TV Logic LUM-550M Operation Manual

Multi Format
4K LCD Monitor
SDI
MODE
HDMI
MENU
UP
DOWN
ENTER
POWER
USB
Operation Manual_v1.9
LUM-550M
LUM-430M
SDI IN
CH 1
SDI IN
CH 2
SDI IN
CH 3
SDI IN
CH 4
12G-SDI OUT
HDMI IN
AUDIO OUT
RS-232
RS-422 IN RS-422 OUT REMOTE
LAN
Contents
1. Caution ..............................................................................
2. Main Features .......................................................................
3. Controls & Functions ................................................................
4. Menu Tree & Adjustment .............................................................
5. Menu Operations .....................................................................
[1] PICTURE .........................................................................
[2] VIDEO ............................................................................
[3] MARKER ..........................................................................
[4] GPI ................................................................................
[5] NETWORK .......................................................................
[6] AUDIO ............................................................................
[7] SYSTEM ..........................................................................
6. Firmware Upgrade ..................................................................
7. Video Support Resolution ...........................................................
8. Product Specifications ..............................................................
04
06
07
11
13
13
14
15
16
17
17
18
19
20
22
4K LCD Monitior 3
1. Caution
●●
●●
Always use set voltage.
AC 100 ~ 240V
• All operating instructions must be read and
understood before the product is operated.
• These safety and operating instructions must
be kept in safe place for future reference.
• All warnings on the product and in the
instructions must be observed closely.
• All operating instructions must be followed.
• Do not use attachments not recommended
by the manufacturer. Use of inadequate attachments can result in accidents.
• This product must be operated on a power
source specified on the specification label.
If you are not sure of the type of power supply
used in your home, consult your dealer or local
power company. For units designed to operate
on batteries or another power source, refer to
the operating instructions.
• The power cords must be routed properly
to prevent people from stepping on them or
objects from resting on them. Check the cords
at the plugs and product.
• Do not overload AC outlets or extension cords.
Overloading can cause fire or electric shock.
• Never insert an object into the product
through vents or openings. High voltage flows
in the product, and inserting an object can cause electric shock and/or short internal parts.
For the same reason, do not spill water or liquid
on the product.
• Do not attempt to service the product
yourself. Removing covers can expose you to
high voltage and other dangerous conditions.
Request a qualified service person to perform
servicing.
4 4K LCD Monitor
• If any of the following conditions occurs, unplug
the power cord from the DC outlet, and request
a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid was spilled on the product or
when objects have fallen into the product.
c. When the product has been exposed to rain
or water.
d. When the product does not operate properly as described in the operating instructions. Do not touch the controls other
than those described in the operating
instructions. Improper adjustment of controls not described in the instructions
can cause damage, which often requires extensive adjustment work by a qualified
technician.
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the
product indicates that the product needs
servicing.
• In case the product needs replacement parts,
make sure that the service person uses
replacement parts specified by the manufacturer,
or those with the same characteristics and
performance as the original parts. Use of
unauthorized parts can result in fire, electric
shock and/or other danger.
• Upon completion of service or repair work,
request the service technician to perform safety
checks to ensure that the product is in proper
operating condition.
• The power cord plug shall be connected to a
MAINS socket outlet with a protective earthing
connection.
• Unplug the power cord from the AC outlet when happening any problem in the product.
1. Caution
• When mounting the product be sure to install the product according to the method
recommended by the manufacturer.
• Sudden stops, excessive force and uneven
floor surface can cause the product to fall from
the cart.
• Unplug the power cord from the DC outlet before cleaning the product. Use a damp cloth
to clean the product. Do not use liquid cleaners
or aerosol cleaners.
• The vents and other openings in the
cabinet are designed for ventilation. Do not
cover or block these vents and openings since
insufficient ventilation can cause overheating
and/or shorten the life of the product. Do not
place the product on a bed, sofa, rug or other
similar surface, since they can block ventilation
openings. This product is not designed for
built-in installation; do not place the product
in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.
• Unplug the power cord from the AC outlet if
you do not use the product for considerably
long time.
• Do not use the product near water, such as
bathtub, washbasin, kitchen sink and laundry
tub, swimming pool and in a wet basement.
• Keep the product away from direct rays of the
Sun-light.
• Do not place the product on an unstable cart,
stand, tripod or table. Placing the product on an
unstable base can cause the product to fall,
resulting in serious personal injuries as well as
damage to the product. Use only a cart, stand,
tripod, bracket or table recommended by the
manufacturer or sold with the product. When
mounting the product on a wall, be sure to
follow the manufacturer’s instruction. Use only
the mounting hardware recommended by the
manufacturer.
• When relocating the product placed on a cart, it
must be moved with the utmost care.
• In case of installation the product on the rack, the inside of the product would be overheated
due to heat from other devices near by and the decrease of air circulation, which could damage to the monitor. To prevent the damage, please have enough space for the
monitors and use fan to avoid heat and maintain
the operating temperature. (Refer to the specication of the product).
• The LCD panel used in this product is made of
glass. Therefore, it can break when the product
is dropped or applied with impact. Be careful
not to be injured by broken glass pieces in case
the LCD panel breaks.
• Keep the product away from heat sources such as radiators, heaters, stoves and other heat
generating products (including amplifiers).
4K LCD Monitor 5
2. Main Features
LUM-550M/430M Monitor contains the following features :
●●
●●
●●
●●
●●
●●
●●
●●
●●
Compatible with various SDI signal formats
- This product is compatible with various
SDI signals - 480i, 576i, 1080i, 1080p, 1080psf, 2160p.
All-in-one type system
- Slim and all-in-one type monitor that requires no additional accessories, for optimized space utilization.
- This product is suitable for installation in
the Studio Wall.
Wide Screen support
- This product supports native 16:9 aspect
ratio.
Remote control function
- This product can simply be Remotecontrolled by cable connection without
additional peripheral equipment attached
to unit.
- This product supports TVLogic’s Remote
Control program.
Dual Link Support
- Supports Dual Link YCbCr/RGB 4:4:4, YCbCr 422 format
Ethernet & USB support
- Supports Ethernet and USB connection for
easy update of new function and error correction.
HDMI input support
- Supports HDMI inputs without additional
equipment.
3G Support
- Supports 3G A/B format
12G-SDI Support
- Supports 12G-SDI format
6 4K LCD Monitor
●●
●●
●●
Auto Color Calibration support
- Supports Auto Color Calibration by directly
connecting the color probes to the product.
Optical Support (optional)
- Support SDI signal input by connecting optical cable without additional equipment.
Additional features
- Wide Viewing Angle, Loop Through (SDI),
OSD user interface.
3. Controls & Functions
LUM-550M : FRONT
SDI
MODE
HDMI
MENU
UP
DOWN
ENTER
POWER
USB
LUM-550M : REAR
LUM-550M_REAR PLATE_V2.1 (2016/07/27)
SDI IN
CH 1
SDI IN
CH 2
SDI IN
CH 3
SDI IN
CH 4
12G-SDI OUT
HDMI IN
AUDIO OUT
RS-232
RS-422 IN RS-422 OUT REMOTE
LAN
4K LCD Monitor 7
3. Controls & Functions
LUM-430M : FRONT
SDI
SDI
MODE
MODE
HDMI
HDMI
MENU
MENU
UP
UP
DOWN
DOWN
ENTER
ENTER
POWER
POWER
USB
USB
LUM-430M : REAR
SDIININ
SDI
CH11
CH
8 4K LCD Monitor
SDIININ
SDI
CH22
CH
SDIININ
SDI
CH33
CH
SDIININ
SDI
CH44
CH
12G-SDIOUT
OUT
12G-SDI
HDMIININ
HDMI
AUDIOOUT
OUT
AUDIO
RS-232
RS-232
RS-422ININ RS-422
RS-422OUT
OUT REMOTE
REMOTE
RS-422
LAN
LAN
3. Controls & Functions
FRONT
●●
●●
●●
[SDI] Button/Lamp
- Used to select SDI A/B input signal.
[MODE] Button/Lamp
- Used to select the UD MODE.
- Press the button to move through the modes : 2-SAMPLE -> 4 QUAD -> SINGLE
[HDMI] Button/Lamp
- Used to select HDMI input.
●●
●●
●●
●●
●●
[MENU] Button
- Used to activate the OSD menu.
[UP] Button
- Used to move up through the menus during the OSD menu activation.
- Also used to increase the value of the selected feature.
[DOWN] Button
- Used to down through the menus during
the OSD menu activation.
- Also used to decrease the value of the selected feature.
[ENTER] Button
- Used to confirm a chosen value.
[POWER] Button/Lamp
- Used to turn the power on and off.
4K LCD Monitor 9
3. Controls & Functions
REAR
●●
●●
●●
●●
●●
●●
●●
●●
[SDI INPUT x 4] (BNC)
- Signal input terminal for HD/SD SDI signal.
- The first and second SDI INPUT terminal
supports up to 12G input.
[12G-SDI Output] (BNC)
- 12G/3G signal output terminal for HD/SD
SDI signal.
[HDMI] (HDMI)
- Signal input terminal for HDMI signal.
[AUDIO OUTPUT] (PHONE JACK)
- Audio disembedded signal output.
[RS-232 PORT] (RJ-45)
- Used to update new program to add new
functions and correct errors.
[RS-422 PORT] (RJ-45)
- Used to control the monitor with a protocol
provided by TVLogic.
[REMOTE] (RJ-45)
- Provides connection to control equipment
for external monitor control.
- Features can be changed in the GPI section
of the OSD menu.
[LAN]
- Used to control the monitor with a protocol
provided by TVLogic.
10 4K LCD Monitor
●●
~ AC IN
- 100 ~ 240V AC 50/60Hz
<Warning!!>
When using the product make sure
to ground, whenever possible, before
connecting the input signal cable in order
to prevent any possible damage to the
product or connected devices. The damage
may include signal noise, malfunction
of main board or display panel. And the
connected devices such as camera or
video source player may also be influenced
through signal cable. Please check if the AC
power source and the power extender or
power distributor is grounded.
4. Menu Tree & Adjustment
[1] Menu Organization
●●
[3] Menu Control Sequence
The product may be controlled and set
system-wise through OSD displayed on
the screen.
- Below is the layout of the product’s menu.
PICTURE
COLOR
MARKER
GPI
NETWORK
AUDIO
SYSTEM
<MAIN MENU>
BRIGHT
CONTRAST
BACK LIGHT
TIMECODE
4K MODE
<SUB MENU>
O
O
30
OFF
2 SAMPL INTL
<VALUE MENU>
Menu Control sequence follows the order
below:
1. Press the MENU button to activate the
OSD menu.
2. Move to a desired menu with the UP/
DOWN button.
3. Press the ENTER button to select a menu
and move to a sub-menu with the UP/
DOWN button.
4. Press the ENTER button to select the desired sub-menu. (The selected sub-
menu’s font color will be changed to blue.)
5. Press ENTER button to save the new value
after adjusting the value with UP/DOWN
button. (The changed font color will be
returned to default(white).)
6. Press the MENU button to return to the
previous menu and if there is no previous
menu, the OSD menu will be removed
from the screen.
[2] Menu Control
●●
You may control various functions using MENU, UP, DOWN, ENTER buttons on the
bottom front of the monitor and GPI CONTROLLER PC REMOTE CONTROL S/W.
4K LCD Monitor 11
4. Menu Tree & Adjustment
[4] MENU TREE
BRIGHT
CONTRAST
PICTURE
BACK LIGHT
MONITOR ID
RS-422 BAUD
DHCP
4K MODE
IP ADDR
MARKER
SUBNET
GATEWAY
GAIN G
PORT
GAIN B
IP APPLY
BIAS R
VOLUME
BIAS G
BIAS B
AUDIO
AUD CH
LVM TYPE
COLOR COPY
LVM SIZE
MARKER
DEFAULT
CENTER MARKER
USER CONFIG
SAFETY AREA
KEY LED
FIT MARKER
SDI OUT
MARKER MAT
SYSTEM
VERSION
MARKER COLOR
INPUT
THICKNESS
NETWORK
USER MARKER H1
MAC ADDR
USER MARKER H2
SW UPGRADE
UAER MARKER V1
USER MARKER V2
12 4K LCD Monitor
GROUP ID
FORCE PSF
GAIN R
MARKER
GPI
TIMECODE
TEMP
COLOR
GPI 1 ~ GPI 8
5. Menu Operations
[1] PICTURE
PICTURE
COLOR
MARKER
GPI
NETWORK
AUDIO
SYSTEM
●●
●●
●●
●●
●●
BRIGHT
CONTRAST
BACK LIGHT
TIMECODE
4K MODE
O
O
30
OFF
2 SAMPL INTL
BRIGHT
- Used to set the brightness(=offset) level
from -100 to 100.
CONTRAST
- Used to set the contrast(gain) level from
-100 to 100.
BACK LIGHT
- Used to control the brightness of the LCD
panel backlight from 0 to 127.
FORCE PSF
- Force PSF setting. The setting mode is ON, OFF.
4K MODE
- Used to set the 2 SAMPLE INTERLEAVE, 4
INPUT QUAD and SINGLE.
4K LCD Monitor 13
5. Menu Operations
[2] COLOR
PICTURE
COLOR
MARKER
GPI
NETWORK
AUDIO
SYSTEM
●●
●●
●●
●●
TEMP
GAIN R
GAIN G
GAIN B
BIAS R
BIAS G
BIAS B
COLOR COPY
6500K
0
0
0
0
0
0
-
TEMP
- Controls the color temperature and allows
instant access to preset the color temperature settings.
- Available color temperatures are 9300K,
6500K, 5600K, 5000K, 3200K and USER 1/2/3.
- In USER 1/2/3 modes, user can define custom RGB GAIN, BIAS and COLOR COPY
values.
GAIN R
- Used to set Red Gain(or Picture, Contrast)
level from -128 to 127.
- Adjusts the red color of bright section.
- Only available in Custom 1/2/3 mode.
GAIN G
- Used to set Green Gain(or Picture, Contrast)
level from -128 to 127.
- Adjusts the green color of bright section.
- Only available in Custom 1/2/3 mode.
GAIN B
- Used to set Blue Gain(or Picture, Contrast)
level from -128 to 127.
- Adjusts the blue color of bright section.
- Only available in Custom 1/2/3 mode.
14 4K LCD Monitor
●●
●●
●●
●●
BIAS R
- Used to set Red Bias(or Offset, mainly affects on Black level) from -128 to 127.
- Adjusts the red color of dark section.
- Only available in CUSTOM 1/2/3 mode.
BIAS G
- Used to set Green Bias(or Offset, mainly
affects on Black level) from -128 to 127.
- Adjusts the green color of dark section.
- Only available in CUSTOM 1/2/3 mode.
BIAS B
- Used to set Blue Bias(or Offset, mainly affects on Black level) from -128 to 127.
- Adjusts the blue color of dark section.
- Only available in CUSTOM 1/2/3 mode.
COLOR COPY
- Used to copy the R/G/B Gain value of prestored color temperature settings.
- In User mode, find and select the color temperature to be used with the UP/
DOWN button and press the Enter button
to copy and apply the Gain value to GAIN
RED, GAIN GREEN, GAIN BLUE.
- Only available in CUSTOM 1/2/3 mode.
5. Menu Operations
[3] MARKER
PICTURE
COLOR
MARKER
GPI
NETWORK
AUDIO
SYSTEM
●●
MARKER
CENTER MARKER
SAFETY AREA
FIT MARKER
MARKER MAT
MARKER COLOR
THICKNESS
USER MARKER H1
USER MARKER H2
USER MARKER V1
USER MARKER V2
MARKER
- Used to select the marker type when the
MARKER is displayed on the screen.
MODE
●●
●●
●●
OFF
OFF
OFF
OFF
OFF
WHITE
1
0
0
0
0
●● MARKER
: 4:3
●● SAFETY AREA : 90%
●● FIT MARKER : OFF
●●
●●
MARKER CLASS
HD
SD 16:9
16:9, 4:3, 15:9, 14:9, 13:9, 1.85:1,
2.35:1, USER
SD 4:3
16:9, 4:3, 15:9, 14:9, 13:9, 1.85:1,
2.35:1, USER
CENTER MARKER
- Used to select the availability of the CENTER MARKER on the screen.
SAFETY MARKER
- Used to select and control the size and availability of the SAFETY AREA.
- Available types are 80%, 85%, 88%, 90%,
93%, 100%, EBU ACTION 16:9, EBU GRAPHIC 16:9, EBU ACTION 14:9, EBU GRAPHIC 14:9, EBU ACTION 4:3 and EBU
GRAPHIC 4:3.
FIT MARKER
- Used to activate or inactivate the FIT MARKER function.
- When the Marker type is selected in the
Marker menu, a border line of the Safety
Area will be displayed inside the Marker.
- FIT MARKER ON/OFF displays as shown below.
●●
●●
●●
●●
●●
●● MARKER
: 4:3
●● SAFETY AREA : 90%
●● FIT MARKER : ON
MARKER MAT
- Used to set the darkness level outside of
the MARKER area.
- Available values are from OFF(transparent)
to 7(Black).
MARKER COLOR
- Used to control the color of MARKER lines.
- Available colors are White, Yellow, Cyan,
Green, Magenta, Red, Blue, Black and Adaptive.
THICKNESS
- The item controls the thickness of the
MARKER lines.
- The degrees of thickness are between 1 ~ 4.
USER MARKER H1
- Used to set the position of the first horizontal marker line.
- Displayed when MARKER menu is set to
USER.
USER MARKER H2
- Used to set the position of the second horizontal marker line.
- Displayed when MARKER menu is set to
USER.
USER MARKER V1
- Used to set the position of the first vertical
marker line.
- Displayed when MARKER menu is set to USER.
USER MARKER V2
- Used to set the position of the second vertical marker line.
- Displayed when MARKER menu is set to
USER.
4K LCD Monitor 15
5. Menu Operations
[4] GPI
PICTURE
COLOR
MARKER
GPI
NETWORK
AUDIO
SYSTEM
●●
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN 7
PIN 8
GROUP ID
MONITOR ID
RS-422 BAUD
NONE
SDI A
SDI B
16:9 MAR
15:9 MAR
14:9 MAR
POW ON/OFF
GND
0
0
9600
GPI 1 ~ 8
- This item activates/ deactivates the REMOTE function.
- The user may designate a function for each pin and each pin’s default setting is as
follows.
PIN 1 : HDMI
PIN 2 : SDI-A
PIN 3 : SDI-B
PIN 4 : 16:9 MAR
PIN 5 : 15:9 MAR
PIN 6 : 14:9 MAR
PIN 7 is Power ON/OFF use only, GPI 8 is
GND.
- Each pin’s location is as below.
REMOTE (RJ-45)
1: Pin1
2: Pin2
3: Pin3
4: Pin4
5: Pin5
6: Pin6
7: Pin7
8: GND
16 4K LCD Monitor
1
8
●●
The selectable functions for PIN 1~ PIN 6
are as follows:
Menu
Classification
PIN
1~6
Settable Values
NONE,
SDI-A,
SDI-B,
HDMI,
16:9 MARKER,
4:3 MARKER,
15:9 MARKER,
14:9 MARKER,
13:9 MARKER,
1.85:1 MARKER,
2.35:1 MARKER,
CENTER MARKER,
SAFETY AREA 80%,
SAFETY AREA 85%,
SAFETY AREA 88%,
SAFETY AREA 90%,
SAFETY AREA 93%,
SAFETY AREA 100%
PIN 7
POWER ON/OFF CONTROL
PIN 8
GND
5. Menu Operations
[5] NETWORK
PICTURE
COLOR
MARKER
GPI
NETWORK
AUDIO
SYSTEM
●●
●●
●●
●●
●●
●●
DHCP
IP (D)
SUBNET
GATWAY
PORT
IP APPLY
[6] AUDIO
DHCP
192.168.101.156
255.255.255.000
192.168.101.001
10262
NO
DHCP
- Used to activate/deactivate the DHCP function.
IP (D)
- Used to set the IP Address connected to a
Monitor.
PICTURE
COLOR
MARKER
GPI
NETWORK
AUDIO
SYSTEM
●●
●●
SUBNET
- Used to set the Subnet Mask connected to
a Monitor.
GATWAY
- Used to set the Gateway number connected to a Monitor.
PORT
- Used to set the port number. Default value
is 10262.
IP APPLY
- Use to apply changed value of IP Address,
Subnet mask, Gateway and Port no.
●●
●●
VOLUME
AUD CH
LVM TYPE
LVM SIZE
15
GR1 CH1+CH2
OFF
MID
VOLUME
- Used to control the audio volume. Control
range is from 0 to 30 and the default value
is 15.
AUD CH
- Used to set the audio channel.
- Available ranges are GR1 CH1+CH2, GR1
CH3+CH4, GR2 CH1+CH2, GR2 CH3+CH4,
GR3 CH1+CH2, R3 CH3+CH4, GR4
CH1+CH2 and GR4 CH3+CH4.
LVM TYPE
- Used to set the audio type.
- Available options are OFF, BOTH H, LEFT H,
RIGHT H, BOTH V, LEFT V and RIGHT V.
LVM SIZE
- Used to control the size of the Audio Level
Meters.
- Available modes are TINY, MID and TALL.
4K LCD Monitor 17
5. Menu Operations
[7] SYSTEM
PICTURE
COLOR
MARKER
GPI
NETWORK
AUDIO
SYSTEM
●●
●●
●●
●●
●●
●●
DEFAULT
USER CONFIG
KEY LED
SDI OUT
VERSION
INPUT
NETWORK
MAC ADDR
SW UPGRADE
NO
USER 1
YES
BY PASS
S04.F04.H05
NO INPUT
DHCP 100M
20:84:8C
DEFAULT
- Used to initialize OSD values to factory
default except for the value of the BACK
LIGHT.
USER CONFIG
- Used to save and apply in three kinds of
user configurations.
- Available modes are USER1, USER2 and USER3.
- All items can be assignable for each USER1,
USER2 and USER3 settings.
KEY LED
- Used to control the Key Lamp on the front
of the monitor.
SDI OUT
- Used to change the Throughout on the
rear of the monitor to BY PASS or 12G output.
- In BY PASS mode, the selected channel’s
image is output as it is.
- In 12G signal, output signal is changed to
12G.
VERSION
- Displays the current program version of
the product.
- S : Firmware / F : FPGA / H : Hardware.
INPUT
- Displays the current input format.
18 4K LCD Monitor
●●
●●
●●
NETWORK
- Displays the current network connection
setting.
MAC ADDR
- Displays the current network MAC ADDR.
SW UPGRADE
- Used to upgrade the firmware using the
USB (Thumb drive).
- Available options are CPU, FPGA. When CPU or FPGA is selected, only each
program can be upgraded at a time.
6. Firmware Upgrade
[1] FIRMWARE UPGRADE
●●
●●
The USB(Thumb drive) which contains the
F/W file is needed for Firmware Upgrade.
Select the SW UPGRADE in the SYSTEM
menu.
1. Connect the USB to the USB Slot on the
front of the monitor.
2. Select what to update among CPU / FPGA
/ ALL in [S/W UPGRADE].
3. When the USB connection is completed,
the S/W upgrade starts and the progress
displays on the bottom left side of the
screen.
4. If the USB doesn’t connect properly or
there is no file in the specified location,
the error message will be displayed on
the bottom left side of the screen and the
upgrade won’t start.
5. In that case, check the USB or the file location and try again.
●●
After USB connection, turn off and then
on the monitor. The upgrade will activate
automatically.
4K LCD Monitor 19
7. Video Support Resolution
VIDEO SUPPORT RESOLUTION
Input Signal Interfaces
Signal Format (12G SDI)
12G-SDI single link(4k)
3840x2160 (50/59.94/60p)
Input Signal Interfaces
Signal Format (6G SDI)
6G-SDI single link(4k)
3840x2160 (23.98/24/25/29.97/30p)
Input Signal Interfaces
Signal Format (3G_A SDI)
3G-SDI single link
1920x1080 (50/59.94/60p)
Input Signal Interfaces
Signal Format (3G_B SDI)
3G-SDI single link
1920x1080 (50/59.94/60p)
(23.98/24/25/29.97/30p)
(50/59.94/60I)
(25/29.97/30psf)
Input Signal Interfaces
Signal Format (3G_A SDI)
3G-SDI Quad link(4k)
3G-SDI
2-Sample Interleave
Quad link(4k)
20 4K LCD Monitor
YCbCr 4:2:2 10bit
YCbCr 4:2:2 10bit
YCbCr 4:2:2 10bit
YCbCr 4:2:2 10bit
YCbCr 4:4:4 10/12bit
YCbCr 4:2:2 10bit
YCbCr 4:2:2 10bit
RGB 4:4:4 10/12bit
3840x2160(50/59.94/60p)
YCbCr 4:2:2 10bit
3840x2160(50/59.94/60p)
YCbCr 4:2:2 10bit
7. Video Support Resolution
VIDEO SUPPORT RESOLUTION
Input Signal Interfaces
Signal Format (HD SDI)
HD SDI single link
1920x1080
(23.98/24/25/29.97/30p)
(50/59.94/60I)
(25/29.97/30psf)
1280x720
(50/59.94/60P)
Input Signal Interfaces
Signal Format (HD-SDI)
HD-SDI Quad link(4k)
3840x2160 (23.98/24/25/29.97/30p)
YCbCr 4:2:2 10bit
HD-SDI
2-Sample Interleave
Quad link(4k)
3840x2160 (23.98/24/25/29.97/30p)
YCbCr 4:2:2 10bit
Input Signal Interfaces
Signal Format (SD SDI)
SD SDI single link
720x487 (59.94i)
720x576 (50i)
Input Signal Interfaces
Signal Format (HDMI)
1280x720(50/59.94/60p)
1920x1080(50/59.94/60p)
1920x1080(23.98/24/25
/29.97/30p60i/59.94i/50i)
YCbCr 4:2:2 10bit
YCbCr 4:2:2 10bit
YCbCr 4:2:2 10bit
YCbCr 4:2:2 10bit
YCbCr 4:2:2 10bit
YCbCr 4:2:2 10bit
* HDMI
RGB 4:4:4 8bit
YCbCr 4:4:4 8bit
YCbCr 4:2:2 8bit
RGB 4:4:4 8bit
YCbCr 4:4:4 8bit
YCbCr 4:2:2 8bit
HDMI Single link
3840x2160
(23.98/24/25/29.97/30p)
RGB 4:4:4 10bit
YCbCr 4:4:4 10bit
YCbCr 4:2:2 10bit
RGB 4:4:4 12bit
YCbCr 4:4:4 12bit
YCbCr 4:2:2 12bit
3840x2160
(50/59.94/60p)
RGB 4:4:4 8,10,12bit
YCbCr 4:2:2 8,10,12bit
YCbCr 4:2:0 8bit
4K LCD Monitor 21
8. Product Specifications
LUM-550M
LCD
Input
Output
Input Signal
SDI Input Signal
Formats
Size
Resolution
Pixel Pitch
Color Depth
Viewing Angle
Luminance of white
Contrast Ratio
Display Area
1 x HDMI
4 x BNC
1 x BNC
12G-SDI
6G-SDI
3G-SDI
HD-SDI
HDMI
SMPTE ST2082-10
Mode1
SMPTE ST2081-10
Mode1
SMPTE ST425-5
SMPTE ST274
SMPTE ST425
SMPTE-274M
SMPTE-296M
SMPTE-259M
V2.0
V1.4
HDMI Input Signal
Formats
V1.2
Audio In
Audio Out
Power
Power Consumption (Approx.)
Operating Temperature
Storage Temperature
Main Body Dimensions (mm/inch)
Main Body Dimensions with stand (mm/inch)
Weight
Basic Accessories
Optional Accessories
55”
3840(H) x 2160(V) Pixels, RGBW stripe arrangement
0.315(H) x 0.315(W) mm
1.07B colors
H : 178 degrees / V : 178 degrees
500 cd/ m2 (Center 1point ,Typ.)
1100:1
1209.6(H) x 680.4(V) mm
HDMI V2.0 Input 1Ch
12G/3G/HD/SD SDI Input 2Ch
3G/HD/SD SDI Input 2Ch
12G/3G/HD/SD SDI Output 1Ch
By Pass Mode : SDI A/B Channel (Active Through Out)
12G Mode : 3840x2160 60p/59.94p/50p (All Input Format Converted to 12G-SDI)
12Gb/s
6Gb/s
2.970Gb/s
1.485Gbps
720p/1080p/2160p
3840x2160 60p/59.94p/50p (12G-SDI x 1Ch)
3840x2160 30p/29.97p/25p/24p*/23.98p* (6G-SDI x 1Ch)
3840x2160 60p/59.94p/50p (3G-SDI x 4Ch)
3840x2160 30p/29.97p/25p/24p*/23.98p* (HD-SDI x 4Ch)**
1920x1080 60p/59.94p/50p (3G-SDI LEVEL A)
1920x1080 60i/59.94i/50i/30p/29.97p/25p/24p*/23.98p* (3G-SDI LEVEL B)
1280x720 60p/59.94p/50p (3G-SDI LEVEL B)
1920x1080 60i/59.94i/50i/30p/29.97p/25p/24p*/23.98p*
1280x720 60p/59.94p/50p
720x487 59.94i
720x576 50i
* 24P/23.97P : 60p/59.94p Frame-rate Converted Display
** Not support 2 Sample Interleaved Input
3840x2160 60p/59.94p/50p (RGB/YCbCr 4:4:4 8bpp Mode)
3840x2160 30p/29.97p/25p/24p*/23.98p* (RGB/YCbCr 4:4:4 8bpp Mode)
1920x1080 60i/59.94i/50i/30p/29.97p/25p/24p*/23.98p*
(RGB/YCbCr 4:4:4 8bpp Mode) 60p/59.94p/50p
1280x720 60p/59.94p/50p (RGB/YCbCr 4:4:4 8bpp Mode)
* 24P/23.97P : 60p/59.94p Frame-rate Converted Display
SDI Embedded Audio (Group, Ch Selectable)
External Output Port (3.5m Phone Jack)
100~240V, 1.3~0.6A/ 50/60Hz
150 Watts (Max.)
0℃ to 40℃ (32℉ to 104℉)
-20℃ to 50℃ (-4℉ to 140℉)
1237.8x728.5x70 (48.73x28.68x2.76)
1237.8x786.5x309.4 (48.73x31x12.18)
31Kg / 66.14lbs
AC Power cord, Remote Control, Stand
* The specification above may be changed without notice.
22 4K LCD Monitor
8. Product Specifications
LUM-430M
LCD
Input
Output
Size
Resolution
Pixel Pitch
Color Depth
Viewing Angle
Luminance of white
Contrast Ratio
Display Area
Response Time
1 x HDMI
4 x BNC
1 x BNC
SMPTE ST2082-10
Mode1
SMPTE ST2081-10
Mode1
SMPTE ST425-5
SMPTE ST274
SDI Input Signal
Formats
SMPTE ST425
SMPTE-274M
SMPTE-296M
SMPTE-259M
V2.0
V1.4
HDMI Input Signal
Formats
V1.2
Audio In
Audio Out
Power
Power Consumption (Approx.)
Operating Temperature
Storage Temperature
Main Body Dimensions (mm/inch)
Main Body Dimensions with stand (mm/inch)
Weight
Basic Accessories
Optional Accessories
43”
3840 horiz. by 2160 vert. Pixels, RGB stripe arrangement
0.2451 mm x 0.2451 mm
10bit(D), 1.06 Billon colors
Viewing angle free ( R/L 178 (Min.), U/D 178 (Min.))
350cd/m2 (Center 1point ,Typ.)
1,000 : 1
42.51 inches(1,079.75 mm) diagonal
Variation : 6ms / Gray to Gray(BW) : 8ms
HDMI V2.0 Input 1Ch
12G/3G/HD/SD SDI Input 2Ch
3G/HD/SD SDI Input 2Ch
12G/3G/HD/SD SDI Output 1Ch
By Pass Mode : SDI A/B Channel (Active Through Out)
12G Mode : 3840x2160 60p/59.94p/50p (All Input Format Converted to 12G-SDI)
3840x2160 60p/59.94p/50p (12G-SDI x 1Ch)
3840x2160 30p/29.97p/25p/24p*/23.98p* (6G-SDI x 1Ch)
3840x2160 60p/59.94p/50p (3G-SDI x 4Ch)
3840x2160 30p/29.97p/25p/24p*/23.98p* (HD-SDI x 4Ch)**
1920x1080 60p/59.94p/50p (3G-SDI LEVEL A)
1920x1080 60i/59.94i/50i/30p/29.97p/25p/24p*/23.98p* (3G-SDI LEVEL B)
1280x720 60p/59.94p/50p (3G-SDI LEVEL B)
1920x1080 60i/59.94i/50i/30p/29.97p/25p/24p*/23.98p*
1280x720 60p/59.94p/50p
720x487 59.94
720x487 59.94
* 24P/23.97P : 60p/59.94p Frame-rate Converted Display
** Not support 2 Sample Interleaved Input
3840x2160 60p/59.94p/50p (RGB/YCbCr 4:4:4 8bpp Mode)
3840x2160 30p/29.97p/25p/24p*/23.98p* (RGB/YCbCr 4:4:4 8bpp Mode)
1920x1080 60i/59.94i/50i/30p/29.97p/25p/24p*/23.98p*
(RGB/YCbCr 4:4:4 8bpp Mode) 60p/59.94p/50p
1280x720 60p/59.94p/50p (RGB/YCbCr 4:4:4 8bpp Mode)
* 24P/23.97P : 60p/59.94p Frame-rate Converted Display
SDI Embedded Audio (Group, Ch Selectable)
External Output Port (3.5m Phone Jack)
100~240V, 50/60Hz
TBD
0℃ to 40℃ (32℉ to 104℉)
-20℃ to 60℃ (-4℉ to 140℉)
985 x 587 x 87.4(mm) / 38.77 x 23.11 x 3.44(inch)
985 x 635.6 x 309.4(mm) / 98.77 x 25.02 x 12.18(inch)
23.0kg / 50.70(lbs)
AC Power Cable
Carrying Caes.
* The specification above may be changed without notice.
4K LCD Monitor 23
FOR MORE INFORMATION PLEASE VISIT : http://www.tvlogic.tv
부사장
12F, ACE HIGH-END 8, 84 Gasan-digital 1-ro, Geumcheon-gu, Seoul, 18590, KOREA
TEL : +82-70-8668-6611, FAX : 82-2-6123-3201,
E-mail : sales@
t vlogic.co.kr
153-802 서울특별시
금천구 가산동
345-4
조 성 일
에이스하이엔드 8차 12층
">