AVR-989P
AV Surround Receiver
AVR-989P
The AVR-989P is equipped with decoders for next-generation audio formats such as the lossless audio Dolby TrueHD and DTS-HD Master Audio formats.
This model also features high-performance video processing circuitry that reproduces SD video material from DVD players and other sources in 1080p HD
quality. The AVR-989P also monitors the structural elements of sound sources and uses Dynamic Volume to adjust volume without sacrificing dynamic
range. This A/V receiver masterfully controls a variety of media for optimum playback of high-quality audio and video content.
New Features
Ease-of-Use
•
•
•
•
• Audyssey Dynamic Volume and Dynamic EQ
• Audyssey MultEQ XT Auto setup and Room EQ
Audyssey Dynamic Volume and Dynamic EQ
4 HDMI inputs (Audio and Video)
Sirius and XM Satellite Radio ready
State-of-the-art Denon Solutions for Maximizing Content Quality
- Reproduce as perfect as a content producer intended to express
(Denon Circuitry and Construction for Hi-Fi Sound Quality /
Compressed Audio Restorer)
- Easy to use
(QUICK SELECT / Audyssey DYNAMIC EQ + DYNAMIC VOLUME)
- Connectivity (HDMI / Dock Control Terminal (Network ready)
High Quality Sound
•
•
•
•
•
•
•
•
•
•
Identical quality and power for all 7 channels, 115W x 7ch
Discrete devices for ultimate peformance in each block
Dynamic Discrete Surround Circuit, D.D.S.C.-HD
Dual New 32-bit floating point high resolution DSP processors
AL24 Plus processing provides extended dynamic range
Minimum signal path design
Direct Mechanical Ground for stable drive
Digital / Analog separate windings
Stable power supply for high-quality sound and picture playback
Compressed Audio Restorer
High Quality Video
•
•
•
•
•
Discrete devices for ultimate HD video performance in each block
Denon’s High Picture Quality Cicuitry, to enhance enjoyment of existing DVDs
Faroudja DCDi Video Processing
Analog video to HDMI scaling up to 1080p
1080p video pass through
Connectivity and Future-ready Expandability
Digital Media Connectivity
• Optional Network Streaming iPod Dock (ASD-3N - wired, ASD-3W - wireless)
• Optional iPod Audio/Phone and Video Playback Dock (ASD-1R)
• Optional iPod/iPhone Audio/Photo and Video Playback Dock (ASD-11R)
Multi-zone Capability
• 2 source / 2 zone capability
• RS-232c control, 150mA Trigger output
State-of-the-art Denon Solutions for Maximizing Content Quality
Robust power source for each block, for stable supply of current
To produce a clear, stable power circuit that prevents unwanted noise from affecting
the sound, the AVR-989P has dedicated CPU and Standby transformers that are
separate from the audio and video circuitry. The AVR-989P is endowed with a
powerful rectifier circuit with 15,000µF block capacitors and a bridge diode of 8A
capacity, surpassing typical models in this price range, to supply stable current with
negligible noise.
Minimum Signal Path
The “simple and straight” design concept has been thoroughly implemented in the
signal paths to contribute to immaculately clean audio and video playback.
Signal paths are as short as possible to keep signal degradation in the audio and
video circuitry to an absolute minimum.
Direct Mechanical Ground
Vibration-resistant construction has been reviewed to thoroughly suppress the
adverse influences of vibration on sound quality.
The power transformers, a source of vibration, have been securely mounted on the
highly rigid bottom-chassis.
Direct mounting of cast-iron feet to the radiator in near proximity to each other serves
to suppress mutual vibration with the power transformers and other sources of
vibration.
Compressed Audio Restorer
Denon’s new audio technology for MP3/WMA/AAC compressed audio formats
restores higher frequency sounds, along with rich, deeper bass.
Connectivity & Future-ready expandability
• Power amplifier assign for zone 2
• Remote in / out
• 2-way remote ready
- (optional: DENON RC-7000CI/RC-7001RCI)
www.d-mpro.com/avr989p
AVR-989P
Ease-of-use
Audyssey Dynamic Volume, for real-time volume adjustment
Large changes in volume sometimes occur between documentaries where the sound is
mainly narrative and movies which often contain loud sound effects. Viewers often raise
the volume for documentaries to hear the narrative more easily but the turn it down again
when a commercial with loud sound effects comes on. They do this numerous times
during a program of this type. Audyssey Dynamic Volume constantly monitors the sound
sources and adjusts the volume to the optimum level for the particular source being heard
without sacrificing dynamic range.
The AVR-989P is also equipped with Audyssey MultEQ XT which measures the acoustic
characteristics of the room to obtain the optimum acoustic effects, and Dynamic EQ which
reproduces the high and low range with the optimum acoustic effect during low volume
levels. Dynamic Volume combines these two functions to achieve maximum performance.
Audyssey MultEQ XT Auto setup and Room EQ
Tower type microphone for more accurate measuring
Specifications
Power Amplifier Section
Rated output:
Front L/R:
*THD figures are power amp stage values
115 W + 115 W
(8 ohms, 20Hz-20kHz, THD 0.08%)
145 W + 145 W
(6 ohms, 1kHz, THD 0.7%)
115 W
(8 ohms, 20Hz-20kHz, THD 0.08%)
145 W
(6 ohms, 1kHz, THD 0.7%)
115 W + 115 W
(8 ohms, 20Hz-20kHz, THD 0.08%)
145 W + 145 W
(6 ohms, 1kHz, THD 0.7%)
115 W + 115 W
(8 ohms, 20Hz-20kHz, THD 0.08%)
145 W + 145 W
(6 ohms, 1kHz, THD 0.7%)
Center:
Surround L/R:
Surround Back L/R:
Up to eight measurement points
ALFC (Adaptive Low Frequency Correction) filtering for higher resolution processing in the
low frequency range.
2-line fluorescent display on front panel
Current status, such as the input source or audio format, is displayed in two lines. It is also
possible to check the name of the album or music track of the memory audio item or other
items without viewing the TV screen.
The 2-line display also makes it possible to easily change the settings without the OSD
(On-screen Display) on the TV monitor.
Three Quick Select Buttons
Auto setup, Auto Surround, Auto Signal Detection
Auto Surround Back Channels on for auto-detection of supporting sources
Auto Surround Mode
Audio Delay function (max. 6 frames or 200 msec)
Night mode for neighbor friendly listening
Muting level settings (Full / -40dB / -20dB)
Audio Level Memory, capable of correcting different signal levels for each input device
Volume Level Limiter, for setting maximum volume levels
Power-ON Volume Level Memory
Variable subwoofer crossover switching
Preamplifier Section
Input Sensitivity / Impedance:
Frequency Response:
200mV / 47 kohms
10Hz ~ 100kHz – +1, -3dB
(DIRECT mode)
100dB (IHF-A weighted, DIRECT mode)
S/N Ratio:
FM Section
Tuning Frequency Range:
Usable Sensitivity:
87.5 – 107.9 MHz
1.0 µV (11.2 dBf)
AM Section
Tuning Frequency Range:
Usable Sensitivity:
520 – 1710 kHz
18 µV
General
Power Supply:
Power Consumption:
Dimensions (w/o rack kit)
Width:
Height:
Depth:
Weight:
AC 120 V, 60Hz
6.0 A (Standby 0.1W)
434mm (17 3/32”) w/o rack kit
171mm (6 47/64”)
414mm (16 19/64”)
12.8Kg (28 lbs, 3.5 oz)
PLEASE NOTE: Specifications are based on measurement conditions and proper care for the
machine, and are subject to change without notice.
Inputs/Outputs
D&M Professional
1100 Maplewood Drive Itasca, Illinois 60143
Tel: 630.741.0330 Fax: 630.741.0652
www.d-mpro.com
© 2008 D&M Professional. All rights reserved.
IN
HDMI
Component
S-Video
Composite
Analog Audio (Tuner incl.)
Analog Ext. Input
Digital OPTICAL
Digital COAXIAL
4
3
7
7
10
7.1 ch
3
3
OUT
HDMI Monitor
Component Monitor
S-Video Monitor
REC
Composite Monitor
REC
Analog Audio REC
Zone 2
Audio PRE out (7.1 ch)
Digital OPTICAL
1
1
1
2
1
2
2
1
1
1
Others
Dock Control Port
Sirius Connector
XM Connector
FM Tuner Antenna
AM Tuner Antenna
Remote IN / OUT
RS-232c
Trigger Output (+12V, 150mA)
1
1
1
1
1
1
1
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement