Addendum - Black & Decker Service Technical Home Page

Addendum - Black & Decker Service Technical Home Page
ADDENDUM TO CHS600-XE INSTRUCTIONS FOR AUSTRALIA AND NEW ZEALAND ONLY
Charging base use and wall mounting.
FUNCTIONAL
DESCRIPTION - Figure A
1. On/off switch
2. Lock-off button
3. Charging socket
4. Shoe
5. Blade clamp release lever
6. Charger
7. Wall mounting bracket
8. Saw blade storage
9. LED Charging Indicator
B
A
2
4
5
1
3
8
6
9
7
C
7
10
10
3
D
New Zealand
Black & Decker
5 Te Apunga Place
Mt. Wellington.
Auckland 1060
Tel. +64 9 259 1111
Fax. +64 9 259 1122
ASSEMBLY
HANGING THE WALL MOUNTING BRACKET
Use the hardware provided only if hanging on conventional hollow wall construction such
as sheet rock or plaster walls. If not hanging on conventional sheet rock or plaster walls,
please use the appropriate fasteners for that material.
• Locate the charging base within reach of an electrical outlet.
• Mark the position of both hang holes.
• Drill appropriate sized holes.
• Insert supplied hardware through hang holes and attach bracket to wall. Check to see
that the charging base is firmly attached to the wall so it will not pull out.
• Plug in and place the product in position.
NOTE: Avoid damaging the cord while fixing the mounting bracket to the wall.
Page 1 of 1
Sheet Number
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement