Sharp R-200W User manual
Beam 200W Moving Head Light
FL-202 BEAM200W-F1000363
USER MANUAL
www.flash-butrym.pl
Page 1
Catalogue
I
II
HI
IV
V
VI
VII
VIII
IX
Warning……………………………………………….1
Statement……………………………………………….1
Safety Precautions………………………….…………..1
Technology Parameter………………………..………..2
Warning for Replace Lam…………………..…………3
Warning for Operation…………………………..……..4
Sketch map of Connection……………………………4
Menu Function……………………………………….……5
Channels Control……………………………………..……6
www.flash-butrym.pl
Page 2
The New moving head Beam FL-202, equipped with a revolutionary R5 190W
discharge lamp (8000 ˚ F, 2000 hrs.). This Beam FL-202 moving head has a light
output that is comparable to devices with 700W discharge lamps. Compact,
lightweight, very sharp and stream bright light, and with very attractive price that you
will never want to go back
Warning
To reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
Do not spill water or other liquids into or on
to your unit.
During long periods of non-use, disconnect the unit’s
main power.
It should be installed in a well-ventilated place,
at a distance of 50 centimeters or more with the walls.
At the same time, please check if the fan and ventilation holes are unobstructed.
Statement
The product has perfect performance and integrity packing. All users should be
strictly comply with the warning and operating instructions as stated. Or we aren’t in
charge of any result by misusing. Any damage resulting by misuse is not within the
company’s warranty. Any fault or problem caused by Note: All information is subject
to change without prior notice.
Safety Precautions
In order to guarantee the product’s life, please don’t put in the damp places or even
the environment over 40degress.
Always mount this unit
in safeand stable matter.
The qualified professionals are allowed to carry
out the lamp installation, operation and maintenance, but they must guarantee to
operate in strict accordance with the instructions referred to.
Using lamp, the change rate of Power voltage should
be within+10%, If the
voltage is too high, it will shorten
the light’s life; if it’s not enough, the lamp will be dark.
Please restart it after turning off light for 20 minutes until full-cooling. Frequent
switching will reduce the life span of lamps and bulbs; intermittent using will improve
the life of bulbs and lamps.
In order to make sure the product is used well, please read the Manual carefully
www.flash-butrym.pl
Page 3
FEATURES
High quality R5 190W discharge lamp (8000o F, 2000 hours)
Beam Angle 0-4*
Resetting the lamp on and off using the DMX512 signal
Extremely fast and precise movement
Electronic monitoring of the error message
Ultra compact design, light weight device (17.2 kg)
DYNAMIC EFFECTS
The color wheel (14 colors + white)
Gobo wheel (17 gobo + open)
Prism (8 - Wall rotary)
Dimmer (0-100%)
Electronic Focus
Frost
Strobe (0-20hz)
PAN: 540o
TILT: 240o
Speed control PAN, TILT DM
www.flash-butrym.pl
Page 4
CONTROL AND PROGRAMMING
1. Control of the market definition PAN and TILT (8bit or 16bit)
2. DMX 512: 16, 17 or 20 channels
3. and addressing settings: graphic LCD with back light
OPTICS
1. Viewing angle: 0-4*
2. 3 lenses
3. Electronic Focus
4. 8-wall rotating prism
5. The Power of Light: Light power: LUX: 142500 @ 10m, 84300 @ 15m
6. The color wheel (14 dichromate filter + white)
7. Gobo wheel (17 gobo + open)
EXECUTION
1. Aluminum construction with plastic
2. Two side handles for transportation
3. Two locking PAN and TILT speed for safe handling of the head
4. Degree of protection: IP20
INSTALLATION
1. Two handles for screw hooks
2. Indoor use only
3. Mounting head in any position
4. Minimum distance to illuminated surfaces: 3m
5. Keep a minimum distance from the surrounding area of the head: 0.5 m
CONNECTORS
1. Power connector IN: Neutrino Power Con
2. Mains connector OUT: Neutrino Power Con
3. DMX512 signal connector: 3-pin XLR (IN, OUT), and 5-pin XLR (IN, OUT)
ELECTRICAL
1. Power supply: AC 110V - 240V, 50/60Hz
2. Maximum power consumption: 360W
3. Protection: F7AL
ACCESSORIES INCLUDED
1. Power-Con power cable IN (blue connector)
2. Power-Con power cable OUT - Extension (gray connector - blue connector)
3. DMX512 cable - XLR 3pin (2p)
4. DMX512 cable - XLR 5pin (2p)
5. Brackets for attaching the head to the structure (2p)
6. User manual
USEFUL INFORMATION FOR ORDERING
Packaging (1 pc): 470x380x550mm
Gross Weight: 18.8 kg
www.flash-butrym.pl
Page 5
V Warning for Replace bulb
VI Warning for Operation
VII Sketch map of DMX XLR Connection
Building a serial DMX chain:
1.Connect the DMX output of the first fixture in the DMX chain with the DMX input of the next
fixture. Always connect one output with the input of the next fixture until all fixture are connected
2.Caution:At the last fixture, the DMX cable has to be terminated with a terminator. Solder a 120
0 resistor between
signal (-) and Signal (+) into a XLR plug and plug it in the DMX output of the last fixture
1.
www.flash-butrym.pl
Page 6
Channel
16ChannelMode
Color Wheel
17ChannelMode
Color Wheel
20Channel Mode
Color Wheel
Stop/Strobe
Stop/Strobe
Stop/Strobe
3
Dimmer
Dimmer
Dimmer
4
Gobo Wheel
Gobo Wheel
Gobo Wheel
5
Prism
Prism
Prism
6
7
Prism Rotation
Prism Rotation
Prism Rotation
Function
Function
Function
8
Frost
Frost
Frost
9
Focus
Focus
Focus
10
X
X
X
11
12
X fine
X fine
X fine
Y
Y
Y
13
Y fine
Y fine
Y fine
14
Macro Function
Macro Function
Macro Function
15
Reset
Reset
Reset
16
Lamp on/off
Lamp Control
Lamp Control
X,Y speed
200 - 250
X,Y speed
Color Wheel Speed
1
2
17
18
19
Fast to slow
___________
Fast to slow
20
www.flash-butrym.pl
___________
150 - 250
Gobo Wheel Speed
Page 7
Channel
Function
DMX Value
196 - 255
188 128 -
195
187
124
120
116
111
107
CH1
CH2
Color wheel
Strobe
www.flash-butrym.pl
103
99
94
90
86
82
77
73
69
64
60
56
52
47
43
39
35
30
26
22
18
13
9
5
0
250-255
240-249
230-239
220-229
210-219
200-209
192-199
167-191
161-166
136-160
128-135
72-127
64-71
Feature
Color wheel counterclockwise
rotation, Slow-Fast
Stop
Patter clockwise rotation, fastSlow
Blue+White
Blue
CTB8000+Blue
CTB8000
CTO190+CTB8000
CTO190
CTO260- CTO190
CTO260
Cyan+CTO260
Cyan
Meganta+ Cyan
Meganta
Yellow+Meganta
Blue
Pink+Yellow
Green
Lavender+Pink
Lavender
Light Green+Lavender
Light Green
Green+Light Green
Green
Aquamarine+Green
Aquamarine
Orange+Aquamarine
Orange
Red+Orange
Red
White+Red
White
Open
Random fast strobe
Random medium strobe
Random slow strobe
Strobe effect2
Strobe effect1
Open
Fade Strobe, Slow-Fast
Open
Fade Strobe, Slow-Fast
Open
Pulse Strobe, Slow-Fast
Open
Note
linear
Single-Step
linear
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Linear
Single-Step
Linear
Single-Step
Linear
Single-Step
Page 8
CH3
8-63
2-7
0-1
250 - 255
249 - 244
Strobe, Slow-Fast
Open
Close
Gobo 16 Shake, Slow-Fast
Gobo 15 Shake, Slow-Fast
Linear
Single-Step
Single-Step
Linear
Linear
237 231 224 218 212 205 199 192 186 180 173 167 160 118 -
Gobo 14 Shake, Slow-Fast
Gobo 13 Shake, Slow-Fast
Gobo 12 Shake, Slow-Fast
Gobo 11 Shake, Slow-Fast
Gobo 10 Shake, Slow-Fast
Gobo 9 Shake, Slow-Fast
Gobo 8 Shake, Slow-Fast
Gobo 7 Shake, Slow-Fast
Gobo 6 Shake, Slow-Fast
Gobo 5 Shake, Slow-Fast
Gobo 4 Shake, Slow-Fast
Gobo 3 Shake, Slow-Fast
Gobo 2 Shake, Slow-Fast
Gobo counterclockwise
rotation, Slow-Fast
Stop
Gobo clockwise rotation,
Slow-Fast
Gobo 17
Gobo 16
Gobo 15
Gobo 14
Gobo 13
Gobo 12
Gobo 11
Gobo 10
Gobo 9
Gobo 8
Gobo 7
Gobo 6
Gobo 5
Gobo 4
Gobo 3
Gobo 2
Gobo 1
White Color
Prism inserted
Prism excluded
clockwise rotation, Slow-Fast
Stop
counterclockwise rotation,
Slow-Fast
0˚-540˚
unused
Frost, Strobe-Weak
Linear
Linear
Linear
Linear
Linear
Linear
Linear
Linear
Linear
Linear
Linear
Linear
Single-Step
Linear
243
236
230
223
217
211
204
198
191
185
179
172
166
159
114 - 117
72 - 113
CH4
CH5
Gobo Wheel
Prism
CH6
Prism rotation
CH7
CH8
Function
Frost
www.flash-butrym.pl
68 - 71
64 - 67
60 - 63
56 - 59
52 - 55
48 - 51
44 - 47
40 - 43
36 - 39
32 - 35
28 - 31
24 - 27
20 - 23
16 - 19
12 - 15
08 - 11
04 - 07
0 - 3
128 - 255
0 - 127
193 - 255
191 - 192
128 - 190
0 - 127
0 - 255
0 - 255
Single-Step
Linear
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step
Linear
Single-Step
Single-Step
Single-Step
Linear
Linear
Page 9
CH9
CH10
CH11
CH12
CH13
Focus
X
X Fine
Y
Y Fine
CH14
Macro Function
CH15
CH16
CH17
Rest
Lamp on/off
X/Y Speed
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
25 - 255
12 - 24
0 - 11
128 - 255
Focus, Far-close
77 - 127
X/Y Rest
26 - 76
0 - 25
Effect reset(Color Wheel,
Gobo wheel, Prism etc.)
Nothing
101 - 255
Lamp On
26 - 100
Lamp Off
0 - 25
251 - 255
0 - 250
0- 5
Nothing
Fastest
Fast - Slow
Fastest
Pan rotation 0˚-540˚
Pan Fine rotation 0˚-2.12˚
Tilt rotation 0˚-540˚
Tilt Fine rotation 0˚-098˚
Nothing
Run the built-in test program
Nothing
Reset
Linear
Linear
Linear
Linear
Single-Step
Single-Step
Single-Step
Single-Step
Single-Step(Delay 5
Second)
Single-Step(Delay 5
Second)
Single-Step(Delay 5
Second)
Single-Step(Delay 5
Second)
Single-Step(Delay 5
Second)
Single-Step
Linear
Single-Step
F1000363
www.flash-butrym.pl
Page 10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement