Wisenet XRN-1620SB1 Quick Manual
Wisenet XRN-1620SB1 is a powerful network video recorder designed for security and surveillance. It supports 16 channels, allowing you to monitor multiple cameras simultaneously. Features include 4K recording, AI search, remote monitoring, and smartphone event alarms. You can easily manage your footage with the intuitive user interface, access multiple search modes, and set recording schedules. The recorder also supports P2P connection, allowing you to view live feeds or recorded footage from anywhere with an internet connection.
PDF
Download
Document
Advertisement
Advertisement
NETWORK VIDEO RECORDER Quick Guide XRN-1620B2/XRN-1620SB1/XRN-820S English Package Contents Features The product records video and audio from network cameras to a hard disk, and enables playback from the hard disk. It also provides remote monitoring environment for video and audio over the network using a remote computer. ● Provides new UI 2.0 ● Supports instant viewer ● Can be linked to AI camera ● Supports AI search (people, face, vehicle, license plate) ● Supports BestShot view ● Bookmark function ● Thumbnail function ● View camera event list in real time ● Convenient event rule setup ● Various sequence (layout, page) functions ● Extended search period ● Convenient log search ● Supports thermal imaging camera/PTZ linked camera ● Supports a range of 4K camera resolutions ● Outputs a 4K high definition image using HDMI ● Supports dual monitor output (expand, duplicate) ● Record and play video ● Record and play audio ● Supports ONVIF Profile S standard and RTP / RTSP protocols ● Display the HDD operation status by HDD SMART ● HDD overwrite enabled ● Function to export using USB memory and external hard disk ● Simultaneous play of 8, 16 channels ● View multi-channel time line when playing videos ● Various Search Modes (Time, Event, Smart, Text, Export, ARB) ● ARB support (configuration feature for saving period by channel) ● Various recording modes (Normal, Event, Scheduled Recording) ● Alarm Input / Output ● Remote monitoring function by Windows Network Viewer ● Live monitoring of the network camera ● Installation Wizard Function (Recorder, Web Viewer) ● Supports the smartphone remote monitoring feature by P2P support ● Provides smartphone event alarm (sending real-time event messages) ■ The appearance of the components may differ from the image shown. ■ Accessory category and quantity may differ depending on sales region. ■ For some regions, HDD is not pre-installed. HDD Fixing Screw, SATA Cable quantity vary depending on the model. XRN-1620SB1/XRN-1620B2 Recorder Mouse Power Cable Bracket Rack Quick Guide Terminal block HDD Fixing Screw (XRN-1620SB1: 16 ea / XRN-1620B2: 32 ea) CAUTION ● RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. ● Do not ingest battery, Chemical Burn Hazard. ● This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. ● Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part or the body, seek immediate medical attention. SATA Data Cable (XRN-1620SB1: 4 ea / XRN-1620B2: 8 ea) ATTENTION IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE TYPE INCORRECT.METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS. ● Ne pas ingérer la pile, risque de brûlure chimique. ● Ce produit contient une pile de type bouton/pièce de monnaie. Si la pile de type bouton/pièce de monnaie est avalée, elle peut causer de graves brûlures internes en seulement 2 heures et peut entraîner la mort. ● Gardez les piles neuves et usagées hors de portée des enfants. Si le compartiment de la pile ne se ferme pas correctement, cessez d’utiliser le produit et gardez-le d’atteinte des enfants. Si vous suspectez que des piles ont été avalées ou insérées dans une partie du corps, consultez un médecin sans tarder. ● 2 Bracket Fixing Screw (4 ea) Mounting screw for M.2 card (1 ea) SATA Power Cable (XRN-1620SB1: 1 ea / XRN-1620B2: 2 ea) Installing the HDD XRN-820S Recorder Mouse ■ If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new HDD manually in the set before use. To learn how to format, see "Device/Format" in the User Manual. ■ If you wish to replace or add an HDD, contact your dealer or our customer service first. XRN-1620B2/XRN-1620SB1 Power Cable ■ The following figures are based on Model XRN-1620B2. 1 Remove the screws from the left/right sides and back side, and push the cover back to release it. Bracket Rack Quick Guide Terminal block HDD Fixing Screw (8 ea) Bracket Fixing Screw (4 ea) SATA Power Cable 3 Mount 8 hard disks into the bracket, and fix it using screws. ■ For XRN-1620SB1 model, mount hard disks into the bottom bracket. 2 Remove the screws from the left/right sides and release the bracket. SATA Data Cable Mounting screw for M.2 card (1 ea) 4 Fix the hard-disk-mounted bracket to the recorder using screws. 3 XRN-820S 5 Connect the SATA/power cable of the hard disk to the connector of the main board. ■ Refer to the figure below for the hard disk location number and connector number. 1 Remove the screws from the left/right sides and back side, and push the cover back to release it. 3 Use the screws to fix the hard disk to the bottom of the recorder. 2 Connect the SATA/power cable of the hard disk to the connector of the main board. 4 Make sure that there is no problem in the connection port and routing inside the recorder, and then fix it using screws after closing the cover. ■ Refer to the figure below for the hard disk location number and connector number. 6 Make sure that there is no problem in the connection port and routing inside the recorder, and then fix it using screws after closing the cover. ■ When closing the cover, be careful not to damage the cable. 2 ■ 4 1 2 1 Gently press the connector before removing the HDD. Do not force to pull the cable. ■ When closing the cover, be careful not to damage the cable. Installation Wizard Setup As shown below, proceed through each step of the <Installation wizard>. Install Wizard can only be accessed at factory reset. If you do not want to proceed, click <Exit>. 1 ■ You can set the install wizard on the recorder and web viewer. Refer to the User Manual for instructions on how to set up the install wizard on the web viewer. ■ When you complete installation using the install wizard on your recorder, the install wizard will not appear on your web viewer. Select the language Select your preferred language. 3 Recorder ID/PW Setup Sets the administrator's password. 2 Network Settings ● ● ● ● ● ● DHCP server : If the DHCP server is set to enable, an IP is automatically assigned to the camera. Network 1 (Camera) : Port for camera connections; it receives video from a camera. Network 2 (All) : Network for a remote viewer (SSM, Smart Viewer, Webviewer) Network 1 (Camera) / Network 2 (All) Setup – IP Type : Choose the network connection method. – IP Address, Subnet Mask, Gateway, DNS Camera registration method : This function is only available for products that support PoE. For products that support PoE, see “Products supporting each feature” (Page 4) in the Product Specification Manual. – Enable PnP mode: Cameras connected to the PoE port of the product will automatically be registered for each channel in order of port number. ■ When the camera resets to factory default, it defaults to the ID and password set during the <Camera ID/PW> step. ■ If the camera’s ID and password have already been set, the information that matches the ID and password set during the <Camera ID/PW> step will be registered (up to 3 sets). If your camera uses a manual IP, its bandwidth should match with that of Network 1 IP for registration. ■ If the PnP mode is not used, automatically detects and registers camera connected to the product’s PoE port and camera with separate switch. ※ Click < 4 > to view the basic guide for setting a password. Refer to the password setup rules. Camera ID/PW Setup 4-1. Set a camera password in factory reset. The initial password for the camera must be entered. 4-2. If ID/PW is already set in the camera, register the ID/PW and click <Next>. 4-1 Enable online upgrade – You can receive a new firmware notification when your device is connected to a network. 4-2 ※ For more details on network settings, refer to the User manual. ▶ To use a simple intranet, click <Next>. 5 ※C lick < 7 > to view the basic guide for setting a password. Refer to the password setup rules. ※W hen the password is in factory reset, it can be changed and managed in a batch. Channel Setting You can view the camera videos registered to each channel in split mode along with thumbnail information. To change the camera video position, select a video and drag and drop it to the desired location. ※U p to 3 sets of camera ID with password and password can be registered. ※ Y ou may change the passwords of registered cameras all at once in the “Setup > Camera > Camera password” menu. ※ Y ou cannot change the password for cameras registered with ONVIF and RTSP. 5 Date & Time Setup Set the date, time, time zone, and DST and then click <Next>. 8 Click <Finish> to complete the Install Wizard. 6 Camera Register Registers the searched network cameras. 6-1 Select a camera to register from the searched camera list and click <Register>. 6-2 Select a camera to register from the list and click <Change IP>. 6-3 After completing camera register, click <Next>. 6 Explore Screen Configuration Record Setup The recorder screen consists of the following. You can set resolution, IPS, and quality of recordings by channel, and by recording type of standard / event. You can check frame rates and data transfer amount of Full Frame and Key Frame recordings for each channel, and set the transfer limit for recordings. ■ The screen may be configured differently depending on the menu selected by the user. Setup > Record > Record setup ● ● ● ● No. Screen configuration Detailed description of function Menu Clicking on each menu takes you to the corresponding menu screen. Select list of device/event Select to view list of cameras or events. Device List Event List Layout List PTZ Control Click ● List to display list of registered cameras in the recorder. ● You can also register the camera manually or automatically. Click Event to display list of events. ● This displays a list of the default layouts and the layouts that have been created. ● You can set and play sequence on the list of layouts. Controls the connected PTZ camera. Function that is frequently or urgently used. Function buttons (export, alarm stop, manual recording, OSD display, channel information, check camera status, auto-switch screen, split mode setting, change aspect ratio, switch to full screen mode) Video window Shows the video of the camera connected to the recorder. Display system status and additional functions Display events and functions to control videos ● Displays the status of the system, hard disk, and network. ● The ID of the connected user is displayed. ● Displays a QR code to download User Manual. ● Displays events that occurred on the device and functions related to video control. 7 Apply to other channels : If you select <Apply to other channels>, “Apply to other channels” confirmation window will appear. After selecting channels that the settings will be applied to, click on <OK> to apply them to the selected channels. : The camera of the corresponding channel is displayed on the list or as a thumbnail. Camera name : Displays the camera name. IP Address : Displays the camera IP address. Continuous recording / Event recording : Set the recording method for Continuous recording or Event recording. – Full frame : Records all frames fed by the camera. – I-frame : Records only key frames fed by the camera. Depends on camera settings. – Off : No recording is made. Frame – Full frame : Shows the amount of data for all the scene recordings. – I-frame : Shows the amount of data for the main scene recordings. Limit : Set the amount of data allowed for input for each channel. Event : When an event occurs, you can set which point you will start or stop recording. – Pre : When an event occurs, recording will be started regardless of the time set. If you set it to five seconds, recording will start at five seconds before an event occurs. – Post : When an event occurs, recording will continue after the time set. If you set it to five seconds, recording will continue for a further five seconds after an event is finished. Audio : Specify whether to record the sound received from the camera or not. ■ If a channel's data transfer exceeds defined allowed limit, then it may affect to other channels, and may force switching to <I-frame> recording even when the channel is configured to <Full frame> recording mode. For Key Frame recording channels, the icon for limited recording appears on the live screen's top side. But if the sum of the limits is below the max limit, you can still receive the entire frames despite exceeding the permitted bitrates for each channel. ■ A channel displayed in yellow indicates that the recorded data is not being transferred from the camera and that the recording is being performed temporarily using another profile on the camera. Check the channel information to see the applied profile to the channel listed in yellow. A channel displayed in orange indicates that the amount of inputted data is greater than the permitted data amount. In this case, it is impossible to record all of the incoming frames. Instead, only part of the frames (1 or 2 frames per second) can be recorded. To resolve this issue, you must set the permitted data amount to be greater than the amount of inputted data. Set up and Run the Layout 2-1 Search The layout set on the live screen can also be used for time search and can be searched and played according to the channel order and channel combination set by the user. ■ 1 For more information on how to set each step, refer to the ‘User Manual’. Live channel layout setup Select the layout of your choice from the channel groups you created in Live. Please select a date to search. Add a layout. Select the channel of your choice from the selected channel group. Change layout name. (Example: Lobby 02) You can view the preview screen on figure Click to select the channel to display on the layout of the device list. Press < Please save the layout you have set up. > to play the selected channel. 2-2 Play Select a layout to move to the corresponding channel group. (Example: Move to Lobby 02). 2 by moving the time bar. When you start playing, the search date and play time are displayed, and you can search for recorded videos while controlling the play speed. Search/Play Control the play speed or move to the previous or next frame. Click <Search> at the top of the screen. Export the recorded video of a designated time frame for each layout or channel. Click <Time search>. Filter events by type to search for recorded videos. Set the overlapping section according to change of time to check the time line. Display the time line for each channel. Open or close the 4-channel time line. 8 3 Using Product Information Export recorded video You can check the product information/manual/firmware information/FAQ/HDD compatibility list on the homepage or mobile web of your smartphone. http://hanwha-security.com Click < > at the bottom of the screen. Select a layout. Select a channel. Set the time, device, and format for export. XRN-1620SB1 Click the <Check capacity> button to see if you can export. Click the <Start> button to proceed with the export. XRN-1620SB1 9 http://hanwha-security.com Using P2P Service 4 From now on, when you run the WiseNet mobile application saved to your smartphone, you can easily monitor with your smartphone as you are automatically connected to the recorder. This function is available only for products that support P2P. To find products that support P2P, see ‘Products supporting each feature (Page 4)’ of the Product Specification Manual. When using a P2P service, you can easily access and use with Wisenet mobile. XRN-1620SB1 1 Click <Enable P2P> to test the connection to see if the current recorder can be connected remotely. The product is displayed on the list. ■ 2 If the connection is successful, search for WiseNet mobile on your smartphone and install and run it. ■ You can scan the QR code on the recorder by selecting Add device> QR code. 3 If you scan the QR code, the device ID shown in the recorder is automatically reflected as the mobile viewer ID. You can use the mobile viewer immediately by entering the ID/password of the recorder. XRN-1620SB1 FRYA915CKHB43N6GYHC 10 The P2P service period expires in 3 years. If you want to extend it after expiration, contact your vendor. Connecting to a Network Using a Router Checking the recorder connection from the PC If you want to add 1-3 PCs and recorders in an environment using xDSL/Cable modem, you can use the router with only one Internet line. Enter the IP set in the recorder menu in the local PC address bar to go to the web viewer screen of the recorder. This guide is an installation guide for network beginners. Follow the instructions to set up your router, local PC, and recorder. Connecting the cable or IP Router Internet Cable/ADSL/VDSL Local PC Recorder System requirements Connecting a router with PC ■ The following lists the minimum suggested hardware and operating system requirements needed to run the Web Viewer. ● Refer to the router's user manual. ● ● Connecting a recorder and a router Move to <IP & Port> of the Recorder <Network> Setting menu, and set the <Gateway> in <Setup>. ● <IP address> and ● ※ The <Default gateway> checked on the [cmd.exe] window of the local PC and the <Gateway> of the recorder must be the same. ※ At least the third number of the recorder <IP address> should be set to be the same as the <Default gateway> checked on the [cmd.exe] window of the local PC. Recommended browser : Edge, Chrome Supported browsers : Chrome, Edge, and Safari Supported OS : Works on all of the Windows, Linux, and OS X environments given the platform-independent nature of the web. Tested environments : Tested and certified to run on Windows® 10 with Edge 83, Google Chrome™ 83 and Intel® Core™ i7-7700 processor 3.60 Ghz with NVIDIA® GeForce® GTX™ 1050 or Intel™ HD Graphics 630. Performance restrictions : The performance of users' CPU/GPU may impact the video playback performance of the web viewer. Router and Internet connection setup Since each router has a different connection method, check the settings for each router. Port forwarding on the router setup Set up the router’s port forwarding to connect to a PC or a recorder connected to the router's local LAN from outside. The recorder uses the <RTSP>, <HTTP>, <HTTPS port>, and camera proxy ports. You must set up port forwarding for all the ports you use. ※ If only <HTTP> is set for port forwarding, <RTSP>, which is a video transmission port, is connected, but no video is displayed. ※ If only <RTSP> is set for port forwarding, no connection is available because <HTTP>, which is a web connection port, is connected. <cmd. screen> ※ Refer to the router's user manual. <ex. Recorder screen> 11 Accessing using DDNS address in the dynamic IP environment Connect using DDNS address In the dynamic IP environment such as xDSL/Cable modem, the router's WAN IP can be changed, so we provide DDNS (Dynamic Domain Name Server) service so that you can always access the recorder with only the DDNS address even in the dynamic IP environment. 1 Select DDNS site on the recorder setup menu and enter the product ID. 2 Connect to ddns.hanwha-security.com and check if the connection status of the registered product is set to <ON>. Wisenet DDNS Setup XRN-1620SB1 Since you will be accessing the recorder remotely, set up a Wisenet DDNS account first using a PC. 1 Open a browser, go to ddns.hanwha-security.com, and click <Login>. 2 Click <Sign Up>. < Wisenet DDNS Setup screen> Select <ddns.hanwha-security.com>on the <Server> on the <Network> menu. Enter the product ID generated on the Wisenet DDNS website for <Product ID>. When the DDNS setup is finished, select <Apply>. Follow the instructions to register an account on the website. 3 You can connect to the recorder by entering the Log in after completing account registration. 3 Click <Register Product> tab to add a recorder to your account. 4 The web viewer screen of the recorder appears. DDNS host address, http://ddns.hanwha-security. com/recorder TEST, on a local PC website address bar. You can also click < > in item 2 to connect to the recorder. 4 After registration, your product will appear in the list. XRN-1620SB1 All settings are complete. XRN-1620SB1 If you remember your DDNS address and ID / password, you can access the recorder from any PC with an Internet connection. For more information, refer to the user manual. Create a name for your recorder (product ID). Select the type of recorder and model name. Click <Product Registration>. 12 Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. 13 ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- 16 channel recording
- 4K resolution
- AI search
- Remote monitoring
- Smart Phone Event Alarm
- P2P connection
- Event recording
- Scheduled recording
- Various search modes
Frequently asked questions
Refer to "Connecting to a Network Using a Router" section of the manual.
Yes, the recorder supports ONVIF and RTSP protocols. You can check camera compatibility in the manual.
The XRN-1620SB1 supports 16 hard drives. Refer to the "Installing the HDD" section for instructions.
Yes, you can use the WiseNet mobile app to remotely monitor your system.
Refer to the "Using P2P Service" section of the manual.