LIP-8002E/LIP
LIP-8002E/LIP-8002AE
Quick Guide
The contents of this document are subject to revision without notice
due to continued progress in methodology, design and manufacturing.
Ericsson-LG Enterprise shall have no liability for any error or damage
of any kind resulting from the use of this document.
iPECS is an Ericsson-LG Brand
Part No. MMBB9236402 / ISSUE 1.2
Printed in Thailand
www.ericssonlg-enterprise.com
© Ericsson-LG Enterprise Co., Ltd. 2011
Please read this manual carefully before operating your set.
Retain it for future reference.
LIP-8002E/2AE Quick Guide
ST
Important Safety information
To prevent the risk of harm to the user or damage to equipment, please read this
information before installing or repairing the phone.
1. Only trained and qualified service personnel should install, replace or service the phone.
2. Don’t spill liquid (ex. Water) on the phone. In case of spill, contact your service
technician for assistance to avoid fire or electric shock.
3. If you see smoke or smell something burning, unplug the power cord and the phone line.
Call your service technician for assistance.
4. Don’t use the phone during a thunderstorm. Lightning strike may result in a fire, severe
electrical or acoustic shock.
5. Don’t tug the power cord or the phone line. This may result in a fire, an electric shock or
equipment damage.
6. Ensure that children do not pull on phone cords. This may injure children or result in
equipment damage.
7. The ear-piece houses a magnetic device which may attract pins or small metal objects.
Keep handset clear of such objects and check before use.
8. Avoid placing the phone in an area that is dusty, damp or subject to vibration.
9. Choose a site that is dry and well ventilated.
10. Don’t put the heavy things on the phone.
11. Do not drop or throw the phone.
12. Static electricity discharge will damage electronic components.
13. Keep out of direct sunlight and away from heat.
14. Clean the phone with a soft, dry cloth only. Do not use volatile liquids such as petrol,
alcohol or acetone as this may cause a fire or result in discoloration or damage to
plastics. Do not clean with wax or silicon products as these may enter the equipment and
cause operation to become unreliable.
15. No user serviceable parts inside. Do not inset a screw driver or any metal objects into
the phone. This may cause electric shock or damage the equipment and will render the
warranty void.
1
LIP-8002E/2AE Quick Guide
ST
Regulatory information
European Union Declarations of Conformity
Ericsson-LG Enterprise Co., Ltd. declare that the equipment specified in this document bearing the
“ CE” mark conforms to the European Union Radio and Telecommunications Terminal Equipment
Directive(R&TTE 1999/5/EC), including the Electromagnetic Compatibility Directive(2004/108/EC) and
Low Voltage Directive(2006/95/EC).
Copies of these Declarations of Conformity (DoCs) can be obtained by contacting your local sales
representative.
FCC/IC Interference Statement : USA / CSA
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 /RSS-GEN of the FCC/IC rules. Operation is subject to the following
two conditions:
(1)This device may not cause harmful interference; and (2) This device must accept any interference
received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The use of this device in a system operating either partially or completely outdoors may require the user
to obtain a license for the system according to the Canadian regulations.
CAUTION : Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority to operate the
equipment.
2
LIP-8002E/2AE Quick Guide
ST
Disposal of Old Appliance
When the displayed symbol (crossed-out wheeled bin) is adhered to a product, it designates
the product is covered by the European Directive 2012/19/EC.

All electric and electronic products should be disposed of only in
special collection facilities appointed by government or
local/municipal authorities.

The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and human
health.

For more detailed information about disposal of your old
appliances, please contact your city office, waste disposal service
or the place of product purchase.
Copyright© 2011 Ericsson-LG Enterprise Co., Ltd. All Rights Reserved
This material is copyrighted by Ericsson-LG Enterprise Co., Ltd. Any unauthorized
reproductions, use or disclosure of this material, or any part thereof, is strictly
prohibited and is a violation of Copyright Laws. Ericsson-LG Enterprise reserves the
right to make changes in specifications at any time without notice. The information
furnished by Ericsson-LG Enterprise in this material is believed to be accurate and
reliable, but is not warranted to be true in all cases.
3
LIP-8002E/2AE Quick Guide
ST
LIP-8002E/8002AE
The Ericsson-LG Enterprise IP phone (LIP-8002E/8002AE) is Internet Protocol (IP) phones
designed to support hosted telephony services over a managed IP network.
The LIP-8002E/8002AE Phone has fixed feature buttons, flexible buttons that are configurable,
and dial pad buttons as shown in the figure below.
Fixed Feature Button Definitions
DND – Blocks all incoming calls. Toggle to activate.
Speed – Access speed dialing, speed programming.
Vol   – Adjusts volume for ringing, headset, and speakerphone; adjusts LCD brightness (in
idle state).
Trans/PGM –Initiates call transfer, or enters programming mode.
Hold / Save – Places active call on hold or saves programming information.
Speaker – Toggle to activate.
Call Back – Initiates call back request when calling a busy station; call is completed when
busy station returns to idle status.
Flexible buttons – Some are system pre-programmed for line appearance, and some are
user programmable.
Ring/MSG Indicator – Illuminates when ringing, or message waiting.
LCD Display – Phone interface for status, dialing directories, and text message information.
Hands-free Microphone – Used for hands-free speakerphone function.
4
LIP-8002E/2AE Quick Guide
ST
LIP-8002E/8002AE Keyset User Operation
The following is provided as quick reference for commonly used features/functions.
Complete instructions are included in the User Guide.
Placing a Call:
Internal Station to Station Call –
 Lift handset or press SPEAKER button.
 Dial the extension number from the keypad.
External Call –
 Lift handset or press SPEAKER button.
 Press CO/IP line, or dial access number.
 Dial desired phone number.
Using Camp-On (Call-Wait):
 When calling a busy Station, press *.
 Wait for party to answer.
(iPECS-CM/MG)
 Call a busy Statoin.
 Press [TRANS/PGM] button and dial Camp-On Register Code.
To retry a busy external number until answered:
 When placing an outgoing call to a busy party, press the REDIAL button if it has been
registered as flexible key.
 Hang-up handset; the call will be retried until the call is connected or the feature is
cancelled.
(iPECS-CM/MG)
 When placing an outgoing call to a busy party, press the CALL BACK button.
 Hang up handset; the call will be completed when busy party returns to idle state.
5
LIP-8002E/2AE Quick Guide
Delete Auto Call Number Redial (ACNR):
 Press the REDIAL button if it has been registered as Flexible key.
(iPECS-CM/MG)
 When placing an outgoing call to a busy party, press the CALL BACK button.
Answering a Call while idle:
Internal Station to Station Call –
 Lift handset, or if in HF mode, just speak.
External Call –
 Lift handset.
(iPECS-CM/MG)
 Lift handset, and press flashing Flex button (as needed).
Using Do Not Disturb (DND):
 Press the DND button (toggles ON and OFF).
Pickup a Call to another Station:
 Lift handset.
 Dial Directed Call Pick-up Code.
 Dial the intercom number of the ringing station.
Pickup a Call from another Station in your Group:
 Lift the handset.
 Dial Group Call Pickup code.
6
ST
LIP-8002E/2AE Quick Guide
ST
Conference:
A Conference flex button should be programmed.
 Place a call to first member.
 If first member answers, press Conf flex button and place a call to second member.
 If last member answers, press Conf flex button, twice.
* For conference more than 4 members in iPECS-LIK system, MCIM board is needed.
(iPECS-CM/MG)
 Place a call to first member.
 If first member answers, press Conference flexible button and place a call to second
member.
* For conference with more than 4 members, VPCM board is needed in iPECS-CM.
* For conference members, VOIB (VOIU) board is always needed in iPECS-MG.
Call Hold:
 Press the HOLD button while on a CO call.
 Press the CO button or Loop button to rejoin call.
Call Forward:
A Call forward flex button should be programmed.
 Lift Handset or press SPEAKER button.
 Press DND button.
 Dial the type of forward code (0-5, SBG: 0-4).
1=Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer, 5=Incoming CO Off-net
(Attendant only), 0=remote
 For Forward code 1-4, dial destination number.
 For Forward code 5, press CO/CO-Group button, and dial Speed number.
 For Forward code 0, dial password of forwarded station and enter the Forward code (1-4).

1=Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer.
 Dial the destination number.
(iPECS-CM/MG)
 Press SPEAKER on and DND button.
 Dial the type of forward code (0-4).
7
LIP-8002E/2AE Quick Guide
1=Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer , 0=Remote
 For Forward code 1-4, dial destination number and press * or the SAVE button.
 For Forward code 0, press * or the SAVE button.
 Dial forwarded station number, password and *.
 Dial the destination number.
Delete Call Forward:
 Lift Handset or press SPEAKER button.
 Press DND button.
 Dial #.
(iPECS-CM/MG)
 Press SPEAKER and DND button, if call forward is registered.
Call Transfer:
 While on an active call, press the TRANS/PGM button.
 Place call to the transfer destination.
 Remain on the line to announce the call and/or hang-up to complete the transfer.
Storing Speed Dial Numbers:
 Press the TRANS/PGM and Speed button.
 Dial Speed bin number.
 Press CO button or dial CO access code. (In case of SBG, this step is not needed)
 Dial telephone number you wish to store.
 Press the Hold button.
 Enter the name associated to the number.
 Press the Hold button; a confirmation tone will be heard.
(iPECS-CM/MG)
 Press the SPEED and TRANS/PGM button.
 Dial Speed bin number.
 Dial CO access code and telephone number you wish to store.
 Press the Hold button.
8
ST
LIP-8002E/2AE Quick Guide
ST
 Enter the name associated to the number.
 Press the Hold button; a confirmation tone will be heard.
Using Speed Dial Numbers:
 Press the Speed button.
 Dial the desired Speed dial bin number.
LIP-8002E/LIP-8002AE Installation
Note: LIP-8002E/8002AE IP-Phone can be powered by either AC adaptor or Power over
Ethernet (PoE, class 1). To use AC power, use only the Ericsson-LG Enterprise Approved AC
power adaptor, which you can order separately. To use PoE, your connected LAN must support
PoE.
<Important> Use either PoE or AC adaptor, not both, for power supply of your phone.
1. Plug one end of the supplied LAN cable into the LAN Ethernet port on the back of your IP
phone marked with the
symbol.
2. Plug the other end of the cable into your LAN Ethernet connection. (Do not extend the LAN
Ethernet cable to the outside of the building.)
3. (Optional) If you are connecting your PC Ethernet through the IP Phone, plug one end of the
LAN Ethernet cable into the PC Ethernet port on the back of your IP Phone marked with the
symbol.
<Important> Skip the following procedures from 5 to 6 if PoE is used for
power supply of your phone.
4. (Optional) Plug the other end of the cable into your LAN Ethernet connection of your PC.
5. (Optional) Connect the AC power adapter (not supplied) to the AC adapter jack on the back of
your IP Phone. Fasten the cord with a hook to prevent it from being disconnected.
6. (Optional) Plug the AC power adapter into the nearest AC power outlet. The phone will start
up.
7. (Optional) for the wall-mounting, sleeve of the CAT5 cable should be moved backward to
prevent it from protruding.
9
LIP-8002E/2AE Quick Guide
ST
Flex Button Program
 Press the TRANS/PGM button.
 Press the flexible button to be programmed.
 Press TRANS/PGM button and User Program Code (refer to the following table).
 Press the HOLD/SAVE button.
(iPECS-CM/MG)
1) To assign Fixed or Number
 Press the TRANS/PGM button.
 Press the flexible button to be programmed.
 Press program type (1: Fixed button, 2: Number, 0: Delete).
 Choose the desired fixed button type (PTT, REDIAL, MUTE, CONFERENCE, ..) with
volume up and down button if the program type is Fixed button, or
 Enter Number to dial if the program type is Number.
 Press the HOLD/SAVE button.
2) To assign User Program Code
 Press the TRANS/PGM button
 Press the flexible button to be programmed
 Enter Program Mode Code and User Program Code (refer to the table)
 Press the HOLD/SAVE button to save.
System User Program Codes (LIK)
Code
Function
Remark
10
Enblock Mode Dialing
11
Intercom Ring
Select Ring Tone 1-8
12
CO/IP Ring
Select Ring Tone 1-8
13
Intercom Answer Mode
14
Call Coverage Attribute Setting
1:ON/OFF, 2:Ring Delay (0-9)
15
Station Ring Download
Ring Tone 5-8
19
Ear & Mic. Headset
21
Knock Down STA COS
Select ICM Signal mode, 1:HF, 2:Tone,
3:Privacy
22
Restore Station COS
Requires Auth Code
23
Walking COS
Requires Auth Code
30
VM Mobile Notify
31
Station Wait Retrieve
32
CLI/IP Message Wait Retrieve
10
LIP-8002E/2AE Quick Guide
Code
ST
Function
33
Authorization Code (Password) Entry
34
DID Call Wait Button
35
Message Wait in Exec/Sec Pair
36
Send SMS Message
37
Register Mobile Ext.
38
Activate Mobile Ext.
39
Register Mobile Ext. CLI
Remark
Input up to 12 digits
41
Set Wake Up Time
42
Erase Wake-Up Time
51
Custom/Pre-defined Message Display
52
Register Custom Message (Message 00)
53
Create Conf. Room
54
Delete Conf. Room
55
Monitor Conf-Group
61
Headset/Speakerphone
62
Headset Ring Mode
71
LCD Display Mode
72
Version Display
73
Background Music
74
Station Name Reg.
75
Display Phone IP Address
76
Change Phone IP Address
77
Display Phone MAC IP Address
79
Display Phone Version
80
RECORD Button
81
ISDN CLIR Button
82
ISDN COLR Button
84
Account Code Button
85
LOOP Button
86
ATD Intrusion Button
87
ICM Button
88
Camp-On Button
89
Keypad Facility Button
8#
OHVO Button
91
CONF Button
94
FLASH Button
95
MUTE Button
96
MONITOR Button
97
REDIAL Button
98
FWD Button
99
PTT Button
9*
In Room Indication Button
*0
Hot Desk Login Code
**
Hot Desk Logout Code
*7
Force Fwd to Destination
Input time, 24-hr clock
Input up to 24 characters
1:Speakerphone, 2:Headset, 3:Both
Requires VSF/External SMDI VM
Requires room number(01~10)
11
LIP-8002E/2AE Quick Guide
ST
System User Program Codes (iPECS SBG)
Code
Function
Remark
11
Intercom Answer Mode
Select ICM Signal mode, 1:HF, 2:Tone, 3:Privacy
12
Headset/Speakerphone mode
0:H, 1:S
13
Select Headset Ring type
1:S, 2:H, 3:Both
21
Set Wake-Up Time
Once/Permanent & Hour/Min
22
Erase Wake-Up Time
31
LCD Display Language
32
Sys version display
33
Select BGM source
(0~1)
34
Station Name registration
Station Name
35
Display Phone IP Address
36
Display Phone MAC Address
37
Display Phone Version
38
Network Configuration
41
Forced Forward to Destination
42
Call Log Display
43
CLIR Service
44
COLR Service
Domestic/English
Station Group Number
4*
LOOP button
Button PGM only
50
CALLBACK button
Button PGM only
51
CONF button
Button PGM only
52
MUTE button
Button PGM only
53
ICM button
Button PGM only
54
REDIAL button
Button PGM only
12
LIP-8002E/2AE Quick Guide
ST
System User Program Codes (iPECS-CM/MG)
Code
11
12
13
Function
Remark
Answer Mode(H/T/P)
Station Name Program
Select ICM Signal mode, 1:HF, 2:Tone, 3:Privacy
Input up to 12 characters
Set Wake Up
iPECS-CM:
Index(1-5) + Type(1~5, 1:Once, 2:Daily, 3:Mon~Fri,
4:Mon~Sat, 5:Date), + HHMM(24-hour clock) +
YYMMDD(If type is Date)
iPECS-MG:
HHMM(24-hour clock), # (repeat mode: once, repeat)
iPECS-CM:
Index(1-5)
14
15
Reset Wake Up
Language Program
iPECS-MG:
1:ON/OFF, 2:Ring Delay (0-9)
00 - 17
16
LCD Date Mode Change
DD/MM/YY or MM/DD/YY
17
18
LCD Time Mode Change
Set Back Light
12 Hour/24 Hour
Not supported
21
ICM Ring Type Program
22
23
CO Ring Type Program
Ring Download
5-8+0-9
24
31
Set BGM
Temporary COS Mode
Not Supported
Auth. Code required
32
Retrieve COS
Auth. Code required
33
34
Walking COS
Register Password
Auth. Code required
Auth. Code required
35
Call Log Protect
Auth. Code required
36
41
SMS Message Protect
Preselected MSG PGM
Auth. Code required
0-9, MSG / *: User Custom # Deactivation
42
43
Set User Message
Send SMS MESSAGE
44
Received SMS MESSAGE
51
52
Mobile-Ext. Enable
Mobile-Ext. Number PGM
1-5
1-5
53
Mobile-Ext. CLI PGM
1-5
54
55
Create Conference Room
Delete Conference Room
61
62
Speaker/Headset PGM
Headset Ring Program
71
Register Station ICLID
72
81
View Station ICLID
View IP Address
82
View Mac Address
83
80
View Keyset Version
Network Setting
91
92
MPB Version Display
View IP Address
Speaker/Headset
Speaker/Headset/Both
Not used in CM
Not used in CM
13
LIP-8002E/LIP-8002AE
Quick Guide
The contents of this document are subject to revision without notice
due to continued progress in methodology, design and manufacturing.
Ericsson-LG Enterprise shall have no liability for any error or damage
of any kind resulting from the use of this document.
iPECS is an Ericsson-LG Brand
Part No. MMBB9236402 / ISSUE 1.2
Printed in Thailand
www.ericssonlg-enterprise.com
© Ericsson-LG Enterprise Co., Ltd. 2011
Please read this manual carefully before operating your set.
Retain it for future reference.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement