TP-LINK Archer D5 Wireless Modem Router Quick Installation Guide
Below you will find brief information for Wireless Modem Router Archer D5. The Archer D5 is a dual-band wireless modem router that provides a high-speed internet connection for your home. It features two wireless bands, 2.4GHz and 5GHz, allowing you to connect multiple devices simultaneously. The Archer D5 also has a built-in ADSL modem, making it easy to connect to your DSL internet service.
PDF
Download
Document
Advertisement
Advertisement
TP-LINK The Reliable Choice Quick Installation Guide AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router Please select the appropriate setup wizard. CD Setup Wizard For Windows users only Web-based Quick Setup Wizard For users unable to run the resource CD MODEL NO. Archer D5 FAL Package Contents Resource CD Archer D5 Power Adapter (Only for Windows) О! in Ethernet Cable ADSL Splitter Phone Cable x 2 Necessary Information For a smoother setup, we suggest you consult your ISP for the following information first. The information will be necessary during the configuration stage. vPINCI — Connection Type: Encapsulation Type (Optional): Web-based Quick Setup Wizard ( For users unable to run the resource CD) E Connect your devices step by step following the figure. [=] Phone Cable - À ЭМП Splitter PHONE MODEM | Si Nora Cable 7106504755 REV1.0.0 Wall Socket CD © d Power ON/OFF Button WRI45 Computer Ethernet Cable § » CD Setup Wizard ( For Windows users only) E Insert the TP-LINK Resource CD into the CD-ROM drive. 4 T Setup Wizard Wireless ADSL2+ Modem Router ы м The Reliable Choice Note Follow the pop-up flash video to connect your devices, then click 8 to continue. Please check the LEDs (especially the ADSL LED). Then click NEXT and follow the step-by-step instructions until you complete the configuration. TP-LINK The Reliable Choice A LED Indicator Description . Pl look hthe table below to check if your modem router | d Install ADSL Device correct у. ` 7 E Configure ADSL Device. MESES — OU (Power) O The modem router is powered on. ADSL line is synchronized and ready to use Confirm Settings On 5 “E (ADSL) PTE Flash = The ADSL negotiation is in progress. 5 (WLAN) On | Wireless is enabled. LI (LAN) On The device connected to this LAN port is enabled. If the LED j h connection. Otherwise, please click MEXT to continue. NEXT EXIT For the advanced configurations, please refer to the User Guide on the Resource CD provided. Press the power ON/OFF button of your modem router 4 Open your browser and type in http://tplinkmodem.net in the address field, then press Enter. Use the default user name admin and password admin to log into the Web-based management page. and make sure the LEDs (especially the ADSL LED) display as shown below. gr Y LJ ft LAN: Solid light N + — WLAN: Solid light 2 +] =+— ADSL: Solid light or flashing | + POWER: Solid light Set your computer to Obtain an IP address / DNS server address automatically. For details, please refer to T1 in Troubleshooting. À Archer D5 - Microsoft Internet Explorer File Edit View Favorites Tools Help © Back 7 © [x] [2] A SD Search Sie Favorites Address le] http://tplinkmodem.net | Ww Go TP-LINK £ admin # ss... Copyright © 2014 TP-LINÉ Technologies Co, Ltd, All rights reserved, < > Click Quick Setup in the main menu and then click Next to start the configuration. Operation Mode Network This guide will help you set basic parameters for Internet connection. Please click NEXT to continue. For function or parameter details, please select the corresponding menu options on the left. DHCP Server Dual Band Selection Wireless 2.4GHz | Next | Web-based Quick Setup Wizard ( For users unable to run the resource CD) 6 Select your Region and Time Zone from the drop-down list, and then click Next. Please select your region and time zone. Region United States Y Time Zone (GMT) Greenwich Mean Time; Dublin, Edinburgh, London, Lisbon У ме [о Select Yes and then click Next to detect the connection type. Quick Setup - Auto Detection Auto-Detect Connection Type: This Setup Wi detect the type of | you have. Do you want The Smart Setup Wizard to try and detect The connection type now? O Yes. © No. | want to configure The Internet Connection myself. Ifthe connection type can not be detected, please EH select No... to configure it manually. Troubleshooting T1. How can | set my computer to Obtain an IP address / DNS server address automatically? For Mac OS X 1) Click the Apple icon on the upper left corner of the screen. 2) Goto “System Preferences -> Network". 3) Select Airport on the left menu bar, and then click Advanced for wireless configuration; or select Ethernet for wired configuration. 4) Inthe Configure IPv4 box under TCP/IP, select Using DHCP. 5) Click Apply to save the settings. For Windows 7 1) Click “Start -> Control Panel -> Network and Internet -> View network status -> Change adapter settings”. 2) Right-click Wireless Network Connection (or Local Area Connection), and then click Properties. 3) Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties. 4) Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK. For Windows XP 1) Click “Start -> Control Panel -> Network and Internet Connections -> Network Connections”. 2) Right-click Wireless Network Connection (or Local Area Connection), and then click Properties. 3) Select Internet Protocol (TCP/IP), and then click Properties. 4) Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK. For Windows 8 1) Move your mouse to the lower right corner and click the Search icon in the Popups. 2) 3) 4) 5) Here we use PPPoE as an example. Enter the Username and Password provided by your ISP, and then click Next. Auto-detection has succeeded! DSL PVC: 8/35 Encapsulation Mode: LLC Connection Type: PPPoE Please enter the Username and Password. If the Username/Password are unknown, please contact your ISP. Username: Password: Confirm password: Back | | Next | LL | Record the information here; Username: Password: E You can rename your 2.4GHz wireless network and change its password on this page. The default wireless network name(SSID) is TP-LINK_2.4GHz_XXXXXX, and the default wireless password, the same as the PIN code, is printed on the bottom label. Click Next to continue. Quick Setup - Wireless 2.4GHz Wireless: © Enable © Disable Wireless Network Name: TE-LINK 2.4GHz Channel: Auto a (Also called SSID) Mode: |11bgn mixed = Security: © WPAMWPA2-Personal (Recommended) Password 12345670 (Enter ASCII ch t 4) © Disable Wireless Security Back Next Go to Apps, type Control Panel in the search box and press Enter. Go to “Control Panel -> View network status and tasks > Change adapter settings”. Right-click Ethernet, select Properties. Then double-click Internet Protocol Version 4 (TCP/IPv4). Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK. T2. What can | do if | cannot access the Internet? 1) 2) 3) 4) 5) Check your cables and make sure they are all plugged in correctly, including the telephone line, Ethernet cables and power adapter. Check to see if you can log on to the Web-based management page of the modem router. The default address of the Web-based management page is http://tplinkmodem.net. If you can, try the following steps. (If you can not, please refer to T1 to configure the TCP/IP Properties and then try to access the Internet again.) Consult your ISP and make sure all the VPI/VCI, Connection Type, account username and password are correct. If they are not, please replace them with the correct settings and try again. If you still cannot access the Internet, please restore your modem router to its factory default settings and reconfigure your modem router following the instructions in this QIG. Please contact our Technical Support if the problem still exists. T3. How can | restore my modem router's configuration to its factory default settings? Once the modem router is reset, the current settings will be lost and you will need to reconfigure the modem router. We strongly suggest you back up 10 You can rename your 5GHz wireless network and change its password on this page. The default wireless network name(SSID) is TP-LINK_5GHz_XXXXXX, and the default wireless password, the same as the PIN code, is printed on the bottom label. Click Next to continue. Quick Setup - Wireless 5GHz Wireless: q Enable O Disable Wireless Network Name: TP-LINK_5GHZ (Also called SSID) Channel: Auto Mode: 11a/n/ac mixed a Security: © WPA/WPA2-Personal (Recommended) Password 12345670 (Enter ASCII ch I ] h ! 164.) o Disable Wireless Security Record your wireless information here: 2.4GHz SSID: 2.4GHz Security Password: 5GHz SSID: 5GHz Security Password: 11 Please confirm all the parameters. Click Back to modify them or click Save to save your settings. The Quick Setup is complete. Please confirm all parameters below. Click BACK to modify any settings or click SAVE to save and apply your configurations. Parameters Summary: Region: United States Time Zone: +00-00 DSL PVC: 0/32 Connection Type: PPPoA Username: username Password: | **** Wireless 2.4GHz: Enabled Wireless Network Name(SSID): TP-LINK_2.4GHz Channel: Auto Mode: 11bgn mixed Security. 1VPAWPA2-Personal Wireless Password: 12345670 Wireless 5GHz: Enabled Wireless Network Name(SSID): TP-LINK 5GHz Channel: Auto Mode: 11a/n/ac mixed Security. 1WPA/WPA2-Personal Wireless Password: 12345670 Back Save 12 The Quick Setup has completed. Click Finish to make your settings take effect. The basic settings for your modem router are completed. Please open the web browser and try to log on to http://www.tp-link.com to test your Internet connection. A For the advanced configurations, please refer to the User Guide at http://www.tp-link.com. the current settings before resetting the modem router. For more Backup information, please refer to 4.23.6 Backup 8: Restore on the User Guide. With the modem router powered on, use a pin to press and hold the RESET button on the rear panel for 8 to 10 seconds before releasing it. T4. 1) 2) T5. — TPTFF POWER LAN4/WAN LANS LANZ LAN1 ON/OFF POWER Use e RESET ` 7 = What can | do if | forget my password? For default wireless password: Please refer to the “Wireless Password/PIN” labeled on the bottom of the modem router. For the web management page password: Reset the modem router first and then use the default user name and password: admin/admin. How can | configure the USB features? Please refer to our Application Guides. They can be found on the resource CD and on the web. [m] a [m] 1) Note CD Access: Open the “Application Guide” folder on the resource CD. The application guides can be found inside this folder. Web Access: http://www.tp-link.com/app/usb Technical Support contact information, please log on to our Technical Support website: For more details about Troubleshooting and [=] т http://www.tp-link.com/en/support =) a = Technical Support № For more troubleshooting help, go to http://www.tp-link.com/en/support/faq № To download the latest Firmware, Driver, Utility and User Guide, go to http://www.tp-link.com/en/support/ For all other technical support, please contact us by using the following details: Global Australia / New Zealand Tel: +86 755 2650 4400 Tel: NZ 0800 87 5465 (Toll Free) Fee: Depending on rate of different AU 1300 87 5465 (Depending on 1300 policy.) carriers, IDD. E-mail: [email protected] (Australia) E Er E eek [email protected] (New Zealand) ' Service time: 24hrs, 7 days a week USA/Canada Singapore Toll Free: +1 866 225 8139 — Tel: +65 6284 0493 E-mail: [email protected] (USA) i ‚ . [email protected] (Canada) Fee: Depending on rate of different carriers. E-mail: [email protected] Service time: 24hrs, 7days a week He SF UK Service time: 24hrs, 7 days a week Tel: +44 (0) 845 147 0017 Ukraine Fee: Landline: 1p-10.5p/min, depending Tel: 0800 505 508 on the time of day. Mobile: 15p-40p/min, Fee: Free for Landline; Mobile: Depending on depending on your mobile network. EN EEE TEN E-mail: [email protected] Service time: 24hrs, 7days a week Service time: Monday to Friday, 10:00 to 22:00 = 0550 7244 488 (Turkish Service) Malaysia el: urkish Service —— Fee: Depending on rate of different carriers. Toll Free: 1300 88 875 465 E-mail: [email protected] E-mail: [email protected] All. St Service time: 09:00 to 21:00 , 7days a week Service time: 24hrs, 7days a week Brazil Poland Toll Free: 0800 608 9799(Portuguese Service) + Те!: +48 (0) 801 080 618 E-mail: [email protected] +48 223 606 363 (if calls from mobile phone) Service time: Monday to Friday, Fee: Depending on rate of different carriers. 09:00 to 20:00; Saturday, 09:00 to 15:00 E-mail: [email protected] Italy Service time: Monday to Friday, 09:00 to 17:00. Tel: +39 023 051 9020 GMT+1 or GMT+2 (DST) Fee: Depending on rate of different carriers. Switzerland EN Tel: +41 (0)848 800 998 (German Service) Service time: Monday to Friday, 09:00 to A в в я 13:00; 14:00 to 18:00 Fee: 4 8 Rp/min, depending on rate of different Indonesia E-mail: [email protected] Tel: (+62) 021 6386 1936 Service time: Monday to Friday, 09:00 to 12:30 Fee: Depending on rate of different carriers. and 13:30 to 18:00. GMT+ 1 or GMT+ 2 (DST) E-mail: support.idetp-link.com France ВОЙ Service time: Sunday to Friday, 09:00 to12:00, , 13:00 to 18:00 *Except public holidays Tel: 0820 800 860 (French service) Fee: 0.118 EUR/min from France Germany / Austria A - Email: [email protected] Tel +39 1802 NY (German Service) Service time: Monday to Friday, 09:00 to 18:00 +43 820 820 360 “Except French Bank holidays Fee: Landline from Germany: 0.14EUR/min. Russian Federation Tel: 8 (499) 754 5560(Moscow NO.) Landline from Austria: 0.20EUR/min. E-mail: [email protected] 8 (800) 250 5560 (Toll-free within RF) E-mail: [email protected] Service Time: Monday to Friday, 09:00 to Le and! 3:30 to 18:00. GMT+1 or GMT+2 Service time: From 09:00 to 21:00 (Moscow time) ( in Germany) *Except weekends and holidays in RF * Except bank holidays in Hesse TP-LINK TECHNOLOGIES CO., LTD. www.tp-link.com J ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Dual-band wireless
- Gigabit Ethernet
- ADSL2+ modem
- Web-based management
- Firewall protection
Frequently asked questions
Follow the steps in the Quick Installation Guide to set up your Archer D5. You can choose between the CD Setup Wizard or the Web-based Quick Setup Wizard.
The default username and password for the web-based management page are both "admin".
Press and hold the RESET button on the rear panel for 8 to 10 seconds to reset your Archer D5 to factory settings.
Connect the phone cable to the ADSL port on your Archer D5 and then connect the other end of the cable to your DSL modem. Ensure the ADSL LED is lit on the Archer D5.