Ericsson-LG iPECS LDP-9030D Handset User Guide Your Communications Solution LDP-9030D Button Layout 2. Soft Buttons 3. Flexible (‘Flex’) buttons } 1. LCD Screen 4. 4. 5. 6. 7. 8. 9. 10. Volume 11. Speaker 12. Hold/Save Button Guide LCD Screen: phone interface for status, dialing directories, and message information. 2. Soft Buttons: these buttons are interactive and have a changing function based on the phone’s status 3. Flex Buttons: a line or feature can be assigned to these buttons. 4. Page: scroll through the soft button functions on the LCD screen 5. Transfer: transfer the current active call or access the PGM (program) menu while the phone is idle. 6. Speed: assign or use assigned speed dial numbers. 7. DND (Do-Not-Disturb): blocks incoming calls. You can also activate Do-Not-Disturb while the phone is ringing. 8. Call back: initiate a call back request to a busy station. Once that station becomes idle, the initiating station is signaled. 9. Mute: mute the call so that the caller cannot hear your voice. 10. Volume control: adjust the Ring, Headset, Handset, and Speaker volume. 11. Speakerphone: toggle the speakerphone On and Off during a call. The button will automatically illuminate when the phone is in menu mode. 12. Hold/Save: place a call on hold or use to save information when programming. 1. Dealing with calls Answering an Incoming Call Lift the handset and press the flashing flex button (as needed) Making an External Call Press a free Loop/Line flex button or the 9 button to pick up an outside line. Once you have the outside line, dial your number. Making an Internal Call Lift the handset. Dial the extension number or press the flex button assigned to the contact. Rejecting a Call Press the DND button when a call comes in - the caller will get a fast busy tone. Call Pick Up Lift the handset and dial ** to pick up any handset in your group, if it is not in your group dial 7 and then the intercom number of the ringing handset. Call Forwarding Placing a call on hold Press the Hold/Save button. To reconnect the call, press the green flashing Loop/Line flex button. Quick access call tools Speed Dial Last Number Redial (LNR) Lift the handset Press the Speed button Dial the desired System or Station Speed Dial number Lift the handset. Select the REDIAL soft button Use the Volume keys to select from the last 10 numbers dialed Press Hold/Save or the SEND soft button to dial Call waiting Camp On When dialing an extension that is engaged, the Camp On feature allows the station to be notified that there is a call waiting. Press * to wait off-hook. Transferring a call Transferring a Call Returning to Caller from a Transfer Press the Transfer button. Dial the extension number, external number or press the programmed flex button. Either speak to the recipient to announce the call or simply hang up. Press the green flashing Loop/Line flex button. Features Do-Not-Disturb Makes your extension unavailable for calls Ad Hoc Conference Calls (3 way calling) Press DND button to activate. Press DND button again to deactivate. Please note that this is not available on the attendant handset. To call the first party, follow “Making an External/internal Call” above for instructions. Once connected press the CONF soft button once. Call the second party (as above). Once connected, press the CONF soft button twice to connect the calls. To place a conference call on hold, press the Hold/Save button. Press again to retrieve the conference. Programming Call Forward Routes your calls to another extension/ group/speed dial (this will override your voicemail functions.) Lift the handset. Press the FWD soft button. Dial the type of forward code 1-4. Dial the destination number. To deactivate, follow the first two steps then Dial #.