Minitor Premo-V35 Quick Start Manual

The Minitor Premo-V35 is a foot-operated switch designed to control a handpiece (motor). It's primarily used for starting and stopping the handpiece, which is particularly useful for tasks requiring precise control. The switch features an overload alarm for safety, ensuring it disconnects power if it detects an overload condition.

PDF Download

Document

INSTRUCTION MANUAL
ＦＳ２０２－Ｖ３５
ＦＯＯＴ
ＳＷＩＴＣＨ
Read following instructions before attempting to use. Keep this manual
always in the vicinity of use for your reference. Before using the unit,
check if there is any damage on this product due to transport condition.
If any damage was found, contact our Minimo dealer.
SAFETY PRECAUTIONS
WARNING
(Indicates that incorrect operation presents significant
danger of accident resulting in death or serious injury to user.)
○ Wear an appropriate eye protection and a respiratory protective
equipment when using the handpiece.
○ Do not attempt to disassemble and remodel this product. May cause of
malfunction, fire and / or electric shock.
○ Hold motor (handpiece) tightly when turn the unit on.
CAUTION
(Indicates that incorrect operation presents possibility
of injury to user or damage to unit.)
○ Do not use this product in humid place and in place with much corrosive
gas and chemicals. May cause of fire and / or electric shock.
○ Do not use this product in condensation condition. May cause of
electric shock.
○ Use this product within temperature from 0℃ to 40℃.
○ Keep this product away from children.
○ Prevent dust, oil, water, etc. from entering inside. If entering, ask our
Minimo dealer for repairing.
○ Do not put heavy material on cord. The cord may be damaged and cause of
fire and electric shock.
○ Keep cord away from thermal appliance. The cord may be melted and cause
of fire and electric shock.
-1-
1 .FUNCTION
The foot switch remains On while pressing and turns Off while releasing.
2.OPERATION
Please refer to the Operation Manual of Premo-V35 for each name of part and
function of Controller.
①Connect Foot Switch to Foot Switch Socket on the bottom side of Controller.
* Do not connect Foot Switch to Controller while Controller is “On”.
②Hold handpiece tightly, step on Foot Switch and then handpiece will start running.
③Release foot from Foot Switch to stop running handpiece.
●HOW TO RESET THE OVERLOAD ALERM
In case safety function was activated and stops flowing electric current with
displaying “OL”, turn Foot Switch off and then overloading will be canceled.
Products are subject to change without notice.
2020.03.01 IME-FS-V35
-2-
">

Hello! I am an AI chatbot specifically trained to assist you with the Minitor Premo-V35 Quick Start Manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key features

Foot Operated Switch
Handpiece Control
On/Off Function
Overload Protection
Safety Feature

Frequently asked questions

Connect the Foot Switch to the Foot Switch Socket on the bottom side of the Controller. Ensure the controller is 'Off' before connecting.

Hold the handpiece tightly, step on the Foot Switch to start. To stop, release the foot from the Foot Switch.

When the overload alarm activates, the device will display 'OL' and stop the flow of electric current. To reset, turn off the Foot Switch and the overload will be canceled.