ASSEMBLY INSTRUCTIONS
Model: L-GG001PST-H
SKU: 2721523
Grill Gazebo W/LED
Production Number:
Made In China
&RQJUDWXODWLRQVRQ\RXUSXUFKDVHRIRXU681-2</('OLJKWHGJULOOJD]HER2XUFOHDU
HDV\WRIROORZ VWHSE\VWHSLQVWUXFWLRQVZLOOJXLGH\RXWKURXJKWKHDVVHPEO\
SURFHVVIURPVWDUWWRILQLVK
,03257$17
1. When installing and assembling your gazebo, it is recommended that two or more adults
are involved.
2. Do not use the gazebo during an electrical storm, as there is a remote chance of getting
struck by lightning.
3. Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury,
possibly even death.
4. Do not leave the gazebo assembled when there is a risk of high wind, as possible
damage will occur to the structure.
5. Do not use lanterns that contain open flames.
6. This package contains small items and plastic bags that should be kept away from
children.
7. Ensure that all connectors & poles are firmly secured in position fully. It is important to do
so before use so as to avoid collapsing or damage to the item, which could result in injury.
8. .((3$//)/$0($:$<)5207+,66+( /7(5)$%5,&The fabric may burn if it is
exposed to prolonged contact with a flame source. The application of any foreign substance
to the fabric may render the flame-resistant properties ineffective.
86( &$5(
1. This gazebo is not a permanent structure. The canopy top should never be left on during
periods of extended or heavy rain nor any inclement weather where high winds or wind
gusts can occur. If left up, damage to the gazebo and surroundings can occur.
2. Do not repack your gazebo until completely dry.
3. Steel components for garden accessories and furniture are treated with rust inhibiting
paint that protects them from rust. However, due to the nature of steel, surface oxidation
(rusting) will occur if this protective coating is scratched. This is a natural process. To
minimize this condition, it is recommended that care be taken when assembling and
handling the product in order to prevent the paint from being scratched. Surface rust can be
removed easily using a very light application of common cooking oil. If surface oxidation
(rusting) occurs and no measures are taken to correct it, the oxidation may start dripping
onto the deck or patio, which may cause damaging stains that may be difficult to remove.
Production Number:
Made In China
Parts List
Post (1)
A1
2
P11117B01106
Post (2)
A2
1
P11118B01106
Post (3)
A3
1
P11119B01106
Big Beam
B
4
P10
Big Connector
C
1
P10389A01106
Small Beam
D
4
P10238A01106
Long Screen
E
2
P11094B01106
Short Screen
F
2
P11095B01106
Panel 1
G1
1
P12326A01106
Panel 2
G2
1
P12327A01106
Hook rack
H
1
P13706A01106
Bolt 1
I
28
P90804A07106
Bolt 2
II
3
P90801B07106
Big Canopy
J
1
P00114L06036
Small Canopy
K
1
P00115L06036
Hook
L
1
P12601A01106
LED Light
M
4
P13502A07000
Diagonal support
bar
N
4
P11873A01106
Production Number:
Made In China
)LJ Attach the Long Screen (E) and the Short Screen (F) to Post (A1ǃA2ǃA3) with the Bolt 1 (I).
)LJ Attach the Big Beam (B) to the Big Connector (C), attach the Hook (L) to the Big Connector (C).
)LJ Insert the lower connector tube of the Big Beam (B) into the upper tube of Post (A1ǃA2ǃA3),
then put the Big Canopy (J) on big top, do not fully spread.
)LJInsert the lower connector tube of Small beam (D) into the upper tube of Big beam (B).
)LJ Extend the Small Canopy (K) onto the small top by fixing the canopy at four corners of Small Beam (D).
)LJ Take off the back cover of LED light (M), and match 3 pieces AAA batteries into sockets. Attach back
cover to LED light (M). 1RWH%DWWHULHVDUHQRWLQFOXGHG
)LJ Hang the assembled LED light (M) into holes of Big Beam (B) (Note: Pull down forward tightly after
LED lights hung into Beam holes).
Production Number:
Made In China
Hardware Pack 2
FF
6X180MM Stake
8PCS
P12406C01002
Fig.7: Extend the Big Canopy (J) onto the big top by fixing the canopy at four corners of Big Beam (B).
Fig.7-1 : Attach the Hook rack (H) to Panel 2(G2) with the Bolt 2 (II).
Fig.8: Attach the Panel (G1&G2) to the Post (A1, A2, A3) tightly with the Bolt 1 (I).
Fig.9: Attach the Panel (G1&G2) and Diagonal support bar (N) to the Post (A1, A2, A3) with Bolt 1 (I)
Fig.10:
Fix the gazebo to the lawn by using the Stake (FF).
Your grill g azebo is now ready for use.
Please do not return this product to the store. For technical assistance on assembly or
replacement parts call Sunjoy Group at 1(866) 578-6569 DQ\WLPH
or Email [email protected] or visit www.sunjoyonline.com to place your order
or fax your parts replacement order form together with your purchase receipt to
1 (740) 283-3549 for assistance.
Production Number:
Made In China
">