Page 1 www.py|eaudio.com EER`IEE FREITIIER HIÈÉ`EEÉÉnE 5 ß

Page 1 www.py|eaudio.com EER`IEE FREITIIER HIÈÉ`EEÉÉnE 5 ß
 PYLE
www.pyleaudio.com
SERIES
PREMIER
MEROPHONE ¿DPYLE
SYSTEM E PE
UHF
PLL
LED
PDWM1902 PDWMS3375
PDWM1904 PDWM3400
www.pyleaudio.com
CATALOG
Thank you for purchasing the Premier Series Wireless Microphone
System. Please read the instructions carefully to ensure proper use and opera-
tion of the product. Also, keep the instructions for future reference.
This professional wireless microphone system uses a super steady
PPL-synthesized control technic and operates on high-efficiency,
low-consumption discharging techniques. Performance features include
independent developed mobile frequency compression, expander circuitry,
image frequency limiting circuits, a multiple checked silent and noise-free
circuits, antenna diversity receiving circuit & switch impact noise defeat circuits.
Resist reverberation circuit and changed output control. Passes Q.C. code
standards.
1. FOREWORD:............ eee eee eee estes eee seer tee aca e eee eeeeaa aes 2
2. SYSTEM FEATURES.................eeeerecrrencareereeaeeeneaeeneeereaseeneaseone5osaeanvasssenmassene5svaan—nmmam 2
3. SYSTEM TYPE................eeeeeeereeecearereeeeeeneeeeaneeeeoneeaeeasseees5ess1en=aneeeemesean<5ssenev=sneemanse]m/mDnam. 2
4. SINGLE CHANNEL RECEIVER FEATURES.................eeeeeecececcreccceeeesceneeeacenenee e. 3
5. DUAL CHANNEL RECEIVER FEATURES..............ee.eeeeeeeeecerrececaneecoeeenaeeeeoneeeneeemm——s 4
6. HAND-HELD TRANSMITTER FUNCTION & FEATURES.........cccco i, 5
7. BODY-PACK TRANSMITTER FUNCTION & FEATURES... oii, 5
8. SYSTEM CONNECTION... eee eee eres e seer eee eas 6
9. TRANSMITTER CONNECTION.......o eee eee erences eee ens 7
10. RECEIVER OPERATING INSTRUCTION... ee 8
11. TRANSMITTER OPERATING INSTRUCTION. ............…rrcceccrreccensen cesse nec eane cena 8
12. SPECIFICATION.............…rrereccreeeeereee carre nee nana eee ns e nee naar ee eaa ne ce nee nee as ane e san ec ean ec e ne 9
SYSTEM COMPOSITION
(0 em rene naar en nec e nec eme en ne X1
2. Wireless hand-held or body-pack microphone.......................ree.eeeeeeeeeees X1/X2
3. AUdIO Cable... nene nenecenece X1
4. AC power adapter of special receiver.…...…….....…......….......…..cccrereccreececssancene X1
5. Battery 1.5V.................e esse een rea eee rane ce nare een rene ee eaan een na nee n ra nee a saa nec aan annee nee X2/X4
6. User guide.…....….....…......…......…......ccsrercersercensencenserecensereensrece na rer ce nee nee mere cena X1
FOREWORD
Your new series of wireless system is designed to give you the best of both sound
reinforcement worlds:the freedom of wireless system, and the excellent quality. This
manual covers each of the series system: The Vocal Artist-UHF, The Presenter-UFH, The
Headset-UHF.
SYSTEM FEATURE
1. PLL-Synthesized control technic, 8 selectable UHF channels.
2. The UHF frequency range is 673-697.975 MHz, avoiding the frequency interruption.
3. LED information display.
4. Double noise squelch operation circuit and system will be higher efficient and much
more steady.
. Use the dynamic type and Uni-directional cartridge, clear to show the sound.
. High efficient and low consumption design.
7. Use the high extension antennas, the operating distance will reach 50 m.
O ©
SYSTEM TYPE
The Vocal Artist-UHF is a hand-held system designed for singers who desire the high
quality microphones and the freedom of wireless performance.
The Presenter-UHF is a body-pack system designed for public speakers who prefer
an inconspicuous, hands-free lavalier microphone.
The Headset-UHF is a body-pack system designed for users in physically active
applications, who desire the freedom of hand-free microphone.
SINGLE CHANNEL RECEIVER FEATURES
10.
11.
Power Button: Power ON/OFF the receiver.
Power Indicator: Indicate the power ON/OFF.
Channel Display: Indicates the frequency data of the selected channel
group.
SET Function Button: Sets channel data.
"AF"Audio Level Indicator: Indicate the wireless system audio signal level.
"RF" signal Indicator:It glows when the Receiver receive RF signal from
Transmitter.
Antenna.
Volume Knob: Adjust the volume output of receiver.
XLR Balanced Output Jack: Connect the audio cable from this jack to
the input port of amplifier, mixer.
1/4" Audio Output Jack: Connect the audio cable from this jack to the
input port of amplifier, mixer.
Power Jack: Connect the AC/DC adapter to receiver.
DUAL CHANNEL RECEIVER FEATURES
10.
11.
Power Button: Power ON/OFF the receiver.
Power Indicator: Indicate the power ON/OFF.
Channel Display: Indicates the frequency data of the selected channel
group.
SET Function Button: Sets channel data.
"AF"Audio Level Indicator: Indicate the wireless system audio signal level.
"RF" signal Indicator:lt glows when the Receiver receive RF signal from
Transmitter.
Antenna.
Volume Knob: Adjust the volume outputof receiver.
XLR Balanced Output Jack: Connect the audio cable from this jack to
the input port of amplifier, mixer.
1/4" Audio Output Jack: Connect the audio cable from this jack to the
input port of amplifier, mixer.
Power Jack: Connect the AC/DC adapter to receiver.
TRANSMITTER FUNCTION & FEATURES
a a
— 11
MA
| 1
q
ET
ZV ls
НЫ
Mr
¡UU
TI
© OE
1. Grille: Protects the cartridge and help reducing the breath sounds and wind
noise.
2. Channel Display: Indicates the frequency data of the selected channel
group.
3.Down Function Button: Sets channel data.
4 Up Function Button: Sets channel data.
5.Power and Audio Mute Switch.
6.Battery Cover: Openit to install the battery.
00 ©
o
№7
_
1. Power and Audio Mute Switch.
2. Antenna: Transmit the RF signal of transmitter.
3. Belt Clip: Attach the transmitter to the belt.
4. Audio Input Jack: it is suitable for lavalier system/headset system.
5. Channel Display: Indicates the frequency data of the selected channel
group.
6. Gain Adjusting Volume: Adjust the transmitter audio input gain.
7.State Setting Switch: Set the using state of lavalier system(L)/headset
system(H).
8.Up Function Button: Sets channel data.
9.Down Function Button: Sets channel data.
SYSTEM CONNECTIONS
1. Receiver Power Connection: Connect the AC adapter into the DC power connector
on the back of the receiver. Plug the AC adapter into a AC 120V/220V 50Hz outlet.
2. Antenna: Keep the position of antenna at a 45 angle from vertical, .(Shown
as below)
3. Audio Connection: Connect the audio cable from the audio output on the receiver
to the input on your amplifier equipment.
BODYPACK TRANSMITTER CONNECTION
1. Lavalier Microphone Connection: Connectthe connecter of supplied
Lavalier microphone to the connecting jack of transmitter (Shown as below)
Set the transmitter work state in wireless lavalier system.
(a) (b)
2. Headset Microphone Connection: Connectthe connecter of supplied
Headset microphone to the connecting jack of transmitter(Shown as below)
Setthe transmitter work state in wireless headset system.
(a) (b)
TRANSMITTER BATTERY INSTALLATION
1. Battery Installation of Transmitter: Push open the battery cover,Insert the
supplied batteries into battery jar in polarity and cover the battery Cover.
PYLE
Cotman]
femme]
(=;
TROUBLESHOOTING
PROBLEM INDICATOR STATUS SOLUTION
Slide transmitter POWER ON/OFF switch to ON
N d Red transmitter position. Make sure battery is inserted properly,
0 sound. indicater is not flash observing battery ("+/-"). If battery is inserted
properly, replace with fresh battery
No sound. Red tran Smiter Slide transmitter MUTE/ON switch to ON position
Make sure ac adapter is securely plugged into
No sound. Red receiver POWER light off electrical outlet and into dc input connector.
| Make sure ac electrical outlet works and supplies
proper voltage.
Turn up receiver volume control.
No sound. Receiver signal Indicators Confirm that the output connections from the
A/B lights glowing. receiver to the external equipment are secure
Receiver signal Indicators A/B
| | Confirn transmitter's and receiver'sfrequencies
lights off. Transmitter and
No sound. match.
receiver POWER lights . ;
Move transmitter closer to receiver
glowing
Sound level differs from level Receiver signal Indicators Adjust transmitter gain level to compessary.
of a cabled instrument. A/B lights glowing. Adjust receiver volume as necessary.
Sound level differs with | Receiver signal Indicators A/B| Readijust transmitter gain level to compensate for
different guitars. lights glowing. differences in guitar outputs
Distortion level increases | Receiver Signal Indicators
gradually A/B lights and transmitter Replace transmitter battery
LOW BATTERY light glowing
Identify potential sources of interference (other RF-
Signal Indicators A/B lights on | sources) and tum off, remove or use a wireless
system operating on a different frequency.
Bursts of noise or other
audibleradio signals present.
Momentary loss of sound as | receiver signal Indicators A/B Repositeon receiver and perform walk-through test
transmiitter is moved around lights off when sound is lost again. If audio dropouts persist, mark "dead" spots
performing area. and avoid them during performance
SYSTEM SPECIFICATIONS
RF Carrier Frequency Range: Approximately 673t0697.975MHZ (Available
frequencies depend on applicable regulations in country where system is used).
Operating Range: 50 m(approximately 164ft)under typical conditions
Audio Frequency Response: 100 to 18,000Hz,+3dB
THD: <1%
Mobile stste Range:> 100dB
Operating Temperature Range
-29° to 74 °C (-20°to 165°F)NOTE:Battery characteristics may limit this
range.
PDWM1902
Premier Series Professional UHF Wireless Handheld Microphone System
with Selectable Frequencies
LED Power Indicator & Channel Display
Operation Range: Up to 164 ft.
Audio Level Indicator for wireless system audio signal level
Includes one handheld wireless dynamic microphone
RF Signal Indicator for transmitter signal strength
UHF Signal for wider range and less obstruction
SET function for channel selection
8 separate channels to choose from
Adjustable volume control
1/4" audio output jack
XLR balanced output jack
AC/DC adapter power jack
Power Supply: 110/220V
Receiver Specifications
RF Frequency Range: 673-697.975 MHz
Image & Spurious Rejection: >70 dB
Receiving Sensitivity: -105 dB
Signal / Noise Ratio: -105dB
Border Upon Channel Rejection: >70 dB
T.H.D.:<1%
Audio Output Level: 0-300 mV
Power Requirements: 13-15V DC nominal 300 mA
Dimensions 6.8x5.3x1.7in
Handheld Transmitter Specifications
Displays channel and selection data
RF Frequency Range: 673-697.975 MHz
RF Output: >10 dBm
Modulation Type: FM
Max Deviation: + 40 KHz
Spurious Emission: > 55 dBc
Nominal Current Drain: <40mA
Power Requirements: 2x 1.5V AA
Dimensions: 9.25x1.9x1.9in
The Pyle PREMIER Series Wireless Microphone System will provide you with the
performance you've been looking for. Whether used for work or play, this cordless
microphone system is easy to setup, easy to use, and best of all, will give you an
amazing high-quality audio experience. Choose from 8 different channels to tran
smit over. Enjoy hassle-free and reliable wireless sound transmission with today's
latest system technology with this all-in-one package. Excellent sound production
for vocals or speech and perfect for just about any event on stage, in the office or
even athome. Comes with everything you need to perform. No matter what you use
it for, the Pyle PREMIER Series Wireless Microphone System will take your sound
and style to the next level.
PDWM1904
Premier Series Professional UHF Microphone System with Body-Pack
Transmitters, Headset & Lavalier Microphones with Selectable Frequencies
LED Power Indicator & Channel Display
Operation Range: Up to 164 ft.
Audio Level Indicator for wireless system audio signal level
Includes one handheld wireless dynamic microphone
RF Signal Indicator for transmitter signal strength
UHF Signal for wider range and less obstruction
SET function for channel selection
8 separate channels to choose from
Adjustable volume control
1/4" audio output jack
XLR balanced output jack
AC/DC adapter power jack
Power Supply: 110/220V
Receiver Specifications
RF Frequency Range: 673-697.975 MHz
Image & Spurious Rejection: >70 dB
Receiving Sensitivity: -105 dB
Signal / Noise Ratio: -105dB
Border Upon Channel Rejection: >70 dB
T.H.D.:<1%
Audio Output Level: 0-300 mV
Power Requirements: 13-15V DC nominal 300 mA
Dimensions 6.8 x5.3x1.7 in
Body-Pack Transmitter Specifications
Includes wireless body-pack transmitters, headsets & lavaliers
RF Frequency Range: 673-697.975 MHz
RF Output: >10 dBm
Modulation Type: FM
Max Deviation: +40 KHz
Spurious Emission: > 55 dBc
Nominal Current Drain: <40mA
Power Requirements: 2x 1.5V AA
Dimensions: 9.25x1.9x1.9in
The Pyle PREMIER Series Wireless Microphone System will provide you with the
performance you've been looking for. Whether used for work or play, this cordless
microphone system is easy to setup, easy to use, and best of all, will give you an
amazing high-quality audio experience. Choose from 8 different channels to tran
smit over. Enjoy hassle-free and reliable wireless sound transmission with today's
latest system technology with this all-in-one package. Excellent sound production
for vocals or speech and perfect for just about any event on stage, in the office or
even athome. Comes with everything you need to perform. No matter what you use
it for, the Pyle PREMIER Series Wireless Microphone System will take your sound
and style to the next level.
10
PDWM3375
Premier Series Professional 2-Channel UHF Wireless Handheld Microphone System
with Selectable Frequencies
LED Power Indicator & Channel Display
Operation Range: Up to 164 ft.
Audio Level Indicator for wireless system audio signal level
RF Signal Indicator for transmitter signal strength
Independent & adjustable channel volume controls
UHF Signal for wider range and less obstruction
Up to eight separate channels to choose from
1/4" audio output jack
XLR balanced output jack
AC/DC adapter power jack
Power Supply: 110/220V
Receiver Specifications
RF Frequency Range: 673-697.975 MHz
Image & Spurious Rejection: >70 dB
Receiving Sensitivity: -105 dB
Signal / Noise Ratio: -105dB
Border Upon Channel Rejection: > 70 dB
T.H.D.:<1%
Audio Output Level: 0-300 mV
Power Requirements: 13-15V DC nominal 500 mA+
Dimensions 6.8 x 5.3 x 1.7 in
Handheld Transmitter Specifications
Includes (2) wireless Dynamic microphones
RF Frequency Range: 673-697.975 MHz
RF Output: >10 dBm
Modulation Type: FM
Max Deviation: + 40 KHz
Spurious Emission: > 55 dBc
Nominal Current Drain: < 420mA
Power Requirements: 2x 1.5V AA
Dimensions: 9.25 x 1.9x 1.9 in
The Pyle PREMIER Series 2-Channel Wireless Microphone System will provide you with
the performance you've been looking for. Whether used for work or play, this dual cordless
microphone system is easy to setup, easy to use, and best of all, will give you an amazing
high-quality audio experience. Choose from 8 different channels to transmit over. Enjoy
hassle-free and reliable wireless sound transmission with today's latest system technology
with this all-in-one package. Excellent sound production for vocals or speech and perfect
for just about any event on stage, in the office or even at home. Comes with everything you
need to perform including 2 wireless handheld transmitter microphones. No matter what
you use it for, the Pyle PREMIER Series 2-Channel Wireless Microphone System will take
your sound and style to the next level.
11
PDWM3400
Premier Series Professional UHF Microphone System with (2) Body-Pack
Transmitters, (2) Headset & (2) Lavalier Microphones with Selectable
Frequencies
LED Power Indicator & Channel Display
Operation Range: Up to 164 ft.
Audio Level Indicator for wireless system audio signal level
Includes two handheld wireless dynamic microphones
Independent & adjustable channel volume controls
RF Signal Indicator for transmitter signal strength
UHF Signal for wider range and less obstruction
Up to eight separate channels to choose from
1/4" audio output jack
XLR balanced output jack
AC/DC adapter power jack
Power Supply: 110/220V
Receiver Specifications
RF Frequency Range: 673-697.975 MHz
Image & Spurious Rejection: >70 dB
Receiving Sensitivity: -105 dB
Signal / Noise Ratio: -105dB
Border Upon Channel Rejection: > 70 dB
T.H.D.:<1%
Audio Output Level: 0-300 mV
Power Requirements: 13-15V DC nominal 500 mA+
Dimensions 6.8 x 5.3 x 1.7 in
Body-Pack Transmitter Specifications
Includes (2) wireless body-pack transmitters, headsets & lavaliers
RF Frequency Range: 673-697.975 MHz
RF Output: >10 dBm
Modulation Type: FM
Max Deviation: +40 KHz
Spurious Emission: > 55 dBc
Nominal Current Drain: <40mA
Power Requirements: 2x 1.5V AA
Dimensions: 9.25 x 1.9 x 1.9 in
The Pyle PREMIER Series Wireless Microphone System will provide you with
the performance you've been looking for. System comes with 2 body-pack
transmitters, 2 headset & 2 lavalier microphones. Whether used for work or play,
this microphone system is easy to setup, easy to use, and best of all, will give
you an amazing high-quality audio experience. Choose from 8 different channels
to transmit over. Enjoy hassle-free and reliable wireless sound transmission with
today's latest system technology with this all-in-one package. Excellent sound
production for vocals or speech and perfect for just about any event on stage, in
the office or even at home. Comes with everything you need to perform. No matter
what you use it for, the Pyle PREMIER Series Wireless Microphone System will
take your sound and style to the next level.
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement