Vizio E191VA User guide

Vizio E191VA User guide
MODELS
MODELS
// E3D320VX
// E3D420VX
// E3D470VX
E191VA
USER
GUIDE
INSTALLING YOUR new TV
CONTROLS & CONNECTIONS
CONNECTING YOUR DEVICES
USING THE ON-SCREEN MENU
USING THE USB MEDIA PLAYER
TROUBLESHOOTING & SUPPORT
SPECIFICATIONS, SAFETY & LEGAL
This product qualifies for ENERGY STAR in the “factory
default” setting and this is the setting in which power
savings will be achieved. Changing the factory default
picture settings or enabling other features will increase
power consumption that could exceed the limits
necessary to qualify for ENERGY STAR rating.
®
SRS StudioSound HD and SRS TruVolume
are trademarks of SRS Labs, Inc.
StudioSound
HD
and
TruVolume
technologies are incorporated under
license from SRS Labs, Inc.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol
are
trademarks
of
Dolby
Laboratories.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC.
Table of Contents
Installing the TV................................................. 8
Adjusting the Advanced Picture Settings......................... 24
Inspecting the Package Contents...................................... 8
Adjusting the Color Temperature..................................... 25
Installing the TV.................................................................... 8
Adjusting the Picture Size and Position............................ 25
Installing the TV Stand...................................................... 8
Resetting the Picture Settings .......................................... 26
Installing the Base............................................................. 9
Adjusting the Audio Settings............................................... 26
Removing the Base........................................................... 9
Adjusting the Advanced Audio Settings.......................... 27
Installing the TV on a Wall................................................. 10
Resetting the Audio Settings............................................. 27
Changing the TV Settings.................................................... 28
Controls and Connections............................... 11
Changing the Input Source.............................................. 28
Rear Panel........................................................................... 11
Setting the Tuner Mode..................................................... 28
Side Panel............................................................................ 12
Scanning for Channels..................................................... 28
Front Panel........................................................................... 13
Adding New Channels..................................................... 29
Remote Control................................................................... 14
Skipping Channels........................................................... 30
Replacing the Batteries.................................................... 15
Changing the Audio Language....................................... 30
Connecting Your Devices.................................. 16
Using the Parental Controls.............................................. 31
Connecting A Device.......................................................... 16
Accessing the Parental Controls Menu............................ 31
Connecting an Audio Device............................................. 17
Enabling or Disabling Program Ratings............................ 31
Connecting A PC................................................................. 18
Locking and Unlocking Channels.................................... 31
Blocking and Unblocking Content by Rating................... 32
Completing the First-Time Setup....................... 19
Changing the Parental Control Passcode....................... 32
Using the On-Screen Menu............................... 20
Resetting the Content Locks............................................. 32
Navigating the On-Screen Menu........................................ 20
Changing the Names of the Inputs................................. 33
Changing the Input Source................................................ 21
Changing the On-Screen Menu Language..................... 33
Changing the Screen Aspect Ratio.................................... 21
Setting the Time Zone....................................................... 34
Setting Up Closed Captioning............................................ 22
Adjusting the CEC Settings............................................... 34
Changing the Appearance of Digital Closed Captions.. 22
Using the Help Menu........................................................... 35
Activating the Sleep Timer................................................... 23
Displaying System Information......................................... 35
Setting the Auto Power Off Feature................................... 23
Resetting the TV Settings................................................... 35
Adjusting the Picture Settings............................................. 23
Restoring the TV to Factory Default Settings..................... 36
1

Using the Setup Wizard..................................................... 36
Using the Info Window......................................................... 37
Using the USB Media Player.............................. 38
Using the USB Media Player................................................. 38
Connecting a USB Thumb Drive to the TV......................... 38
Viewing a USB Photo Slideshow........................................ 38
Troubleshooting & Technical Support............... 40
Specifications.................................................... 43
Limited Warranty................................................ 45
2
Welcome

Thank You for Choosing VIZIO
Important Safety Instructions
And congratulations on your new VIZIO HDTV.
Your TV is designed and manufactured to operate within defined
design limits. Misuse may result in electric shock or fire. To prevent
your TV from being damaged, the following instructions should
be observed for the installation, use, and maintenance of your
TV. Read the following safety instructions before operating your
TV. Keep these instructions in a safe place for future reference.
To get the most out of your new VIZIO product, read these
instructions before using your product and retain them for future
reference. Be sure to inspect the package contents to ensure
there are no missing or damaged parts.
Product Registration
To purchase or inquire about accessories and installation services
for your VIZIO product, visit our website at www.VIZIO.com or call
toll free at (877) 878-4946.
We recommend that you either:
• To reduce the risk of electric shock or component
damage, switch off the power before connecting other
components to your TV.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Register your VIZIO product at www.VIZIO.com
• Follow all instructions.
• Complete and mail the enclosed registration card
• Do not use this apparatus near water.
Extended Warranties
For peace of mind, and to protect your investment beyond the
standard warranty, VIZIO offers on-site extended warranty service
plans. These plans provide additional coverage during the
standard warranty period. To purchase an extended warranty
service plan, visit www.VIZIO.com.
When Reading this Manual
When you see this symbol, please read the
accompanying important warning or notice. It is
intended to alert you to the presence of important
operating instructions.
When you see this symbol, please read the
accompanying helpful tip.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
• Only use attachments/accessories specified by the
manufacturer.
• Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in
any way, such as when the power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally or has been
dropped.
• Unplug the power cord before cleaning your TV.
• When moving your TV from an area of low temperature
to an area of high temperature, condensation may form
in the housing. Wait before turning on your TV to avoid
causing fire, electric shock, or component damage.
• Do not apply pressure or throw objects at your TV.
This may compromise the integrity of the display. The
manufacturer’s warranty does not cover user abuse or
improper installations.
• The power cord must be replaced when using different
voltage than the voltage specified. For more information,
contact your dealer.
• Your TV is equipped with a three-pronged grounded plug
(a plug with a third grounding pin). This plug will fit only
into a grounded power outlet. This is a safety feature. If
your outlet does not accommodate the three-pronged,
have an electrician install the correct outlet, or use an
adapter to ground your TV safely. Do not defeat the safety
purpose of the grounded plug.
• When connected to a power outlet, power is always
flowing into your TV. To totally disconnect power, unplug
the power cord.
• A distance of at least three feet should be maintained
between your TV and any heat source, such as a radiator,
heater, oven, amplifier etc. Do not install your TV close to
smoke. Operating your TV close to smoke or moisture may
cause fire or electric shock.
• The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of un-isolated, dangerous voltage within the
inside of your TV that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
• Slots and openings in the back and bottom of the
cabinet are provided for ventilation. To ensure reliable
operation of your TV and to protect it from overheating,
be sure these openings are not blocked or covered. Do
not place your TV in a bookcase or cabinet unless proper
ventilation is provided.
• The wall socket should be installed near your TV and
easily accessible.
• Never push any object into the slots and openings on
your TV cabinet. Do not place any objects on the top of
your TV. Doing so could short circuit parts causing a fire
or electric shock. Never spill liquids on your TV.
• Your TV should be operated only from the type of power
source indicated on the label. If you are not sure of the
type of power supplied to your home, consult your dealer
or local power company.
• Do not overload power strips and extension cords.
Overloading can result in fire or electric shock.
• Only power of the marked voltage can be used for your
TV. Any other voltage than the specified voltage may
cause fire or electric shock.
• Do not touch the power cord during lightning. To avoid
electric shock, avoid handling the power cord during
electrical storms.
• Unplug your TV during a lightning storm or when it will not
be used for long period of time. This will protect your TV
from damage due to power surges.
• Do not attempt to repair or service your TV yourself.

Opening or removing the back cover may expose you to
high voltages, electric shock, and other hazards. If repair
is required, contact your dealer and refer all servicing to
qualified service personnel.
• WARNING: Keep your TV away from moisture. Do not
expose your TV to rain or moisture. If water penetrates into
your TV, unplug the power cord and contact your dealer.
Continuous use in this case may result in fire or electric
shock.
• Do not use your TV if any abnormality occurs. If any
smoke or odor becomes apparent, unplug the power
cord and contact your dealer immediately. Do not try to
repair your TV yourself.
• Avoid using dropped or damaged appliances. If your
TV is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power
cord immediately and contact your dealer for repair.
Continued use of your TV may cause fire or electric
shock.
• Do not install your TV in an area with heavy dust or high
humidity. Operating your TV in environments with heavy
dust or high humidity may cause fire or electric shock.
• Follow instructions for moving your TV. Ensure that the
power cord and any other cables are unplugged before
moving your TV.
• When unplugging your TV, hold the AC/DC power
adapter, not the cord. Pulling on the power cord may
damage the wires inside the cord and cause fire or
electric shock. When your TV will not be used for an
extended period of time, unplug the power cord.
• To reduce risk of electric shock, do not touch the
connector with wet hands.
• Insert batteries in accordance with instructions. Incorrect
polarities may cause the batteries to leak which can
damage the remote control or injure the operator. Do not
expose batteries to excessive heat such as sunshine, fire
or the like.
• If any of the following occurs, contact the dealer:
- The power cord fails or frays.
- Liquid sprays or any object drops into your TV.
- Your TV is exposed to rain or other moisture.
- Your TV is dropped or damaged in any way.
- The performance of your TV changes substantially.
• This apparatus shall not be exposed to dripping or
splashing and no objects fill with liquids, such as vases,
shall be placed on the apparatus.
• The mains plug or appliance coupler is used as the
disconnect device, the disconnect device shall remain
readily operable.
• CAUTION - These servicing instructions are for use by
qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than
that contained in the operating instructions unless you
are qualified to do so.
h
• T he lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated DANGEROUS VOLTAGE within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electrical shock to persons.

DTV Transition Advisory
The nationwide switch to digital television broadcasting was
complete on June 12, 2009. Analog-only television sets that
receive TV programming through an antenna now need a
converter box to continue to receive over-the-air TV. Watch your
local stations to find out when they will turn off their analog
signal and switch to digital-only broadcasting. Analog-only TVs
should continue to work as before to receive low power, Class
A or translator television stations and with cable and satellite
TV services, gaming consoles, VCRs, DVD players, and similar
products.
For additional information, please contact the parties listed
below, as appropriate:
FCC (US Federal Communications Commission)
Web: www.fcc.gov
Phone: 1-888-CALL-FCC (1-888-225-5322)
TTY: 1-888-TELL-FCC (1-888-835-5322)
Fax: 1-866-418-0232
E-mail: [email protected]
NTIA (National Telecommunications and Information
Administration)
Web: www.ntia.doc.gov
Phone: 1-888-DTV-2009 (1-888-388-2009)
List of US Television Stations
www.high-techproductions.com/usTVstations.htm
Your TV comes with a built-in tuner capable of
processing digital broadcasts. No extra converter
box is needed.

Television Antenna Connection Protection
If an outside antenna/satellite dish or cable system is to be
connected to the TV, make sure that the antenna or cable system
is electrically grounded to provide some protection against
voltage surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of the grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
Ground Clamp
Lightning Protection
For added protection of the TV during a lightning storm or when
it is left unattended or unused for long periods of time, unplug
the TV from the wall outlet and disconnect the antenna or cable
system.
Power Lines
Do not locate the antenna near overhead light or power circuits,
or where it could fall into such power lines or circuits. Remember,
the screen of the coaxial cable is intended to be connected to
earth in the building installation.
Antenna Lead In Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Electric Service Equipment
Power Service Grounding Electrode
System
(NEC ART 250, part H)
1
Installing the TV
Inspecting the Package Contents
Installing the TV
Before installing your new TV, take a moment to inspect the
package contents. Use the images below to ensure nothing is
missing or damaged.
After removing the TV from the box and inspecting the package
contents you can begin installing the TV. Your TV can be installed
in two ways:
• On a flat surface, using the included stand
• On a wall, using a VESA-standard wall mount (not
included)
Installing the TV Stand
Your TV includes a stand designed to support the weight of the
TV and keep it from falling over. However, the TV can still fall over if:
• It is placed on an uneven, unstable, or non-level surface
• It is pushed, pulled, or otherwise improperly moved
• If an earthquake occurs and the TV is not properly
secured
VIZIO LED HDTV
Quick Start Guide
Remote Control with Batteries
Package Contents
TV on Stand
8
1
Installing the Base
Removing the Base
1
1
Slots on
TV
Gently lift
this tab
If you plan to wall mount the TV, you will need to remove the base.
Align the 8 tabs on the base with the 8 slots on the bottom of the TV.
To remove the base, gently lift the wide tab.
2
2
Press here
while sliding forward.
Press down on one side of the base and gently slide forward until you
feel it click into place.
While gently lifting the tab, gently slide one side of the base away from
TV.
3
3
Press here
while sliding forward.
Press down on the other side of the base and gently slide forward
until you feel it click into place.
Gently slide the other side of the base away from the TV.
Base installation is complete.
9
1
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult
the information below to find the appropriate mount for your TV
model:
Installing a TV on a wall requires lifting. To prevent
injury or damage to the TV, ask someone to help you.
E191VA
Screw Size:
Screw Length:
Screw Pitch:
Hole Pattern:
M4
10mm
0.7mm
75mm (V) x
75mm (H)
Be sure the mount you choose is capable of supporting the
weight of the TV. After you have determined that you have the
correct mount for your TV, you can begin the installation.
To install your TV on a wall:
1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, flat, stable surface.
Be sure the surface is clear of debris that can scratch or
damage the TV.
3. Remove the base by loosening and removing the screws.
4. Attach your TV and wall mount to the wall, carefully following
the instructions that came with your mount.
Use only with a UL-listed wall mount bracket rated for the
weight/load of this TV. See Appendix B - Specifications for the
weight of this TV.
10
2
Controls and Connections
Rear Panel
HDMI - Connect HDMI device.
PC Audio In - Connect 3.5mm PC audio cable.
RGB - Connect RGB cable to PC.
Coaxial - Connect coaxial cable from cable,
satellite, or antenna.
H D M I( B E S T )
DTV/TV
RGB (PC)
A U D IO
3.5mm Audio - Connect headphones powered
speakers, or other 3.5mm audio device.
A U D IO O U T
CABLE/ANTENNA
RGB PC
A U D IO
OU T
1
(A R C )
USB 2.0 - Connect USB thumb drive to play photo
slideshow or to update firmware.
US B
Y /V
Pb /Cb
C O M P O S IT E ( G O O D )
Pr /Cr
COMPONENT (BETTER)
L
R
US B
Note: The image shown here is
for illustrative purposes only and
may be subject to change. The
actual number of ports and their
locations may vary, depending on
the model.
Component/Composite - Connect component or
composite device.
Rear Panel
11
2
Side Panel
POWER - Turn TV off or on.
MENU - Open the on-screen menu.
CHANNEL UP/DOWN - Change the channel.
VOLUME UP/DOWN - Increase or decrease volume level.
INPUT - Change input source.
Side Panel
12
2
Front Panel
REMOTE SENSOR
When using the remote, aim it directly at this sensor.
Front Panel
13
2
Remote Control
Input
Change the currently-displayed input.
Power
Turn TV on or off.
A/V Controls
Control USB photo viewer.
Info
Display the info window.
Closed Captions
Open the closed caption menu.
Menu
Display the on-screen menu.
Exit
Close the on-screen menu.
Arrow
Navigate the on-screen menu.
Ok
Select the highlighted menu option.
Guide
Display the info window.
Back
Go to the previous on-screen menu.
V Button
Open the USB photo viewer.
Channel Up/Down
Change the channel.
Volume Up/Down
Increase or decrease loudness of the audio.
Last
Return to the channel last viewed.
Mute
Turn the audio off or on.
Dash
Use with number pad to manually enter
a digital sub-channel. (For example,
18-4 or 18-5.)
Number Pad
Manually enter a channel.
WIDE
Switch the display mode.
Remote Control
14
2
Replacing Batteries
Replacing the Batteries
1. Remove the battery cover.
2. Insert two batteries into the remote control. Make sure that
the (+) and (-) symbols on the batteries match the (+) and
(-) symbols inside the battery compartment.
3. Replace the battery cover.
• Use only good quality batteries.
• Inserting the batteries incorrectly may result in
cracking or leakage that may cause a fire or
result in injury.
• Dispose of old or dead batteries in accordance
with local hazardous waste regulations.
• Keep batteries away from children and pets.
15
3
Connecting Your Devices
Connecting A Device
Your TV can be used to display output from most devices.
1. Verify that your device has a video port that matches an
available port on the TV (HDMI, Component, etc).
Cable/Satellite Box
2. Turn the TV and your device off.
3. Connect the appropriate cable (not included) to the TV and
the device.
4. Turn the TV and your device on. Set the TV’s input to match
the connection you used (HDMI, Component, etc).
DVD/Blu-ray Player
HDMI CABLE
BEST
Game Console
• DIGITAL
• HD VIDEO (1080p)*
• HD AUDIO
COMPONENT CABLE • ANALOG
• HD VIDEO (1080p)*
• STEREO AUDIO
BETTER
H D M I( B E S T )
DTV/TV
RGB (PC)
A U D IO
A U D IO O U T
CABLE/ANTENNA
RGB PC
A U D IO
OU T
1
(A R C )
US B
Y /V
Pb /Cb
C O M P O S IT E ( G O O D )
Pr /Cr
COMPONENT (BETTER)
L
R
AV CABLE
US B
GOOD
• ANALOG
• VIDEO (480i)*
• STEREO AUDIO
* Maximum Resolution
Note: The image shown here is for illustrative purposes only and may be
subject to change. The actual number of ports and their locations may
vary, depending on the model.
Connecting a Device
16
3
Connecting an audio device
Your TV can output sound to an audio device, such as a receiver
or sound bar.
1. Verify that your device has a audio port that matches an
available port on the TV (Optical, etc).
Home Audio Receiver
2. Turn the TV and your audio device off.
3. Connect the appropriate cable (not included) to the TV and
the device.
4. Turn the TV and your device on.
VIZIO Sound Bar
3.5mm Cable
H D M I( B E S T )
DTV/TV
RGB (PC)
A U D IO
A U D IO O U T
CABLE/ANTENNA
RGB PC
A U D IO
OU T
1
(A R C )
US B
Y /V
Pb /Cb
C O M P O S IT E ( G O O D )
Pr /Cr
COMPONENT (BETTER)
L
R
US B
Note: The image shown here is for illustrative purposes only
and may be subject to change. The actual number of ports
and their locations may vary, depending on the model.
Connecting an Audio Device
17
3
Connecting A PC
Your TV can be used to display output from a personal computer.
To use your TV as a PC display:
1. Connect an RGB cable (not included) to your PC and the
RGB port on the back of the TV. This cable transmits video.
2. Connect a 3.5mm cable (not included) to your PC and the
PC Audio In port on the back of the TV. This cable transmits
audio.
3. Set your PC’s resolution to match the resolution of your TV.
See Appendix B - Specifications.
Personal Computer
3.5mm Cable (For Audio)
RGB Cable (For Video)
H D M I( B E S T )
DTV/TV
RGB (PC)
A U D IO
A U D IO O U T
CABLE/ANTENNA
RGB PC
A U D IO
OU T
1
(A R C )
US B
Y /V
Pb /Cb
C O M P O S IT E ( G O O D )
Pr /Cr
COMPONENT (BETTER)
L
R
US B
Note: The image shown here is for illustrative purposes only and may be
subject to change. The actual number of ports and their locations may
vary, depending on the model.
Connecting a PC
18
4
Completing the First-Time Setup
4. Use the OK and Arrow Up/
Down buttons on the remote to
highlight your time zone and
press OK.
The first time you turn on the TV, the Setup App will guide you
through each of the steps necessary to get your TV ready for use.
Before you begin the first-time setup:
• Your TV should be installed and the power cord should
be connected to an electrical outlet. See Installing the TV
on page 8.
• Have your remote ready. Ensure the batteries are inserted.
5. Use the OK and Arrow Up/
Down Buttons on the remote to
turn daylight saving time On or
Off.
• Your devices should be connected. See Connecting A
Device on page 16.
To complete the first-time setup:
1. Press the Power/Standby
button on the remote. The TV
powers on and the Setup App
starts.
6. Answer the on-screen
questions about your TV
connection using the Arrow
and OK buttons on the remote.
2. Use the Up/Down Arrow
buttons on the remote to
highlight your preferred
language and press OK.
7. Use the Arrow buttons to
highlight Start the Channel
Scan and press OK.
3. Use the OK and Arrow Up/
Down buttons on the remote
to highlight Home Mode and
press OK.
When you have finished the
channel scan, highlight Exit to
Live TV and press OK.
The First-Time Setup is complete.
19
5
Using the On-Screen Menu
Your TV features an easy-to-use on-screen menu.
To open the on-screen menu, press the MENU button on the
remote.
From this menu, you can:
• Change the screen aspect
ratio
ABC
Input
Wide
MENU
Sleep
Timer
Picture
OK
GUIDE
BACK
While navigating the on-screen menu, you can press
the BACK button at any time to return to the previous
menu screen. The EXIT button will close the on-screen
VOL
menu.
• Adjust the picture settings
• Change TV settings
To open the on-screen menu, press
EXIT
the MENU button on the remote.
CC
• Activate the sleep timer
• Adjust the audio settings
INFO
Use the Arrow buttons to highlight
a menu option, and press the OK
button to select that option.
• Change the input source
• Set up closed captioning
Navigating the On-Screen Menu
CC
Audio
CH
• Access USB photo slideshow
• Access the help menu
VOL
?
Media
Settings
CH
Help
Menu to adjust TV Picture Controls
EXIT
20
1
2
3
4
5
6
7
8
9
WIDE
0
5
Changing the Input Source
Changing the Screen Aspect Ratio
External devices such as DVD players, Blu-Ray Players, and video
game consoles can be connected to your TV. To use one of these
devices with your TV, you must first change the input source in the
on-screen menu.
The TV can display images in four different modes: Wide, Zoom,
Normal, and Stretch. Each mode displays the picture differently.
To change the input device:
1. Press the MENU button on the
remote.
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons to
highlight the Wide icon. Press
OK.
Input Source Selection
TV
2. Use the Arrow buttons on the
remote to highlight the Settings
icon and press OK. The TV
Settings menu is displayed.
AV
Screen Mode
Wide
Zoom
Normal
Panoramic
3. Use the Arrow buttons to highlight your desired screen mode
and press OK:
Component
HDMI 1
• Normal preserves the content’s original aspect ratio.
Since the 4:3 aspect ratio is not large enough to fill the
TV’s screen, black bars are added to the left and right of
the display image.
RGB
3. Use the Up/Down Arrow
buttons on the remote to
highlight the input source and
press OK. The Input Source
Selection menu is displayed.
4. Use the Up/Down Arrow
buttons on the remote to
highlight the input source you
wish to display and press OK.
To change the screen aspect ratio:
• Wide stretches a 4:3 aspect ratio picture to the edges
of the screen. Since the picture is being stretched, the
display image may appear distorted. If the program
is already formatted for widescreen viewing (1.85:1 or
2.35:1), then black bars will appear on the top and
bottom of the display image.
Watch TV from your Antenna or Cable
out-of-the-wall.
• Zoom expands images with black bars to fit the screen.
• Panoramic expands the display image to fill the screen.
Images may appear wider than intended. If you are
watching widescreen (1.85:1 or 2.35:1) content, black
bars will still appear on the top and bottom of the display
image. This option is only available when the TV is
displaying a 480i/480p source.
EXIT
21
5
Setting Up Closed Captioning
Changing the Appearance of Digital Closed Captions
Your TV can display closed captions for programs that include
them. Closed captions display a transcription of a program’s
dialogue.
To change the appearance of digital closed captions:
1. From the Closed Caption
menu, use the Arrow buttons to
highlight Digital CC Style.
If the program you are viewing is not being broadcast
with closed captions, the TV will not display them.
2. Use the Left/Right Arrow
buttons on the remote to select
Custom, then press OK. The
Digital CC Style menu appears.
To activate or deactivate closed
captions:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
Digital closed captions can be displayed according to your
preference.
Closed Caption
Analog Closed Caption
Off
2. Use the Arrow buttons on the
remote to highlight the CC
icon and press OK. The Closed
Caption menu is displayed.
3. Use the Up/Down Arrow
buttons on the remote to
highlight the setting you wish
to change, then use the Left/
Right Arrow buttons to change
the setting:
3. Use the Arrow buttons on the
remote to highlight the type
of closed captions you wish to
see:
• Caption Style - Choose
Auto to keep default
settings or Custom to
manually change each
setting.
• Analog Closed Caption for
analog (NTSC) TV channels.
• Digital Closed Caption for
digital (ATSC) TV channels.
Digital Closed Caption
Digital CC Style
Off
As Broadcast
Digital CC Style
Caption Style
As Broadcast
Text Size
As Broadcast
Color
As Broadcast
Opacity
As Broadcast
BG Color
As Broadcast
BG Opacity
As Broadcast
Window Color
As Broadcast
Window Opacity
As Broadcast
Select either as Broadcast Captioning or
Custom to change size, color etc...
EXIT
• Text Size - Adjust the size of the text.
Select Analog Closed Caption modes
• Color - Change the color of the text.
• Opacity - Change the transparency of the text.
EXIT
4. After highlighting the type of closed captions you wish to
see, use the Left/Right Arrow buttons on the remote to select
the caption channel you wish to display, then press EXIT.
• BG Color - Change the background color.
• BG Opacity - Change the transparency of the
background.
• Window Color - Change the edge color.
Caption channels usually display different languages.
For example, CC1 may display English captions and
CC2 may display Spanish captions.
• Window Opacity - Change the edge type.
4. When you are satisfied with the appearance of the closed
captions, press the EXIT button on the remote.
22
5
Activating the Sleep Timer
Adjusting the Picture Settings
When activated, the TV’s sleep timer will turn the TV off after a set
period of time.
Your TV display can be adjusted to suit your preferences and
viewing conditions.
To use the sleep timer:
To adjust the picture settings:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight the Sleep
Timer icon and press OK. The
Sleep Timer menu is displayed.
Sleep Timer
Off
Timer
Auto Power Off
2. Use the Arrow buttons on the
remote to highlight the Picture
icon and press OK. The Picture
Settings menu is displayed.
10 min.
3. Use the Up/Down Arrow
buttons on the remote to
highlight Timer and press OK.
The Timers menu is displayed.
4. Use the Up/Down Arrow
buttons on the remote to
highlight the period of time
after which you want the TV to
turn off: 30, 60, 90, 120, or 180
minutes.
5. Press OK, then press EXIT.
3. Use the Up/Down Arrow
buttons on the remote to
highlight Picture and press OK.
The Picture Settings menu is
displayed.
4. Use the Arrow buttons on the
remote to highlight Picture
Mode, then use the Left/Right
Arrow buttons to change the
picture mode:
Select the period of time before TV
shuts off automatically
EXIT
Setting the Auto Power Off Feature
To help save energy, your TV is set by default to turn off after 10
minutes if no signal is being displayed on the screen. This feature
can be deactivated.
To set the Auto Power Off feature:
• Standard mode sets the
various picture settings to
values that will produce
the best picture in the
most cases. This is the
recommended setting.
Picture
Picture Mode
Standard
Backlight
85
Brightness
50
Contrast
60
Color
60
Tint
0
Sharpness
8
More
Select Picture Mode: Custom, Standard,
Movie, Golf etc...
EXIT
• Movie mode sets the picture settings to values perfect for
watching a movie in a dark room.
• Game mode optimizes the picture settings for displaying
game console output.
1. From the Sleep Timer menu, use the Up/Down Arrow buttons
on the remote to highlight Auto Power Off and press OK. The
Auto Power-Off menu is displayed.
• Vivid mode sets the picture settings to values that
produce a brighter, more vivid picture.
2. Highlight Off or 10 min and press OK. Press Exit.
23
5
Adjusting the Advanced Picture Settings
• Football, Golf, Basketball, and Baseball modes optimize
the picture settings for their respective sports. Also try
these modes for other sports.
To adjust the advanced picture
settings:
• Custom picture mode allows you to manually change
each of the picture settings:
1. From the Picture Settings menu,
use the Arrow buttons on the
remote to highlight More, then
press OK.
Backlight - Adjusts the brightness to affect the overall
brilliance of the picture. See Adjusting the Advanced
Picture Settings on page 24.
2. Use the Arrow buttons on the
remote to highlight Advanced
Picture, then press OK. The
Advanced Picture menu is
displayed.
Brightness - Adjusts the black level of the picture.
When this setting is too low, the picture may be too
dark to distinguish details. When this setting is too
high, the picture may appear faded or washed out.
Contrast - Adjusts the white level of the picture. When
this setting is too high, the picture may appear dark.
When this setting is too low, the picture may appear
faded or washed out. If the setting is too high or too
low, detail may be difficult to distinguish in dark or
bright areas of the picture.
Advanced Picture
Noise Reduction
Low
MPEG NR
Low
Normal
Color Enhancement
Adaptive Luma
Medium
Film Mode
Auto
Backlight Control
OPC
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow to change the setting:
Color - Adjusts the intensity of the picture colors.
Tint - Adjusts the hue of the picture. This setting is
useful in adjusting the flesh tones in the picture. If flesh
appears too orange, reduce the level of color before
adjusting tint.
Sharpness - Adjusts the edge sharpness of picture
elements. It can be used to sharpen non-HD (high
definition) content; however, it will not produce detail
that does not otherwise exist.
• Noise Reduction Diminishes artifacts in
the image caused by the
digitizing of image motion
content. Select Off, Low,
Medium, or High.
Reduce Background Picture Noise when
present
EXIT
• Color Enhancement - Reduces oversaturation of some
colors and improves flesh tones. Select Off, Normal, Rich
Color, Green/Flesh, and Green/Blue.
• Adaptive Luma - Adjusts the average brightness of the
picture to compensate for large areas of brightness.
Select Off, Low, Medium, Strong, or Extend.
• Film Mode - Optimizes the picture for watching film.
Select Auto or Off.
• Backlight Control - Select Off or OPC.
4. When you have finished adjusting the Advanced Picture
Settings, press the EXIT button on the remote.
24
5
Adjusting the Color Temperature
Adjusting the Picture Size and Position
Adjusting the color temperature will change the “warmness” or
“coolness” of the white areas of the picture.
When displaying an image from the HDMI or RGB input, the size
and position of the display image can be adjusted.
To adjust the color temperature:
To adjust the picture size and position:
1. From the Picture Settings Menu,
use the Arrow buttons to
highlight More, then press OK.
1. Ensure the input is set to HDMI
or RGB.
2. Use the Arrow buttons on
the remote to highlight Color
Temperature, then press OK.
The Color Temperature menu is
displayed.
3. Use the Arrow buttons on
the remote to highlight Color
Temperature, then use the
Left/Right Arrow buttons to
change the color temperature
preset:
• Cool produces a blue-hued
picture.
Color Temperature
Color Temperature
2. From the Picture Settings menu,
use the Arrow buttons on the
remote to highlight More, then
press OK.
Custom
Red Gain
50
Green Gain
50
Blue Gain
50
Red Offset
50
Green Offset
50
Blue Offset
50
3. Use the Arrow buttons on the
remote to highlight Size &
Position, then press OK. The Size
& Position menu is displayed.
Reset Color Temperature
Size & Position
Auto Sync
Horiz. Position
64
Vertical Position
49
Horizontal Size
127
Fine Tune
8
4. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow to change the setting:
Menu for White Balance Adjustment
• Auto Adjust - Automatically
adjusts display image to
optimal size and position.
(RGB input only.)
• Computer optimizes the picture for use
as a PC monitor.
EXIT
• Normal is optimized for television viewing.
• Custom allows you to manually change each of the
color temperature settings:
Auto Sync
EXIT
• Horiz. Position - Adjusts the horizontal (left/right) position
of the display image.
Red/Green/Blue Gain - Adjusts the amount of each
color in the display.
• Vertical Position - Adjusts the vertical (up/down) position
of the display image.
Red/Green/Blue Offset - Adjusts the position of each
color in the display.
• Horizontal Size - Adjusts the width of the display image.
• Fine Tune - Adjusts the height of the display image. (RGB
input only.)
4. If you want to reset the color temperatures to the factory
default settings, highlight Reset Color Temperature and
press OK.
5. When you have finished adjusting the color temperature,
press the EXIT button on the remote.
5. When you have finished adjusting the color temperature,
press the EXIT button on the remote.
25
5
Resetting the Picture Settings
• TV Speakers - Turns the built-in speakers on or off.
To reset the picture settings to the factory default settings:
• SRS StudioSound HD - StudioSound HD™ is a feature-rich
surround sound solution which delivers an immersive
surround sound experience from the TV’s internal
speakers. Additionally, StudioSound HD completes the
entertainment experience by maintaining a steady
volume while watching programming and movies,
providing deep, rich bass, and delivering crisp details
and clear, intelligible dialog. Select Surround or Standard.
1. From the Picture Settings menu, use the Arrow buttons to
highlight More, then press OK.
2. Use the Arrow buttons on the remote to highlight Reset
Picture Mode, then press OK. The TV displays, “Are you sure
you want to RESET Picture Settings to the factory defaults?”
3. Highlight Yes and press OK.
• SRS TruVolume - TruVolume™ intelligently normalizes
volume fluctuations due to television commercials or
channel changes. Select On or Off.
4. Press the EXIT button on the remote.
Adjusting the Audio Settings
• Advanced Audio - See Adjusting the Advanced Audio
Settings on page 27.
To adjust the audio settings:
• Reset Audio Mode - Restores the audio settings to the
factory defaults. See Resetting the Audio Settings on
page 27.
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The Audio Settings
menu is displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow to change the setting:
• Balance - Adjusts the
loudness of the audio
output from the left and
right speakers.
• Lip Sync - Adjusts the synchronization between the
display image and the
accompanying audio track.
Audio Settings
Balance
0
Lip Sync
0
TV Speakers
SRS StudioSound HD
4. When you have finished adjusting the audio settings, press
the EXIT button on the remote.
On
Surround
SRS TruVolume
On
Advanced Audio
Reset Audio Mode
Adjust the Left/Right Speaker Balance
EXIT
26
5
Adjusting the Advanced Audio Settings
Resetting the Audio Settings
To adjust the advanced audio settings:
To reset the audio settings to the factory default settings:
1. From the Audio Settings Menu,
use the Arrow buttons to
highlight Advanced Audio,
then press OK. The Advanced
Audio menu is displayed.
1. Press the MENU button on the remote. The on-screen menu is
displayed.
Advanced Audio
Digital Audio Out
2. Use the Arrow buttons on the remote to highlight the Audio
icon and press OK. The Audio Settings menu is displayed.
Off
3. Use the Arrow buttons to highlight Reset Audio Mode and
press OK. The TV displays, “Are you sure you want to RESET
Audio Settings to the factory defaults?”
2. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow to change the setting:
• Digital Audio Out Changes the type of
processing for the Optical
output when connected
to a home theater audio
system. Select Off, Dolby
Digital, or PCM.
3. When you have finished
adjusting the advanced audio
settings, press the EXIT button
on the remote.
4. Highlight Yes and press OK.
5. Press the EXIT button on the remote.
Select the Digital Audio Output Mode
EXIT
27
5
Changing the TV Settings
Setting the Tuner Mode
Using the settings menu, you can:
If you are using a device that is connected to the RF input, such
as an external antenna or cable TV connection, you must set the
tuner mode.
• Change the input source
• Set up the TV tuner
• Name the TV inputs
• Set up parental controls
• Change the on-screen
menu language
• Set the time
Settings
Input Source
1. Press the MENU button on the remote. The on-screen menu is
displayed.
TV
Tuner
Name Input
2. Use the Arrow buttons on the remote to highlight the
Settings icon and press OK. The Settings menu is displayed.
Parental Controls
Menu Language
English
Time & Local Settings
3. Highlight Tuner and press OK. The Tuner Mode menu is
displayed.
CEC Settings
Power LED
On
• Adjust the CEC settings
4. Highlight Antenna or Cable and press OK.
5. Press the EXIT button on the remote.
Select input source
Changing the Input Source
Scanning for Channels
Before the TV can detect and display channels and their
associated information, you must scan for channels. A channel
scan may also be necessary when the TV has been moved to an
area where different free-to-air broadcast television channels are
available.
EXIT
To quickly access the Input Source menu, press the
INPUT button on the remote.
To change the input source from the Settings menu:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
1. From the Tuner Settings menu,
highlight Auto Channel Scan.
The auto channel scan begins.
2. Use the Arrow buttons on the remote to highlight the
Settings icon and press OK. The Settings menu is displayed.
2. Wait until the channel scan is
100% complete. Highlight Done
and press OK.
3. Highlight Input Source and press OK. The Input Source menu
is displayed.
3. Press the EXIT button on the
remote.
Channel Scan
Channel Scan
Digital Channels: 16
Analog Channels: 5
50% Complete
Cancel
4. Highlight the input source you want to display and press OK.
28
Press OK to finish
5
Adding New Channels
To add a single new analog channel:
Occasionally, you may need to add a new analog channel or
add a new range of channels. You can do this by using the Partial
Channel Search and Add Analog Channel options.
1. From the Tuner Settings menu,
highlight Add Analog Channel
and press OK. The Add Analog
Channel menu is displayed.
To add a range of new channels:
2. Highlight Enter Channel # and
use the Number Pad on the
remote to enter the number of
the channel you are adding.
1. From the Tuner menu, highlight Partial Channel Search. The
Partial Channel Search menu is displayed.
2. Highlight Scan Mode and select the type of channel you
are adding: Analog/Digital, Analog, or Digital.
Add Analog Channel
Enter Channel #
Add Channel
3. Highlight Add Channel and
press OK. The TV scans for the
channel.
3. Highlight From Channel and enter the channel from which
you want to begin the scan. (Use the Number Pad on the
remote to enter the channel.)
4. When the TV is done scanning
for the channel, press the EXIT
button on the remote.
