that has no elevated play surface – does not need any
protective surfacing.
X3.1.3 Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging. Don’t
forget to account for water drainage.
X3.1.3.1 Check and maintain the depth of the loose-fill surfacing material. To maintain the right amount of loose-fill materials,
mark the correct level on play equipment support posts. That way you can easily see when to replenish and/or redistribute the
surfacing.
X3.1.3.2 Do not install loose-fill surfacing over hard surfaces such as concrete or asphalt.
X3.1.4 Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles — You may be interested in using surfacing other than
loose-fill materials – like rubber tiles or poured-in-place surfaces.
X3.1.4.1 Installations of these surfaces generally require a professional and are not “do-it-yourself” projects.
X3.1.4.2 Review surface specification before purchasing this type of surfacing. Ask the installer/manufacturer for a report
showing that the product has been tested to the following safety standard: ASTM F 1292 Standard Specification for Impact Attenuation
of Surfacing Materials within the Use Zone of Playground Equipment. This report should show the specific height for which the surface
is intended to protect against serious head injury. This height should be equal to or greater than the fall height – vertical distance
between a designated play surface (elevated surface for standing, sitting, or climbing) and the protective surfacing below – of your play
equipment.
X3.1.4.3 Check the protective surfacing frequently for wear.
X3.1.5 Placement — Proper placement and maintenance of protective surfacing is essential. Be sure to:
X3.1.5.1 Extend surfacing at least 6 feet from the equipment in all directions.
X3.1.5.2 For to-fro swings, extend protective surfacing in front of and behind the swing to a distance equal to twice the height
of the top bar from which the swing is suspended.
9
This information has been extracted from the CPSC publications “Playground Surfacing — Technical Information Guide” and
“Handbook for Public Playground Safety.” Copies of these reports can be obtained by sending a postcard to the: Office of Public Affairs,
U.S. Consumer Product Safety Commission, Washington, D.C., 20207 or call the toll-free hotline: 1-800-638-2772.
The American Society for Testing and Materials takes no position respecting the validity of any parent right asserted in
connection with any item mentioned in this standard. Users of this standard are expressly advised that determination of the validity of
any such parent rights, and the risk of infringement of such rights, are entirely their own responsibility.
The standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years
and if not revised, either approved or withdrawn. Your comments are invited either for revision of this standard or for additional
standards and should be addressed to ASTM Headquarters. Your comments will receive careful consideration at a meeting of the
responsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you should
make your views known to the ASTM Committee on Standards. 100 Barr Harbor Drive, West Conshohocken, PA 19428.
Rev10/14/13
Play Set Assembly Manual FAQs:
1. Does the area for the playset need to be level?
Yes. Backyard Discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes
provided should be used to secure it firmly to the ground.
2. What size area is recommended for the playset?
Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the playset for maximum safety.
3. What age range is appropriate for the playsets?
Backyard Discovery playsets are recommended for children ages 3 – 10 years.
4. Is the wood treated with chemicals?
Backyard Discovery uses 100% Chinese Cedar wood which is naturally bug resistant, decay and rot resistant. To help ensure your child’s
safety, our wood is completely chemical free and we do not use pressure-treated wood. The stain we use is a top coat using a waterbased product that is for appearance only.
5. How often should the playset be stained?
Backyard Discovery recommends the playset be stained once each year. A water or oil based stain can be used at the customer’s
discretion.
6. Why does it seem that my swing set is developing cracks?
Wood is a natural material; no two pieces are exactly alike. Each piece has its own characteristics and personality and reacts differently
to climate changes. When any wood product is exposed to the elements, it develops “wood checks”. A check is the radial separation of
the wood fibers running with the grain of the wood. These are caused by the varying temperature and moisture conditions. A check is
not a crack – it does not affect the strength or durability of the wood or structural integrity of the play set.
7. Do Backyard Discovery playsets come with a warranty?
Yes. All Backyard Discovery products carry a 1-year replacement warranty on all parts for manufacturer’s defect. Our wood carries a 5
year warranty on rot and decay as well. Please see warranty details for more information.
8. What is the best way to get started assembling the playset?
Backyard Discovery recommends taking all the parts out of the boxes and arranging them by part number before you begin any
assembly. This will not only allow faster assembly, but will also identify any parts that may be missing or damaged so they can be
replaced before assembly. If parts are missing or need replacement, go to www.swingsetsonline.com/support.aspx and follow the
prompts to order them. Next, read the assembly manual and get the tools ready for the job as recommended in the manual. If the
assembly manual is lost or misplaced a new one can be printed from Backyard Discovery’s website: www.swingsetsonline.com.
9. The playset seems to rock or sway too much. What’s wrong?
Rocking is caused by uneven ground or obstructions such as rocks, roots, etc. under the ground rails. These should be removed and
the ground underneath re-leveled to prevent rocking. Also ensure the playset is securely staked to the ground using the stakes
provided.
10. The 2”x4” boards do not measure 2”x 4”. Why not?
In the U.S. it is common practice to describe lumber dimensions using the rough cut sizes from the sawmill and not the finished
dimensions. Retailers, home stores, etc. all use this accepted practice for describing lumber dimensions. However, Backyard Discovery
playsets are designed and constructed using the actual dimensions so everything fits properly and remains so during the life of the
playset.
11. The end beam is not straight up and down. Why not?
This is normal. Backyard Discovery designs playsets this way to ensure the strongest structure possible. The slight angle adds strength
and reduces rocking and twisting.
12. The S-hooks for the swings won’t close. What is wrong?
Backyard Discovery recommends placing them on a hard surface such as concrete (don’t do this on anything that will dent such as
metal or finished wood or glass which will break!). It will take quite a few strokes, but the hooks will close.
For more information and frequently asked questions, please refer to our website at www.swingsetsonline.com.
Tools Required for Installation:
(These are the tools that are generally required for assembly of our outdoor products. These tools
are not included with the outdoor product purchase.)
(Square)
(Level 24")
(Open End Wrenches 1/2")
(Tape Measure)
(3/16" , 5/16", 1/8" & 3/8" Drill Bits)
(Phillips Screw Driver)
(Claw Hammer)
(Rubber Mallet - Optional)
(Drill Attachments: Phillips
Head & Socket Driver)
(Ladder)
(3/8" Drive Ratchet, 1/2" STD
Sockets 1/2" Deep Sockets)
(An Adult w/ an Adult Helper)
(Cordless Drill or Electric Drill)
Basic Setup Dimensions
Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such
as a fence, garage, house, overhanging branches, laundry lines, or electrical wires.
21'-8"
[6.6 m]
28'-7 1/2"
[8.7 m]
16'-7 1/2"
[5.1 m]
6'
[1.8 m]
6'
[1.8 m]
Safe Play Zone
33'-8"
[10.3 m]
General Information:
Your set has been designed and engineered for
children only and for residential use only.
A maximum of 150 lbs. per child is recommended for
play activities designed for individual use.
A maximum of 120 lbs. per child is recommended for
play activities designed for multiple child use.
A maximum of 9 children is recommended for this
swing set.
12'-4 1/2"
[3.8 m]
Important Assembly Notes
6'-8 1/2"
[2 m]
Safe play height: 18'-5" [5.6 m]
Maximum fall height: 6'-8 1/2" [2 m]
1) While assembling unit, take time before and after each phase to make sure fort is level. If fort is
not level, assembly will be difficult and improper assembly may result. Extra care must be taken to
ensure the fort is square.
2) Tighten bolts securely, tighten nuts on bolts flush to the tube or member.
3) Pay close attention to the ITEMS NEEDED FOR EACH PHASE. They can be a valuable aid when
sorting your wood and hardware. Assembly will be made easier if items are sorted by phase.
4) Pay close attention to make sure you are using the correct hardware in the correct phases. Using
incorrect hardware may result in improper assembly.
5) Whenever a T-nut is used, follow these directions. Place T-nut in pre-drilled hole. Tap in with hammer.
Place bolt with washers in the opposite side. Hand tighten to make sure the bolt is in the T-nut.
DO NOT over tighten.
6) Read the steps of each phase thoroughly. The written steps may include important information not
shown in the illustrations.
Parts Identification
Wood Components
(NOT TO SCALE)
(1)
A50 - SWING BEAM - W4L06169
3 3/8"x5 1/4"x89 1/2" (86x134x2274)
(1)
E1 - UPRIGHT - W4L06055
1 3/8"x3 3/8"x86 1/8" (36x86x2186)
(1)
E2 - UPRIGHT - W4L06057
1 3/8"x3 3/8"x86 1/8" (36x86x2186)
(1)
E3 - UPRIGHT - W4L06069
1 3/8"x3 3/8"x63" (36x86x1600)
(1)
E4 - UPRIGHT - W4L06085
1 3/8"x3 3/8"x63" (36x86x1600)
(1)
E5 - UPRIGHT - W4L06090
1 3/8"x3 3/8"x63" (36x86x1600)
(1)
E6 - UPRIGHT - W4L06091
1 3/8"x3 3/8"x63" (36x86x1600)
(1)
E7 - UPRIGHT - W4L06051
1 3/8"x3 3/8"x57 3/8" (36x86x1457)
(1)
E8 - UPRIGHT - W4L06058
1 3/8"x3 3/8"x57 3/8" (36x86x1457)
(1)
E9 - UPRIGHT - W4L06061
1 3/8"x3 3/8"x57 3/8" (36x86x1457)
E10 - UPRIGHT - W4L06053
1 3/8"x3 3/8"x34 1/4" (36x86x869)
(1)
(1)
E11 - UPRIGHT - W4L06127
1 3/8"x3 3/8"x10 7/8" (36x86x275)
(1)
E50 - END SUPPORT - W4L06172
1 3/8"x3 3/8"x44 1/8" (36x86x1120)
(2)
(2)
E51 - ANGLE BRACE - W4L06171
1 3/8"x3 3/8"x88 3/4" (36x86x2254)
E74 - MONKEY BAR RAIL - W4L06149
1 3/8"x3 3/8"x60 5/8" (36x86x1539)
Parts Identification
Wood Components
(NOT TO SCALE)
(2)
E79 - MONKEY BAR UPRIGHT - W4L06150
1 3/8"x3 3/8"x84 1/2" (36x86x2148)
F1 - UPRIGHT - W4L06131
1 3/8"x2 3/8"x34 7/8" (36x60x887)
(2)
(1)
F2 - POST - W4L06070
1 3/8"x2 3/8"x30 3/8" (36x60x772)
(1)
F3 - POST - W4L06074
1 3/8"x2 3/8"x30 3/8" (36x60x772)
(1)
F4 - POST - W4L06093
1 3/8"x2 3/8"x30 3/8" (36x60x772)
(1)
G1 - WALL RAIL - W4L06086
1"x5 1/4"x76 3/4" (24x134x1948)
G2 - LADDER UPRIGHT - W4L06144
1"x5 1/4"x64 1/2" (24x134x1637)
(2)
(1)
G50 - GROUND BOARD - W4L06173
1"x5 1/4"x86 3/4" (24x134x2202)
(1)
H1 - HANDRAIL - W4L06132
1"x3 3/8"x88 3/4" (24x86x2253)
(1)
H2 - FLOOR SUPPORT - W4L06060
1"x3 3/8"x76 3/4" (24x86x1948)
(1)
H3 - FLOOR SUPPORT - W4L06083
1"x3 3/8"x76 3/4" (24x86x1948)
(1)
H4 - FLOOR SUPPORT - W4L06063
1"x3 3/8"x74 7/8" (24x86x1901)
(1)
H5 - SAFETY RAIL - W4L06059
1"x3 3/8"x68 5/8" (24x86x1742)
(1)
H6 - WALL RAIL - W4L06088
1"x3 3/8"x54 1/2" (24x86x1384)
(2)
H7 - WALL RAIL - W4L06100
1"x3 3/8"x54 1/2" (24x86x1384)
Parts Identification
Wood Components
(NOT TO SCALE)
H8 - FLOOR SUPPORT - W4L06079
1"x3 3/8"x54 3/8" (24x86x1382)
(1)
H9 - WALL RAIL - W4L06102
1"x3 3/8"x54 3/8" (24x86x1382)
(2)
H10 - FLOOR SUPPORT - W4L06062
1"x3 3/8"x52 1/2" (24x86x1334)
(1)
H11 - HANDRAIL - W4L06133
1"x3 3/8"x46" (24x86x1170)
(1)
(1)
H12 - FLOOR SUPPORT - W4L06125
1"x3 3/8"x20 3/8" (24x86x519)
H13 - WALL SPACER - W4L06126
1"x3 3/8"x3 3/8" (24x86x86)
(1)
(1)
(3)
H22 - DECK BRACE - W4L06082
1"x3 3/8"x18 3/8" (24x86x466)
(4)
H23 - DECK BRACE - W4L06179
1"x3 3/8"x17 7/8" (24x86x453)
(2)
H81 - MONKEY BAR BRACE - W4L06151
1"x3 3/8"x53 1/4" (24x86x1352)
H82 - MONKEY BAR GROUND BOARD - W4L06168
1"x3 3/8"x70 3/8" (24x86x1786)
(3)
H83 - WALL BOARD - W4L06182
1"x3 3/8"x61 1/4" (24x86x1557)
(1)
H84 - WALL BOARD - W4L06183
1"x3 3/8"x61 1/4" (24x86x1557)
(1)
H85 - SAFETY RAIL - W4L06184
1"x3 3/8"x75" (24x86x1904)
(2)
(1)
(2)
J1 - WALL RAIL - W4L06104
1"x2 3/8"x54 1/2" (24x60x1384)
J3 - WALL RAIL - W4L06092
1"x2 3/8"x27 1/4" (24x60x691)
(4)
H86 - ANGLE BRACE - W4L06186
1"x3 3/8"x49 3/8" (24x86x1254)
(2)
J6 - WALL RAIL - W4L06089
1"x2 3/8"x25 5/8" (24x60x650)
(2)
J2 - FLOOR JOIST - W4L06068
1"x2 3/8"x52 1/2" (24x60x1334)
J4 - OUTER CURTAIN ROD HOLDER - W4L05293
1"x2 3/8"x2 3/8" (24x60x60)
(2)
(1)
J5 - INNER CURTAIN ROD HOLDER - W4L05294
1"x2 3/8"x2 3/8" (24x60x60)
J7 - WALL RAIL - W4L06050
1"x2 3/8"x22 3/4" (24x60x579)
Parts Identification
Wood Components
(NOT TO SCALE)
(1)
J8 - FLOOR JOIST - W4L06134
1"x2 3/8"x20 3/8" (24x60x519)
(5)
J9 - SUPPORT BOARD - W4L06064
1"x2 3/8"x3" (24x60x76)
(1)
K1 - GROUND BOARD - W4L06052
5/8"x5 1/4"x74 1/2" (16x134x1893)
(1)
K2 - GROUND BOARD - W4L06056
5/8"x5 1/4"x74 1/2" (16x134x1893)
K3 - ARCHED RAIL - W4L06106
5/8"x5 1/4"x74 7/8" (16x134x1901)
(1)
(1)
K4 - GROUND BOARD - W4L06049
5/8"x5 1/4"x54 1/2" (16x134x1384)
(1)
K5 - GROUND BOARD - W4L06054
5/8"x5 1/4"x54 1/2" (16x134x1384)
K6 - ARCHED RAIL - W4L06084
5/8"x5 1/4"x54 1/8" (16x134x1374)
(1)
(1)
K7 - ARCHED RAIL - W4L06105
5/8"x5 1/4"x52 1/2" (16x134x1334)
(1)
K8 - WALL RAIL - W4L06095
5/8"x5 1/4"x49 1/2" (16x134x1256)
(1)
K9 - ARCHED RAIL - W4L06124
5/8"x5 1/4"x29 3/4" (16x134x756)
(8)
K10 - STAIR STEP BOARD - W4L06123
5/8"x4 5/8"x19" (16x119x483)
(2)
K11 - HALF MOON PLATE - W4L06115
5/8"x5 1/4"x12 5/8" (16x134x320)
(1)
K12 - GROUND BOARD - W4L06185
5/8"x5 1/4"x89 1/2" (16x134x2274)
Parts Identification
Wood Components
(NOT TO SCALE)
(1)
L1 - SUPPORT BOARD - W4L06128
5/8"x3 5/8"x22 3/4" (16x92x579)
(1)
L2 - SUPPORT BOARD - W4L06142
5/8"x4 3/8"x15 5/8" (16x112x397)
(1)
M1 - GROWTH BOARD - W4L06143
5/8"x3 3/8"x60 1/4" (16x86x1530)
(1)
M2 - WALL BOARD - W4L06097
5/8"x3 3/8"x61 1/4" (16x86x1557)
(1)
M3 - WALL BOARD - W4L06099
5/8"x3 3/8"x61 1/4" (16x86x1557)
(2)
M4 - WALL BOARD - W4L06109
5/8"x3 3/8"x61 1/4" (16x86x1557)
(1)
M5 - WALL BOARD - W4L06111
5/8"x3 3/8"x61 1/4" (16x86x1557)
(14)
M6 - FLOOR BOARD - W4L06066
5/8"x3 3/8"x54 1/2" (16x86x1384)
(1)
M7 - WALL RAIL - W4L06087
5/8"x3 3/8"x54 1/2" (16x86x1384)
(1)
(2)
(1)
(4)
M8 - ARCHED RAIL - W4L06101
5/8"x3 3/8"x54 1/2" (16x86x1384)
M9 - WALL BOARD - W4L06148
5/8"x3 3/8"x54 1/4" (16x86x1377)
M10 - ARCHED RAIL - W4L06103
5/8"x3 3/8"x53 1/8" (16x86x1350)
M11 - ROOF RAFTER - W4L06114
5/8"x3 3/8"x43 7/8" (16x86x1114)
(1)
(1)
M12 - WALL RAIL - W4L06121
5/8"x3 3/8"x31" (16x86x788)
M13 - WALL RAIL - W4L06112
5/8"x3 3/8"x29 1/4" (16x86x744)
Parts Identification
Wood Components
(NOT TO SCALE)
(1)
(1)
M14 - WALL RAIL - W4L06113
5/8"x3 3/8"x28 5/8" (16x86x728)
(5)
M15 - FLOOR BOARD - W4L06120
5/8"x3 3/8"x29 1/8" (16x86x740)
(1)
M16 - FLOOR BOARD - W4L06130
5/8"x3 3/8"x27 3/4" (16x86x704)
(1)
M17 - WALL RAIL - W4L06094
5/8"x3 3/8"x27 1/4" (16x86x692)
(2)
M18 - WALL BOARD - W4L06108
5/8"x3 3/8"x27" (16x86x686)
(11)
M19 - WALL BOARD - W4L06096
5/8"x3 3/8"x27" (16x86x686)
M20 - ATTACHMENT BOARD - W4L06146
5/8"x3 3/8"x21 1/2" (16x86x547)
(13)
M21 - FLOOR BOARD - W4L06080
5/8"x3 3/8"x21 1/4" (16x86x540)
(1)
M22 - FLOOR BOARD - W4L06081
5/8"x3 3/8"x21 1/4" (16x86x540)
M23 - STAIR STEP BOARD - W4L06122
5/8"x3 1/4"x19" (16x83x483)
(24)
(2)
M24 - WALL RAIL - W4L06107
5/8"x3 3/8"x15 5/8" (16x86x398)
(1)
M25 - WALL RAIL - W4L06098
5/8"x3 3/8"x6 3/4" (16x86x172)
(1)
M26 - WALL RAIL - W4L06110
5/8"x3 3/8"x5 3/8" (16x86x138)
M27 - CORNER BOARD - W4L06147
5/8"x3 3/8"x50 3/8" (16x86x1280)
(2)
(1)
M28 - WALL BOARD - W4L06180
5/8"x3 3/8"x61 1/4" (16x86x1557)
(2)
N1 - FLOOR BOARD - W4L06067
5/8"x2 3/8"x54 1/2" (16x60x1384)
(2)
N2 - SUNBURST BOARD - W4L06116
5/8"x2 3/8"x24 3/8" (16x60x620)
(14)
M29 - WALL BOARD - W4L06181
5/8"x3 3/8"x28 5/8" (16x86x726)
Parts Identification
Wood Components
(NOT TO SCALE)
N3 - FLOOR BOARD - W4L06078
5/8"x2 3/8"x19 3/4" (16x60x502)
(2)
(8)
N4 - SUNBURST BOARD - W4L06118
5/8"x2 3/8"x19 5/8" (16x60x500)
(4)
N6 - SUNBURST BOARD - W4L06117
5/8"x2 3/8"x15 7/8" (16x60x404)
(22)
(1)
O70 - SLIDE MOUNTING BOARD - W102822
5/8"x1 3/8"x20 3/8" (16x34x517)
Q1 - SUPPORT BOARD - W4L06129
1"x4 3/8"x22 3/4" (24x112x579)
(1)
(1)
O1 - PICKET - W4L06135
5/8"x1 3/8"x31 1/4" (16x34x795)
SP50 - SWING BEAM SUPPORT - W4L06170
3 3/8"x3 3/8"x49 3/8" (86x86x1254)
(1)
T1 - SUPPORT BOARD - W4L06075
1"x1 3/8"x50" (24x34x1270)
(2)
T2 - SUPPORT BOARD - W4L06065
1"x1 3/8"x49 5/8" (24x34x1260)
(1)
T3 - PICKET - W4L06136
1"x1 3/8"x27 1/8" (24x34x688)
(1)
T4 - SUPPORT BOARD - W4L06077
1"x1 3/8"x23 7/8" (24x34x606)
(1)
T5 - SUPPORT BOARD - W4L06076
1"x1 3/8"x21 1/2" (24x34x546)
(1)
T6 - PICKET - W4L06137
1"x1 3/8"x19 5/8" (24x34x500)
(1)
T7 - PICKET - W4L06138
1"x1 3/8"x18 3/8" (24x34x468)
(2)
T8 - SUPPORT BOARD - W4L06119
1"x1 3/8"x16 5/8" (24x34x423)
(1)
T9 - PICKET - W4L06139
1"x1 3/8"x15 1/4" (24x34x386)
Parts Identification
Wood Components
(NOT TO SCALE)
(1)
(1)
(1)
T10 - PICKET - W4L06140
1"x1 3/8"x12" (24x34x304)
T11 - PICKET - W4L06141
1"x1 3/8"x8 3/4" (24x34x222)
E12 - UPRIGHT - W2A01864
1 3/8"x3 3/8"x57 3/8" (36x86x1457)
(2)
RP1 - ROOF PANEL - W2A01860
1 3/8"x12 1/4"x59 1/2" (35x311x1532)
(2)
RP2 - ROOF PANEL - W2A01861
1 3/8"x16 1/8"x59 1/2" (35x410x1532)
(2)
RP3 - ROOF PANEL - W2A01862
1 3/8"x16 1/8"x59 1/2" (35x410x1532)
(1)
(1)
SR1 - STAIR RAIL - W2A01863
1"x8 3/8"x82 5/8" (24x214x2099)
SR2 - STAIR RAIL - W2A01868
1"x8 3/8"x82 5/8" (24x214x2099)
Parts Identification
Hardware
(1)
(2)
- BOLT WH 5/16X6 BLK - H100363
- BOLT WH 5/16x4 3/4 BLK - H100480
(4)
- BOLT WH 1/4x5/8 BLK - H100486
(6) P - BOLT WH 5/16x3 BLK - H100416
(2)
- BOLT WH 5/16x1 BLK - H100468
(1)
- BOLT WH 5/16x3 1/4 BLK - H100484
(3) VN - BOLT WH 5/16x2-3/4 BLK - H100195
(7)
- BOLT WH 5/16x1/2 BLK - H100396
(4)
(52) VY - BOLT WH 5/16x2-1/4 BLK - H100205
(4) VZ - LAG SCREW WH 5/16x3 BLK - H100206
(4)
(4)
- BOLT WH 1/4x1 BLK - H100171
- T-NUT 1/4 BLK - H100398
(4) VQ - LAG SCREW WH 5/16x2-1/2 BLK - H100197
- BOLT WH 5/16x2 BLK - H100457
(7)
- WASHER LOCK EXT 8x15 BLK - H100400
(24) - LAG SCREW WH 5/16x2 BLK - H100458
(52) - BOLT WH 5/16x1 3/4 BLK - H100378
(2)
- NUT BARREL WH 5/16x5/8 BLK - H100469
(40) - LAG SCREW WH 5/16x1 1/2 BLK - H100471
(25) - BOLT WH 5/16x1 1/2 BLK - H100407
(13) VK - NUT BARREL WH 5/16x7/8 BLK - H100192
(4)
- BOLT WH 5/16x1 1/4 BLK - H100459
(4)
- LAG SCREW WH 1/4x2 BLK - H100487
(39) LC - LAG SCREW WH 1/4x1-1/2 BLK - H100403
(2)
- BOLT WH 1/4x1/2 BLK - H100401
(7)
- NUT BARREL WH 1/4x5/8 BLK - H100404
Parts Identification
Hardware
(2)
(2)
(2)
(2)
- T-40 TORX WRENCH - A100041
- T-40 TORX BIT - A100042
- T-30 TORX BIT - H100147
- T-30 TORX WRENCH - H100114
(13) BW - SCREW PFH 8x3 - H100092
(4)
- SCREW PWH 8x1/2 BLK - H100408
(17) BT - SCREW PFH 8x2 1/2 - H100090
(193)VR - WASHER LOCK EXT 8x19 BLK - H100198
(7) CK - SCREW PFH 8x2 - H100111
(13) CA - WASHER FLAT 11x25 - H100102
(2)
(65) BS - SCREW PFH 8x1 3/4 - H100089
- NUT LOCK 5/16 BLK - H100479
(10) VS - WASHER LOCK EXT 12x19 BLK - H100199
(207)BP - SCREW PFH 8x1 1/2 - H100086
(11) - WASHER FLAT 9x18 BLK - H100474
(134)BQ - SCREW PFH 8x1 1/4 - H100087
(13) CF - WASHER LOCK INT 10x18 - H100107
(13) BF - T-NUT 3/8 - H100073
(218)BR - SCREW PFH 8x1 1/8 - H100088
(4) CR - SCREW PFH 8x3/4 - H100121
(2)
(4)
- WASHER LOCK INT 8x15 BLK - H100473
- BOLT HEX 5/16x1 1/4 BLK - H100481
(145) - T-NUT 5/16 BLK - H100379
(2)
- BOLT HEX 5/16x2-3/4 BLK - H100472
(2) CY - SCREW PWH 8x5/8 - H100128
(9)
- WASHER FLAT 8x27 BLK - H100478
(13) AT - BOLT HEX 3/8x5 3/4 - H100056
(7)
(2)
- BOLT HEX 5/16x4 1/4 BLK - H100476
- WASHER SPLIT 5/16 BLK - H100477
(12) - WASHER LOCK EXT 6x15 BLK - H100405
Parts Identification
Accessories
(NOT TO SCALE)
(1) SQ - "A" REVISION TAG - A100314
(1) EH - LTP ID TAG (LARGE) AGES 3-10 - A100051
(6) FA - QUICK LINK - A100069
(6)
- SWING HANGER - A4M00505
(2)
(2)
(1) QU - SLIDE VF 10 FT - A100287
- SWING SEAT GREEN - A6P00054
- TRIANGLE PLATE 100° 5 HOLE - A4M00614
(1)
(2)
(1)
- SWING BEAM EXTENSION BRACKET-LEFT - A4M00617
- L BRACKET 66x66x127 - A4M00619
- TRAPEZE - A6P00034
(1)
(12) - METAL RUNG 547 - A4M00616
- SWING BEAM EXTENSION BRACKET-RIGHT - A4M00618
(8) KC - METAL GROUND STAKE BROWN - A100178
(6)
- 90° L-BRACKET - BLK - A4M00555
(2)
- L BRACKET 2.5x38x50x55 - A4M00615
(1)
- PLASTIC CURTAIN ROD - A6P00090
(15) - METAL TUBE - A4M00620
(4)
- HAND GRIP METAL BLACK 381 c/c - A4M00613
(23) - METAL TUBE - A4M00597
(2) KN - CHAIN GREEN 31" - A100177
(4) EF - CHAIN GREEN 57" - A100047
Parts Identification
Accessories
(NOT TO SCALE)
(1)
(2)
- HAMMOCK - A6P00066
- CURTAIN - A6P00089
(2)
G2 - LADDER UPRIGHT - W4L06144
1"x5 1/4"x64 1/2" (24x134x1637)
(5)
(1)
- METAL RUNG 547 - A4M00616
M20 - ATTACHMENT BOARD - W4L06146
5/8"x3 3/8"x21 1/2" (16x86x547)
LADDER ASSEMBLY
(10)
LAG SCREW
WH 1/4x1-1/2
BLK
(4)
SCREW PFH
8x1 1/2
HOLES TOWARD BOTTOM
LAG SCREW WH 1/4x1-1/2 BLK
(10 PLCS)
G2
SCREW PFH 8x1 1/2
(4 PLCS)
G2
METAL RUNG 547
(5 PLCS)
(1)
E74 - MONKEY BAR RAIL - W4L06149
1 3/8"x3 3/8"x60 5/8" (36x86x1539)
(1)
(1)
- TRIANGLE PLATE 100° 5 HOLE - A4M00614
- L BRACKET 2.5x38x50x55 - A4M00615
MONKEY BAR ASSEMBLY
STEP 1
(3)
NUT BARREL WH 5/16x7/8 BLK
(1 PLC)
(1)
WASHER LOCK EXT 12x19 BLK
(1 PLC)
L BRACKET 2.5x38x50x55
(1 PLC)
BOLT WH 5/16x1 BLK
(1 PLC)
BOLT WH
5/16x1 1/2
BLK
(1)
NUT BARREL
WH 5/16x7/8
BLK
WASHER
LOCK EXT
12x19 BLK
(1)
BOLT WH
5/16x1 BLK
(3)
T-NUT 5/16
BLK
E74
T-NUT 5/16 BLK
(3 PLCS)
BOLT WH 5/16x1 1/2 BLK
(3 PLCS)
TRIANGLE PLATE 100° 5 HOLE
(1 PLC)
(1)
E74 - MONKEY BAR RAIL - W4L06149
1 3/8"x3 3/8"x60 5/8" (36x86x1539)
(1)
(1)
- TRIANGLE PLATE 100° 5 HOLE - A4M00614
- L BRACKET 2.5x38x50x55 - A4M00615
MONKEY BAR ASSEMBLY
STEP 2
(3)
(1)
BOLT WH
5/16x1 1/2
BLK
NUT BARREL
WH 5/16x7/8
BLK
WASHER
LOCK EXT
12x19 BLK
(1)
BOLT WH
5/16x1 BLK
WASHER LOCK EXT 12x19 BLK
(1 PLC)
L BRACKET 2.5x38x50x55
(1 PLC)
BOLT WH 5/16x1 BLK
(1 PLC)
E74
T-NUT 5/16 BLK
(3 PLCS)
NUT BARREL WH 5/16x7/8 BLK
(1 PLC)
BOLT WH 5/16x1 1/2 BLK
(3 PLCS)
TRIANGLE PLATE 100° 5 HOLE
(1 PLC)
(1)
(3)
T-NUT 5/16
BLK
(1)
E79 - MONKEY BAR UPRIGHT - W4L06150
1 3/8"x3 3/8"x84 1/2" (36x86x2148)
(1)
- HAND GRIP METAL BLACK 381 c/c - A4M00613
MONKEY BAR ASSEMBLY
STEP 3
(2)
(2)
BOLT WH
5/16x1 1/2
BLK
LAG SCREW
WH 5/16x1 1/2
BLK
(2)
T-NUT 5/16
BLK
T-NUT 5/16 BLK
(2 PLCS)
BOLT WH 5/16x1 1/2 BLK
(2 PLCS)
LAG SCREW WH 5/16x1 1/2 BLK
(2 PLCS)
HAND GRIP METAL BLACK 381 c/c
(1 PLC)
E79
(1)
E79 - MONKEY BAR UPRIGHT - W4L06150
1 3/8"x3 3/8"x84 1/2" (36x86x2148)
(1)
- HAND GRIP METAL BLACK 381 c/c - A4M00613
MONKEY BAR ASSEMBLY
STEP 4
(2)
BOLT WH
5/16x1 1/2
BLK
(2)
(2)
T-NUT 5/16
BLK
LAG SCREW
WH 5/16x1 1/2
BLK
T-NUT 5/16 BLK
(2 PLCS)
BOLT WH 5/16x1 1/2 BLK
(2 PLCS)
HAND GRIP METAL BLACK 381 c/c
(1 PLC)
LAG SCREW WH 5/16x1 1/2 BLK
(2 PLCS)
E79
(7)
- METAL RUNG 547 - A4M00616
MONKEY BAR ASSEMBLY
STEP 5
(14)
LAG SCREW WH 1/4x1-1/2 BLK
(14 PLCS)
METAL RUNG 547
(7 PLCS)
1/4
LAG SCREW
WH 1/4x1-1/2
BLK
(1)
H82 - MONKEY BAR GROUND BOARD - W4L06168
1"x3 3/8"x70 3/8" (24x86x1786)
MONKEY BAR ASSEMBLY
STEP 6
(4)
LAG SCREW
WH 5/16x2-1/2
BLK
(4)
WASHER
LOCK EXT
8x19 BLK
H82
LAG SCREW WH 5/16x2-1/2 BLK
(4 PLCS)
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
(2)
H81 - MONKEY BAR BRACE - W4L06151
1"x3 3/8"x53 1/4" (24x86x1352)
MONKEY BAR ASSEMBLY
STEP 7
(2)
WASHER
LOCK INT
8x15 BLK
(2)
WASHER
FLAT 9x18
BLK
BOLT WH
5/16x1 3/4
BLK
(4)
(2)
BOLT HEX
5/16x2-3/4
BLK
(6)
(4)
T-NUT 5/16
BLK
WASHER
LOCK EXT
8x19 BLK
T-NUT 5/16 BLK
(2 PLCS)
WASHER FLAT 9x18 BLK
(2 PLCS)
WASHER LOCK INT 8x15 BLK
(2 PLCS)
BOLT HEX 5/16x2-3/4 BLK
(2 PLCS)
H81
H81
T-NUT 5/16 BLK
(4 PLCS)
BOLT WH 5/16x1 3/4 BLK
(4 PLCS)
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
(1)
A50 - SWING BEAM - W4L06169
3 3/8"x5 1/4"x89 1/2" (86x134x2274)
(1)
(2)
- SWING BEAM EXTENSION BRACKET-RIGHT - A4M00618
- L BRACKET 66x66x127 - A4M00619
(1)
- SWING BEAM EXTENSION BRACKET-LEFT - A4M00617
SWING BEAM ASSEMBLY
STEP 1
(3)
(2)
NUT BARREL
WH 5/16x7/8
BLK
WASHER
SPLIT 5/16
BLK
(2)
(3)
(2)
NUT LOCK
5/16 BLK
(4)
WASHER
FLAT 8x27
BLK
BOLT HEX 5/16x4 1/4 BLK
(2 PLCS)
WASHER SPLIT 5/16 BLK
(2 PLCS)
L BRACKET 66x66x127
(2 PLCS)
WASHER FLAT 8x27 BLK
(4 PLCS)
NUT LOCK 5/16 BLK
(2 PLCS)
A50
NUT BARREL WH 5/16x7/8 BLK
(3 PLCS)
BOLT WH 5/16x3 BLK
(3 PLCS)
SWING BEAM EXTENSION BRACKET-LEFT
(1 PLC)
SWING BEAM EXTENSION BRACKET-RIGHT
(1 PLC)
BOLT HEX
5/16x4 1/4
BLK
BOLT WH
5/16x3 BLK
(6) BY - SWING HANGER- A4M00505
SWING BEAM ASSEMBLY
STEP 2
(12)
(12)
T-NUT 3/8
(12 PLCS)
WASHER FLAT 11x25
(12 PLCS)
WASHER LOCK INT 10x18
(12 PLCS)
BOLT HEX 3/8x5 3/4
(12 PLCS)
T-NUT 3/8
BOLT HEX
3/8x5 3/4
(12)
WASHER
LOCK INT
10x18
(12)
WASHER
FLAT 11x25
(1)
SP50 - SWING BEAM SUPPORT - W4L06170
3 3/8"x3 3/8"x49 3/8" (86x86x1254)
SWING BEAM ASSEMBLY
STEP 3
(2)
(2)
BOLT WH
5/16x3 BLK
NUT BARREL
WH 5/16x7/8
BLK
NUT BARREL WH 5/16x7/8 BLK
(2 PLCS)
BOLT WH 5/16x3 BLK
(2 PLCS)
SP50
(2)
E51 - ANGLE BRACE - W4L06171
1 3/8"x3 3/8"x88 3/4" (36x86x2254)
(1)
E50 - END SUPPORT - W4L06172
1 3/8"x3 3/8"x44 1/8" (36x86x1120)
SWING BEAM ASSEMBLY
STEP 4
(1)
(1)
(5)
WASHER LOCK EXT 12x19 BLK
(1 PLC)
BOLT WH
5/16x4 3/4
BLK
(2)
WASHER
LOCK EXT
12x19 BLK
(4)
BOLT WH
5/16X6 BLK
BOLT WH
5/16x2-3/4
BLK
(2)
T-NUT 5/16
BLK
WASHER
LOCK EXT
8x19 BLK
(1)
NUT BARREL
WH 5/16x7/8
BLK
WASHER LOCK EXT 8x19 BLK
(1 PLC)
NUT BARREL WH 5/16x7/8 BLK
(1 PLC)
BOLT WH 5/16X6 BLK
(1 PLC)
T-NUT 5/16 BLK
(4 PLCS)
E51
BOLT WH 5/16x2-3/4 BLK
(2 PLCS)
E50
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
E51
BOLT WH 5/16x4 3/4 BLK
(2 PLCS)
(1)
G50 - GROUND BOARD - W4L06173
1"x5 1/4"x86 3/4" (24x134x2202)
SWING BEAM ASSEMBLY
STEP 5
(4)
T-NUT 5/16
BLK
(4)
BOLT WH
5/16x2-1/4
BLK
(4)
WASHER
LOCK EXT
8x19 BLK
T-NUT 5/16 BLK
(4 PLCS)
G50
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
BOLT WH 5/16x2-1/4 BLK
(4 PLCS)
E12 - UPRIGHT - W2A01864
1 3/8"x3 3/8"x57 3/8" (36x86x1457)
(1)
(1)
(1)
H2 - FLOOR SUPPORT - W4L06060
1"x3 3/8"x76 3/4" (24x86x1948)
E7 - UPRIGHT - W4L06051
1 3/8"x3 3/8"x57 3/8" (36x86x1457)
(1)
K12 - GROUND BOARD - W4L06185
5/8"x5 1/4"x89 1/2" (16x134x2274)
STEP 1
(2)
(6)
T-NUT 5/16
BLK
(6)
BOLT WH 5/16x2-1/4 BLK
(2 PLCS)
WASHER
LOCK EXT
8x19 BLK
(4)
BOLT WH
5/16x2-1/4
BLK
BOLT WH
5/16x1 3/4
BLK
WASHER LOCK EXT 8x19 BLK
(2 PLCS)
T-NUT 5/16 BLK
(2 PLCS)
H2
HOLES
TOWARD
BOTTOM
E7
E12
PILOT HOLES
TO OUTSIDE
PILOT HOLES
TO OUTSIDE
T-NUT 5/16 BLK
(4 PLCS)
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
BOLT WH 5/16x1 3/4 BLK
(4 PLCS)
K12
(2)
H22 - DECK BRACE - W4L06082
1"x3 3/8"x18 3/8" (24x86x466)
STEP 2
10
15
14
12
13
11
12
11
9
10
8
9
7
8
6
5
5
3
4
2
3
4
7
!
(2)
WASHER
LOCK EXT
6x15 BLK
2
1
6
T-NUT 5/16
BLK
13
(2)
20
21
19
17
18
16
12
13
14
15
11
1
2
3
4
5
6
7
8
9
10
1
22
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
T-NUT 5/16 BLK
(2 PLCS)
BOLT WH 5/16x1 3/4 BLK
(2 PLCS)
WASHER LOCK EXT 8x19 BLK
(2 PLCS)
H22
LAG SCREW WH 1/4x1-1/2 BLK
(2 PLCS)
WASHER LOCK EXT 6x15 BLK
(2 PLCS)
(2)
WASHER
LOCK EXT
8x19 BLK
(2)
(2)
BOLT WH
5/16x1 3/4
BLK
LAG SCREW
WH 1/4x1-1/2
BLK
3
2
1
(1)
(1)
K1 - GROUND BOARD - W4L06052
5/8"x5 1/4"x74 1/2" (16x134x1893)
K2 - GROUND BOARD - W4L06056
5/8"x5 1/4"x74 1/2" (16x134x1893)
STEP 3
(4)
(4)
K1
K2
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
LAG SCREW WH 5/16x1 1/2 BLK
(4 PLCS)
LAG SCREW
WH 5/16x1 1/2
BLK
WASHER
LOCK EXT
8x19 BLK
(1)
E8 - UPRIGHT - W4L06058
1 3/8"x3 3/8"x57 3/8" (36x86x1457)
(1)
(1)
K4 - GROUND BOARD - W4L06049
5/8"x5 1/4"x54 1/2" (16x134x1384)
E9 - UPRIGHT - W4L06061
1 3/8"x3 3/8"x57 3/8" (36x86x1457)
STEP 4
(4)
BOLT WH
5/16x1 3/4
BLK
(4)
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
(4)
BOLT WH 5/16x1 3/4 BLK
(4 PLCS)
T-NUT 5/16
BLK
(8)
LAG SCREW
WH 5/16x1 1/2
BLK
WASHER
LOCK EXT
8x19 BLK
E9
E8
K4
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
LAG SCREW WH 5/16x1 1/2 BLK
(4 PLCS)
T-NUT 5/16 BLK
(4 PLCS)
(1)
(1)
E2 - UPRIGHT - W4L06057
1 3/8"x3 3/8"x86 1/8" (36x86x2186)
(1)
E10 - UPRIGHT - W4L06053
1 3/8"x3 3/8"x34 1/4" (36x86x869)
E1 - UPRIGHT - W4L06055
1 3/8"x3 3/8"x86 1/8" (36x86x2186)
(1)
K5 - GROUND BOARD - W4L06054
5/8"x5 1/4"x54 1/2" (16x134x1384)
STEP 5
(6)
(6)
BOLT WH
5/16x1 3/4
BLK
T-NUT 5/16
BLK
(4)
(10)
LAG SCREW
WH 5/16x1 1/2
BLK
WASHER
LOCK EXT
8x19 BLK
NOTE HOLES
NOTE HOLES
E2
E1
E10
T-NUT 5/16 BLK
(6 PLCS)
K5
LAG SCREW WH 5/16x1 1/2 BLK
(2 PLCS)
WASHER LOCK EXT 8x19 BLK
(10 PLCS)
BOLT WH 5/16x1 3/4 BLK
(2 PLCS)
LAG SCREW WH 5/16x1 1/2 BLK
(2 PLCS)
BOLT WH 5/16x1 3/4 BLK
(4 PLCS)
(1)
H3 - FLOOR SUPPORT - W4L06083
1"x3 3/8"x76 3/4" (24x86x1948)
STEP 6
(2)
(2)
BOLT WH 5/16x2-1/4 BLK
(2 PLCS)
WASHER LOCK EXT 8x19 BLK
(2 PLCS)
T-NUT 5/16 BLK
(2 PLCS)
H3
NOTE HOLE
T-NUT 5/16
BLK
BOLT WH
5/16x2-1/4
BLK
(2)
WASHER
LOCK EXT
8x19 BLK
(1)
H22 - DECK BRACE - W4L06082
1"x3 3/8"x18 3/8" (24x86x466)
STEP 7
(1)
(1)
LAG SCREW
WH 1/4x1-1/2
BLK
WASHER
LOCK EXT
6x15 BLK
(1)
(1)
T-NUT 5/16
BLK
(1)
T-NUT 5/16 BLK
(1 PLC)
WASHER LOCK EXT 8x19 BLK
(1 PLC)
BOLT WH 5/16x1 3/4 BLK
(1 PLC)
H22
LAG SCREW WH 1/4x1-1/2 BLK
(1 PLC)
WASHER LOCK EXT 6x15 BLK
(1 PLC)
BOLT WH
5/16x1 3/4
BLK
WASHER
LOCK EXT
8x19 BLK
H10 - FLOOR SUPPORT - W4L06062
1"x3 3/8"x52 1/2" (24x86x1334)
(1)
(4)
(1)
H23 - DECK BRACE - W4L06179
1"x3 3/8"x17 7/8" (24x86x453)
H4 - FLOOR SUPPORT - W4L06063
1"x3 3/8"x74 7/8" (24x86x1901)
STEP 8
LAG SCREW
WH 1/4x1-1/2
BLK
(4)
4
2
5
3
6
4
7
5
8
6
9
7
10
8
!
(2)
BOLT WH
5/16x2-1/4
BLK
(4)
BOLT WH
5/16x1 3/4
BLK
(10)
WASHER
LOCK EXT
8x19 BLK
(4)
LAG SCREW
WH 5/16x2
BLK
2
3
1
T-NUT 5/16
BLK
WASHER
LOCK EXT
6x15 BLK
11
9
12
10
13
11
14
12
15
13
(4)
(6)
22
21
16
17
18
20
19
18
16
12
13
14
15
17
15
14
11
13
11
10
9
8
7
6
5
1
2
3
4
5
6
7
8
9
10
12
4
3
2
1
1
23
19
20
21
22
T-NUT 5/16 BLK
(6 PLCS)
LAG SCREW WH 5/16x2 BLK
(2 PLCS)
BOLT WH 5/16x1 3/4 BLK
(4 PLCS)
BOLT WH 5/16x2-1/4 BLK
(2 PLCS)
WASHER LOCK EXT 8x19 BLK
(10 PLCS)
LAG SCREW WH 5/16x2 BLK
(2 PLCS)
H23
H4
H23
H10
H23
H23
LAG SCREW WH 1/4x1-1/2 BLK
(4 PLCS)
WASHER LOCK EXT 6x15 BLK
(4 PLCS)
(1)
K9 - ARCHED RAIL - W4L06124
5/8"x5 1/4"x29 3/4" (16x134x756)
(1)
M12 - WALL RAIL - W4L06121
5/8"x3 3/8"x31" (16x86x788)
STEP 9
(2)
LAG SCREW WH 5/16x1 1/2 BLK
(3 PLCS)
BOLT WH 5/16x1 3/4 BLK
(2 PLCS)
K9
WASHER LOCK EXT 8x19 BLK
(5 PLCS)
T-NUT 5/16 BLK
(2 PLCS)
FLUSH
M12
HOLES TOWARD BOTTOM
(5)
T-NUT 5/16
BLK
WASHER
LOCK EXT
8x19 BLK
(3)
(2)
LAG SCREW
WH 5/16x1 1/2
BLK
BOLT WH
5/16x1 3/4
BLK
(2)
J2 - FLOOR JOIST - W4L06068
1"x2 3/8"x52 1/2" (24x60x1334)
(1) SQ - "A" REVISION TAG - A100314
J8 - FLOOR JOIST - W4L06134
(1)
1"x2 3/8"x20 3/8" (24x60x519)
STEP 10
(12)
(2)
SCREW PFH
8x2 1/2
SCREW PWH
8x5/8
5/8
SCREW PFH 8x2 1/2
(12 PLCS)
J8
J2
"A" REVISION TAG
(1 PLC)
SCREW PWH 8x5/8
(2 PLCS)
(1)
E4 - UPRIGHT - W4L06085
1 3/8"x3 3/8"x63" (36x86x1600)
(1)
E3 - UPRIGHT - W4L06069
1 3/8"x3 3/8"x63" (36x86x1600)
(1)
E6 - UPRIGHT - W4L06091
1 3/8"x3 3/8"x63" (36x86x1600)
(1)
E5 - UPRIGHT - W4L06090
1 3/8"x3 3/8"x63" (36x86x1600)
STEP 11
(4)
(8)
T-NUT 5/16
BLK
WASHER
LOCK EXT
8x19 BLK
(4)
(4)
LAG SCREW
WH 5/16x2
BLK
BOLT WH
5/16x2-1/4
BLK
E5
E4
E6
E3
T-NUT 5/16 BLK
(4 PLCS)
WASHER LOCK EXT 8x19 BLK
(8 PLCS)
LAG SCREW WH 5/16x2 BLK
(4 PLCS)
BOLT WH 5/16x2-1/4 BLK
(4 PLCS)
(1)
T2 - SUPPORT BOARD - W4L06065
1"x1 3/8"x49 5/8" (24x34x1260)
STEP 12
(5)
SCREW PFH
8x1 3/4
T2
DOWN 5/8"
SCREW PFH 8x1 3/4
(5 PLCS)
(1)
T2 - SUPPORT BOARD - W4L06065
1"x1 3/8"x49 5/8" (24x34x1260)
(2)
M27 - CORNER BOARD - W4L06147
5/8"x3 3/8"x50 3/8" (16x86x1280)
STEP 13
(5)
SCREW PFH
8x1 3/4
(6)
SCREW PFH
8x1 1/2
DOWN 5/8"
SCREW PFH 8x1 3/4
(5 PLCS)
T2
M27
M27
SCREW PFH 8x1 1/2
(6 PLCS)
(1)
T1 - SUPPORT BOARD - W4L06075
1"x1 3/8"x50" (24x34x1270)
STEP 14
(5)
SCREW PFH
8x1 3/4
DOWN 5/8"
T1
SCREW PFH 8x1 3/4
(5 PLCS)
(2)
N1 - FLOOR BOARD - W4L06067
5/8"x2 3/8"x54 1/2" (16x60x1384)
(14)
M6 - FLOOR BOARD - W4L06066
5/8"x3 3/8"x54 1/2" (16x86x1384)
STEP 15
(92)
SCREW PFH
8x1 1/2
M6 14 PLCS
N1
N1
SCREW PFH 8x1 1/2
(92 PLCS)
(1)
F4 - POST - W4L06093
1 3/8"x2 3/8"x30 3/8" (36x60x772)
(1)
F2 - POST - W4L06070
1 3/8"x2 3/8"x30 3/8" (36x60x772)
(1)
H8 - FLOOR SUPPORT - W4L06079
1"x3 3/8"x54 3/8" (24x86x1382)
STEP 16
(2)
LAG SCREW
WH 5/16x2
BLK
(4)
BOLT WH
5/16x2-1/4
BLK
(4)
(6)
F2
WASHER
LOCK EXT
8x19 BLK
T-NUT 5/16
BLK
T-NUT 5/16 BLK
(4 PLCS)
F4
H8
CLOSER TO
LEFT SIDE
BOLT WH 5/16x2-1/4 BLK
(4 PLCS)
WASHER LOCK EXT 8x19 BLK
(6 PLCS)
LAG SCREW WH 5/16x2 BLK
(2 PLCS)
(1)
F3 - POST - W4L06074
1 3/8"x2 3/8"x30 3/8" (36x60x772)
STEP 17
BOLT WH
5/16x2-1/4
BLK
(2)
(2)
(2)
F3
T-NUT 5/16
BLK
WASHER
LOCK EXT
8x19 BLK
T-NUT 5/16 BLK
(2 PLCS)
BOLT WH 5/16x2-1/4 BLK
(2 PLCS)
WASHER LOCK EXT 8x19 BLK
(2 PLCS)
(1)
T4 - SUPPORT BOARD - W4L06077
1"x1 3/8"x23 7/8" (24x34x606)
(1)
STEP 18
FLUSH
(3)
T5 - SUPPORT BOARD - W4L06076
1"x1 3/8"x21 1/2" (24x34x546)
J9 - SUPPORT BOARD - W4L06064
1"x2 3/8"x3" (24x60x76)
SCREW PFH 8x1 3/4
(6 PLCS)
SCREW PFH 8x2
(2 PLCS)
J9
T5
T4
DOWN 5/8"
J9
FLUSH
J9
SCREW PFH 8x1 3/4
(4 PLCS)
(10)
SCREW PFH
8x1 3/4
(2)
SCREW PFH
8x2
(7)
M21 - FLOOR BOARD - W4L06080
5/8"x3 3/8"x21 1/4" (16x86x540)
(1)
N3 - FLOOR BOARD - W4L06078
5/8"x2 3/8"x19 3/4" (16x60x502)
(1)
M22 - FLOOR BOARD - W4L06081
5/8"x3 3/8"x21 1/4" (16x86x540)
STEP 19
(34)
SCREW PFH
8x1 1/2
SCREW PFH 8x1 1/2
(34 PLCS)
N3
M22
7 PLCS M21
(6)
M21 - FLOOR BOARD - W4L06080
5/8"x3 3/8"x21 1/4" (16x86x540)
(1)
N3 - FLOOR BOARD - W4L06078
5/8"x2 3/8"x19 3/4" (16x60x502)
STEP 20
(26)
SCREW PFH
8x1 1/2
SCREW PFH 8x1 1/2
(26 PLCS)
M21 6 PLCS
N3
(2)
H86 - ANGLE BRACE - W4L06186
1"x3 3/8"x49 3/8" (24x86x1254)
(2)
J9 - SUPPORT BOARD - W4L06064
1"x2 3/8"x3" (24x60x76)
(1)
T8 - SUPPORT BOARD - W4L06119
1"x1 3/8"x16 5/8" (24x34x423)
STEP 21
SCREW PFH 8x1 3/4
(3 PLCS)
SCREW PFH 8x2
(4 PLCS)
J9
(4)
SCREW PFH
8x2
(3)
SCREW PFH
8x1 3/4
(4)
DOWN 5/8"
'J9' & 'T8' FLUSH
(2)
LAG SCREW
WH 1/4x2 BLK
(2)
WASHER
LOCK EXT
6x15 BLK
(4)
WASHER
LOCK EXT
8x19 BLK
J9
T8
BOLT WH
5/16x1 1/2
BLK
(4)
T-NUT 5/16
BLK
H86
T-NUT 5/16 BLK
(4 PLCS)
H86
LAG SCREW WH 1/4x2 BLK
(2 PLCS)
WASHER LOCK EXT 6x15 BLK
(2 PLCS)
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
BOLT WH 5/16x1 1/2 BLK
(4 PLCS)
(1)
E11 - UPRIGHT - W4L06127
1 3/8"x3 3/8"x10 7/8" (36x86x275)
STEP 22
BOLT WH 5/16x2-1/4 BLK
(1 PLC)
(1)
(1)
WASHER LOCK EXT 8x19 BLK
(1 PLC)
T-NUT 5/16 BLK
(1 PLC)
E11
WASHER
LOCK EXT
8x19 BLK
(1)
T-NUT 5/16
BLK
BOLT WH
5/16x2-1/4
BLK
(1)
H12 - FLOOR SUPPORT - W4L06125
1"x3 3/8"x20 3/8" (24x86x519)
STEP 23
(2)
(1)
WASHER
LOCK EXT
8x19 BLK
SCREW PFH
8x2 1/2
(1)
LAG SCREW
WH 5/16x2
BLK
H12
SCREW PFH 8x2 1/2
(2 PLCS)
LAG SCREW WH 5/16x2 BLK
(1 PLC)
WASHER LOCK EXT 8x19 BLK
(1 PLC)
(1)
L1 - SUPPORT BOARD - W4L06128
5/8"x3 5/8"x22 3/4" (16x92x579)
(1)
Q1 - SUPPORT BOARD - W4L06129
1"x4 3/8"x22 3/4" (24x112x579)
STEP 24
(2)
LAG SCREW WH 5/16x1 1/2 BLK
(2 PLCS)
(4)
LAG SCREW
WH 5/16x2
BLK
WASHER
LOCK EXT
8x19 BLK
(2)
L1
Q1
LAG SCREW WH 5/16x2 BLK
(2 PLCS)
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
LAG SCREW
WH 5/16x1 1/2
BLK
(1)
T8 - SUPPORT BOARD - W4L06119
1"x1 3/8"x16 5/8" (24x34x423)
STEP 25
(3)
T8
SCREW PFH 8x1 3/4
(3 PLCS)
DOWN 5/8"
SCREW PFH
8x1 3/4
(5)
M15 - FLOOR BOARD - W4L06120
5/8"x3 3/8"x29 1/8" (16x86x740)
(1)
M16 - FLOOR BOARD - W4L06130
5/8"x3 3/8"x27 3/4" (16x86x704)
STEP 26
(29)
M16
SCREW PFH 8x1 1/2
(29 PLCS)
5 PLCS M15
SCREW PFH
8x1 1/2
(1)
SR1 - STAIR RAIL - W2A01863
1"x8 3/8"x82 5/8" (24x214x2099)
STEP 27
(1)
WASHER
LOCK EXT
6x15 BLK
(1)
LAG SCREW
WH 1/4x2 BLK
(1)
BOLT WH
5/16x2-1/4
BLK
(1)
LAG SCREW WH 1/4x2 BLK
(1 PLC)
WASHER LOCK EXT 6x15 BLK
(1 PLC)
(1)
WASHER
LOCK EXT
8x19 BLK
T-NUT 5/16
BLK
T-NUT 5/16 BLK
(1 PLC)
SR1
WASHER LOCK EXT 8x19 BLK
(1 PLC)
BOLT WH 5/16x2-1/4 BLK
(1 PLC)
(1)
H13 - WALL SPACER - W4L06126
1"x3 3/8"x3 3/8" (24x86x86)
(1)
SR2 - STAIR RAIL - W2A01868
1"x8 3/8"x82 5/8" (24x214x2099)
STEP 28
BOLT WH 5/16x3 1/4 BLK
(1 PLC)
(1)
WASHER LOCK EXT 8x19 BLK
(1 PLC)
BOLT WH
5/16x3 1/4
BLK
(1)
(1)
WASHER
LOCK EXT
6x15 BLK
T-NUT 5/16
BLK
(1)
(1)
T-NUT 5/16 BLK
(1 PLC)
SR2
WASHER LOCK EXT 6x15 BLK
(1 PLC)
LAG SCREW WH 1/4x2 BLK
(1 PLC)
SR2
LAG SCREW
WH 1/4x2 BLK
WASHER
LOCK EXT
8x19 BLK
(2)
F1 - UPRIGHT - W4L06131
1 3/8"x2 3/8"x34 7/8" (36x60x887)
STEP 29
(4)
BOLT WH
5/16x2 BLK
(4)
NUT BARREL
WH 5/16x7/8
BLK
WASHER
LOCK EXT
8x19 BLK
(4)
(4)
WASHER
LOCK EXT
12x19 BLK
F1
BOLT WH 5/16x2 BLK
(4 PLCS)
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
NUT BARREL WH 5/16x7/8 BLK
(4 PLCS)
WASHER LOCK EXT 12x19 BLK
(4 PLCS)
(1)
H1 - HANDRAIL - W4L06132
1"x3 3/8"x88 3/4" (24x86x2253)
STEP 30
BOLT WH
5/16x2-3/4
BLK
(1)
BOLT WH 5/16x2-3/4 BLK
(1 PLC)
BOLT WH
5/16x2-1/4
BLK
(1)
(2)
(2)
WASHER
LOCK EXT
8x19 BLK
T-NUT 5/16
BLK
H1
T-NUT 5/16 BLK
(2 PLCS)
WASHER LOCK EXT 8x19 BLK
(2 PLCS)
BOLT WH 5/16x2-1/4 BLK
(1 PLC)
(1)
H11 - HANDRAIL - W4L06133
1"x3 3/8"x46" (24x86x1170)
STEP 31
LAG SCREW WH 5/16x2 BLK
(1 PLC)
(1)
(1)
(2)
(1)
BOLT WH
5/16x2-1/4
BLK
LAG SCREW
WH 5/16x2
BLK
WASHER
LOCK EXT
8x19 BLK
T-NUT 5/16
BLK
BOLT WH 5/16x2-1/4 BLK
(1 PLC)
WASHER LOCK EXT 8x19 BLK
(2 PLCS)
T-NUT 5/16 BLK
(1 PLC)
(1)
K10 - STAIR STEP BOARD - W4L06123
5/8"x4 5/8"x19" (16x119x483)
(3)
M23 - STAIR STEP BOARD - W4L06122
5/8"x3 1/4"x19" (16x83x483)
STEP 32
(10)
SCREW PFH
8x1 1/4
SCREW PFH 8x1 1/4
(10 PLCS)
K10
M23
M23
(2)
M23 - STAIR STEP BOARD - W4L06122
5/8"x3 1/4"x19" (16x83x483)
STEP 33
(4)
SCREW PFH
8x1 1/4
SCREW PFH 8x1 1/4
(4 PLCS)
M23
(7)
K10 - STAIR STEP BOARD - W4L06123
5/8"x4 5/8"x19" (16x119x483)
(19)
M23 - STAIR STEP BOARD - W4L06122
5/8"x3 1/4"x19" (16x83x483)
STEP 34
(66)
SCREW PFH
8x1 1/4
K10 7 PLCS
M23 19 PLCS
SCREW PFH 8x1 1/4
(66 PLCS)
(1)
K6 - ARCHED RAIL - W4L06084
5/8"x5 1/4"x54 1/8" (16x134x1374)
STEP 35
(6)
(6)
(6)
BOLT WH
5/16x1 3/4
BLK
WASHER
LOCK EXT
8x19 BLK
T-NUT 5/16
BLK
T-NUT 5/16 BLK
(6 PLCS)
WASHER LOCK EXT 8x19 BLK
(6 PLCS)
BOLT WH 5/16x1 3/4 BLK
(6 PLCS)
K6
(1)
K8 - WALL RAIL - W4L06095
5/8"x5 1/4"x49 1/2" (16x134x1256)
STEP 36
(2)
BOLT WH 5/16x1 3/4 BLK
(2 PLCS)
T-NUT 5/16 BLK
(2 PLCS)
WASHER
LOCK EXT
8x19 BLK
(4)
(2)
BOLT WH
5/16x1 3/4
BLK
T-NUT 5/16
BLK
(2)
LAG SCREW
WH 5/16x1 1/2
BLK
K8
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
LAG SCREW WH 5/16x1 1/2 BLK
(2 PLCS)
(1)
G1 - WALL RAIL - W4L06086
1"x5 1/4"x76 3/4" (24x134x1948)
STEP 37
(4)
(6)
T-NUT 5/16 BLK
(6 PLCS)
(6)
(2)
BOLT WH
5/16x2-1/4
BLK
WASHER
LOCK EXT
8x19 BLK
T-NUT 5/16
BLK
LAG SCREW
WH 5/16x2
BLK
BOLT WH 5/16x2-1/4 BLK
(4 PLCS)
WASHER LOCK EXT 8x19 BLK
(6 PLCS)
G1
LAG SCREW WH 5/16x2 BLK
(2 PLCS)
(1)
K3 - ARCHED RAIL - W4L06106
5/8"x5 1/4"x74 7/8" (16x134x1901)
STEP 38
BOLT WH
5/16x1 3/4
BLK
(2)
K3
WASHER
LOCK EXT
8x19 BLK
(6)
(2)
T-NUT 5/16
BLK
(4)
LAG SCREW
WH 5/16x1 1/2
BLK
T-NUT 5/16 BLK
(2 PLCS)
BOLT WH 5/16x1 3/4 BLK
(2 PLCS)
WASHER LOCK EXT 8x19 BLK
(6 PLCS)
LAG SCREW WH 5/16x1 1/2 BLK
(4 PLCS)
(1)
H7 - WALL RAIL - W4L06100
1"x3 3/8"x54 1/2" (24x86x1384)
(1)
M8 - ARCHED RAIL - W4L06101
5/8"x3 3/8"x54 1/2" (16x86x1384)
STEP 39
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
BOLT WH 5/16x2-1/4 BLK
(2 PLCS)
T-NUT 5/16 BLK
(4 PLCS)
(4)
H7
BOLT WH 5/16x1 3/4 BLK
(2 PLCS)
LONG EDGE
(4)
M8
BOLT WH
5/16x1 3/4
BLK
(2)
WASHER
LOCK EXT
8x19 BLK
T-NUT 5/16
BLK
(2)
SHORT EDGE
BOLT WH
5/16x2-1/4
BLK
(1)
H7 - WALL RAIL - W4L06100
1"x3 3/8"x54 1/2" (24x86x1384)
STEP 40
BOLT WH 5/16x2-1/4 BLK
(2 PLCS)
(2)
WASHER LOCK EXT 8x19 BLK
(2 PLCS)
(2)
T-NUT 5/16 BLK
(2 PLCS)
(2)
H7
BOLT WH
5/16x2-1/4
BLK
WASHER
LOCK EXT
8x19 BLK
T-NUT 5/16
BLK
(1)
K7 - ARCHED RAIL - W4L06105
5/8"x5 1/4"x52 1/2" (16x134x1334)
(1)
M10 - ARCHED RAIL - W4L06103
5/8"x3 3/8"x53 1/8" (16x86x1350)
STEP 41
(6)
(6)
LAG SCREW
WH 5/16x1 1/2
BLK
WASHER
LOCK EXT
8x19 BLK
WASHER LOCK EXT 8x19 BLK
(6 PLCS)
LAG SCREW WH 5/16x1 1/2 BLK
(6 PLCS)
K7
M10
SHORT EDGE
LONG EDGE
(4)
M11 - ROOF RAFTER - W4L06114
5/8"x3 3/8"x43 7/8" (16x86x1114)
(2)
H9 - WALL RAIL - W4L06102
1"x3 3/8"x54 3/8" (24x86x1382)
STEP 42
(2)
SCREW PFH
8x2 1/2
(4)
WASHER
LOCK EXT
8x19 BLK
(4)
LAG SCREW
WH 5/16x3
BLK
SCREW PFH 8x2 1/2
(2 PLCS)
M11 4 PLCS
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
LAG SCREW WH 5/16x3 BLK
(4 PLCS)
H9
H9
(1)
RP1 - ROOF PANEL - W2A01860
1 3/8"x12 1/4"x59 1/2" (35x311x1532)
(1)
(1)
RP2 - ROOF PANEL - W2A01861
1 3/8"x16 1/8"x59 1/2" (35x410x1532)
RP3 - ROOF PANEL - W2A01862
1 3/8"x16 1/8"x59 1/2" (35x410x1532)
STEP 43
(12)
SCREW PFH
8x1 3/4
SCREW PFH 8x1 3/4
(12 PLCS)
RP1
RP2
RP3
(1)
RP1 - ROOF PANEL - W2A01860
1 3/8"x12 1/4"x59 1/2" (35x311x1532)
(1)
RP2 - ROOF PANEL - W2A01861
1 3/8"x16 1/8"x59 1/2" (35x410x1532)
(2)
(1)
- 90° L-BRACKET - BLK - A4M00555
RP3 - ROOF PANEL - W2A01862
1 3/8"x16 1/8"x59 1/2" (35x410x1532)
STEP 44
RP1
(12)
SCREW PFH
8x1 3/4
(4)
SCREW PWH
8x1/2 BLK
SCREW PFH 8x1 3/4
(12 PLCS)
RP2
RP3
90° L-BRACKET - BLK
(2 PLCS)
SCREW PWH 8x1/2 BLK
(4 PLCS)
(1)
(4)
K11 - HALF MOON PLATE - W4L06115
5/8"x5 1/4"x12 5/8" (16x134x320)
(2)
N6 - SUNBURST BOARD - W4L06117
5/8"x2 3/8"x15 7/8" (16x60x404)
(1)
N2 - SUNBURST BOARD - W4L06116
5/8"x2 3/8"x24 3/8" (16x60x620)
N4 - SUNBURST BOARD - W4L06118
5/8"x2 3/8"x19 5/8" (16x60x500)
STEP 45
(16)
SCREW PFH
8x1 1/8
(2)
SCREW PFH
8x1 1/2
1 1/4"
K11
SCREW PFH 8x1 1/8
(16 PLCS)
N2
N4
N6
N4
N6
N4
SCREW PFH 8x1 1/2
(2 PLCS)
N4
(1)
(4)
K11 - HALF MOON PLATE - W4L06115
5/8"x5 1/4"x12 5/8" (16x134x320)
(2)
N6 - SUNBURST BOARD - W4L06117
5/8"x2 3/8"x15 7/8" (16x60x404)
(1)
N2 - SUNBURST BOARD - W4L06116
5/8"x2 3/8"x24 3/8" (16x60x620)
N4 - SUNBURST BOARD - W4L06118
5/8"x2 3/8"x19 5/8" (16x60x500)
STEP 46
(16)
SCREW PFH
8x1 1/8
(2)
SCREW PFH
8x1 1/2
N4
N2
SCREW PFH 8x1 1/8
(16 PLCS)
N4
N6
N6
N4
K11
SCREW PFH 8x1 1/2
(2 PLCS)
N4
(1)
M28 - WALL BOARD - W4L06180
5/8"x3 3/8"x61 1/4" (16x86x1557)
(1)
(1)
M17 - WALL RAIL - W4L06094
5/8"x3 3/8"x27 1/4" (16x86x692)
- 90° L-BRACKET - BLK - A4M00555
STEP 47
WASHER
LOCK EXT
8x15 BLK
(1)
(1)
NUT BARREL
WH 1/4x5/8
BLK
(1)
T-NUT 1/4
BLK
(1)
(1)
BOLT WH
1/4x1 BLK
BOLT WH
1/4x5/8 BLK
(1)
(1)
T-NUT 5/16
BLK
WASHER
LOCK EXT
8x19 BLK
(1)
BOLT WH
5/16x1 3/4
BLK
(6)
SCREW PFH
8x1 1/8
WASHER LOCK EXT 8x19 BLK
(1 PLC)
NUT BARREL WH 1/4x5/8 BLK
(1 PLC)
WASHER LOCK EXT 8x15 BLK
(1 PLC)
BOLT WH 1/4x5/8 BLK
(1 PLC)
DRILL 5/16" DIA
THROUGH
FLOOR
BOLT WH 5/16x1 3/4 BLK
(1 PLC)
BOLT WH 1/4x1 BLK
(1 PLC)
T-NUT 1/4 BLK
(1 PLC)
SCREW PFH 8x1 1/8
(6 PLCS)
T-NUT 5/16 BLK
(1 PLC)
90° L-BRACKET - BLK
(1 PLC)
M28
M17
(1)
M13 - WALL RAIL - W4L06112
5/8"x3 3/8"x29 1/4" (16x86x744)
(1)
M26 - WALL RAIL - W4L06110
5/8"x3 3/8"x5 3/8" (16x86x138)
(1)
M7 - WALL RAIL - W4L06087
5/8"x3 3/8"x54 1/2" (16x86x1384)
STEP 48
(2)
(4)
T-NUT 5/16
BLK
WASHER
LOCK EXT
8x19 BLK
(2)
BOLT WH
5/16x1 3/4
BLK
(2)
LAG SCREW
WH 5/16x1 1/2
BLK
M13
M26
M7
FLUSH
LAG SCREW WH 5/16x1 1/2 BLK
(2 PLCS)
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
BOLT WH 5/16x1 3/4 BLK
(2 PLCS)
T-NUT 5/16 BLK
(2 PLCS)
(1)
M14 - WALL RAIL - W4L06113
- 90° L-BRACKET - BLK - A4M00555 (1) 5/8"x3 3/8"x28 5/8" (16x86x728)
(1)
H83 - WALL BOARD - W4L06182
1"x3 3/8"x61 1/4" (24x86x1557)
(1)
M2 - WALL BOARD - W4L06097
5/8"x3 3/8"x61 1/4" (16x86x1557)
(1)
M5 - WALL BOARD - W4L06111
5/8"x3 3/8"x61 1/4" (16x86x1557)
STEP 49
(3)
BOLT WH
5/16x1 1/2
BLK
(2)
(1)
BOLT WH
5/16x1 3/4
BLK
(1)
(1)
WASHER
LOCK EXT
8x15 BLK
NUT BARREL
WH 1/4x5/8
BLK
(1)
(1)
BOLT WH
1/4x1 BLK
T-NUT 1/4
BLK
(1)
SCREW PFH
8x3
T-NUT 5/16
BLK
(4)
(10)
SCREW PFH
8x1 1/8
BOLT WH
1/4x5/8 BLK
(5)
(1)
WASHER
LOCK EXT
8x19 BLK
(1)
LAG SCREW
WH 5/16x1 1/2
BLK
BOLT WH
5/16x1 1/4
BLK
M2
BOLT WH 5/16x1 3/4 BLK
(1 PLC)
SCREW PFH 8x3
(3 PLCS)
M14
M5
WASHER LOCK EXT 8x19 BLK
(5 PLCS)
SCREW PFH 8x1 1/8
(10 PLCS)
LAG SCREW WH 5/16x1 1/2 BLK
(1 PLC)
T-NUT 5/16 BLK
(4 PLCS)
BOLT WH 5/16x1 1/2 BLK
(2 PLCS)
BOLT WH 1/4x5/8 BLK
(1 PLC)
DRILL 5/16"
HOLE THROUGH
FLOOR
H83
BOLT WH 5/16x1 1/4 BLK
(1 PLC)
NUT BARREL WH 1/4x5/8 BLK
(1 PLC)
WASHER LOCK EXT 8x15 BLK
(1 PLC)
BOLT WH 1/4x1 BLK
(1 PLC)
90° L-BRACKET - BLK
(1 PLC)
T-NUT 1/4 BLK
(1 PLC)
(2)
M24 - WALL RAIL - W4L06107
5/8"x3 3/8"x15 5/8" (16x86x398)
(1)
M25 - WALL RAIL - W4L06098
5/8"x3 3/8"x6 3/4" (16x86x172)
STEP 50
(1)
(3)
T-NUT 5/16
BLK
WASHER
LOCK EXT
8x19 BLK
M25
T-NUT 5/16 BLK
(1 PLC)
M24
HOLES
TOWARD
BOTTOM
LAG SCREW WH 5/16x1 1/2 BLK
(2 PLCS)
BOLT WH 5/16x1 3/4 BLK
(1 PLC)
WASHER LOCK EXT 8x19 BLK
(3 PLCS)
(2)
LAG SCREW
WH 5/16x1 1/2
BLK
(1)
BOLT WH
5/16x1 3/4
BLK
(1)
H84 - WALL BOARD - W4L06183
1"x3 3/8"x61 1/4" (24x86x1557)
(1)
M3 - WALL BOARD - W4L06099
5/8"x3 3/8"x61 1/4" (16x86x1557)
STEP 51
SCREW PFH
8x1 1/8
(4)
BOLT WH 5/16x1 3/4 BLK
(1 PLC)
WASHER LOCK EXT 8x19 BLK
(2 PLCS)
T-NUT 5/16 BLK
(2 PLCS)
(2)
SCREW PFH 8x3
(3 PLCS)
(1)
BOLT WH
5/16x1 3/4
BLK
(1)
BOLT WH
5/16x1 1/2
BLK
WASHER
LOCK EXT
8x19 BLK
(2)
(3)
H84
T-NUT 5/16
BLK
SCREW PFH
8x3
M3
BOLT WH 5/16x1 1/2 BLK
(1 PLC)
SCREW PFH 8x1 1/8
(4 PLCS)
(2)
- 90° L-BRACKET - BLK - A4M00555
(2)
(2)
- HAND GRIP METAL BLACK 381 c/c - A4M00613
M18 - WALL BOARD - W4L06108
5/8"x3 3/8"x27" (16x86x686)
STEP 52
NUT BARREL
WH 1/4x5/8
(2)
BLK
(2)
WASHER
LOCK EXT
8x15 BLK
(4)
T-NUT 5/16
BLK
(4)
(2)
BOLT WH
5/16x1/2 BLK
(4)
(2)
T-NUT 1/4
BLK
SCREW PFH
8x1 1/8
(2)
BOLT WH
1/4x1 BLK
BOLT WH
1/4x5/8 BLK
HAND GRIP METAL BLACK 381 c/c
(2 PLCS)
BOLT WH 5/16x1/2 BLK
(4 PLCS)
WASHER LOCK EXT 8x15 BLK
(2 PLCS)
T-NUT 1/4 BLK
(2 PLCS)
NUT BARREL WH 1/4x5/8 BLK
(2 PLCS)
SCREW PFH 8x1 1/8
(4 PLCS)
T-NUT 5/16 BLK
(4 PLCS)
M18
BOLT WH 1/4x5/8 BLK
(2 PLCS)
DRILL 5/16" HOLE
THROUGH FLOOR
BOLT WH 1/4x1 BLK
(2 PLCS)
90° L-BRACKET - BLK
(2 PLCS)
M18
(2)
M9 - WALL BOARD - W4L06148
5/8"x3 3/8"x54 1/4" (16x86x1377)
STEP 53
(12)
SCREW PFH
8x1 1/8
SCREW PFH 8x1 1/8
(12 PLCS)
M9
M9
(2)
H83 - WALL BOARD - W4L06182
1"x3 3/8"x61 1/4" (24x86x1557)
(2)
M4 - WALL BOARD - W4L06109
5/8"x3 3/8"x61 1/4" (16x86x1557)
STEP 54
(12)
SCREW PFH
8x1 1/8
(2)
BOLT WH
5/16x1 3/4
BLK
T-NUT 5/16 BLK
(6 PLCS)
M4
H83
WASHER LOCK EXT 8x19 BLK
(6 PLCS)
BOLT WH 5/16x1 3/4 BLK
(2 PLCS)
(4)
(6)
BOLT WH
5/16x1 1/2
BLK
WASHER
LOCK EXT
8x19 BLK
M4
H83
(6)
T-NUT 5/16
BLK
(6)
SCREW PFH
8x3
SCREW PFH 8x3
(6 PLCS)
BOLT WH 5/16x1 1/2 BLK
(4 PLCS)
SCREW PFH 8x1 1/8
(12 PLCS)
(5)
M19 - WALL BOARD - W4L06096
5/8"x3 3/8"x27" (16x86x686)
STEP 55
(20)
M19
SCREW PFH
8x1 1/8
(14)
M29 - WALL BOARD - W4L06181
5/8"x3 3/8"x28 5/8" (16x86x726)
STEP 56
(56)
SCREW PFH
8x1 1/8
M29 14 PLCS
SCREW PFH 8x1 1/8
(56 PLCS)
(6)
M19 - WALL BOARD - W4L06096
5/8"x3 3/8"x27" (16x86x686)
STEP 57
(24)
SCREW PFH
8x1 1/8
M19 6 PLCS
SCREW PFH 8x1 1/8
(24 PLCS)
(1)
J7 - WALL RAIL - W4L06050
1"x2 3/8"x22 3/4" (24x60x579)
(2)
J6 - WALL RAIL - W4L06089
1"x2 3/8"x25 5/8" (24x60x650)
J3 - WALL RAIL - W4L06092
1"x2 3/8"x27 1/4" (24x60x691)
(1)
STEP 58
T-NUT 5/16
BLK
(5)
(8)
BOLT WH 5/16x2-1/4 BLK
(1 PLC)
LAG SCREW WH 5/16x2 BLK
(1 PLC)
J6
WASHER
LOCK EXT
8x19 BLK
(3)
(5)
LAG SCREW
WH 5/16x2
BLK
BOLT WH
5/16x2-1/4
BLK
BOLT WH 5/16x2-1/4 BLK
(1 PLC)
T-NUT 5/16 BLK
(5 PLCS)
J7
J6
J3
BOLT WH 5/16x2-1/4 BLK
(1 PLC)
LAG SCREW WH 5/16x2 BLK
(1 PLC)
WASHER LOCK EXT 8x19 BLK
(8 PLCS)
LAG SCREW WH 5/16x2 BLK
(1 PLC)
BOLT WH 5/16x2-1/4 BLK
(2 PLCS)
(23) - METAL TUBE - A4M00597
STEP 59
METAL TUBE
(23 PLCS)
(1)
J7 - WALL RAIL - W4L06050
1"x2 3/8"x22 3/4" (24x60x579)
(2)
J6 - WALL RAIL - W4L06089
1"x2 3/8"x25 5/8" (24x60x650)
(1)
J3 - WALL RAIL - W4L06092
1"x2 3/8"x27 1/4" (24x60x691)
STEP 60
(5)
(8)
BOLT WH 5/16x2-1/4 BLK
(1 PLC)
T-NUT 5/16
BLK
WASHER
LOCK EXT
8x19 BLK
(3)
(5)
LAG SCREW
WH 5/16x2
BLK
BOLT WH
5/16x2-1/4
BLK
LAG SCREW WH 5/16x2 BLK
(1 PLC)
LAG SCREW WH 5/16x2 BLK
(1 PLC)
BOLT WH 5/16x2-1/4 BLK
(1 PLC)
T-NUT 5/16 BLK
(5 PLCS)
WASHER LOCK EXT 8x19 BLK
(8 PLCS)
J7
J6
J3
BOLT WH 5/16x2-1/4 BLK
(2 PLCS)
J6
LAG SCREW WH 5/16x2 BLK
(1 PLC)
BOLT WH 5/16x2-1/4 BLK
(1 PLC)
(1)
H6 - WALL RAIL - W4L06088
1"x3 3/8"x54 1/2" (24x86x1384)
STEP 61
(4)
(28)
T-NUT 5/16
BLK
SCREW PFH
8x1 1/8
SCREW PFH 8x1 1/8
(28 PLCS)
WASHER
LOCK EXT
8x19 BLK
(2)
(2)
BOLT WH
5/16x2-1/4
BLK
T-NUT 5/16 BLK
(4 PLCS)
H6
WASHER LOCK EXT 8x19 BLK
(2 PLCS)
BOLT WH 5/16x2-1/4 BLK
(2 PLCS)
(15) - METAL TUBE - A4M00620
STEP 62
METAL TUBE
(15 PLCS)
(1)
J1 - WALL RAIL - W4L06104
1"x2 3/8"x54 1/2" (24x60x1384)
STEP 63
(2)
T-NUT 5/16
BLK
(2)
(2)
WASHER
LOCK EXT
8x19 BLK
BOLT WH
5/16x2-1/4
BLK
T-NUT 5/16 BLK
(2 PLCS)
WASHER LOCK EXT 8x19 BLK
(2 PLCS)
J1
BOLT WH 5/16x2-1/4 BLK
(2 PLCS)
(15)
O1 - PICKET - W4L06135
5/8"x1 3/8"x31 1/4" (16x34x795)
STEP 64
(30)
2 5/8 TYPICAL SPACING
2 5/8
SCREW PFH 8x1 1/4
(30 PLCS)
15 PLCS O1
2 5/8
SCREW PFH
8x1 1/4
(7)
O1 - PICKET - W4L06135
5/8"x1 3/8"x31 1/4" (16x34x795)
STEP 65
2 5/8 TYPICAL SPACING
(14)
SCREW PFH
8x1 1/4
2 5/8
2 5/8
7 PLCS O1
SCREW PFH 8x1 1/4
(14 PLCS)
(1)
T3 - PICKET - W4L06136
1"x1 3/8"x27 1/8" (24x34x688)
(1)
T6 - PICKET - W4L06137
1"x1 3/8"x19 5/8" (24x34x500)
STEP 66
(4)
2 5/8
SCREW PFH
8x1 1/2
2 5/8
2 5/8
2 5/8
SCREW PFH 8x1 1/2
(4 PLCS)
T6
T3
(1)
(1)
T7 - PICKET - W4L06138
1"x1 3/8"x18 3/8" (24x34x468)
T9 - PICKET - W4L06139
1"x1 3/8"x15 1/4" (24x34x386)
(1)
T11 - PICKET - W4L06141
1"x1 3/8"x8 3/4" (24x34x222)
(1)
T10 - PICKET - W4L06140
(1)
1"x1 3/8"x12" (24x34x304)
L2 - SUPPORT BOARD - W4L06142
5/8"x4 3/8"x15 5/8" (16x112x397)
STEP 67
2 5/8
(4)
SCREW PFH
8x1 1/2
(6)
SCREW PFH
8x1 1/4
2 5/8
2 5/8
1 15/16
SCREW PFH 8x1 1/4
(6 PLCS)
T11
T10
T9
L2
T7
SCREW PFH 8x1 1/2
(4 PLCS)
(1)
M1 - GROWTH BOARD - W4L06143
5/8"x3 3/8"x60 1/4" (16x86x1530)
STEP 68
(4)
M1
SCREW PFH 8x1 1/8
(4 PLCS)
SCREW PFH
8x1 1/8
(1)
H5 - SAFETY RAIL - W4L06059
1"x3 3/8"x68 5/8" (24x86x1742)
(1)
(1)
H85 - SAFETY RAIL - W4L06184
1"x3 3/8"x75" (24x86x1904)
- HAMMOCK - A6P00066
STEP 69
H85
H5
HAMMOCK
(1 PLC)
STEP 70
NOTE:
BACKYARD DISCOVERY RECOMMENDS NO MORE THAN
150 POUNDS ON THE HAMMOCK.
(7)
(7)
T-NUT 5/16
BLK
WASHER
LOCK EXT
8x19 BLK
(4)
(3)
BOLT WH
5/16x2-1/4
BLK
BOLT WH
5/16x1 3/4
BLK
BOLT WH 5/16x1 3/4 BLK
(1 PLC)
BOLT WH 5/16x1 3/4 BLK
(2 PLCS)
SR1
H5
HAMMOCK WITH
SAFETY RAILS
BOLT WH 5/16x2-1/4 BLK
(4 PLCS)
WASHER LOCK EXT 8x19 BLK
(7 PLCS)
T-NUT 5/16 BLK
(7 PLCS)
(2)
J4 - OUTER CURTAIN ROD HOLDER - W4L05293
1"x2 3/8"x2 3/8" (24x60x60)
(1)
J5 - INNER CURTAIN ROD HOLDER - W4L05294
1"x2 3/8"x2 3/8" (24x60x60)
STEP 71
(6)
SCREW PFH 8x1 3/4
(6 PLCS)
J4
J5
J4
SCREW PFH
8x1 3/4
(1)
(1)
- PLASTIC CURTAIN ROD - A6P00090
- CURTAIN - A6P00089
STEP 72
PLASTIC CURTAIN ROD
(1 PLC)
CURTAIN
(1 PLC)
(1)
- CURTAIN - A6P00089
STEP 73
CURTAIN
(1 PLC)
LADDER ASSEMBLY
FINAL ASSEMBLY
STEP 1
BOLT WH 5/16x1 1/2 BLK
(2 PLCS)
WASHER LOCK EXT 8x19 BLK
(2 PLCS)
T-NUT 5/16 BLK
(2 PLCS)
LADDER ASSEMBLY
(2)
(2)
(2)
BOLT WH
5/16x1 1/2
BLK
T-NUT 5/16
BLK
WASHER
LOCK EXT
8x19 BLK
MONKEY BAR ASSEMBLY
FINAL ASSEMBLY
STEP 2
NUT BARREL WH 5/16x5/8 BLK
(2 PLCS)
WASHER LOCK EXT 12x19 BLK
(2 PLCS)
BOLT WH 5/16x1/2 BLK
(2 PLCS)
(2)
NUT BARREL
WH 5/16x5/8
BLK
(2)
WASHER
LOCK EXT
12x19 BLK
(2)
MONKEY BAR ASSEMBLY
BOLT WH
5/16x1/2 BLK
SWINGBEAM ASSEMBLY
FINAL ASSEMBLY
STEP 3
WASHER FLAT 8x27 BLK
(4 PLCS)
(4)
WASHER SPLIT 5/16 BLK
(4 PLCS)
BOLT HEX 5/16x1 1/4 BLK
(4 PLCS)
(4)
BOLT HEX
5/16x1 1/4
BLK
WASHER
SPLIT 5/16
BLK
SWINGBEAM ASSEMBLY
(4)
WASHER
FLAT 8x27
BLK
(2)
- SWING SEAT GREEN - A6P00054
(6) FA - QUICK LINK - A100069
(1)
(4) EF - CHAIN GREEN 57" - A100047
(2) KN - CHAIN GREEN 31" - A100177
FINAL ASSEMBLY
STEP 4
CHAIN GREEN 31"
(2 PLCS)
TRAPEZE
(1 PLC)
CHAIN GREEN 57"
(4 PLCS)
QUICK LINK
(6 PLCS)
SWING SEAT GREEN
(2 PLCS)
- TRAPEZE - A6P00034
(1)
O70 - SLIDE MOUNTING BOARD - W102822
5/8"x1 3/8"x20 3/8" (16x34x517)
(1) QU - SLIDE VF 10 FT - A100287
FINAL ASSEMBLY
STEP 5
(3)
T-NUT 5/16
BLK
BOLT WH 5/16x1 1/4 BLK
(3 PLCS)
DRILL 3/8" (10mm) HOLES THROUGH FLOOR
(3)
(2)
SCREW PFH
8x1 1/8
5 5/16
SLIDE VF 10 FT
(1 PLC)
SCREW PFH 8x1 1/8
(2 PLCS)
O70
T-NUT 5/16 BLK
(3 PLCS)
3 1/8
BOLT WH
5/16x1 1/4
BLK
(1) EH - LTP ID TAG (LARGE) AGES 3-10 - A100051
FINAL ASSEMBLY
STEP 6
(4)
SCREW PFH 8x3/4
(4 PLCS)
LTP ID TAG (LARGE) AGES 3-10
(1 PLC)
SCREW PFH
8x3/4
(8) KC - METAL GROUND STAKE BROWN - A100178
FINAL ASSEMBLY
STEP 7
(2)
NOTE:
FAILURE TO USE GROUND STAKES CAN
VOID WARRANTY & CAUSE INJURY!
(2)
NUT BARREL
WH 1/4x5/8
BLK
(2)
BOLT WH
1/4x1/2 BLK
(6)
WASHER
LOCK EXT
8x15 BLK
(8)
LAG SCREW
WH 1/4x1-1/2
BLK
WASHER
FLAT 9x18
BLK
NUT BARREL WH 1/4x5/8 BLK
(2 PLCS)
WASHER LOCK EXT 8x15 BLK
(2 PLCS)
WASHER FLAT 9x18 BLK
(2 PLCS)
LAG SCREW WH 1/4x1-1/2 BLK
(6 PLCS)
WASHER FLAT 9x18 BLK
(6 PLCS)
METAL GROUND STAKE BROWN
(8 PLCS)
BOLT WH 1/4x1/2 BLK
(2 PLCS)
NOTE:
TWIST STAKES INTO GROUND AND ATTACH TO PLAYSET
APPROXIMATELY WHERE SHOWN
FINAL STEP
DOUBLE CHECK EVERY BOLT, SCREW AND NUT FOR TIGHTNESS. MAKE SURE EVERY BOARD IS
SECURE AND MAKE SURE THE PLAY SET IS LEVEL.
ENJOY YOUR NEW PLAY SET!
Limited Warranty
This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery
brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time
Products.
Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of
one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood,
hardware, and accessories. All wood carries a five (5) year pro-rated warranty against rot and decay. Refer to
the schedule below for charges associated with replacement of parts under this Limited Warranty. In addition,
Backyard Discovery will replace any parts within the first 30 days from date of purchase found to be missing
from or damaged in the original packaging.
This warranty applies to the original owner and registrant and is non-transferable. Regular maintenance is
required to assure maximum life and performance of this product and failure by the owner to maintain the
product according to the maintenance requirements may void this warranty. Maintenance guidelines are
provided in the Owner’s Manual.
This Limited Warranty does not cover:
•
•
•
•
•
•
•
•
Labor for any inspection
Labor for replacement of any defective item(s)
Incidental or consequential damages
Cosmetic defects which do not affect performance or integrity of a part or the entire product
Vandalism, improper use, failure due to loading or use beyond the capacities stated in the applicable
Assembly Manual.
Acts of nature including but not limited to wind, storms, hail, floods, excessive water exposure
Improper installation including but not limited to installation on uneven, unlevel, or soft ground
Minor twisting, warping, checking, or any other natural occurring properties of wood that do not affect
performance or integrity
Backyard Discovery products have been designed for safety and quality. Any modifications made to the
original product could damage the structural integrity of the unit leading to failure and possible injury.
Modification voids any and all warranties and Backyard Discovery assumes no liability for any modified
products or consequences resulting from failure of a modified product.
This product is warranted for RESIDENTIAL USE ONLY. Under no circumstance should a Backyard Discovery
product be used in public settings. Such use may lead to product failure and potential injury. Any and all public
use will void this warranty. Backyard Discovery disclaims all other representations and warranties of any kind,
express or implied.
This Warranty gives you specific legal rights. You may have other rights as well which vary from state to state
or province to province. This warranty excludes all consequential damages, however, some states do not allow
the limitation or exclusion of consequential damages and therefore this limitation may not apply to you.
Pro Rated Part Replacement Schedule
Product Age
All Parts
0-30 days from date of purchase
31 days to 1 year
Customer Pays
$0 and free shipping
$0 + S&H
Wood Rot and Decay Only
1 year
2 years
3 years
4 years
5 years
Over 5 years
$0 and free shipping
20% + S&H
40% + S&H
60% + S&H
80% + S&H
100% + S&H
Rev5/20/10 BRS
">