Morgan MTF-12T1 User Manual

Add to My manuals
4 Pages

advertisement

Morgan MTF-12T1 User Manual - Download PDF | Manualzz
MTF-12T1(IM)260717.qxp_Layout 1 8/1/17 2:21 PM Page 1
USER MANUAL
Market Expansion
Services by
www.dksh.com.my
E-mail: [email protected]
www.morgan.my
facebook.com/morganappliances
Table
Fan
MTF-12T1
MTF-16T1
MTF-12T1(IM)260717.qxp_Layout 1 8/1/17 2:21 PM Page 2
C O N T E N T S
3
3
4
5
5
6
Parts Idenfication
Specifications
Safety Precautions
PARTS IDENTIFICATION
1. Front Grille
2. Spinner
3. Blade
4. Plastic Nut
6
5. Rear Grille
5
6. Housing
7. Control Switch
8. Base
Assembly Instructions
3
4
1
7
Operation Instructions
Trouble Shooting
2
8
SPECIFICATIONS
MODEL
RATED VOLTAGE / FREQUENCY
RATED WATTAGE
SIZE
MFC-12T1
MTF-16T1
45W
55W
220-240V~ 50Hz
300MM
3
400MM
MTF-12T1(IM)260717.qxp_Layout 1 8/1/17 2:21 PM Page 3
SAFETY PRECAUTIONS
Congratulations on your purchase of another quality Morgan product. We seek to
excel by designing products with innovation, quality and safety of our customers in
mind.
•
•
•
•
•
•
•
•
Do not use outdoors. Your appliance is intended solely for household use only.
Do not operate the appliance if power cord or power plug has been damaged, It must
1.
2.
Never leave the appliance within reach of children without supervision. The use of this
2.
appliance by young children or the physically challenged must always be supervised.
Unplug the fan before cleaning, transportation and after you have finished operating
the fan.
Never immerse the appliance, the power cable or the power plug in water or in any
other liquids. Never spray liquids onto fan.
Deformation or operational failure may take place when the appliance is used on
unstable surfaces or close to places with heating sources.
3.
4.
5.
6.
7.
Avoid contact with moving parts.
Do not operate in the presence of explosives or flammable fumes.
Always ensure fan is properly fitted before use.
•
Always use on a dry, flat surface.
The use of attachments not recommended by the manufacturer may be hazardous.
If appliance malfunctions or has been damaged in any manner, do not attempt to
Insert the fan pedestal into the base and press the pedestal firmly into position.
On the underside of the base, tighten pedestal and base firmly together.
ASSEMBLY OF BLADES AND GRILLES
1.
order to avoid any hazards.
•
•
ASSEMBLY OF FAN PEDESTAL ONTO BASE
be replaced by the manufacturer or its service agent or a similarly qualified person in
NOTE
•
ASSEMBLY INSTRUCTIONS
1.
2.
3.
4.
Unscrew the spinner clockwise and the nut counter-clockwise then remove the
plastic sleeve around the motor shaft.
Place the rear grille in proper position with the handle facing upwards.
Screw on the plastic nut tightly to the attached fan grille.
Discard sleeve on shaft.
Slide the blade onto the shaft until it contacts the retaining pin.
Screw the spinner onto the motor shaft in a counter-clockwise direction.
Loosen the screw on the plastic ring with a screw driver. Mount the front grille (logo
place in the proper direction) with the rear grille and fasten the plastic ring.
OPERATING INSTRUCTIONS
Fan speed is controlled by pressing the control switch.
To oscillate, push down the knob on the motor housing.
To stop oscillation, pull up the knob.
To adjust vertical angle, tilt fan head upwards or downwards as desired.
repair this appliance yourself but return it to the agent for examination, repair or
adjustment.
4
5
MTF-12T1(IM)260717.qxp_Layout 1 8/1/17 2:21 PM Page 4
PROBLEM
No oscillation
Not functioning
Noisy
TROUBLE SHOOTING
SOLUTION
Check if oscillation knob is depressed
Check power plug, ensure that power is switched on and
Speed selector is turned to either one of the three speeds.
Ensure that the fan blade is properly inserted into shaft pins.
Ensure that plastic nut for rear grille is tightened.
Ensure fan blade knob is securely tightened.
Ensure fan grille ring is securely tightened.
6
7

advertisement

Key Features

  • Adjustable vertical angle
  • Oscillation feature
  • Three speed settings
  • Easy assembly
  • Quiet operation
  • Durable construction
  • Safety features
  • Home use

Related manuals

Frequently Answers and Questions

How do I adjust the fan speed?
Use the control switch on the fan base to select from three speeds.
How do I make the fan oscillate?
Push down the knob on the motor housing to activate oscillation.
How do I adjust the fan's vertical angle?
Tilt the fan head upwards or downwards as desired.
What should I do if the fan is making noise?
Ensure the fan blade is properly inserted and the plastic nut for the rear grille is tightened. Also check that the fan blade knob and grille ring are securely fastened.
Download PDF

advertisement