Miele KWT 2671 ViS MasterCool wine conditioning unit Operating Instructions

Add to my manuals
100 Pages

advertisement

Miele KWT 2671 ViS MasterCool wine conditioning unit Operating Instructions | Manualzz

Operating and installation instructions

Wine conditioning unit

To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.

en-GB M.-Nr. 11 273 080

Contents

Warning and Safety instructions ..........................................................................  5

Caring for the environment ................................................................................  13

Installation ............................................................................................................  14

Location................................................................................................................. 14

Climate range ................................................................................................... 15

Installation notes ................................................................................................... 16

Adjoining cabinets/units ................................................................................... 16

Load-bearing capacity of the niche floor ......................................................... 16

Ventilation ......................................................................................................... 17

Door hinge........................................................................................................ 17

Side-by-side ..................................................................................................... 17

Building-in dimensions ......................................................................................... 19

Dimensions when the appliance door is open (opening angle 90°) ................. 20

Dimensions when the appliance door is open (opening angle 115°) ............... 21

Dimensions of the furniture front........................................................................... 22

Installing the wine conditioning unit ...................................................................... 23

Before starting ................................................................................................. 23

Tools required................................................................................................... 23

Weight of the furniture front ............................................................................. 24

Aligning the building-in niche ........................................................................... 24

Checking the building-in niche......................................................................... 25

Before installation............................................................................................. 25

Preparing the building-in niche ........................................................................ 26

Pushing the wine conditioning unit into the building-in niche.......................... 29

Aligning the wine conditioning unit .................................................................. 31

Securing the wine conditioning unit in the building-in niche............................ 34

Preparing to install the furniture fronts ............................................................. 35

Securing and aligning the furniture front .......................................................... 38

Securing the covers ......................................................................................... 42

Fitting the door trim.......................................................................................... 44

Securing the plinth and plinth fascia ................................................................ 45

Limiting the opening angle of the appliance door............................................ 46

Electrical connection ............................................................................................. 47

Saving energy ......................................................................................................  49

Guide to the appliance ........................................................................................  51

Main screen ........................................................................................................... 53

Settings mode   .................................................................................................. 54

Accessories .........................................................................................................  56

Accessories supplied ............................................................................................ 56

2

Contents

Optional accessories............................................................................................. 56

Initial commissioning ..........................................................................................  57

Before using for the first time ................................................................................ 57

Choosing the right door assistant (Push2open/Pull2open)............................. 57

Operating the wine conditioning unit .................................................................... 58

Starting up for the first time ............................................................................. 59

Switching on and off ...........................................................................................  60

Switching off for longer periods of time ................................................................ 60

Selecting additional settings ..............................................................................  61

Switching Keypad lock   /   on or off ................................................................. 61

Performing a Self test   ....................................................................................... 62

Switching on the Door assistant   ....................................................................... 62

Switching off the Door assistant   ....................................................................... 64

Miele@home .......................................................................................................... 65

Switching off the Demo mode   ............................................................................ 68

Resetting the settings to their default settings   ................................................ 69

Switching Sabbath mode    on or off .................................................................... 70

Switching Ambient lighting    on or off................................................................ 71

Selecting the Ambient display............................................................................... 72

The ideal temperature and humidity ..................................................................  73

The optimum temperature..................................................................................... 73

Isolator plates for thermal separation............................................................... 73

Setting the temperature.................................................................................... 74

Humidity ................................................................................................................ 74

Increasing the humidity   ................................................................................. 75

Not increasing the humidity   ...........................................................................  75

Door alarm ...........................................................................................................  76

Storing wine bottles ............................................................................................  77

Wooden shelves .................................................................................................... 78

Moving the wooden shelves............................................................................. 78

Adjusting the wooden shelves ......................................................................... 78

Labelling wooden shelves ................................................................................ 79

Maximum capacity ........................................................................................... 79

SommelierSet ......................................................................................................  80

Setting up the SommelierSet ................................................................................ 80

Automatic defrosting ..........................................................................................  82

3

Contents

Cleaning and care ...............................................................................................  83

Cleaning agents..................................................................................................... 83

Before cleaning the wine conditioning unit ........................................................... 84

Interior cabinet, accessories and appliance door ................................................. 84

Cleaning the door seal .......................................................................................... 85

Cleaning the ventilation gaps ................................................................................ 85

After cleaning ........................................................................................................ 85

Problem solving guide ........................................................................................  86

Noises ...................................................................................................................  92

Service ..................................................................................................................  93

Contact in case of malfunction ............................................................................. 93

Warranty ................................................................................................................ 93

Conformity declaration .......................................................................................  94

Copyrights and Licences ....................................................................................  95

4

Warning and Safety instructions

This wine conditioning unit complies with all current local and national safety requirements. Inappropriate use can, however, lead to personal injury and material damage.

Read the operating and installation instructions carefully before using the wine conditioning unit. They contain important information on safety, installation, use and maintenance. This is to protect yourself from injury, and from damaging your wine conditioning unit.

In accordance with standard IEC 60335-1, Miele expressly and strongly advises that you read and follow the instructions in the chapter on installing the wine conditioning unit as well as the safety instructions and warnings.

Miele cannot be held liable for injury or damage caused by noncompliance with these instructions.

Keep these instructions in a safe place and pass them on to any future owner.

 Danger of injury and damage to the appliance due to the wine conditioning unit tipping over.

The wine conditioning unit is very heavy and can tip forwards when the appliance door is open.

Keep the appliance door shut until the wine conditioning unit has been built in and secured in its building-in niche in accordance with these operating and installation instructions.

 Danger of injury from broken glass.

If installed at altitudes above 2000 m there is a risk of the glass in the door breaking because of changes in air pressure. Shards of glass can cause severe injury.

5

Warning and Safety instructions

Correct application

 This wine conditioning unit is intended for use in the home and in similar environments, for example

– in shops, offices and similar work settings

– by the guests in hotels, motels, bed & breakfasts and other typical home settings.

This wine conditioning unit is not intended for outdoor use.

 The wine conditioning unit is intended for domestic use only for storing wine.

It must not be used for any other purpose.

 The wine conditioning unit is not suitable for storing and keeping cool medicines, blood plasma, laboratory preparations or other such materials or products. Incorrect use of the wine conditioning unit for such purposes can cause deterioration of the items stored. The wine conditioning unit is not suitable for use in areas where there is a risk of explosion.

Miele cannot be held liable for damage resulting from improper or incorrect use of the appliance.

 This wine conditioning unit may only be used by people (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are supervised whilst using it.

The wine conditioning unit may only be used by these people without supervision if they have been shown how to use it in a safe way and recognise and understand the consequences of incorrect operation.

6

Warning and Safety instructions

Safety with children

 Children under 8 years of age must be kept away from the wine conditioning unit unless they are constantly supervised.

 Children aged 8 and older may only use the wine conditioning unit without supervision if they have been shown how to use it in a safe manner. Children must be able to understand and recognise the possible dangers caused by incorrect operation.

 Children must not be allowed to clean or maintain the wine conditioning unit unsupervised.

 Please supervise children in the vicinity of the wine conditioning unit and do not let them play with it.

 The appliance door hinges of the wine conditioning unit can cause injury. Keep children away at all times.

 Danger of suffocation! Whilst playing, children could become entangled in packaging (such as plastic wrapping) or pull it over their head and suffocate. Keep packaging material away from children.

7

Warning and Safety instructions

Technical safety

 The coolant system is tested for leaks. The wine conditioning unit complies with statutory safety requirements and the appropriate EU guidelines.

 This wine conditioning unit contains the coolant Isobutane

(R600a), a natural gas which is environmentally friendly. The coolant does not damage the ozone layer and does not contribute to the greenhouse effect.

The use of this coolant has, however, led to a slight increase in the noise level of the appliance. In addition to the noise of the compressor, you might be able to hear the coolant flowing around the cooling circuit. Unfortunately, this cannot be avoided, but it does not affect the performance of the wine conditioning unit.

When transporting and installing the wine conditioning unit, ensure that no parts of the cooling circuit are damaged. Splashes of coolant can damage the eyes.

In the event of damage:

– Avoid naked flames or anything which creates a spark.

– Disconnect the wine conditioning unit from the mains electricity supply.

– Ventilate the room where the wine conditioning unit is located for several minutes.

– Contact the Miele Customer Service Department.

 The more coolant there is in a wine conditioning unit, the larger the room it should be installed in. In the event of a leakage, if the appliance is in a small room, there is the danger of combustible gases building up. For every 11 g of coolant at least 1 m 3 of room space is required. The amount of coolant in the appliance is stated on the data plate inside the wine conditioning unit.

8

Warning and Safety instructions

 To avoid the risk of damage to the wine conditioning unit, make sure that the connection data (fuse rating, frequency and voltage) on the data plate corresponds to the household supply.

Check that this is the case before connecting the wine conditioning unit. Consult a qualified electrician if in any doubt.

 The electrical safety of the wine conditioning unit can only be guaranteed when correctly earthed. It is essential that this standard safety requirement is met. If in any doubt please have the electrical installation tested by a qualified electrician.

 Reliable and safe operation of the wine conditioning unit can only be assured if it has been connected to the mains electricity supply.

 The socket must not be concealed behind the wine conditioning unit and must be easily accessible so that the appliance can be quickly disconnected from the electrical supply in case of an emergency.

 If the electrical connection cable supplied is damaged, it must only be replaced by an original spare part to prevent a hazard for the user. Miele can only guarantee the safety of the appliance when original Miele spare parts are used.

 Do not connect the wine conditioning unit to the mains electrical supply by a multi-socket adapter or extension lead. These are a fire hazard and do not guarantee the required safety of the appliance.

 If moisture gets into electrical components, it could cause a short circuit. Therefore, do not operate this wine conditioning unit in areas which are exposed to moisture (e.g in a garage or utility room).

9

Warning and Safety instructions

 This wine conditioning unit must not be used in a non-stationary location (e.g. on a ship).

 In environments with a tropical climate (above approximately

32 °C and above approximately 70 % humidity), the wine conditioning unit must be operated in an air-conditioned room. Otherwise, it is not possible to guarantee that the wine conditioning unit will operate without issues.

 Do not use a damaged wine conditioning unit. It could be dangerous. Check the wine conditioning unit for visible signs of damage.

 For safety reasons, this wine conditioning unit may only be used after it has been built in.

 The wine conditioning unit must be isolated from the electricity supply during installation, maintenance and repair work.

 Unauthorised installation, maintenance and repairs can cause considerable danger for the user.

Installation, maintenance and repairs must only be carried out by a

Miele authorised technician.

 While the wine conditioning unit is under warranty, repairs should only be undertaken by a Miele authorised service technician. Otherwise the warranty is invalidated.

 Miele can only guarantee the safety of the appliance when genuine original Miele replacement parts are used. Faulty components must only be replaced by Miele spare parts.

Correct use

 The wine conditioning unit is designed for use within a certain climate range (ambient temperatures), and should not be used outside this range. The climate range for your wine conditioning unit is stated on the data plate inside the appliance. Installing it in a room with too low an ambient temperature, e.g. a garage, will lead to the wine conditioning unit switching off for longer periods so that it cannot maintain the required temperature.

10

Warning and Safety instructions

 Do not cover or block the air vents as this could impair the efficiency of the appliance, increase the electricity consumption and could cause damage to the components.

 If the wine conditioning unit is used for storing food which contains fat or oil, make sure that it does not come into contact with plastic components. Any spillages of oil or fat could cause stress cracks to the plastic and cause it to break or split.

 Risk of fire and explosion. Do not store explosive materials in the wine conditioning unit or any products containing propellants (e.g.

spray cans). Electrical components can cause flammable mixes of gases to ignite.

 Danger of explosion. Do not operate any electrical appliances inside the wine conditioning unit. Danger of sparking and explosion.

 Only use genuine original Miele accessories and spare parts with this appliance. Using accessories or spare parts from other manufacturers will invalidate the warranty, and Miele cannot accept liability.

Cleaning and care

 Do not use any oils or grease on the door seals, as these will cause the seals to deteriorate and become porous with time.

 Do not use a steam cleaning appliance to clean this wine conditioning unit.

The steam could reach electrical components and cause a short circuit.

 Sharp edged or pointed objects will damage the evaporator, causing irreversible damage to the wine conditioning unit. Do not use sharp edged or pointed objects to

– remove frost and ice,

– remove labels, stickers etc.

11

Warning and Safety instructions

Transport

 Always transport the wine conditioning unit in an upright position and in its original transport packaging to avoid damage in transit.

 Danger of injury and damage to the appliance. The wine conditioning unit is very heavy and must be transported by two people.

Disposal of your old appliance

 If your old refrigeration appliance has a door lock, destroy it. This will prevent the risk of children playing accidentally locking themselves in and endangering their lives.

 Splashes of coolant can damage the eyes. Be careful not to damage any part of the pipework whilst awaiting disposal, e.g. by

– puncturing the coolant channels in the condenser,

– bending any pipework, or

– scratching the surface coating.

12

Caring for the environment

Disposal of the packing material

The packaging is designed to protect the wine conditioning unit from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled.

Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites.

Disposing of your old appliance

Electronic and electrical appliances contain many valuable materials. They also contain certain materials, compounds and components which were essential for their correct functioning and safety. These could be hazardous to your health and to the environment if disposed of with general waste or if handled incorrectly. Please do not, therefore, dispose of your old appliance with general waste.

Instead, please make use of officially designated collection and disposal points to dispose of and recycle electrical and electronic appliances in your local community, with your dealer or with Miele. By law, you are solely responsible for deleting any personal data from the appliance prior to disposal.

Take care not to damage your wine conditioning unit's pipework before or during transportation to an authorised collection depot.

This is to ensure that coolant in the cooling circuit and oil in the compressor is contained, and will not leak into the environment.

Please ensure that your old appliance poses no risk to children while being stored prior to disposal. For further information, see “Warning and safety instructions” in these operating and installation instructions.

13

*

T

A

N

S

L

L

O

N

*

Installation

Location

This appliance should be installed in a dry, well-ventilated room.

When deciding where to install your wine conditioning unit, please bear in mind that it will use more energy if installed near to a heater, a cooker or another appliance that gives off heat. Direct sunlight should also be avoided.

The higher the room temperature, the longer the compressor runs and the higher the energy consumption of the wine conditioning unit is.

When installing the wine conditioning unit, please note the following:

– The socket must be easily accessible in an emergency, not concealed behind the appliance.

– The plug and power cable must not touch the rear of the wine conditioning unit as they could be damaged by vibrations from the appliance.

– Do not plug in other appliances behind this wine conditioning unit.

If installation near a heat source is unavoidable, observe the following minimum distances between the appliance and the heat source:

– At least 3 cm to electric or gas stoves

– At least 30 cm to oil or coal-based stoves

If it is not possible to observe these minimum distances, an isolation plate must be installed between the wine conditioning unit and the heat source.

14

*

T

A

N

S

L

L

O

N

*

Climate range

The wine conditioning unit is designed for use within a certain climate range

(ambient temperatures) and should not be used outside this range. The climate range of the wine conditioning unit is stated on the data plate inside it.

Climate range

SN

N

ST

T

Ambient room temperature

+10 °C to +32 °C

+16 °C to +32 °C

+16 °C to +38 °C

+16 °C to +43 °C

Operating in a room which is too cold will cause the compressor to switch off for too long, causing the internal temperature in the wine conditioning unit to rise which could lead to damage.

 Risk of damage due to high humidity.

In environments with high humidity, condensation can build up on the external wine conditioning unit panels, which can cause corrosion.

Install the wine conditioning unit with sufficient ventilation in a dry and/or air-conditioned room.

After installation, make sure that the appliance door closes properly, the ventilation gaps are not covered and that the wine conditioning unit has been installed in accordance with these operating and installation instructions.

Installation

 Impaired functionality due to high humidity and high temperature.

High humidity (over approx. 70 %) combined with a high room temperature (over approx. 32 °C) can impair the function of your wine conditioning unit.

In environments with a tropical climate, the wine conditioning unit must be operated in an air-conditioned room.

15

*

T

A

N

S

L

L

O

N

*

Installation

Installation notes

 Risk of damage and injury from the wine conditioning unit tipping over.

The wine conditioning unit is very heavy and can tip forwards when the appliance door is open.

Keep the appliance door shut until the wine conditioning unit has been built in and secured in its building-in niche in accordance with these operating and installation instructions.

Due to its weight and size, the wine conditioning unit must be installed by two people.

Adjoining cabinets/units

The wine conditioning unit is screwed to the adjoining cabinets/units to the side and above. For this reason, it is essential that all cabinets/units are fixed to the ground or wall.

Load-bearing capacity of the niche floor

To ensure the safe installation of the wine conditioning unit and to guarantee its correct functioning, the floor of the niche where the appliance is to be installed must be smooth and even.

It must be made from strong, rigid material.

Because the wine conditioning unit is extremely heavy when fully loaded, it is essential that the floor it stands on is able to bear its weight. If necessary, seek the advice of an architect or construction expert.

When fully loaded, the weight of the wine conditioning unit is approx.:

KWT 26x1 Vi

KWT 26x1 ViS

674 kg

679 kg

16

*

T

A

N

S

L

L

O

N

*

Ventilation

 Risk of fire and damage due to insufficient ventilation.

If the wine conditioning unit is not ventilated sufficiently, the compressor will run more frequently and for longer periods.

This will result in increased energy consumption and a higher operating temperature for the compressor. This may, in turn, cause damage to the compressor.

Please ensure that there is adequate ventilation around the wine conditioning unit.

It is essential to observe the required ventilation gaps. The ventilation gaps must not be covered or blocked in any way.

Door hinge

 Risk of damage and injury when changing the door hinge.

Changing the door hinge singlehandedly can cause damage to the appliance and injury.

The wine conditioning unit is supplied with fixed hinges. Under no circumstances should you attempt to change the door hinges yourself.

If you need to change the door hinges to the other side, please contact the Customer Service Department.

Side-by-side

This wine conditioning unit can be installed side-by-side with another refrigeration appliance. The following over-

Installation view will show you which side-by-side installation options you have with your wine conditioning unit.

Depending on the installation situation, you will need the side-by-side installation kit for side-by-side installation (see “Optional accessories” in

“Accessories”).

Instructions for installing appliances side-by-side can be found in the sideby-side installation kit installation instructions.

. . . with partition wall

The wall a between the side-by-side wine conditioning units/refrigeration appliances must be at least 16 mm thick.

17

*

T

A

N

S

L

L

O

N

*

Installation

If the door hinges of the appliances are next to each other, you must take into account the thickness of the furniture fronts and door handles so that the appliance doors do not collide and become damaged if they are opened at the same time.

The wine conditioning units/refrigeration appliances are secured individually in their building-in niche using the supplied installation material.

If the partition wall a is narrower than

160 mm , you will need the side panel heater from the side-by-side installation kit to prevent condensation from forming and any resulting damage.

When planning building-in niches, please note that the niche into which the appliance with the side panel heater is installed must be 4 mm wider (see “Installation dimensions” in “Installation”).

. . . without partition wall

If the wine conditioning units/refrigeration appliances are to be installed next to each other without a partition wall between them, they will need to be joined together with the side-by-side installation kit. In addition, you must install the side panel heater to prevent condensation from forming and any resulting damage.

If the partition wall a is thicker than

160 mm , you do not need the side-byside installation kit, nor the side panel heater.

18

*

T

A

N

S

L

L

O

N

*

Building-in dimensions

≥ 629 mm

Installation

2134−2164 mm

610 mm

≥ 262 mm

≥ 85 mm

30 mm

22 mm

Side view

102 mm

≥ 102 mm

19

*

T

A

N

S

L

L

O

N

*

Installation

Dimensions when the appliance door is open (opening angle 90°)

10 mm

≤ 38 mm

* The dimensions of the furniture front and the door handle vary depending on the design of the kitchen.

20

*

T

A

N

S

L

L

O

N

*

Installation

Dimensions when the appliance door is open (opening angle 115°)

299 mm

38

mm

115°

* The dimensions of the furniture front and the door handle vary depending on the design of the kitchen.

21

*

T

A

N

S

L

L

O

N

*

Installation

Dimensions of the furniture front

604 mm

450 mm

77 mm

149,5 mm

1622 mm

2029 mm

257, 5 mm

≥ 102−132 mm

22

*

T

A

N

S

L

L

O

N

*

Installation

Installing the wine conditioning unit

Before starting ...

It is essential to read these operating and installation instructions carefully before starting to install the wine conditioning unit.

The wine conditioning unit should be installed by a suitably qualified installer in accordance with these operating and installation instructions.

Safe operation of the wine conditioning unit is only assured if it has been installed and connected in accordance with these operating and installation instructions.

 Risk of damage and injury from the wine conditioning unit tipping over.

The wine conditioning unit is very heavy and can tip forwards when the appliance door is open.

Keep the appliance door shut until the wine conditioning unit has been built in and secured in its building-in niche in accordance with these operating and installation instructions.

Due to its weight and size, the wine conditioning unit must be installed by two people.

Tools required

– Cordless drill

– TX 20 screwdriver

– Hammer drill

– Drill bits in various sizes, depending on materials

– Hammer

– Open spanner

– Ratchet wrench, attachment: socket,

8 mm

– Adhesive tape

– Utility knife

– Pipe wrench

– Spirit level

– Tape measure

– Pencil

Other

– Step ladder

– Sack truck

23

*

T

A

N

S

L

L

O

N

*

Installation

Weight of the furniture front

Before fitting a furniture door, ensure that the weight of the front does not exceed the maximum permitted:

Wine conditioning unit

KWT 26x1 Vi(S)

Max. weight of furniture front

73 kg

Aligning the building-in niche

 Risk of damage due to excessive weight of furniture fronts.

Installing furniture fronts which are heavier than the maximum permitted weight could damage the hinges.

This damage can affect various factors, such as operation of the appliance.

Before installing the furniture fronts, make sure that they do not exceed the maximum permitted weight.

The building-in niche must be carefully aligned using a spirit level before the wine conditioning unit is installed. The niche corners must be at 90° angles to each other, otherwise the furniture front will not sit straight on all 4 corners of the building-in niche.

24

*

T

A

N

S

L

L

O

N

*

Installation

Checking the building-in niche

 Check the installation dimensions

(see “Installation dimensions” in “Installation”).

 Check the position of the electrical connection. The electrical connection is 3 m long.

The socket must not be concealed behind the refrigeration appliance and must be easily accessible so that the appliance can be quickly disconnected from the electrical supply in case of an emergency.

Before installation

 Before installation, remove any accessories from the back of the appli-

 ance.

Check the wine conditioning unit for transport damage.

Do not install the wine conditioning unit if it is damaged.

 Check the surroundings for possible collisions (see “Dimensions with appliance door open” in “Installation”).

 Only install the wine conditioning unit in stable, solid building-in niches, positioned on an even and level floor.

 Also check the building-in niche for the following criteria:

– The side walls of the building-in niche must be even.

– The surrounding walls of the buildingin niche must be at least 16 mm thick.

– The surrounding walls must be securely fixed to the floor or wall.

– Shortened side walls must be at least

100 mm deep.

 Check that all parts at the back of the appliance are unhindered.

 To protect the floor when installing the wine conditioning unit, secure an off-cut of flooring or similar material to the floor in front of the installation area.

25

*

T

A

N

S

L

L

O

N

*

Installation

 With the help of several people as required, carefully lift the wine conditioning unit from the pallet, starting with the back of the appliance.

 Risk of damaging the floor from the load.

Moving the wine conditioning unit can cause damage to the floor.

Move the wine conditioning unit carefully on floors that are sensitive to scratching.

 Do not remove the installation aids   from the appliance door. These will be required later for aligning the appliance in the building-in niche.

 Risk of damage and injury from the wine conditioning unit tipping over.

As soon as you unscrew the brackets that fix the wine conditioning unit to the pallet, the appliance is no longer secured.

Due to its weight and size, the wine conditioning unit must be installed by two people .

As soon as you have set the wine conditioning unit upright, you can move it using the rollers on the bottom.

Preparing the building-in niche

 Risk of damage and injury from the wine conditioning unit tipping over.

The wine conditioning unit is very heavy and can tip forwards when the appliance door is open.

The building-in niche must be secured to the wall behind it and/or above it with several screws. Only this can ensure that the wine conditioning unit will not tip over after being installed in the building-in niche.

In addition, use the provided anti-tip brackets to secure the building-in niche.

2

Parts required for installation are supplied with the wine conditioning unit.

The plastic bags supplied are marked with letters for easy identification.

 Unscrew the fixing brackets   .

26

*

T

A

N

S

L

L

O

N

*

 When performing the individual assembly steps, observe the letters specified and use the matching plastic bag with the required installation equipment.

Installation

The anti-tip brackets prevent the wine conditioning unit from tipping.

The anti-tip brackets are also used to fix the building-in niche securely to the surrounding walls.

 Use 2 anti-tip brackets   for each individual appliance or 4 anti-tip brackets for each (side-by-side) combination of 2 appliances.

 Position the anti-tip brackets   on the left and right of the building-in niche.

Depending on the subsequent adjustment of the feet, the anti-tip brackets are positioned 2134–2164 mm from the floor of the niche.

27

*

T

A

N

S

L

L

O

N

*

Installation

 Danger of injury and damage to the appliance due to the wine conditioning unit tipping over.

If the anti-tip brackets are fixed too high up, they cannot be used to secure the wine conditioning unit.

There must not be more than 8 mm between the anti-tip brackets and the wine conditioning unit.

The accessory pack supplied contains fixing screws for various applications/materials.

Securing to a concrete wall

 Make sure that the gap between the wine conditioning unit‘s rear wall and the building-in niche does not exceed

51 mm.

 Place a wooden wedge behind the anti-tip brackets   if necessary.

 While holding the anti-tip brackets in place, mark the necessary drill holes on the rear wall of the building-in niche.

Securing to a wooden wall

28

*

T

A

N

S

L

L

O

N

*

Securing with a wooden wedge

 Secure the building-in niche to the wall behind it and/or above it as required using the anti-tip brackets   .

Installation

Pushing the wine conditioning unit into the building-in niche

Take care not to damage the electrical connection whilst pushing the wine conditioning unit into the building-in niche.

If you are installing several appliances side by side, secure the wine conditioning units/refrigeration appliances to one another now (see the installation instructions for the side-by-side installation kit).

To ensure that the wine conditioning unit can then be aligned correctly, the plinth must be removed from the appliance base.

 Carefully guide a flat-head screwdriver through the grate in the plinth   on both sides and use it to push the internal plastic latches outwards to release the plinth.

 Place the plinth to one side.

29

*

T

A

N

S

L

L

O

N

*

Installation

5

6

 Affix edge protection   to the adjacent furniture fronts.

 Insert the plug connector at the back of the wine conditioning unit (see

“Electrical connection” in “Installation”).

 Insert the plug   into the socket.

The electrical socket should be close to the wine conditioning unit and easily accessible.

 Risk of damage due to electrical overload.

If the wine conditioning unit is electrically overloaded, this can cause a short circuit and therefore damage to your appliance.

When you install appliances side by side, each appliance must have its own separate electrical socket.

Tip: Secure the power cable to prevent it becoming caught: tie a piece of string to the middle of the power cable and as the wine conditioning unit is being pushed into the niche, pull the cable forward underneath the appliance.

 Push the wine conditioning unit into the building-in niche.

 If the wine conditioning unit cannot be pushed into the building-in niche

(because the floor is uneven, for example), unscrew the rear feet slightly

(see “Aligning the wine conditioning unit” in “Installation”) and slide the appliance into the niche.

 Remove the edge protection   from the adjacent furniture fronts.

30

*

T

A

N

S

L

L

O

N

*

Aligning the wine conditioning unit

The installation aids   on the appliance door provide assistance with the alignment of the wine conditioning unit in the building-in niche.

The installation aids are suitable for a furniture front thickness of 19 mm or

38 mm.

 Align the wine conditioning unit with adjacent furniture fronts as described below.

Installation

Furniture front thickness of 19 mm

Furniture front thickness of 38 mm

The adjustable feet at the front and back of the appliance can all be adjusted from the front of the appliance.

 Risk of damage due to incorrect feet adjustment.

You may damage the adjustable feet if you use a cordless screwdriver.

Always adjust the front and rear feet by hand.

31

*

T

A

N

S

L

L

O

N

*

Installation

 Position the supplied spacers   on both sides on the markings next to the adjustable feet at the front of the wine conditioning unit.

 Adjust the rear feet with a ratchet (attachment: socket, 8 mm) or a TX 20 screwdriver   .

32

*

T

A

N

S

L

L

O

N

*

Installation

 Place a spirit level across the installation aids   on the appliance door to check the wine conditioning unit's alignment.

 Unscrew the adjustable feet   and   on both sides at least until the marking on the plinth has reached the specified distance of 32 mm on the spacer   . The standard dimension of

32 mm relates to a niche height of

2134 mm.

It is important to adjust the feet to a height of at least 32 mm so that the ventilation of the wine conditioning unit via the plinth functions correctly.

 Adjust the front feet with a ratchet (attachment: socket, 8 mm) or a TX 20 screwdriver   .

Tip: Proceed carefully when adjusting the feet, alternating between the left and right feet.

 Risk of damage if the feet are adjusted too much.

The rear adjustable feet can be damaged.

Unscrew the feet only until the marking on the plinth is aligned to a maximum of 62 mm (max. niche height of 2164 mm).

 Check the alignment of the wine conditioning unit again using the installation aids   and the spirit level.

33

*

T

A

N

S

L

L

O

N

*

Installation

Securing the wine conditioning unit in the building-in niche

If it is not possible to secure the wine conditioning unit at the top, it can be attached to the building-in niche with the side fixing plates:

 Screw the lugs for the fixing plate   into the cabinets/units above the appliance.

 Open out the side fixing lugs   .

 Screw the side fixing lugs   to the adjacent cabinets/units.

34

*

T

A

N

S

L

L

O

N

*

 Open the appliance door.

Installation

Preparing to install the furniture fronts

 Open the appliance door as far as it will go.

 Screw the fixing plate lugs   at the top and bottom to the cabinets/units adjacent to the appliance.

In a side-by-side combination, only the external panels of the wine conditioning units/refrigeration appliances can be secured to the adjacent cabinets/units.

 Unscrew the installation aids   from the appliance door.

35

*

T

A

N

S

L

L

O

N

*

Installation

 Unscrew the angle trims   from both sides of the appliance door and place the trims and screws to one side – they will be required later.

 Close the appliance door.

 Measure the gap  X between the mounting frame and the upper edge of the adjacent furniture front.

 Remove the nuts and washers   from the threaded bolts   and store them in a safe place – they will be required later.

 Take the mounting frame   off the appliance door by removing it upwards.

36

*

T

A

N

S

L

L

O

N

*

Installation

 Place the furniture front on a firm surface, with the external side facing downwards (place on a blanket or similar to prevent it from becoming scratched).

 Mark the distance  X -3 mm on the inner side of the furniture front.

 Also locate and mark the centre point  Y on the furniture front.

 Position the mounting frame   according to the markings on the furniture front.

 Pre-drill the holes.

 Secure the mounting frame   to the top of the furniture front, using at least 6 screws.

The mounting frame has several different types of holes to take account of a variety of furniture fronts.

When securing the frame, always screw into the strongest part of the furniture front. To do this, select screws which are slightly shorter than the thickness of the furniture front.

 Screw the appliance handle to the furniture front from the inside if necessary (not for handle-free kitchens).

 Screw the mounting frame   to the furniture front:

Use at least one screw for each retaining point on the mounting frame   .

37

*

T

A

N

S

L

L

O

N

*

Installation

Securing and aligning the furniture front

 Now insert the angle trims   on both sides as far as they will go into the provided spaces in the mounting frame   .

 Open the appliance door and hang the furniture front on its frame   onto the threaded bolts   .

38

*

T

A

N

S

L

L

O

N

*

Installation

 Press the angle trims   into the white plastic frame on both sides from the outside and screw them on loosely at first. Spare screws are provided in the plastic bag marked with the letter E.

 Align the depth of the furniture front via the gaps in the angle trims   .

 Place the spacers   on top of the corners of the furniture front on both sides.

 Close the appliance door and check the distance between the door and adjacent furniture doors.

 Align the height and sides of the furniture front using the threaded bolts   .

39

*

T

A

N

S

L

L

O

N

*

Installation

 Close the appliance door and check the distance between the door and adjacent furniture fronts again.

Mounting the fixing brackets

 Place the washers and nuts   back in position and tighten the nuts   .

The furniture front is now secured.

The fixing bracket is used to secure the furniture front to the bottom of the appliance door.

Do not mount the fixing brackets until the wine conditioning unit (or side-byside combination, if applicable) has been installed and the furniture fronts have been aligned.

 Open the appliance door as far as it will go.

 Now tighten the screws in the angle trims   .

 Open the appliance door.

 Remove the spacers   from the furniture front.

 Slide the fixing bracket   from the outside onto the screw at the bottom of the appliance door.

40

*

T

A

N

S

L

L

O

N

*

Installation

 Tighten the screw at the bottom of the appliance door.

 Screw the fixing bracket   securely to the furniture front.

 Fit the cover   over the fixing bracket   .

41

*

T

A

N

S

L

L

O

N

*

Installation

 Insert the two parts of the cover into one another.

 Click the covers   onto the fixing bracket.

Securing the covers

Cover viewed from the side

 Before the cover   can be installed in the gap above the wine conditioning unit, it must be assembled as follows:

 Place the assembled cover   into the gap above the wine conditioning unit so it clicks into place. While doing so, slide both parts of the cover together as required.

42

*

T

A

N

S

L

L

O

N

*

Installing the cover in a side-by-side combination

Installation

 Insert the pin (from the side-by-side installation kit) halfway into the channel in the cover for the left-hand appliance.

 Place the second cover onto the pin and press the two covers together.

 Click the two covers together into the gap above the appliances.

 Secure both sides of the wine conditioning unit using at least 3 clips   for the covers.

 Fit the plastic covers   on both sides of the appliance door by clicking them into the gap between the appliance door and the furniture front, starting at the bottom and working up to the top.

 Now attach the covers   onto the retaining clips   on each side.

In the case of side-by-side installation, the covers are only required on the outer side.

43

*

T

A

N

S

L

L

O

N

*

Installation

 Fit the cover   onto the light contact switch.

Fitting the door trim

 Trim the long pieces of door trim for the right and left sides to the length required X.

 Fit the door trim into the gap between the furniture front and the glass.

 Cut the door trim to the width of the cut-out in the furniture front as required. An extra length of trim is supplied to help calculate the length required.

 Cut the short pieces of door trim for the top and bottom of the door to the length required Y.

 Fit the door trim into the gap between the furniture front and the glass.

44

*

T

A

N

S

L

L

O

N

*

Securing the plinth and plinth fascia

Installation

 Click the plinth   onto the bottom of the appliance base.

 Risk of fire and damage due to insufficient ventilation.

If the wine conditioning unit is not ventilated sufficiently, the compressor will run more frequently and for longer periods.

This will result in increased energy consumption and a higher operating temperature for the compressor. This may, in turn, cause damage to the compressor.

Please ensure that there is adequate ventilation around the wine conditioning unit.

It is essential to observe the required ventilation gaps. The ventilation gaps must not be covered or blocked in any way.

 If necessary, cut the plinth fascia to the required length and height (cut along the lower edge of the plinth where it touches the floor).

 Secure the bottom of the plinth fascia to the plinth.

45

*

T

A

N

S

L

L

O

N

*

Installation

Limiting the opening angle of the appliance door

The door hinges on the wine conditioning unit are set ex-works to enable the appliance door to be opened wide.

If the appliance door hits an adjacent wall when opened, for example, the opening angle can be limited to 90°.

 Open the appliance door.

 Insert the pin into the lower hinge from above.

This will limit the opening angle of the appliance door to 90°.

46

*

T

A

N

S

L

L

O

N

*

Installation

Electrical connection

The wine conditioning unit must only be connected using the connection cable supplied (AC 220–240 V, 50/60 Hz supply). A longer connection cable is available to order from the Miele Customer

Service Department.

The fuse rating must be at least 10 A.

This appliance must be connected to a suitable switched socket. The electrical installation must comply with local and national safety regulations (e.g.

VDE 0100 in Germany, BS 7671 in the

UK).

The socket must not be concealed behind the wine conditioning unit and must be easily accessible so that the appliance can be quickly disconnected from the electrical supply in case of an emergency.

If the socket is no longer accessible after installation, an additional means of disconnection must be provided for all poles. Suitable means of disconnection include switches with an all-pole contact gap of at least 3 mm. These include circuit breakers, fuses and contactors (EN 60335).

The plug and power cable must not touch the rear of the wine conditioning unit as they could be damaged by vibrations from the wine conditioning unit. This could result in a short circuit.

Do not plug in other appliances behind this wine conditioning unit.

Do not connect the appliance to the mains electricity supply by an extension lead. Extension leads do not guarantee the required safety of the wine conditioning unit (e.g. danger of overheating).

Do not connect the wine conditioning unit to a stand-alone inverter such as those used with an autonomous energy source, e.g. solar power .

When the wine conditioning unit is switched on, power surges could result in a safety switch-off. This could damage the electronic module. The wine conditioning unit must not be used with energy-saving devices either. These reduce the amount of energy supplied to the wine conditioning unit, which also overheats.

47

*

T

A

N

S

L

L

O

N

*

Installation

Connecting the wine conditioning unit

 Insert the plug connector into the socket at the back of the wine conditioning unit.

Make sure that the plug connector has clicked into position correctly.

 Insert the plug of the wine conditioning unit into the socket.

The wine conditioning unit is now connected to the electricity supply.

48

Installation /

Maintenance

Temperature setting

Saving energy

Normal energy consumption

In a ventilated room.

Protected from direct sunlight.

Not near to a heat source

(radiator, oven).

Where the ideal ambient room temperature is approx.

20 °C.

Ventilation gaps uncovered and dusted regularly.

10 to 12 °C

Increased energy consumption

In an enclosed, unventilated room.

In direct sunlight.

Near to a heat source (radiator, oven).

Where the ambient room temperature is above 25 °C.

Ventilation gaps covered or dusty.

The lower the temperature, the higher the energy consumption.

49

Saving energy

Use

Normal energy consumption

Wooden shelves arranged as they were when the appliance was delivered.

Only open the door when necessary and for as short a time as possible. Store wine bottles in an organised way.

Do not over-fill the appliance to allow air to circulate.

Increased energy consumption

Frequent opening of the door for long periods will cause a loss of coldness.

The wine conditioning unit works harder to cool down and the compressor runs for longer periods.

Poor air circulation will cause a loss of coldness.

50

Guide to the appliance a Display b On/Off switch c Wooden shelves with labels d Interior lighting e Isolator plate for thermal separation of the wine conditioning zones f SommelierSet* g Glass door with UV filter h Automatic door opening (Push2open/Pull2open)

51

Guide to the appliance

* The SommelierSet consists of:

A glass holder, a bottle holder, 2 accessory boxes and a decanter plate. The

SommelierSet also includes felt inserts in various sizes.

52

Guide to the appliance

Main screen

1

11

° C

2

11

° C

11

° C

4

5

3 a Temperature display (target temperature) for the 3 wine conditioning zones b   sensor control

For setting the temperature and humidity   c   sensor control

For switching the interior lighting on and off when the appliance door is closed

(ambient lighting) d Display for Miele@home connection status

(only visible when Miele@home has been set up) e Sensor control   for adjusting various settings in Settings mode

53

Guide to the appliance

Settings mode  

In Settings mode, you can select the following appliance functions and alter their settings to some extent:

Symbol

Language

Display brightness

Colour scheme

 /  Buzzer tones

/

Keypad tone

°F / °C Temperature unit

 /  Keypad lock

Function

Set

Adjust (darker to brighter)

Set (dark or bright)

Adjust the volume or switch off the Buzzer tones completely (e.g. for the door alarm)

Adjust the volume or switch off the Keypad tone completely

Set (°Fahrenheit or °Celsius)

Switch on or off

(see “Selecting additional settings”)

 Self test

 *

Door assistant

Miele@home

Demo mode

Factory default settings

Ambient lighting

Ambient display

Sabbath mode

The system restarts and is checked for faults or malfunctions

(see “Selecting additional settings”)

( Push2open or Pull2open ) Switch on or off

(see “Selecting additional settings”)

Set up, deactivate or query WiFi connection status

(see “Selecting additional settings”)

Switch off

* (only visible when Demo mode , is switched on see “Selecting additional settings”)

Reset to default settings

(see “Selecting additional settings”)

Choose between 5 different settings for ambient lighting

(see “Selecting additional settings”)

Set the appearance of the display when the appliance door is closed

(see “Selecting additional settings”)

Switch on or off

(see “Selecting additional settings”)

54

Guide to the appliance

Symbols in Settings mode  

 / 

 / 

OK

Scroll in Settings mode or select a setting

Change a setting (e.g. display brightness)

Confirm a setting

Exit the menu level

55

Accessories

Accessories supplied

Appliance plug

Chalk

Use the chalk to annotate the magnetic strips on the wooden shelves to identify your wines quickly and easily.

Optional accessories

A range of useful Miele accessories and care products are available for your wine conditioning unit.

Multi-purpose microfibre cloth

The microfibre cloth is suitable for removing fingerprints and light soiling from surfaces such as stainless steel, glass, plastic and chrome without the use of chemicals.

Stainless steel front panel

Stainless steel front panels give your wine conditioning unit a high-quality appearance.

Plinth fascias are also available in a stainless steel look.

Side-by-side installation kit

To install two or more wine conditioning units/refrigeration appliances next to one another, you will need the side-byside installation kit (see “Side-by-side” in “Installation”).

Accessories are available to order via the Miele Webshop, from Miele directly (see back cover for contact details) or from your Miele dealer.

56

Initial commissioning

Before using for the first time

Allow the wine conditioning unit to stand for approx. 1 hour before connecting it to the power supply.

This will prevent potential functional problems with the wine conditioning unit.

Packaging material

 Remove all packaging material from the inside of the appliance.

Always remove all packaging material, including adhesive tape, before switching on the wine conditioning unit. The adhesive tape is difficult to remove from cold surfaces.

Cleaning the wine unit

Please refer to the relevant instructions in “Cleaning and care”.

 Clean the inside of the appliance and the accessories.

Choosing the right door assistant

(Push2open/Pull2open)

The door assistant helps you to open the appliance door.

You can choose between the two door assistants Push2open and Pull2open (see

“Switching Door assistant    on” in “Selecting additional settings”).

The default door assistant is Push2open .

 Select the

Pull2open door assistant if your wine conditioning unit has a furniture front with a handle.

 Select the

Push2open door assistant if your wine conditioning unit has a handle-free furniture front.

Using the SommelierSet

 “The SommelierSet” describes how to use the SommelierSet.

57

58

Initial commissioning

Operating the wine conditioning unit

The touch display can be scratched by pointed or sharp objects, e.g.

pens.

Only touch the display with your fingers.

If your fingers are cold, the touch display may not react.

 

11

39

11

0

°F 11

° C

The sensor controls underneath the temperature display can be selected directly by touch; the symbols and text in or above the temperature display can only be displayed .

Settings mode  

In Settings mode   , you can select different wine conditioning unit functions and alter their settings to some extent (see “Selecting additional settings”).

 Touch the   sensor control to open

Settings mode.

 Use the   and   sensor controls to select the function for which you wish to adjust the settings.

 Confirm your selection with  OK .

 Adjust the settings using either the   and   sensor controls or the   and   sensor controls.

 Confirm your selection with  OK .

The setting with the coloured background is always the selected setting; it can be confirmed directly with OK .

 Touch the   sensor control if you wish to switch to the previous menu level or terminate the process.

Every touch of the display is confirmed with an audible keypad tone.

You can switch off this keypad tone in

Settings mode   .

Initial commissioning

Starting up for the first time

 Open the appliance door.

 Switch the wine conditioning unit on by pressing the on/off switch.

The on/off switch is located below the display.

The wine conditioning unit will start to cool and the interior lighting will come on when the appliance door is opened.

Miele will appear in the wine conditioning unit display.

 When you switch the wine conditioning unit on for the first time, you will be asked to make the following settings:

– Set the  Language

(if you accidentally select the wrong  Language , return to Settings mode   and use the   symbol to change the language)

– Set the  Temperature unit :

°C (degrees Celsius) or °F (degrees

Fahrenheit)

– Set up Miele@home :

 Select Continue if you wish to set up

Miele@home now (to do this, follow the instructions under “ Miele@home ” in “Selecting additional settings”).

 Select Skip if you would prefer to set up Miele@home later.

 Use the   and   sensor controls to select the right setting and select OK to confirm your selection.

 Touch the   sensor control if you want to return to the previous menu level.

Set-up successful will appear on the display.

 Confirm the start-up process with

OK .

The main screen will appear on the display (see “Main screen” in “Appliance description”).

You cannot terminate the initial startup process. The only way to terminate the process is to switch off the wine conditioning unit, though the process will continue when the appliance is switched back on.

59

60

Switching on and off

Switching the wine conditioning unit on

 Open the appliance door.

 Switch the wine conditioning unit on by pressing the on/off switch.

The wine conditioning unit will start to cool and the interior lighting will come on when the appliance door is opened.

Miele will appear, followed by the main screen on the wine conditioning unit display.

 

11

39

11

0

°F 11

° C

Switching off for longer periods of time

If the wine conditioning unit is not going to be used for a longer period of time:

 switch it off,

 switch off at the wall and withdraw the plug from the socket, or disconnect the fuse,

 clean the wine conditioning unit, and

 leave the door ajar to air the wine conditioning unit and avoid odours building up inside it.

If the wine conditioning unit is switched off, but not cleaned, during a long absence and the door is left shut, there is a risk of mould building up inside the appliance.

The wine conditioning unit must be cleaned.

Switching the wine conditioning unit off

 Switch the wine conditioning unit off by pressing the on/off switch.

The cooling and interior lighting are switched off.

Please note: the wine conditioning unit is not disconnected from the power supply when it is switched off with the on/off switch.

Selecting additional settings

In Settings mode   , you can select different wine conditioning unit functions and alter their settings to some extent, allowing you to adjust the appliance to suit your requirements.

Only the functions in Settings mode   that require further explanation are described below.

The door alarm and other warnings are automatically disabled when the appliance is in Settings mode   .

The display is unlocked briefly so you can adjust the settings as required.

Closing the appliance door will reactivate the sensor lock.

Switching Keypad lock   /

  on or off

Switch Keypad lock on if you wish to protect your wine conditioning unit from unwanted temperature changes or other unintentional adjustments in Settings mode   .

 In Settings mode   , use the   and   sensor controls to select  Keypad lock and select  OK to confirm your selection.

 Use the   and   sensor controls to switch the sensor lock On or Off and select OK to confirm your selection.

 The sensor lock will not be activated until you close the appliance door.

Nothing will appear on the display to indicate that the sensor lock is switched on.

The message Press OK for 6 seconds to unlock will appear on the display if you select a sensor control while the sensor lock is switched on.

 Follow the instructions on the display.

61

Selecting additional settings

Performing a Self test  

Perform a Self test if you are concerned that your wine conditioning unit is not working properly and want to check if it is suffering from any problems.

 In Settings mode   , use the   and   sensor controls to select  Self test and select  OK to confirm your selection.

 Touch the   sensor control if you wish to terminate the process.

The Self test starts and the wine conditioning unit is checked for any faults or malfunctions.

– The message System restart will appear on the display if the self test does not discover any faults or malfunctions.

– If the self test does discover any faults or malfunctions, they are indicated as error messages on the display.

An alarm will also sound.

 If you find the alarm disruptive, you can switch it off in advance by touching the   sensor control.

 Make a note of the error message(s) displayed.

 Contact the Customer Service Department and inform them of the error message(s) on the display.

 Confirm the message with OK .

System restart will appear on the display.

The wine conditioning unit briefly switches off and then back on automatically.

Self test completed will appear on the display.

 Confirm the message with OK .

The main screen will appear on the display again.

Switching on the Door assistant  

You can choose between the two door assistants: Push2open and Pull2open .

The default door assistant is Push2open .

The Push2open door assistant is suitable for furniture fronts without handles. The door opens automatically when you gently press against it.

The Pull2open door assistant is suitable for furniture fronts with handles. The appliance door can be opened easily with little force.

 Risk of damage if the appliance door is closed prematurely.

When the door assistant is switched on, repeatedly closing the appliance door early can lead to damage or malfunctions.

Refrain from holding onto or closing the appliance door while automatic door opening is still extended. However, if you have closed the appliance door, leave it closed for

5 minutes. Automatic door opening resets itself.

62

Selecting additional settings

Switching on Push2open

 In Settings mode   , use the   and   sensor controls to select  Door assistant and select  OK to confirm your selection.

 Use the   and   sensor controls to select Mode and select OK to confirm your selection.

 Use the   and   sensor controls to select Push2open and select OK to confirm your selection.

 Touch the   sensor control to return to the previous menu level.

– Adjusting the intensity

You can also adjust the intensity of the

Push2open  function. The lower the set intensity, the less force required when you push against the appliance door.

 In Settings mode   , use the   and   sensor controls to select  Door assistant and select  OK to confirm your selection.

 In Settings mode   , use the   and   sensor controls to select  Intensity and select  OK to confirm your selection.

 Use the   and   sensor controls to select the right intensity ( Low , Medium ,

High ) and select OK to confirm your selection.

– Adjusting the duration of the Auto-

Close function

You can also adjust the duration for how long the appliance door will remain open until it closes automatically.

 In Settings mode   , use the   and   sensor controls to select  Door

 assistant and select  OK to confirm your selection.

 In Settings mode   , use the   and   sensor controls to select  Auto-

Close and select  OK to confirm your selection.

Use the tion.

  and   sensor controls to select the duration (5 to 30 seconds) and touch OK to confirm your selec-

To protect against inadvertent opening: if you do not pull the appliance open, it will close again by itself after a duration defined by you.

Switching on Pull2open

 In Settings mode   , use the   and   sensor controls to select  Door assistant and select  OK to confirm your selection.

 Use the   and   sensor controls to select Mode and select OK to confirm your selection.

 Use the   and   sensor controls to select Pull2open and select OK to confirm your selection.

 Touch the   sensor control to return to the previous menu level.

63

Selecting additional settings

– Adjusting the intensity

You can also adjust the intensity of the

Pull2open  function. The lower the set intensity, the less force required when you pull the appliance door.

 In Settings mode   , use the   and   sensor controls to select  Door assistant and select  OK to confirm your selection.

 In Settings mode   , use the   and   sensor controls to select  Intensity and select  OK to confirm your selection.

 Use the   and   sensor controls to select the right intensity ( Low , Medium ,

High ) and select OK to confirm your selection.

Switching off the Door assistant  

 In Settings mode   , use the   and   sensor controls to select  Door assistant and select  OK to confirm your selection.

 Use the   and   sensor controls to select Mode and select OK to confirm your selection.

 Use the   and   sensor controls to select Off and select OK to confirm your selection.

 Touch the   sensor control to return to the previous menu level.

64

Selecting additional settings

Miele@home

Your wine conditioning unit is equipped with an integrated WiFi module.

Networking is deactivated at the factory.

You will need:

– A WiFi network

– The Miele@mobile app

– A Miele user account The user account can be created via the

Miele@mobile app.

The Miele@mobile app will guide you as you connect your wine conditioning unit to your home WiFi network.

Once your wine conditioning unit is connected to your WiFi network you can use the app to carry out the following activities, for example:

– Call up information on the operating status of your wine conditioning unit

– Change the settings on your wine conditioning unit

Connecting your wine conditioning unit to your WiFi network will increase energy consumption, even when the wine conditioning unit is switched off.

Make sure that the signal of your

WiFi network is sufficiently strong in the place where you want to set up your wine conditioning unit.

Availability of the WiFi connection

The WiFi connection shares a frequency range with other appliances (including microwave ovens and remote control toys). This can give rise to sporadic or even complete connection failures.

Therefore, the availability of featured functions cannot be guaranteed.

Miele@home availability

The ability to use the Miele@mobile app depends on the availability of the

Miele@home service in your country.

The Miele@home service is not available in every country.

For information about availability, please visit www.miele.com.

Miele@mobile App

The Miele@mobile App is available to download free of charge from the Apple

App Store

®

or from the Google Play

Store™.

65

Selecting additional settings

Connecting your wine conditioning unit via the Miele@mobile app

You will also require the following to log in:

– Your WiFi network password

– The password for your wine conditioning unit

Your wine conditioning unit‘s password is its serial number, which can be found on the data plate.

The data plate can be found inside the wine conditioning unit.

 As soon as your wine conditioning unit has been integrated into your

WiFi network, the message Connection successful will appear on your wine conditioning unit‘s display.

 Confirm the process with OK again.

If the WiFi connection is active,   will appear on the display.

If your serial number is “78000001”, for example, your password will be

“78000001”.

 In Settings mode   , use the   and   sensor controls to select  Miele@home and select  OK to confirm your selection.

Set up will appear on the display.

 Confirm your selection with  OK .

 Use the   and   sensor controls to select via the App and select OK to confirm your selection.

 Open the Miele@mobile app and follow the instructions in the app.

66

Selecting additional settings

Connecting your wine conditioning unit via WPS

Your router must be equipped with the

WPS function for this connection option.

 In Settings mode   , use the   and   sensor controls to select  Miele@home and select  OK to confirm your selection.

Set up will appear on the display.

 Confirm your selection with  OK .

 Use the   and   sensor controls to select via WPS and select OK to confirm your selection.

 Now follow the instructions on the display.

 Confirm the process with OK .

To be able to use the Miele@home functions, you also have to register your wine conditioning unit in the app.

 As soon as your wine conditioning unit has been integrated into your home network via WPS, the message

Connection successful will appear on the display.

 Confirm the process with OK again.

If the WiFi connection is active,   will appear on the display.

Deactivating Miele@home

 In Settings mode   , use the   and   sensor controls to select  Miele@home and select  OK to confirm your selection.

 Use the   and   sensor controls to select Deactivate and select OK to confirm your selection.

Deactivation successful will appear on the display.

 Confirm the message with OK .

Your wine conditioning unit is now disconnected from your WiFi network.

The   symbol will go out on the display.

Activating Miele@home

If you have already activated

Miele@home and then disconnected the connection, you will need to reactivate the connection.

 In Settings mode   , use the   and   sensor controls to select  Miele@home and select  OK to confirm your selection.

 Use the   and   sensor controls to select Activate and select OK to confirm your selection.

Activation successful will appear on the display.

 Confirm the message with OK .

If the WiFi connection is active,   will appear on the display.

67

Selecting additional settings

Checking the WiFi connection status

 In Settings mode   , use the   and   sensor controls to select  Miele@home and select  OK to confirm your selection.

 Use the   and   sensor controls to select Connection status and select OK to confirm your selection.

Information about the WiFi connection status will then appear on the display:

–   connected: there is a strong connection

–   connected: there is an average connection

–   connected: there is a weak connection

–  : disconnected

Setting up Miele@home again

If you have changed your WiFi network, you can set up Miele@home again for your wine conditioning unit.

 In Settings mode   , use the   and   sensor controls to select  Miele@home and select  OK to confirm your selection.

 Use the   and   sensor controls to select Set up again and select OK to confirm your selection.

Reset configuration?

 will appear on the display.

 Use the   and   sensor controls to select Yes or No and select OK to confirm your selection.

Switching off the Demo mode  

Demo mode allows the wine conditioning unit to be presented in the showroom without the cooling system being switched on . This setting is not needed for domestic use.

If Demo mode has been switched on as a default setting,    will show on the display.

 In Settings mode   , use the   and   sensor controls to select  Demo mode and select  OK to confirm your selection.

Press OK for 4 seconds to deactivate will appear on the display.

 Follow the instructions on the display.

The countdown Demo mode will deactivate in seconds will appear on the display.

Demo mode deactivated. Appliance cooling switched on will appear on the display.

 Confirm the message with OK .

The main screen will appear on the display again.

68

 / 

/

°C / °F

 / 

Selecting additional settings

Resetting the settings to their default settings  

You can reset the wine conditioning unit‘s settings to their default settings.

 In Settings mode   , use the   and   sensor controls to select  Factory default settings and select  OK to confirm your selection.

 Use the   and   sensor controls to select Reset and select OK to confirm your selection.

After a brief delay, Settings reset will appear on the display.

 Confirm the message with OK .

The initial commissioning process restarts (see “Starting up for the first time” in

“Initial commissioning”).

The wine conditioning unit‘s settings will be reset to the following values:

Function Default settings

Language

Display brightness

Colour scheme

Buzzer tones

Keypad tone

Temperature unit

Keypad lock

Door assistant

Miele@home

Ambient lighting

Ambient display

Sabbath mode

Humidity

Temperature in the wine conditioning zones

English

Middle value

(4 of 7 segments)

Dark

Middle value

(4 of 7 segments)

Middle value

(4 of 7 segments)

°Celsius

Switched off

Push2open

Switched off

Ambient 2

Temperature display

Switched off

Not increased

11 °C

69

Selecting additional settings

Switching Sabbath mode    on or off

The wine conditioning unit offers a Sabbath mode for the purposes of religious observance.

When Sabbath mode is switched on, you cannot make any settings on your wine conditioning unit.

Ensure that the appliance door is properly closed, as visual and audible alarms are switched off in Sabbath mode .

 In Settings mode   , use the   and   sensor controls to select  Sabbath mode and select  OK to confirm your selection.

 Use the   and   sensor controls to select On or Off and select OK to confirm your selection.

When Sabbath mode is switched on,

  will appear on the display and the display brightness will be reduced (the display does not change when the appliance door is closed).

When Sabbath mode   is switched on, the following functions are switched off:

– Door assistant

(for furniture fronts without handles, the appliance door will have to be pulled from the bottom or side)

– Lighting

– All acoustic and visual signals

– Temperature display

– The ambient lighting

(if previously switched on)

You can still select:

– The sensor control for Settings mode   so that Sabbath mode can be switched off.

The Sabbath mode function will switch itself off automatically after approx.

125 hours.

70

Selecting additional settings

Switching Ambient lighting    on or off

The Ambient lighting can be switched on so your wines are on display even when the appliance door is closed. The interior lighting now remains on even when the appliance door is closed.

Each wine conditioning zone has its own light so that your wine conditioning unit is lit up to maximum effect.

 Touch the   sensor control on the display so that it is highlighted in colour.

 Close the appliance door.

The interior lighting now remains on even when the appliance door is closed.

 To switch the Ambient lighting off, touch the   sensor control so that it is no longer highlighted in colour.

The interior lighting is now switched off when the appliance door is closed.

Selecting the intensity of the Ambient lighting  

You can set the intensity of the Ambient lighting in Settings mode   .

You can also choose the wine conditioning zones in which the Ambient lighting should be switched on.

 In Settings mode   , use the   and   sensor controls to select  Ambient lighting and select  OK to confirm your selection.

 Use the   and   sensor controls to select the correct setting ( Ambient 1 –

Ambient 5 ):

– Ambient 1 (weak) – Ambient 3 (strong):

Weak to strong lighting in all wine conditioning zones

– Ambient 4 :

Only the lighting in the wine conditioning zone in the centre is switched on

– Ambient 5 :

The lighting in the wine conditioning zone in the centre is stronger than the lighting in the top and bottom wine conditioning zones.

 Confirm your selection with  OK .

 Close the appliance door.

The Ambient lighting is now set to the desired setting.

Thanks to the use of LED lighting, the wine will not be adversely affected by heat or UV light.

71

Selecting additional settings

 Danger of injury from LED lighting.

This lighting corresponds to risk group RG 2. If the cover is defective, there is a danger of eye injury.

If the lighting cover is defective, do not look from a close range directly into the lighting with optical instruments (e.g. magnifying glass or similar).

Selecting the Ambient display

You can choose what the display should look like when the appliance door is closed.

 In Settings mode   , use the   and   sensor controls to select  Ambient display and select  OK to confirm your selection.

 Use the   and   sensor controls to select the required display settings:

– Temperature

– Miele logo

– Off (display switched off completely).

 Confirm your selection with  OK .

The display settings you have selected are now active when the appliance door is closed.

As soon as you open the appliance door, the main screen appears in the display in the usual way.

72

The ideal temperature and humidity

Wine keeps on maturing depending on the surrounding conditions. The length of time for which wine can be kept in good condition will therefore depend not only on the temperature but also on the air quality.

The wine conditioning unit with its constant ideal temperature, increased air humidity and odour free atmosphere offers the perfect conditions for storing your wine.

It also guarantees a vibration-free environment (in contrast to a refrigerator) so that the maturing process is not disturbed.

The optimum temperature

Wine can be stored at a temperature between 6 and 18 °C. If you are storing white and red wines together, select a temperature between 12 and 14 °C.

This is suitable for both white and red wines. Red wine should be taken out of the wine conditioning unit and opened at least two hours before drinking to allow it to breathe and develop its aroma.

At too high a temperature (over 22 °C) wine matures too quickly, which prevents the aromas from developing further. Wine cannot mature fully at too low a temperature (below 5 °C).

Fluctuations in temperature put wine under stress and interrupt the maturing process. It is therefore very important to maintain a constant temperature.

Type of wine

Light, fruity reds:

Full-bodied reds:

Rosé wines:

Delicate, aromatic whites:

Full-bodied or sweet whites:

Champagne, sparkling white wines, Prosecco:

Recommended drinking temperature*

+14 °C to +16 °C

+18 °C

+8 °C to +10 °C

+8 °C to +12 °C

+12 °C to +14 °C

+6 °C to +10 °C

* Store the wine 1 or 2 °C cooler than the recommended drinking temperature as it warms up a little when poured into the glass.

Tip: Full-bodied reds should be opened for 2-3 hours before drinking to allow the wine to breathe and develop its aroma.

Isolator plates for thermal separation

The wine conditioning unit has 2 fixed isolator plates that divide the interior cabinet into 3 zones, which can be conditioned in different ways. This means that you can store up to 3 different types of wine at the same time – for example, red wine, white wine and champagne.

73

The ideal temperature and humidity

Setting the temperature

 Touch the   sensor control to set the temperature.

The previously set temperatures for the

3 wine conditioning zones are displayed.

 Use the   and   sensor controls to select the wine conditioning zone for which you want to adjust the temperature and select  OK to confirm your selection.

 Use the   and   sensor controls to set the temperature. Keeping your fingers on the sensor controls changes the temperature continuously.

 Confirm the temperature setting with  OK or wait approx. 8 seconds after the last touch of the sensor control. The temperature will then be automatically adopted.

Tip: The newly set temperature can also be confirmed and adopted by closing the appliance door.

The temperature display always shows the required temperature.

If you have adjusted the temperature, wait for approx. 6 hours if the wine conditioning unit is not very full and for approx. 24 hours if the wine conditioning unit is full before checking the temperature display. It will take this long for the appliance to give an accurate reading.

 If, after this time, the temperature is still too high or too low, you will need to adjust it again.

Temperature range

In all three wine conditioning zones, it is possible to set temperatures between

5 °C and 20 °C.

Humidity

In most refrigerators, the humidity is too low for wine and therefore a refrigerator is not suitable for wine storage. Higher humidity levels are necessary when storing wine to moisturise natural corks from the outside. When the humidity is too low, the natural corks dry out and the bottle is no longer tightly sealed. For this reason, wine bottles should always be stored horizontally to ensure that natural corks are also moisturised from the inside. If air gets into the bottle, this will have a negative impact on the wine.

Tip: Humidity levels can be set separately for each wine conditioning zone.

Always increase the humidity level in a wine conditioning zone whenever you are using it to store wine bottles sealed with natural corks.

 Danger of damage from excess amounts of moisture.

An increase in humidity will lead to condensation on the interior cabinet walls. Condensate can cause damage such as corrosion to the wine conditioning unit.

Do not introduce additional moisture to air in the cabinet, e.g. by placing a dish of water in the wine conditioning unit.

74

The ideal temperature and humidity

Increasing the humidity  

If you have set a higher level of humidity, the fans will switch on automatically. This will distribute the humidity and the temperature evenly around the wine conditioning unit so that you can store all your wine under the same excellent conditions. The fans switch off automatically when the appliance door is opened and remain switched off for as long as it is kept open.

 Touch the   sensor control to set the temperature.

 Use the   and   sensor controls to select the wine conditioning zone for which you want to increase the humidity and select  OK to confirm your selection.

 Touch the   button.

The   button will then be highlighted in colour.

 Confirm the setting with OK or wait approx. 8 seconds after the last press of the button. The setting will be automatically adopted.

The humidity increases in the selected wine conditioning zone.

Not increasing the humidity  

 Touch the   sensor control to set the temperature.

 Use the   and   sensor controls to select the wine conditioning zone for which you do not want to increase the humidity and select  OK to confirm your selection.

 Touch the   button.

The   button will then no longer be highlighted in colour.

 Confirm the setting with OK or wait approx. 8 seconds after the last press of the button. The setting will be automatically adopted.

The humidity decreases in the selected wine conditioning zone.

75

Door alarm

Door alarm

An alarm will sound if the appliance door has been left open for longer than

2 minutes.

The message Close the door will also appear on the display.

As soon as the appliance door is closed, the alarm tone will stop and the message in the display will go out.

Switching the door alarm off early

If the alarm disturbs you, it can be turned off early.

 Touch the OK  sensor control.

The alarm will stop and the message will disappear from the display.

After a certain time, the alarm will sound again and the message will reappear on the display until the appliance door has been closed.

76

Storing wine bottles

Vibration and movement have a negative effect on the maturing process, which can in turn affect the taste of the wine.

To avoid disturbing other bottles when removing a bottle of wine, store bottles of the same type beside each other on the same shelf. Avoid stacking bottles on top of one another on the wooden shelves.

Always place the bottles in a horizontal position so that the natural corks can be kept moist on the inside and air is prevented from getting into the bottles.

Tip: We also recommend increasing the humidity level inside the wine conditioning unit for wine bottles with natural corks (see “Increasing the humidity   ” in

“The ideal temperature and humidity”).

 Risk of injury from falling wine bottles.

Wine bottles may become wedged in the wooden shelves above and fall out of the wine conditioning unit when the shelves are pulled out.

Always pull out the wooden shelves slowly and carefully.

 Risk of damage and injury from broken glass.

If wooden shelves and bottles protrude too far forwards, they may damage the glass door when it is closed.

Please ensure that the wooden shelves and wine bottles do not protrude.

Do not cover the vents in the rear wall, as they are essential for keeping the appliance cool.

77

Storing wine bottles

Wooden shelves Adjusting the wooden shelves

The slats in the wooden shelves can be individually adjusted to suit, so that every bottle is stored in perfect safety regardless of shape or size.

The wooden shelves are on telescopic runners which can be pulled out to make it easier to store and remove bottles.

Moving the wooden shelves

The wooden shelves can be removed and replaced again if required.

 Pull the wooden shelf out until it stops, then lift it up and off the runners. Hold onto the frame to do this.

 To replace the shelf, click it into place on the extended rails from above. The magnetic strip must face the front.

 Simply lift individual slats to move or remove them from the wooden shelves.

78

Storing wine bottles

Labelling wooden shelves

For quick and easy identification of the wines stored, you can write on the blackboard-painted surface on the strips on the wooden shelves.

You can write directly on the strip or remove it from the wooden shelf. To do so:

Maximum capacity

 Risk of damage due to heavy loads.

Excessive loads can damage the wooden shelves.

Do not exceed the maximum loadbearing capacity of 35 kg for each wooden shelf.

Do not stack bottles on the wooden shelves.

Up to 77 Bordeaux bottles (0.75 l) can be stored in the wine conditioning unit.

 Hold the strip by the sides and pull it forwards.

 The strip can be wiped clean with a damp cloth.

 Risk of damage due to incorrect cleaning.

The blackboard coating on the labelling strips may be damaged.

Use clean water only to wipe the strip. Do not use a cleaning agent .

 Label the strip with the chalk supplied and replace it on the wooden shelf from above.

79

SommelierSet

Setting up the SommelierSet

The SommelierSet can be used to have the wine in your wine conditioning unit ready for drinking. You can store wine glasses and accessories, decant your wine and store open bottles in the wine conditioning unit.

 Place the large accessory box on the left and the small accessory box   on the right on the wooden shelf.

 Place the decanter plate   in the centre of the wooden shelf.

a Large and small box for accessories b Decanter plate, e.g. for wine carafes c Glass holder to store and cool wine glasses d Bottle holder with adjustable holders for wine bottles of varying sizes

For ideal access, the SommelierSet sits on the wooden shelf at the bottom of the middle wine conditioning zone.

80

SommelierSet

 Pull the runners above the bottom shelf out as far as they will go on both sides.

 Insert the two racks into the glass holder   .

 Position the glass holder   on the runner on the left and the bottle holder   on the runner on the right.

Check that the pins on the runners engage in the mounts on the both the glass holder and the bottle holder.

 Push the glass holder   and the bottle holder   all the way into the unit.

 Next, place the felt inside the accessory boxes   and on top of the decanter plate   , the glass holder   and the bottle holder   .

 Slide the retainers into the bottle holder   .

Tip: The retainers can be adjusted individually to suit the size of your wine bottles.

81

Automatic defrosting

The wine conditioning unit defrosts automatically.

82

Do not let water get into the electronic unit or the lighting.

 Risk of damage due to moisture ingress.

The steam from a steam cleaner can damage plastic and and electrical components.

Do not use a steam cleaner to clean the wine conditioning unit.

The data plate located inside the wine conditioning unit must not be removed. It contains information which is required in the event of a service call.

Cleaning and care

Cleaning agents

To avoid damaging the surfaces of your appliance, do not use

– Cleaning agents containing soda, ammonia, acids or chlorides

– Cleaning agents containing descaling agents

– Abrasive cleaning agents (e.g. scouring powder, scouring liquid or pumice stones)

– Cleaning agents containing solvents

– Stainless steel cleaning agents

– Dishwasher cleaner

– Oven sprays

– Glass cleaner (except on the glass in the appliance door)

– Hard, abrasive sponges and brushes

(e.g. pot scourers)

– Eraser stain remover blocks

– Sharp metal scrapers

Cleaning and conditioning agents used inside the wine conditioning unit must be food safe.

We recommend using lukewarm water with a little washing-up liquid for cleaning.

83

Cleaning and care

Before cleaning the wine conditioning unit

 Switch the wine conditioning unit off by pressing the on/off switch.

 Switch off at the wall and withdraw the plug from the socket, or disconnect the fuse.

 Take any wine bottles out of the wine conditioning unit and store them in a cool place.

 Take out all other removable parts for cleaning (see “Moving the wooden shelves” in “Storing wine bottles”).

 Remove the labelling strips from the wooden shelves before cleaning them

(see “Labelling wooden shelves” in

“Storing wine bottles”).

Interior cabinet, accessories and appliance door

Clean the wine conditioning unit at least once a month.

Remove soiling immediately to prevent it from drying on.

 Clean the interior cabinet of the wine conditioning unit with a solution of lukewarm water and a little washingup liquid. Rinse all parts by hand. Do not wash in a dishwasher.

 After cleaning, wipe with clean water and dry with a soft cloth.

 Risk of damage due to incorrect cleaning.

The blackboard coating on the labelling strips may be damaged.

Use clean water only to wipe the labelling strips on the wooden shelves.

Do not use a cleaning agent.

 The wooden shelves should only be wiped with a well wrung-out damp cloth. They must not be allowed to get wet.

 Leave the wine conditioning unit open to air it sufficiently for a short while and to prevent odour build-up.

 Clean the glass panes in the appliance door with glass cleaner.

84

Cleaning and care

Cleaning the door seal

 Risk of damage as a result of incorrect cleaning.

If you treat the door seal with oils or grease, it can become porous.

Do not use any oils or grease on the door seal.

 The door seal should be cleaned regularly with clean water and then wiped dry with a cloth.

Cleaning the ventilation gaps

A build-up of dust will increase the energy consumption of the appliance.

 The ventilation gaps should be cleaned on a regular basis with a brush or vacuum cleaner (e.g. use the dusting brush for Miele vacuum cleaners)

After cleaning

 Replace all shelves and accessories in the wine conditioning unit.

 Reconnect to the mains and switch the wine conditioning unit back on.

 Place the wine bottles back in the wine conditioning unit and close the appliance door.

85

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed.

The following guide may help you to find the reason for a malfunction or a fault, and to correct it.

To prevent cold from escaping, open the appliance as little as possible until the fault has been corrected.

Problem

If you are concerned that your wine conditioning unit is not working properly, you can perform a Self test . Your wine conditioning unit will be checked for any faults or malfunctions.

The wine conditioning unit is not getting cold and the interior lighting does not come on when the appliance door is opened.

The compressor is switching on more frequently and for longer periods of time. The temperature in the wine conditioning unit is too low.

Cause and remedy

Any errors identified during the self test are shown on the display.

 Perform a self test (see “Performing a Self test    ” in “Additional settings”).

 If necessary, contact the Customer Service Department and inform them of the error message(s) on the display.

The wine conditioning unit is not switched on.

 Switch the wine conditioning unit on. The temperature appears on the display.

The plug is not inserted in the socket correctly.

 Insert the plug into the socket.

The mains fuse has tripped. There could be a fault with the wine conditioning unit, the household electrical wiring or another electrical appliance.

 Contact a qualified electrician or the Miele Customer Service Department.

The temperature in the wine conditioning unit is set too low.

 Correct the temperature setting.

The ventilation gaps in the housing unit have been covered or become too dusty.

 Do not block the ventilation gaps.

 Dust the ventilation gaps regularly.

The appliance door has been opened too frequently, or a large number of bottles have been put inside the unit all at once.

86

Problem solving guide

Problem

The compressor comes on less and less often and for shorter periods of time. The temperature in the wine conditioning unit rises.

The compressor runs continuously.

Cause and remedy

 Only open the appliance door when necessary and for as short a time as possible.

After a while, the temperature will return to normal by itself.

The appliance door is not properly closed.

 Close the appliance door.

After a while, the temperature will return to normal by itself.

The ambient room temperature is too high. The higher the ambient temperature, the longer the compressor has to run.

 See the information in “Location” in “Installation”.

The wine conditioning unit has not been installed properly in the building-in niche.

 See the information in “Installing the wine conditioning unit” in “Installation”.

Not a fault. The temperature setting is too high.

 Correct the temperature setting.

 Check the temperature again after 24 hours.

An alarm sounds.

No alarm sounds despite the appliance door being open.

The appliance door cannot be opened.

This is not a fault. To save energy, the compressor runs at a lower speed, but for longer, when less cooling is required.

The appliance door of the wine conditioning unit has been open for longer than approx. 2 minutes.

 Close the appliance door.

You have switched off the audible signal.

 Switch the audible signal back on using Settings mode   .

The Pull2open  door assistant is switched on but the wine conditioning unit has a handle-free furniture front.

 For handle-free furniture fronts, switch on the

Push2open  door assistant (see “Switching on the

Door assistant    ” in “Selecting additional settings”).

87

Problem solving guide

Problem

The appliance door cannot be opened when

Sabbath mode     is switched on.

Cause and remedy

The Push2open  door assistant is switched on at the same time as Sabbath mode .

 When Sabbath mode is switched on, the door assistant is deactivated.

 Pull the appliance door open from below or from the side.

88

Problem solving guide

Display warnings

Message

The warning sounds and the message Close the door will appear on the display.

The   symbol lights up in the display. The wine conditioning unit does not get cold, although the unit controls are working.

Cause and remedy

The appliance door is open.

 Close the appliance door.

 If you wish to turn the alarm off early, touch the OK sensor on the display.

The alarm will stop.

The temperature display is dark and the   symbol is shown in the display.

F Please call Miele Service appears on the display and an alarm sounds.

The Sabbath mode     function is switched on. The interior lighting is switched off and the wine conditioning unit is cooling down.

 You can switch off Sabbath mode at any time (see

“Switching Sabbath mode     on or off” in “Selecting additional settings”).

There is a fault.

 Make a note of the error message if necessary.

 Call the Miele Customer Service Department.

 To turn the alarm off, touch the   symbol.

The error message will not disappear from the display until the error has been rectified.

The voltage level is too high/low.

 Observe the connection data under “Installation –

Electrical connection”.

 Contact the Miele Customer Service Department if necessary.

 To turn the alarm off, touch the   symbol.

The error message will not disappear from the display until the error has been rectified.

The Demo mode     is switched on. Demo mode allows the wine conditioning unit to be presented in the showroom without the cooling system being switched on. This setting is not needed for domestic use.

 Switch off Demo mode   (see “Switching Demo mode     off” in “Selecting additional settings”).

89

Problem solving guide

The interior lighting is not working.

Problem

The interior lighting is not working.

Cause and remedy

The wine conditioning unit is not switched on.

 Switch the wine conditioning unit on.

The Sabbath mode  function is switched on: the temperature display is dark and the   symbol is shown in the display.

 You can switch off Sabbath mode at any time via

Settings mode   .

There is a fault.

 Risk of electric shock due to exposed, live electrical components.

When removing the lighting cover, there is a risk of coming into contact with live electrical components.

Do not remove the lighting cover. The LED lighting may only be repaired or replaced by the Customer

Service Department.

 Danger of injury from LED lighting.

This lighting corresponds to risk group RG 2. If the cover is defective, there is a danger of eye injury.

If the lighting cover is defective, do not look from a close range directly into the lighting with optical instruments (e.g. magnifying glass or similar).

The interior lighting is on even when the appliance door is closed.

 Call the Customer Service Department.

The Ambient lighting  function is switched on.

 Switch off the Ambient lighting     function (see

“Switching Ambient lighting     on or off” in “Selecting additional settings”).

90

Problem solving guide

General problems with the wine conditioning unit

Problem

Mildew has begun to form on the wine bottle labels.

The slats on the wooden shelves are warping.

A white deposit has formed on the wine bottle corks.

Cause and remedy

Mildew can begin to form on the labels, depending on the type of label adhesive used.

 Clean the wine bottles and remove any adhesive residue.

Volume change due to moisture absorption or drying out is a typical characteristic of wood. An increase in humidity will cause wooden components to warp, which can lead to cracking. Knots and grain patina are part of the natural character of wood.

The corks have oxidised due to contact with the air.

 Use a dry cloth to wipe off the deposit. The deposit will not affect the quality of the wine.

91

Noises

Normal noises What causes them

Brrrrr ...

A humming noise is made by the motor (compressor). This noise can get louder for brief periods when the motor switches on.

Blubb, blubb ...

A gurgling noise can be heard when coolant is circulating through the pipes.

Click ...

Sssrrrrr ...

Clicking sounds are made when the thermostat switches the motor on and off.

On multi-zone wine conditioning units you can sometimes just hear the sound of the fan inside the appliance.

Crack ...

A cracking sound can be heard when material inside the wine conditioning unit expands.

Remember that the noise of the compressor and the coolant circulating in the system is unavoidable.

Noises that you can easily rectify

Rattling, vibrating

Possible cause

The wine conditioning unit is uneven.

Shelves are unstable or sticking.

Bottles or containers are touching each other.

The transport cable clips are hanging loose at the back of the appliance.

Remedy

Realign the wine conditioning unit using a spirit level, by raising or lowering the screw feet underneath the appliance.

Check all removable items and refit them correctly.

Separate them.

Remove the cable clips.

92

Contact in case of malfunction

In the event of any faults which you cannot remedy yourself, please contact your Miele Dealer or Miele Service.

Contact information for Miele Service can be found at the end of this document.

Please note that telephone calls may be monitored and recorded for training purposes and that a call-out charge will be applied to service visits where the problem could have been resolved as described in this booklet.

Please quote the model and serial number of your appliance when contacting

Miele. This information can be found on the data plate.

The data plate is located inside the wine unit.

Warranty

The appliance warranty is valid for 2 years from date of purchase. In the UK, you must activate your cover by calling

0330 160 6640 or registering online at www.miele.co.uk.

For more information on country-specific warranty terms and conditions, please contact Miele Customer Service.

Service

93

Conformity declaration

Miele hereby declares that this wine unit complies with Directive 2014/53/EU.

The complete text of the EU declaration of conformity is available from one of the following internet addresses:

– Products, Download from www.miele.co.uk

– For service, information, operating instructions etc: go to www.miele.co.uk/domestic/customer-information-385.htm and enter the name of the product or the serial number

Frequency band of the WiFi module

Maximum transmitting power of the WiFi module

2.4000 GHz –

2.4835 GHz

< 100 mW

94

Copyrights and Licences

Miele uses their own and third party software which is not subject to any so-called

Open Source Licence for the operation and control of the appliance. This software/ these software components are protected by copyright. The copyright powers of

Miele and third parties have to be respected.

Furthermore, this appliance contains software components which are distributed under Open Source licence conditions. Please refer to the document “Open

Source Information and Licenses” for the Open Source components contained therein, together with the corresponding copyright notices, copies of the licence terms valid at the time, and any further information. The liability and warranty provisions of the Open Source licence terms and conditions as stated therein apply only in relation to the respective rights holders.

In particular, the appliance contains software components licenced by the copyright holders under the GNU General Public License, Version 2, or the GNU Lesser

General Public License, Version 2.1. For a period of at least 3 years from the date of purchase or delivery of the appliance respectively, Miele offers to provide you or third parties with a machine-readable copy of the source code of the Open Source components contained in the appliance and licenced under the terms of the GNU

General Public License, Version 2, or the GNU Lesser General Public License, Version 2.1, on a data carrier (CD-ROM, DVD or USB stick). Please contact us via email ([email protected]) or the below postal address and state the product name, the serial number and the date of purchase to obtain this source code.

Miele & Cie. KG

Open Source

GTZ/TIM

Carl-Miele-Straße 29

33332 Gütersloh

Please note the limited warranty in favour of the rights holders under the terms of the GNU General Public License, Version 2, and the GNU Lesser General Public License, Version 2.1:

This program is distributed in the hope that it will be useful, but WITHOUT ANY

WARRANTY, without even the implied warranty of MERCHANTABILITY of FITNESS

FOR A PARTICULAR PURPOSE. See the GNU General Public License and GNU

Lesser General Public License for more details.

95

United Kingdom

Miele Co. Ltd.

Fairacres, Marcham Road

Abingdon, Oxon, OX14 1TW

Tel: 0330 160 6600

Internet: www.miele.com

Australia

Miele Australia Pty. Ltd.

ACN 005 635 398

ABN 96 005 635 398

1 Gilbert Park Drive

Knoxfield, VIC 3180

Tel: 1300 464 353

Internet: www.miele.com.au

China

Miele (Shanghai) Trading Ltd.

1-3 Floor, No. 82 Shi Men Yi Road

Jing' an District

200040 Shanghai, PRC

Tel: +86 21 6157 3500

Fax: +86 21 6157 3511

E-mail: [email protected],

Internet: www.miele.cn

Miele (Hong Kong) Limited

41/F - 4101, Manhattan Place

23 Wang Tai Road

Kowloon Bay, Hong Kong

Tel: (852) 2610 1025

Fax: (852) 3579 1404

Email: [email protected]

Website: www.miele.hk

India

Miele India Pvt. Ltd.

Ground Floor

Copia Corporate Suites

Plot No. 9, Jasola

New Delhi - 110025

Tel: 011-46 900 000

Fax: 011-46 900 001

E-mail: [email protected]

Internet: www.miele.in

Ireland

Miele Ireland Ltd.

2024 Bianconi Avenue

Citywest Business Campus

Dublin 24

Tel: (01) 461 07 10

Fax: (01) 461 07 97

E-Mail: [email protected]

Internet: www.miele.ie

Malaysia

Miele Sdn Bhd

Suite 12-2, Level 12

Menara Sapura Kencana

Petroleum

Solaris Dutamas No. 1

Jalan Dutamas 1

50480 Kuala Lumpur, Malaysia

Phone: +603-6209-0288

Fax: +603-6205-3768

New Zealand

Miele New Zealand Limited

IRD 98 463 631

Level 2, 10 College Hill

Freemans Bay, Auckland 1011

New Zealand

Tel: 0800 464 353

Internet: www.miele.co.nz

Singapore

Miele Pte. Ltd.

163 Penang Road

# 04 - 03 Winsland House II

Singapore 238463

Tel: +65 6735 1191

Fax: +65 6735 1161

E-Mail: [email protected]

Internet: www.miele.sg

Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany

South Africa

Miele (Pty) Ltd

63 Peter Place, Bryanston 2194

P.O. Box 69434, Bryanston 2021

Tel: (011) 875 9000

Fax: (011) 875 9035

E-mail: [email protected]

Internet: www.miele.co.za

Taiwan

K.E. & Kingstone Co., Ltd.

6th Fl., No. 120, Sec. 2

Jianguo N. Rd.

Taipei, Taiwan

TEL: +886 2 2502-7256

FAX: +886 2 2502-3077

E-mail: [email protected]

Website: www.kenk.com.tw/ke/miele

Thailand

BHIRAJ TOWER at EmQuartier

43rd Floor Unit 4301-4303

689 Sukhumvit Road

North Klongton Sub-District

Vadhana District

Bangkok 10110, Thailand

United Arab Emirates

Miele Appliances Ltd.

Showroom 1

Eiffel 1 Building

Sheikh Zayed Road, Umm Al Sheif

P.O. Box 114782 - Dubai

Tel. +971 4 3044 999

Fax. +971 4 3418 852

800-MIELE (64353)

E-Mail: [email protected]

Website: www.miele.ae

KWT 2661 ViS, KWT 2671 ViS en-GB M.-Nr. 11 273 080 / 00

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Built-in 91 bottle(s) Number of temperature zones: 3 Black
  • Number of shelves: 10 Number of doors: 1
  • Wine cooler net capacity: 361 L
  • 42 dB
  • 171 kWh
  • Built-in display Interior light Temperature alarm

Related manuals

Download PDF

advertisement

Table of contents