Disassembling Samsung Gravity SGH

Disassembling Samsung Gravity SGH
Disassembling Samsung Gravity SGH-T459 Rear Case
Disassembling Samsung Gravity SGH-T459
Rear Case
This guide will help disassemble the rear case from the rest of the cell phone.
Written By: William Glatz
INTRODUCTION
This guide will teach you how disassemble and reassemble the rear case to your Samsung
Gravity SGH-T459.
TOOLS:
Phillips #1 Screwdriver (1)
Plastic Opening Tools (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
Disassembling Samsung Gravity SGH-T459 Rear Case
Step 1 — Back Cover

Press and hold the End key to
power down the cell phone.

Gently remove the back cover with
your fingers by sliding it in the
direction of the arrows.
Step 2 — Battery

Gently lift up and remove battery
with your fingers in the direction of
the arrows.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
Disassembling Samsung Gravity SGH-T459 Rear Case
Step 3 — Rear Case

Hold the cell phone steady with one hand. With the other hand, use a Phillips screwdriver
to remove all 6 screws around the edges of the rear case.

Slide the phone open.

Use a plastic prying tool to pry open the edge of the green trim near the space bar of the
keypad. You should hear the rear case unsnap.

Gently lift and remove the rear case from the cell phone.
To reassemble your device, follow these instructions in reverse order.
This document was last generated on 2015-05-09 12:19:22 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement