HARDWARE PACK
Chair Hardware Pack:
1.
1. BARREL BOLTS:
(12) 1.5”, (2) 2.5”
2. BARREL NUTS: (14)
2.
3. Hex Key (Not Shown)
Additional Rocker Hardware Pack:
1. BARREL BOLTS:
(4) 1.5”
COASTAL COLLECTION
2. BARREL NUTS: (4)
CHAIR & ROCKER
SUGGESTED TOOLS
ROPE OR CUSHIONED
I N ST R U C T I O N S
NOTE. Instructions not to scale.
Example does not show rope or cushion
• RUBBER MALLET
• PHILLIPS HEAD
SCREWDRIVER
ASSEMBLY
STEP 1. Use (6) 1.5” barrel bolts and (6) barrel nuts to attach
arm assemblies to rear and front arm support.
NOTE. do not tighten bolts until Step 5.
STEP 2. Use (2) 2.5” barrel bolts, (6) 1.5” barrel bolts, and (8) barrel
nuts to attach arm assemblies & supports to inside of chair frame.
1.5” BARREL
BOLTS
BARREL NUTS
2.5” BARREL
BOLT
1.5” BARREL
BOLTS
BARREL NUTS
2.5” BARREL
BOLT
1.5” BARREL
BOLTS
BARREL
NUT
BARREL NUTS
1.5” BARREL
BOLTS
ROCKER ASSEMBLY
STEP 2. Use (4) 1.5” barrel bolts and (4) barrel nuts to attach
rockers to legs.
Congratulations on purchasing this Coastal Collection Chair & Rocker with Rope or Cushion.
QUESTIONS REGARDING THIS PRODUCT? Call our customer service team,
1-800-344-6433.
WARRANTY & RETURNS - Pawleys Island Hammocks products are guaranteed to be free of defects in both
workmanship and material. Prolonged exposure to weather conditions including snow, rain, and humidity are not
covered under the warranty, nor is damaged caused by normal wear, mildew, or improper care, including storage,
maintenance, and assembly. If you are not satisfied with an item, return it unused in its original packaging for a
complete refund or exchange. You can return it to any of our stores or to our warehouse, Nags Head hammocks,
305 Industrial Blvd., Greenville, NC 27834. Please include a copy of your receipt and your contact information.
BARREL
NUTS
1.5” BARREL
BOLTS
BARREL NUTS
1.5” BARREL
BOLTS
">
