Honeywell PLS730B, PLS731B Programmable Wall Switch Installation and User Guide

The Honeywell PLS730B/PLS731B Programmable Wall Switch is designed to control lighting and motors. It has been designed for use with resistive and inductive loads, including incandescent lights, halogen lights, fluorescent lights, compact fluorescent lights (CFL), sodium lamps, electronic ballasts, pool filter pumps, and fans. The switch has two operating modes: manual (MAN) and automatic (AUTO). In manual mode, you can manually turn the lights on or off by pressing the switch door. In automatic mode, the switch follows the programmed schedule for turning the lights on and off.

PDF Download
Document
Honeywell PLS730B/PLS731B Installation and User Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Programmable schedules
  • Manual and automatic modes
  • Resistive and inductive load control
  • Up to 7 programs
  • 12/24-hour time format
  • Power outage protection
  • Easy to install

Frequently asked questions

The maximum load for the PLS730B/PLS731B Programmable Wall Switch is 2400 watts for resistive or inductive loads, and 1 horsepower for motors.

You can create up to 7 programs with the PLS730B/PLS731B Programmable Wall Switch.

The programs are protected by a rechargeable battery. The screen will be blank during the power outage.

To temporarily override the programmed schedule, briefly press the switch door. The new state (ON or OFF) will flash to show that this state is temporary.
Preparing document for printing…
0%