advertisement
OWNER’S MANUAL
MINI HI-FI
SYSTEM
Please read this manual carefully before operating your set and retain it for future reference.
CM8450 (CM8450, NS8450F, NS8450W)
P/NO : MFL**
www.lg.com
1 Getting Started
1
2
Getting Started
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.
WARNING: Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center.
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.
Getting Started
3
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.
This device is equipped with a portable battery or accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
1
4
Table of Contents
Table of Contents
1 Getting Started
2 Connecting
12 How to Affix the Ferrite Core
12 – Affix the Ferrite Core for power cord and speaker cables
12 – Attaching the speaker light cables to the unit
13 Optional Equipment Connection
3 Operating
16 – Selecting a folder and an MP3/WMA file
19 Using a Bluetooth wireless technology
19 – Listening to music stored on the
21 – Pairing your unit and Bluetooth device through NFC Tag
22 Using the Music Flow Bluetooth App
22 – Install “Music Flow Bluetooth” App onto Your Bluetooth Device
23 – Activate Bluetooth with “Music Flow
24 – Improving poor FM reception
24 – Presetting the Radio Stations
24 – Deleting all the saved stations
29 – Turn off the sound temporarily
29 – Displaying file information
30 – Setting the Clock through “Music
30 – Using your player as an alarm clock
4 Troubleshooting
5 Appendix
Table of Contents
5
3
4
5
1
2
1
6
Getting Started
Unique Features
Bluetooth®
Listens to music stored on your bluetooth device.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc.)
Playback effects
Listens to music with various sound and playback effects.
USB Direct Recording
Records music to your USB device.
Music Flow Bluetooth
Music Flow Bluetooth is an App designed to let you take control of some of LG’s latest Audio devices.
LG Sound Sync
Controls volume level of this unit by the remote control of your LG TV that is compatible with LG
Sound Sync.
Accessories
Please check and identify the supplied accessories.
FM Antenna (1)
Remote Control (1)
AM Antenna (1)
Batteries (2)
Getting Started
7
Playable file
Requirement
Music file requirement
MP3/WMA file compatibility with this unit is limited as follows.
y Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA) y Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA) y Maximum files : Data CD : 999 / USB : 2000 y Maximum folders : Data CD : 99 / USB : 200 y File extensions : “.mp3”/ “.wma” y Certain MP3/WMA files may not be played depending on the type or format of the file.
y CD-ROM file format : ISO 9660/ JOLIET y We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system.
The DTS is not supported. In case of DTS audio format, audio is not output.
You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players.
(Mastered/Live File System : Disc format system for
Windows Vista)
Compatible USB Devices
y MP3 Player : Flash type MP3 player.
y USB Flash Drive :
Devices that support USB2.0 or USB1.1. y The USB function of this unit does not support all USB devices.
USB device requirement
y Devices which require additional program installation when you have connected it to a computer, are not supported.
y Do not extract the USB device while in operation.
y For a large capacity USB, it may take longer than a few minute to be searched.
y To prevent data loss, back up all data.
y If you use a USB extension cable or USB hub, the
USB device is not recognized.
y Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.) y This unit recognizes up to 2000 files.
y External HDD, Card readers, Locked devices, or hard type USB devices are not supported.
y USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
y Some USB may not work with this unit.
1
1
8
Getting Started
Remote control
• • • • • • • • • • a • • • • • • • • •
1 (Power) : Switches the unit ON or OFF.
B (Open/Close) : Opens and closes the disc tray.
PRESET.FOLDER W/S :
- Searches for a folder of MP3/WMA files. When a CD/USB containing MP3/WMA files in several folders is being played, press PRESET.FOLDER
W/S to select the folder you want to play.
- Chooses a preset number for a radio station.
FUNCTION : Selects the function and input source.
MUTE @ : Mutes the sound.
VOL +/- : Adjusts speaker volume.
PROGRAM/MEMORY :
- Stores radio stations.
- Deletes all the saved stations.
- Creates a programmed list you want to listen to.
USB REC : USB direct recording.
SLEEP : Sets the system to turn off automatically at a specified time.
(Dimmer : The display window will be darkened by half.)
Battery Installation
Remove the battery cover on the rear of the
Remote Control, and insert two (size AAA) batteries with 4 and 5 matched correctly.
• • • • • • • • • • b • • • • • • • • •
REPEAT (MENU) : Listens to your tracks/files repeatedly or randomly.
TUNING-/+ : Selects the radio stations.
C/V (Skip/Search) :
- Skips Fast backward or Forward.
- Searches for a section within a track/file.
Z ENTER :
- Stops playback or recording.
- Cancels DELETE function.
d/M (Play/Pause) :
- Starts or pauses playback.
- Selects STEREO/MONO.
SOUND EFFECT : Chooses sound impressions.
AUTO DJ : Selects the AUTO DJ mode. (For more
DELETE :
- Deletes MP3/WMA files. (USB only).
- Deletes a song on the programmed list.
Getting Started
9
• • • • • • • • • • c • • • • • • • • •
0 to 9 numerical buttons : Selects numbered tracks, files, or preset number.
INFO
- Sees informations about your music. An MP3 file often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
- Sees the address of connected Bluetooth device in Bluetooth mode.
REGION EQ : Chooses region equalizer.
• • • • • • • • • • d • • • • • • • • •
CLOCK : Sets a clock and checks a time.
ALARM : With the ALARM function you can turn
CD, USB play and Tuner reception on at a desired time.
SET : Confirms the setting.
DJ EFFECT : Selects DJ EFFECT mode. (Refer to
DJ LEVEL +/- : Adjusts the level of DJ EFFECT sound.
* : This button is not available.
1
10
Getting Started
Front panel
i j k l m n o
1
a b c d e f g h p qr s t a
1
/!(Power) b DJ EFFECT
Selects DJ EFFECT mode. (For more information refer
c BASS BLAST
Selects BASS or STANDARD effect directly.
d AUTO DJ
Selects the AUTO DJ mode. (For more information
u vw x p SCRATH & CONTROL
Turn clockwise or counterclockwise to make Scratch sound. / Sets Delay value in X-BOOM PLUS mode. /
Adjust DJ EFFECT level.
q X-BOOM PLUS/DEMO
Press to select X-BOOM PLUS mode. / Shows Demo mode.
r MIC. jack s
Y/U
- Skips Fast backward or Forward.
- Searches for a section within a track/file.
e USB REC
Records to USB.
f FOLDER
Moves to folder and file in selection mode.
g ENTER
Selects a folder when searching a file.
h DELETE
-Deletes a song on the programmed list.
-Deletes MP3/WMA files. (USB only).
I
Stops playback or cancels DELETE function.
T
- Starts or pauses playback.
- Selects Stereo/Mono.
USER EQ
Controls sound register.
i : You can easily connect to Bluetooth devices
through NFC Tag. (Refer to page 21)
j USB 1 Port
You can play or record sound files by connecting the
USB device.
k BASS
Adjusts BASS sound level when setting USER EQ.
l Display window
LATIN EQ
Chooses locally special equalizer.
LIGHTING
Turns on/off the lighting effects.
EJECT
Opens and closes the disc tray.
t Disc tray u MIC VOL. v PORT. IN jack m MASTER VOLUME
Adjusts speaker volume.
n TREBLE
Adjusts TREBLE sound level when setting USER EQ.
w FUNCTION
Selects the function and input source.
x SEARCH
Searches a folder and a file on CD/USB function.
o USB 2 Port
You can play or record sound files by connecting the
USB device.
Rear panel
b c a Power cord
>
Caution y Connect the power cord to wall outlet directly if possible. Or when you use an extension cable, it is highly recommended to use an extension cable of 110 V / 15 A or 230 V / 15 A, otherwise the unit may not operate properly because of the lack of power supply.
y Do not overload the extension cord with excessive electrical load.
d e b SPEAKERS connector c SPEAKER LIGHTING SYSTEM d ANTENNA (FM, AM) e AUX IN (L/R)
AUX OUT (L/R)
Getting Started
11 a
1
2 Connecting
2
12
Connecting
How to Affix the
Ferrite Core
Ferrite core may not be provided depending on each nation’s regulations.
Affix the Ferrite Core for power cord and speaker cables
You must affix a ferrite core in order to reduce or eliminate electrical interference.
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the power cord around the ferrite core twice (Once for 110 V cord).
Wind the SPEAKERS cables around the ferrite core once.
Wind the SPEAKER LIGHTING SYSTEM cables around the ferrite core once.
3. Close the ferrite core until it clicks.
Connecting to speakers
Connect the speaker cable plugs to the SPEAKERS connector. Make sure to connect the speaker’s plug to the corresponding colored speaker connector when connecting the plug.
Attaching the speaker light cables to the unit
To connect the speaker light cable to the unit, insert the cable to SPEAKER LIGHTING SYSTEM connectors on the unit.
>
Caution y Make sure that the jacks and the speakers are matched correctly.
y Make sure to connect the cables to connectors tightly on the unit.
Optional Equipment
Connection
Connecting
13
>
Caution y Do not try to lift the speaker alone. It needs two persons to lift the speaker. Otherwise it may result in the speaker malfunction and cause personal injury and/or property damage.
y When you connect the speakers to the unit, make sure to connect the speaker’s cable and plug to the corresponding speaker connector. y Check the volume level before playing music to prevent infirm, child, and pregnant women from being shocked by the sudden and loud sound from the unit.
y Do not use the unit in a limited space.
It may damage a person’s hearing. It is recommended to use it in a wide space.
y Be careful to make sure children not to put their hands or any objects into the opening speaker duct hole.
y The speakers contain magnet parts, so color irregularity may occur on the TV screen or PC monitor screen. Please use the speakers far away from either TV screen or PC monitor.
y Avoid looking at the speaker lights for a long time. It may cause damage to eyesight. diaphragm or the dust cap of the speaker.
AUX IN Connection
Connect an output of auxiliary device (Camcorder,
TV, Player, etc) to the AUX IN (L/R) connector.
If your device has only one output for audio
(mono), connect it to the left audio jack on the unit.
2
Red
White
Audio cable
DVD, Blu-ray player etc.
14
Connecting
AUX OUT Connection
Connect an input of auxiliary device to the AUX
OUT (L/R) connector.
If your device has only one input for audio(mono), connect it to the left audio jack on the unit.
PORT. IN Connection
Connect an output (earphone or line out) of portable device (MP3 or PMP etc) to the
PORT. IN connector.
2
Auxiliary device
Audio cable
X-BOOM PLUS
You can connect two units to play music together .
1. Connect AUX OUT connector on a unit to the
AUX IN connector on the other unit using
Audio cable.
2. Press on the unit connected through AUX OUT.
X-BOOM PLUS is displayed.
3. Rotate clockwise or counterclockwise to adjust Delay setting.
4. Press to save the Delay setting.
,
Note
y This function
is available on CD, USB 1, USB
2, BT or PORTABLE Function. y The initial Delay is 0 ms and the Delay becomes to 30 ms when you press
X-BOOM
PLUS/DEMO
. The connected device’s Delay may differ. If Audio Sync is not matched, adjust Delay of X-BOOM PLUS/DEMO to synchronize sound.
y It is available to adjust the Delay from 0 ms to 100 ms. Synchronizing tempo is not available depending on devices.
y Delay value is saved when the unit turns off.
Portable cable
MP3 player etc.
Listening to music from your portable player or external device
The unit can be used to play the music from many types of portable player or external device.
1. Connect the portable player to the PORT. IN connector of the unit.
Or
Connect the external device to the AUX IN connector of the unit.
2. Turn the power on by pressing 1
/!.
3. Press FUNCTION to select PORTABLE or AUX
Function.
4. Turn on the portable player or external device and start it playing.
USB Connection
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
USB device
Connecting
15
Antenna Connection
Connect the supplied FM/AM antenna for listening to the radio.
Connect the AM loop antenna to the AM antenna connector.
Connect the FM wire antenna to the FM antenna connector.
2
FM antenna
AM antenna
,
Note
Removing the USB device from the unit :
1. Choose a different function/mode or press Z ENTER on the remote control or I on the unit twice in a row.
2. Remove the USB device from the unit.
,
Note
y To prevent noise pickup, keep the AM Loop antenna away from the unit and other components.
y Be sure to fully extend the FM wire antenna.
3 Operating
3
16
Operating
Basic Operations
CD/USB Operations
1. Insert the disc by pressing B on the remote control or EJECT on the unit
Or connect the USB device to the USB port.
2. Select CD or USB function by pressing
FUNCTION.
To
Stop
Playback
Pause
Searching for a section within a track/ file
Selecting a track/file directly
Do this
Press Z ENTER on the remote control or I on the unit.
Press d/M on the remote control or T on the unit.
Press d/M on the remote control or T on the unit during playback.
Press C/V on the remote control or Y/U on the unit during playback and release it at the point you want to listen to.
Press 0 to 9 numerical buttons on the remote control to go to the desired file or track directly.
- In stop status,
Press C/V on the remote control or Y/U on the unit to go to the next/previous track/file.
- During Playback,
(1) By using C/V buttons :
Press V on the remote control or
U on the unit to go to the next track/file. Skipping to the next/ previous track/file
Playing less than 2 seconds, press
C on the remote control or
Y on the unit to go to the previous track/file.
Playing after 3 seconds, press C on the remote control or Y on the unit to go to the beginning of the track/file.
(2) By using SEARCH :
Playing repeatedly or randomly
Rotate SEARCH on the unit and press d/M to play the track/ file.
Press REPEAT(MENU) on the remote control repeatedly. Refer to the note for details about the display change.
,
Note
y The display changes in the following order.
USB
RPT 1
RPT*DIR
RPT ALL
RANDOM
OFF
MP3/WMA CD AUDIO CD
RPT 1
RPT DIR
RPT ALL
RANDOM
OFF
RPT 1
-
RPT ALL
RANDOM
OFF
*DIR : Directory y When you play the programmed list, only
RPT 1 and RPT ALL are available.
y Even after restarting the unit or switching one function to another, you can listen to music from the point where it’s last been played.
y If you leave the disc tray open for 5 minutes, it will close automatically.
Auto Play
- AUDIO/MP3/WMA CD is played automatically after Disc tray is open and then closed.
- Automatically switches to the CD function if Disc tray is open and then closed when there is no disc in Disc tray.
Selecting a folder and an MP3/WMA file
On the unit
1. Press FOLDER and rotate SEARCH until a desired folder appears.
2. Press ENTER and rotate SEARCH until a desired file appears. Press T to play it.
On the remote control
1. Press PRESET.FOLDER W/S on the remote control repeatedly until a desired folder appears.
2. Press d/M to play it. The first file of folder will play.
,
Note
y CD / USB Folders/Files are recognized as
* below.
y If there is no file in a folder, the folder will not appear.
y Folders will be presented as the following order;
ROOT FOLDER 1 FOLDER 3 FOLDER
7 FOLDER 8 FOLDER 5 FOLDER 6 y File will be played from $ file No.1 to $ file
No.14 one by one.
y Files and folders will be presented in order recorded and may be presented differently according to the record circumstances.
y *ROOT : The first screen you can see when a computer recognize the USB is “ROOT”.
Operating
17
Deleting an MP3/WMA file
You can delete file, folder or format by pressing
DELETE. This function is supported only in stop status. (USB only)
1. - Select the file you want to delete and press
DELETE.
- Select the folder you want to delete by pressing FOLDER and rotating SEARCH on the unit and press DELETE.
Or select the folder you want to delete by pressing PRESET.FOLDER W/S on the remote control and press DELETE.
- Press and hold DELETE to format the USB device.
Or
Press DELETE repeatedly during selecting the
MP3/WMA file.
The display changes in the following order.
- DEL FILE : Deletes file
- DEL DIR : Deletes folder
- FORMAT : Formats USB
2. To delete file/folder or format, press d/M on the remote control or press T on the unit.
If you want to exit the current mode, press
Z ENTER on the remote control or press I on the unit.
>
Caution y Do not extract the USB device during operation. (play, delete, etc.) y Regular back up is recommended to prevent data loss.
y The delete function may not be supported according to the USB status. (lock, etc.)
3
3
18
Operating
Playback Effect
The unit supports various sound and playback effects : DJ EFFECT, SCRATCH, AUTO DJ.
DJ EFFECT
It allows you to enjoy DJ EFFECT such as Flanger/
Phaser/Chorus/Delay sound effect.
1. Press DJ EFFECT to select a desired DJ EFFECT
(FLANGER, PHASER, CHORUS, DELAY, OFF).
2. Turn
SCRATCH & CONTROL
clockwise or counterclockwise to adjust the DJ EFFECT level between 0 to 15.
,
Note
y The DJ EFFECT mode is displayed for 3 seconds when a DJ EFFECT Key is inputted. y The gage starts at the beginning with an initial 7 level. y The current gage level is displayed when adjusting gage. y If the function changed or the unit is turned off and on, DJ EFFECT mode with DJ EFFECT is turned off.
SCRATCH Effect
You can output and mix the sound effects of the
SCRATCH.
Rotating
SCRATCH & CONTROL
to mix the scratch sound.
- You can hear effect of scratch sound depending on the direction in which you rotate
SCRATCH &
CONTROL
.
AUTO DJ
Auto DJ blends the end of one song into the beginning of another for seamless playback.
It equalizes volume across tracks/files for uninterrupted playback.
Press AUTO DJ on the remote control repeatedly, the display changes as followings. RANDOM (AUTO
DJ RANDOM) -> RPT (AUTO DJ SEQUENTIAL) ->
(AUTO DJ OFF)
Mode
OFF
RANDOM
Display
Window
-
(AUTO DJ OFF)
RANDOM
(AUTO DJ
RANDOM)
REPEAT
RPT
(AUTO DJ
SEQUENTIAL)
Description
-
The music is played randomly on this mode.
The music is played repeatedly on this mode.
,
Note
y AUTO DJ mode does not support searching for a section within a track/file or to play repeatedly or randomly.
y If you move to other functions or stop the music using I on the unit (or Z ENTER on the remote control) on AUTO DJ mode,
AUTO DJ will be disable.
y AUTO DJ is not supported in the music file whose length is less than 60 seconds.
y During recording, AUTO DJ is not available.
y Only AUTO DJ SEQUENTIAL is selected when played the programmed list.
Operating
19
Using Bluetooth® wireless technology
About Bluetooth
Bluetooth® is wireless communication technology for short range connection.
The sound may be interrupted when the connection interfered by the other electronic wave or you connect the bluetooth in the other rooms.
Connecting individual devices under Bluetooth® wireless technology does not incur any charges. A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA.
Bluetooth Profiles
In order to use Bluetooth® wireless technology, devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Listening to music stored on the Bluetooth devices
Pairing your unit and Bluetooth device
Before you start the pairing procedure, make sure the Bluetooth feature is activated on your
Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again.
1. Select the Bluetooth function by using
FUNCTION until BT function is selected.
“BT READY” appears on the display window.
2. Operate the Bluetooth device and perform the pairing operation. When searching for this unit with the Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device. Your unit appears as “LG CM8450(XX)”.
,
Note
y XX means the last two digits of Bluetooth address. For example, if your unit has a
Bluetooth address such as 9C:02:98:4A:F7:08, you will see “LG CM8450(08)” on your
Bluetooth device.
y Depending on the Bluetooth device type, some devices may have a different pairing process. Enter the PIN code (0000) as needed.
y You can connect this unit with up to 3
Bluetooth devices simultaneously using the same method as described above, only in the Bluetooth function. y The multi pairing connection is only supported on Android or iOS devices. (Multi pairing connection may not be supported depending on the connected device specifications.) y Removable/detachable Bluetooth devices
(Ex: Dongle etc.) will not support multi pairing.
3
3
20
Operating
3. When this unit is successfully connected with your Bluetooth device, “PAIRED” will be appear on the display window and change to
Bluetooth device name soon.
,
Note
y "PAIRED" will momentarily appear on the display when you connect other devices for multi pairing.
y If the device name is unavailable, “_” will be displayed.
4. Listen to music.
To play a music stored on your Bluetooth device, refer to your Bluetooth device’s user guide.
,
Note
y When using Bluetooth® technology, you have to make a connection between the unit and the bluetooth device as close as possible and keep the distance.
However, it may not work well in certain situations as described below :
- There is a obstacle between the unit and the bluetooth device.
- There is a device using same frequency with Bluetooth® technology such as a medical equipment, a microwave or a wireless LAN device.
y You should connect your bluetooth device to this unit again when you restart it.
y Even if this unit connected up to 3 Bluetooth devices in the Bluetooth mode, you can play and control music by using only one of the connected devices.
,
Note
y When this unit connected with multiple
Bluetooth devices, only one device which you are playing keeps Bluetooth connection when you change the function to the others. y The sound may be interrupted when the connection has interference from other electronic devices.
y You may not control the Bluetooth device with this unit.
y Depending on the type of the device, you may not be able to use the Bluetooth function.
y You can enjoy wireless system using phone,
MP3, Notebook, etc.
y The more distance between the unit and the bluetooth device, the lower the sound quality becomes.
y Bluetooth connection will be disconnected when the unit is turned off or the Bluetooth device gets far from the unit.
y When Bluetooth connection is disconnected, connect the bluetooth device to the unit again.
y When a Bluetooth device is not connected,
“BT READY” appears on the display window.
y When you use the BT function, adjust the volume to a proper level on the Bluetooth device.
y If it is not in the BT function, only one device can be connected. y If a Bluetooth device is connected when using LG TV, LG TV is disconnected and the
Bluetooth device is connected.
y When you connect Bluetooth device
(iOS device etc.) to this unit or operate the device, the volume level can be synchronized with each other.
Pairing your unit and
Bluetooth device through NFC
Tag
About NFC Tag
Connect to the Bluetooth by using the
Bluetooth devices that support NFC(Near Field
Communication) .
1. Activate the NFC feature of your NFC-enabled phone.
2. Turn on the unit.
3. Tag the back of your NFC-enabled phone over the unit.
Operating
21
,
Note
y Please use a device which has the NFC feature. y NFC Recognition area may be different depending on the type of Bluetooth device. Please check the position of NFC recognition area of the Bluetooth device before tagging.
y If the screen of the Bluetooth device is locked, the device may not recognize the
NFC Tag.
y In some cases, the device may not recognize the NFC.
- When the case of the Bluetooth devices is chrome-plated material.
- According to the material and thickness of the case on the Bluetooth device.
- According to the performance of the NFC of the Bluetooth devices.
y Android O/S : Ver 4.1.2 (or later) y You must activate the NFC feature of your
NFC-enabled phone.
3
4. “PAIRED” is displayed on the unit if Bluetooth pairing is successful.
5. You can listen to music played on this unit using your Bluetooth device.
3
22
Operating
Using the Music Flow
Bluetooth App
,
Note
Only Android OS is available to use “Music Flow
Bluetooth” app with this unit.
About “Music Flow Bluetooth” App
“Music Flow Bluetooth” app brings a suite of new features to this unit.
To enjoy more features, you are recommended to download and install free “Music Flow Bluetooth” app.
Install “Music Flow Bluetooth”
App onto Your Bluetooth
Device
There are two ways to install “Music Flow Bluetooth”
App onto Your Bluetooth Device.
Install “Music Flow Bluetooth” App through QR code
1. Install “Music Flow Bluetooth” app through QR code. Use the scanning software to scan the QR code.
Install “Music Flow Bluetooth” App through “Google Android Market
(Google Play Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
2. In the search bar, type in the “Music Flow
Bluetooth” and search it.
3. In the search result list, find and tap “Music Flow
Bluetooth” to start downloading Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
,
Note
y Make sure that your Bluetooth device is connected to the Internet.
y Make sure that your Bluetooth device is equipped with “Google Android Market
(Google Play Store)”.
2. Tap an icon for installation.
3. Tap an icon for downloading.
,
Note
y Make sure that your Bluetooth device is connected to the Internet.
y Make sure that your Bluetooth device has a scanning software application. If you don’t have one, download one from “Google
Android Market (Google Play Store)”.
y Depending on the area, QR code may not work.
Activate Bluetooth with “Music
Flow Bluetooth” App
“Music Flow Bluetooth” app helps to connect your
Bluetooth device to this unit.
1. Tap “Music Flow Bluetooth” app icon on the home screen to open “Music Flow Bluetooth” app, and go to the main menu.
2. Tap [Menu] and select the unit you want.
3. If you want to get more information to operate, tap [Setting] and turn on the User guide.
Operating
23
,
Note
y “Music Flow Bluetooth ” app will be available in the software version as follow;
- Android O/S : Ver 4.0.3 (or later) y If you use “Music Flow Bluetooth ” app for operation, there would be some differences between “Music Flow Bluetooth ” app and the supplied remote control. Use the supplied remote control as necessary.
y Depending on the Bluetooth device, “Music
Flow Bluetooth ” app may not work.
y After connection of “Music Flow Bluetooth ” app, music may be output from your device.
In this case, try connecting procedure again.
y If you operate the other applications or change the settings on your Bluetooth device while using “Music Flow Bluetooth
” app, “Music Flow Bluetooth ” app may operate abnormally.
y When “Music Flow Bluetooth ” app operates abnormally, check your Bluetooth device and the connection of “Music Flow
Bluetooth ” app and then try to connect again.
y Depending on the smart phone's operating system, you have some differences for
“Music Flow Bluetooth ” operation.
y Check Bluetooth setting on your Bluetooth device if “Music Flow Bluetooth ” app connection does not work well.
3
3
24
Operating
Radio Operations
Be sure that both FM and AM aerials are connected.
Listening to the radio
1. Press FUNCTION until FM or AM appears in the display window.
The last received station is tuned in.
2. Auto tuning :
Press and hold TUNING-/+ on the remote control or Y/U on the unit for about two seconds until the frequency indication starts to change, then release. Scanning stops when the unit tunes in a station.
Or
Manual tuning :
Press TUNING-/+ on the remote control or
Y/U on the unit repeatedly.
3. Adjust the volume by rotating volume knob on the unit or by pressing VOL +/- on the remote control repeatedly.
Improving poor FM reception
Press T on the unit or d/M on the remote control. This will change the tuner from stereo to mono and usually improve the reception.
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure to turn down the volume.
1. Press FUNCTION until FM/AM appears in the display window.
2. Select the desired frequency by pressing
TUNING -/+ on the remote control or
Y/U on the unit.
3. Press PROGRAM/MEMORY on the remote control. A preset number will blink in the display window.
4. Press PRESET.FOLDER W/S on the remote control to select the preset number you want.
5. Press PROGRAM/MEMORY on the remote control. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET.FOLDER W/S or 0 to 9 numerical buttons on the remote control.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY on the remote control for two seconds.
“ERASEALL” will flash up on the unit display.
2. Press PROGRAM/MEMORY on the remote control to erase all the saved radio stations.
Sound adjustment
Setting the sound mode
This system has a number of pre-set surround sound fields. You can select a sound mode you want by using SOUND EFFECT on the remote control.
The displayed items for the Equalizer may be different depending on sound sources and effects.
On Display
NATURAL
Local
Specialization equalizer
(Optional)
AUTO EQ
POP
CLASSIC
JAZZ
ROCK
BASS
FOOTBALL
Description
You can enjoy comfortable and natural sound.
Regionally optimized sound effect.
(FORRO/FUNK/SERTANEJ/
DANGDUT/ARABIC/PERSIAN/
INDIA/REGUETON/MERENGUE/
SALSA/SAMBA/CUMBIA/AFRO/
AXE/TECNO BR)
Realizes the sound equalizer that is the most similar to the genre of which is included in the MP3
ID3 tag of song files.
