Canarm CNFRMC5 Speed Control for 4 Ceiling Fans Owner's Manual
Canarm CNFRMC5 is a speed control device designed for industrial ceiling fans. It allows you to adjust the fan speed from minimum to full, and change the direction of rotation from updraft to downdraft. The control has a minimum speed adjustment feature that ensures the fan runs with sufficient torque to prevent stalling. Installation requires a qualified electrician and grounding the device is necessary. For service or inquiries, contact Canarm Service during business hours or visit their website.
Advertisement
Advertisement
Advertisement
Frequently asked questions
The CNFRMC5 control is designed to adjust the speed of Canarm Ltd. industrial fans.
To adjust the minimum speed:
1) Turn the main control knob clockwise to the lowest speed position.
2) Locate and adjust the minimum speed setting on the front plate with a screwdriver.
3) Rotate the screwdriver clockwise to decrease the minimum speed or counter-clockwise to increase the minimum speed.
If the fan stops on its own, the minimum speed setting is too low. Adjust the minimum speed setting clockwise to increase the minimum speed.
To change the direction of the fan, slide the switch from left to right.
A qualified electrician should install the CNFRMC5 control in accordance with the national electrical code and other local codes.
Yes, the CNFRMC5 control must be grounded when installed.
The warranty period for the CNFRMC5 control is 12 months from the purchase date.
The warranty excludes any damage caused by overload, short circuit, misuse, act of vandalism, fortuitous events, acts of God, flood, fire, hail or natural disaster.