We trust that you and your baby will have many peaceful
The Bednest is a multifunction crib/bassinet which can be used free-standing or attached securely to your bed to provide a safe sleeping environment for your baby. Being quick and simple to set-up the Bednest also makes an ideal travel crib giving your baby the reassurance of sleeping in the same familiar environment. We trust that you and your baby will have many peaceful night’s sleep, thanks to Bednest. Please read this user guide carefully and retain for future reference. To Ensure the Safety of Your Baby: 2 1 The Bednest is recommended for your baby only until he or she is able to sit-up unaided. When your baby is able to kneel or pull him or her-self up, the Bednest should no longer be used. 2 When the Bednest is used away from your bed, whether on its stand or any other surface, the sides should be up and secured. 3 When your baby is left unsupervised in the Bednest, always ensure that both sides of the Bednest are up and secured. 4 When using the Bednest crib away from its stand, always place it on a firm flat and level surface. 5 When using for bedside sleeping, always attach the Bednest to your bed as described in this user guide. 6 Do not place another mattress or similar items on top of, or beneath, the supplied mattress. 7 Use of cot bumpers and other padded items, including soft toys, are not recommended within the Bednest as these can be a smothering hazard. 8 If you need to replace the mattress always use a genuine Bednest branded mattress. Replacement mattresses are available from www.bednest.com. 9 Never carry the Bednest crib with your baby inside. 10 When placing your baby in the Bednest, ensure your baby’s feet are near one end of the Bednest as recommended by health professionals. This is called the ‘feet to foot’ position. 11 If you have been advised to tilt the Bednest by your health professional, do not exceed 5cm height difference between the higher (head) height and the lower (feet) height. Tilt should be achieved by varying the extension of the stand, using the adjustable sliding catches. Never place a cushion or other bolster under the mattress to achieve the tilt you require. 12 Other young children should not be allowed to play unsupervised in the vicinity of the Bednest. 13 Do not position the Bednest in the near vicinity of an open fire or other strong sources of heat, such as electric bar fires, gas fires, etc. 14 Please read the notices on page 15 15 Please keep these instruction for future reference. 16 Do not use the the Bednest if any parts are missing or broken, contact Bednest for advice. Only use spare parts purchased from Bednest. How to use the Bednest The Bednest’s unique design allows it to be used in various ways. • For bedside sleeper when attached to the side of your bed • As a free standing crib or bassinet NB: for safety reasons never lift the Bednest crib with your baby still inside • As a Moses basket / bassinet around your home • As a travel crib Setting-up the Bednest from the Box The Bednest is simple to use. When you open the box you will find: • One complete Bednest crib, including mattress • One stand • One long strap and one short strap for securing the stand to your bed setting-up 3 step 1 4 Carefully remove the Bednest stand from the packing and place it on the floor. Release the white catches and as you lift the stand the legs will drop down. Once the stand is at the correct height, push the white leavers down to lock the stand in position. Note: The stand will not lock below the minimum height position Place the Bednest crib on a flat surface. Lift the wooden ends until vertical (you will hear them click when securely in place). step 2 5 3 step 6 Lift the side panels until vertical and drop them down into their retaining slots (they should now remain free-standing). Clip each of the four corner tabs to the securing ‘eyes’ on the wooden ends. step 4 7 5 step Remove plastic cylinders from the pins on the underside of the crib base and place the crib on the stand. The pins in the base of the crib will locate in the holes on the stand. Check that the crib does not move on the stand 8 step 6 Remove the plastic cover from the mattress. Cover the mattress with a fitted sheet. Fitted sheets may be ordered direct from Bednest to fit the mattress provided. To use the Bednest as bedside sleeper when attached to the side of your bed How to attach the stand to a frame bed. Set the height of the stand to between 3 and 5 cm (1 to 2 inches) below the top of your mattress. Thread the short strap around a side rail of your bed frame and then around the center handle of the stand (see illustration) Thread the loose end of the strap through the metal buckle and pull tight IMPORTANT the stand should be firmly secured against the frame, check this by pushing the stand away from the bed with a reasonable force. The stand should NOT move away from the side rail by more than 1cm or ½ inch and all feet should be touching the floor. If the stand moves check the buckle and readjust until the stand cannot move. Periodically check the stand is still securely fastened to the bed frame 9 To use the Bednest as bedside sleeper when attached to the side of your bed How to attach the stand to a platform bed frame. Set the height of the stand level with the top of the bed frame rail. Thread the short strap around a side rail of your bed frame and then around the center handle of the stand (see illustration). Thread the loose end of the strap through the metal buckle and pull tight. 10 IMPORTANT the stand should be firmly secured against the frame, check this by pushing the stand away from the bed with a reasonable force. The stand should NOT move away from the side rail by more than 1cm or ½ inch and all feet should be touching the floor. If the stand moves check the buckle and readjust until the stand cannot move. Periodically check the stand is still securely fastened to the bed frame. 11 How to attach the stand to a divan or solid based bed. Thread the long strap around the divan base (not the mattress) and through the metal buckle. Pull the straps tight against the divan base- the strap should be drum taut against the divan base. Using the short strap, thread this under the long strap and around the centre handle of the crib stand Thread the loose end of the strap through the metal buckle and pull tight. IMPORTANT the stand should be firmly secured against the bed with all 4 feet touching the floor, check this by pushing the stand away from the bed with a reasonable force. The stand should NOT move away from the bed by more than 1cm or ½ inch. If it does, check the buckles and readjust until the stand cannot move. Periodically check the stand is still securely fastened to the bed. The crib should be placed on the stand with the side panel that folds in half next to your bed. (see illustration) Unclip the side panel closest to your bed, lift, fold in half and drop on to your mattress. The side panel should form a continuous surface with you bed with no gaps between the end of the side frame and your mattress. You can fully open the side panel when it rests on your mattress, if needed. To safely use the Bednest as a bedside sleeper ensure your own bed is within the recommended height range of 30 to 66cms (12 to 26 ins) and the side panel when in the open position overlaps your mattress. 12 Alternatively you can fold the folding side panel to halfway – you may choose this option when your baby starts to roll at about three months of age. TO ENSURE THE SAFETY OF YOUR BABY - both side panels must be completely raised and secured to the wooden ends when you are not in bed beside your baby. 1 2 13 How to use as a travel crib or to fold flat for storage. Step 1 Unclip the side panels, lift them up a couple of centimeters, then fold them inwards to lie flat on the mattress. Step 2 Fold down the wooden ends by placing your hand under the end of the mattress and pressing the plastic lever towards the centre to disengage the catch. Do this for both ends. Lift the folded Bednest crib off the stand. Step 3 Now fold the stand: hold the middle carry-handle to avoid squashing fingers, lift both sliding catches and gently guide the stand down until folded flat. Lock the sliding catches again to hold the stand in its fully folded position. (not shown). An optional travel bag is available from www.bednest.com To use the Bednest as a Moses Basket / bassinet. Simply lift the top crib section off the stand to use around the house. Place on a firm, stable, level surface and never move it whilst your baby is in it. To ensure the safety of your baby both side panels must be completely raised and secured. Fabric Sides The fabric side panels can be easily removed for washing by undoing the hook and loop strips at the bottom and sliding off from the top. Please follow the guidance on the care label. Finally, we would appreciate your feedback about your experience of using your Bednest, so please do pass on your comments via www.bednest.com. 14 Suitable beds to use with the Bednest bedside sleeper. Open frame bed Frame extended Mattress and box springs align WARNING A bedside sleeper is designed to provide a sleeping area for an infant until he she begins to push up on hands and knees, weighs 10kgs (22lbs) or is approximately 5 months of age. Move your child to another sleeping product when your child reaches this stage. The bedside sleeper cannot be used with beds whose frames protrude from the mattress by more than 3 ins. DO NOT use the bedside sleeper if any parts are missing, damaged or broken. Contact Bednest for replacement parts and instructional literature if needed. DO NOT substitute parts. Keep instructions for future use Always read and follow assembly instructions for each product mode- bedside sleeper and bassinet. ENTRAPMENT HAZARD – To prevent death from entrapment, bedside sleeper must be properly secured to adult bed using the attachment system. • There must be no more than 13mm (1/2 in) gap between the bedside sleeper and adult bed • Check the tightness before each use by pulling bedside sleeper in a direction away from the adult bed • If gap exceeds 13mm (1/2 in) DO NOT use product. Do not fill gap with pillows, blankets or other items that are suffocation hazards. To avoid death from the infants neck being caught between the stand and the top of adult mattress the top of the stand must be no higher than the adult bed mattress. This bedside sleeper is designed for use only with adult beds that are between 30cm and 66cm (12in and 26in) from the floor to the top of the adult mattress. SUFFOCATION HAZARD - Infants have suffocated in gaps between extra padding and sides of the bassinet/cradle and on soft bedding. Use only the pad provided by the manufacturer. NEVER add a pillow or comforter or another mattress. Strings can cause strangulation! DO NOT place items with a string around a child’s neck, such as hood strings or pacifier cords. DO NOT suspend strings over a bassinet or cradle or attach strings to toys. 15 cted This product conforms to BS EN 1130: 1996 Cribs and cradles for domestic use - parts 1 and 2 ASTM F2906-13 Bedside sleepers ASTM F2194-13a Bassinets and cradles www.bednest.com Bednest Ltd, Unit 7 Culters Farm Business Centre Wooton Wawen, Henley in Arden, Warwickshire, B95 6DJ, United Kingdom. [email protected] +44 (0) 1264 854337 Company Reg No 5322058.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project