This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an actual rock, pop, jazz or classic concert.
Reinforces the treble, bass and surround sound effect.
You can enjoy the sound effect
FOOTBALL STADIUM.
FLAT
BOOST
Provides balanced sound.
Boosts the mid-range for sound reinforcement.
TRE/BASS Reinforces the treble and bass.
STANDARD You can enjoy optimized sound.
Operating
25
,
Note
y On some speakers, sound may not be heard or heard in low sound depending on the sound mode.
y Maybe you need to reset the sound mode, after switching the input, sometimes even after the sound track/file changed.
y By pressing BASS BLAST on the unit you can directly select STANDARD or BASS effect.
y By pressing LATIN EQ on the unit, you can directly select various latin equalizers.
Setting the USER EQ
You can adjust the sound level of Bass and Treble as your preference.
1. Press USER EQ on the unit. “USER EQ” is displayed.
2. Rotate BASS or TREBLE to adjust the sound level.
3. Press USER EQ to save the setting.
3
3
26
Operating
Advanced Operations
Recording to USB
You can record a various sound source to USB.
(CD, AUX, PORTABLE, Tuner, USB)
1. Connect the USB device to the unit.
2. Press FUNCTION to select a Function you want to record.
One track/file recording - You can record to USB after playing a track/file you want.
All tracks/files recording - You can record to USB in full stop status.
Programmed list recording - After showing the
Programmed list, you can record it to USB.
3. Start the recording by pressing USB REC.
-If you connect both USB1 and USB2, press USB
REC when USB1 or USB2 which you want to record blinks in the display window.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
Pausing recording
During recording, press T on the unit or d/M on the remote control to pause recording. Press it again to restart recording.
(Tuner/AUX/PORTABLE only)
To select recording bit rate and speed
1. Press and hold
USB REC
for 3 seconds.
2. Press C/V on the remote control or
Y/U on the unit to select a bit rate.
3. Press USB REC to set.
4. Press C/V on the remote control or
Y/U on the unit to select a desired recording speed. (AUDIO CD only)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press
USB REC to finish the setting.
USB Copying
You can copy audio files in USB 1 to USB 2.
1. Connect a USB device including desired sound files to USB port (1) and select USB 1 Function.
2. Connect another USB device to USB port (2).
3. Press
USB REC
to start recording.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
The making of unauthorized copies of copyprotected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense.
This equipment should not be used for such purposes.
Be responsible
Respect copyrights
,
Note
y You can check the recording percentage rate for the USB record on the display window during the recording. (MP3/WMA,
CD Only) y During recording MP3/WMA, there is no sound.
y For stable recording, the output sound level goes down on its own when you record music from CD to USB.
y You can only change volume level between
MIN and 30 during recording. (Only CD function) y When you stop recording during playback, the file that has been recorded at that time will be stored. (Except MP3/WMA files) y Do not remove the USB device or turn off the unit during USB recording. If does not, an incomplete file may be made and not deleted on PC.
y If USB recording does not work, the message like “NO USB”, “ERROR”, “USB FULL” or “NO REC” is displayed on the display window.
y Multi card reader device or External HDD can not be used for USB recording.
y A file is recorded by about 512 Mbyte when you record for a long term.
Operating
27
,
Note
y You can record various sound using DJ
EFFECT, SCRATCH or MIC. (Except USB
Copying) y You can control recorded MIC sound according to MIC volume.
y You may not store more than 2000 files.
y You can not record in AUTO DJ mode.
y On CD function, sound of MIC, SCRATCH or
DJ EFFECT is recorded only during AUDIO
CD X1 speed REC. It is recorded AUDIO CD source too. y In case of the unsupported MP3/WMA file, the file recording may be stopped.
y It’ll be stored as follows.
AUDIO CD MP3/WMA
The other source* Tuner
* : AUX and the like.
Tuner : The current recording frequency is shown.
3
3
28
Operating
Programmed Playback
The program function enables you to store your favorite files from any disc or USB device.
A program can contain 20 tracks/files for each media. (CD, USB1,USB2) Possible to save a total of
60 tracks/files.
Making Programmed list
It is supported only on stop status.
1. Press PROGRAM/MEMORY on the remote control.
2. Press C/V on the remote control to select a track/file.
3. Press PROGRAM/MEMORY on the remote control to save and select a next track/file.
4. Repeat steps 2 - 3 to store other tracks/files.
(You can modify the list by pressing
PRESET.FOLDER W/S on the remote control to select the program number.)
5. Press PROGRAM/MEMORY on the remote control once again.
To play the programmed list, press d/M after you make the list.
,
Note
When making or modifying the programmed list, REPEAT mode is off.
Deleting Programmed list
Deleting function only works in the edit mode.
1. Press PROGRAM/MEMORY on the remote control in stop status.
2. Select a song by pressing PROGRAM/MEMORY or PRESET.FOLDER W/S on the remote control repeatedly.
3. Press DELETE while a song is selected.
,
Note
y Program is switched off in the case below.
- Changing to a different function.
- Turning off and on the unit.
- Operating the numeric buttons on the remote control.
y Programmed list is cleared in the case
- Removing the disc or the USB device.
below.
- Deleting or recording music files in the
USB device.
- Unplugging the Power Cord.
Other Operations
Turn off the sound temporarily
Press MUTE@ on the remote control to mute your sound.
You can mute your unit, for example, to answer the telephone, the “MUTE” will appear in the display window.
To cancel it, press MUTE@ again or change the volume level.
CHILDSAFE Mode
This function helps to prevent you from being surprised when you turn on the unit in case that the volume of the unit is set at a high level.
To turn on CHILDSAFE mode, press and hold ENTER on the unit when the volume of the unit is “MIN”.
In CHILDSAFE mode, the volume increase gradually.
To turn off CHILDSAFE mode, press and hold ENTER on the unit when the volume of the unit is “MIN” and this mode is turned on.
,
Note
In case of CD, USB or BT function, CHILDSAFE mode does not work after about 2 minutes from power on the unit even if this mode is enabled.
Operating
29
,
Note
y While in DEMO, this unit will keep DEMO status even if you unplug the power cord connection.
y You can enjoy other functions during the
DEMO, the DEMO will temporarily pause.
- Without input key in 10 sec, the DEMO will play back automatically.
Using Microphone
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust the microphone volume by rotating MIC VOL. clockwise or counterclockwise on the unit.
,
Note
y When not using the microphone, set the
MIC VOL. to minimum or turn off the MIC and remove the microphone from the MIC jack.
y If the microphone is set too near the speaker, a howling sound may be produced.
In this case, move the microphone away from the speaker or decrease the sound level by using the MIC VOL..
y If sound through the microphone is extremely loud, it may be distorted. In this case, rotate MIC VOL. to minimum.
Displaying file information
(ID3 TAG)
While playing an MP3 file containing file information, you can display the information by pressing INFO.
DEMO
In the power off state, press X-BOOM PLUS/DEMO on the unit once. The unit will power on and display the each of functions with demo sound in the display window. T o cancel the DEMO function, press X-BOOM PLUS/DEMO once more.
LIGHTING
The function is to create a Club like atmosphere by operating speaker lighting.
1. Press LIGHTING on the unit.
The mode changes each time you press it :
OFF VOLCANO POLICE THUNDER
PSYCHE CAOS OFF
,
Note
y Lighting function is available in all functions.
y Lighting mode retains its previous mode when you first press LIGHTING, press again to change modes.
3
3
30
Operating
Setting the Clock
1. Turn the unit on.
2. Press and hold CLOCK.
3. Select time mode by pressing C/V on the remote control.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press SET to confirm your selection.
5. Select the hours by pressing C/V on the remote control.
6. Press SET.
7. Select the minutes by pressing C/V on the remote control.
8. Press SET.
Setting the Clock through
“Music Flow Bluetooth” App
Install “Music Flow Bluetooth” app on your Android
Your unit’s clock will be automatically synchronized with your device by activating Bluetooth connection through “Music Flow Bluetooth” app.
Using your player as an alarm clock
1. Turn the unit on.
2. Press and hold ALARM.
3. Press C/V on the remote control to change the hours and minutes and press SET to save.
4. Press C/V on the remote control to select function and press SET to save.
- Press C/V on the remote control to select a memory No. when you select Tuner and then, press SET.
If there is no memory No., this step is skipped.
5. Press C/V on the remote control to change the volume and press SET to save. The clock icon “(” shows that the alarm is set.
,
Note
y If you set the clock time, you can check the time by pressing CLOCK even when the player is turned off.
y You can set alarm after you set the clock time.
y If you set the clock time and alarm, you can check the alarm icon “(“ by pressing
CLOCK even when the unit is turned off.
y If you set the clock time and alarm, you can check the alarm icon “(“ and setting informaiton by pressing ALARM even when the unit is turned off.
y You can select ALARM ON/OFF mode by pressing ALARM.
Sleep Timer Setting
Press SLEEP repeatedly to select delay time between 10 and 180 minutes. After the delay time, the unit will be turned off.
To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
,
Note
y You can check the remaining time before the unit is turned off.
y Press SLEEP. The remaining time appears in the display window.
Dimmer
Press SLEEP once. The display window will be darkened by half. To cancel it, press SLEEP repeatedly until dim off.
,
Note
y All the LED turns off when Dimmer is being operated.
Operating
31
Auto power down
This unit will turn itself off to save electricity in the case were the main unit is not connected to an external device and is not used for 20 minutes.
The unit will also turn itself off after six hours if the
Main unit has been connected to another device using the analog inputs.
How to disconnect the wireless network connection or the wireless device.
Turn off the unit by pressing the power button for more than 5 seconds.
AUTO POWER On
This unit automatically turns on by an input source :
LG TV or Bluetooth
If you try to connect your Bluetooth device, this unit turns on and connects your Bluetooth device.
You can play your music.
,
Note
y Depending on the connected device, this function may not operate.
y Depending on the connected device, the unit turns on but Bluetooth function may not be connected.
y If you disconnect Bluetooth connection by this unit, some Bluetooth devices try to connect to the unit continually. Therefore it is recommended to disconnect the connection before turning off the unit.
y If you try to connect to the “Music Flow
Bluetooth” app, Bluetooth function of this unit is turned on.
y If you turn on the unit using LG TV or
Bluetooth function, proper function of this unit is turned on.
y If you have already paired with this unit, automatically this unit can turn on by an input source when this unit is turned off.
y If you turn off the unit by pressing the power button for more than 5 seconds, Auto
Power On function is disabled. To activate it, turn on the unit.
Auto function change
This unit recognizes input signals such as
Bluetooth and LG TV and then changes suitable function automatically.
When you try to connect Bluetooth device
When you try to connect your Bluetooth device to this unit, Bluetooth function is selected. Play your music on the Bluetooth device.
When LG TV is connected
When you turn on your LG TV connected by LG
Sound Sync, this unit changes the function to LG
TV. You can hear the sound from your TV.
,
Note
y This function is not available during recording or deleting.
y This function only works with devices that were previously connected.
3
3
32
Operating
LG Sound Sync
You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with LG TV that supports LG Sound Sync.
Make sure your TV has the LG Sound Sync logo.
Controllable function by LG TV’s remote control :
Volume up/down, mute
Refer to the TV’s instruction manual for the details of
LG Sound Sync.
,
Note
y You can also use the remote control of this unit while using LG Sound Sync. If you use TV’s remote control again, the unit synchronizes with the TV.
y If the connection fails, check the conditions of this unit and your TV : power, function.
y Make sure of the condition of this unit and the connection in the cases below when using LG Sound Sync.
- Turn off the unit.
- Changing to a different function.
- Disconnecting the wireless connection caused by interference or a distance.
y The amount of time to turn off this unit is different depending on your TV.
y If you try to change the function on using the LG TV function, volume will be change according to the LG TV volume level.
y Details of TV setting menu vary depending on the manufacturers or models of your TV.
y If you connect LG Sound Sync when “Music
Flow Bluetooth” app is connected, control through the app is available.
y If you turned off the unit directly by pressing 1
/!(Power), LG Sound Sync will be disconnected. To use this function again, you should reconnect the TV and the unit.
y If an LG TV is connected when using
Bluetooth, Bluetooth is disconnected and the LG TV is connected.
1. Turn on the unit by pressing 1
/!(Power).
2. Press FUNCTION until LG TV function is selected.
3. Set up the sound output of TV to listen to the sound through this unit :
TV setting menu [Sound] -> [TV Sound output]
-> [LG Sound Sync (Wireless)]
“PAIRED” appears on the display window for about 3 seconds and then you can see “LG TV” on the display window if the TV and this unit are connected normally.
4 Troubleshooting
Troubleshooting
33
Troubleshooting
General
Problem
The unit does not work properly.
Cause & Solution
y Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn it on again.
y Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
y Previous setting may not be saved when device power is shut off.
No Power.
No sound.
The unit does not start playback.
y The power cord is not plugged in. Plug in the power cord.
y Check whether electricity failed.
Check the condition by operating other electronic devices.
y Check whether you select right function.
Press FUNCTION and check the selected function.
y Check to see if the Speakers are connected correctly. Speaker cables connected correctly.
y An unplayable disc is inserted. Check the playable disc.
y No disc is inserted. Insert a disc.
y The disc is dirty. Clean the disc. (Refer to page 37)
y The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
y The antenna is positioned or connected poorly.
Connect the antenna securely.
Radio stations cannot be tuned in properly.
y The signal strength of the radio station is too weak.
Tune to the station manually.
y No stations have been preset or preset stations have been cleared (when tuning by scanning preset channels).
Preset some radio stations, see page 24 for details.
y The remote control is too far from the unit.
Operate the remote control within about 23 ft (7 m).
The remote control does not work properly.
y There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
y The batteries in the remote control are exhausted.
Replace the batteries with new ones.
No speaker light y Check whether the speaker light cables are connected to the unit correctly.
Connect the speaker light cables to the unit correctly.
y Check the speaker light effects by pressing LIGHTING.
LG Sound Sync does not work.
y Check whether your LG TV supports LG Sound Sync.
y Check connection of LG Sound Sync.
y Check sound setting of your TV and this unit.
4
5
5 Appendix
34
Appendix
Trademarks and
Licenses
Bluetooth® wireless technology is a system which allows radio contact between electronic devices.
Connecting individual devices under Bluetooth® wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology.
The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by LG Electronics is under license.
Other trademarks and trade names are those of their respective owners.
General specifications
General
Power requirements
Power consumption
Dimensions (W x H x D)
Net Weight (Approx.)
Operating temperature
Operating humidity
Bus Power Supply
Inputs
AUX IN
PORT. IN
MIC
Tuner
FM Tuning Range
AM Tuning Range
Refer to the main label.
Refer to the main label.
Networked standby : 0,4 W
(If all network ports are activated.)
450 mm x 160 mm x 335 mm
5,8 kg
5 °C to 35 °C (41 °F to 95 °F)
60 %
5 V 0 500 mA
2,0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R)
1,2 Vrms (3.5 Ø jack)
27 mV
87,5 to 108,0 MHz or 87,50 to 108,00 MHz
522 to 1 620 kHz, 520 to 1 710 kHz or 522 to 1 710 kHz
CD
Frequency Response
Signal-to-noise ratio
Dynamic range
40 to 20 000 Hz
75 dB
80 dB
Amplifier
Total output
FRONT
REAR
WOOFER
THD
2 500 W
500 W x 2 (6 Ω at 1 kHz)
500 W x 2 (6 Ω at 5 kHz)
500 W x 1 (6 Ω at 70 Hz)
25 % y Design and specifications are subject to change without notice.
Appendix
35
5
5
36
Appendix
Speakers specifications
Front speaker
Type
Impedance
Rated Input Power
Max. Input power
Net Dimensions (W x H x D)
Net Weight
Subwoofer
Type
Impedance
Rated Input Power
Max. Input power
Net Dimensions (W x H x D)
Net Weight
Front : 2 Way 2 Speaker
Surround : 1 Way 1 Speaker
Front : 6 Ω
Surround : 6 Ω
Front : 500 W
Surround : 500 W
Front : 1 000 W
Surround : 1 000 W
321 mm x 454 mm x 301 mm
9,1 kg
1 Way 1 speaker
6 Ω
500 W
1 000 W
326 mm x 454 mm x 285 mm
9,6 kg y Design and specifications are subject to change without notice.
Appendix
37
Maintenance
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center to out.
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for old vinyl records.
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.
Keeping the exterior surfaces clean
Do not use volatile liquids such as insecticide spray near the unit. Wiping with strong pressure may damage the surface. Do not leave rubber or plastic products in contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished.
For details, please contact your nearest authorized service center.
5
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project