8458 - 5168002-031
2011 / 10/17
30
80g 60236 T2
CALL 1-800-377-5888 (USA), 1-800-561-0004 (CNA)
Never allow adults to operate the product without
proper instruction.
lawn mower.
motor and wait until the blade comes to a
complete stop before cleaning the lawn mower,removing
motor and
wait until the
comes
to a
the grass catcher
or unclogging
theblade
discharge
openings.
complete stop before cleaning
the
lawn
mower,removing
opening.
the grass catcher or unclogging the discharge openings.
side discharge deflector,rear discharge door,
or other safety protective devices properly in place.
can
slipping or falling hazard.
while operating the mower.
while operating the mower.
thrown
Stop the lawn mower and release the switch control bail wire.
and wait until the blade comes to
complete stop before removing the grass catcher or
openings.
grass catcher or unclogging the discharge
openings.The cutting blade
to determine if the
charger is in good working order.
, remove the switch key and check immediately for the
cause. Vibration is generally a warning of trouble.
and/
be
, which could result
of the plug on the charger.
loan someone this mower,
SWITCH KEY
allow
the blade to cut and recut the grass for finer clippings.
,
,do not return
to store. Please call 1-800-377-5888 (USA),
1-800-561-0004 (CNA) for assistance.
HANDLE KNOBS
UPPER
HANDLE
LOWER
HANDLE
one
Two
36
15
15
Excessive charging can affect the capacity and
discharge time of the battery.
CHARGING WHEN BATTERY REMOVED
FROM MOWER
2 charger connector into the receptacle on the
Insert the
battery case.
Store mower in a secure location out of the reach
of children.
indicator lights
show charge is complete .
Insert the switch key into the slot on the motor/ blade
control assembly.
Push the button on switch box and hold to allow access
to the switch bail wire.
Pull the switch control bail wire toward the mower handle
and let go of the switch button. Continue to hold the switch
control bail wire against the mower handle as you mow.
to lock in place.
To stop the mower, release the switch control bail wire.
SWITCH KEY
PUSH
environment
REPLACING THE CUTTING BLADE
See Figure 12-13.
Remove the battery pack from the mower.
REPLACING WHEELS
See Figure 16.
To replace a wheel:
Stop the motor and remove the switch key.
Remove battery from the battery compartment.
Remove the switch key and store in a secure location
out of the reach of children.
HANDLE KNOBS
UPPER
HANDLE
LOWER
HANDLE
when
the mower is not in use for optimum performance.If the battery has
1-800-377-5888 (USA), 1-800-561-0004 (CNA)
SA)
7-5888 (U
1-800-37 -0004 (CNA)
1
1-800-56
MODEL 60236 T2
Call us first with questions about operating or maintaining your lawn mower at 1-800-377-5888 (USA),
1-800-561-0004 (CNA) between 7:30 a.m. - 4:30 p.m. Eastern Standard Time, or send emails to
earthwise
earthwise@reelin.com.
60236 T2
SERVICE
For parts or service, contact your nearest Earthwise authorized service dealer. Be sure to provide
all relevant information when you call or visit. For the location of the authorized service dealer
nearest you, please call 1-800-377-5888 (USA), 1-800-561-0004 (CNA) or visit us online at
www.americanlawnmower.com.
REPAIR PARTS
The model number of this tool is found on a plate or label attached to the housing. Please
record the serial number in the space provided below.
MODEL NUMBER
60236 T2
SERIAL NUMBER
Phone 1-800-377-5888 (USA)
1-800-561-0004
(CNA)
earthwise
www.americanlawnmower.com