Nokia Nseries N95 mobile phone User guide

Nokia N95 User guide
9205513
ISSUE 1 EN
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-159 product is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/
EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/
phones/declaration_of_conformity/.
© 2007 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nseries, N95, and Visual Radio are trademarks or
registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia
Corporation. Other product and company names mentioned herein may be
trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this
document in any form without the prior written permission of Nokia is prohibited.
This product includes software licensed from Symbian
Software Ltd (c) 1998-2007. Symbian and Symbian OS are
trademarks of Symbian Ltd.
Java and all Java-based marks are trademarks or registered trademarks
of Sun Microsystems, Inc.
US Patent No 5818437 and other pending patents. T9 text input software Copyright
(C) 1997-2007. Tegic Communications, Inc. All rights reserved.
Portions of the Maps software are copyright © 2007 The FreeType Project. All rights
reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for
personal and noncommercial use in connection with information which has been
encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged
in a personal and noncommercial activity and (ii) for use in connection with
MPEG-4 video provided by a licensed video provider. No license is granted or shall
be implied for any other use. Additional information, including that related to
promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC.
See <http://www.mpegla.com>.
Nokia operates a policy of ongoing development. Nokia reserves the right to make
changes and improvements to any of the products described in this document
without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO
CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR
ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL
OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED ‘AS IS’. EXCEPT AS REQUIRED
BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN
RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT.
NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY
TIME WITHOUT PRIOR NOTICE.
The availability of particular products and applications and services for these
products may vary by region. Please check with your Nokia dealer for details, and
availability of language options.
Export controls
This device may contain commodities, technology or software subject to export
laws and regulations from the US and other countries. Diversion contrary to law is
prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation. Any changes or modifications not expressly approved by Nokia
could void the user's authority to operate this equipment.
The third-party applications provided with your device may have been created and
may be owned by persons or entities not affiliated with or related to Nokia. Nokia
does not own the copyrights or intellectual property rights to the third-party
applications. As such, Nokia does not take any responsibility for end-user support,
functionality of the applications, or the information in the applications or these
materials. Nokia does not provide any warranty for the third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE
PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER
ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY
REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY
THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
Issue 1 EN, 9205513
Contents
For your safety...........................................7
Web browser ...........................................20
Support .....................................................10
Connection security............................................................ 20
Bookmarks view................................................................... 20
Browse the web................................................................... 21
End connection.................................................................... 24
Settings.................................................................................. 24
Help ........................................................................................10
Nokia support and contact information .......................10
Get started ............................................................................10
Additional applications......................................................10
Your Nokia N95.......................................11
Software updates ................................................................11
Settings ..................................................................................11
Welcome ................................................................................11
Transfer content from another device...........................11
Essential indicators.............................................................13
Fast downloading ................................................................14
Volume and loudspeaker control ....................................14
Multimedia menu................................................................14
Keypad lock (keyguard)......................................................15
Gameplay...............................................................................15
Headset ..................................................................................16
Memory card.........................................................................16
File manager ........................................................................18
Download! ............................................................................19
Connections..............................................26
Wireless LAN ........................................................................ 26
Connection manager ......................................................... 28
Bluetooth connectivity ..................................................... 28
Infrared connection ........................................................... 32
USB ........................................................................................ 32
PC connections .................................................................... 33
Synchronisation .................................................................. 33
Device manager .................................................................. 33
Modem .................................................................................. 34
Media applications ..................................35
Music player ........................................................................ 35
Radio ..................................................................................... 39
Nokia Podcasting ............................................................... 41
Video centre ........................................................................ 44
RealPlayer .............................................................................47
Adobe .....................................................................................48
Nokia Lifeblog .....................................................................48
Camera..................................................... 51
Take pictures.........................................................................51
Take pictures in a sequence..............................................56
You in the picture—self-timer .........................................56
Record videos........................................................................57
Gallery ..................................................... 60
View and browse files ........................................................60
Print Basket...........................................................................62
Albums....................................................................................62
Edit images............................................................................63
Edit video clips .....................................................................64
Slide show .............................................................................64
TV out mode..........................................................................64
Presentations ........................................................................65
Image print............................................................................65
Print online............................................................................66
Share online ..........................................................................67
Home network .....................................................................67
About satellite signals ....................................................... 72
Position requests ................................................................. 73
Maps ...................................................................................... 73
Landmarks ............................................................................ 78
GPS data ............................................................................... 79
Personalise your device ...........................81
Profiles—set tones .............................................................. 81
3-D tones ............................................................................. 82
Change the look of your device ..................................... 83
Active standby mode.......................................................... 84
Time management ...................................85
Clock ...................................................................................... 85
Calendar ............................................................................... 85
Messaging ...............................................88
Write text .............................................................................. 89
Write and send messages ................................................. 89
Inbox—receive messages .................................................. 90
Mailbox ................................................................................. 91
View messages on a SIM card ......................................... 93
Messaging settings............................................................. 93
Positioning............................................... 71
Make calls ................................................98
GPS receiver ..........................................................................72
Voice calls ............................................................................. 98
Video calls ...........................................................................100
Video sharing..................................................................... 102
Answer or decline a call ................................................. 104
Log ....................................................................................... 105
Contacts (Phonebook) ......................... 107
Save and edit names and numbers ............................. 107
Copy contacts.................................................................... 108
Add ringing tones for contacts..................................... 109
Create contact groups .................................................... 109
Office..................................................... 110
Quickoffice ........................................................................ 110
Notes ................................................................................... 111
Recorder ............................................................................. 111
Adobe Reader ................................................................... 111
Calculator .......................................................................... 112
Converter ........................................................................... 112
Zip manager ...................................................................... 112
Wireless Keyboard ........................................................... 113
Barcode reader ................................................................. 113
Tools....................................................... 115
Application manager .......................................................115
Digital rights management ...........................................117
Voice commands ..............................................................118
Settings ................................................ 119
General ................................................................................119
Phone ..................................................................................124
Connection ........................................................................126
Applications .......................................................................130
Troubleshooting: Q&A ......................... 131
Battery information ............................. 135
Charging and discharging...............................................135
Nokia battery authentication guidelines ...................135
Care and maintenance ......................... 137
Additional safety information............. 138
Index ...................................................... 141
For your safety
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for
further information.
SWITCH OFF WHEN REFUELING Do not use
the device at a refueling point. Do not use near
fuel or chemicals.
SWITCH ON SAFELY Do not switch the device
on when wireless phone use is prohibited or
when it may cause interference or danger.
SWITCH OFF NEAR BLASTING Follow any
restrictions. Do not use the device where
blasting is in progress.
ROAD SAFETY COMES FIRST Obey all local
laws. Always keep your hands free to operate
the vehicle while driving. Your first
consideration while driving should be road
safety.
USE SENSIBLY Use only in the normal
position as explained in the product
documentation. Do not touch the antenna
unnecessarily.
INTERFERENCE All wireless devices may be
susceptible to interference, which could affect
performance.
SWITCH OFF IN HOSPITALS Follow any
restrictions. Switch the device off near medical
equipment.
SWITCH OFF IN AIRCRAFT Follow any
restrictions. Wireless devices can cause
interference in aircraft.
QUALIFIED SERVICE Only qualified personnel
may install or repair this product.
ENHANCEMENTS AND BATTERIES Use only
approved enhancements and batteries. Do not
connect incompatible products.
WATER-RESISTANCE Your device is not
water-resistant. Keep it dry.
BACK-UP COPIES Remember to make backup copies or keep a written record of all
important information stored in your device.
7
CONNECTING TO OTHER DEVICES When
connecting to any other device, read its user
guide for detailed safety instructions. Do not
connect incompatible products.
EMERGENCY CALLS Ensure the phone
function of the device is switched on and in
service. Press the end key as many times as
needed to clear the display and return to the
standby mode. Enter the emergency number,
then press the call key. Give your location. Do
not end the call until given permission to do so.
About your device
The wireless device described in this guide is approved for
use on the (E)GSM 850, 900, 1800, and 1900 and UMTS
2100 networks. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws and
respect local customs, privacy and legitimate rights of
others, including copyrights.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred, or forwarded.
Your device supports internet connections and other
methods of connectivity. Like computers, your device may
8
be exposed to viruses, malicious messages and
applications, and other harmful content. Exercise caution
and open messages, accept connectivity requests,
download content, and accept installations only from
trustworthy sources. To increase the security of your
device, consider installing antivirus software with a regular
update service and using a firewall application.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on.
Do not switch the device on when wireless device use
may cause interference or danger.
The office applications support common features of
Microsoft Word, PowerPoint, and Excel (Microsoft Office
2000, XP, and 2003). Not all file formats can be viewed or
modified.
During extended operation, such as an active video sharing
session or high-speed data connection, the device may feel
warm. In most cases, this condition is normal. If you
suspect the device is not working properly, take it to the
nearest authorised service facility.
Your device may have preinstalled bookmarks and links for
third-party internet sites. You may also access other thirdparty sites through your device. Third-party sites are not
affiliated with Nokia, and Nokia does not endorse or
assume liability for them. If you choose to access such
sites, you should take precautions for security or content.
The images in this guide may differ from your device
display.
Network services
To use the phone you must have service from a wireless
service provider. Many of the features require special
network features. These features are not available on all
networks; other networks may require that you make
specific arrangements with your service provider before
you can use the network services. Your service provider can
give you instructions and explain what charges will apply.
Some networks may have limitations that affect how you
can use network services. For instance, some networks may
not support all language-dependent characters and
services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
these features will not appear on your device menu. Your
device may also have a special configuration such as
changes in menu names, menu order, and icons. Contact
your service provider for more information.
Enhancements, batteries, and
chargers
Always switch the device off and disconnect the charger
before removing the battery.
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from a DC-4, AC-4, or AC-5 charger and from
an AC-1, ACP-8, ACP-9, ACP-12, or LCH-12 charger when
used with the CA-44 charger adapter.
The battery intended for use with this device is BL-5F.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
This device supports WAP 2.0 protocols (HTTP and SSL) that
run on TCP/IP protocols. Some features of this device, such
as MMS, browsing, and e-mail require network support for
these technologies.
9
Support
Support
Model number: Nokia N95-1
Hereinafter referred to as Nokia N95.
Help
Your device has context-sensitive help. When an
application is open, select Options > Help to access help
for the current view.
For maintenance services, check your nearest Nokia service
center at www.nokia.com/repair.
Get started
When you are reading the instructions, to switch between
help and the application that is open in the background,
press and hold .
See the Get started guide for keys and parts information
and instructions for setting up the device for use.
To open help from the main menu, select Tools >
Utilities > Help. Select the desired application to view its
help topics.
Additional applications
Nokia support and contact
information
Check www.nseries.com/support or your local Nokia
website for the latest version of this guide, additional
information, downloads, and services related to your Nokia
product.
10
On the website, you can get information on the use of
Nokia products and services. If you need to contact
customer service, check the list of local Nokia contact
centers at www.nokia.com/customerservice.
There are various applications provided by Nokia and
different third-party software developers to help you do
more with your Nokia N95. These applications are
explained in the Additional applications leaflet which is
available at the Nokia N95 product support pages at
www.nseries.com/support or your local Nokia web site.
Software updates
Welcome
Nokia may produce software updates that may offer new
features, enhanced functions, or improved performance.
You may be able to request these updates through the
Nokia Software Updater PC application. To update the
device software, you need the Nokia Software Updater
application and a compatible PC with Microsoft Windows
2000, XP, or Vista operating system, broadband internet
access, and a compatible data cable to connect your device
to the PC.
When you switch on your device for the first time,
Welcome opens. Select from the following:
• Sett. wizard—to configure various settings. See the
Additional applications leaflet.
• Phone switch—to transfer content, such as contacts
and calendar entries, from a compatible Nokia device.
See ‘Transfer content from another device’, p. 11.
To get more information and to download the Nokia
Software Updater application, visit www.nokia.com/
softwareupdate or your local Nokia web site.
Settings
Your device normally has MMS, GPRS, streaming, and
mobile internet settings automatically configured in the
device, based upon your wireless service provider
information. You may have settings from your service
providers already installed in your device, or you may
receive or request the settings from the service providers
as a special message.
Your Nokia N95
Your Nokia N95
To open the Welcome later, press , and select Tools >
Utilities > Welcome. You can also access the individual
applications in their own menu locations.
For more information on Settings wizard, see the guides
for your device at www.nseries.com/support or your local
Nokia website.
Transfer content from
another device
You can transfer content, such as contacts, from a
compatible Nokia device to your Nokia N95 using
Bluetooth connectivity or infrared. Your device notifies you
if the other device is not compatible.
11
Your Nokia N95
12
The type of content that can be transferred depends on the
model of the device from which you want to transfer
content. If the other device supports synchronisation, you
can also synchronise data between the other device and
your Nokia N95.
If the other device cannot be powered on without a SIM
card, you can insert your SIM card in it. When Nokia N95
is switched on without a SIM card, the offline profile is
automatically activated.
Transfer content
1 To use the application for the first time, on your Nokia
N95, select it in the Welcome application, or press ,
and select Tools > Utilities > Switch. If you have used
the application before and want to start a new transfer,
select Phone switch.
2 Select whether you want to use Bluetooth connectivity
or infrared to transfer the data. Both devices must
support the selected connection type.
3 If you select Bluetooth connectivity:
To have Nokia N95 search for devices with Bluetooth
connectivity, select Continue. Select the device from
which you want to transfer content from the list. You
are asked to enter a code on your Nokia N95. Enter a
code (1-16 digits), and select OK. Enter the same code
on the other device, and select OK. The devices are now
paired. See ‘Pair devices’, p. 30.
For some phone models, the Phone switch application
is sent to the other device as a message. To install
Phone switch on the other device, open the message,
and follow the instructions on the display.
If you select infrared, connect the two devices. See
‘Infrared connection’, p. 32.
4 From your Nokia N95, select the content you want to
transfer from the other device.
Content is transferred from the memory of the other device
to the corresponding location in your Nokia N95.
Transferring time depends on the amount of data to be
transferred. You can cancel transferring and continue
later.
If the other device supports synchronisation, you can keep
the data up-to-date in both devices. To start a
synchronisation with a compatible Nokia device, select
Phones, scroll to the device, and select Options >
Synchronise. Follow the instructions on the display.
The synchronisation is two-way, and the data in both
devices is made the same. If an item is deleted from either
device, it is deleted from the other device as well when
synchronising; you cannot restore deleted items with
synchronisation.
To view the log of a previous transfer, select Transfer log.
The device is being used in a GSM network.
The device is being used in a UMTS network (network
service).
You have one or more unread messages in the Inbox
folder in Messaging.
You have received new e-mail in the remote mailbox.
There are messages waiting to be sent in the Outbox
folder.
You have missed calls.
Shown if Ringing type is set to Silent and Message
alert tone, and E-mail alert tone are set to Off.
The device keypad is locked.
A clock alarm is active.
The second phone line is being used (network service).
All calls to the device are diverted to another
number. If you have two phone lines (network service), a
number indicates the active line.
A compatible headset is connected to the device.
A compatible TV out cable is connected to the device.
A compatible Text phone is connected to the device.
A data call is active.
A GPRS packet data connection is active.
indicates
the connection is on hold and
that a connection is
available.
A packet data connection is active in a part of the
network that supports EGPRS. indicates the connection
is on hold and
that a connection is available. The icons
indicate that EGPRS is available in the network, but your
device is not necessarily using EGPRS in the data transfer.
Your Nokia N95
Essential indicators
A UMTS packet data connection is active.
indicates
the connection is on hold and
that a connection is
available.
You have set the device to scan for wireless LANs, and
a wireless LAN is available. See ‘Wireless LAN’, p. 26.
A wireless LAN connection is active in a network that
has encryption.
A wireless LAN connection is active in a network that
does not have encryption.
Bluetooth connectivity is on.
Data is being transmitted using Bluetooth
connectivity. When the indicator is blinking, your device is
trying to connect with another device.
A USB connection is active.
13
Your Nokia N95
An infrared connection is active. If the indicator is
blinking, the device is trying to connect to the other device
or the connection has been lost.
Fast downloading
You can activate or deactivate support for high-speed
downlink packet access (HSDPA, also called 3.5G) in the
device settings. See ‘Packet data’, p. 129.
HSDPA is a network service in UMTS networks and it
provides high data download speed. When HSDPA support
in the device is activated and the device is connected to a
UMTS network that supports HSDPA, downloading data
such as messages, e-mail, and browser pages through the
cellular network may be faster.
For availability and subscription to data connection
services, contact your service provider.
HSDPA only affects the download speed; sending data to
the network, such as sending messages and e-mail, is not
affected.
Volume and loudspeaker control
To increase or decrease the
volume level when you have
14
an active call or are listening to a sound, press the volume
key.
The built-in loudspeaker allows you to speak and listen
from a short distance without having to hold the device to
your ear.
Warning: Do not hold the device near your ear when
the loudspeaker is in use, because the volume may be
extremely loud.
To use the loudspeaker during a call, select Options >
Activate loudspeaker.
To turn off the loudspeaker, select Options > Activate
handset.
Multimedia menu
The multimedia menu provides quick access to multimedia
content and predefined applications.
To open the
multimedia menu,
press
, or when
the device is in the
standby mode, open
the media keys under
the 2-way slide.
When the keypad lock is on, calls may be possible to the
official emergency number programmed into your device.
To change the shown shortcuts, select Options > Menu
items. You can delete, add, or rearrange shortcuts to
applications, browser bookmarks, and radio channels
defined in Visual Radio.
Gameplay
You can customise the appearance of the multimedia
menu. To change the images shown in the background,
select Options > Background images and the desired
option. To set zooming and panning on or off, select
Options > Image effects. To set sounds on or off, select
Options > Menu sounds.
Keypad lock (keyguard)
To lock the keys, press
, then
.
To unlock the keys, open the 2-way slide, or press
then
,
Your device is compatible with the N-Gage™ gaming
experience. With N-Gage, you can download and play
high-quality multiplayer games.
Your Nokia N95
To scroll in the multimedia menu, use the scroll key. To
scroll faster, press and hold the key. To open an application,
press .
Your device includes either one of the following
applications:
• Discover N-Gage application—With this preview
application you can get information about the
upcoming N-Gage gameplay experience, try out game
demos, and download and install the full N-Gage
application when it becomes available
• N-Gage application-The full featured application gives
you access to the complete N-Gage experience
replacing the Discover N-Gage application in the menu.
You can find new games, try and buy games, find other
players, and access scores, events, chat, and more.
When the keys are locked, opening the camera lens cover
unlocks the keys.
Press
You can have the keypad lock activated automatically after
a time-out or when the 2-way slide is closed. See
‘Security’, p. 121
For the full N-Gage experience, you need internet access
on your device, either through the cellular network or
wireless LAN. Contact your service provider for more
information on data services.
, and select Games to get started.
For more information, visit www.n-gage.com.
15
Your Nokia N95
Headset
You can connect a
compatible headset or
compatible headphones to
the Nokia AV Connector
(3.5 mm) of your device.
You may need to select
the cable mode.
Do not connect products that create an output signal as
this may cause damage to the device. Do not connect any
voltage source to the Nokia AV Connector.
When connecting any external device or any headset,
other than those approved by Nokia for use with this
device, to the Nokia AV Connector, pay special attention to
volume levels.
Warning: When you use the headset, your ability to
hear outside sounds may be affected. Do not use the
headset where it can endanger your safety.
To use a headset or headphones with a remote control unit,
for example, the Nokia Audio Controller AD-43, connect
the unit to the connector in the device, then connect the
headset or headphones to the unit.
Some headsets do not include a microphone. For phone
calls, use such a headset with a remote control unit or the
microphone of the device.
16
When using certain headset enhancements, for example,
the Nokia Audio Controller AD-43, to adjust the volume
during a call, use the volume key in the device. The Nokia
Audio Controller AD-43 has multimedia volume controls
that are used to adjust the volume only for music or video
playback.
Memory card
Use only compatible microSD cards
approved by Nokia for use with this
device. Nokia uses approved industry
standards for memory cards, but
some brands may not be fully compatible with this device.
Incompatible cards may damage the card and the device
and corrupt data stored on the card.
Keep all memory cards out of the reach of small children.
4 Push the hinge back in, and close
the door. Ensure that the door is
properly closed.
1 Place your finger
in the recess
below the door of
the memory card
slot, and lift the
door. Pull the
door to the right
to reveal the
hinge, and swing
the door to the
side.
2 Insert a compatible
memory card in the
slot. Make sure that
the contact area on
the card is facing up
and towards the slot.
3 Push the card in. You
can hear a click when the card
locks into place.
Eject the memory card
Important: Do not remove the
memory card in the middle of an
operation when the card is being accessed. Removing the
card in the middle of an operation may damage the
memory card as well as the device, and data stored on the
card may be corrupted.
Your Nokia N95
Insert the memory card
1 Before you eject the card, press
2
3
4
5
, and select
Remove memory card. All applications are closed.
When Removing memory card will close all open
applications. Remove anyway? is displayed, select
Yes.
When Remove memory card and press 'OK' is
displayed, open the door of the memory card slot.
Press the memory card to release it from the slot.
Pull out the memory card. If the device is switched on,
select OK.
Memory card tool
Press
, and select Tools > Utilities > Memory.
To back up information from the device memory to a
compatible memory card (if available), select Options >
17
Your Nokia N95
Back up phone memory. The device notifies you if the
memory card does not have enough free space to create a
back-up.
To restore information from the compatible memory card
to the device memory, select Options > Restore from
card.
Memory low—free memory
When a memory card is reformatted, all data on the card
is permanently lost. Some memory cards are supplied
preformatted and others require formatting. Consult your
retailer to find out if you must format the memory card
before you can use it.
Many features of the device use memory to store data. The
device notifies you if the device or the memory card
memory is low.
To format a memory card, select Options > Format
memory card. Select Yes to confirm.
To remove data to free memory, use File mgr. to delete
files you no longer need, or go to the respective
application. For example, you can remove the following:
• Messages in the folders in Messaging and retrieved
e-mail messages from the mailbox
• Saved web pages
• Contact information
• Calendar notes
• Applications shown in App. mgr. that you do not need
• Installation files (.sis) of applications you have installed
to a compatible memory card; first back up the
installation files to a compatible PC
File manager
To browse files and folders in the device memory or on a
compatible memory card (if inserted), press , and select
Tools > File mgr.. The device memory view (
) opens.
Press
to open the memory card view (
), if available.
To mark several files, press and hold
while you press
, , or . To move or copy the files to a folder, select
Options > Move to folder or Copy to folder.
To find a file, select Options > Find and the memory from
which to search. Enter a search text that matches the file
name.
18
To view what types of data you have in the device and how
much memory the different data types consume, select
Options > Memory details. The amount of available free
memory is shown in Free memory.
To free device memory, transfer data to a compatible
memory card (if available) or to a compatible PC.
With Download! (network service) you can discover;
preview; buy; download; and upgrade content, services,
and applications that work with your Nokia N95. Games,
ringing tones, wallpapers, applications, and much more are
easily accessible.
Press
, and select Download!. The items are categorized
under catalogs and folders provided by different service
providers. The available content depends on your service
provider. Some items may be chargeable, but you can
usually preview them free of charge.
Your Nokia N95
Download!
19
Web browser
Web browser
Press
Connection security
, and select Web (network service).
Shortcut: To start Web, press and hold
standby mode.
in the
With Web, you can view hypertext markup language
(HTML) web pages on the internet as originally designed.
You can also browse web pages that are designed
specifically for mobile devices, and use extensible
hypertext markup language (XHTML), or the wireless
markup language (WML).
With Web, you can zoom in and out on a page, use Mini
map and Page overview to navigate on pages, read web
feeds and blogs, bookmark web pages, and download
content, for example.
Check the availability of services, pricing, and fees with
your service provider. Service providers will also give you
instructions on how to use their services.
To use Web, you need an access point to connect to
internet. See ‘Access points’, p. 127.
If the security indicator
is displayed during a
connection, the data transmission between the device and
the internet gateway or server is encrypted.
The security icon does not indicate that the data
transmission between the gateway and the content server
(or place where the requested resource is stored) is secure.
The service provider secures the data transmission
between the gateway and the content server.
Security certificates may be required for some services,
such as banking services. You are notified if the identity of
the server is not authentic or if you do not have the correct
security certificate in your device. For more information,
contact your service provider. See also ‘Certificate
management’, p. 122 for more information on the
certificates and certificate details.
Bookmarks view
The bookmarks view allows you to select web addresses
from a list or from a collection of bookmarks in the Auto.
Bookmarks folder. You can also enter the URL address of
the web page you want to visit directly into the field ( ).
20
You can save URL addresses as bookmarks while browsing
on the internet. You can also save addresses received in
messages to your bookmarks and send saved bookmarks.
Your device may have preinstalled bookmarks and links for
third-party internet sites. You may also access other thirdparty sites through your device. Third-party sites are not
affiliated with Nokia, and Nokia does not endorse or
assume liability for them. If you choose to access such
sites, you should take precautions for security or content.
To open the bookmarks view while browsing, press
select Options > Bookmarks.
, or
To edit the details of a bookmark, such as the title, select
Options > Bookmark manager > Edit.
In the bookmarks view, you can also enter other browser
folders. Web allows you to save web pages during
browsing. In the Saved pages folder, you can view the
content of the pages you have saved offline.
Web also keeps track of the web pages you visit during
browsing. In the Auto. Bookmarks folder, you can view the
list of visited web pages.
In Web Feeds, you can view saved links to web feeds and
blogs to which you have subscribed. Web feeds are
commonly found on major news organisation web pages,
personal weblogs, online communities that offer latest
headlines, and article summaries. Web feeds use RSS and
ATOM technologies.
Browse the web
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
Web browser
indicates the starting page defined for the default
access point.
With Web, you can view web pages as they are originally
designed. To browse a web page, in the bookmarks view,
select a bookmark, or enter the address in the field ( ).
Then press .
Some web pages may contain material, such as graphics
and sounds, that requires a large amount of memory to
view. If your device runs out of memory while loading such
a page, the graphics on the page are not shown. To browse
web pages without graphics to save memory, select
Options > Settings > Page > Load content > Text only.
Tip! To return to the standby mode with the browser
open in the background, press
twice or
. To
return to the browser, press and hold
, and select
the browser from the list.
To open links and make selections, press
.
To enter a new web page address you want to visit, select
Options > Go to web address.
21
Web browser
Tip! To visit a web page saved as bookmark in the
bookmarks view, while browsing, press
, and select
a bookmark.
To retrieve the latest content of the page from the server,
select Options > Navigation options > Reload.
To save the web address of the current page as bookmark,
select Options > Save as bookmark.
To use Visual history to view snapshots of the pages you
have visited during the current browsing session, select
Back (available if History list is set on in the browser
settings). To go to a previously visited page, select the
page.
To save a page while browsing, select Options > Tools >
Save page. You can save pages to the device memory or
compatible memory card (if inserted), and browse them
when offline. You can also group the pages into folders. To
access the pages later, in the bookmarks view, select Saved
pages.
Shortcuts while browsing are as follows:
• Press
to open your bookmarks.
• Press
to search for keywords in the current page.
• Press
to return to the previous page.
• Press
to list all open windows.
• Press
to show the page overview of the current
page. Press
again to zoom in and view the desired
section of the page.
• Press
to enter a new web address.
• Press
to go to the start page.
• Press
or
to zoom the page in or out.
Text search
To search for keywords within the current web page, select
Options > Find > Text, and enter a keyword. To go to the
previous match, press . To go to the next match, press
.
Tip! To search for keywords within the page, press
.
To open a sublist of commands or actions for the currently
open page, select Options > Service options (if supported
by the web page).
Browser toolbar
To allow or prevent the automatic opening of multiple
windows, select Options > Window > Block pop-ups or
Allow pop-ups.
With the toolbar, you can select most frequently used
features in the browser. To open the toolbar, press
on
an empty spot on a web page. To move within the toolbar,
press
or
, To select a feature, press .
In the toolbar, select from the following:
22
•
•
•
•
addresses you visit frequently
Page overview to view the overview of the current web
page
Find to search for keywords within the current page
Reload to refresh the page
Subscribe (if available) to view a list of available web
feeds on the current web page, and subscribe to a web
feed
Download and purchase items
You can download items such as ringing tones, images,
operator logos, themes, and video clips. These items can be
provided free of charge, or you can purchase them.
Downloaded items are handled by the respective
applications in your device, for example, a downloaded
photo or an .mp3 file can be saved in Gallery.
Important: Only install and use applications and
other software from trusted sources, such as applications
that are Symbian Signed or have passed the Java VerifiedTM
testing.
1 To download the item, select the link.
2 Select the appropriate option to purchase the item (for
example, “Buy”).
3 Carefully read all the information provided.
To continue the download, select Accept. To cancel the
download, select Cancel.
When you start a download, a list of ongoing and
completed downloads from the current browsing session is
displayed. To also view the list, select Options >
Downloads. In the list, scroll to an item, and select Options
to cancel ongoing downloads, or open, save, or delete
completed downloads.
Web browser
• Frequently used links to view a list of the web
Mini map
Mini map helps you to navigate on web pages that contain
large amount of information. When Mini map is set on in
the browser settings and you scroll through a large web
page, Mini map opens and shows an overview of the web
page you browse. To scroll in Mini map, press
,
, ,
or . When you find the desired location, stop scrolling,
and Mini map disappears and leaves you at the selected
location.
To set Mini map on, select Options > Settings >
General > Mini map > On.
Page overview
When you are browsing a web page that contains a large
amount of information, you can use Page overview to view
what kind of information the page contains.
23
Web browser
To show the page overview of the current page, press
.
To find the desired spot on the page, press , ,
, or
. Press
again to zoom in and view the desired
section of the page.
End connection
Web feeds and blogs
Pressing
does not end the connection but takes the
browser to the background.
Web feeds are xml files on web pages that are widely used
by the weblog community and news organisations to share
the latest entry headlines or full text, for example, recent
news in the form of news feeds. Blogs or weblogs are web
diaries. Most of the web feeds use RSS and ATOM
technologies. It is common to find web feeds on web, blog,
and wiki pages.
Web automatically detects if a web page contains web
feeds. To subscribe to a web feed, select Options >
Subscribe, or click on the link. To view the web feeds to
which you have subscribed, in the bookmarks view, select
Web feeds.
To update a web feed, select it, and Options > Refresh.
To define how the web feeds are updated, select Options >
Settings > Web feeds. See ‘Settings’, p. 24.
To end the connection and view the browser page offline,
select Options > Tools > Disconnect; or to end the
connection and close the browser, select Options > Exit.
To delete the information the network server collects
about your visits to various web pages, select Options >
Clear privacy data > Delete cookies.
Empty the cache
The information or services you have accessed are stored in
the cache memory of the device.
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have accessed
confidential information requiring passwords, empty the
cache after each use. The information or services you have
accessed are stored in the cache. To empty the cache,
select Options > Clear privacy data > Clear cache.
Settings
Select Options > Settings and from the following:
General settings
24
Homepage—Define the home page.
Mini map—Set Mini map on or off. See ‘Mini map’, p. 23.
History list—While browsing, to use the selection key Back
to see a list of the pages you have visited during the
current browsing session, set History list on.
Security warnings—Hide or show security notifications.
Java/ECMA script—Enable or disable the use of scripts.
Page settings
Load images and sounds—Select whether you want to
load images and other objects while browsing. If you select
No, to load images or objects later during browsing, select
Options > Tools > Load images.
Screen size—Select between Full screen and the normal
view with the options list.
Default encoding—If text characters are not shown
correctly, you can select another encoding according to
language for the current page.
Block pop-ups—Allow or block automatic opening of
different pop-ups while browsing.
Automatic reload—If you want the web pages to be
refreshed automatically while browsing, select On.
Font size—Define the font size that is used for web pages.
Privacy settings
Auto. bookmarks—Enable or disable automatic bookmark
collecting. If you want to continue saving the addresses of
the visited web pages into the Auto. Bookmarks folder,
but hide the folder from the bookmarks view, select Hide
folder.
Web browser
Access point—Change the default access point. See
‘Connection’, p. 126. Some or all access points may be
preset for your device by your service provider; you may
not be able to change, create, edit, or remove them.
Form data saving—If you do not want the data you enter
to different forms on a web page to be saved and used next
time the page is entered, select Off.
Cookies—Enable or disable the receiving and sending of
cookies.
Web feeds settings
Automatic updates—Define whether you want the web
feeds to be updated automatically or not, and how often
you want to update them. Setting the application to
retrieve web feeds automatically may involve the
transmission of large amounts of data through your service
provider's network. Contact your service provider for
information about data transmission charges.
Acc. point for auto-update (only available when
Automatic updates is on)—Select the desired access point
for updating.
25
Connections
Connections
Wireless LAN
Wireless LAN connections
Your device supports wireless local area network (WLAN).
With WLAN, you can connect your device to the internet
and compatible devices that have WLAN. For information
about using your device with other compatible Universal
Plug and Play (UPnP) devices through WLAN, see ‘Home
network’, p. 67.
To use WLAN, you must create an internet access point
(IAP) in a WLAN. Use the access point for applications that
need to connect to the internet. See ‘WLAN internet access
points’, p. 27.
To use WLAN, it must be available in the location and your
device must be connected to the WLAN.
Some places, like France, have restrictions on the use of
WLAN. Check with your local authorities for more
information.
Features using WLAN, or allowing such features to run in
the background while using other features, increase the
demand on battery power and reduce the battery life.
Your device supports the following WLAN features:
• IEEE 802.11b/g standard
• Operation at a frequency of 2.4 GHz
• Wired equivalent privacy (WEP) with keys up to 128
bits, Wi-Fi protected access (WPA), and 802.1x
encryption methods. These functions can be used only
if they are supported by the network.
26
Important: Always enable one of the available
encryption methods to increase the security of your WLAN
connection. Using encryption reduces the risk of
unauthorised access to your data.
A WLAN connection is established when you create a data
connection using a WLAN internet access point. The active
WLAN connection ends when you end the data connection.
To end the connection, see ‘Connection manager’, p. 28.
You can use WLAN during a voice call or when packet data
is active. You can only be connected to one WLAN access
point device at a time, but several applications can use the
same internet access point.
When the device is in the Offline profile, you can still use
WLAN (if available). Remember to comply with any
applicable safety requirements when establishing and
using a WLAN connection.
WLAN wizard
The WLAN wizard helps you to connect to a WLAN and
manage your WLAN connections.
The WLAN wizard shows the status of your WLAN
connections in the active standby mode. To view the
available options, scroll to the row showing the status, and
press .
If the search results of found WLANs, for example, WLAN
network found are displayed, to create an internet access
point and start the web browser using this IAP, select the
status, the option Start web browsing, and the network.
If you select a secured WLAN network, you are asked to
enter the relevant passcodes. To connect to a hidden
network, you must enter the correct network name (service
set identifier, SSID). To create a new access point for
hidden WLAN, select New WLAN.
If you are connected to a WLAN, the IAP name is displayed.
To start the web browser using this IAP, select the status
and the option Cont. Web browsing. To end the
connection in the WLAN, select the status and the option
Disconnect WLAN.
If WLAN scanning is off and you are not connected to any
WLAN, WLAN scanning off is displayed. To set scanning
on and search for available WLANs, select the status and
press .
To start a search for available WLANs, select a status and
the option Search for WLAN. To set WLAN scanning off,
select a status and the option Switch WLAN scan off.
To access the WLAN wizard in the menu, press
select Tools > WLAN wiz.
Connections
Tip! To check the unique media access control (MAC)
address that identifies your device, enter
*#62209526# in the standby mode.
, and
WLAN internet access points
To search for WLANs available within range, press
select Tools > WLAN wiz..
, and
Select Options and select from the following:
• Filter WLAN networks— Filter out WLANs in the list of
found networks. The selected networks are filtered out
the next time the application searches for WLANs.
• Details — View the details of a network shown in the
list. If you select an active connection, the connection
details are displayed.
• Define access point— Create an internet access point
(IAP) in a WLAN.
• Edit access point — Edit the details of an existing IAP.
You can also use Conn. mgr. to create internet access
points. See ‘Wireless LAN’, p. 28.
27
Connections
Operating modes
There are two operating modes in WLAN: infrastructure
and ad hoc.
The infrastructure operating mode allows two kinds of
communication: wireless devices are connected to each
other through a WLAN access point device, or wireless
devices are connected to a wired LAN through a WLAN
access point device.
In the ad hoc operating mode, devices can send and receive
data directly with each other. To create an internet access
point for an ad hoc network, see ‘Access points’, p. 127.
Connection manager
To view the details of a connection, select Options >
Details. The details shown depend on the connection type.
Wireless LAN
To search for WLANs available within range, press
, and
select Tools > Conn. mgr. > Available WLAN networks.
The available WLAN view shows a list of WLANs within
range, their network mode (Infrastructure or Ad-hoc),
and signal strength indicator.
is shown for networks
with encryption, and
if your device has an active
connection in the network.
To view the details of a network, select Options > Details.
Data connections
To create an internet access point in a network, select
Options > Define access point.
Press
, and select Tools > Connectivity > Conn. mgr. >
Active data connections. In the active connections view,
you can see the open data connections: data calls ( ),
packet data connections ( or ), and WLAN
connections ( ).
Bluetooth connectivity
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
28
To end a connection, select Options > Disconnect. To close
all open connections, select Options > Disconnect all.
You can connect wirelessly to other compatible devices
with wireless Bluetooth technology. Compatible devices
may include mobile phones, computers, and enhancements
such as headsets and car kits. You can use Bluetooth
connectivity to send images, video clips, music and sound
clips, and notes; connect wirelessly to your compatible PC
Since devices with Bluetooth wireless technology
communicate using radio waves, your device and the other
device do not need to be in direct line-of-sight. The two
devices only need to be within 10 meters (33 feet) of each
other, but the connection may be subject to interference
from obstructions such as walls or from other electronic
devices.
This device is compliant with Bluetooth Specification 2.0
supporting the following profiles: Advanced Audio
Distribution Profile, Audio/Video Remote Control Profile,
Basic Imaging Profile, Basic Printing Profile, Dial-up
Networking Profile, File Transfer Profile, Hands-Free
Profile, Headset Profile, Human Interface Device Profile,
Object Push Profile, SIM Access profile, and
Synchronisation Profile. To ensure interoperability
between other devices supporting Bluetooth technology,
use Nokia approved enhancements for this model. Check
with the manufacturers of other devices to determine their
compatibility with this device.
There may be restrictions on using Bluetooth technology in
some locations. Check with your local authorities or service
provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
When the device is locked, you cannot use Bluetooth
connectivity. See ‘Phone and SIM card’, p. 121 for more
information on locking the device.
Connections
(for example, to transfer files); connect to a compatible
printer to print images with Image print. See ‘Image print’,
p. 65.
Settings
Press
, and select Tools > Bluetooth. When you open
the application for the first time, you are asked to define a
name for your device.
Select from the following:
Bluetooth—To connect wirelessly to another compatible
device, first set Bluetooth connectivity On, then establish
a connection. To switch off Bluetooth connectivity, select
Off.
My phone's visibility—To allow your device to be found by
other devices with Bluetooth wireless technology, select
Shown to all. To set a time after which the visibility is set
from shown to hidden, select Define period. To hide your
device from other devices, select Hidden.
My phone's name—Edit the name shown to other devices
using Bluetooth wireless technology.
29
Connections
Remote SIM mode—To enable another device, such as a
compatible car kit enhancement, to use the SIM card in
your device to connect to the network, select On. For more
information, see ‘Remote SIM mode’, p. 31.
2
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone's visibility > Hidden. In this
way, you can better control who can find your device with
Bluetooth wireless technology, and connect to it.
3
4
Do not pair with or accept connection requests from an
unknown device. In this way, you can better protect your
device from harmful content.
5
Send data using Bluetooth connectivity
Several Bluetooth connections can be active at a time. For
example, if you are connected to a compatible headset,
you can also transfer files to another compatible device at
the same time.
For Bluetooth connectivity indicators, see ‘Essential
indicators’, p. 28.
Tip! To send text using Bluetooth connectivity, open
Notes, write the text, and select Options > Send > Via
Bluetooth.
30
1 Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
Select the item and Options > Send > Via Bluetooth.
Devices with Bluetooth wireless technology within
range start to appear on the display.
Device icons:
computer, phone,
audio or
video device, and
other device.
To interrupt the search, select Stop.
Select the device with which you want to connect.
If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See ‘Pair devices’, p. 30.
When the connection has been established, Sending
data is shown.
Tip! When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820# in the standby mode.
Pair devices
To pair with compatible devices and view your paired
devices, in the Bluetooth application main view, press
.
Before pairing, create your own passcode (1-16 digits), and
agree with the owner of the other device to use the same
code. Devices that do not have a user interface have a
factory-set passcode. The passcode is used only once.
device. Devices with Bluetooth wireless technology
within range start to appear on the display.
2 Select the device, and enter the passcode. The same
passcode must be entered on the other device as well.
Some audio enhancements connect automatically to your
device after pairing. Otherwise, scroll to the enhancement,
and select Options > Connect to audio device.
Paired devices are indicated by
in the device search.
To set a device as authorised or unauthorised, scroll to a
device, and select from the following options:
Set as authorised—Connections between your device and
this device can be made without your knowledge. No
separate acceptance or authorisation is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you trust.
indicates authorised devices in the paired devices view.
Set as unauthorised—Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings, select
Options > Delete all.
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
is shown, and the item is
placed in the Inbox folder in Messaging. Messages
received through Bluetooth connectivity are indicated by
. See ‘Inbox—receive messages’, p. 90.
Connections
1 To pair with a device, select Options > New paired
Remote SIM mode
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. See
‘Settings’, p. 29. Before the mode can be activated, the two
devices must be paired and the pairing initiated from the
other device. When pairing, use a 16-digit passcode, and
set the other device as authorised. See ‘Pair devices’, p. 30.
Activate the remote SIM mode from the other device.
When remote SIM mode is on in your device, Remote SIM
is displayed in the standby mode. The connection to the
wireless network is turned off, as indicated by
in the
signal strength indicator area, and you cannot use SIM
card services or features requiring cellular network
coverage.
31
Connections
32
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls, except to the emergency numbers
programmed into your device, while in this mode. To make
calls from your device, you must first leave the remote SIM
mode. If the device has been locked, enter the lock code to
unlock it first.
2 The user of the receiving device activates the infrared
To leave the remote SIM mode, press the power key, and
select Exit remote SIM mode.
port.
To activate the infrared port of your device to receive
data through infrared, press
, and select Tools >
Connectivity > Infrared.
3 The user of the sending device selects the desired
infrared function to start the data transfer.
To send data through infrared, locate the desired file in
an application or the file manager, and select
Options > Send > Via infrared.
Infrared connection
If data transfer is not started within 1 minute after the
activation of the infrared port, the connection is cancelled
and must be started again.
With infrared, you can transfer data such as business
cards, calendar notes, and media files with a compatible
device.
Items received through infrared are placed in the Inbox
folder in Messaging. New infrared messages are indicated
by
.
Do not point the infrared (IR) beam at anyone's eye or
allow it to interfere with other IR devices. This device is a
Class 1 laser product.
For infrared connection indicators, see ‘Essential
indicators’, p. 28.
Send and receive data using infrared
1 Make sure that the infrared ports of the sending and
receiving devices are pointing at each other, and that
there are no obstructions between the devices. The
preferable distance between the two devices is up to 1
meter (3 feet).
USB
Press
, and select Tools > Connectivity > USB.
To have the device ask the purpose of the USB cable
connection each time the cable is connected, select Ask on
connection > Yes.
Media player—to synchronise music with Windows Media
Player. See ‘Music transfer with Windows Media Player’, p.
38.
PC Suite—to use Nokia PC applications such as Nokia
Nseries PC Suite, Nokia Lifeblog, and Nokia Software
Updater
Data transfer— to transfer data between your device and
a compatible PC
Image print—to print images on a compatible printer. See
‘Image print’, p. 65.
PC connections
You can use your device with a variety of compatible PC
connectivity and data communications applications. With
Nokia Nseries PC Suite you can, for example, transfer
images between your device and a compatible PC.
Always create the connection from the PC to synchronise
with your device.
Synchronisation
Sync enables you to synchronise your notes, calendar, text
messages, or contacts with various compatible
applications on a compatible computer or on the internet.
You may receive synchronisation settings in a special
message. See ‘Data and settings’, p. 91.
Connections
If Ask on connection is set to off or you want to change
the mode during an active connection, select USB mode
and from the following:
In the Sync main view, you can see the different
synchronisation profiles. A synchronisation profile
contains the necessary settings to synchronise data in your
device with a remote database on a server or compatible
device.
1 Press
, and select Tools > Sync.
2 Select a synchronisation profile and Options >
Synchronise. To cancel synchronisation before it
finishes, select Cancel.
Device manager
To connect to a server and receive configuration settings
for your device, to create new server profiles, or to view
and manage existing server profiles, press
, and select
Tools > Utilities > Device mgr..
You may receive server profiles and different configuration
settings from your service providers and company
information management department. These configuration
33
Connections
settings may include connection and other settings used
by different applications in your device.
Scroll to a server profile, and select Options and from the
following:
Start configuration—to connect to the server and receive
configuration settings for your device
New server profile—to create a server profile
To delete a server profile, scroll to it, and press
.
Modem
Press
, and select Tools > Connectivity > Modem. To
connect your device to a compatible PC through infrared
to use it as a modem, press . For how to connect the
devices, see ‘Infrared connection’, p. 32
34
Music player
Music player supports files formats such as AAC, AAC+,
eAAC+, MP3, and WMA. Music player does not necessarily
support all features of a file format or all the variations of
file formats.
You can also use Music player to listen to podcast
episodes. Podcasting is the method for delivering audio or
video content over the internet using either RSS or ATOM
technologies for playback on mobile devices and PCs.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
For how to add songs to your device, see ‘Transfer music’,
p. 37.
For more information about copyright protection, see
‘Digital rights management’, p. 117.
To refresh the library after you have updated the song
selection in your device, in the Music player main view,
select Options > Refresh.
Play a song
Tip! To open the music player, press and hold
. You
can also open the player from the multimedia menu.
See ‘Multimedia menu’, p. 14
1 Press
, and select Music > Music player.
2 Open the media keys under
Media applications
Media applications
the 2-way slide.
3 Select a song, artist, or
other category.
4 To play the selected song or
list of songs, press
.
To pause playback,
press
, and to
resume, press
again. To stop
playback, press
.
To fast forward or
rewind, press and
hold
or
.
To go to the next
song, press
. To return to the beginning of the song,
35
Media applications
press
. To skip to the previous song, press
within 2 seconds after a song has started.
again
You can also use the scroll key to control the player.
To switch random play (
Shuffle.
) on or off, select Options >
To repeat the current song (
), all songs (
switch repeat off, select Options > Repeat.
), or to
To adjust the volume, use the volume key.
To modify the tone of the music playback, select Options >
Equaliser.
To modify the balance, loudness, and stereo image, or to
enhance bass, select Options > Audio settings.
To view a visualization during playback, select Options >
Start visualisation.
To return to the standby mode and leave the player playing
in the background, press
, or to switch to another open
application, press and hold
.
Music menu
To select more music to play in Now playing view, select
Options > Go to Music menu.
The music menu shows the music available in the device
and compatible memory card (if inserted). All songs lists
36
all music. To view sorted songs, select Albums, Artists,
Genres, or Composers. To view playlists, select Playlists.
To open the view that displays the currently playing song,
press and hold
.
Playlists
To view and manage playlists, in the music menu, select
Playlists. The following playlists appear automatically:
Most played tracks, Recently played songs, and Recent
additions.
To view details of the playlist, select Options > Playlist
details.
Create a playlist
1 Select Options > Create playlist.
2 Enter a name for the playlist, and select OK.
3 Select artists to find the songs you want to include in
the playlist. Press to add items. To show the song list
under an artist title, press
. To hide the song list,
press
.
4 When you have made your selections, select Done. If a
compatible memory card is inserted, the playlist is
saved to the memory card.
To add more songs later, when viewing the playlist, select
Options > Add songs.
To remove a song from a playlist, select Options > Remove
from playlist. This deletion does not delete the song from
the device; it only removes it from the playlist.
To reorder songs in a playlist, scroll to the song you want
to move, and select Options > Reorder list. To grab songs
and drop them to a new position, use the scroll key.
Nokia Music Store
In the Nokia Music Store (network service) you can search,
browse, and purchase music to download to your device. To
purchase music, you first need to register for the service.
To check the Nokia Music Store availability in your country,
visit music.nokia.com.
To access the Nokia Music Store, you must have a valid
internet access point in the device. For more details, see
‘Access points’, p. 127.
To open the Nokia Music Store, press
, and select
Music > Music store. In the main page, select Help for
further instructions.
Tip! To find more music in different categories of the
music menu, select Options > Go to Music store in the
music player.
Music store settings
You may be asked to enter the following settings:
Default acc. pt.—Select the access point to use when
connecting to the music store.
Media applications
To add songs, albums, artists, genres, and composers to a
playlist from the different views of the music menu, select
an item and Options > Add to a playlist > Saved playlist
or New playlist.
In the music store, you may be able to edit the settings by
selecting Options > Settings.
You can also access the Nokia Music Store from your
compatible PC at music.nokia.com. In the main page, select
Help for further instructions.
Transfer music
You can transfer music from a compatible PC or other
compatible devices using a compatible USB cable or
Bluetooth connectivity. For details, see ‘Bluetooth
connectivity’, p. 28.
To refresh the library after you have updated the song
selection in your device, in the Music menu, select
Options > Refresh Music library
The requirements of the PC for music transfer:
• Microsoft Windows XP operating system (or later)
37
Media applications
• A compatible version of Windows Media Player
application. You can get more detailed information
about Windows Media Player compatibility from the
Nokia N95 section of the Nokia website.
• Nokia Nseries PC Suite version no. 1.6 or later
Transfer music from PC
You can use three different methods to transfer music:
• To view your device on PC as an external hard drive
where you can transfer any data files, make the
connection with a compatible USB cable or Bluetooth
connectivity. If you are using the USB cable, select
Data transfer as the connection mode. A compatible
memory card needs to be inserted in the device.
• To synchronise music with Windows Media Player,
connect the compatible USB cable and select Media
player as the connection mode. A compatible memory
card needs to be inserted in the device.
• To use Nokia Music Manager in Nokia Nseries PC Suite,
connect the compatible USB cable and select PC Suite
as the connection mode.
To change the default USB connection mode, press
select Tools > Connectivity > USB > USB mode.
,
Both Windows Media Player and Nokia Music Manager in
Nokia Nseries PC Suite have been optimized for
transferring music files. For information about transferring
38
music with Nokia Music Manager, see the Nokia Nseries PC
Suite user guide.
Music transfer with Windows Media Player
The functionality of the music synchronisation may vary
between different versions of the Windows Media Player
application. For more information, see the corresponding
Windows Media Player guides and helps.
Manual synchronisation
With manual synchronisation, you can select the songs
and playlists that you want to move, copy, or remove.
1. After your device is connected with Windows Media
Player, select your device in the navigation pane on the
right, if more than one device is connected.
2. In the left navigation pane, browse the music files on
your PC which you want to synchronise.
3. Drag and drop songs to the Sync List on the right.
You can see the amount of available memory in your
device above the Sync List.
4. To remove songs or albums, select an item in the Sync
List, right-click, and select Remove from list.
5. To start the synchronisation, click Start Sync.
Radio
1. To activate the automatic synchronisation function in
Press
Windows Media Player, click the Sync tab, select Nokia
Handset > Set Up Sync..., and check the Sync this
device automatically check box.
2. Select the playlists you want to synchronise
automatically in the Available playlists pane, and click
Add.
The selected items are transferred to the Playlists to
sync pane.
3. To finalise the setup for automatic synchronisation,
click Finish.
If the Sync this device automatically check box is
selected and you connect your device, the music library in
your device is automatically updated based on playlists you
have selected in Windows Media Player. If no playlists have
been selected, the whole PC music library is selected for
synchronisation. If there is not enough free memory in your
device, Windows Media Player selects manual
synchronisation automatically.
To stop automatic synchronisation, click the Sync tab, and
select Stop Sync to 'Nokia Handset'.
, and select Music > Radio.
When you open Visual Radio for the first time, a wizard
helps you to save local stations.
You can use the application as a traditional FM radio with
automatic tuning and saved stations, or with parallel
visual information related to the radio program on the
display, if you tune to stations that offer Visual Radio
service. The Visual Radio service uses packet data (network
service). You can listen to the FM radio while using other
applications.
Media applications
Automatic synchronisation
You can see the latest list of all the stations that offer
Visual Radio service at http://www.visualradio.com.
If you do not have access to the Visual Radio service, the
operators and radio stations in your area may not support
Visual Radio.
To check availability and costs, and to subscribe to the
service, contact your service provider.
You can normally make a call or answer an incoming call
while listening to the radio. The radio is muted when there
is an active call.
39
Media applications
Listen to the radio
Note that the quality of the radio broadcast depends on
the coverage of the radio station in that particular area.
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for the
FM radio to function properly.
Press
, and select Music > Radio. To start a station
search, select
or
, or press and hold the media
keys
or
. To change the frequency manually,
select Options > Manual tuning.
If you have previously saved radio stations, to go to the
next or previous saved station, select
or
, or press
the media keys
or
.
To save the current tuned station to your station list, select
Options > Save station. To open the list of your saved
stations, select Options > Stations.
To return to the standby mode and leave the FM radio
playing in the background, select Options > Play in
background.
View visual content
To view available visual content for a tuned station, select
or Options > Start visual service. If the visual service
ID has not been saved for the station, enter it, or select
Retrieve to search for it in the station directory (network
service).
When the connection to the visual service is established,
the display shows the current visual content.
To adjust the volume, press the volume keys.
To listen to the radio using the loudspeaker, select
Options > Activate loudspeaker.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
To view available stations based on location, select
Options > Station directory (network service).
40
Saved stations
To open the list of your saved stations, select Options >
Stations.
To listen to a saved station, select Options > Station >
Listen. To view available visual content for a station with
Visual Radio service, select Options > Station > Start
visual service.
To change station details, select Options > Station > Edit.
Settings
Select Options > Settings and from the following:
Before using Nokia Podcasting, set your connection and
download settings.
Start-up tone—Select whether a tone is played when the
application is started.
Auto-start service—Select Yes to have the Visual Radio
service start automatically when you select a saved station
that offers Visual Radio service.
Access point—Select the access point used for the Visual
Radio data connection. You do not need an access point to
use the application as an ordinary FM radio.
Current region—Select the region you are currently
located in. This setting is displayed only if there was no
network coverage when the application was started.
The recommended connection method is wireless LAN
(WLAN). Check with your service provider for terms and
data service fees before using other connections. For
example, a flat rate data plan can allow large data
transfers for one monthly fee.
Media applications
Settings
To search for wireless LANs available within range, press
and select Tools > Connectivity > Conn. mgr. >
Available WLAN networks.
To create an internet access point in a network, select
Options > Define access point.
Connection settings
Nokia Podcasting
With the Nokia Podcasting application, you can search,
discover, subscribe to, and download podcasts over the air,
and play, manage, and share audio and video podcasts
with your device.
To open Nokia Podcasting, press
Podcasting.
, and select Music >
To edit the connection settings, press
and select
Music > Podcasting > Options > Settings > Connection.
Define the following:
Default access point—Select the access point to define
your connection to the internet.
Search service URL—Define the podcast search service to
be used in Search.
41
Media applications
Download settings
To edit the download settings, press
, and select
Music > Podcasting > Options > Settings > Download.
Define the following:
Save to—Define the location where you want to save your
podcasts. For optimal use of storage space, mass memory
is recommended.
Update interval—Define how often podcasts are updated.
To restore the default settings, select Options > Restore
default in the Settings view.
Search
Search helps you to find podcasts by keyword or title.
Next update date—Define the date of the next automatic
update.
The search engine uses the podcast search service you set
up in Podcasting > Options > Settings > Connection >
Search service URL.
Next update time—Define the time of next automatic
update.
To search for podcasts, press
,select Music >
Podcasting > Search, and enter the desired keywords.
Automatic updates only occur if a specific default access
point is selected and Nokia Podcasting is running. If
Nokia Podcasting is not running, the automatic updates
are not activated.
Tip! Search looks for podcast titles and keywords in
descriptions, not specific episodes. General topics, such
as football or hip-hop, usually give better results than
a specific team or artist.
Download limit (%)—Define the size of the memory that
is used for podcast downloads.
To subscribe to a marked channel or channels and add it to
your Podcasts, select Subscribe. You can also add a
podcast to your Podcasts by selecting one.
If limit exceeds—Define what to do if the downloads
exceed the download limit.
Setting the application to retrieve podcasts automatically
may involve the transmission of large amounts of data
through your service provider’s network. Contact your
42
service provider for information about data transmission
charges.
To start a new search, select Options > New search.
To go the website of the podcast select Options > Open
web page (network service).
To see the details of a podcast, select Options >
Description.
To edit the selected folder, web link, or web directory,
select Options > Edit.
The available options may vary.
To import an .opml file stored on your device, select
Options > Import OPML file. Select the location of the
file, and import it.
Directories
Directories help you to find new podcast episodes to which
to subscribe.
To open Directories, press
Podcasting > Directories.
, and select Music >
Contents of the Directories change. Select the desired
directory folder to update it (network service). When the
color of the folder changes, press the scroll key again to
open it.
Directories can include top podcasts listed by popularity or
themed folders.
To open the desired folder topic, press the scroll key. A list
of podcasts is displayed.
To subscribe to a podcast, select the title, and press the
scroll key. After you have subscribed to episodes of a
podcast, you can download, manage, and play them in
Podcasts.
To add a new directory or folder, select Options > New >
Web directory or Folder. Enter a title, URL of the .opml
(Outline Processor Markup Language), and select Done.
To send a directory folder as a multimedia message or by
Bluetooth connectivity, select the folder and Options >
Send.
When you receive a message with an .opml file sent by
Bluetooth connectivity, open the file to save the file into
Received in Directories. Open Received to subscribe to
any of the links to add to your Podcasts.
Media applications
To send a selected podcast or podcasts to another
compatible device, select Options > Send.
Download
After you have subscribed to a podcast, from Directories,
Search, or by entering a URL, you can manage, download,
and play episodes in Podcasts.
To see the podcasts you have subscribed to, select
Podcasting > Podcasts. To see individual episode titles (an
episode is a particular media file of a podcast), select the
podcast title.
To start a download, select the episode title. To download,
or continue downloading selected or marked episodes,
select Options > Download or Continue download. You
can download multiple episodes at the same time.
43
Media applications
To play a portion of a podcast during download or after
partial downloading, select Podcasts > Options > Play
preview.
If you do not have an access point defined or if during
packet data connection you are asked to enter a user name
and password, contact your service provider.
Fully downloaded podcasts can be found in Podcasts
folder, but will not be shown until the music library is
refreshed.
To edit the URL of the selected podcast, select Options >
Edit.
The available options may vary.
Play and manage podcasts
To display the available episodes from the selected
podcast, select Options > Open. Under each episode, you
will see the file format, the size of the file, and time of the
upload.
When the podcast is fully downloaded, to play the full
episode, select Podcasts > Options > Play, or press
and select Music > Music player > Podcasts.
To update the selected podcast, or marked podcasts, for a
new episode, select Options > Update.
To stop the updating of the selected podcast or marked
podcasts, select Options > Stop update.
To add a new podcast by entering the URL of the podcast,
select Options > New podcast.
44
To delete a downloaded podcast or marked podcasts from
your device, select Options > Delete.
To send the selected podcast or marked podcasts to
another compatible device as .opml files as a multimedia
message or by Bluetooth connectivity, select Options >
Send.
To update, delete, and send a group of selected podcasts at
once, select Options > Mark/Unmark mark the desired
podcasts, and select Options to choose the desired action.
To open the website of the podcast (network service),
select Options > Open web page.
Some podcasts provide the opportunity to interact with
the creators by commenting and voting. To connect to the
internet to do this, select Options > View comments.
Video centre
With Video centre (network service), you can download
and stream video clips over the air from compatible
internet video services using packet data or wireless LAN.
Video centre supports the same file formats as RealPlayer.
See ‘RealPlayer’, p. 47.
Your device may have predefined services. To connect to
the internet to browse available services that you can add
to Video centre, select Add new services.
Service providers may provide free content or charge a fee.
Check the pricing in the service or from the service
provider.
Find and view videos
1 Press
, and select Video centre.
2 To connect to a service, select the desired video service.
3 The device updates and displays the content available
in the service. To view videos by categories (if
available), press
and
to scroll the other tabs.
4 To view information about a video, select Options >
Video details.
Some clips can be streamed over the air, but others
must be first downloaded to your device. To download,
select Options > Download.
To stream a clip or view a downloaded clip, select
Options > Play.
5 When the clip is playing, use the media keys to control
the player. To adjust the volume, use the volume key. To
view the video in full screen, pause or stop the video,
and select Options > Resume in full screen or Play in
full screen.
Downloads continue in the background if you exit the
application. The downloaded videos are saved in Video
Centre > My videos.
To connect to the internet to browse available services that
you can add to the main view, select Add new services.
Media applications
You can also transfer video clips from a compatible PC to
your device, and view them in Video centre.
Internet videos
Internet videos are video clips distributed in the internet
using RSS-based feeds. You can add new feeds to Internet
videos in the settings. See ‘Settings’, p. 46.
1 In Video centre, select the Internet videos folder. Your
feeds are displayed.
To add or delete feeds, select Options > Feed
subscriptions.
2 To view the videos available in a feed, scroll to it, and
press . To view information about a video, select
Options > Video details.
3 To download a video, scroll to it, and select Options >
Download. To play the downloaded video, press
.
45
Media applications
Play downloaded videos
Settings
The downloaded and downloading videos are saved in
Video centre > My videos. To play a downloaded video,
press
.
Define the services
1 In Video centre, select Options > Settings > Video
service selection.
2 To select video services, select Video on demand. To
add or delete internet video feeds, select Internet
videos.
3 Select the services you want to appear in the
application.
To add a new internet video feed that is not displayed
in the list, select Options > Add feed. Enter the name
and address of the service received from the service
provider.
Some services require a user name and a password that
you receive from the service provider.
You can also transfer video clips from a compatible PC to
your device, and view them in Video centre > My videos.
In order for the video clips to be available in Video centre,
you must save them in the location C:\Data\My Videos in
the device memory (C:\) or E:\My Videos in a compatible
memory card (E:\). Use, for example, File manager available
in Nokia Nseries PC Suite to transfer files to the correct
location.
When the clip is playing, use the media keys to control the
player. To adjust the volume, use the volume key. To view
the video in full screen, pause or stop the video, and select
Options > Resume in full screen or Play in full screen.
If there is not enough free space in the device memory and
compatible memory card, the application automatically
deletes some of the oldest watched videos when new
videos are downloaded.
indicates videos that may soon
be deleted. To prevent a video from being automatically
deleted ( ), select Options > Protect.
To delete a video, select Options > Delete. To cancel an
ongoing download, select Options > Cancel download. To
change the folder or memory location of a video, select
Options > Organise and the desired option.
46
To define the other settings, select Options > Settings and
from the following:
Default access points—Select the access points used for
the data connection. Using packet data access points to
download files may involve transmission of large amounts
of data through your service provider's network. Contact
your service provider for information about data
transmission charges.
Preferred memory—Select whether downloaded videos
are saved in the device memory or a compatible memory
card. If the selected memory becomes full, the device saves
Thumbnails—Select whether to view thumbnail images in
the video lists of video services.
RealPlayer
Press
, and select Applications >Media > RealPlayer.
With RealPlayer, you can play video clips, or stream media
files over the air without saving them to the device first.
RealPlayer supports files with extensions such as .3gp,
.mp4 or .rm. However, RealPlayer does not necessarily
support all file formats or all the variations of file formats.
In landscape view, use the media keys to control the player.
Play video clips
1 To play a saved media file, select Options > Open and
from the following:
Most recent clips—to play one of the last six files
played in RealPlayer
Saved clip—to play a file saved in Gallery.
2 Scroll to a file, and press
to play the file.
To adjust the volume, use the volume key.
Stream content over the air
Many service providers require you to use an internet
access point (IAP) for your default access point. Other
service providers allow you to use a WAP access point.
In RealPlayer, you can only open an rtsp:// URL address.
However, RealPlayer recognises an http link to a .ram file.
To stream content over the air, select a streaming link
saved in Gallery, on a web page, or received in a text
message or multimedia message. Before live content
begins streaming, your device connects to the site and
starts loading the content. The content is not saved in your
device.
Media applications
the content in the other memory, if available. If there is not
enough space in the other memory, the application
automatically deletes some of the oldest watched videos.
RealPlayer settings
You may receive RealPlayer settings in a special message
from the service provider. See ‘Data and settings’, p. 91. For
more information, contact your service provider.
Select Options > Settings and from the following:
Video—to adjust the contrast of the video or have
RealPlayer automatically repeat video clips after they
finish playing
Streaming—to select whether to use a proxy server,
change the default access point, and set the port range
47
Media applications
used when connecting. Contact your service provider for
the correct settings.
Adobe
To view, play, and interact with compatible flash files made
for mobile devices, press
, and select Applications >
Media > Flash Player. Scroll to a flash file, and press .
Nokia Lifeblog
To start Lifeblog on your device, press
Applications > Media > Lifeblog.
Before you install Nokia Lifeblog on a compatible PC, you
need the following:
• 1 GHz Intel Pentium or equivalent, 128 MB RAM
• 400 MB of available hard disk space (if Microsoft
DirectX and Nokia Nseries PC Suite must be installed)
• Graphics capability of 1024x768 and 24-bit color
• 32 MB graphics card
• Microsoft Windows 2000 or Windows XP
To install Nokia Lifeblog on your PC:
, and select
Nokia Lifeblog is a combination of software for mobile
phone and PC that keeps a multimedia diary of the items
that you collect with your device. Nokia Lifeblog
automatically keeps track of your multimedia items and
organises your photos, videos, sounds, text messages,
multimedia messages, and weblog posts into a chronology
that you can browse, search, share, publish, and back up.
For more information on weblog services and their
compatibility with Nokia Lifeblog, visit www.nokia.com/
lifeblog, or press F1 in the Nokia Lifeblog PC application to
open Nokia Lifeblog Help.
48
Installation on your PC
1 Insert the CD-ROM or DVD-ROM supplied with your
device.
2 Install Nokia Nseries PC Suite (includes Nokia
Connectivity Cable drivers for USB connection).
3 Install Nokia Lifeblog for PC.
If Microsoft DirectX 9.0 is not already installed on your PC,
it is installed at the same time with Nokia Lifeblog for PC.
Connect your device and your PC
To connect your device and a compatible PC using a USB
data cable:
1 Ensure that you have installed Nokia Nseries PC Suite.
2 Connect the USB data cable to the device and the PC.
The USB mode should be PC Suite, see ‘USB’, p. 32.
When you connect your device to the PC for the first
To connect your device and a compatible PC using
Bluetooth wireless technology:
1 Ensure that you have installed Nokia Nseries PC Suite
on your PC.
2 Ensure that you have paired your device and the PC
through Bluetooth wireless technology with Get
Connected in Nokia Nseries PC Suite.
3 Activate Bluetooth connectivity on your device and on
your PC. For details, see ‘Bluetooth connectivity’, p. 28
and the documentation for your PC.
Copy items
To copy new or edited items from your device to your PC,
and copy the selected items from your PC to your device:
1 Connect your device to the PC.
2 Start the Nokia Lifeblog application on your PC.
3 In the Nokia Lifeblog PC application, select File > Copy
from Phone and to Phone.
The new items from your device are copied to your PC.
The items on the To Phone view on your PC are copied
to your device.
Browse Timeline and Favorites
When you start Nokia Lifeblog on your device, the Timeline
view opens and shows your multimedia items. To open your
saved favorites, select Options > View favourites.
When you start Nokia Lifeblog on your PC, you have several
ways to move around in the Timeline and Favourites
views. The fastest way is to grab the slider handle and
move it forward or backward, fast or slow. Alternatively,
click the time bar to select a date, use the Go to date
feature, or use the arrow keys.
Media applications
time after you have installed Nokia Nseries PC Suite,
the PC installs the specific driver for your device. This
may take a while.
3 Start the Nokia Lifeblog PC application.
Post to the web
To share your best Nokia Lifeblog items, send them to your
weblog on the internet for others to see.
You must first create an account with a weblog service,
create one or more weblogs that you use as the destination
of your posts, and add the weblog account to Nokia
Lifeblog. The recommended weblog service for Nokia
Lifeblog is TypePad from Six Apart, www.typepad.com.
On your device, to add the weblog account in Nokia
Lifeblog, select Options > Settings > Blog. On your PC,
edit accounts in the Blog account manager window.
To post items to the web from your device:
1 In Timeline or Favourites, select the items that you
want to post to the web.
49
Media applications
2 Select Options > Post to Web.
3 If you use the feature for the first time, Nokia Lifeblog
retrieves a weblog list from the weblog server.
4 The weblog post dialog opens. Select the weblog you
want to use from the Post to: list. If you have created
new weblogs, to update the weblog list, select
Options > Refresh blog list.
5 Enter a title and a caption for the post. You can also
write a longer story or description in the body text field.
6 When everything is ready, select Options > Send.
To post items to the web from your PC:
1 In the timeline of favorites, select the items (a
maximum of 50) that you want to post to the web.
2 Select File > Post to the Web....
3 Enter a title and a caption for the post. You can also
write a longer story or description in the body text field.
4 Select the weblog that you want to use from the Post
to: list.
5 When everything is ready, click the Send button.
Import items from other sources
In addition to the .jpeg images of your device, you can also
import .jpeg images and .3gp and .mp4 video clips, .amr
sound files, and .txt text files from other sources (such as
a CD, DVD, or folders on your hard disk) into Nokia Lifeblog.
50
To import images or videos from a compatible PC to Nokia
Lifeblog for PC, in the timeline or favorites, select File >
Import from PC....
Your Nokia N95 has two cameras, a high resolution camera
on the back of the device (the main camera in landscape
mode) and a lower resolution camera on the front (the
secondary camera in portrait mode). You can use both
cameras to take still pictures and record videos.
Your device supports an image capture resolution of
2592x1944 pixels using the main camera. The image
resolution in this guide may appear different.
The images and video clips are automatically saved in the
Images & vids. folder in Gallery. The cameras produce
.jpeg images. Video clips are recorded in the MPEG-4 file
format with the .mp4 file extension, or in the 3GPP file
format with the .3gp file extension (sharing quality). See
‘Video settings’, p. 58.
Tip! To enter Gallery and view the pictures you have
taken, press the review key
on the side of your
device twice.
You can send images and video clips in a multimedia
message, as an e-mail attachment, or by using Bluetooth
connectivity, infrared, or wireless LAN connection. You can
also upload them to a compatible online album. See ‘Share
online’, p. 67.
Take pictures
Camera
Camera
When taking a picture, note the following:
• Use both hands to keep the camera still.
• The quality of a digitally zoomed picture is lower than
that of a nonzoomed picture.
• The camera goes into the battery saving mode if there
are no keypresses for a moment. To continue taking
pictures, press
.
To take a picture, do the following:
1 To activate the main
camera, open the lens cover
by using the camera
activation switch. If the
camera is in Video mode,
select Image mode from
the active toolbar.
2 To lock the focus on an
object, press the capture
key halfway down (main
camera only, not available in close-up and landscape
scenes). The green locked focus indicator appears on
the display. If the focus was not locked, the red focus
indicator appears. Release the capture key, and press it
51
Camera
halfway down again. You can, however, take the
picture without locking the focus.
3 To take a picture, in the main camera, press the capture
key. Do not move the device before the image is saved.
To close the main camera, close the lens cover.
resolution
indicator
indicates
whether the
quality of the
image is Print
5M - Large,
Print 3M Medium,
Print 2M Medium, E-mail 0.8M - Med., or MMS 0.3M - Small.
5 The image counter displays the estimated number of
images you can capture using the current image quality
setting and memory in use (the counter is not displayed
during focus and image capture).
6 The device memory ( ) and memory card ( )
indicators show where images are saved.
Still image camera indicators
Active toolbar
The still image camera viewfinder displays the following:
1 The current capture mode indicator.
2 The active toolbar, which you can scroll through before
capturing the image to select different items and
settings (the active toolbar is not displayed during
focus and image capture). See ‘Active toolbar’, p. 52.
3 Battery charge level indicator.
Active toolbar provides you with shortcuts to different
items and settings before and after taking a picture or
recording a video. Scroll to items, and select them by
pressing the scroll key. You can also define when the active
toolbar is visible on the display.
To zoom in or out, use the zoom key in your device.
To make lighting and color adjustments before taking a
picture, use the scroll key to scroll through the active
toolbar. See ‘Setup settings—adjust color and lighting’,
p. 55. Saving the captured image may take longer if you
change the zoom, lighting, or color settings.
To activate the front camera, select Options > Use
secondary camera.
To leave the camera open in the background, and use other
applications, press
. To return to the camera, press the
capture key.
52
4 The image
If you want the active toolbar to be visible before and after
taking a picture or recording a video, select Options >
Before taking a picture or recording a video, in the active
toolbar, select from the following:
The icons change to reflect the current status of the
setting.
The available options vary depending on the capture mode
and view you are in.
Camera
Show icons. To view the active toolbar only when you need
it, select Options > Hide icons. Only the capture mode
indicator is shown on the display. To activate the active
toolbar, press the scroll key. To hide it again, press the
capture key half way down.
See also active toolbar options in ‘After taking a picture’,
p. 53, ‘After recording a video’, p. 58, and ‘Active toolbar’,
p. 61 in Gallery.
to switch between the video and image modes
to select the scene
to select the flash mode (images only)
to activate the self-timer (images only). See ‘You in the
picture—self-timer’, p. 56.
to activate the sequence mode (images only). See ‘Take
pictures in a sequence’, p. 56.
to select a color effect
to show or hide the viewfinder grid (images only)
to adjust white balance
to adjust the exposure compensation (images only)
to adjust light sensitivity (images only)
to adjust contrast (images only)
to adjust sharpness (images only)
After taking a picture
After you take the picture, select the following from the
active toolbar (available only if Show captured image is
set to Yes in still image camera settings):
• If you do not want to keep the image, select Delete.
• To send the image using multimedia, e-mail, Bluetooth
connectivity, infrared, press the call key, or select Send.
For more information, see ‘Messaging’, p. 88,
‘Bluetooth connectivity’, p. 28. This option is not
available during an active call.
You can also send the image to a call recipient during
an active call. Select Send to caller (only available
during an active call).
• To send the image to a compatible online album, select
Sign in for Online Share. If you are already signed into
an online service, select Post to (available only if you
have set up an account for a compatible online album).
See ‘Share online’, p. 67.
53
Camera
• To tag images to the Print Basket for later printing,
select Add to Print Basket.
To use the picture as wallpaper in the active standby, select
Options > Set as wallpaper.
To set the image as a call image for a contact, select Set
as contact call img..
These resolutions are only available in the main camera.
Add to album—Select whether you want to save the image
to a certain album in the gallery. If you select Yes, a list of
available albums opens.
To return to the viewfinder to capture a new image, press
the capture key.
Show captured image—Select Yes if you want to see the
captured image after it is taken, or No if you want to
continue taking pictures immediately.
Still image camera settings
Default image name—Define the default name for the
captured images.
There are two kinds of settings for the still image camera:
Image setup and main settings. To adjust Image setup, see
‘Setup settings—adjust color and lighting’, p. 55. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
change them again. To change the main settings, select
Options > Settings and from the following:
Image quality—Print 5M - Large (2592x1944 resolution),
Print 3M - Medium (2048x1536 resolution), Print 2M Medium (1600 x 1200), E-mail 0.8M - Med. (1024x768
resolution), or MMS 0.3M - Small (640x480 resolution).
The better the image quality, the more memory the image
consumes. If you want to print the image, select Print 5M
- Large, Print 3M - Medium, or Print 2M - Medium. If
you want to send it through e-mail, select E-mail 0.8M -
54
Med.. To send the image through MMS, select MMS 0.3M
- Small.
Extended digital zoom (main camera only)—Select On to
allow the zoom increments to be smooth and continuous
between digital and extended digital zoom. If you want to
limit the zoom to where the selected image quality is
maintained, select Off.
Capture tone—Select the tone you want to hear when you
take a picture.
Memory in use—Select where to store your images.
Rotate image - Select whether you want the image to be
rotated the right way up when you open it in the gallery.
Restore camera settings—Select Yes to return the default
values to the camera settings.
Colour tone—Select a color effect from the list.
The flash is available only in the main camera.
Light sensitivity (images only)—Select the light sensitivity
of the camera. The darker the environment, the higher the
light sensitivity should be.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
The camera has an LED flash for low light conditions. The
following flash modes are available for the still image
camera: Automatic ( ), R. eye redu. ( ), On ( ), and
Off ( ).
The screen display changes to match any settings you
make, so that you see how the change affects the pictures
or videos.
The available settings vary depending on the selected
camera.
Setup settings—adjust color and
lighting
The setup settings are camera specific; if you change the
settings in the secondary camera, the settings in the main
camera do not change. The setup settings do, however,
transfer between the image and video modes. The setup
settings return to the default settings when you close the
camera.
To enable the camera to reproduce colors and lighting
more accurately, or to add effects to your pictures or
videos, use the scroll key to scroll through the active
toolbar, and select from the following options:
If you select a new scene, the color and lighting settings
are replaced by the selected scene. See ‘Scenes’, p. 55. You
can change the setup settings after selecting a scene if
needed.
White balance—Select the current lighting condition from
the list. This allows the camera to reproduce colors more
accurately.
Scenes
To change the flash mode, in the active toolbar, select the
desired flash mode.
Exposure compensation (images only)—Adjust the
exposure time of the camera.
Flash—Select the desired flash mode. See ‘Flash’, p. 55.
Camera
Flash
A scene helps you to find the right color and lighting
settings for the current environment. The settings of each
scene have been set according to a certain style or
environment.
55
Camera
Scenes are only available in the main camera.
In the active toolbar, select from the following options:
Video scenes
Automatic (
) (default) and Night (
)
Image scenes
Auto ( ) (default), User defined ( ), Close-up mode
( ), Portrait ( ), Landscape ( ), Sports ( ), Night
( ), and Night portrait ( ).
When you take pictures, the default scene is Auto. You can
select the User defined scene as the default scene.
To make your own scene suitable for a certain
environment, scroll to User defined, and select Options >
Change. In the user defined scene you can adjust different
lighting and color settings. To copy the settings of another
scene, select Based on scene mode and the desired scene.
Take pictures in a sequence
56
To take six pictures, press the capture key. To stop taking
pictures, press Cancel. To take more than six pictures, press
and hold the capture key. To stop taking pictures, release
the capture key. You can capture up to 100 images,
depending on the available memory.
To use a time period for taking pictures, select Switch to
sequence mode, and a time preriod. To start taking
pictures, press the capture key. To stop taking pictures
before the time ends, press the capture key again.
After you take the pictures, they are shown in a grid on the
display. To view a picture, press
to open it. If you used
a time period for taking pictures, the last taken picture is
shown on the display. To view other pictures, press
.
You can also use the sequence mode with the self-timer.
When using the self-timer, the maximum amount of
pictures is six pictures.
To return to the sequence mode viewfinder, press the
capture key.
The sequence mode is available only in the main camera.
You in the picture—self-timer
To set the camera to take six pictures or more in a
sequence (if enough memory available), in the active
toolbar, select Switch to sequence mode > Burst to take
six pictures, or the time period for taking pictures. The
number of pictures taken depends on the available
memory.
The self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
in the active toolbar, select Self timer > 2 seconds, 10
seconds, or 20 seconds. To activate the self-timer, select
To switch off Self timer, in the active toolbar, select Self
timer > Off.
Tip! In the active toolbar, select Self timer > 2
seconds to keep your hand steady when taking a
picture.
are no keypresses within a minute. Press Continue to
resume recording.
To zoom in or out of the subject, press the zoom key on the
side of the device.
To make lighting and color adjustments before recording a
video, use the scroll key to scroll through the active
toolbar. See ‘Setup settings—adjust color and lighting’,
p. 55 and ‘Scenes’, p. 55.
Record videos
To activate the front camera, select Options > Use
secondary camera.
1 To activate the main camera, open the lens cover. If the
Video capture indicators
camera is in the Image mode, select Video mode from
the active toolbar.
2 Press the capture key to start recording. In the portrait
mode, use the scroll key for recording. The red record
icon
is shown and a tone sounds, indicating that
recording has started.
3 Select Stop to stop recording. The video clip is
automatically saved to the Images & vids. folder of
Gallery. See ‘Gallery’, p. 60. The maximum length of the
video is 60 minutes (if enough memory available).
To pause recording at any time, press Pause. The pause
icon ( ) blinks on the display. Video recording
automatically stops if recording is set to pause and there
Camera
Activate. The quadrangle blinks and the device beeps
when the timer is running. The camera takes the picture
after the selected delay elapses.
The video viewfinder displays the following:
1 The current capture mode indicator.
2 The audio mute on indicator.
3 The active toolbar, which you can scroll through before
recording to select different items and settings (the
toolbar is not displayed during recording). See ‘Active
toolbar’, p. 52.
4 Battery charge level indicator.
5 The video quality indicator indicates whether the
quality of the video is TV High quality, TV normal
quality, E-mail high quality, E-mail norm. quality, or
Sharing quality.
6 The video clip file type.
57
Camera
7 The total available video recording time. When you are
• To send the video clip using multimedia, e-mail,
recording, the current video length indicator also
shows the elapsed time and time remaining.
8 The device
memory ( )
and memory
card ( )
indicators
show where
videos are
saved.
9 The video
stabilisation is
turned on
( ). See ‘Video settings’, p. 58.
Bluetooth connectivity, or infrared, press the call key,
or select Send. For more information, see ‘Messaging’,
p. 88 and ‘Bluetooth connectivity’, p. 28. This option is
not available during an active call. You may not be able
to send video clips saved in the .mp4 file format in a
multimedia message.
You can also send the video clip to a call recipient
during an active call. Select Send to caller.
• To upload the video clip to a compatible online album,
select Sign in for Online Share. If you are already
signed into an online service, select Post to (available
only if you have set up an account for a compatible
online album). See ‘Share online’, p. 67.
• To return to the viewfinder to record a new video clip,
press the capture key.
To display all viewfinder indicators, select Options > Show
icons. Select Hide icons to display only the video status
indicators, and during the recording, the available record
time, zoom bar when zooming, and the selection keys.
After recording a video
After you record a video clip, select the following from the
active toolbar (available only if Show captured video is set
to Yes in Video settings):
• To immediately play the video clip you just recorded,
select Play.
• If you do not want to keep the video, select Delete.
58
Video settings
There are two kinds of settings for the video recorder:
Video setup and main settings. To adjust Video setup
settings, see ‘Setup settings—adjust color and lighting’,
p. 55. The setup settings return to the default settings after
you close the camera, but the main settings remain the
same until you change them again. To change the main
settings, select Options > Settings and from the
following:
Default video name—Define the default name for the
captured video clips.
Memory in use—Define the default memory store: device
memory or memory card (if inserted).
Camera
Video quality—Set the quality of the video clip to TV High
quality, TV normal quality, E-mail high quality, E-mail
norm. quality (standard quality for playback through your
handset), or Sharing quality. If you want to view the video
on a compatible TV or PC, select TV High quality or TV
normal quality, which have VGA resolution (640x480) and
the .mp4 file format. You may not be able to send video
clips saved in the .mp4 file format in a multimedia
message. To send the video clip through MMS, select
Sharing quality (QCIF resolution, .3gp file format). The size
of the video clip recorded with Sharing quality is limited
to 300 KB (about 20 seconds in duration) so that it can be
conveniently sent as a multimedia message to a
compatible device.
Restore camera settings—Select Yes to return the default
values to the camera settings.
Video stabilisation—Select On to reduce camera shaking
when recording the video.
Audio recording—Select Off if you do not want to record
sound.
Add to album—Select whether you want to add the
recorded video clip to a certain album in Gallery. Select
Yes to open a list of available albums.
Show captured video—Select whether you want the first
frame of the recorded video clip to be shown on the display
after the recording stops. Select Play from the active
toolbar (main camera) or Options > Play (secondary
camera) to view the video clip.
59
Gallery
Gallery
To store and organise your images, video clips, sound clips,
and streaming links, or share your files with other
compatible Universal Plug and Play (UPnP) devices through
wireless LAN, press
, and select Gallery.
You can also create albums; and mark, copy, and add items
to albums. See ‘Albums’, p. 62.
Tip! If you are in another application, to view the last
saved picture in Gallery, press the review key
on
the side of your device. To enter the Images & videos
folder main view, press the review key again.
To open a file, press . Video clips, .ram files, and
streaming links are opened and played in RealPlayer, and
music and sound clips in Music player. See ‘RealPlayer’,
p. 47, and ‘Music player’, p. 35.
View and browse files
Select Images & videos
, Tracks , Sound
clips , Streaming links
, Presentations ,
All files , or Home
network
, and press
to open it. The content
in the Images & videos
folder is shown in the
landscape mode.
You can browse and open
folders; and mark, copy,
and move items to folders.
60
Files stored on your compatible memory card (if inserted)
are indicated with
.
To copy or move files to the memory card (if inserted) or to
device memory, select a file and Options > Move and
copy > Copy to memory card or Move to memory card,
or Copy to phone mem. or Move to phone mem..
To download sound clips into Gallery using the browser, in
the Sound clips folders, select Downld. sounds.
Images and video clips
Pictures taken and video clips recorded with the camera
are stored in the Images & videos folder in Gallery. Images
and video clips can also be sent to you in a multimedia
message, as an e-mail attachment, or through Bluetooth
connectivity or infrared. To be able to view a received
image or video clip in Gallery or in the media player, you
The video clips saved in Video centre are not shown in
Images & videos in Gallery. To view video clips in Video
centre, see ‘Video centre’, p. 44.
Select Gallery >
Images & videos.
The images and
video clip files are
in a loop, and
ordered by date
and time. The
number of files is
displayed. To
browse the files
one by one, press
or
. To browse files in groups, press
To create custom video clips, select a video clip or several
clips in the gallery, and select Options > Edit. See ‘Edit
video clips’, p. 64.
Gallery
must save it in the device memory or on a compatible
memory card (if inserted).
To print your images on a compatible printer, or to store
them on a compatible memory card (if inserted) for
printing, select Options > Print. See ‘Image print’, p. 65.
You can also tag images for later printing to the Print
Basket in Gallery. See ‘Print Basket’, p. 62.
To add an image or a video clip to an album in the gallery,
select Options > Albums > Add to album. See ‘Albums’,
p. 62.
To use the picture as a background image, select the
picture and Options >Use image > Set as wallpaper.
To delete an image or video clip, from the active toolbar,
select Delete. See ‘Active toolbar’, p. 61.
or
.
When the image is opened, to zoom in an image, press the
zoom key on the side of your device. The zooming ratio is
not stored permanently.
To rotate the selected image left or right, select Options >
Rotate > Left or Right.
To edit a video clip or a photo, select Options > Edit. See
‘Edit video clips’, p. 64. See ‘Edit images’, p. 63.
To switch from Gallery to the camera, press the capture
key, and open the lens cover in the back.
Active toolbar
In the Images & videos folder, you can use active toolbar
as a shortcut to select different tasks. The active toolbar is
available only when you have selected an image or a video
clip.
In the active toolbar, scroll up or down to different items,
and select them by pressing the scroll key. The available
61
Gallery
options vary depending on the view you are in and whether
you have selected an image or a video clip. You can also
define whether the active toolbar is always visible on the
display or activated by a keypress.
If you want the active toolbar to be visible on the display,
select Options > Show icons.
If you want the active toolbar to be visible only when you
need it, select Options > Hide icons. To activate the active
toolbar, press .
Select from the following:
to play the selected video clip
to send the selected image or video clip
/
to add or remove an image from the Print Basket.
See ‘Print Basket’, p. 62.
to view the images in the Print basket
to start a slide show of your images
to delete the selected image or video clip
to print the viewed image
The available options may vary depending on the view you
are in.
62
Print Basket
You can tag images to the Print Basket, and print them
later with a compatible printer or in a compatible printing
kiosk, if available. See ‘Image print’, p. 65. The tagged
images are indicated with
in the Images & videos
folder and albums.
To tag an image for later printing, select an image, and
Add to Print Basket from the active toolbar.
To view the images in the Print Basket, select View Print
Basket from the active toolbar, or select
from the
Images & videos folder (available only when you have
added pictures to the Print Basket).
To remove an image from the Print Basket, select an image
in the Images & videos folder or in an album, and Remove
from print from the active toolbar.
Albums
With albums you can conveniently manage your images
and video clips. To view the albums list, select Images &
videos > Options > Albums > View albums.
To add a picture or a video clip to an album in the gallery,
scroll to a picture or video clip, and select Options >
Albums > Add to album. A list of albums opens. Select the
album to which you want to add the picture or video clip.
area, select Back. The selected areas form a rectangle that
forms the cropped image.
To remove a file from an album, press . The file is not
deleted from the Images & videos folder in Gallery.
If you selected a predefined aspect ratio, select the upper
left corner of the area to be cropped. To resize the
highlighted area, use the scroll key. To freeze the selected
area, press . To move the area within the picture, use the
scroll key. To select the area to be cropped, press .
To create a new album, in the albums list view, select
Options > New album.
Edit images
Reduce redness
To edit the pictures after taking them, or the ones already
saved in Gallery, select Options > Edit.
To reduce redness of the eyes in an image, select Options >
Apply effect > Red eye reduction. Move the cross onto
the eye, and press . A loop appears on the display. To
resize the loop to fit the size of the eye, use the scroll key.
To reduce the redness, press .
Select Options > Apply effect to open a grid where you
can select different edit options indicated by small icons.
You can crop and rotate the image; adjust the brightness,
color, contrast, and resolution; and add effects, text, clip
art, or a frame to the picture.
Crop image
To crop an image, select Options > Apply effect > Crop.
To crop the image size manually, select Manual or a
predefined aspect ratio from the list. If you select Manual,
a cross appears in the upper left corner of the image. Use
the scroll key to select the area to crop, and select Set.
Another cross appears in the lower right corner. Again
select the area to be cropped. To adjust the first selected
Gallery
The added pictures and video clips are not deleted from the
Images & videos folder.
Useful shortcuts
Shortcuts in the image editor:
• To view an image in the full screen, press
. To return
to the normal view, press
again.
• To rotate an image clockwise or counterclockwise,
press
or
.
• To zoom in or out, press
or
.
• To move on a zoomed image, scroll up, down, left, or
right.
63
Gallery
Edit video clips
To edit video clips in Gallery and create custom video clips,
scroll to a video clip, and select Options >Edit.
Video editing supports .3gp and .mp4 video file formats,
and .aac, .amr, .mp3, and .wav audio file formats.
Tip! If you want to send a video clip that is over the
maximum multimedia message size allowed by your
service provider, send the clip using Bluetooth wireless
technology. You can also transfer your videos to a
compatible PC using Bluetooth connectivity, a
compatible USB cable, or by using a compatible
memory card reader enhancement.
To make the slide show move smoothly from one slide to
another, and let the gallery randomly zoom in and out in
the images, select Zoom and pan.
To add sound to the slide show, select Options > Slide
show > Settings and from the following:
Music—Select On or Off.
Song—Select a music file from the list.
To decrease or increase the volume, use the volume key in
your device.
Slide show
TV out mode
In the active toolbar, select Slide show ( ) to view a
slide show of images in full screen. The slide show starts
from the selected file. Select from the following:
To view the captured images and video clips on a
compatible TV, use a Nokia Video Connectivity Cable.
Pause—to pause the slide show
Continue—to resume the slide show, if paused
End—to close the slide show
To browse the images, press
(previous) or
(available only when Zoom and pan is off).
64
To adjust the tempo of the slide show, before starting the
slide show, select Options > Slide show > Settings >
Delay between slides.
(next)
Before viewing the images and video clips on TV, you must
configure the TV out settings for the applicable TV system
and TV aspect ratio. See ‘Enhancement’, p. 120.
To watch images and video clips on TV, do the following:
1 Connect a Nokia Video Connectivity Cable to the video
input of a compatible TV.
2 Connect the other end of the Nokia Video Connectivity
Cable to the Nokia AV Connector of your device.
to select the
cable mode.
4 Press
, and
select
Gallery >
Videos &
images and
the file you want to view.
The images are shown in the image viewer, and the video
clips are played in RealPlayer.
All audio, including the stereo video clip sound, ringing
tone, and key tone, is routed to the TV when the Nokia
Video Connectivity Cable is connected to the device. You
can use the device microphone normally.
For all applications other than the Images & vids. folder in
Gallery and RealPlayer, the TV screen displays what is
displayed on the screen of your device.
The opened image is displayed in full screen on the TV.
When you open an image in the thumbnail view while it is
viewed on the TV, Zoom in is not available.
When you open a highlighted video clip, RealPlayer starts
playing the video clip on the device display and the TV
screen. See ‘RealPlayer’, p. 47.
You can view images as a slide show on TV. All items in an
album or marked images are displayed on the TV in full
screen while the selected music plays. See ‘Slide show’,
p. 64.
Gallery
3 You may need
Presentations
With presentations, you can view SVG (scalable vector
graphics) files, such as cartoons and maps. SVG images
maintain their appearance when printed or viewed with
different screen sizes and resolutions. To view SVG files,
select Presentations, scroll to an image, and select
Options > Play. To pause playing, select Options > Pause.
To zoom in, press
. To zoom out, press
.
To rotate the image 90 degrees clockwise or
counter-clockwise, press
or
. To rotate the image
45 degrees, press
or
.
To switch between full screen and normal screen,
press
.
Image print
To print images with Image print, select the image you
want to print, and the print option in the gallery, camera,
image editor, or image viewer.
65
Gallery
Use Image print to print your images using a compatible
USB data cable, wireless LAN, Bluetooth connectivity, or a
compatible memory card (if available).
You can only print images that are in .jpeg format. The
pictures taken with the camera are automatically saved in
.jpeg format.
To print to a printer compatible with PictBridge, connect
the data cable before you select the print option, and
check that the data cable mode is set to Image print or
Ask on connection. See ‘USB’, p. 32.
After you select the printer, the selected images are
displayed using predefined layouts. To change the layout,
press
or
to browse through the available layouts
for the selected printer. If the images do not fit on a single
page, press
or
to display the additional pages.
Print settings
The available options vary depending on the capabilities of
the printing device you selected.
Printer selection
To set a default printer, select Options > Default printer.
When you use Image print for the first time, a list of
available compatible printers is displayed after you select
the image. Select a printer. The printer is set as the default
printer.
To select the paper size, select Paper size, the size of paper
from the list, and OK. Select Cancel to return to the
previous view.
If you have connected a printer compatible with PictBridge
using a compatible USB data cable, the printer is
automatically displayed.
Print online
If the default printer is not available, a list of available
printing devices is displayed.
To change the default printer, select Options > Settings >
Default printer.
66
Print preview
With Print online, you can order prints of images online
directly to your home, or to a store where you can pick
them up. You can also order different products with the
selected image, such as mugs or mouse pads. The available
products depend on the service provider.
To use Print online, you must have at least one printing
service configuration file installed. The files can be
For more information on the application, see the
Additional applications leaflet for your device at
www.nseries.com/support or your local Nokia website.
Share online
With Online share, you can share images and video clips
in compatible online albums, weblogs, or in other online
sharing services on the web. You can upload content, save
unfinished posts as drafts and continue later, and view the
content of the albums. The supported content types may
vary depending on the service provider.
To use Online share, you must subscribe to the service
with an online image sharing service provider, and create
a new account. You can usually subscribe to the service on
the web page of the service provider. Contact your service
provider for details on subscribing to the service. For more
information on compatible service providers, see the
product support pages at www.nseries.com/support or
your local Nokia website.
For more information on the application, see the
Additional applications leaflet for your device at
www.nseries.com/support or your local Nokia website.
Home network
Your device is compatible with Universal Plug and Play
architecture (UPnP). Using a wireless LAN access point
device or a wireless LAN router, you can create a home
network and connect compatible UPnP devices that
support wireless LAN to the network, such as your Nokia
N95, a compatible PC, a compatible printer, and a
compatible sound system or TV, or a sound system or TV
equipped with a compatible wireless multimedia receiver.
Gallery
obtained from printing service providers that support Print
online.
Using the wireless LAN function of the Nokia N95 in a
home network requires a working wireless LAN home
connection setup and the other target home devices to be
UPnP enabled and to be connected to the same home
network.
The home network uses the security settings of the
wireless LAN connection. Use the home network feature in
a wireless LAN infrastructure network with a wireless LAN
access point device and encryption enabled.
You can share media files saved in Gallery with other
compatible UPnP devices using the home network. To
manage your Home netw. settings, press
, and select
Tools > Connectivity > Home netw.. You can also use the
home network to view, play, copy, or print compatible
media files from Gallery. See ‘View and share media files’,
p. 69.
67
Gallery
Important: Always enable one of the available
encryption methods to increase the security of your
wireless LAN connection. Using encryption reduces the risk
of unauthorised access to your data.
Your device is connected to the home network only if you
accept a connection request from another compatible
device, or in Gallery, select the option to view, play, print,
or copy media files on your Nokia N95 or search for other
devices in the Home network folder.
Important security information
When you configure your wireless LAN home network,
enable an encryption method on your access point device,
then on the other devices you intend to connect to your
home network. Refer to the documentation of the devices.
Keep any passcodes secret and in a safe place separate
from the devices.
To view or change the settings of the wireless LAN Internet
access point in your device, see ‘Access points’, p. 127.
If you use the ad hoc operating mode to create a home
network with a compatible device, enable one of the
encryption methods in WLAN security mode when you
configure the Internet access point. This step reduces the
risk of an unwanted party joining the ad hoc network.
68
Your device notifies you if another device attempts to
connect to it and the home network. Do not accept
connection requests from an unknown device.
If you use wireless LAN in a network that does not have
encryption, switch off sharing Nokia N95 files with other
devices, or do not share any private media files. To change
sharing settings, see ‘Home network settings’, p. 68.
Home network settings
To share media files saved in Gallery with other compatible
UPnP devices through wireless LAN, you must create and
configure your wireless LAN home Internet access point,
then configure the Home netw. application. See ‘Wireless
LAN’, p. 26 and the wireless LAN settings in ‘Access points’,
p. 127.
The options related to Home netw. are not available in
Gallery before the Home netw. settings have been
configured.
When you access the home network application for the
first time, the setup wizard opens, and helps you to define
the home network settings for your device. To use the
setup wizard later, in the home network main view, select
Options > Run wizard, and follow the instructions on the
display.
Content sharing on, the other UPnP compatible devices in
the home network can view and copy your files you have
selected for sharing in the Images & video folder.
Configure settings
Images & video—Select media files for sharing with other
devices, or view the sharing status of Images & video. To
update the content of the folder, select Options > Refresh
content.
To configure the home network application, select Tools >
Connectivity > Home netw. > Settings and from the
following:
Home access point—Select Always ask if you want the
device to ask for the home access point every time you
connect to the home network, Create new to define a new
access point that is used automatically when you use
Home netw., or None. If your home network does not have
wireless LAN security settings enabled, you get a security
warning. You can continue, and switch the wireless LAN
security on later; or cancel defining the access point, and
first switch on the wireless LAN security. See Wireless LAN
in ‘Access points’, p. 127.
View and share media files
Device name—Enter a name for your device that is shown
to the other compatible devices in the home network.
Show media files stored in your device
Set sharing on and define content
Select Tools > Connectivity > Home netw. > Share
content and from the following:
Content sharing—Allow or deny sharing media files with
compatible devices. Do not set Content sharing on before
you have configured all the other settings. If you set
Gallery
To connect a compatible PC to the home network, on the
PC, you must install the related software from the
CD-ROM or DVD-ROM supplied with your device.
If Content sharing is on in your device, the other UPnP
compatible devices in the home network can view and
copy the media files you have selected to share in Share
content. If you do not want the other devices to access
your files, set Content sharing off. Even if Content
sharing is off in your device, you can still view and copy
the media files stored in another home network device if it
is allowed by the other device.
To select images and videos stored in your device, and
show them in another home network device, such as a
compatible TV, do the following:
1 In Gallery, select an image or a video clip.
2 Select Options > Show via home network.
3 Select a compatible device in which the media file is
shown. The images are shown both in the other home
69
Gallery
network device and your device, and the video clips are
played only in the other device.
Show media files stored in the other device
To select media files that are stored on another home
network device, and show them in your device (or in a
compatible TV, for example), do the following:
1 Press
and select Tools > Connectivity > Home
netw. > Browse home. Your device starts the search of
other compatible devices. Device names start to appear
on the display.
2 Select a device from the list.
3 Select the type of media you want to view from the
other device. The available file types depend on the
features of the other device.
4 Select the image, video clip, music clip, or folder you
want to view, and select Show via home network
(images and video) or Play via home network (music).
5 Select the device in which the file is shown. In the
home network, you cannot play music in your device,
but you can play it in compatible external devices, and
use your device as a remote control.
To stop sharing the media file, select Options > Stop
showing.
To print images saved in Gallery through Home netw. with
a UPnP compatible printer, select the print option in
70
Gallery. See ‘Image print’, p. 65. Content sharing does not
have to be switched on.
To search files with different criteria, select Options >
Find. To sort the found files, select Options > Sort by.
Copy media files
To copy or transfer media files from your device to another
compatible device, such as a UPnP compatible PC, select a
file in Gallery and Options > Move and copy > Copy to
home network or Move to home net.. Content sharing
does not have to be switched on.
To copy or transfer files from the other device to your
device, select a file in the other device and Options > Copy
to phone or Copy to memory card (the name of the
memory card if the memory card is available). Content
sharing does not have to be switched on.
The Global Positioning System (GPS) is a worldwide radio
navigation system that includes 24 satellites and their
ground stations that monitor the operation of the
satellites. Your device has an internal GPS receiver.
GPS should only be used as a navigation aid. It should not
be used for precise location measurement and you should
never rely solely on location data from the GPS receiver for
positioning or navigation.
A GPS terminal, such as the GPS receiver in your device,
receives low-power radio signals from the satellites, and
measures the travel time of the signals. From the travel
time, the GPS receiver can calculate its location to the
accuracy of meters.
Your device also supports Assisted GPS (A-GPS).
The coordinates in the GPS are expressed in degrees and
decimal degrees format using the international WGS-84
coordinate system.
The Global Positioning System (GPS) is operated by the
government of the United States, which is solely
responsible for its accuracy and maintenance. The
accuracy of location data can be affected by adjustments
to GPS satellites made by the United States government
and is subject to change with the United States
Department of Defense civil GPS policy and the Federal
Radionavigation Plan. Accuracy can also be affected by
poor satellite geometry. Availability and quality of GPS
signals may be affected by your location, buildings, natural
obstacles, and weather conditions. The GPS receiver should
only be used outdoors to allow reception of GPS signals.
Positioning
Positioning
Assisted GPS (A-GPS) uses a packet data connection to
retrieve assistance data to improve GPS performance. It
decreases the time to calculate the current location of
your device when your device is receiving signals from
satellites.
A-GPS is a network service.
Your device is preconfigured to use the Nokia A-GPS
service, if no service provider specific A-GPS settings are
available. The assistance data is retrieved from the Nokia
A-GPS service server only when needed.
You must have a packet data internet access point defined
in the device to retrieve assistance data from the Nokia AGPS service. To define an access point for A-GPS, press
,
and select Tools > Settings > General > Positioning >
Positioning server > Access point. A WLAN access point
cannot be used for this service. The packet data internet
access point is asked when GPS is used for the first time in
your device.
71
Positioning
To enable or disable different positioning methods,
Positioning (GPS) such as Bluetooth GPS, press
, and
select Tools > Settings > General > Positioning >
Positioning methods.
• If you are indoors, go outdoors to receive a better
GPS receiver
of your device. For the location of the antenna, see ‘GPS
receiver’, p. 72.
• If the weather conditions are bad, in such a case the
signal strength may also be affected.
• Establishing a GPS connection may take from a couple
of seconds to several minutes.
The GPS receiver is
located in the bottom of
the device. When using
the receiver, slide the
numeric keypad open
and hold the device
upright in your hand at
an angle of about 45
degrees, with a clear
view of the sky.
Establishing a GPS connection may take from a couple of
seconds to several minutes. Establishing a GPS connection
in the car may take longer.
The GPS receiver takes its power from the battery. Using
the GPS receiver may drain the battery faster.
About satellite signals
If your device cannot find the satellite signal, consider the
following:
72
signal.
• If the numeric keypad slide is closed, open it.
• If you are outdoors, move to a more open space.
• Check that your hand does not cover the GPS antenna
Satellite status
To check how many satellites your device has found, and
whether your device is receiving satellite signals, press
,
and select Tools > Connectivity > GPS data > Position >
Options > Satellite status. If your device has found
satellites, a bar for each satellite is shown in the satellite
info view. The longer the bar, the stronger the satellite
signal. When your device has received enough data from
the satellite signal to calculate the coordinates of your
location, the bar turns black.
Initially your device must receive signals from at least four
satellites to be able to calculate the coordinates of your
location. When the initial calculation has been made, it
may be possible to continue calculating the coordinates of
‘Positioning’, p. 124. For the most accurate location
information, use either the internal GPS or the external
GPS receiver.
Position requests
When you use Maps for the first time, you may need to
define an internet access point for downloading map
information for your current location. To change the
default access point later, select Options > Settings >
Network > Default access point.
You may receive a request from a network service to
receive your position information. Service providers may
offer information about local topics, such as weather or
traffic conditions, based upon the location of your device.
When you receive a position request, a message is
displayed showing the service that is making the request.
Select Accept to allow your position information to be
sent or Reject to deny the request.
Maps
Positioning
your location with three satellites. However, the accuracy
is generally better when more satellites are found.
Almost all digital cartography is inaccurate and
incomplete to some extent. Never rely solely on the
cartography that you download for use in this device.
Downloading maps may involve the transmission of large
amounts of data through your service provider's network.
Contact your service provider for information about data
transmission charges.
Tip! You can also download maps by using a WLAN
connection, or through the internet using Nokia
MapLoader. See ‘Download maps’, p. 75.
Press
, and select Maps. With Maps, you can see your
current location on the map, browse maps for different
cities and countries, search for addresses and different
points of interest, plan routes from one location to
another, and save locations as landmarks and send them to
compatible devices.
To receive a note when your device registers to a network
outside your home cellular network, select Options >
Settings > Network > Roaming warning > On.
You can also purchase extra services, such as city guides
and a navigation service with voice guidance.
Browse maps
Maps uses GPS. You can define the positioning methods
used with your device in the device settings. See
The map coverage varies by country.
73
Positioning
When you open the Maps application, Maps zooms in to
the location that was saved from your last session. If no
position was saved from the last session, the Maps
application zooms in to the major city of the country or
region you are in, based on the information the device
receives from the cellular network. At the same time, the
map of the location is downloaded. The maps are
automatically saved in the device memory or on a
compatible memory card (if inserted).
To establish a GPS connection and zoom in to your current
location, select Options > Find place > GPS position [0],
or press
.
To move on the map, scroll up, down, left, or right. To view
detailed information of a location on the map, scroll to it,
press
and select Show details. To use the location, for
example, as a starting point for a nearby search or to plan
a route, press the scroll key, and select the desired option.
To return to your current location, press
, or select
Options > Find place > GPS position [0].
When you browse the map on the display, for example,
move to another country, a new map is downloaded
automatically. These downloaded maps are free of charge,
but downloading may involve the transmission of large
amounts of data through your service provider's network.
For more information on data transmission charges,
contact your service provider.
74
The maps are automatically saved in the device memory.
To zoom in or out on the map, press
or
. To switch
between the 2-D and 3-D views, select Options > Map
options > 2D/3D.
To define what kind of points of interest are shown on the
map, select Options > Map options > Categories and the
desired categories.
To view information about satellites when you are using
Maps, select Options > Map options > Satellite info. You
can also see a GPS indicator on the display when browsing
maps. It indicates whether your device is receiving signals
from satellites. See ‘Satellite information’, p. 75.
To save a location as a landmark, in the desired location,
press , and select Save > As landmark, enter a name for
the landmark, and select the categories you want to
include it in.
To take a screenshot of your location, select Save > As
image. The screenshot is saved in Gallery.
To view saved landmarks, select Options > Find place >
Landmark. To send a landmark to a compatible device, in
the landmarks view, press , and select Send. If you send
the landmark in a text message, the information is
converted to plain text.
To adjust the network, routing, and general settings, select
Options > Settings.
Download maps
A GPS indicator is shown on the display when you browse
maps. The circles in the icon are satellites.
When you browse the map on the display, for example,
move to another country, a new map is downloaded
automatically. These downloaded maps are free of charge,
but downloading may involve transmission of large
amounts of data through your service provider's network.
For more information on data transmission charges,
contact your service provider.
A yellow circle indicates that the device has found a
satellite, and a green circle that the device is receiving
signal from the satellite. When all the circles are green, the
device receives enough data from the satellites to
calculate the coordinates of your current location.
To check how many satellites your device has found, and
whether your device is receiving satellite signals from the
satellites, select Options > Map options > Satellite info.
You can view the amount of transferred data from the data
counter (kB) shown on the display. The counter shows the
amount of network traffic when you browse maps, create
routes, or search for locations online.
If your device has found satellites, a bar for each satellite
is shown in the satellite info view. The longer the bar, the
stronger the satellite signal. When your device has
received enough data from the satellite signal to calculate
the coordinates of your location, the bar turns black.
To check whether the maps that are downloaded to your
device have been updated on the map server, select
Options > Settings > Network > Options > Check for
map updates.
Initially your device must receive signals from at least four
satellites to be able to calculate the coordinates of your
location. When the initial calculation has been made, it
may be possible to continue calculating the coordinates of
your location with three satellites. However, the accuracy
is generally better when more satellites are found.
Positioning
Satellite information
To prevent the device from automatically downloading
maps through the internet, for example, when you are
outside your home cellular network, select Options >
Settings > Network > Use network > Off.
To define how much space you want to use on a
compatible memory card for saving maps data or voice
guidance files, select Options > Settings > Network >
Max. memory card use (%). This option is available only
when a compatible memory card is inserted. When the
memory is full, the oldest map data is deleted. The saved
75
Positioning
maps data cannot be deleted manually from the memory
card.
Search for locations
Nokia Map Loader
To view points of interest near your current location or
other locations on the map, select Options > Find place >
Nearby and a category.
Nokia Map Loader is PC software that you can use to
download and install maps for different countries to your
device from the internet. You can also use it to download
voice files for turn-by-turn navigation.
To use Nokia Map Loader, you must first install it to a
compatible PC. You can download the PC software from
the internet at www.nokia.com/maps. Follow the
instructions on the screen.
You must use the Maps application before using Nokia
Map Loader. Nokia Map Loader uses the Maps history
information to check the version of map data to be
downloaded.
After you have installed the PC software to your PC, to
download maps, do the following:
1. Connect your device to the PC by using a compatible
USB data cable. Select Mass storage as the USB
connection mode.
2. Open Nokia Map Loader in your PC. Nokia Map Loader
checks the version of map data to be downloaded.
3. Select the maps you want, and download and install
them to your device.
76
To search for a point of interest by name, select Options >
Find place > Keyword search, or start entering the first
letters of the name, and select Find place.
To search for a location by address, select Options > Find
place > By address. You must enter the city and country.
To use an address you have saved to a contact card in
Contacts, select Options > Find place > By address >
Options > Select from contacts.
To view a search result on a map, press and select Show
on map. To return to the results list, select Back.
To view a list of your previous locations, select Options >
Find place > Recent.
Plan a route
To plan a route from one location to another (for example,
from your home to your office), do the following:
1. Scroll to a point on the map, press
, and select Route
from.
2. Scroll to From, and select Options > Select, and the
desired option.
3. To select the destination, scroll to To, and select
Options > Select, and the desired option.
4. To view the route itinerary, select Options > Show
route. The route is calculated using the selected
routing settings.
To view the itinerary waypoints on the map, select
Options > Show on map.
To run a simulation of the created route, select Options >
Start simulation.
Tip! You can also use a compatible GPS receiver with
Bluetooth connectivity with Maps. For example, in a car,
an external GPS receiver can be positioned so that it has a
clear view of the sky. To enable the use of an external GPS
receiver, see ‘Positioning’, p. 124.
Extra services for Maps
You can purchase and download different kinds of guides,
such as city and travel guides, for different cities to your
device. You can also purchase a turn-by-turn navigation
service with voice guidance to use it in Maps.
The downloaded guides are automatically saved in the
device memory or on a compatible memory card (if
inserted).
Navigation
To purchase a navigation service with voice guidance to
use in Maps, select Options > Extra services > Add
navigation.
Positioning
To adjust the routing settings, such as the mode of
transportation, select Options > Settings > Routing.
After purchasing the navigation upgrade, the service is
available through Maps. The license you purchase for
navigation is device specific and cannot be transferred
from your device to another device.
After creating a route in Maps, to start navigation to the
desired destination with GPS using voice guidance, select
Options > Start navigation. See ‘Plan a route’, p. 76. You
can also start navigation by selecting any location on the
map or in a results list, and Navigate to.
When you use navigation for the first time, you are
prompted to select the language of the voice guidance,
and download the voice guidance files of the selected
language online. To change the language later, in Maps
main view, select Options > Settings > General > Voice
guidance, a language, and download the voice guidance
files for the selected language. You can also download
voice guidance files using Nokia MapLoader. See
‘Download maps’, p. 75.
77
Positioning
To discard the created route and use another route, select
Options > Alternative route.
To view only the next turns and hide the map, select
Options > Map options > Next turns.
To stop navigation, select Options > Stop navigation.
Guides
To purchase and download different kinds of guides, such
as city and travel guides, for different cities to your device,
select Options > Extra services > Guides.
The guides provide information about attractions,
restaurants, hotels, and other points of interest. The guides
must be downloaded and purchased before use.
To browse a downloaded guide, on the My guides tab in
Guides, select a guide and a subcategory (if available).
To download a new guide to your device, in Guides, scroll
right to the Nearest guides or All guides tab, select the
desired guide, and press OK. To purchase the guide, scroll
left to the My guides tab, select the downloaded guide,
and enter your payment details. You can pay for the guides
through a credit card or have the amount charged to your
phone bill (if supported by your cellular network service
provider).
To confirm the purchase, select OK twice. To receive a
confirmation of the purchase through e-mail, enter your
name and e-mail address, and select OK.
78
Landmarks
Press
, and select Tools > Connectivity > Landmarks.
With Landmarks, you can save the position information of
specific locations in your device. You can sort the saved
locations into different categories, such as business, and
add other information, such as addresses, to them. You can
use your saved landmarks in compatible applications, such
as GPS data and Maps.
The coordinates in the GPS are expressed in degrees and
decimal degrees format using the international WGS-84
coordinate system.
To create a new landmark, select Options > New
landmark. To make a positioning request for the
coordinates of your current location, select Current
position. To enter the position information manually,
select Enter manually.
To edit or add information to a saved landmark (for
example, a street address), scroll to a landmark, and press
. Scroll to the desired field and enter the information.
To view the landmark on the map, select Options > Show
on map. To create a route to the location, select Options >
Navigate using map.
You can sort your landmarks into the preset categories,
and create new categories. To edit and create new
in Landmarks, and select
To add a landmark to a category, scroll to the landmark in
Landmarks, and select Options > Add to category. Scroll
to each category to which you want to add the landmark,
and select it.
To send one or several landmarks to a compatible device,
select Options > Send. Your received landmarks are placed
in the Inbox folder in Messaging.
GPS data
Press
, and select Tools > Connectivity > GPS data.
GPS data is designed to provide route guidance
information to a selected destination, position information
about your current location, and traveling information,
such as the approximate distance to the destination and
approximate duration of travel.
The coordinates in the GPS are expressed in degrees and
decimal degrees format using the international WGS-84
coordinate system.
To use GPS data, the GPS receiver of your device must
receive position information from at least three satellites
to calculate the coordinates of your location.
Route guidance
To use route guidance, select Navigation. Start the route
guidance outdoors. If started indoors, the GPS receiver may
not receive the necessary information from the satellites.
Route guidance uses a rotating compass on the device
display. A red ball shows the direction to the destination,
and the approximate distance to it is shown inside the
compass ring.
Positioning
landmark categories, press
Options > Edit categories.
Route guidance is designed to show the straightest route
and the shortest distance to the destination, measured in
a straight line. Any obstacles on the route, such as
buildings and natural obstacles, are ignored. Differences in
altitude are not taken into account when calculating the
distance. Route guidance is active only when you move.
To set your trip destination, select Options > Set
destination and a landmark as the destination, or enter
the latitude and longitude coordinates. Select Stop
navigation to clear the destination set for your trip.
Retrieve position information
To view the position information of your current location,
select Position. An estimate of the accuracy of the location
is shown on the display.
To save your current location as a landmark, select
Options > Save position.
79
Positioning
Landmarks are saved locations with more information, and
they can be used in other compatible applications and
transferred between compatible devices.
Trip meter
Select Trip distance > Options > Start to activate trip
distance calculation, and Stop to deactivate it. The
calculated values remain on the display. Use this feature
outdoors to receive a better GPS signal.
Select Reset to set the trip distance and time and average
and maximum speeds to zero, and to start a new
calculation. Select Restart to also set the odometer and
total time to zero.
The trip meter has limited accuracy, and rounding errors
may occur. Accuracy can also be affected by availability
and quality of GPS signals.
80
To personalise your device, select from the following:
• To use the standby display for fast access to your most
frequently used applications, see ‘Active standby
mode’, p. 84.
• To change the standby mode background image or
what is shown in the screen saver, see ‘Change the look
of your device’, p. 83.
• To customise the ringing tones, see ‘Profiles—set tones’,
p. 81 and ‘Add ringing tones for contacts’, p. 109.
• To change the shortcuts assigned for the different
presses of the scroll key and left and right selection
keys in the standby mode, see ‘Standby mode’, p. 120.
• To change the clock shown in the standby mode, press
, and select Applications > Clock > Options >
Settings > Clock type > Analogue or Digital.
• To change the welcome note to an image or animation,
press , and select Tools > Settings > General >
Personalisation > Display > Welcome note / logo.
• To change the main menu view, in the main menu,
select Options > Change Menu view > Grid or List.
• To use animated icons in your device, in the main menu,
select Options > Icon animation > On.
• To rearrange the main menu, in the main menu, select
Options > Move, Move to folder, or New folder. You
can move less used applications into folders and place
applications that you use more often into the main
menu.
Profiles—set tones
To set and customise the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press , and select Tools > Profiles.
Personalise your device
Personalise your device
To change the profile, select Tools > Profiles, a profile, and
Options > Activate. You can also change the profile by
pressing
in the standby mode. Scroll to the profile you
want to activate, and select OK.
Tip! To switch between the general and silent profiles,
press and hold
.
To modify a profile, press , and select Tools > Profiles.
Scroll to the profile, and select Options > Personalise.
Scroll to the setting you want to change, and press
to
open the choices. Tones stored on a compatible memory
card (if inserted) are indicated with
.
In the tones list, the Download sounds link (network
service) opens a list of bookmarks. You can select a
bookmark and start connection to a web page to download
more tones.
81
Personalise your device
If you want the caller’s name to be spoken when your
device rings, select Options > Personalise, and set Say
caller's name to On. The caller’s name must be saved in
Contacts.
applicable safety requirements when establishing and
using a wireless LAN connection. See ‘Wireless LAN’, p. 26.
You can also use Bluetooth connectivity while in the
Offline profile. See ‘Bluetooth connectivity’, p. 28.
To create a new profile, select Options > Create new.
To leave the Offline profile, press the power key, and select
another profile. The device re-enables wireless
transmissions (providing there is sufficient signal
strength).
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate the
Offline profile, the connection to the wireless network is
turned off, as indicated by
in the signal strength
indicator area. All wireless RF signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
When the Offline profile is active, you can use your device
without a (U)SIM card.
Important: In the offline profile you cannot make or
receive any calls, or use other features that require cellular
network coverage. Calls may still be possible to the official
emergency number programmed into your device. To make
calls, you must first activate the phone function by
changing profiles. If the device has been locked, enter the
lock code.
When you have activated the Offline profile, you can still
use the wireless LAN, for example, to read your e-mail or
browse on the internet. Remember to comply with any
82
3-D tones
Press , and select Tools > 3-D tones. With 3-D tones
you can enable three-dimensional sound effects for
ringing tones. Not all ringing tones support 3-D effects.
To enable the 3-D effects, select 3-D ringing tone
effects > On. To change the ringing tone, select Ringing
tone and the desired ringing tone.
To change the 3–D effect that is applied to the ringing
tone, select Sound trajectory and the desired effect. To
modify the effect, select from the following settings:
Trajectory speed—Scroll left or right to adjust the speed at
which sound moves from one direction to another. This
setting is not available for all ringing tones.
Reverberation—Select the type of echo.
To listen to the ringing tone with the 3–D effect, select
Options > Play tone.
If you enable the 3-D tones but do not select any 3-D
effect, stereo widening is applied to the ringing tone.
To adjust the ringing tone volume, select Tools >
Profiles > Options > Personalise > Ringing volume.
Change the look of your
device
To change the look of the display, such as the wallpaper
and icons, press , and select Tools > Settings >
General > Personalisation > Themes.
To change the theme that is used for all the applications in
your device, select Themes > General. To change the
theme of a certain application, in the main view, select an
application.
To preview a theme before activating it, select Options >
Preview. To activate the theme, select Options > Set. The
active theme is indicated by
.
The themes on a compatible memory card (if inserted) are
indicated by
. The themes on the memory card are not
available if the memory card is not inserted in the device.
If you want to use the themes saved in the memory card
without the memory card, save the themes in the device
memory first.
To change the layout of the main menu, select Themes >
Menu view.
Personalise your device
Doppler effect—Select On to have the ringing tone sound
higher when you are closer to your device, and lower when
you are farther away. When you get closer to the device,
the ringing tone appears to become higher, and lower
when you move away from it. This setting is not available
for all ringing tones and sound trajectories.
To open a browser connection and download more themes,
in General or Menu view, select Download themes
(network service).
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
To edit the wallpaper and power saver of the current
theme, select Themes > Wallpaper to change the
background image on the display for the active standby
mode or Power saver to change the power saver that
appears on the display for the active standby mode. See
also ‘Display’, p. 119 for power saver time-out setting.
83
Personalise your device
Active standby mode
The active standby display shows application shortcuts,
and events from applications such as calendar and player.
To switch the active standby on or off, press , and select
Tools > Settings > General > Personalisation > Standby
mode > Active standby.
Scroll to an application or
event, and press .
The standard scroll key
shortcuts available in the
standby mode cannot be
used when the active
standby mode is on.
To change the default
applications’ shortcuts,
press , and select
Tools > Settings >
General >
Personalisation >
Standby mode > Active standby apps..
Some shortcuts may be fixed, and you cannot change
them.
84
Clock
Press
, and select Applications > Clock. To set a new
non-repeated alarm, select Options > New quick alarm.
To view your active and inactive alarms, press
. To set a
new alarm, select Options > Set alarm. When an alarm is
active,
is shown.
To turn off the alarm, select Stop. To stop the alarm for 5
minutes, select Snooze.
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether you
want to activate the device for calls. Select No to switch
off the device or Yes to make and receive calls. Do not
select Yes when wireless phone use may cause
interference or danger.
To cancel an alarm, select Applications > Clock >
Options > Remove alarm.
To change clock settings, select Applications > Clock >
Options > Settings > Time or Date, Clock type, or Clock
alarm tone.
To allow the mobile phone network to update the time,
date, and time zone information to your device (network
service), select Network operator time > Auto-update.
World clock
Time management
Time management
To open the world clock view, select Clock, and press
twice. In the world clock view, you can view the time in
different cities. To add cities to the list, select Options >
Add city. You can add a maximum of 15 cities to the list.
To set your current city, scroll to a city, and select
Options > Set as current city. The city is displayed in the
clock main view, and the time in your device is changed
according to the city selected. Check that the time is
correct and matches your time zone.
Calendar
Press
, and select Applications > Calendar. To add a
new calendar entry, scroll to the desired date, select
Options > New entry and one of the following:
1 Meeting—to remind you of an appointment that has a
specific date and time
Memo—to write a general entry for a day
85
Time management
Anniversary—to remind you of birthdays or special
dates (entries are repeated every year)
To-do—to remind you of a task that needs doing by a
specific date
2 Fill in the fields. To set
an alarm, select
Alarm > On, and enter
the Alarm time and
Alarm date.
To add a description for
an entry, select
Options > Add
description.
3 To save the entry,
select Done.
Shortcut: In the day,
week, or month
calendar view, press
any key (
—
). An appointment entry opens, and
the characters you enter are added to Subject. In the
to-do view, a to-do note entry opens.
When the calendar alarms for a note, select Silence to turn
off the calendar alarm tone. The reminder text stays on the
screen. To end the calendar alarm, select Stop. To set the
alarm to snooze, select Snooze.
You can synchronise your calendar with a compatible PC
using Nokia Nseries PC Suite. When creating a calendar
entry, set the desired Synchronisation option.
Calendar views
Select Options > Settings to change the starting day of
the week or the view that is shown when you open the
calendar.
To go to a certain date, select Options > Go to date. To
jump to today, press
.
To switch between the month view, week view, day view,
and to-do view, press
.
To send a calendar note to a compatible device, select
Options > Send.
If the other device is not compatible with Coordinated
Universal Time (UTC), the time information of received
calendar entries may not be displayed correctly.
To modify the calendar, select Options > Settings >
Calendar alarm tone, Default view, Week starts on, and
Week view title.
Manage your calendar entries
To delete more than one event at a time, go to the month
view, and select Options > Delete entry > Before date or
All entries.
86
Time management
To mark a task as completed, scroll to it in the to-do view,
and select Options > Mark as done.
87
Messaging
Messaging
Press
, and select Messaging (network service).
Only devices that have compatible features can receive
and display multimedia messages. The appearance of a
message may vary depending on the receiving device.
To create a new message, select New message.
Messaging contains the following folders:
Inbox—Received messages, except e-mail and cell
broadcast messages, are stored here. E-mail messages are
stored in the Mailbox.
My folders—Organise your messages into folders.
Tip! To avoid rewriting messages that you send often,
use texts in the templates folder. You can also create
and save your own templates.
Mailbox—Connect to your remote mailbox to retrieve
your new e-mail messages or view your previously
retrieved e-mail messages offline. See ‘E-mail’, p. 95.
Drafts—Draft messages that have not been sent are
stored here.
Sent—The last messages that have been sent,
excluding messages sent using Bluetooth connectivity or
88
infrared, are stored here. To change the number of
messages to be saved, see ‘Other settings’, p. 97.
Outbox—Messages waiting to be sent are temporarily
stored in the outbox, for example, when your device is
outside network coverage.
Reports—You can request the network to send you a
delivery report of the text messages and multimedia
messages you have sent (network service).
To enter and send service requests (also known as USSD
commands), such as activation commands for network
services, to your service provider, select Options > Service
command in the main view of Messaging.
Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions, from your service provider. For available topics
and relevant topic numbers, contact your service provider.
In the main view of Messaging, select Options > Cell
broadcast.
Cell broadcast messages cannot be received in UMTS
networks. A packet data connection may prevent cell
broadcast reception.
ABC, abc, and Abc indicate the selected character mode.
123 indicates the number mode.
To switch between the letter and number mode, press and
hold
. To switch between the different character
modes, press
.
To insert a number in the letter mode, press and hold the
desired number key.
is displayed when you write text using traditional
text input and
when using predictive text input.
With predictive text, you can enter any letter with a single
keypress. Predictive text input is based on a built-in
dictionary to which you can add new words.
To activate predictive text input, press
Activate predictive text.
, and select
Tip! To turn predictive text input on or off, quickly
press
twice.
Edit text and lists
• To mark an item in a list, scroll to it, and press
and
at the same time.
• To mark multiple items in a list, press and hold
while you press
or . To end the selection, release
, then release
.
,
press
or
to highlight text. To copy the text to
clipboard, while still holding
, select Copy. To insert
the text into a document, press and hold
, and
select Paste.
Messaging
• To copy and paste text, while pressing and holding
Write text
Write and send messages
Before you can create a multimedia message or write an
e-mail, you must have the correct connection settings in
place. See ‘E-mail settings’, p. 91 and ‘E-mail’, p. 95.
The wireless network may limit the size of MMS messages.
If the inserted picture exceeds this limit, the device may
make it smaller so that it can be sent by MMS.
1 Select New message and from the following:
Text message—to send a text message
Multimedia message—to send a multimedia message
(MMS)
Audio message—to send an audio message (a
multimedia message that includes one sound clip)
E-mail—to send an e-mail
2 In the To field, press to select recipients or groups
from contacts, or enter the recipient’s phone number or
e-mail address. To add a semicolon (;) that separates
the recipients, press
. You can also copy and paste
the number or address from the clipboard.
89
Messaging
3 In the Subject field, enter the subject of a multimedia
4
5
6
7
8
90
message or e-mail. To change the fields that are visible,
select Options > Address fields.
In the message field, write
the message. To insert a
template, select
Options > Insert or Insert
object > Template.
To add a media object to a
multimedia message,
select Options > Insert
object > Image, Sound
clip, or Video clip.
To take a new picture or
record sound or video for
a multimedia message,
select Insert new > Image, Sound clip, or Video clip.
To insert a new slide to the message, select Slide.
To see what the multimedia message looks like, select
Options > Preview.
To add an attachment to an e-mail, select Options >
Insert > Image, Sound clip, Video clip, Note, or Other
for other file types. E-mail attachments are indicated
by .
To send the message, select Options > Send, or press
.
Note: Your device may indicate that your message
was sent to the message center number programmed
into your device. Your device may not indicate whether
the message is received at the intended destination. For
more details about messaging services, contact your
service provider.
Your device supports the sending of text messages beyond
the character limit for a single message. Longer messages
are sent as a series of two or more messages. Your service
provider may charge accordingly. Characters that use
accents or other marks, and characters from some
language options, take up more space, limiting the number
of characters that can be sent in a single message.
You may not be able to send video clips that are saved in
the .mp4 format or that exceed the size limit of the
wireless network in a multimedia message.
Tip! You can combine images, video, sound, and text
to a presentation and send it in a multimedia message.
Start to create a multimedia message, and select
Options > Create presentation. The option is shown
only if MMS creation mode is set to Guided or Free.
See ‘Multimedia messages’, p. 94.
Inbox—receive messages
In the Inbox folder,
indicates an unread text message,
an unread multimedia message,
an unread audio
message,
data received through infrared, and
data
received through Bluetooth connectivity.
Multimedia messages
Important: Exercise caution when opening
messages. Multimedia message objects may contain
malicious software or otherwise be harmful to your device
or PC.
You may receive a notification that a multimedia message
is waiting in the multimedia message center. To start a
packet data connection to retrieve the message to your
device, select Options > Retrieve.
When you open a multimedia message ( ), you may see
an image and a message.
is shown if sound is
included, or
if video is included. To play the sound or
the video, select the indicator.
To see the media objects that have been included in the
multimedia message, select Options > Objects.
If the message includes a multimedia presentation,
is
displayed. To play the presentation, select the indicator.
Data and settings
Your device can receive many kinds of messages that
contain data, such as business cards, ringing tones,
operator logos, calendar entries, and e-mail notifications.
You may also receive settings from your service provider or
company information management department in a
configuration message.
Messaging
When you receive a message,
and 1 new message
are shown in the standby mode. To open the message,
select Show. To open a message in Inbox, scroll to it, and
press . To reply to a received message, select Options >
Reply.
To save the data from the message, select Options and the
corresponding option.
Web service messages
Web service messages are notifications (for example, news
headlines) and may contain a text message or a link. For
availability and subscription, contact your service provider.
Mailbox
E-mail settings
Tip! Use Settings wizard to define your mailbox
settings. Press
, and select Tools > Utilities > Sett.
wizard.
To use e-mail, you must have a valid internet access point
(IAP) in the device and define your e-mail settings
correctly. See ‘Access points’, p. 127.
91
Messaging
If you select Mailbox in the Messaging main view and
have not set up your e-mail account, you are prompted to
do so. To start creating the e-mail settings with the
mailbox guide, select Start. See also ‘E-mail’, p. 95.
Retrieve e-mail messages
You must have a separate e-mail account. Follow the
instructions given by your remote mailbox and internet
service provider (ISP).
Important: Exercise caution when opening
messages. E-mail messages may contain malicious
software or otherwise be harmful to your device or PC.
When you create a new mailbox, the name you give to the
mailbox replaces Mailbox in the Messaging main view.
You can have up to six mailboxes.
1 When you have an open connection to a remote
Open the mailbox
When you open the mailbox, the device asks if you want to
connect to the mailbox (Connect to mailbox?).
To connect to your mailbox and retrieve new e-mail
headings or messages, select Yes. When you view
messages online, you are continuously connected to a
remote mailbox using a data connection.
To view previously retrieved e-mail messages offline, select
No.
To create a new e-mail message, select New message > Email in the messaging main view or Options > Create
message > E-mail in your mailbox. See ‘Write and send
messages’, p. 89.
92
If you are offline, select Options > Connect to start a
connection to the remote mailbox.
mailbox, select Options > Retrieve e-mail and one of
the following:
New—to retrieve all new messages
Selected—to retrieve only the messages that have been
marked
All—to retrieve all messages from the mailbox
To stop retrieving messages, select Cancel.
2 If you want to close the connection and view the e-mail
messages offline, select Options > Disconnect.
3 To open an e-mail message, press . If the e-mail
message has not been retrieved and you are offline, you
are asked if you want to retrieve this message from the
mailbox.
To view e-mail attachments, open the message, and select
the attachment field indicated by . If the attachment
has a dimmed indicator, it has not been retrieved to the
device; select Options > Retrieve.
To retrieve messages automatically, select Options > Email settings > Automatic retrieval. For more
information, see ‘Automatic retrieval’, p. 96.
To cancel deleting an e-mail from the device and server,
scroll to an e-mail that has been marked to be deleted
during the next connection ( ), and select Options >
Restore.
Setting the device to retrieve e-mail automatically may
involve the transmission of large amounts of data through
your service provider's network. Contact your service
provider for information about data transmission charges.
Disconnect from the mailbox
Delete e-mail messages
View messages on a SIM card
To delete the contents of an e-mail message from the
device while still retaining it in the remote mailbox, select
Options > Delete. In Delete message from:, select Phone
only.
Before you can view SIM messages, you must copy them to
a folder in your device.
1 In the Messaging main view, select Options > SIM
messages.
2 Select Options > Mark/Unmark > Mark or Mark all to
mark messages.
3 Select Options > Copy. A list of folders opens.
4 To start copying, select a folder and OK. To view the
messages, open the folder.
The device mirrors the e-mail headings in the remote
mailbox. Although you delete the message content, the
e-mail heading stays in your device. If you want to remove
the heading as well, you must first delete the e-mail
message from your remote mailbox, and then make a
connection from your device to the remote mailbox again
to update the status.
To delete an e-mail from the device and the remote
mailbox, select Options > Delete. In Delete message
from:, select Phone and server.
Messaging
Retrieve e-mail messages automatically
When you are online, to end the data connection to the
remote mailbox, select Options > Disconnect.
Messaging settings
Fill in all fields marked with Must be defined or with a red
asterisk. Follow the instructions given by your service
provider. You may also obtain settings from your service
provider in a configuration message.
93
Messaging
Some or all message centers or access points may be preset
for your device by your service provider, and you may not
be able to change, create, edit, or remove them.
Reply via same centre—Select whether you want the reply
message to be sent using the same text message center
number (network service).
Text messages
Multimedia messages
Press
, and select Messaging > Options > Settings >
Text message and from the following:
Press
, and select Messaging > Options > Settings >
Multimedia message and from the following:
Message centres—View a list of all text message centers
that have been defined.
Image size—Define the size of the image in a multimedia
message.
Character encoding— To use character conversion to
another encoding system when available, select Reduced
support.
MMS creation mode —If you select Guided, the device
informs you if you try to send a message that may not be
supported by the recipient. If you select Restricted, the
device prevents you from sending messages that may not
be supported. To include content in your messages without
notifications, select Free.
Message centre in use—Select which message center is
used to deliver text messages.
Receive report—Select whether the network sends
delivery reports on your messages (network service).
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the message cannot be sent within the validity
period, the message is deleted from the message center.
Message sent as—Contact your service provider to learn if
your message center is able to convert text messages into
these other formats.
Preferred connection—Select the connection to be used.
94
Access point in use—Select which access point is used as
the preferred connection.
Multimedia retrieval—Select how you want to receive
messages. To receive messages automatically in your home
cellular network, select Auto in home netw.. Outside your
home cellular network, you receive a notification that
there is a message to retrieve in the multimedia message
center.
Outside your home cellular network, sending and receiving
multimedia messages may cost you more.
Allow anon. msgs.—Select whether you want to reject
messages from an anonymous sender.
Receive adverts—Define whether you want to receive
multimedia message advertisements.
Receive report—Select whether you want the status of the
sent message to be shown in the log (network service).
Deny report sending—Select whether you want to deny
your device sending delivery reports of received messages.
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the message cannot be sent within the validity
period, the message is deleted from the message center.
E-mail
Press
, and select Messaging > Options > Settings >
E-mail.
To select which mailbox you want to use for sending
e-mail, select Mailbox in use and a mailbox.
Select Mailboxes and a mailbox to change the following
settings: Connection settings, User settings, Retrieval
settings, and Automatic retrieval.
To remove a mailbox and its messages from your device,
scroll to it, and press .
Messaging
If you select Multimedia retrieval > Always automatic,
your device automatically makes an active packet data
connection to retrieve the message both in and outside
your home cellular network.
To create a new mailbox, select Options > New mailbox.
Connection settings
To edit the settings for the e-mail you receive, select
Incoming e-mail and from the following:
User name—Enter your user name, given to you by your
service provider.
Password—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Incoming mail server—Enter the IP address or host name
of the mail server that receives your e-mail.
Access point in use—Select an internet access point (IAP).
See ‘Access points’, p. 127.
Mailbox name—Enter a name for the mailbox.
Mailbox type—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting cannot be changed.
95
Messaging
Security (ports)—Select the security option used to secure
the connection to the remote mailbox.
During next conn., e-mail is sent when the connection to
the remote mailbox is available.
Port—Define a port for the connection.
Send copy to self—Select whether you want to send a
copy of the e-mail to your own mailbox.
APOP secure login (for POP3 only)—Use with the POP3
protocol to encrypt the sending of passwords to the
remote e-mail server while connecting to the mailbox.
To edit the settings for the e-mail you send, select
Outgoing e-mail and from the following:
My e-mail address—Enter the e-mail address given to you
by your service provider.
Outgoing mail server—Enter the IP address or host name
of the mail server that sends your e-mail. You may only be
able to use the outgoing server of your service provider.
Contact your service provider for more information.
The settings for User name, Password, Access point in
use, Security (ports), and Port are similar to the ones in
Incoming e-mail.
User settings
My name—Enter your own name. Your name replaces your
e-mail address in the recipient’s device when the
recipient’s device supports this function.
Send message—Define how e-mail is sent from your
device. Select Immediately for the device to connect to the
mailbox when you select Send message. If you select
96
Include signature—Select whether you want to attach a
signature to your e-mail messages.
New e-mail alerts—Select whether you want to receive
the new e-mail indications (a tone, a note, and a mail
indicator) when new mail is received.
Retrieval settings
E-mail to retrieve—Define which parts of the e-mail are
retrieved: Headers only, Partially (kB) (POP3), or Msgs. &
attachs. (POP3).
Retrieval amount—Define how many new e-mail
messages are retrieved to the mailbox.
IMAP4 folder path (for IMAP4 only)—Define the folder
path for folders to be subscribed.
Folder subscriptions (for IMAP4 only)—Subscribe to other
folders in the remote mailbox and retrieve content from
those folders.
Automatic retrieval
E-mail notifications—To automatically retrieve the
headings to your device when you receive new e-mail in
Options > Settings > Cell broadcast and from the
following:
E-mail retrieval—To automatically retrieve the headings
of new e-mail messages from your remote mailbox at
defined times, select Enabled or Only in home netw..
Define when and how often the messages are retrieved.
Reception—Select whether you want to receive cell
broadcast messages.
E-mail notifications and E-mail retrieval cannot be
active at the same time.
Topic detection—Select whether the device automatically
searches for new topic numbers, and saves the new
numbers without a name to the topic list.
Setting the device to retrieve e-mail automatically may
involve the transmission of large amounts of data through
your service provider's network. Contact your service
provider for information about data transmission charges.
Web service messages
Press
, and select Messaging > Options > Settings >
Service message. Select whether you want to receive
service messages. If you want to set the device to
automatically activate the browser and start a network
connection to retrieve content when you receive a service
message, select Download messages > Automatically.
Cell broadcast
Check the available topics and related topic numbers with
your service provider. Press
, and select Messaging >
Language—Select the languages in which you want to
receive messages: All, Selected, or Other.
Messaging
your remote mailbox, select Auto-update or Only in home
netw..
Other settings
Press
, and select Messaging > Options > Settings >
Other and from the following:
Save sent messages—Select whether you want to save a
copy of the text messages, multimedia messages, or e-mail
that you send to the Sent folder.
Number of saved msgs.—Define how many sent messages
are saved to the Sent folder at a time. When the limit is
reached, the oldest message is deleted.
Memory in use—If a compatible memory card is inserted
in the device, select the memory where you want to save
your messages: Phone memory or Memory card.
97
Make calls
Make calls
Voice calls
1 In the standby mode, enter the phone number,
including the area code. To remove a number, press .
For international calls, press
twice for the +
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2 Press
to call the number.
3 Press
to end the call (or to cancel the call attempt).
Pressing
always ends a call, even if another
application is active. Closing the slide does not end an
active voice call.
To adjust the volume during a call, use the volume key on
the side of your device. You can also use the scroll key. If
you have set the volume to Mute, select Unmute first.
To make a call from Contacts, press
, and select
Contacts. Scroll to the desired name, or enter the first
letters of the name to the search field. Matching contacts
are listed. To call, press
.
You must copy the contacts from your SIM card to
Contacts before you can make a call this way. See ‘Copy
contacts’, p. 108.
98
To call a recently dialled number in the standby mode,
press
. Scroll to the number, and press
.
To send an image or a video clip in a multimedia message
to the other participant of the call, select Options > Send
MMS (in UMTS networks only). You can edit the message
and change the recipient before sending. Press
to send
the file to a compatible device (network service).
To put an active voice call on hold while answering another
incoming call, select Options > Hold. To switch between
the active and the held call, select Options > Swap. To
connect the active and held calls and drop yourself from
the line, select Options > Transfer.
To send DTMF tone strings (for example, a password),
select Options > Send DTMF. Enter the DTMF string or
search for it in Contacts. To enter a wait character (w) or
a pause character (p), press
repeatedly. Select OK to
send the tone. You can add DTMF tones to the Phone
number or DTMF fields in a contact card.
Tip! When you have only one active voice call, to put
the call on hold, press
. To activate the call, press
again.
During an active call, to route the sound from the handset
to the loudspeaker, select Options > Activate
To end an active call and replace it by answering the
waiting call, select Options > Replace.
If you have several calls active, to end them all, select
Options > End all calls.
Many of the options that you can use during a voice call
are network services.
Voice and video mailboxes
To call your voice or video mailbox (network services, video
mailbox available only in the UMTS network), press and
hold
in the standby mode, and select Voice mailbox
or Video mailbox. See also ‘Call divert’, p. 125, and ‘Video
calls’, p. 100.
To change the phone number of your voice or video
mailbox, press
, and select Tools > Utilities > Call
mailbox, a mailbox, and Options > Change number. Enter
the number (obtained from your wireless service provider),
and select OK.
Make a conference call
1 Make a call to the first participant.
2 To make a call to another participant, select Options >
New call. The first call is automatically put on hold.
3 When the new call is answered, to join the first
participant in the conference call, select Options >
Conference.
To add a new person to the call, repeat step 2, and
select Options > Conference > Add to conference.
Your device supports conference calls between a
maximum of six participants, including yourself.
To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant, and select Private. The conference
call is put on hold on your device. The other
participants can still continue the conference call.
After you finish the private conversation, select
Options > Add to conference to return to the
conference call.
To drop a participant, select Options > Conference >
Drop participant, scroll to the participant, and select
Drop.
4 To end the active conference call, press
.
Make calls
loudspeaker. If you have attached a compatible headset
with Bluetooth connectivity, to route the sound to the
headset, select Options > Activate handsfree. To switch
back to the handset, select Options > Activate handset.
Speed dial a phone number
To activate speed dialling, press
, and select Tools >
Settings > Phone > Call > Speed dialling > On.
To assign a phone number to one of the speed dialling keys
(
—
), press
, and select Tools > Utilities > Speed
99
Make calls
dial. Scroll to the key to which you want to assign the
phone number, and select Options > Assign.
is
reserved for the voice or video mailbox, and
for
starting the web browser.
To call in the standby mode, press the speed dial key and
.
Voice dialling
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice, so the user does not record voice tags in
advance. Instead, the device creates a voice tag for the
entries in contacts, and compares the spoken voice tag to
it. The voice recognition in the device adapts to the main
user’s voice to recognise the voice commands better.
The voice tag for a contact is the name or nickname that is
saved on the contact card. To listen to the synthesised
voice tag, open a contact card, and select Options > Play
voice tag.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialling in all circumstances.
When you use voice dialling, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
1 To start voice dialling, in the standby mode, press and
hold the right selection key. If a compatible headset
with the headset key is attached, press and hold the
headset key to start voice dialling.
2 A short tone is played, and Speak now is displayed. Say
clearly the name or nickname that is saved on the
contact card.
3 The device plays a synthesised voice tag for the
recognised contact in the selected device language,
and displays the name and number. After a timeout of
2.5 seconds, the device dials the number.
If the recognised contact was not correct, select Next
to view a list of other matches or Quit to cancel voice
dialling.
If several numbers are saved under the name, the device
selects the default number if it has been set. Otherwise the
device selects the first available number of the following:
Mobile, Mobile (home), Mobile (business), Telephone,
Tel. (home), and Tel. (business).
Video calls
When you make a video call (network service), you can see
a real-time, two-way video between you and the recipient
100
1 To start a video call, enter the phone number in the
To be able to make a video call, you must have a USIM card
and be in the coverage of a UMTS network. For availability
of and subscription to video call services, contact your
wireless service provider.
The secondary camera on the front is used by default for
video calls. If the lens cover is open, the main camera is
used instead. Starting a video call may take a while.
Waiting for video image is shown. If the call is not
successful (for example, video calls are not supported by
the network, or the receiving device is not compatible), you
are asked if you want to try a normal call or send a text or
multimedia message instead.
A video call can only be made between two parties. The
video call can be made to a compatible mobile device or an
ISDN client. Video calls cannot be made while another
voice, video, or data call is active.
Icons:
You are not receiving
video (the recipient is not
sending video or the
network is not
transmitting it).
You have denied
video sending from your
device. To send a still
image instead, see ‘Call’,
p. 124.
Even if you denied video
sending during a video
call, the call is still charged as a video call. Check the
pricing with your service provider.
standby mode, or select Contacts and a contact.
2 Select Options > Call > Video call.
Make calls
of the call. The live video image, or video image captured
by the camera in your device is shown to the video call
recipient.
The video call is active when you see two video images, and
hear the sound through the loudspeaker. The call recipient
may deny video sending (
), in which case you only hear
the sound and may see a still image or a grey background
graphic.
To change between showing video or hearing only sound,
select Options > Enable or Disable > Sending video,
Sending audio or Sending aud. & video.
To zoom in or out your own image, press
or
.
To switch the places of the sent video images on the
display, select Options > Change image order.
To route the audio to a compatible headset with Bluetooth
connectivity attached to your device, select Options >
Activate handsfree. To route the audio back to the
101
Make calls
loudspeaker of your device, select Options > Activate
handset.
information on the service and network availability, and
fees associated with using this service.
To adjust the volume during a video call, use the volume
key on the side of the device.
The loudspeaker is active when you activate Video
sharing. If you do not want to use the loudspeaker for the
voice call while you share video, you can also use a
compatible headset.
To use Video sharing you must do the following:
• Ensure that your device is set up for person-to-person
connections. See ‘Settings’, p. 102.
• Ensure you have an active UMTS connection and are
within UMTS network coverage. See ‘Settings’, p. 102.
If you start the sharing session while you are within
UMTS network coverage and a handover to GSM
occurs, the sharing session is discontinued, but your
voice call continues. You cannot start Video sharing if
you are not within UMTS network coverage.
• Ensure that both the sender and recipient are
registered to the UMTS network. If you invite someone
to a sharing session and the recipient’s device is not
within UMTS network coverage, or does not have Video
sharing installed or person-to-person connections set
up, the recipient does not know that you are sending an
invitation. You receive an error message that the
recipient cannot accept the invitation.
Video sharing requirements
Settings
Because Video sharing requires a UMTS connection, your
ability to use Video sharing depends on the UMTS network
availability. Contact your service provider for more
Person-to-person connection settings
To use the main camera for sending video, open the lens
cover in the back. To switch to the secondary camera,
select Options > Use secondary camera. To switch back to
the main camera, select Options > Use main camera.
To end the video call, press
.
Video sharing
Use Video sharing (network service) to send live video or a
video clip from your mobile device to another compatible
mobile device during a voice call.
102
A person-to-person connection is also known as a Session
Initiation Protocol (SIP) connection. The SIP profile settings
Ask your service provider for the SIP profile settings, and
save them in your device. Your service provider may send
you the settings over the air or give you a list of the needed
parameters.
If you know a recipient’s SIP address, you can enter it on
the person’s contact card. Open Contacts from your device
main menu, and open the contact card (or start a new card
for that person). Select Options > Add detail > SIP or
Share view. Enter the SIP address in the format
username@domainname (you can use an IP address
instead of a domain name).
If you do not know a SIP address for the contact, you can
also use the phone number of the recipient including the
country code, for example +358, to share video (if
supported by the wireless service provider).
UMTS connection settings
To set up your UMTS connection, do the following:
• Contact your service provider to establish an
agreement for you to use the UMTS network.
• Ensure that your device UMTS access point connection
settings are configured properly. For help, see
‘Connection’, p. 126.
Share live video or video clip
1 When a voice call is active, select Options > Share
video > Live video, and open the lens cover in the back.
To share a video clip, select Options > Share video >
Recorded clip. A list of video clips saved on the device
memory or compatible memory card opens. Select a
clip you want to share. To preview the clip, select
Options > Play.
2 If you share live video, your device sends the invitation
to the SIP address you have added to the contact card
of the recipient.
If you share a video clip, select Options > Invite. You
may need to convert the video clip into a suitable
format to be able to share it. Clip must be converted
for sharing. Continue? appears. Select OK.
If the contact information of the recipient is saved in
Contacts, and the contact has several SIP addresses or
phone numbers including the country code, select the
desired address or number. If the SIP address or phone
number of the recipient is not available, enter the SIP
address or the phone number of the recipient including
the country code, and select OK to send the invitation.
3 Sharing begins automatically when the recipient
accepts the invitation.
4 Select Pause to pause the sharing session. Select
Continue to resume sharing. To fast forward or rewind
Make calls
must be configured in your device before you can use
Video sharing.
103
Make calls
the video clip, press
or . To play the clip again,
press Play.
5 To end the sharing session, select Stop. To end the voice
call, press
. Video sharing also ends if the active
voice call ends.
To save the live video you shared, select Save to accept the
Save shared video clip? query. The shared video is saved
in the Images & videos folder in Gallery.
If you access other applications while you are sharing a
video clip, the sharing is paused. To return to the video
sharing view and continue sharing, in the active standby
mode, select Options > Continue. See ‘Active standby
mode’, p. 84.
Accept an invitation
When someone sends you a share invitation, an invitation
message is displayed showing the sender’s name or SIP
address. If your device is not set to Silent, it rings when
you receive an invitation.
If someone sends you a share invitation and you are not
within UMTS network coverage, you will not know that
you received an invitation.
When you receive an invitation, select from the following:
Accept—to activate the sharing session.
104
Reject—to decline the invitation. The sender receives a
message that you rejected the invitation. You can also
press the end key to decline the sharing session and
disconnect the voice call.
When you are receiving a video clip, to mute the sound of
the clip, select Mute.
To end video sharing, select Stop. Video sharing also ends
if the active voice call ends.
Answer or decline a call
To answer the call, press
, or open the slide.
To mute the ringing tone when a call comes in, select
Silence.
If you do not want to answer a call, press
. If you have
activated the Call divert > If busy function to divert calls,
declining an incoming call also diverts the call. See ‘Call
divert’, p. 125.
When you select Silence to mute the ringing tone of the
incoming call, you can send a text message without
rejecting the call informing the caller that you cannot
answer the call. Select Options > Send text message. To
set up this option and write a standard text message, see
‘Call’, p. 124.
Log
When a video call arrives,
To monitor the phone numbers of missed, received, and
dialled voice calls, press
, and select Tools > Log >
Recent calls. The device registers missed and received calls
only if the network supports these functions, the device is
switched on, and within the network service area.
is displayed.
Press
to answer the video call. Allow video image to
be sent to caller? is displayed. To start sending live video
image, select Yes.
If you do not activate the video call, video sending is not
activated, and you only hear the sound of the caller. A grey
screen replaces the video image. To replace the grey screen
with a still image captured by the camera in your device,
see ‘Call’, Image in video call, p. 124.
To end the video call, press
.
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press .
Call duration
Call waiting
You can answer a call while you have another call in
progress if you have activated Call waiting in Tools >
Settings > Phone > Call > Call waiting (network service).
To answer the waiting call, press
on hold.
Make calls
Answer or reject a video call
. The first call is put
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select Options >
Transfer. To end the active call, press
. To end both
calls, select Options > End all calls.
To monitor the approximate duration of your incoming and
outgoing calls, press
, and select Tools > Log > Call
duration.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select Options > Clear
timers. For this you need the lock code. See ‘Phone and
SIM card’, p. 121.
105
Make calls
Packet data
To check the amount of data sent and received during
packet data connections, press
, and select Tools >
Log > Packet data. For example, you may be charged for
your packet data connections by the amount of data sent
and received.
Monitor all communication events
Icons in Log are as follows:
Incoming
Outgoing
Missed communication events
To monitor all voice calls, text messages, or data and
wireless LAN connections registered by the device, press
, select Tools > Log, and press
to open the general
log.
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging center, or web pages are shown as
packet data connections.
To add an unknown phone number from Log to your
contacts, select Options > Save to Contacts.
To filter the log, select Options > Filter and a filter.
106
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select Options >
Clear log. Select Yes to confirm. To remove a single event
from the log, press .
To set the log duration, select Options > Settings > Log
duration. If you select No log, all the log contents, recent
calls register, and messaging delivery reports are
permanently deleted.
Tip! In the details view, you can copy a phone number
to the clipboard, and paste it to a text message, for
example. Select Options > Copy number.
To view from the packet data counter how much data is
transferred and how long a certain packet data connection
lasts, scroll to an incoming or outgoing event indicated by
Pack., and select Options > View details.
Press
, and select Contacts. In Contacts you can save
and update contact information, such as phone numbers,
home addresses, or e-mail addresses of your contacts. You
can add a personal ringing tone or a thumbnail image to a
contact card. You can also create contact groups, which
allow you to send text messages or e-mail to many
recipients at the same time. You can add received contact
information (business cards) to contacts. See ‘Data and
settings’, p. 91. Contact information can only be sent to or
received from compatible devices.
To view the amount of contacts, groups, and the available
memory in Contacts, select Options > Contacts info.
Save and edit names and numbers
1 Select Options > New contact.
2 Fill in the fields that you want, and select Done.
To edit contact cards in Contacts, scroll to the contact
card you want to edit, and select Options > Edit. You can
also search for the desired contact by entering the first
letters of the name to the search field. A list of the
contacts starting with the letters appear on the display.
Tip! To add and edit contact cards, you can also use
Nokia Contacts Editor available in Nokia Nseries PC
Suite.
To attach a small thumbnail image to a contact card, open
the contact card, and select Options > Edit > Options >
Add thumbnail. The thumbnail image is shown when the
contact calls.
Contacts (Phonebook)
Contacts (Phonebook)
To listen to the voice tag assigned to the contact, select a
contact card and Options > Play voice tag. See ‘Voice
dialling’, p. 100.
To send contact information, select the card you want to
send and Options > Send business card > Via text
message, Via multimedia, Via Bluetooth, or Via infrared.
See ‘Messaging’, p. 88 and ‘Send data using Bluetooth
connectivity’, p. 30.
Tip! To print contact cards on a compatible Basic Print
Profile (BPP) equipped printer with Bluetooth
connectivity (such as HP Deskjet 450 Mobile Printer or
HP Photosmart 8150), select Options > Print.
To add a contact to a group, select Options > Add to
group: (shown only if you have created a group). See
‘Create contact groups’, p. 109.
107
Contacts (Phonebook)
To check to which groups a contact belongs, select the
contact and Options > Belongs to groups.
contacts > SIM directory, the names you want to copy
and Options > Copy to Contacts.
To delete a contact card in Contacts, select a card, and
press . To delete several contact cards at the same time,
press
and
to mark the contacts, and press to
delete.
To copy contacts to your SIM card, in Contacts, select the
names you want to copy and Options > Copy to SIM
directory, or Options > Copy > To SIM directory. Only the
contact card fields supported by your SIM card are copied.
Default numbers and addresses
You can assign default numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address. The default
number is also used in voice dialling.
1 In Contacts, select a contact.
2 Select Options > Defaults.
3 Select a default to which you want to add a number or
an address, and select Assign.
4 Select a number or an address you want to set as a
default.
The default number or address is underlined in the contact
card.
Copy contacts
To copy names and numbers from a SIM card to your
device, press
, and select Contacts > Options > SIM
108
Tip! You can synchronise your contacts to a
compatible PC with Nokia Nseries PC Suite.
SIM directory and other SIM services
For availability and information on using SIM card services,
contact your SIM card vendor. This may be the service
provider or other vendor.
Press
, and select Contacts > Options > SIM
contacts > SIM directory to see the names and numbers
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
To view the list of fixed dialling numbers, select Options >
SIM contacts > Fixed dial contacts. This setting is only
shown if supported by your SIM card.
To restrict calls from your device to selected phone
numbers, select Options > Activate fixed dialling. You
need your PIN2 code to activate and deactivate fixed
dialling or edit your fixed dialling contacts. Contact your
service provider if you do not have the code. To add new
When you use Fixed dialling, packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message center
number and the recipient’s phone number must be
included on the fixed dialling list.
When fixed dialling is activated, calls may be possible to
the official emergency number programmed into your
device.
Add ringing tones for contacts
To define a ringing tone for a contact or a contact group,
do the following:
1 Press to open a contact card or go to the groups list,
and select a contact group.
2 Select Options > Ringing tone. A list of ringing tones
opens.
3 Select the ringing tone you want to use for the
individual contact or the selected group. You can also
use a video clip as a ringing tone.
To remove the ringing tone, select Default tone from the
list of ringing tones.
Create contact groups
1 In Contacts, press
to open the groups list.
2 Select Options > New group.
3 Write a name for the group or use the default name
Group , and select OK.
4 Select the group, and Options > Add members.
5 Scroll to a contact, and press to mark it. To add
Contacts (Phonebook)
numbers to the fixed dialling list, select Options > New
SIM contact. You need the PIN2 code for these functions.
multiple members at a time, repeat this action on all
the contacts you want to add.
6 Select OK to add the contacts to the group.
To rename a group, select Options > Rename, enter the
new name, and select OK.
Remove members from a group
1 In the groups list, select the group you want to modify.
2 Scroll to the contact, and select Options > Remove
from group.
3 Select Yes to remove the contact from the group.
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your device recognises it).
109
Office
Office
Quickoffice
With Quickoffice, you can view .doc, .xls, .ppt, and .txt
documents. All file formats or features are not supported.
Apple Macintosh is not supported.
See also ‘More information’, p. 111.
To use the Quickoffice applications, press
, and select
Applications > Office > Quickoffice. A list of files in the
.doc, .xls, .ppt, and .txt file formats saved on your device
and on a compatible memory card (if inserted) opens.
Quicksheet
To open Quickword, Quicksheet, Quickpoint, or
Quickmanager, press
to reach the desired view.
Quicksheet supports the viewing of spreadsheet files
saved in .xls format created with Microsoft Excel 97, 2000,
XP, or 2003. Not all variations or features of the mentioned
file formats are supported.
Quickword
With Quicksheet, you can view native Microsoft Excel files
with your device.
With Quickword, you can view native Microsoft Word
documents with your device.
To open a spreadsheet, press
, and select
Applications > Office > Quickoffice > Quicksheet and
the spreadsheet.
Quickword supports the viewing of documents saved in
.doc and .txt formats created with Microsoft Word 97,
2000, XP, and 2003. Not all variations or features of the
mentioned file formats are supported.
To upgrade to a version of Quicksheet that supports
editing, open a spreadsheet and select Options > Upgrade
to edit. The upgrade is chargeable.
To open a document, press
, and select Applications >
Office > Quickoffice > Quickword and the document.
110
To upgrade to a version of Quickword that supports
editing, open a document and select Options > Upgrade
to edit. The upgrade is chargeable.
See also ‘More information’, p. 111.
More information
With Quickpoint, you can view native Microsoft
PowerPoint presentations with your device.
If you experience problems with Quickword, Quicksheet,
Quickpoint, or Quickmanager, visit www.quickoffice.com
for more information. Support is also available by sending
an e-mail to [email protected].
Quickpoint supports the viewing of presentations saved in
.ppt format created with Microsoft PowerPoint 2000, XP,
and 2003. Not all variations or features of the mentioned
file formats are supported.
Notes
To open a presentation, press
, and select
Applications > Office > Quickoffice > Quickpoint and
the presentation.
To write notes in .txt format, press
Applications > Office > Notes.
To upgrade to a version of Quickpoint that supports
editing, open a presentation and select Options > Upgrade
to edit. The upgrade is chargeable.
Recorder
See also ‘More information’, p. 111.
Quickmanager
With Quickmanager, you can download software,
including updates, upgrades, and other useful applications.
You can pay for the downloads by phone bill or credit card.
To upgrade your Quickword, Quicksheet, or Quickpoint to a
version that supports editing, you need to buy a license.
To open Quickmanager, press
, and select
Applications > Office > Quickoffice > Quickmanager.
Office
Quickpoint
, and select
To record voice memos, press
, and select
Applications > Media > Recorder. To record a telephone
conversation, open Recorder during a voice call. Both
parties hear a tone every 5 seconds during recording.
Adobe Reader
With Adobe Reader, you can read .pdf documents on the
display of your device.
This application has been optimized for .pdf document
content on handsets and other mobile devices, and
provides only a limited set of features compared with PC
versions.
111
Office
To open documents, press
, and select Applications >
Office > Adobe PDF. Your recent files are listed in the file
view. To open a document, scroll to it, and press .
Use File mgr. to browse and open documents stored in the
device memory and on a compatible memory card (if
inserted).
More information
To share questions, suggestions, and information about the
application, visit the Adobe Reader for Symbian OS user
forum at http://adobe.com/support/forums/main.html.
, and select Applications > Calculator.
Note: This calculator has limited accuracy and is
designed for simple calculations.
Zip manager
Use the Zip manager application to compress files.
Compressed files use less memory and are more convenient
to send to compatible devices.
Converter
,
Converter has limited accuracy, and rounding errors may
occur.
112
Select Type > Currency > Options > Currency rates.
Before you can make currency conversions, you must select
a base currency and add exchange rates. The rate of the
base currency is always 1.
Note: When you change base currency, you must
enter new exchange rates because all previously set
exchange rates are cleared.
Calculator
To convert measures from one unit to another, press
and select Applications > Office > Converter.
to convert. In the next Unit field, select the unit to
which you want to convert.
3 In the first Amount field, enter the value you want to
convert. The other Amount field changes automatically
to show the converted value.
Set base currency and exchange rates
For more information, visit www.adobe.com.
Press
1 In the Type field, select the measure you want to use.
2 In first Unit field, select the unit from which you want
To open the application, press
Applications > Office > Zip.
, and select
To create or manage archives or to change the settings,
select Options and the desired option.
Wireless Keyboard
To set up a Nokia Wireless Keyboard or other compatible
wireless keyboard supporting the Bluetooth Human
Interface Devices (HID) profile for use with your device, use
the Wireless keybd. application. The keyboard enables you
to enter text in comfort, using the full QWERTY layout, for
text messages, e-mail, and calendar entries.
1 Activate Bluetooth connectivity on your device.
2 Switch on the keyboard.
3 Press
, and select Tools > Connectivity > Wireless
keybd..
4 Select Options > Find keyboard to start searching for
devices with Bluetooth connectivity.
5 Select the keyboard from the list, and press to start
the connection.
6 To pair the keyboard with your device, enter a passcode
of your choice (1 to 9 digits) on the device and the same
passcode on your keyboard.
To enter the digits of the passcode, you may need to
press the Fn key first.
7 If you are asked for a keyboard layout, select it from a
list on your device.
8 When the name of the keyboard appears, its status
changes to Keyboard connected, and the green
indicator of your keyboard blinks slowly; the keyboard
is ready for use.
For details on the operation and maintenance of your
keyboard, see its user guide.
Office
You can store archive files on the device or on a compatible
memory card.
Barcode reader
Use the Barcode application to decode different types of
codes (such as barcodes and codes in magazines). The
codes may contain information such as URL links, e-mail
addresses, and phone numbers.
To scan and decode barcodes, press
Applications > Office > Barcode.
, and select
To activate the main camera to scan a code, open the lens
cover by using the camera activation switch. To scan the
code, select Scan code. Set the code between the red lines
on the display. The Barcode attempts to scan and decode
the code, and the decoded information appears on the
display.
To save the scanned data, select Options > Save. The data
is saved in .bcr format.
To view previously saved, decoded information in the main
view, select Saved data. To open a code, press .
When viewing the decoded information, the different links,
URL links, phone numbers, and e-mail addresses are
113
Office
indicated by icons on the top of the display in the direction
they appear in the decoded information.
In the Saved data view, select Options and you can scan
new codes or use the decoded information.
The device reverts to the standby mode to save battery
power if Barcode cannot be activated or if no keys are
pressed for 1 minute. To continue scanning or viewing
saved information, press .
114
Tools
Tools
Application manager
Install applications and software
Press
, and select Applications > App. mgr.. You can
install two types of applications and software to your
device:
• J2METM applications based on JavaTM technology with
the extension .jad or .jar ( ).
• Other applications and software suitable for the
Symbian operating system ( ). The installation files
have the .sis extension. Only install software
specifically designed for your Nokia N95. Software
providers will often refer to the official model number
of this product: the Nokia N95-1.
indicates a .sis application,
a Java application,
that the application is not fully installed, and
that the
application is installed on the memory card.
Installation files may be transferred to your device from a
compatible computer, downloaded during browsing, or
sent to you in a multimedia message, as an e-mail
attachment, or using Bluetooth connectivity or infrared.
You can use Nokia Application Installer in Nokia Nseries PC
Suite to install an application to your device. If you use
Microsoft Windows Explorer to transfer a file, save the file
to a compatible memory card (local disk).
Important: Only install and use applications and
other software from trusted sources, such as applications
that are Symbian Signed or have passed the Java VerifiedTM
testing.
Before installation, note the following:
• To view the application type, version number, and the
supplier or manufacturer of the application, select
Options > View details.
To display the security certificate details of the
application, in Certificates, select View details. See
‘Certificate management’, p. 122.
• If you install a file that contains an update or repair to
an existing application, you can only restore the
original application if you have the original installation
file or a full back-up copy of the removed software
package. To restore the original application, remove the
application, and install the application again from the
original installation file or the back-up copy.
115
Tools
116
• The .jar file is required for installing Java applications.
If it is missing, the device may ask you to download it.
If there is no access point defined for the application,
you are asked to select one. When you are downloading
the .jar file, you may need to enter a user name and
password to access the server. You obtain these from
the supplier or manufacturer of the application.
1 To locate an installation file, press
, and select
Applications > App. mgr.. Alternatively, search the
device memory or a compatible memory card (if
inserted) in File mgr., or open a message in
Messaging > Inbox that contains an installation file.
2 In App. mgr., select Options > Install. In other
applications, scroll to the installation file, and press
to start the installation.
During installation, the device shows information
about the progress of the installation. If you are
installing an application without a digital signature or
certification, the device displays a warning. Continue
installation only if you are sure of the origin and
contents of the application.
Important: Your device can only support one
antivirus application. Having more than one application
with antivirus functionality could affect performance and
operation or cause the device to stop functioning.
After you install applications to a compatible memory
card, installation files (.sis) remain in the device memory.
The files may use large amounts of memory and prevent
you from storing other files. To maintain sufficient
memory, use Nokia Nseries PC Suite to back up installation
files to a compatible PC, then use the file manager to
remove the installation files from the device memory. See
‘File manager’, p. 18. If the .sis file is a message
attachment, delete the message from the Messaging
inbox.
Remove applications and software
Scroll to a software package, and select Options >
Remove. Select Yes to confirm.
To start an installed application, locate it in the menu, and
press . If the application does not have a default folder
defined, it is installed in the Applications folder.
If you remove software, you can only reinstall it if you have
the original software package or a full backup of the
removed software package. If you remove a software
package, you may no longer be able to open documents
created with that software.
To see which software packages are installed or removed
and when, select Options > View log.
If another software package depends on the software
package that you removed, the other software package
Settings
Select Options > Settings and from the following:
Software installation—Select whether Symbian software
that has no verified digital signature can be installed.
Online certificate check—Select to check the online
certificates before installing an application.
Default web address—Set the default address used when
checking online certificates.
Some Java applications may require a message to be sent
or a network connection to a specific access point for
downloading extra data or components. In the App. mgr.
main view, scroll to an application, and select Options >
Open to change settings related to that specific
application.
Digital rights management
Content owners may use different types of digital rights
management (DRM) technologies to protect their
intellectual property, including copyrights. This device uses
various types of DRM software to access DRM-protected
content. With this device you can access content protected
with WMDRM 10, OMA DRM 1.0, and OMA DRM 2.0. If
certain DRM software fails to protect the content, content
owners may ask that such DRM software's ability to access
new DRM-protected content be revoked. Revocation may
also prevent renewal of such DRM-protected content
already in your device. Revocation of such DRM software
does not affect the use of content protected with other
types of DRM or the use of non-DRM-protected content.
Tools
may stop working. Refer to the documentation of the
installed software package for details.
Digital rights management (DRM) protected content
comes with an associated activation key that defines your
rights to use the content.
If your device has OMA DRM protected content, to back up
both the activation keys and the content, use the backup
feature of Nokia Nseries PC Suite. Other transfer methods
may not transfer the activation keys which need to be
restored with the content for you to be able to continue
the use of OMA DRM protected content after the device
memory is formatted. You may also need to restore the
activation keys in case the files on your device get
corrupted.
If your device has WMDRM protected content, both the
activation keys and the content will be lost if the device
memory is formatted. You may also lose the activation keys
and the content in case the files on your device get
corrupted. Losing the activation keys or the content may
limit your ability to use the same content on your device
again. For more information, contact your service provider.
117
Tools
Some activation keys may be connected to a specific SIM
card, and the protected content can be accessed only if the
SIM card is inserted in the device.
To view the digital rights activation keys stored in your
device, press
, and select Applications >Media > Actv.
keys and from the following:
Valid keys—View keys that are connected to one or more
media files and keys whose validity period has not started
yet.
Invalid keys—View keys that are not valid; the time period
for using the media file is exceeded or there is a protected
media file in the device but no connected activation key.
Not in use—View keys that have no media files connected
to them in the device.
To buy more usage time or extend the usage period for a
media file, select an invalid activation key and Options >
Get new key. Activation keys cannot be updated if web
service message reception is disabled. See ‘Web service
messages’, p. 91.
To view detailed information, such as the validity status
and ability to send the file, scroll to an activation key, and
press .
118
Voice commands
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see ‘Voice dialling’, p. 100.
To activate enhanced voice commands for starting
applications and profiles, you must open the Voice comm.
application and its Profiles folder. Press
, and select
Tools > Voice comm. > Profiles; the device creates voice
tags for the applications and profiles. To use enhanced
voice commands, press and hold
in the standby mode,
and say a voice command. The voice command is the name
of the application or profile displayed in the list.
To add more applications to the list, select Options > New
application. To add a second voice command that can be
used to start the application, select Options > Change
command, and enter the new voice command as text.
Avoid very short names, abbreviations, and acronyms.
To listen to the synthesised voice tag, select Options >
Playback.
To change voice command settings, select Options >
Settings. To switch off the synthesiser that plays
recognised voice tags and commands in the selected
device language, select Synthesiser > Off. To reset voice
recognition learning, for example, when the main user of
the device has changed, select Remove voice adapts..
To change settings, press
, and select Tools > Settings.
Scroll to General, Phone, Connection, or Applications,
and press . Scroll to a setting or setting group you want
to change, and press .
Themes opens the Themes application. See ‘Change the
look of your device’, p. 83.
Voice comms. opens the settings for the Voice comm.
application. See ‘Voice commands’, p. 118.
Some settings may be preset for the device by your service
provider, and you may not be able to change them.
Display
General
Light sensor—Press
or
to adjust the light sensor
that observes the lighting conditions and adjusts the
brightness of the display. The light sensor may cause the
display to flicker in low light.
To edit the general settings of your device or restore the
original default device settings, press
, and select
Tools > Settings > General > Personalisation, Date and
time, Enhancement, Security, Factory settings, or
Positioning.
For Date and time, see ‘Clock’, p. 85.
Personalisation
To edit settings related to the display, standby mode, and
general functionality of your device, press
, and select
Tools > Settings > General > Personalisation.
Settings
Settings
Font size—Adjust the size of the text and icons on the
display.
Power saver time-out—Select the time-out period after
which the power saver is activated.
Welcome note / logo—The welcome note or logo is
displayed briefly each time you switch on the device.
Select Default to use the default image, Text to write a
welcome note, or Image to select an image from Gallery.
Light time-out—Select a time-out after which the
backlight of the display is switched off.
Tones allows you to change the tones of calendar, clock,
and the currently active profile.
119
Settings
Standby mode
Active standby—Use shortcuts to applications in the
standby mode. See ‘Active standby mode’, p. 84.
Active standby apps.—Select the application shortcuts
you want to appear in the active standby. This setting is
only available if Active standby is on.
Shortcuts > Left selection key and Right selection key—
Assign a shortcut to the selection keys in the standby
mode.
You can also assign keypad shortcuts for the different
presses of the scroll key. The scroll key shortcuts are not
available if the active standby is on.
Operator logo—This setting is only available if you have
received and saved an operator logo. Select Off if you do
not want the logo to be shown.
Language
Phone language—Changing the language of the display
texts in your device also affects the format used for date
and time and the separators used, for example, in
calculations. Automatic selects the language according to
the information on your SIM card. After you change the
display text language, the device restarts.
Changing the settings for Phone language or Writing
language affects every application in your device, and the
120
change remains effective until you change these settings
again.
Writing language—Changing the language affects the
characters and special characters available when writing
text and the predictive text dictionary used.
Predictive text—Set the predictive text input On or Off for
all editors in the device. The predictive text dictionary is
not available for all languages.
Enhancement
For enhancement indicators, see ‘Essential indicators’,
p. 13. Some enhancement connectors do not indicate
which type of an enhancement is connected to the device.
The available settings depend on the type of enhancement.
Select an enhancement and from the following:
Default profile—Set the profile that you want activated
each time you connect a certain compatible enhancement
to your device. See ‘Profiles—set tones’, p. 81.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
ringing type is set to Beep once or Silent, automatic
answer is disabled.
Lights—Set whether lights remain on, or are switched off
after the time-out. This setting is not available for all
enhancements.
Default profile—Set the profile that you want activated
each time you connect a Nokia Video Connectivity Cable to
your device.
TV screen size—Select the aspect ratio of the TV: Normal
or Widescreen for widescreen TVs.
Tv system—Select the analog video signal system that is
compatible with your TV.
Flicker filter—To improve image quality on the screen of
your TV, select On. The flicker filter may not diminish
image flicker on all TV screens.
Security
To edit settings related to the security, press
, and
select Tools > Settings > General > Security > Phone
and SIM card, Certificate management, or Security
module.
Phone and SIM card
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards.
PIN code, PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of these
codes, contact your service provider. See ‘Glossary of PIN
and lock codes’, p. 122.
Settings
To change the settings for a TV-Out connection, select TVOut and from the following:
Avoid using access codes similar to the emergency
numbers to prevent accidental dialling of the emergency
number.
Keypad autolock period—Select whether the keypad is
locked when your device has been idle for a certain period
of time.
Phone autolock period—To avoid unauthorised use, you
can set a time-out after which the device automatically
locks. A locked device cannot be used until the correct lock
code is entered. To turn off the autolock period, select
None.
See ‘Glossary of PIN and lock codes’, p. 122.
When the device is locked, calls may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press
commands opens. Select Lock phone.
. A list of
Lock keys if slide closed—Select whether the keypad is
locked when you close the 2-way slide.
Tip! To lock or unlock the keypad manually, press
then
,
121
Settings
Lock if SIM card changed—You can set the device to ask
for the lock code when an unknown SIM card is inserted
into your device. The device maintains a list of SIM cards
that are recognised as the owner’s cards.
Closed user group—You can specify a group of people to
whom you can call and who can call you (network service).
When calls are limited to closed user groups, calls may be
possible to the official emergency number programmed
into your device.
Confirm SIM services—You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
Glossary of PIN and lock codes
If you forget any of these codes, contact your service
provider.
Personal identification number (PIN) code—This code
protects your SIM card against unauthorised use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the
code is blocked, and you need the PUK code to unblock it.
UPIN code—This code may be supplied with the USIM card.
The USIM card is an enhanced version of the SIM card and
is supported by UMTS mobile phones.
122
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in your
device.
Lock code (also known as security code)—This code (5
digits) can be used to lock the device to avoid unauthorised
use. The factory setting for the lock code is 12345. To
avoid unauthorised use of your device, change the lock
code. Keep the new code secret and in a safe place
separate from your device. If you forget the code, contact
your service provider.
Personal unblocking key (PUK) code and PUK2 code—These
codes (8 digits) are required to change a blocked PIN code
or PIN2 code, respectively. If the codes are not supplied
with the SIM card, contact the operator whose SIM card is
in your device.
UPUK code—This code (8 digits) is required to change a
blocked UPIN code. If the code is not supplied with the
USIM card, contact the operator whose USIM card is in
your device.
Certificate management
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
In the certificate management main view, you can see a
list of authority certificates that are stored in your device.
Press
to see a list of personal certificates, if available.
Important: Even if the use of certificates makes the
risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security. The
existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct,
authentic, or trusted certificates for increased security to
be available. Certificates have a restricted lifetime. If
‘Expired certificate’ or ‘Certificate not valid yet’ is shown
even if the certificate should be valid, check that the
current date and time in your device are correct.
You are notified if the identity of the server is not
authentic or if you do not have the correct security
certificate in your device.
To check certificate details, scroll to a certificate, and
select Options > Certificate details. When you open
certificate details, the validity of the certificate is checked,
and one of the following notes may be displayed:
• Certificate not trusted—You have not set any
application to use the certificate. See ‘Change the trust
settings’, p. 123.
• Expired certificate—The period of validity has ended
for the selected certificate.
• Certificate not valid yet—The period of validity has
not yet begun for the selected certificate.
• Certificate corrupted—The certificate cannot be used.
Contact the certificate issuer.
Change the trust settings
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
View certificate details—check authenticity
Scroll to an authority certificate, and select Options >
Trust settings. Depending on the certificate, a list of the
applications that can use the selected certificate is shown.
For example:
You can only be sure of the correct identity of a server
when the signature and the period of validity of a server
certificate have been checked.
Settings
Digital certificates should be used if you want to connect
to an online bank or another site or remote server for
actions that involve transferring confidential information.
They should also be used if you want to reduce the risk of
viruses or other malicious software and be sure of the
authenticity of software when downloading and installing
software.
123
Settings
• Symbian installation: Yes—The certificate is able to
certify the origin of a new Symbian operating system
application.
• Internet: Yes—The certificate is able to certify servers.
• App. installation: Yes—The certificate is able to certify
the origin of a new JavaTM application.
Select Options > Edit trust setting to change the value.
Security module
To view or edit a security module (if available) in Security
module, scroll to it, and press the scroll key. To view
detailed information about a security module, scroll to it,
and select Options > Security details.
Factory settings
To reset some of the settings to their original values, select
Factory settings. To do this, you need the lock code. See
‘Phone and SIM card’, p. 121. After resetting, the device
may take a longer time to power on. Documents and files
are unaffected.
Positioning
Positioning methods—Select the positioning methods
used to detect the location of your device: the internal GPS
receiver of your device, Bluetooth GPS to use a compatible
external GPS receiver with Bluetooth connectivity, and
124
Network based to use information from the cellular
network (network service). The location information can be
used by compatible applications in your device.
Phone
To edit the settings related to making and receiving calls,
press
, and select Tools > Settings > Phone > Call, Call
divert, Call barring, or Network.
Call
Send my caller ID—You can set your phone number to be
displayed to (Yes) or hidden from (No) the person to whom
you are calling, or the value may be set by your service
provider when you make a subscription (Set by network)
(network service).
Call waiting—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on
(Activate) or off (Cancel), or check whether the function
is activated (Check status).
Reject call with SMS—Select Yes to send a text message
to a caller informing why you could not answer the call.
See ‘Answer or decline a call’, p. 104.
Message text—Write a text to be sent in a text message
when you reject a call.
Automatic redial—Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialling,
press
.
Show call duration—Activate this setting if you want the
length of a call to be displayed during the call.
Speed dialling—Select On, and the numbers assigned to
the speed dialling keys (
) can be dialled by
pressing and holding the key. See also ‘Speed dial a phone
number’, p. 99.
Anykey answer—Select On, and you can answer an
incoming call by briefly pressing any keypad key, except
,
,
, and
.
Line in use—This setting (network service) is shown only if
the SIM card supports two subscriber numbers, that is, two
phone lines. Select which phone line you want to use for
making calls and sending text messages. Calls on both lines
can be answered irrespective of the selected line. If you
select Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected,
is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold
in the standby mode.
Line change—To prevent line selection (network service),
select Disable if supported by your SIM card. To change
this setting, you need the PIN2 code.
Call divert
Settings
Image in video call—If video is not sent during a video call,
you can select a still image to be displayed instead.
Call divert allows you to divert your incoming calls to your
voice mailbox or another phone number. For details,
contact your service provider.
Select which calls you want to divert and the desired
diverting option. To divert voice calls when your number is
busy or when you reject incoming calls, select If busy. Set
the option on (Activate) or off (Cancel), or check whether
the option is activated (Check status).
Several diverting options can be active at the same time.
When all calls are diverted,
is shown in the
standby mode.
Call barring and call diverting cannot be active at the same
time.
Call barring
Call barring (network service) allows you to restrict the
calls that you make or receive with the device. To change
the settings, you need the barring password from your
service provider.
125
Settings
Select the desired barring option, and set it on (Activate)
or off (Cancel), or check whether the option is active
(Check status). Call barring affects all calls, including
data calls.
Call barring and call diverting cannot be active at the same
time.
When calls are barred, calls may be possible to certain
official emergency numbers.
Network
Your device can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
with
.
Network mode (shown only if supported by the wireless
service provider)—Select which network to use. If you
select Dual mode, the device uses the GSM or UMTS
network automatically, according to the network
parameters and the roaming agreements between the
wireless service providers. Contact your service provider for
more details.
Operator selection—Select Automatic to set the device to
search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
126
you to reselect a network. The selected network must have
a roaming agreement with your home cellular network.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select On to set the device to indicate
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
Connection
To edit access point and other connection settings, press
, and select Tools > Settings > Connection >
Bluetooth, USB, Access points, Packet data, Wireless
LAN, SIP settings, Internet tel., Configurations, or APN
control.
For Bluetooth connectivity settings, see ‘Settings’, p. 29.
For USB data cable settings, see ‘USB’, p. 32.
Data connections and access points
Your device supports packet data connections (network
service), such as GPRS in the GSM network. When you use
your device in GSM and UMTS networks, multiple data
connections can be active at the same time, and access
You can also use a wireless LAN data connection. See
‘Wireless LAN’, p. 26. Only one connection in one wireless
LAN can be active at a time, but several applications can
use the same internet access point.
To establish a data connection, an access point is required.
You can define different kinds of access points, such as:
• MMS access point to send and receive multimedia
messages
• Internet access point (IAP) to send and receive e-mail
and connect to the internet
Check the type of access point you need with your service
provider for the service you want to access. For availability
and subscription to packet data connection services,
contact your service provider.
To create a new access point, select Options > New access
point.
To edit the settings of an access point, select Options >
Edit. Follow the instructions from your service provider.
Connection name—Enter a descriptive name for the
connection.
Data bearer—Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red asterisk. Other fields can be
left empty, unless you have been instructed otherwise by
your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Access points
You may receive access point settings in a message from a
service provider. See ‘Data and settings’, p. 91. Some or all
access points may be preset for your device by your service
provider, and you may not be able to change, create, edit,
or remove them.
indicates a protected access point.
indicates a packet data access point, and
wireless LAN access point.
Tip! You can create internet access points in a
wireless LAN with the WLAN wizard. See ‘WLAN
wizard’, p. 27.
Settings
points can share a data connection. In the UMTS network,
data connections remain active during voice calls.
a
Packet data access points
Follow the instructions from your service provider.
Access point name—You obtain the access point name
from your service provider.
User name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
127
Settings
Prompt password—If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
Authentication—Select Normal or Secure.
Homepage—Depending on the access point you are setting
up, enter the web address or the address of the multimedia
messaging center.
Select Options > Advanced settings to change the
following settings:
Network type—Select the internet protocol type to use:
IPv4 or IPv6. The other settings depend on the selected
network type.
Phone IP address (for IPv4 only)—Enter the IP address of
your device.
DNS address—In Primary DNS address, enter the IP
address of the primary DNS server. In Secondary DNS
address, enter the IP address of the secondary DNS server.
Contact your internet service provider to obtain these
addresses.
Proxy server address—Define the address for the proxy
server.
Proxy port number—Enter the proxy port number.
128
Wireless LAN access points
Follow the instructions from the wireless LAN service
provider.
WLAN network name—Select Enter manually or Search
for networks. If you select an existing network, WLAN
network mode and WLAN security mode are determined
by the settings of its access point device.
Network status—Defines whether the network name is
shown.
WLAN network mode—Select Ad-hoc to create an ad hoc
network and to allow devices to send and receive data
directly; a wireless LAN access point device is not needed.
In an ad-hoc network, all devices must use the same
WLAN network name.
WLAN security mode—Select the encryption used: WEP,
802.1x (not for ad hoc networks), or WPA/WPA2. If you
select Open network, no encryption is used. The WEP,
802.1x, and WPA functions can be used only if the network
supports them.
WLAN security settings—Enter the settings for the
selected security mode:
Security settings for WEP:
• Wep key in use—Select the WEP key number. You can
create up to four WEP keys. The same settings must be
entered on the wireless LAN access point device.
authentication type between your device and the
wireless LAN access point device.
• WEP key settings—Enter WEP encryption (length of
the key), WEP key format (ASCII or Hexadecimal), and
WEP key (the WEP key data in the selected format).
Security settings for 802.1x and WPA/WPA2:
• WPA/WPA2—Select the means of authentication: EAP
to use an extensible authentication protocol (EAP)
plug-in, or Pre-shared key to use a password.
Complete the appropriate settings:
• EAP plug-in settings (only for EAP)—Enter the settings
as your service provider instructs.
• Pre-shared key (only for Pre-shared key)—Enter a
password. The same password must be entered on the
wireless LAN access point device.
• WPA2 only mode (only for WPA/WPA2)—Select
whether Temporal Key Integrity Protocol (TKIP) is used.
Homepage—Define a home page.
Select Options > Advanced settings and from the
following:
IPv4 settings: Phone IP address (the IP address of your
device), Subnet mask (the subnet IP address), Default
gateway (the gateway), and DNS address. Enter the IP
addresses of the primary and secondary DNS server.
Contact your internet service provider for these addresses.
IPv6 settings > DNS address—Select Automatic, Wellknown, or User defined.
Ad-hoc channel (only for Ad-hoc)—To enter a channel
number (1-11) manually, select User defined.
Settings
• Authentication type—Select Open or Shared for the
Proxy server address—Enter the address for the proxy
server.
Proxy port number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data connection—If you select When available
and you are in a network that supports packet data, the
device registers to the packet data network. Starting an
active packet data connection (for example, to send and
receive e-mail) is quicker. If there is no packet data
coverage, the device periodically tries to establish a packet
data connection. If you select When needed, the device
uses a packet data connection only if you start an
application or action that needs it.
Access point—The access point name is needed to use your
device as a packet data modem to your computer.
High speed packet access—Enable or disable the use of
HSDPA (network service) in UMTS networks. For more
information on HSDPA, see ‘Fast downloading’, p. 14.
129
Settings
Wireless LAN
Show WLAN availability—Select whether
when a wireless LAN is available.
Configurations
is displayed
Scan for networks—If you set Show WLAN availability to
Yes, select how often the device searches for available
wireless LANs and updates the indicator.
APN control
To view advanced settings, select Options > Advanced
settings. Changing wireless LAN advanced settings is not
recommended.
With APN control service, you can restrict packet data
connections and allow your device to use only certain
packet data access points.
SIP settings
This setting is only available if your SIM card supports the
access point control service.
SIP (Session Initiation Protocol) settings are needed for
certain network services using SIP, such as video sharing.
You may receive the settings in a special text message
from your service provider. You can view, delete, or create
these setting profiles in SIP settings.
Internet call settings
To create a new internet call profile, select Options > New
profile.
To edit an existing profile, select Options > Edit.
130
You may receive trusted server settings from your service
provider in a configuration message. You can save view or
delete these settings in Configurations.
To set the control service on or off or to change the
allowed access points, select Options and the
corresponding option. To change the options, you need
your PIN2 code. Contact your service provider for the code.
Applications
To edit the settings of some of the applications in your
device, press
, and select Tools > Settings >
Applications. The settings are also available in each
application by selecting the settings option.
Access codes
Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the
lock code, contact your device dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your wireless service
provider.
For information about passwords, contact your access
point provider, for example, a commercial Internet service
provider (ISP) or wireless service provider.
Application not responding
Q: How do I close an application that is not responding?
A: Press and hold
. Scroll to the application, and press
to close the application.
Bluetooth connectivity
Q: Why can’t I find my friend’s device?
A: Check that both devices are compatible, have activated
Bluetooth connectivity, and are not in hidden mode. Check
also that the distance between the two devices is not over
10 meters (33 feet) and that there are no walls or other
obstructions between the devices.
Q: Why can’t I end a Bluetooth connection?
A: If another device is connected to your device, you can
either end the connection using the other device or by
deactivating Bluetooth connectivity. Select Tools >
Bluetooth > Bluetooth > Off.
Camera
Q: Why do images look smudgy?
A: Ensure that the camera lens protection windows are clean.
Troubleshooting: Q&A
Troubleshooting: Q&A
Display
Q: Why do missing, discolored, or bright dots appear on the
screen every time I turn on my device?
A: This is a characteristic of this type of display. Some displays
may contain pixels or dots that remain on or off. This is
normal, not a fault.
Home network (UPnP)
Q: Why can’t the other device see the files stored on my
device?
A: Make sure that you have configured the home network
settings, Content sharing is turned on in your device, and
the other device is UPnP compatible.
Q: What can I do if my home network connection stops
working?
A: Switch off the wireless LAN connection from your
compatible PC and your device, and switch it on again. If
131
Troubleshooting: Q&A
this does not help, restart your compatible PC and your
device. If the connection still does not work, reconfigure
the WLAN settings in both your compatible PC and device.
See ‘Wireless LAN’, p. 26, and ‘Connection’, p. 126.
Q: Why can't I see my compatible PC in my device in the home
network?
Q: How can I save my data before deleting it?
A: If you are using a firewall application in your compatible
PC, check that it allows Home media server to use the
external connection (you can add Home media server to
the firewall applications exceptions list). Check from the
firewall settings that the firewall application allows traffic
to the following ports: 1900, 49152, 49153 and 49154.
Some WLAN access point devices have a built-in firewall.
In such cases, check that the firewall in the access point
device does not block traffic to the following ports: 1900,
49152, 49153 and 49154.
Check that the WLAN settings are the same in your device
and compatible PC.
A: Save your data using one of the following methods:
Memory low
A: The contact card does not have a phone number or an
e-mail address. Add the missing information to the contact
card in Contacts.
Q: What can I do if my device memory is low?
A: You can delete unused items saved in your device regularly
to avoid memory getting low. See ‘Memory low—free
memory’, p. 18.
To delete contact information, calendar notes, call timers,
call cost timers, game scores, or any other data, go to the
respective application to remove the data. If you are
deleting multiple items and one of the following notes are
shown: Not enough memory to perform operation.
Delete some data first. or Memory low. Delete some
132
data from phone memory., try deleting items one by one
(starting from the smallest item).
To view what kind of data you have and how much memory
the different data groups consume, press
, and select
Tools > File manager > Options > Memory details.
• Use Nokia Nseries PC Suite to make a backup copy of all
data to a compatible computer.
• Send images to your e-mail address, then save the images
to your computer.
• Send data using Bluetooth connectivity to a compatible
device.
• Store data on a compatible memory card.
Messaging
Q: Why can’t I select a contact?
Multimedia messaging
Q: The note Retrieving message is shown briefly. What is
happening?
A: The device is trying to retrieve a multimedia message from
the multimedia messaging center.
Check that the settings for multimedia messaging are
defined correctly and that there are no mistakes in phone
Q: How can I end the data connection when the device starts
a data connection again and again?
A: To stop the device from making a data connection, press
, and select Messaging > Options > Settings >
Multimedia message > Multimedia retrieval and one of
the following:
Manual—to have the multimedia messaging center save
messages to be retrieved later. You receive a notification
when there is a new multimedia message that you can
retrieve in the multimedia message center.
Off—to ignore all incoming multimedia messages. After
this change, the device does not make any network
connections related to multimedia messaging.
PC connectivity
Q: Why do I have problems in connecting the device to my PC?
A: Make sure that Nokia Nseries PC Suite is installed and
running on your PC. See the user guide for Nokia Nseries
PC Suite on the CD-ROM or DVD-ROM. For further
information on how to use Nokia Nseries PC Suite, see the
help function on Nokia Nseries PC Suite or visit the support
pages at www.nokia.com.
Q: Can I use my device as a fax modem with a compatible PC?
A: You cannot use your device as a fax modem. However, with
call diverting (network service), you can divert incoming
fax calls to another phone number.
Wireless LAN
Q: Why can't I see a wireless LAN (WLAN) access point even
though I know I'm within its range?
A: The WLAN access point may use a hidden service set
identifier (SSID). You can only access networks that use a
hidden SSID if you know the correct SSID, and have created
a WLAN Internet access point for the network on your
Nokia device.
Q: How do I switch wireless LAN (WLAN) off on my Nokia
device?
A: The WLAN on your Nokia device will switch off when you
are not trying to connect, or are not connected to another
access point, or scanning for available networks. To further
reduce battery consumption, you can specify that your
Nokia device does not scan, or scans less often, for
available networks in the background. WLAN will switch
off in between background scans.
Troubleshooting: Q&A
numbers or addresses. Press
, and select Messaging >
Options > Settings > Multimedia msg..
To change the background scan settings:
, and select Tools > Settings > Connection >
Wireless LAN.
2 Change the value of Show WLAN availability to Never to
stop background scans, or increase the background scan
time interval in Scan for networks.
3 To save your changes, press Back.
1 Press
When Scan for networks is set to Never, the WLAN
availability icon will not be shown in the standby mode.
133
Troubleshooting: Q&A
134
However, you can still manually scan for available WLAN
networks, and connect to WLAN networks as usual.
Charging and discharging
Your device is powered by a rechargeable battery. The battery
can be charged and discharged hundreds of times, but it will
eventually wear out. When the talk and standby times are
noticeably shorter than normal, replace the battery. Use only
Nokia approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device.
If a replacement battery is being used for the first time or if
the battery has not been used for a prolonged period, it may
be necessary to connect the charger, then disconnect and
reconnect it to begin charging the battery.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave a fully charged battery
connected to a charger, since overcharging may shorten its
lifetime. If left unused, a fully charged battery will lose its
charge over time.
If the battery is completely discharged, it may take several
minutes before the charging indicator appears on the display
or before any calls can be made.
Use the battery only for its intended purpose. Never use any
charger or battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative (-)
terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a
spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed
car in summer or winter conditions, will reduce the capacity
and lifetime of the battery. Always try to keep the battery
between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the
battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
Battery information
Battery information
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of batteries
according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Do not dismantle or shred cells or batteries. In the event of a
battery leak, do not allow the liquid to come in contact with
the skin or eyes. In the event of such a leak, flush your skin or
eyes immediately with water, or seek medical help.
Nokia battery authentication
guidelines
Always use original Nokia batteries for your safety. To check
that you are getting an original Nokia battery, purchase it from
135
Battery information
an authorised Nokia dealer, and inspect the hologram label
using the following steps:
Successful completion of the steps is not a total assurance of
the authenticity of the battery. If you have any reason to
believe that your battery is not an authentic, original Nokia
battery, you should refrain from using it, and take it to the
nearest authorised Nokia service point or dealer for assistance.
Your authorised Nokia service point or dealer will inspect the
battery for authenticity. If authenticity cannot be verified,
return the battery to the place of purchase.
Authenticate hologram
1 When you look at the hologram on
the label, you should see the Nokia
connecting hands symbol from
one angle and the Nokia Original
Enhancements logo when looking
from another angle.
2 When you angle the hologram
left, right, down, and up, you
should see 1, 2, 3, and 4 dots on
each side respectively.
136
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery, please do
not use the battery. Take it to the nearest authorised Nokia
service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and
may result in poor performance and damage to your device
and its enhancements. It may also invalidate any approval or
warranty applying to the device.
To find out more about original Nokia batteries, visit
www.nokia.com/battery.
Your device is a product of superior design and craftsmanship
and should be treated with care. The following suggestions
will help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity, and all types
of liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet,
remove the battery, and allow the device to dry completely
before replacing it.
• Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as instructed
in this guide.
• Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses, such as
camera, proximity sensor, and light sensor lenses.
• Use only the supplied or an approved replacement
antenna. Unauthorised antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep, such as
contacts and calendar notes.
• To reset the device from time to time for optimum
performance, power off the device and remove the battery.
These suggestions apply equally to your device, battery,
charger, or any enhancement. If any device is not working
properly, take it to the nearest authorised service facility for
service.
Care and maintenance
Care and maintenance
Disposal
The crossed-out wheeled-bin symbol on your product,
literature, or packaging reminds you that in the
European Union all electrical and electronic products,
batteries, and accumulators must be taken to separate
collection at the end of their working life. Do not dispose of
these products as unsorted municipal waste.
Return the products to collection to prevent possible harm to
the environment or human health from uncontrolled waste
disposal and to promote the sustainable reuse of material
resources. Collection information is available from the product
retailer, local waste authorities, national producer
responsibility organizations, or your local Nokia
representative. For more information, see product EcoDeclaration or country-specific information at
www.nokia.com.
137
Additional safety information
Additional safety information
Small children
Medical devices
Your device and its enhancements may contain small parts.
Keep them out of the reach of small children.
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician or
the manufacturer of the medical device to determine if they
are adequately shielded from external RF energy or if you have
any questions. Switch off your device in health care facilities
when any regulations posted in these areas instruct you to do
so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Operating environment
This device meets RF exposure guidelines when used either in
the normal use position against the ear or when positioned at
least 1.5 centimeters (5/8 inch) away from the body. When a
carry case, belt clip, or holder is used for body-worn operation,
it should not contain metal and should position the device the
above-stated distance from your body.
To transmit data files or messages, this device requires a
quality connection to the network. In some cases, transmission
of data files or messages may be delayed until such a
connection is available. Ensure the above separation distance
instructions are followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be
attracted to the device. Do not place credit cards or other
magnetic storage media near the device, because information
stored on them may be erased.
138
Implanted medical devices Manufacturers of medical
devices recommend that a minimum separation of 15.3
centimeters (6 inches) should be maintained between a
wireless device and an implanted medical device, such as a
pacemaker or implanted cardioverter defibrillator, to avoid
potential interference with the medical device. Persons who
have such devices should:
• Always keep the wireless device more than 15.3
centimeters (6 inches) from the medical device when the
wireless device is turned on.
• Not carry the wireless device in a breast pocket.
• Hold the wireless device to the ear opposite the medical
device to minimise the potential for interference.
• Turn the wireless device off immediately if there is any
reason to suspect that interference is taking place.
their implanted medical device.
If you have any questions about using your wireless device
with an implanted medical device, consult your health care
provider.
Hearing aids Some digital wireless devices may interfere
with some hearing aids. If interference occurs, consult your
service provider.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer,
or its representative, of your vehicle or any equipment that has
been added.
Only qualified personnel should service the device or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not store
or carry flammable liquids, gases, or explosive materials in the
same compartment as the device, its parts, or enhancements.
For vehicles equipped with an air bag, remember that air bags
inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the
air bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
Using your device while flying in aircraft is prohibited. Switch
off your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation
of the aircraft, disrupt the wireless telephone network, and
may be illegal.
Potentially explosive environments
Switch off your device when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Switch off the device at
refueling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas; chemical plants; or
where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often, but not always,
clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust, or
metal powders.
Additional safety information
• Read and follow the directions from the manufacturer of
139
Additional safety information
Emergency calls
Certification information (SAR)
Important: Wireless phones, including this device,
operate using radio signals, wireless networks, landline
networks, and user-programmed functions. Because of this,
connections in all conditions cannot be guaranteed. You
should never rely solely on any wireless device for essential
communications like medical emergencies.
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO
RADIO WAVES.
To make an emergency call:
1 If the device is not on, switch it on. Check for adequate
signal strength.
Some networks may require that a valid SIM card is
properly inserted in the device.
2 Press the end key as many times as needed to clear the
display and ready the device for calls.
3 Enter the official emergency number for your present
location. Emergency numbers vary by location.
4 Press the call key.
If certain features are in use, you may first need to turn those
features off before you can make an emergency call. If the
device is in the offline or flight profile mode, you may need to
change the profile to activate the phone function before you
can make an emergency call. Consult this guide or your service
provider for more information.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
140
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines
were developed by the independent scientific organisation
ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit stated in the ICNIRP guidelines is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for
SAR are conducted using standard operating positions with
the device transmitting at its highest certified power level in
all tested frequency bands. The actual SAR level of an
operating device can be below the maximum value because
the device is designed to use only the power required to reach
the network. That amount changes depending on a number of
factors such as how close you are to a network base station.
The highest SAR value under the ICNIRP guidelines for use of
the device at the ear is 0.58 W/kg.
Use of device accessories and enhancements may result in
different SAR values. SAR values may vary depending on
national reporting and testing requirements and the network
band. Additional SAR information may be provided under
product information at www.nokia.com.
Index
A
access points 126
activation keys
See digital rights management
active standby mode 84
additional applications 10
Adobe reader 111
alarm clock 85
application manager 115
applications
installing 115
Java 115
removing 116
B
backing up data 17
barcode reader 113
batteries
authenticating 135
charging 135
intended for use 9
Bluetooth 28
device address 30
pairing 30
security 30
sending data 30
switching off 29
bookmarks 20
C
cache, clearing 24
calculator 112
calendar
creating entries 85
synchronising Nokia Nseries PC
Suite 86
call log
See log
calls
answering 104
barring 125
declining 104
diverting 125
duration 105
international 98
making 98
missed 105
received 105
settings 124
sharing video 102
transferring 105
waiting 105
camera
active toolbar 52
adjusting lighting and color 55
editing videos 64
flash 55
image setup settings 55
saving video clips 57
scenes 55
self-timer 56
sequence mode 56
shooting video 57
still image camera settings 54
taking pictures 51
video recorder settings 58
cell broadcast 97
certificates 122
chargers 9
clock 85
codes 122
computer connections 33
conference call 99
connection settings 126
contact cards 107
141
inserting pictures 107
sending 107
contact information 10
converter 112
copying contacts between the SIM card
and device memory 108
copyright protection
See digital rights management
D
data cable 32
data connections
details 28
ending 28
establishing 127
indicators 13
network 8, 126
settings
date 85
delivery reports 95
device manager 33
dictionary 89
digital rights management 117
Download! 19
DRM
See digital rights management
E
editing images 63
142
e-mail
automatic retrieving 93
deleting mailbox 95
deleting messages 93
opening 92
remote mailbox 91
retrieving from mailbox 92
saving 97
sending 89
settings 95
viewing attachments 92
writing 89
F
file formats
.jad 115
.jar 115, 116
.sis 115
music player 35
RealPlayer 47
file manager 18
fixed dialling 108
FM radio 39
G
gallery
active toolbar 61
editing images 63
images and videos 60
ordering files in albums 62, 67
presentations 65
print basket 62
printing images 65
slide show 64
TV out mode 64
gameplay 15
games 15
GPRS
See data connections
GPS
GPS connection 71
maps 73
positioning 71
H
hands-free operation
See loudspeaker
headset 16
help application 10
HSDPA 14
I
idle sceen
See standby mode
images
See gallery
indicators 13
infrared connection 32
installing applications 115
internet
See web
internet access points (IAP)
See access points
internet videos 45
J
Java 115
K
keyguard 15, 121
keypad lock 15, 121
L
language settings 120
lock code 122
log
duration 106
erasing contents 106
filtering 106
loudspeaker 14
M
mailbox 91
maintenance 137
maps
browsing maps 73
searching for locations 76
memory
freeing memory 18, 105
viewing memory consumption 18
memory card
ejecting 17
inserting 17
memory card tool 17
menu, rearranging 81
messaging
cell broadcast 97
e-mail 89
inbox 90
mailbox 91
multimedia messages 89
settings 93
text messages 89
microSD card 16
missed calls 105
MMS
See multimedia messages
modem 34
multimedia menu 14
multimedia messages
creating 89
receiving 90
retrieving 91
saving 97
sending 89
settings 94
music
See music player
music player
downloading music 37
file formats 35
music store 37
playing songs 35
playlists 36
transferring music 37
N
N-Gage 15
Nokia Lifeblog 48
Nokia wireless keyboard 113
notes 111
O
office applications 110
P
packet data settings 129
PC connections 33
pdf files 111
personalisation 83
phone language 120
phonebook
See contact cards
PIN codes 122
positioning 71
power saver 119
printing
143
contact cards 107
images 65
profiles 81
PUK codes 122
Q
Quickoffice 110
R
radio 39
RealPlayer 47
recent calls 105
recorder 111
remote mailbox 91, 92
remote SIM mode 31
ringing tones
3-D 82
personal ringing tone 109
See also profiles
S
safety
additional information 138
emergency calls 140
guidelines 7
scenes
image scenes 56
video scenes 56
security code
See lock code
144
sending
contact cards, business cards 107
messages 89
service commands 88
settings
access points 127
application 119
Bluetooth connectivity 29
call barring 125
call diverting 125
certificates 122
data connections 126
defining 11
display 119
e-mail 91, 95
keypad lock 121
language 120
lock code 122
messaging 93
multimedia messages 94
original settings 124
personalising the phone 81
PIN code 122
power saver 119
SIP 130
text messages 94
TV out 121
UPIN code 122
UPUK code 122
SIM card
copying names and numbers to
your device 108
messages 93
names and numbers 108
using device without a SIM card 82
sis file 115
SMS
See text messages
snooze 85
software
installing applications 115
removing applications 116
transferring a file to your device
115
software update 11
songs
file formats 35
transferring 37
sound clips 60
sounds
adjusting volume 14
muting a ringing tone 104
recording sounds 111
speaker phone
See loudspeaker
speed dialling 99
standby mode 81
support information 10
svg files 65
synchronisation 33
T
text messages
inbox 88
receiving 90
saving 97
sending 89, 90
settings 94
writing 90
themes 83
time 85
tones
See ringing tones
transferring content from another
device 11
transferring music 37
troubleshooting 131
TV out
settings 121
viewing captured media files on TV
64
U
UMTS
see data connections
Universal Plug and Play 68
UPIN code 122
UPUK code 122
USB data cable 32
USSD commands 88
V
video call
answering 105
making 100
rejecting 105
video clips 60
video on demand 44
video player
See RealPlayer
videos
See gallery
voice commands 118
voice dialling 100
voice mailbox 99
changing the phone number 99
diverting calls to voice mailbox 125
voice messages 99
voice tags 118
making calls 100
volume control
adjusting volume 14
during a call 98
loudspeaker 14
W
wallpapers
changing 83
using pictures 54, 61
web
access points, See access points
blogs 24
browser 20
feeds 24
service messages 91
weblog 48
wireless LAN 26
access point settings 128
creating IAP 27, 28
scanning 130
security 68
see also Universal Plug and Play
settings 130
wizard 27
writing language 120
145
">