4. Highlight To Channel and enter the channel to which you
want to end the scan. (Use the Number Pad on the remote
to enter the channel.)
Press OK to scan the channel entered
5. Highlight Start and press OK. The partial channel search
begins.
EXIT
6. Wait until the partial channel search is 100% complete.
Highlight Done and press OK.
7. Press the EXIT button on the remote.
29
5
Skipping Channels
Changing the Audio Language
After a channel scan is completed, you may find that some
channels are too weak to watch comfortably. There may also be
some channels you do not want to view. You can remove these
channels from the TV’s memory with the Skip Channel feature.
Some digital free-to-air and cable channels broadcast programs
in more than one language. The TV’s MTS (Multichannel Television
Sound) feature allows you to listen to audio in your preferred
language.
Channels that have been removed with the Skip
Channel feature can still be viewed if the channel
is entered using the Number Pad. If you wish to
completely block a channel from being viewed, use
the parental controls. See Using the Parental Controls
on page 31.
Not all programs are broadcast in multiple
languages. The MTS feature only works when the
program being viewed is being broadcast in the
language you select.
To use the Analog MTS feature:
1. From the Tuner Settings menu,
highlight Analog MTS and
press OK. The Analog MTS
menu is displayed.
To remove a channel:
1. From the Tuner Settings menu,
highlight Skip Channel.
The Skip Channel menu is
displayed.
Skip Channel
67-1
MPT-DT
67-3
MPT-KID
67-4
MPT-SQ
67-5
MPT-LNR
Mono
Stereo
2. Select Mono, Stereo, or
SAP (secondary audio
programming). Press OK.
10
2. For each channel you wish
to remove, use the Up/Down
Arrow buttons on the remote
to highlight the channel and
press OK. An X appears to the
right of each channel you
select.
Analog MTS
SAP
3. Press the EXIT button on the
remote.
To use the Digital MTS feature:
1. From the Tuner Settings menu,
highlight Digital MTS and press
OK. The Digital MTS menu is
displayed.
3. When you have selected all
of the channels you wish to
remove, press the EXIT button
on the remote.
2. Select your preferred language:
English, French, or Spanish.
Press OK.
Select channels to be skipped when
using CH+/CH-
EXIT
3. Press the EXIT button on the
remote.
30
Digital MTS
English
Select Analog MTS
modes(Mono,Stereo,SAP)
French
Spanish
EXIT
5
Using the Parental Controls
Enabling or Disabling Program Ratings
The TV’s parental controls allow you to prevent the TV from
displaying certain channels or programs without a password.
To manage program content according to its rating, you must
enable the Program Rating feature.
Accessing the Parental Controls Menu
To enable or disable the Program Rating feature:
To access the Parental Controls menu:
1. From the Parental Controls menu, highlight Rating Enable
and press OK. The Rating Enable menu is displayed.
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight the
Settings icon and press OK. The TV Settings menu is
displayed.
2. Select On or Off and press OK.
Locking and Unlocking Channels
When a channel is locked, it will be inaccessible. Locking
a channel is a good way to prevent children from viewing
inappropriate material.
3. Use the Arrow buttons on the remote to highlight Parental
Controls and press OK.
To lock or unlock a channel:
4. Enter your parental passcode. If you have not set a
passcode, enter the default, 0000. The Parental Controls
menu is displayed.
1. From the Parental Controls menu, highlight Channel Locks
and press OK. The Channel Locks menu is displayed.
2. Highlight the channel you want to lock or unlock and press
OK.
To set a custom parental passcode, see Changing
the Parental Control Passcode on page 32.
3. When a channel is locked, the Lock icon appears locked.
The channel is not accessible unless the parental passcode
is entered.
4. When a channel is unlocked, the Lock icon appears
unlocked. The channel is accessible.
31
5
Blocking and Unblocking Content by Rating
A channel may sometimes broadcast programs that are meant
for children, and at other times broadcast programs that are
meant for mature audiences. You may not want to block the
channel completely using a channel lock, but you may wish to
block certain programs from being viewed.
When this is the case, you can use the TV’s Rating Block feature
to block content based on its rating.
For a list of content ratings and their definitions, visit
www.tvguidelines.org.
5. If you want to block all unrated content, highlight Block
Unrated Shows and use the Arrow buttons on the remote to
select On.
6. When you are finished adjusting the rating level blocks, press
the EXIT button on the remote.
Changing the Parental Control Passcode
If you use the parental controls, you should change the passcode
to prevent children from accessing inappropriate material.
1. From the Parental Controls menu, highlight Change PIN and
press OK. The Change PIN menu is displayed.
2. In the New Pin field, use the Number Pad on the remote to
enter your new 4-digit parental control passcode.
To block or unblock content by its rating:
1. From the Parental Controls menu, highlight the content type
you want to adjust and press OK:
3. In the Confirm Pin field, use the Number Pad on the remote
to re-enter your new 4-digit parental control passcode.
USA - TV - USA television program broadcasts.
4. Write down your new parental control passcode and save it
in a secure location.
USA - Movie - USA movie broadcasts.
5. Press the EXIT button on the remote.
CAN - English - Canadian English television program
broadcasts.
Resetting the Content Locks
To reset the content locks to the factory-default settings:
CAN - French - Canadian French television program
broadcasts.
1. From the Parental Controls menu, highlight RESET LOCKS and
press OK. The TV displays, “Are you sure you want to RESET ALL
LOCKS SETTINGS to the factory defaults?”
2. For each rating type you want to block or unblock, use the
Up/Down and Left/Right Arrow buttons on the remote to
highlight the rating type and press OK.
2. Highlight Yes and press OK.
3. When the rating type is blocked, the Lock icon appears
locked. Content with this rating cannot be viewed.
4. When the rating type is unblocked, the Lock icon appears
unlocked. Content with this rating can be viewed.
32
5
Changing the Names of the Inputs
Changing the On-Screen Menu Language
To make it easier to recognize the different devices attached to
the inputs on your TV, you can rename the inputs. For example, if
you have a DVD player connected to the Component input, you
can rename that input to display “DVD Player”.
Your TV can display the on-screen menu in different languages.
To change the name of an input:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight the Settings
icon and press OK. The Settings
menu is displayed.
Name Input
Input Source
TV
Input Labels
TV
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
Menu Language
English
2. Use the Arrow buttons on the
remote to highlight the Settings
icon and press OK. The Settings
menu is displayed.
TV
French
Spanish
3. Use the Arrow buttons on the
remote to highlight Menu
Language and press OK.
The Menu Language menu is
displayed.
3. Use the Arrow buttons on the
remote to highlight Name
Input and press OK. The Name
Input menu is displayed.
4. Highlight Input Source and
press OK. Highlight the input
you want to rename and press
OK.
To change the on-screen menu language:
4. Highlight your preferred
language (English, French, or
Spanish) and press OK.
5. Press the EXIT button on the
remote.
Select Input source
EXIT
5. If you would like to use a preset input label, highlight Input
Labels and press OK. Highlight the input label you want to
use and press OK.
If you would like to name the input yourself, highlight the field
below Input Labels and enter your custom label using the
on-screen keyboard and press OK.
6. When you have finished naming your input, press the EXIT
button on the remote.
33
Select the Menu Language
EXIT
5
Setting the Time Zone
Adjusting the CEC Settings
To ensure the correct time is displayed when you press the INFO
button, set the TV’s time zone:
The CEC function on your TV enables you to control
HDMI-connected devices with the included remote without any
additional programming.
To have the TV display the correct time, you must be
connected to the internet via an Ethernet cable or a
wireless network.
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
To enable, disable, or adjust CEC settings:
Alaska (US)
2. Use the Arrow buttons on the remote to highlight the
Settings icon and press OK. The Settings menu is displayed.
Hawaii (US)
Pacific (US, CAN)
Mountain (US, CAN)
3. Use the Arrow buttons on the remote to highlight CEC
Settings and press OK. The CEC Settings menu is displayed.
Central (US, CAN)
3. Use the Arrow buttons on the
remote to highlight Time &
Local Settings and press OK.
The Time & Local Settings menu
is displayed.
5. Highlight your time zone and
press OK.
1. Press the MENU button on the remote. The on-screen menu is
displayed.
Time Zone
2. Use the Arrow buttons on the
remote to highlight the Settings
icon and press OK. The Settings
menu is displayed.
4. Highlight Time Zone and press
OK. The Time Zone menu is
displayed.
Not all HDMI devices support CEC. See your device’s
user manual for details.
Eastern (US, CAN)
4. Use the Arrow and OK buttons to adjust each setting:
Atlantic (CAN)
Newfoundland (CAN)
• CEC Function - To use CEC, you must select Enable.
Indiana (US)
• System Audio Control - When system audio control is on,
you can control your device’s audio using the TV’s remote
control.
Arizona (US)
• Device Discovery - Use this function to determine if your
device is connected and supports CEC.
Set your time zone
5. Press the EXIT button on the remote.
EXIT
6. Highlight Daylight Savings and press OK. The Daylight
Savings menu is displayed. Choose On if daylight savings is
in effect, or Off if it is not.
7. Highlight Postal Code. Enter your ZIP code using the keypad
on the remote, then press OK. The ZIP code information
is often used by VIA Apps to give you the most accurate
location-based information, such as weather or news.
8. Press the EXIT button on the remote.
34
5
Using the Help Menu
Displaying System Information
To display a summary of the TV settings:
You can use the TV’s Help menu to:
• Display system information
• Reset the TV settings
• Restore the TV to its factory
default settings
• Access the Setup Wizard
1. Press the MENU button on the remote. The on-screen menu is
displayed.
Help
System Info
2. Use the Arrow buttons on the remote to highlight the Help
icon and press OK. The Help menu is displayed.
Reset TV Settings
Clear Memory(Factory Default)
3. Highlight System Info and press OK.
Start Setup Wizard
4. Use the Up/Down Arrow buttons to scroll through the system
information.
5. When you are finished reviewing the system information,
press the EXIT button on the remote.
Resetting the TV Settings
To reset the TV’s picture and audio settings:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
Display System Information
EXIT
2. Use the Arrow buttons on the remote to highlight the Help
icon and press OK. The Help menu is displayed.
3. Highlight Reset TV Settings and press OK. The TV displays,
“Are you sure you would like to Restore Defaults? This will
erase any custom settings.”
4. Highlight Yes and press OK.
5. Press the EXIT button on the remote.
35
5
Restoring the TV to Factory Default Settings
Using the Setup Wizard
All of the on-screen menu settings can be reset to the factory
defaults.
The TV’s Setup App can be used to easily set up the TV tuner.
If you restore the TV to the factory default settings, all
changes you have made to the settings will be lost!
To access guided setup:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
To restore the TV to its factory default settings:
2. Use the Arrow buttons on the remote to highlight the Help
icon and press OK. The Help menu is displayed.
1. Press the MENU button on the remote. The on-screen menu is
displayed.
3. Highlight Start Setup Wizard and press OK.
2. Use the Arrow buttons on the remote to highlight the Help
icon and press OK. The Help menu is displayed.
3. Highlight Clear Memory (Factory Default) and press OK.
4. Enter your parental control passcode. If you have not yet set
up a parental passcode, enter the default, 0000.
The TV displays, “Are you sure you would like to Restore
Defaults? This will erase any custom settings.”
5. Highlight Yes and press OK. The TV displays “Memory is being
cleared. The TV will reset shortly.”
6. Wait for the TV to turn off. The TV will turn back on shortly
afterward and the Setup App will begin.
36
4. Follow the on-screen instructions. When finished, press the
EXIT button on the remote.
5
Using the Info Window
The Info Window can be displayed by pressing the INFO or GUIDE
button on the remote:
• Press the INFO or GUIDE button one time to display
channel and input information.
• Press the INFO or GUIDE button two times to display the
program title and closed captioning information.
• Press the INFO or GUIDE button three times to display the
program description.
Channel/Input Information
Program Title/CC Information
Program Description
Info Window
37
6
Using the USB Media Player
Using the USB Media Player
Viewing a USB Photo Slideshow
To play a Photo Slideshow, you must first save your images onto
a USB thumb drive.
The USB Media Player allows you to connect a USB thumb drive to
your TV and play music or photos.
Remember:
• The USB thumb drive must be formatted as FAT32
• Files on the USB thumb drive must be a supported file
type
• The USB thumb drive must have a minimum 1GB memory
• The TV will not play media from external hard drives or
mp3 players
H D M I( B E S T )
DTV/TV
RGB (PC)
A U D IO
To play your USB media:
A U D IO O U T
CABLE/ANTENNA
RGB PC
A U D IO
OU T
1. Load your photos onto a USB thumb drive using your home
computer.
1
(A R C )
US B
Y /V
Pb /Cb
C O M P O S IT E ( G O O D )
Pr /Cr
L
R
COMPONENT (BETTER)
2. Insert the USB thumb drive into the USB port on the left
side of the TV. The photos on your USB thumb drive will be
displayed automatically.
US B
USB Port
If your thumb drive is already inserted, continue with step 3.
3. Press the MENU button on the remote. The on-screen menu is
displayed.
Connecting a USB Thumb Drive to the TV
1. Turn the TV off. Connect your USB thumb drive to the USB port
on the side of the TV.
4. Use the Arrow buttons on the remote to highlight the Photo
icon and press MENU/OK. The Photo screen is displayed.
2. Press the Power/Standby button on the remote or touch the
Power control on the side of the TV to turn it on.
Media Type
File Types
Images
.jpeg
.jpg
5. Use the Arrow buttons on the remote to highlight the photo
you would like to be displayed first, then press the Play
button. The slideshow begins.
6. To pause the slideshow, press the Pause button.
7. To go to the previous photo, press the Stop button.
8. To exit the slideshow, press the EXIT button.
38
6
Folder Contents
Connected
Sources
Displays
connected
USB devices. To
change source,
highlight it and
press OK.
Back Button
Highlight this button and
press OK if you would like
to return to the previous
screen.
Back Button
Highlight and press OK to return to left column.
Current Folder
Displays the folder path.
This area displays the
contents of the currently
selected folder. You can
browse between files using
the Arrow and OK buttons
on the remote.
Current Folder
Start Fullscreen
Slideshow
Sort by Name or Date
View Thumbnails/List
View Folder Settings
Page Information
If your USB thumb drive has more
files than can be displayed on
a single screen, you can move
between pages by highlighting this
area and pressing Left/Right Arrow.
39
PHOTO VIEWER
Troubleshooting & Technical Support
A
do you have questions?
LET US HELP!
YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT
The VIZIO support team is highly trained
and is based in the United States.
We can help with:
• New Product Setup
• Connecting Your Devices
• Technical Problems
• And More
Phone: (877) 878-4946 (TOLL-FREE)
Email: [email protected]
Web: www.VIZIO.com/support
Hours of operation: Monday - Friday: 5 am to 9 pm (PST)
Saturday - Sunday: 8 am to 4 pm (PST)
We speak English • Se habla Español • Nous parlons Français
40
A
The TV displays “No Signal.”
There is no sound.
•
Press the INPUT button on the remote control to select a different
input source.
•
Press Volume Up on the remote control.
•
If you are using cable TV, satellite, or antenna connected directly
to the TV, scan for channels. See Scanning for Channels on
page 35.
•
Press the MUTE button on the remote to ensure mute is off.
•
Check the audio settings. See Adjusting the Audio Settings on
page 28 Ensure the speakers are set to On.
•
Ensure no headphones are connected to the TV.
•
Check the audio connections of external devices (Blu-ray
player, game console, cable/satellite box) that are connected
to the TV.
•
If you are using an antenna, the signal strength of the channel
may be low. Ensure your antenna is connected securely to
the TV and move the antenna around the room or close to a
window for the best signal.
There is no power.
•
Ensure the TV is plugged into a working electrical outlet.
•
Ensure the power cable is securely attached to the TV.
The power is on, but there is no image on the screen.
•
Ensure all cables are securely attached to the TV.
•
Ensure all devices are connected correctly. Devices differ; see
your device’s user manual for details.
•
Adjust Brightness, Contrast, or Backlight. See Adjusting the
Picture Settings on page 25.
•
Press the INPUT button on the remote to select a different input
source.
The colors on the TV don’t look right.
•
Adjust the Color and Tint settings in the Picture menu. See
Adjusting the Picture Settings on page 25.
•
Reset the picture settings. See Resetting the Picture Settings on
page 28.
•
Check all cables to ensure they are securely attached.
The buttons on the remote aren’t working.
•
Ensure you are only pressing one button at a time.
•
Point the remote directly at the TV when pressing a button.
•
Replace the remote batteries with new ones. See Replacing the
Batteries on page 15.
The image quality is not good.
41
•
For the best image quality, view high-definition programs using
digital sources. Connect your devices with HDMI cables.
•
If you are using an antenna, the signal strength of the channel
may be low. Ensure your antenna is connected securely to
the TV and move the antenna around the room or close to a
window for the best signal.
A
The picture is distorted.
•
Nearby electrical devices may be interfering with the TV.
Separate the TV from electrical appliances, cars, or fluorescent
lights.
•
Ensure all cables are securely attached.
When I change input source, the display image changes size.
The display image does not cover the entire screen.
•
If you are in RGB mode (computer), ensure that H-Size and
V-Position in the on-screen menu are set correctly.
•
If you are using TV, AV1, AV2, or Component with 480i input, press
the WIDE button on the remote to change the screen mode.
The TV has pixels (dots) that are always dark or always lit.
•
Your HDTV is precision-manufactured using an extremely high
level of technology. However, sometimes pixels may not display
correctly. These types of occurrences are inherent to this type of
product and do not constitute a defective product.
I see “noise” or static on the screen.
•
When your TV’s digital capabilities exceed a digital broadcast
signal, the signal is up-converted (improved) to match your TV’s
display capabilities. This up-converting can sometimes cause
irregularities in the image.
•
If you are using an antenna, the signal strength of the channel
may be low. Ensure your antenna is connected securely to
the TV and move the antenna around the room or close to a
window for the best signal.
When I change input source, the volume changes.
•
The TV remembers the volume level on each input source. If the
volume level on the new input source is higher or lower than
the level on the source you switch from, the difference may be
noticeable.
•
Use the Volume Up/Down buttons on the remote to adjust the
volume.
42
•
The TV remembers the viewing mode on each input source. If
the viewing mode on the new input source differs from the one
on the input source you switch from, the difference may be
noticeable.
•
See Changing the Screen Aspect Ratio on page 21.
B
Specifications
E191VA
Screen Size:
19” Class
Viewable Area:
18.5”
Dimensions w/ Stand:
w/o Stand:
18.01 x 12.54 x 4.28”
18.01 x 12.54 x 1.54”
Weight w/ Stand:
w/o Stand:
8.09 lbs
7.32 lbs
TV Type:
E-LED
Refresh Rate:
60Hz
Maximum Resolution:
1366 x 768
Colors:
16.7 Million
Response Time:
<5 ms
Brightness:
250 nits
Viewing Angle:
170° H, 160° V
HDMI Inputs:
1
Component Video
Inputs:
1
Composite Inputs:
1 (Shared with Component)
RF Antenna Input:
1
USB 2.0 Ports:
1
USB Photo Slideshow:
Yes
USB Individual Photo:
Yes
43
B
E191VA
USB Video Playback:
No
USB Music Player:
No
1
RGB Inputs:
OSD Language:
English, Spanish, French
Remote Control Model:
XRT010
Certifications:
UL, CUL, FCC class B, Canada (BETS-7), HDMI 1.4 incl CEC/ARC, Dolby Digital
Compliance:
Energy Star 5.3, ATSC Spec A/65. EIA/CEA-766-A, California Energy Commission Auto Shut Down
Power Consumption:
20.6W
Standby Power:
<1W
VIZIO, Inc. has made every effort to ensure the accuracy of the information provided herein. All product specifications, functionality, features, configurations, performance, design and
other product information described herein are subject to change without notice. VIZIO, Inc. disclaims liability for typographical, technical, or descriptive errors.
44
C
Limited Warranty
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only.
VIZIO provides a warranty to the original purchaser of a new Product
against defects in materials and workmanship for a period of one (1)
year of non-commercial usage and ninety (90) days of commercial
use. If a Product covered by this warranty is determined to be defective
within the warranty period, VIZIO will either repair or replace the Product
at its sole option and discretion.
other than by a VIZIO authorized service center. Products with unreadable
or removed serial numbers, or requiring routine maintenance are not
covered. This one year limited warranty does not cover Products sold
“AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR
DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET
FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND
DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S
NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH
DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE
PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR
LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST
REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL
DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
To obtain warranty service, contact VIZIO Technical Support via e-mail:
[email protected] or via phone at 877 MY VIZIO (877.698.4946)
from 6:00AM to 9:00PM Monday through Friday and 8:00AM to 4:00PM
Saturday and Sunday, Pacific Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO
SERVICE CENTER. Proof of purchase in the form of a purchase receipt or
copy thereof is required to show that a Product is within the warranty
period.
Parts and Labor
There will be no charge for parts or labor during the warranty period.
Replacement parts and Products may be new or recertified at VIZIO’s
option and sole discretion. Replacement parts and Products are
warranted for the remaining portion of the original warranty or for ninety
(90) days from warranty service or replacement, whichever is greater.
CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.
Personal Data
If your VIZIO product is capable of storing personal data and other
information, ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE
COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this
occurs, your product will be restored to you configured as originally
purchased. You will be responsible for restoring all applicable data and
passwords. Recovery and reinstallation of user data is not covered under
this Limited Warranty. In order to protect your personal information, VIZIO
recommends that you always clear all personal information from the
unit before it is serviced, regardless of the servicer.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain
warranty service. VIZIO is not responsible for transportation costs to the
service center, but VIZIO will cover return shipping to the customer. PREAUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO
SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original
carton box and shipping material or packaging that affords an equal
degree of protection. VIZIO Technical Support will provide instructions for
packing and shipping the covered Product to the VIZIO service center.
Zero Bright Pixel Defect Guarantee
This policy covers “zero bright pixel” defects for the duration of the limited
“ONE YEAR WARRANTY” on select new product purchases. To determine
if this guarantee applies to your product, refer to the “DETAILS” tab of
the model’s product information page (www.VIZIO.com) or look for the
“zero bright pixel” guarantee on the box.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and
workmanship. This warranty does not cover, for example: cosmetic
damage, normal wear and tear, improper operation, improper voltage
supply or power surges, signal issues, damages from shipping, acts of
God, any type of customer misuse, modifications or adjustments, as well
as installation and set-up issues or any repairs attempted by anyone
45
D
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Notice
1. The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used
in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modification to this
equipment. It is the responsibilities of the user to correct such
interference.
FCC warning
Changes or modifications not expressly approved by the party responsible
for compliance with the FCC Rules could void the user’s authority to operate
this equipment.
46
MODELS
// E3D320VX
// E3D420VX
// E3D470VX
© 2012 VIZIO INC. All rights reserved.
121018CH-B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement