HP | Pavilion dm4 | System information | HP Pavilion dm4 System information

HP Pavilion dm4 Entertainment PC
Maintenance and Service Guide
© Copyright 2011 Hewlett-Packard
Development Company, L.P.
Bluetooth is a trademark owned by its
proprietor and used by Hewlett-Packard
Company under license. Intel, Core, and
Centrino are trademarks of Intel
Corporation in the U.S. and other countries.
Microsoft and Windows are U.S. registered
trademarks of Microsoft Corporation. SD
Logo is a trademark of its proprietor.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
Third Edition: December 2011
First Edition: May 2011
Document Part Number: 639435-003
Safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not
place the computer directly on your lap or obstruct the computer air vents. Use the computer only on
a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to
contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer
and the AC adapter comply with the user-accessible surface temperature limits defined by the
International Standard for Safety of Information Technology Equipment (IEC 60950).
iii
iv
Safety warning notice
Table of contents
1 Product description ........................................................................................................................................ 1
2 External component identification ................................................................................................................ 5
Top ....................................................................................................................................................... 5
TouchPad ............................................................................................................................ 5
Lights ................................................................................................................................... 6
Buttons ................................................................................................................................. 7
Keys ..................................................................................................................................... 8
Front ..................................................................................................................................................... 9
Right side ............................................................................................................................................. 9
Left side .............................................................................................................................................. 10
Display ................................................................................................................................................ 11
Rear .................................................................................................................................................... 12
Bottom ................................................................................................................................................ 12
3 Illustrated parts catalog ............................................................................................................................... 13
Serial number location ........................................................................................................................ 13
Computer major components ............................................................................................................. 14
Display assembly components ........................................................................................................... 19
Plastics Kit .......................................................................................................................................... 20
Mass storage devices ......................................................................................................................... 21
Miscellaneous parts ............................................................................................................................ 22
Sequential part number listing ............................................................................................................ 23
4 Removal and replacement procedures ....................................................................................................... 29
Preliminary replacement requirements ............................................................................................... 29
Tools required .................................................................................................................... 29
Service considerations ....................................................................................................... 29
Plastic parts ....................................................................................................... 29
Cables and connectors ..................................................................................... 30
Drive handling ................................................................................................... 30
v
Grounding guidelines ......................................................................................................... 31
Electrostatic discharge damage ........................................................................ 31
Packaging and transporting guidelines ............................................. 32
Workstation guidelines ..................................................................... 32
Equipment guidelines ....................................................................... 33
Component replacement procedures ................................................................................................. 34
Serial number .................................................................................................................... 34
Computer feet .................................................................................................................... 35
Battery ............................................................................................................................... 36
Memory module ................................................................................................................. 37
RTC battery ....................................................................................................................... 39
WLAN module .................................................................................................................... 40
Hard drive .......................................................................................................................... 43
Optical drive ....................................................................................................................... 45
Keyboard ........................................................................................................................... 47
Top cover ........................................................................................................................... 49
Fingerprint reader board .................................................................................................... 53
Power button board ........................................................................................................... 55
Display assembly ............................................................................................................... 56
USB board ......................................................................................................................... 63
Power connector cable ...................................................................................................... 64
Bluetooth module ............................................................................................................... 66
Speaker assembly ............................................................................................................. 68
System board ..................................................................................................................... 70
Fan/heat sink assembly ..................................................................................................... 72
Processor ........................................................................................................................... 77
5 Setup Utility ................................................................................................................................................... 79
Starting Setup Utility ........................................................................................................................... 79
Using Setup Utility .............................................................................................................................. 79
Changing the language of Setup Utility ............................................................................. 79
Navigating and selecting in Setup Utility ............................................................................ 80
Displaying system information ........................................................................................... 80
Restoring default settings in Setup Utility .......................................................................... 80
Exiting Setup Utility ............................................................................................................ 81
Setup Utility menus ............................................................................................................................ 82
Main menu ......................................................................................................................... 82
Security menu .................................................................................................................... 82
System Configuration menu .............................................................................................. 82
Diagnostics menu .............................................................................................................. 83
vi
6 Specifications ................................................................................................................................................ 84
Computer specifications ..................................................................................................................... 84
35.56 cm (14.0 in) display specifications ............................................................................................ 85
Hard drive specifications .................................................................................................................... 86
DVD±RW SuperMulti Double-Layer Drive specifications ................................................................... 87
System resource specifications .......................................................................................................... 88
7 Backup and recovery .................................................................................................................................... 89
Restore ............................................................................................................................................... 90
Creating restore media ....................................................................................................................... 90
Performing a system restore .............................................................................................................. 91
Restoring using the dedicated recovery partition (select models only) .............................. 91
Restoring using the restore media ..................................................................................... 92
Changing the computer boot order .................................................................................... 92
Backing up and recovering your information ...................................................................................... 93
Using Windows Backup and Restore ................................................................................ 94
Using Windows system restore points ............................................................................... 95
When to create restore points ........................................................................... 95
Create a system restore point ........................................................................... 95
Restore to a previous date and time ................................................................. 95
8 Recycling ....................................................................................................................................................... 96
Battery ................................................................................................................................................ 96
Display ................................................................................................................................................ 96
Index ................................................................................................................................................................. 102
vii
viii
1
Product description
Category
Description
Discrete
UMA
Product Name
HP Pavilion dm4 Entertainment PC
√
√
Processors
Intel® Core™ i7 processor
√
√
i5-2540M Dual-Core processor (2.6 GHz, SC turbo
up to 3.3 GHz), 3 MB L3 cache, 35 W
√
√
i5-2520M Dual-Core processor (2.5 GHz, SC turbo
up to 3.2 GHz), 3 MB L3 cache, 35 W
√
√
i5-2430M Dual-Core processor (2.4 GHz, SC turbo
up to 3.0 GHz), 3 MB L3 cache, 35 W
√
√
i5-2410M processor (2.3 GHz, turbo up to 2.9 GHz),
3 MB L3 cache, 35 W
√
√
i7-2620M Dual-Core processor (2.7 GHz, SC turbo
up to 3.40 GHz), 4 MB L3 cache, 35 W
Intel Core i5 processors
Intel Core i3 processors
i3-2330M Dual-Core processor (2.2 GHz), 3 MB L3
cache, 35 W (soldered to system board)
√
i3-2310M Dual-Core processor (2.1 GHz), 3 MB L3
cache, 35 W (soldered to system board)
√
Chipset
Intel HM65 Express
√
Graphics
Switchable discrete graphics (HD Decode, DX11,
and HDMI)
√
√
ATI Radeon™ HD 6470M) with 1024MB of
dedicated video memory (128M x16 DDR3, 900
MHz x 4 PCs)
Internal Intel HD Graphics
√
HD Graphics 3000 (Intel HM65)
Panel
Memory
35.56 cm (14.0 in) HD LED BrightView (1366 x 768
resolution)
√
√
16:9 ultra wide aspect ratio
√
√
Typical brightness: 200 nits
√
√
2 SODIMM slots
√
√
1
Hard drives
Optical drives
Customer-accessible and upgradable
√
√
Supports up to 8 GB of system memory
√
√
DDR3-1333MHz dual channel support
√
√
Supports the following configurations:
√
√
HP ProtectSmart Hard Drive Protection
√
√
Supports the following 9.5 mm, 6.35 cm (2.5 in)
SATA hard drives
√
√
Supports the following solid-state drive:
√
√
●
√
√
√
√
HP TrueVision HD
√
√
Fixed (no tilt), activity LED
√
√
1280 × 800 by 30 frames per second
√
√
One microphone, digital (software included)
√
√
Echo cancellation and noise suppression
√
√
Dolby Home Theater, HD audio
√
√
Supports Microsoft Premium requirements
√
√
Altec Lansing speakers (2)
√
√
Integrated 10/100/1000 network interface card (NIC)
√
√
●
8192 MB (4096 MB x 2) (No support for 32 bit
operating systems)
●
6144 MB (2048 MB x 1 + 4096 MB x 1) (No
support for 32 bit operating systems)
●
4096 MB (2048 MB x 2)
●
4096 MB (4096 MB x 1)
●
3072 MB (1024 MB x 1 + 2048 MB x 1)
●
2048 MB (2048 MB x 1)
●
2048 MB (1024 MB x 2)
●
1024 MB (1024 MB x 1) (No support for
Microsoft Windows 7, 64 bit)
●
750 GB, 7200 rpm
●
640 GB, 7200 rpm
●
500 GB, 7200 rpm
●
320 GB, 7200 rpm
160 GB
Supports the DVD±R/RW SuperMulti Double-Layer
Drive (9.5 mm tray load, fixed, SATA) (select
models only)
Optical drive weight saver available for non-ODD
models
Camera
Microphone
Audio
Ethernet
2
Chapter 1 Product description
Wireless
Integrated wireless local area network (WLAN)
options by way of wireless module:
√
√
Intel Centrino Wireless-N 1000 802.11b/g/n 1x2 with
WiDi support
√
√
Intel Centrino advanced wireless-N 1030 +
Bluetooth® combo 802.11b/g/n 1x2 with WiDi
support
√
√
Intel Centrino Advanced–N + WiMAX 6150, 802.11
b/g/n with WiDi support
√
√
Intel Centrino Advanced–N + WiMAX 6150 +
Bluetooth 802.11 b/g/n with WiDi support
√
√
Realtek RTL8191SE 802.11b/g/n 1x1 WiFi Adapter
√
√
Ralink 5390GN 802.11b/g/n 1x1 WiFi Adapter
√
√
Atheros AR9002WB-1NGB 802.11b/g/n 1x1 WiFi
and Bluetooth 2.1+EDR Combo Adapter (BT3.0+HS
ready)
√
√
Realtek RTL8188CE 802.11b/g/n WiFi with Realtek
CSRBC4 Bluetooth 2.1+EDR Adapter
√
√
Atheros 9485GN 802.11b/g/n 1x1 WiFi and 3012
Bluetooth 4.0 Combo Adapter
√
√
Broadcom 4313GN 802.11b/g/n 1x1 WiFi and
20702 Bluetooth 4.0 Combo Adapter
√
√
External media card
Digital Media Slot; supports SD/SDHC/SDXC, MMC
√
√
Internal media card
expansion
One half-size mini-card slot for WLAN
√
√
Ports
VGA (Dsub 15-pin) supporting:
√
√
Hot plug/unplug and auto detect for wide-aspect or
standard-aspect video
√
√
HDMI v1.4 supporting up to 1080p, 1920 x 1200 @
60 Hz DVI mode
√
√
USB 2.0 (4)
√
√
RJ-45
√
√
Audio in (microphone)
√
√
Audio-out (headphone)
√
√
Smart-pin AC adapter plug
√
√
35.56 cm (14.0 inch) full-size keyboard
√
√
Dura-coat island style keyboard
√
√
TouchPad with tab cover (taps and multitouch
gestures (2-finger scrolling, taps, and pinch zoom
enabled by default)
√
√
2048 x 1536 resolution at 75 Hz
Keyboard/pointing devices
Power requirements
Batteries
3
Supports battery fast charge
√
9-cell (100 Whr) 3.0 Ah Li-ion battery
√
√
6-cell (62-Whr) 2.80Ah Li-ion battery
√
√
6-cell (55-Whr) 2.55 Ah Li-ion battery
√
√
AC Adapters
65 W AC adapter with Smart-Pin DC connector
Security
Operating system
Serviceability
4
Chapter 1 Product description
√
90 W AC adapter with Smart-Pin DC connector
√
Kensington Security Lock
√
√
Fingerprint reader with Digital Persona Software
Support
√
√
OTP (VeriSign) support
√
√
Intel AT-p ready support
√
√
Microsoft Windows 7 Professional (32 and 64 bit)
√
√
Microsoft Windows 7 Home Premium (32 and 64
bit)
√
√
Microsoft Windows 7 Home Basic (32 and 64 bit)
√
√
Microsoft Windows 7 Starter (32 bit), (No support for
HDD 320 GB)
√
√
FreeDOS
√
√
RedFlag
√
√
End-user replaceable parts:
√
√
AC adapter
√
√
Battery (system)
√
√
Hard drive
√
√
Memory module
√
√
Optical drive
√
√
Mini-card device
√
√
Preinstalled:
2
External component identification
Top
TouchPad
Component
Description
(1)
TouchPad light
Turns the TouchPad on and off. Quickly double-tap the
TouchPad light to turn the TouchPad on and off.
(2)
TouchPad zone
Moves the pointer and selects or activates items on the
screen.
(3)
Left TouchPad button
Functions like the left button on an external mouse.
(4)
Right TouchPad button
Functions like the right button on an external mouse.
Top
5
Lights
Component
(1)
Description
Power light
●
White: Power is on.
●
Blinking white: The computer is in the Sleep state.
●
Off: The computer is off or in Hibernation.
NOTE: Another power light is located on the left side of
the computer.
(2)
(3)
(4)
(5)
(6)
6
Mute light
Wireless light
Caps lock light
TouchPad light
Fingerprint reader light
Chapter 2 External component identification
●
Amber: Computer sound is off.
●
Off: Computer sound is on.
●
White: An integrated wireless device, such as a
wireless local area network (WLAN) device and/or a
Bluetooth® device, is on.
●
Amber: All wireless devices are off.
●
White: Caps lock is on.
●
Off: Caps lock is off.
●
Amber: The TouchPad is off.
●
Off: The TouchPad is on.
●
White: Fingerprint read is good.
●
Amber: Fingerprint read is bad.
Buttons
Component
(1)
Description
Power button
●
When the computer is off, press the button to turn on
the computer.
●
When the computer is on, press the button briefly to
initiate Sleep.
●
When the computer is in the Sleep state, press the
button briefly to exit Sleep.
●
When the computer is in Hibernation, press the button
briefly to exit Hibernation.
If the computer has stopped responding and Windows®
shutdown procedures are ineffective, press and hold the
power button for at least 5 seconds to turn off the computer.
To learn more about your power settings, select Start >
Control Panel > System and Security > Power Options,
or refer to the HP Notebook Reference Guide.
(2)
Fingerprint reader
Allows a fingerprint logon to Windows, instead of a
password logon.
Top
7
Keys
Component
8
Description
(1)
esc key
Displays system information when pressed in combination
with the fn key.
(2)
fn key
Executes frequently used system functions when pressed
in combination with the esc key.
(3)
Windows logo key
Displays the Windows Start menu.
(4)
Windows applications key
Displays a shortcut menu for items beneath the pointer.
(5)
Action keys
Execute frequently used system functions.
Chapter 2 External component identification
Front
Component
Description
(1)
Supports the following digital card formats:
(2)
Digital Media Slot
Speakers (2)
●
MultiMedia card
●
Secure Digital (SD) card
●
Secure Digital High Capacity (SDHC) Memory card
(standard and large size)
Produce sound.
Right side
Component
(1)
(2)
Description
Optical drive light
Optical drive (select models only)
●
On: The optical drive is being accessed.
●
Off: The optical drive is idle.
Reads and writes to an optical disc.
Optical drive weight saver option
(3)
USB ports (2)
Connect optional USB devices.
(4)
Battery light
●
White: The computer is connected to external power
and the battery is fully charged.
●
Amber: A battery is charging.
●
Blinking: The battery has reached a low or critical
battery level or there is a battery error.
(5)
Power connector
Connects an AC adapter.
Front
9
Left side
Component
(1)
Description
Security cable slot
Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a
deterrent, but it may not prevent the computer from being
mishandled or stolen.
(2)
External monitor port
Connects an external VGA monitor or projector.
(3)
Audio in (microphone) jack
Connects an optional computer headset microphone,
stereo array microphone, or monaural microphone.
(4)
Audio-out (headphone) jack
Produces sound when connected to optional powered
stereo speakers, headphones, ear buds, a headset, or
television audio.
WARNING! To reduce the risk of personal injury, adjust
the volume before putting on headphones, earbuds, or a
headset. For additional safety information, refer to the
Regulatory, Safety and Environmental Notices.
NOTE: When a device is connected to the jack, the
computer speakers are disabled.
(5)
Drive light
●
Blinking white: The hard drive is being accessed.
●
Amber: HP ProtectSmart Hard Drive Protection has
temporarily parked the hard drive.
NOTE: For information on HP ProtectSmart Hard
Drive Protection, refer to the HP Notebook Reference
Guide.
(6)
(7)
Power light
Vents (3)
●
White: The computer is on.
●
Blinking white: The computer is in the Sleep state.
●
Off: The computer is off or in Hibernation.
Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
10
Chapter 2 External component identification
Component
(8)
Description
RJ-45 (network) lights
●
White: The network is connected.
●
Amber: The network is showing activity.
(9)
RJ-45 (network) jack
Connects a network cable.
(10)
HDMI port
Connects an optional video or audio device, such as a
high-definition television, or any compatible digital or audio
component.
(11)
USB port
Connects optional USB devices.
Display
Component
Description
(1)
WLAN antennas (2)
Send and receive wireless signals to communicate with wireless
local area networks (WLAN).
(2)
Internal microphone
Records sound.
(3)
Webcam
Records video and captures still photographs.
To use the webcam, select Start > All Programs > Cyberlink
Youcam.
(4)
Webcam light
On: The webcam is in use.
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately
around the antennas free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety
and Environmental Notices that applies to your country or region. These notices are located in Help and Support.
Display
11
Rear
Component
Description
Vent
Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool internal
components and prevent overheating. It is normal for the internal fan
to cycle on and off during routine operation.
Bottom
Component
Description
(1)
Battery bay
Holds the battery.
(2)
Battery release latch
Releases the battery from the battery bay.
(3)
Vents (5)
Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
12
(4)
Hard drive bay
Holds the hard drive.
(5)
Memory module compartment
Contains the memory module slots.
Chapter 2 External component identification
3
Illustrated parts catalog
Serial number location
When ordering parts or requesting information, provide the computer serial number and model
number located in the battery bay of the computer.
●
Product name (1). This is the product name affixed to the front of the computer.
●
Serial number (s/n) (2). This is an alphanumeric identifier that is unique to each product.
●
Part number/Product number (p/n) (3). This number provides specific information about the
product's hardware components. The part number helps a service technician to determine what
components and parts are needed.
●
Warranty period (4). This number describes the duration (in years) of the warranty period for the
computer.
●
Model description (5). This is the alphanumeric identifier used to locate documents, drivers, and
support for the computer.
Serial number location
13
Computer major components
14
Chapter 3 Illustrated parts catalog
Item
Description
Spare part number
(1)
35.56 cm (14.0 in), SVA, high-definition (HD), BrightView LED display assembly
NOTE: See Display assembly components on page 19 for more display assembly
internal component spare part information.
(2)
For use in Dark Umber models
636941-001
For use in Steel Gray models
650675-001
Keyboards
NOTE: For a detailed list of available keyboards, see Sequential part number listing on page 23.
(3)
Standard
608222-xxx
QuickWeb
663563-xxx
Top cover (includes TouchPad)
For use in Dark Umber models
636946-001
For use in Steel Gray models
650676-001
(4)
Power button board (includes cable)
658706-001
(5)
Fingerprint reader board
608225-001
(6)
Speaker assembly (includes cable)
608232-001
(7)
USB board (includes cable)
658707-001
(8)
Power connector cable (includes power connector and cable)
608273-001
(9)
System board (includes replacement thermal material)
(10)
For use in models equipped with 1 GB of discrete HD6470 graphics memory
636944-001
For use in models equipped with HM65 UMA graphics memory
636945-001
For use in models equipped with HM65 UMA graphics; includes Intel Core i3 2330M
processor
642732-001
For use in models equipped with HM65 UMA graphics memory; includes Intel Core i3
2310M processor
656092-001
Processor (includes replacement thermal material)
2nd Generation Intel Core i7 processor
●
i7-2620M processor (2.7-Hz SC turbo up to 3.4 GHz), 4 MB L3 cache 35 W
631252-001
Intel Core i5 processors
(11)
●
i5-2540M processor (2.6 GHz, SC turbo up to 3.3 GHz), 3 MB L3 cache, 35 W
631255-001
●
i5-2520M processor (2.5 GHz, SC turbo up to 3.2 GHz), 3 MB L3 cache, 35 W
631253-001
●
i5-2430M processor (2.4 GHz, SC turbo up to 3.3 GHz), 3 MB L3 cache, 35 W
653341-001
●
i5-2410M processor (2.3 GHz, SC turbo up to 2.9 GHz), 3 MB L3 cache, 35 W
638039-001
Fan/heatsink assembly (includes replacement thermal material)
For use in UMA models in which the processor is not soldered to the system board
636940-001
For use in UMA models in which the processor is soldered to the system board
642731-001
Computer major components
15
Item
(12)
Description
Spare part number
For use in models equipped with discrete graphics
636939-001
Bluetooth module
537921-001
NOTE: The Bluetooth module cable is included in the Cable Kit, spare part number
608227-001.
WLAN modules (not illustrated)
Intel Centrino wireless-N 1000 802.11b/g/n 1x2 with WiDi support
593530-001
For use in Argentina, Bolivia, Brazil, Canada (French/English), Chile, Columbia, Costa
Rica, Ecuador, El Salvador, Guadeloupe, Guatemala, Honduras, Mexico, Nicaragua,
Panama, Paraguay, Peru, the United States, Uruguay, and Venezuela.
Intel Centrino advanced wireless-N 1030 + Bluetooth® combo 802.11b/g/n 1x2
with WiDi support
631956-001
For use in Algeria, Argentina, Bahrain, Belarus, Belgium, Bolivia, Brazil, Bulgaria,
Cameron, Canada (French/English), Chad, Chile, Columbia, Costa Rica, Croatia,
Cyprus, Ecuador, Egypt, El Salvador, Estonia, France, Guadeloupe, Guatemala,
Guyane Francaise, Honduras, Ivory Coast, Jordan, Kuwait, Latvia, Lebanon, Martinique,
Mayotte, Mexico, Montenegro, Morrocco, Nambia, Nicaragua, Nouvelle Caledoni,
Oman, Panama, Paraguay, Peru, Polynesie Francais, Portugal, Qatar, Reunion,
Romania, Russia, Sao Some & principe, Saudi Arabia, Senegal, South Africa, Spain, St.
Pierre et Miquel, Switzerland, the United States, Tunisia, Turkey, UAE, United Kingdom,
Uruguay, Venezuela, Wallis et Futuna, and Yemen.
Intel Centrino Advanced–N + WiMAX 6150, 802.11 b/g/n with WiDi support (+
Bluetooth
633817-001
For use in the United States.
Realtek 8188GN 802.11b/g/n 1x1 WiFi Adapter
640926-001
For use in Algeria, Argentina, Bahrain, Belarus, Belgium, Bolivia, Brazil, Bulgaria,
Cameron, Canada (French/English), Chad, Chile, Columbia, Costa Rica, Croatia,
Cyprus, Ecuador, Egypt, El Salvador, Estonia, France, Guadeloupe, Guatemala,
Guyane Francaise, Honduras, Ivory Coast, Jordan, Kuwait, Latvia, Lebanon, Martinique,
Mayotte, Mexico, Montenegro, Morrocco, Nambia, Nicaragua, Nouvelle Caledoni,
Oman, Panama, Paraguay, Peru, Polynesie Francais, Portugal, Qatar, Reunion,
Romania, Russia, Sao Some & principe, Saudi Arabia, Senegal, South Africa, Spain, St.
Pierre et Miquel, Switzerland, the United States, Tunisia, Turkey, UAE, United Kingdom,
Uruguay, Venezuela, Wallis et Futuna, and Yemen.
Ralink 5390GN 802.11 b/g/n 1x1 WiFi Adapter
For use in Algeria, Argentina, Bahrain, Belarus, Belgium, Bolivia, Brazil, Bulgaria,
Cameron, Canada (French/English), Chad, Chile, Columbia, Costa Rica, Croatia,
Cyprus, Ecuador, Egypt, El Salvador, Estonia, France, Guadeloupe, Guatemala,
Guyane Francaise, Honduras, Ivory Coast, Jordan, Kuwait, Latvia, Lebanon, Martinique,
Mayotte, Mexico, Montenegro, Morrocco, Nambia, Nicaragua, Nouvelle Caledoni,
Oman, Panama, Paraguay, Peru, Polynesie Francais, Portugal, Qatar, Reunion,
Romania, Russia, Sao Some & principe, Saudi Arabia, Senegal, South Africa, Spain, St.
Pierre et Miquel, Switzerland, the United States, Tunisia, Turkey, UAE, United Kingdom,
Uruguay, Venezuela, Wallis et Futuna, and Yemen.
16
Chapter 3 Illustrated parts catalog
630703-001
Item
Description
Spare part number
Atheros AR9002WB-1NGB 802.11 b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo
Adapter (BT3.0+HS ready)
593127-001
For use in Algeria, Argentina, Bahrain, Belarus, Belgium, Bolivia, Brazil, Bulgaria,
Cameron, Canada (French/English), Chad, Chile, Columbia, Costa Rica, Croatia,
Cyprus, Ecuador, Egypt, El Salvador, Estonia, France, Guadeloupe, Guatemala,
Guyane Francaise, Honduras, Ivory Coast, Jordan, Kuwait, Latvia, Lebanon, Martinique,
Mayotte, Mexico, Montenegro, Morrocco, Nambia, Nicaragua, Nouvelle Caledoni,
Oman, Panama, Paraguay, Peru, Polynesie Francais, Portugal, Qatar, Reunion,
Romania, Russia, Sao Some & principe, Saudi Arabia, Senegal, South Africa, Spain, St.
Pierre et Miquel, Switzerland, the United States, Tunisia, Turkey, UAE, United Kingdom,
Uruguay, Venezuela, Wallis et Futuna, and Yemen.
Realtek RTL8188CE 802.11 b/g/n WiFi with Realtek CSRBC4 Bluetooth 2.1+EDR
Adapter
602993-001
For use in Algeria, Argentina, Bahrain, Belarus, Belgium, Bolivia, Brazil, Bulgaria,
Cameron, Canada (French/English), Chad, Chile, Columbia, Costa Rica, Croatia,
Cyprus, Ecuador, Egypt, El Salvador, Estonia, France, Guadeloupe, Guatemala,
Guyane Francaise, Honduras, Ivory Coast, Jordan, Kuwait, Latvia, Lebanon, Martinique,
Mayotte, Mexico, Montenegro, Morrocco, Nambia, Nicaragua, Nouvelle Caledoni,
Oman, Panama, Paraguay, Peru, Polynesie Francais, Portugal, Qatar, Reunion,
Romania, Russia, Sao Some & principe, Saudi Arabia, Senegal, South Africa, Spain, St.
Pierre et Miquel, Switzerland, the United States, Tunisia, Turkey, UAE, United Kingdom,
Uruguay, Venezuela, Wallis et Futuna, and Yemen.
Broadcom 4313/2070 802.11b/g/n (1x1) and Bluetooth high-speed Half Mini Card
600370-001
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, the Cayman
Islands, Central African Republic, Chad, Chile, the People's Republic of China,
Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, Czech Republic, Denmark,
Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana,
Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe,
Guam, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Indonesia, Iraq, Ireland, Israel, Italy, Ivory Coast, Jamaica,
Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon,
Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar,
Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania,
Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique,
Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua,
Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea,
Paraguay, Peru, Philippines, Poland, Portugal, Puerto Rico, Qatar, the Republic of
Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia and Montenegro, Seychelles, Sierra Leone, Singapore,
Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, Sri Lanka, St.
Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland,
Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad
and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab
Emirates, the United Kingdom, the United States, Uruguay, the US Virgin Islands,
Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
(13)
Atheros 9485GN 802.11b/g/n 1x1 WiFi and 3012 Bluetooth 4.0 Combo Adapter
655795-001
Broadcom 4313GN 802.11b/g/n 1x1 WiFi and 20702 Bluetooth 4.0 Combo Adapter
657325-001
Memory modules (PC3-10600, 1333 MHz)
2 GB
621565-001
Computer major components
17
Item
(14)
Description
Spare part number
4 GB
621569-001
Battery
9-cell, 100 WHr (3.0 Ah) Li-ion
636631-001
6-cell, 62 WHr (2.80 Ah) Li-ion
593562-001
6-cell, 55 WHr (2.55 Ah) Li-ion
593554-001
(15)
Base enclosure (includes modem cable and optical drive cable)
636937-001
(16)
Hard drive (includes hard drive bracket)
NOTE: The hard drive cable is included in the Cable Kit, spare part number 608227-001.
(17)
18
750 GB, 7200 rpm
678103-001
640 GB, 7200 rpm
678102-001
500 GB, 7200 rpm
678101-001
320 GB, 7200 rpm
678100-001
160 GB solid-state drive
608215-001
DVD±RW SuperMulti DL Drive (12.7 mm optical drive, fixed) (select models only)
677742-001
Optical drive weight saver (not illustrated)
660550-001
Chapter 3 Illustrated parts catalog
Display assembly components
Item
Description
Spare part number
(1)
Display bezel
636938-001
(2)
Webcam module
615744-001
(3)
Display panel (35.56 cm (14.0 in) Brightview, high-definition; includes display panel
cable)
608206-001
Display Cable Kit
608211-001
(4a)
Webcam cable
Display assembly components
19
Item
Description
Spare part number
(4b)
Antennas and cables
(5)
Display hinge covers
608210-001
(6)
Display bracket
608214-001
(7)
Display back cover
For use in Dark Umber computer models
636936-001
For use in Steel Gray computer models
650674-001
Display Screw Kit (not illustrated; includes screws and screw covers)
608212-001
Plastics Kit
Item
20
Description
Spare part number
Plastics Kit
636942-001
(1)
Wireless/memory module mini-card compartment cover (includes captive screw)
(2)
Hard drive bay cover (includes captive screws)
Chapter 3 Illustrated parts catalog
Mass storage devices
Item
Description
(1)
Optical drive (12.7 mm, SATA, fixed)
(2)
Spare part number
DVD±RW SuperMulti DL Drive (select models only)
677742-001
Optical drive weight saver
660550-001
Hard drive (include hard drive bracket)
NOTE:
The hard drive cable is included in the Cable Kit, spare part number 608227-001.
750 GB, 7200 rpm
678103-001
640 GB, 7200 rpm
678102-001
500 GB, 7200 rpm
678101-001
320 GB, 7200 rpm
678100-001
160 GB solid-state drive (not illustrated)
608215-001
Hard drive mounting hardware
672516-001
Mass storage devices
21
Miscellaneous parts
Description
Spare part number
AC adapters
90 W Smart AC adapter, RC/V 3W
609940-001
65 W Smart AC adapter, RC/V 3W
609939-001
Power cord, AC, 3 wire, black, 1.83 m
22
For use in Argentina
490371-D01
For use in Brazil
490371-202
For use in the People's Republic of China
490371-AA1
For use in Denmark
490371-081
For use in Europe, the Middle East, and Africa
490371-021
For use in Italy
490371-061
For use in North America
490371-001
For use in Switzerland
490371-111
For use in the United Kingdom and Singapore
490371-031
Thermal pad kit
634366-001
RTC battery
449137-001
Rubber feet
608228-001
Screw Kit
608234-001
●
Phillips M2.0x2.0 broadhead screw
●
Phillips M2.0x3.0 screw
●
Phillips M2.0x4.0 screw
●
Phillips M2.0x5.0 screw
●
Phillips M2.5x5.0 screw
●
Phillips M2.5x6.5 screw
●
Phillips M2.5x7.0 screw
●
Phillips M3.0x3.0 screw
Chapter 3 Illustrated parts catalog
Sequential part number listing
Spare part
number
Description
449137-001
RTC battery
490371-001
Power cord, AC, 3-pin, black, 1.83 m, for use in North America
490371-021
Power cord, AC, 3-pin, black, 1.83 m, for use in Europe, the Middle East, and Africa
490371-031
Power cord, AC, 3-pin, black, 1.83 m, for use in the United Kingdom and Singapore
490371-061
Power cord, AC, 3-pin, black, 1.83 m, for use in Italy
490371-081
Power cord, AC, 3-pin, black, 1.83 m, for use in Denmark
490371-111
Power cord, AC, 3-pin, black, 1.83 m, for use in Switzerland
490371-202
Power cord, AC, 3-pin, black, 1.83 m, for use in Brazil
490371-D01
Power cord, AC, 3-pin, black, 1.83 m, for use in Argentina
537921-001
Bluetooth module without cable (For use in the United States)
593127-001
Atheros AR9002WB-1NGB 802.11 b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter (BT3.0+HS
ready)
For use in Albania, Algeria, Andorra, Angola, Argentina, Azerbaijan, Austria, Bahrain, Belarus,
Belgium, Bolivia, Bosnia, Botswana, Brazil, Bulgaria, Cameroon, Canada (French/English), Chad,
Chile, Columbia, Costa Rica, Croatia, Cyprus, Czech Republic, Denmark, Ecuador, Egypt, El Salvador,
Estonia, Finland, France, Georgia, Germany, Ghana, Gibraltar, Greece, Guadeloupe, Guatemala,
Guyane Francaise, Honduras, Hungary, Iceland, Israel, Italy, Ivory Coast, Jordan, Kazakhstan, Kenya,
Kuwait, Latvia, Lebanon, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macedonia, Martinique,
Mayotte, Mauritius, Mexico, Moldova, Monaco, Montenegro, Morocco, Nambia, Netherlands,
Nicaragua, Nigeria, Norway, Nouvelle Caledoni, Oman, Panama, Paraguay, Peru, Poland, Polynesie
Francais, Portugal, Qatar, Reunion, Romania, Russia, San Marino, Sao Tome and principe, Saudi
Arabia, Senegal, Slovenia, South Africa, Spain, St. Pierre et Miquel, Swaziland, Sweden, Switzerland,
Tanzania, the United States, Tunisia, Turkey, UAE, Uganda, United Kingdom, Uruguay, Venezuela,
Wallis et Futuna, and Yemen.
593530-001
Intel Centrino wireless-N 1000 802.11b/g/n 1x2 with WiDi support
For use in Argentina, Bolivia, Brazil, Canada (French/English), Chile, Columbia, Costa Rica, Ecuador,
El Salvador, Guadeloupe, Guatemala, Honduras, Mexico, Nicaragua, Panama, Paraguay, Peru, the
United States, Uruguay, and Venezuela.
593554-001
6-cell, 55 WH (2.55 Ah) Li-ion battery
593562-001
6-cell, 62 WH (2.80 Ah) Li-ion battery
Sequential part number listing
23
Spare part
number
Description
600370-001
Broadcom 4313/2070 802.11b/g/n (1x1) and Bluetooth high-speed Half Mini Card for use in
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba,
Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize,
Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands,
Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, the Cayman
Islands, Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros,
Congo, Costa Rica, Croatia, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, the Dominican
Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji,
Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece,
Grenada, Guadeloupe, Guam, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong
Kong, Hungary, Iceland, India, Indonesia, Iraq, Ireland, Israel, Italy, Ivory Coast, Jamaica, Japan,
Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali,
Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands,
New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New
Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Puerto Rico, Qatar, the Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal,
Serbia and Montenegro, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands,
Somalia, South Africa, South Korea, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the
Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand,
Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the
United Arab Emirates, the United Kingdom, the United States, Uruguay, the US Virgin Islands,
Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
602993-001
Realtek RTL8188CE 802.11 b/g/n WiFi with Realtek CSRBC4 Bluetooth 2.1 + EDR Adapter
For use in Albania, Algeria, Andorra, Angola, Argentina, Azerbaijan, Austria, Bahrain, Belarus,
Belgium, Bolivia, Bosnia, Botswana, Brazil, Bulgaria, Cameroon, Canada (French/English), Chad,
Chile, Columbia, Costa Rica, Croatia, Cyprus, Czech Republic, Denmark, Ecuador, Egypt, El Salvador,
Estonia, Finland, France, Georgia, Germany, Ghana, Gibraltar, Greece, Guadeloupe, Guatemala,
Guyane Francaise, Honduras, Hungary, Iceland, Israel, Italy, Ivory Coast, Jordan, Kazakhstan, Kenya,
Kuwait, Latvia, Lebanon, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macedonia, Martinique,
Mayotte, Mauritius, Mexico, Moldova, Monaco, Montenegro, Morocco, Nambia, Netherlands,
Nicaragua, Nigeria, Norway, Nouvelle Caledoni, Oman, Panama, Paraguay, Peru, Poland, Polynesie
Francais, Portugal, Qatar, Reunion, Romania, Russia, San Marino, Sao Tome and principe, Saudi
Arabia, Senegal, Slovenia, South Africa, Spain, St. Pierre et Miquel, Swaziland, Sweden, Switzerland,
Tanzania, the United States, Tunisia, Turkey, UAE, Uganda, United Kingdom, Uruguay, Venezuela,
Wallis et Futuna, and Yemen..
24
608206-001
Display panel, 35.56 cm (14.0 in), high definition, Brightview
608210-001
Display hinge cover
608211-001
Display Cable Kit
608212-001
Display Screw Kit
608214-001
Display bracket (with hinges)
608215-001
Hard drive, 160 GB, solid state
677742-001
DVD±RW SuperMulti DL Drive (select models only)
608222-001
Keyboard for use in the United States
608222-031
Keyboard for use in the United Kingdom
608222-041
Keyboard for use in Germany
608222-051
Keyboard for use in France
608222-071
Keyboard for use in Spain
Chapter 3 Illustrated parts catalog
Spare part
number
Description
608222-121
Keyboard for use in English and French Canada
608222-131
Keyboard for use in Portugal
608222-141
Keyboard for use in Turkey
608222-161
Keyboard for use in Latin America
608222-171
Keyboard for use in Saudi Arabia
608222-201
Keyboard for use in Brazil
608222–251
Keyboard for use in Russia
608222-B31
Keyboard for use in Europe, the Middle East, and Africa
608222-BG1
Keyboard for use in Switzerland
608222-DH1
Keyboard for use in the Netherlands
608225-001
Fingerprint reader board
608227-001
Cable Kit (includes Bluetooth module cable and hard drive cable)
608228-001
Rubber Feet Kit
608232-001
Speaker assembly (includes cable)
608234-001
Screw Kit
608273-001
Power connector with cable
609939-001
65 W Smart AC adapter, RC/V 3W
609940-001
90 W Smart AC adapter, RC/V 3W
615744-001
Webcam module
621565-001
Memory module, 2 GB (PC3 10600 1333 Mhz)
621569-001
Memory module, 4 GB (PC3 10600 1333 Mhz)
630703-001
Ralink 5390GN 802.11 b/g/n 1x1 WiFi Adapter
For use in Albania, Algeria, Andorra, Angola, Argentina, Azerbaijan, Austria, Bahrain, Belarus,
Belgium, Bolivia, Bosnia, Botswana, Brazil, Bulgaria, Cameroon, Canada (French/English), Chad,
Chile, Columbia, Costa Rica, Croatia, Cyprus, Czech Republic, Denmark, Ecuador, Egypt, El Salvador,
Estonia, Finland, France, Georgia, Germany, Ghana, Gibraltar, Greece, Guadeloupe, Guatemala,
Guyane Francaise, Honduras, Hungary, Iceland, Israel, Italy, Ivory Coast, Jordan, Kazakhstan, Kenya,
Kuwait, Latvia, Lebanon, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macedonia, Martinique,
Mayotte, Mauritius, Mexico, Moldova, Monaco, Montenegro, Morocco, Nambia, Netherlands,
Nicaragua, Nigeria, Norway, Nouvelle Caledoni, Oman, Panama, Paraguay, Peru, Poland, Polynesie
Francais, Portugal, Qatar, Reunion, Romania, Russia, San Marino, Sao Tome and principe, Saudi
Arabia, Senegal, Slovenia, South Africa, Spain, St. Pierre et Miquel, Swaziland, Sweden, Switzerland,
Tanzania, the United States, Tunisia, Turkey, UAE, Uganda, United Kingdom, Uruguay, Venezuela,
Wallis et Futuna, and Yemen.
631252-001
Intel Core i7 2620M Dual-Core processor (2.7 GHz, SC turbo up to 3.40 GHz, 4 MB L3 cache, 35 W)
631253-001
Intel Core i5 2520M Dual-Core processor (2.5 GHz,, SC turbo up to 3.20 GHz, 3 MB, L3 cache 35 W)
631255-001
Intel Core i5 2540M Dual-Core processor (2.6 GHz,, SC turbo up to 3.33 GHz, 3 MB, L3 cache 35 W)
Sequential part number listing
25
Spare part
number
Description
631956-001
Intel Centrino advanced wireless-N 1030 + Bluetooth® combo 802.11b/g/ n 1x2 with WiDi support
For use in Albania, Algeria, Andorra, Angola, Argentina, Azerbaijan, Austria, Bahrain, Belarus,
Belgium, Bolivia, Bosnia, Botswana, Brazil, Bulgaria, Cameroon, Canada (French/English), Chad,
Chile, Columbia, Costa Rica, Croatia, Cyprus, Czech Republic, Denmark, Ecuador, Egypt, El Salvador,
Estonia, Finland, France, Georgia, Germany, Ghana, Gibraltar, Greece, Guadeloupe, Guatemala,
Guyane Francaise, Honduras, Hungary, Iceland, Israel, Italy, Ivory Coast, Jordan, Kazakhstan, Kenya,
Kuwait, Latvia, Lebanon, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macedonia, Martinique,
Mayotte, Mauritius, Mexico, Moldova, Monaco, Montenegro, Morocco, Nambia, Netherlands,
Nicaragua, Nigeria, Norway, Nouvelle Caledoni, Oman, Panama, Paraguay, Peru, Poland, Polynesie
Francais, Portugal, Qatar, Reunion, Romania, Russia, San Marino, Sao Tome and principe, Saudi
Arabia, Senegal, Slovenia, South Africa, Spain, St. Pierre et Miquel, Swaziland, Sweden, Switzerland,
Tanzania, the United States, Tunisia, Turkey, UAE, Uganda, United Kingdom, Uruguay, Venezuela,
Wallis et Futuna, and Yemen.
633817-001
Intel Centrino Advanced-N + WiMAX 6150 with WIDI support (+ Bluetooth)
For use in the United States.
634366-001
Thermal pad kit
636631-001
9-cell, 100 WH (3.0 Ah) Li-ion battery
636936-001
Display back cover for use in Dark Umber computer models
636937-001
Base enclosure
636938-001
Display bezel
636939-001
Fan/heat sink assembly for use in models with discrete graphics (includes replacement thermal
material)
636940-001
Fan/heat sink assembly for use in UMA models in which the processor is not soldered to the system
board (includes replacement thermal material)
636941-001
Display assembly, 35.56 cm (14.0 in), SVA, high-definition (HD), BrightView LED for use in Dark
Umber models
636942-001
Plastics Kit
636944-001
System board (includes replacement thermal material) for use in models equipped with 1 GB of
HD6470 discrete graphics memory
636945-001
System board for use in models equipped with HM65 UMA graphics memory
636946-001
Top cover for use in Dark Umber models (includes TouchPad and bracket, button board, and cable)
638039-001
Intel Core i5-2410M processor (2.3 GHz, turbo up to 2.9 GHz, 3 MB, L3 cache 35 W)
640926-001
Realtek RTL8191SE 802.11 b/g/n WiFi Adapter
For use in Albania, Algeria, Andorra, Angola, Argentina, Azerbaijan, Austria, Bahrain, Belarus,
Belgium, Bolivia, Bosnia, Botswana, Brazil, Bulgaria, Cameroon, Canada (French/English), Chad,
Chile, Columbia, Costa Rica, Croatia, Cyprus, Czech Republic, Denmark, Ecuador, Egypt, El Salvador,
Estonia, Finland, France, Georgia, Germany, Ghana, Gibraltar, Greece, Guadeloupe, Guatemala,
Guyane Francaise, Honduras, Hungary, Iceland, Israel, Italy, Ivory Coast, Jordan, Kazakhstan, Kenya,
Kuwait, Latvia, Lebanon, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macedonia, Martinique,
Mayotte, Mauritius, Mexico, Moldova, Monaco, Montenegro, Morocco, Nambia, Netherlands,
Nicaragua, Nigeria, Norway, Nouvelle Caledoni, Oman, Panama, Paraguay, Peru, Poland, Polynesie
Francais, Portugal, Qatar, Reunion, Romania, Russia, San Marino, Sao Tome and principe, Saudi
Arabia, Senegal, Slovenia, South Africa, Spain, St. Pierre et Miquel, Swaziland, Sweden, Switzerland,
Tanzania, the United States, Tunisia, Turkey, UAE, Uganda, United Kingdom, Uruguay, Venezuela,
Wallis et Futuna, and Yemen.
26
Chapter 3 Illustrated parts catalog
Spare part
number
Description
642731-001
Fan/heat sink for use in UMA models in which the processor is soldered to the system board (includes
replacement thermal material)
642732-001
System board for use in models equipped with HM65 UMA graphics memory; includes Intel Core
i3-2330M processor
650674-001
Display back cover for use in Steel Gray computer models
650675-001
Display assembly, 35.56 cm (14.0-in), SVA, high-definition (HD), BrightView, LED for use in Steel Gray
models
650676-001
Top cover for use in Steel Gray models (includes TouchPad and bracket, button board, and cable)
653341-001
Intel Core i5-2430M processor (2.4 GHz, turbo up to 2.9 GHz), 3 MB, L3 cache 35 W
655795-001
Atheros 9485GN 802.11b/g/n 1x1 WiFi and 3012 Bluetooth 4.0 Combo Adapter
656092-001
System board for use in models equipped with HM65 UMA graphics memory; includes Intel Core
i3-2310M processor
657325-001
Broadcom 4313GN 802.11b/g/n 1x1 WiFi and 20702 Bluetooth 4.0 Combo Adapter
658706-001
Power button board (includes cable)
658707-001
USB board with cable
660550-001
Optical drive weight saver
663563-001
QuickWeb keyboard for use in the United States
663563-031
QuickWeb keyboard for use in the United Kingdom
663563-041
QuickWeb keyboard for use in Germany
663563-051
QuickWeb keyboard for use in France
663563-061
QuickWeb keyboard for use in Italy
663563-071
QuickWeb keyboard for use in Spain
663563-121
QuickWeb keyboard for use in French Canada
663563-131
QuickWeb keyboard for use in Portugal
663563-141
QuickWeb keyboard for use in Turkey
663563-161
QuickWeb keyboard for use in Latin America
663563-171
QuickWeb keyboard for use in Saudi Arabia
663563-201
QuickWeb keyboard for use in Brazil
663563-251
QuickWeb keyboard for use in Russia
663563-A41
QuickWeb keyboard for use in Belgium
663563-B31
QuickWeb keyboard for use internationally
663563-BG1
QuickWeb keyboard for use in Switzerland
663563-DH1
QuickWeb keyboard for use in the Netherlands
672516-001
Hard drive mounting hardware
677742-001
DVD±RW SuperMulti DL Drive (select models only)
Sequential part number listing
27
28
Spare part
number
Description
678100-001
320 GB, 7200 rpm hard drive
678101-001
500 GB, 7200 rpm hard drive
678102-001
640 GB, 7200 rpm hard drive
678103-001
750 GB, 7200 rpm hard drive
Chapter 3 Illustrated parts catalog
4
Removal and replacement procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.
Preliminary replacement requirements
29
Cables and connectors
CAUTION: When servicing the computer, be sure that cables are placed in their proper locations
during the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to
unseat or seat the cables during removal and insertion. Handle cables by the connector whenever
possible. In all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in
such a way that they cannot be caught or snagged by parts being removed or replaced. Handle flex
cables with extreme care; these cables tear easily.
Drive handling
CAUTION: Drives are fragile components that must be handled with care. To prevent damage to
the computer, damage to a drive, or loss of information, observe these precautions:
Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the
computer is off or in Hibernation, turn the computer on, and then shut it down through the operating
system.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.
Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and
be sure that the optical drive tray is closed.
Handle drives on surfaces covered with at least one inch of shock-proof foam.
Avoid dropping drives from any height onto any surface.
After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.
Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.
Avoid exposing a drive to temperature extremes or liquids.
If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective
packaging and label the package “FRAGILE.”
30
Chapter 4 Removal and replacement procedures
Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure
determine the degree of sensitivity. Networks built into many integrated circuits provide some
protection, but in many cases, ESD contains enough power to alter device parameters or melt
silicon junctions.
A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.
An electronic device exposed to ESD may not be affected at all and can work perfectly throughout a
normal cycle. Or the device may function normally for a while, then degrade in the internal layers,
reducing its life expectancy.
CAUTION: To prevent damage to the computer when you are removing or installing internal
components, observe these precautions:
Keep components in their electrostatic-safe containers until you are ready to install them.
Use nonmagnetic tools.
Before touching an electronic component, discharge static electricity by using the guidelines
described in this section.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
If you remove a component, place it in an electrostatic-safe container.
The following table shows how humidity affects the electrostatic voltage levels generated by different
activities.
CAUTION: A product can be degraded by as little as 700 V.
Typical electrostatic voltage levels
Relative humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
Preliminary replacement requirements
31
Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
●
To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
●
Protect ESD-sensitive parts and assemblies with conductive or approved containers or
packaging.
●
Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
●
Place items on a grounded surface before removing items from their containers.
●
Always be properly grounded when touching a component or assembly.
●
Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive
foam.
●
Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that
mechanized equipment used for moving materials is wired to ground and that proper materials
are selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate
electric charges.
Workstation guidelines
Follow these grounding workstation guidelines:
32
●
Cover the workstation with approved static-shielding material.
●
Use a wrist strap connected to a properly grounded work surface and use properly grounded
tools and equipment.
●
Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
●
When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe
materials.
●
Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and
Styrofoam.
●
Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle
these items only at static-free workstations.
●
Avoid contact with pins, leads, or circuitry.
●
Turn off power and input signals before inserting or removing connectors or test equipment.
Chapter 4 Removal and replacement procedures
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
●
When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible
straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper
ground, wear a strap snugly against the skin at all times. On grounded mats with banana-plug
connectors, use alligator clips to connect a wrist strap.
●
When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps)
can be used at standing workstations and are compatible with most types of shoes or boots. On
conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one
megohm resistance between the operator and ground. To be effective, the conductive strips
must be worn in contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
●
Antistatic tape
●
Antistatic smocks, aprons, and sleeve protectors
●
Conductive bins and other assembly or soldering aids
●
Nonconductive foam
●
Conductive tabletop workstations with ground cords of one megohm resistance
●
Static-dissipative tables or floor mats with hard ties to the ground
●
Field service kits
●
Static awareness labels
●
Material-handling packages
●
Nonconductive plastic bags, tubes, or boxes
●
Metal tote boxes
●
Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
Material
Use
Voltage protection level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
Preliminary replacement requirements
33
Component replacement procedures
This chapter provides removal and replacement procedures.
There are as many as 75 screws, in 12 different sizes, that must be removed, replaced, or loosened
when servicing the computer. Make special note of each screw size and location during removal and
replacement.
Serial number
The serial number label, located in the battery bay of the computer, provides important information
that you may need when contacting technical support.
34
●
Product name (1). This is the product name affixed to the front of the computer.
●
Serial number (s/n) (2). This is an alphanumeric identifier that is unique to each product.
●
Part number/Product number (p/n) (3). This number provides specific information about the
product's hardware components. The part number helps a service technician to determine what
components and parts are needed.
●
Warranty period (4). This number describes the duration (in years) of the warranty period for the
computer.
●
Model description (5). This is the alphanumeric identifier used to locate documents, drivers, and
support for the computer.
Chapter 4 Removal and replacement procedures
Computer feet
Description
Spare part number
Rubber Feet Kit
608228-001
The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the
locations illustrated below.
Component replacement procedures
35
Battery
Description
Spare part number
9-cell, 100 WHr (3.0 Ah) Li-ion
636631-001
6-cell, 55 WHr (2.55 Ah) Li-ion
593554-001
6-cell, 62 WHr (2.80 Ah) Li-ion
593562-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the battery:
1.
Turn the computer upside down on a flat surface.
2.
Slide the battery release latch (1) to release the battery.
3.
Pivot the battery (2) upward and lift it out of the computer.
To insert the battery, insert the rear edge of the battery into the battery bay and pivot the front edge
downward until the battery is seated. The battery release latch automatically locks the battery into
place.
36
Chapter 4 Removal and replacement procedures
Memory module
Description
Spare part number
2 GB (PC3-10600 1333 MHz)
621565-001
4 GB (PC3-10600 1333 MHz)
621569-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
Remove the memory module:
1.
Turn the computer upside down with the front toward you.
2.
Loosen the two Phillips M2.5×5.0 captive screws (1) that secure the memory/wireless module
compartment cover to the computer.
3.
Lift the left side of the cover (2), swing it forward, and remove it (3). The memory/wireless
compartment cover is included in the plastics kit, spare part number 636942-001.
4.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
Component replacement procedures
37
5.
Remove the module (2) by pulling it away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the
memory module slot.
Reverse this procedure to install a memory module.
38
Chapter 4 Removal and replacement procedures
RTC battery
Description
Spare part number
RTC battery
449137-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
5.
Remove the memory/wireless module compartment cover (see Memory module on page 37)
Remove the RTC battery:
1.
Release the RTC battery from the clips on the system board (1).
2.
Remove the RTC battery (2).
Reverse this procedure to install the RTC battery.
Component replacement procedures
39
WLAN module
Description
Spare part
number
Intel Centrino wireless-N 1000 802.11b/g/n 1x2 with WiDi support
593530-001
For use in Argentina, Bolivia, Brazil, Canada (French/English), Chile, Columbia, Costa Rica, Ecuador,
El Salvador, Guadeloupe, Guatemala, Honduras, Mexico, Nicaragua, Panama, Paraguay, Peru, the
United States, Uruguay, and Venezuela.
Intel Centrino advanced wireless-N 1030 + Bluetooth combo 802.11b/g/ n 1x2 with WiDi support
631956-001
For use in Algeria, Argentina, Bahrain, Belarus, Belgium, Bolivia, Brazil, Bulgaria, Cameron, Canada
(French/English), Chad, Chile, Columbia, Costa Rica, Croatia, Cyprus, Ecuador, Egypt, El Salvador,
Estonia, France, Guadeloupe, Guatemala, Guyane Francaise, Honduras, Ivory Coast, Jordan, Kuwait,
Latvia, Lebanon, Martinique, Mayotte, Mexico, Montenegro, Morrocco, Nambia, Nicaragua, Nouvelle
Caledoni, Oman, Panama, Paraguay, Peru, Polynesie Francais, Portugal, Qatar, Reunion, Romania,
Russia, Sao Some & principe, Saudi Arabia, Senegal, South Africa, Spain, St. Pierre et Miquel,
Switzerland, the United States, Tunisia, Turkey, UAE, United Kingdom, Uruguay, Venezuela, Wallis et
Futuna, and Yemen.
Intel Centrino Advanced–N + WiMAX 6150, 802.11 b/g/nwith WiDi support (+ bluetooth)
633817-001
For use in the United States.
Realtek 8188GN 802.11b/g/n 1x1 WiFi adapter
640926-001
For use in For use in Algeria, Argentina, Bahrain, Belarus, Belgium, Bolivia, Brazil, Bulgaria, Cameron,
Canada (French/English), Chad, Chile, Columbia, Costa Rica, Croatia, Cyprus, Ecuador, Egypt, El
Salvador, Estonia, France, Guadeloupe, Guatemala, Guyane Francaise, Honduras, Ivory Coast,
Jordan, Kuwait, Latvia, Lebanon, Martinique, Mayotte, Mexico, Montenegro, Morrocco, Nambia,
Nicaragua, Nouvelle Caledoni, Oman, Panama, Paraguay, Peru, Polynesie Francais, Portugal, Qatar,
Reunion, Romania, Russia, Sao Some & principe, Saudi Arabia, Senegal, South Africa, Spain, St.
Pierre et Miquel, Switzerland, the United States, Tunisia, Turkey, UAE, United Kingdom, Uruguay,
Venezuela, Wallis et Futuna, Yemen.
Ralink 5390GN 802.11b/g/n 1x1 WiFi adapter
630703-001
For use in Algeria, Argentina, Bahrain, Belarus, Belgium, Bolivia, Brazil, Bulgaria, Cameron, Canada
(French/English), Chad, Chile, Columbia, Costa Rica, Croatia, Cyprus, Ecuador, Egypt, El Salvador,
Estonia, France, Guadeloupe, Guatemala, Guyane Francaise, Honduras, Ivory Coast, Jordan, Kuwait,
Latvia, Lebanon, Martinique, Mayotte, Mexico, Montenegro, Morrocco, Nambia, Nicaragua, Nouvelle
Caledoni, Oman, Panama, Paraguay, Peru, Polynesie Francais, Portugal, Qatar, Reunion, Romania,
Russia, Sao Some & principe, Saudi Arabia, Senegal, South Africa, Spain, St. Pierre et Miquel,
Switzerland, the United States, Tunisia, Turkey, UAE, United Kingdom, Uruguay, Venezuela, Wallis et
Futuna, Yemen.
Atheros AR9002WB-1NGB 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter (BT3.0+HS
ready)
For use in Algeria, Argentina, Bahrain, Belarus, Belgium, Bolivia, Brazil, Bulgaria, Cameron, Canada
(French/English), Chad, Chile, Columbia, Costa Rica, Croatia, Cyprus, Ecuador, Egypt, El Salvador,
Estonia, France, Guadeloupe, Guatemala, Guyane Francaise, Honduras, Ivory Coast, Jordan, Kuwait,
Latvia, Lebanon, Martinique, Mayotte, Mexico, Montenegro, Morrocco, Nambia, Nicaragua, Nouvelle
Caledoni, Oman, Panama, Paraguay, Peru, Polynesie Francais, Portugal, Qatar, Reunion, Romania,
Russia, Sao Some & principe, Saudi Arabia, Senegal, South Africa, Spain, St. Pierre et Miquel,
Switzerland, the United States, Tunisia, Turkey, UAE, United Kingdom, Uruguay, Venezuela, Wallis et
Futuna, Yemen.
40
Chapter 4 Removal and replacement procedures
593127-001
Description
Spare part
number
Realtek RTL8188CE 802.11b/g/n WiFi with Realtek CSRBC4 Bluetooth 2.1+EDR Adapter
602993-001
For use in Algeria, Argentina, Bahrain, Belarus, Belgium, Bolivia, Brazil, Bulgaria, Cameron, Canada
(French/English), Chad, Chile, Columbia, Costa Rica, Croatia, Cyprus, Ecuador, Egypt, El Salvador,
Estonia, France, Guadeloupe, Guatemala, Guyane Francaise, Honduras, Ivory Coast, Jordan, Kuwait,
Latvia, Lebanon, Martinique, Mayotte, Mexico, Montenegro, Morrocco, Nambia, Nicaragua, Nouvelle
Caledoni, Oman, Panama, Paraguay, Peru, Polynesie Francais, Portugal, Qatar, Reunion, Romania,
Russia, Sao Some & principe, Saudi Arabia, Senegal, South Africa, Spain, St. Pierre et Miquel,
Switzerland, the United States, Tunisia, Turkey, UAE, United Kingdom, Uruguay, Venezuela, Wallis et
Futuna, Yemen.
Broadcom 4313/2070 802.11b/g/n (1x1) and Bluetooth high-speed Half Mini Card for use in
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba,
Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize,
Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands,
Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, the Cayman
Islands, Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros,
Congo, Costa Rica, Croatia, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, the Dominican
Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji,
Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece,
Grenada, Guadeloupe, Guam, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong
Kong, Hungary, Iceland, India, Indonesia, Iraq, Ireland, Israel, Italy, Ivory Coast, Jamaica, Japan,
Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali,
Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New
Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea,
Paraguay, Peru, Philippines, Poland, Portugal, Puerto Rico, Qatar, the Republic of Moldova, Romania,
Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and
Montenegro, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia,
South Africa, South Korea, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines,
Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga,
Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab
Emirates, the United Kingdom, the United States, Uruguay, the US Virgin Islands, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
600370-001
Atheros 9485GN 802.11b/g/n 1x1 WiFi and 3012 Bluetooth 4.0 Combo Adapter
655795-001
Broadcom 4313GN 802.11b/g/n 1x1 WiFi and 20702 Bluetooth 4.0 Combo Adapter
657325-001
Before removing the WLAN module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
Remove the WLAN module:
1.
Turn the computer upside down with the front toward you.
2.
Disconnect the two WLAN antenna cables (1) from the WLAN module.
Component replacement procedures
41
3.
Remove the two Phillips M2.0×4.0 screws (2) that secure the WLAN module to the computer.
(The edge of the module opposite the slot rises away from the computer.)
4.
Remove the WLAN module (3) by pulling it away from the slot at an angle.
CAUTION: To prevent an unresponsive system, replace the wireless module only with a
wireless module authorized for use in the computer by the governmental agency that regulates
wireless devices in your country or region. If you replace the module and then receive a warning
message, remove the module to restore computer functionality, and then contact technical
support through Help and Support.
NOTE: WLAN modules are designed with a notch (4) to prevent incorrect insertion into the
WLAN module slot.
Reverse this procedure to install a WLAN module.
42
Chapter 4 Removal and replacement procedures
Hard drive
NOTE: All hard drive spare part kits include a hard drive bracket.
NOTE:
The hard drive cable is included in the Cable Kit, spare part number 608227-001.
Description
Spare part number
750 GB, 7200 rpm
678103-001
640 GB, 7200 rpm
678102-001
500 GB, 7200 rpm
678101-001
320 GB, 7200 rpm
678100-001
160 GB solid-state drive
608215-001
Hard drive mounting hardware
672516-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two captive Phillips M2.5×5.0 screws (1) that secure the hard drive cover to the
computer.
3.
Lift the cover up at an angle (2) and remove it (3). The hard drive cover is included in the plastics
kit, spare part number 636942-001.
4.
Disconnect the hard drive cable from the system board (1).
Component replacement procedures
43
5.
Lift the hard drive out of the hard drive bay (2).
6.
If it is necessary to replace the hard drive bracket (also called the protective cover), disconnect
the hard drive cable (1) from the hard drive.
7.
Remove the four Phillips M3.0×3.0 screws (2) and cover (3) only If the hard drive does not
already have these components preassembled.
Reverse this procedure to reassemble and install the hard drive.
44
Chapter 4 Removal and replacement procedures
Optical drive
Description
Spare part number
DVD±RW SuperMulti DL Drive (select models only)
677742-001
Optical drive weight saver
660550-00
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
5.
Remove the hard drive cover (see Hard drive on page 43).
Remove the optical drive:
1.
Position the computer upside down with the front toward you.
2.
Remove the Phillips M2.5x5.0 screw (1) that secures the optical drive to the computer.
3.
Use a flat-bladed screwdriver or similar tool to push the drive bracket (2) to release the optical
drive.
4.
Remove the optical drive (3).
5.
If it is necessary to remove the drive bezel, insert the end of a paper clip into the release access
hole (1) in the optical drive bezel. Press in gently until the tray is released.
Component replacement procedures
45
6.
Firmly pull outward on the open tray (2) until the drive slides out.
7.
Press the bezel release button (1), lift the bezel at an angle (2), and remove the bezel (3).
8.
If it is necessary to replace the optical drive bracket, position the optical drive with the optical
drive bracket toward you.
9.
Remove the two Phillips M2.0×3.0 screws (1) that secure the optical drive bracket to the optical
drive.
10. Remove the optical drive bracket (2).
Reverse the above procedure to reassemble and install the optical drive.
46
Chapter 4 Removal and replacement procedures
Keyboard
NOTE:
For a detailed list of available keyboards, see Sequential part number listing on page 23.
Description
Spare part number
Keyboard, standard
608222-xxx
Keyboard, QuickWeb
663563-xxx
Before removing the keyboard, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
5.
Remove the memory/wireless compartment cover (see Memory module on page 37).
6.
Remove the hard drive cover (see Hard drive on page 43).
Remove the keyboard:
1.
Turn the computer upside down with the front toward you.
2.
Remove the two Phillips M2.5×6.5 screws that secure the keyboard to the computer.
3.
Turn the computer right-side up with the front toward you.
4.
Open the display as far as possible.
5.
Release the top edge of the keyboard by lifting it up to disengage the keyboard from the tabs on
the top cover (1).
6.
Rotate the keyboard over until it rests on the palm rest (2).
Component replacement procedures
47
7.
Release the zero insertion force (ZIF) connector (3) to which the keyboard cable is attached and
disconnect the keyboard cable (4) from the system board.
8.
Remove the keyboard.
Reverse this procedure to install the keyboard.
48
Chapter 4 Removal and replacement procedures
Top cover
Description
Spare part number
Top cover, Dark Umber (includes TouchPad and bracket, button board, and cable)
636946-001
Top cover, Steel Gray (includes TouchPad and bracket, button board, and cable)
650676-001
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Battery (see Battery on page 36)
b.
Hard drive (see Hard drive on page 43)
c.
Optical drive (see Optical drive on page 45)
d.
Keyboard (see Keyboard on page 47)
Remove the top cover:
1.
Turn the computer upside down with the front toward you.
2.
Remove the two feet near the battery (1) and the 13 Phillips M2.5×7.0 screws (2) that secure the
top cover to the base enclosure. Two of the screws are under the feet.
Component replacement procedures
49
50
3.
Remove the six Phillips M2.0x2.0 broadhead screws that secure the top cover to the base
enclosure.
4.
Turn the computer right-side up with the front toward you.
5.
Open the display as far as possible.
6.
Release the ZIF connector (1) to which the TouchPad button board cable is connected and then
disconnect the cable from the system board (2).
7.
Release the ZIF connector (3) to which the fingerprint reader board cable is connected and
disconnect the cable from the system board (4).
Chapter 4 Removal and replacement procedures
8.
Remove the four Phillips M2.0 x 4.0 screws that secure the base enclosure and lift the
enclosure.
9.
Lift the top cover from the base enclosure to access the power button cable.
Component replacement procedures
51
10. Release the ZIF connector (1) to which the power button board cable is connected and
disconnect the cable from the system board (2).
Reverse this procedure to install the top cover.
52
Chapter 4 Removal and replacement procedures
Fingerprint reader board
Description
Spare part number
Fingerprint reader board
608225-001
Before removing the fingerprint reader board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 43)
b.
Optical drive (see Optical drive on page 45)
c.
Keyboard (see Keyboard on page 47)
d.
Top cover (see Top cover on page 49)
Remove the fingerprint reader board:
1.
Turn the top cover upside down, with the front toward you.
2.
Remove the Phillips M2.0×3.0 screw (1) that secures the fingerprint reader board and bracket to
the top cover.
3.
Release the ZIF connector (2) on the fingerprint reader board and disconnect the cable (3) from
the connector.
4.
Remove the fingerprint reader board bracket (4) from the top cover.
Component replacement procedures
53
5.
Remove the fingerprint reader board (5) from the top cover.
Reverse the above procedure to install the fingerprint reader board.
NOTE: To reinstall, place the board into the slot, and then place the bracket over it by setting the
right side of bracket into the slots. Then replace the screw.
54
Chapter 4 Removal and replacement procedures
Power button board
Description
Spare part number
Power button board (includes cable)
658706-001
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 43)
b.
Optical drive (see Optical drive on page 45)
c.
Keyboard (see Keyboard on page 47)
d.
Top cover (see Top cover on page 49)
Reverse this procedure to install the power button board.
Remove the power button board:
1.
Turn the top cover upside down with the rear edge toward you.
2.
Remove the two Phillips M2.0×3.0 screws (1) that secure the power button board to the top
cover.
Component replacement procedures
55
3.
Remove the power button board (2).
Reverse the above procedure to install the power button board.
Display assembly
Description
Spare Part Number
35.56 cm (14.0 in), SVA, high-definition (HD), BrightView LED display assembly for use in Dark
Umber models
636941-001
35.56 cm (14.0 in), SVA, high-definition (HD), BrightView LED display assembly for use in
Steel Gray models
650675-001
Before removing the display assembly, follow these steps:
56
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
5.
Disconnect the wireless antenna cables from the WLAN module (see WLAN module
on page 40).
6.
Remove the following components:
a.
WLAN module (see WLAN module on page 40)
b.
Keyboard (see Keyboard on page 47)
Chapter 4 Removal and replacement procedures
c.
Optical drive (see Optical drive on page 45)
d.
Top cover (see Top cover on page 49)
Remove the display assembly:
1.
Turn the computer display-side up, with the front toward you.
2.
Open the display as far as possible.
3.
Disconnect the display panel cable (1) from the system board.
4.
Remove the wireless antenna cables from the hole (2) built into the base enclosure.
CAUTION: Support the display assembly when removing the display screws in the following
steps. Failure to support the display assembly can result in damage to the assembly and other
components.
5.
Remove the four black Phillips M2.5×6.5 screws (3) that secure the display assembly to the
computer.
6.
Remove the display assembly (4).
Component replacement procedures
57
7.
If it is necessary to remove the display brackets, remove the two Phillips M2.0×3.0 screws (1)
that secure the brackets to the base enclosure, and the remove the brackets (2).
8.
If it is necessary to replace any of the display assembly internal components, remove the
following screw covers and screws. The display screw covers are included in the Display Screw
Kit, spare part number 608212-001.
(1) Two screw covers on the display bezel bottom edge
(2) Two Phillips M2.5×5.0 screws
9.
58
Flex the inside edge of the top (1), the left and right sides (2), and the bottom (3) of the display
bezel until the bezel disengages from the display back cover.
Chapter 4 Removal and replacement procedures
10. Remove the display bezel (4). The display bezel is available using spare part number
636938-001.
11. If it is necessary to replace the webcam module, lift the webcam from the double-sided tape on
the display back cover (1), disconnect the webcam cable (2) from the module, and remove the
webcam. The webcam is available using spare part number 615744-001.
12. If it is necessary to replace the display panel, remove the two Phillips M2.0x3.5 screws (1) and
the two Phillips M2.0x2.5 screws (2) that secure the display panel to the display enclosure.
Component replacement procedures
59
13. Remove the cable from the routing path (3) along the bottom of the enclosure, disconnect the
display panel cable from the HP logo light cable (4), and then lift the panel from the enclosure
(5). The display panel is available using the spare part numbers 636941-001 or 650675-001.
14. If it is necessary to replace the display cable, follow these steps:
a.
Position the display panel upside down.
b.
Disengage the webcam cable from the glue securing it to the back of the display (1).
c.
Peel back the tape that secures the display cable to the display (2).
d.
Unplug the display cable from the display (3).
e.
Remove the display cable from the display (4).
The display cable is available in the Display Cable Kit, spare part number 608211-001.
15. If it is necessary to replace the display bracket and hinges, remove the two Phillips M2.5×5.0
screws (1) that secure the brackets to the display.
60
Chapter 4 Removal and replacement procedures
16. Use a tool to gently pry the display hinge covers (2) from the display.
17. Remove the four Phillips M2.5x3.0 screws (1) that secure the display brackets to the display.
Remove the display brackets (2) from the display. The display bracket and hinge set are
available using spare part number 608214-001.
NOTE: Note the WLAN antenna routing path through the right hinge for replacement.
The silver screws go on the outside of the hinges.
18. If it is necessary to replace the wireless antennas and cables, remove the adhesive strip (1) that
secures each antenna to the display back cover.
19. Remove the antennas from the clips (2) built into the top of the display enclosure.
Component replacement procedures
61
20. Remove the wireless antennas and cables (3) from the display enclosure. The wireless
antennas and cables are included in the Display Cable Kit, spare part number 608211-001.
Reverse this procedure to reassemble and install the display assembly.
62
Chapter 4 Removal and replacement procedures
USB board
Description
Spare part number
USB board (includes cable)
658707-001
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 43)
b.
Optical drive (see Optical drive on page 45)
c.
Keyboard (see Keyboard on page 47)
d.
Top cover (see Top cover on page 49)
Remove the USB board:
1.
Position the computer upright with the right side toward you.
2.
Disconnect the USB board cable (1) from the system board.
3.
Remove the Phillips M2.5×5.0 screw (2) that secures the USB board to the base enclosure.
4.
Lift the USB board straight up (3) to remove it from the computer.
Component replacement procedures
63
Reverse this procedure to install the USB board.
NOTE:
When reinstalling note that the screw goes into the upper hole.
Power connector cable
Description
Spare part number
Power connector cable (includes cable and connector)
608273-001
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 43)
b.
Optical drive (select models only) (see Optical drive on page 45)
c.
Keyboard (see Keyboard on page 47)
d.
Top cover (see Top cover on page 49)
e.
USB board (see USB board on page 63)
Remove the power connector cable:
64
1.
Turn the computer upright with the right side toward you.
2.
Disconnect the power connector cable (1) from the system board.
3.
Remove the two Phillips M2.5×5.0 screws (2) that secure the power connector cable to the base
enclosure.
4.
Lift the bracket from the connector (3).
Chapter 4 Removal and replacement procedures
5.
Remove the power connector (4) from the base enclosure.
Reverse this procedure to install the power connector cable.
Component replacement procedures
65
Bluetooth module
NOTE:
The Bluetooth module cable is included in the Cable Kit, spare part number 608227-001.
Description
Spare part number
Bluetooth module
537921-001
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 43)
b.
Optical drive (see Optical drive on page 45)
c.
Keyboard (see Keyboard on page 47)
d.
Top cover (see Top cover on page 49)
Remove the Bluetooth module:
66
1.
Position the computer upright with the front toward you.
2.
Lift the tape near the system board connector (1) that secures the Bluetooth module cable to the
system board.
3.
Disconnect the cable from the system board (2).
Chapter 4 Removal and replacement procedures
4.
Remove the Bluetooth module and cable from the slot in the base enclosure (3), while noting the
cable routing path atop the speaker (4).
Reverse the above procedure to install the Bluetooth module.
Component replacement procedures
67
Speaker assembly
Description
Spare part number
Speaker assembly
608232-001
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
5.
Remove the following components:
a.
Optical drive (see Optical drive on page 45)
b.
Keyboard (see Keyboard on page 47)
c.
Top cover (see Top cover on page 49)
d.
Bluetooth module (see Bluetooth module on page 66).
Remove the speaker assembly:
68
1.
Position the computer upright with the front toward you.
2.
Disconnect the speaker cable from the system board (1).
3.
Remove the Phillips M2.0×4.0 screw (2) that secures the speaker assembly to the base
enclosure.
Chapter 4 Removal and replacement procedures
4.
Lift the speaker assembly straight up (3) to remove it from the base enclosure.
Reverse this procedure to install the speaker assembly.
Component replacement procedures
69
System board
NOTE:
All system board kits include replacement thermal material.
NOTE: System boards with the processor already installed, as well as without the processor, are
available for this computer.
Description
Spare part number
System board (includes replacement thermal material) for use in models equipped with 1 GB of
HD6470 discrete graphics memory
636944-001
System board with HM65 UMA graphics memory
636945-001
System board with HM65 UMA graphics memory; includes Intel i3 2330M processor
642732-001
System board with HM65 UMA graphics memory; includes Intel i3 2310M processor
656092-001
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
RTC battery (see RTC battery on page 39)
●
Memory modules (see Memory module on page 37)
●
WLAN module (see WLAN module on page 40)
●
Fan/heat sink assembly (see Fan/heat sink assembly on page 72)
●
Processor (see Processor on page 77)
NOTE: Only for system boards that do not come with the processor installed.
Before removing the system board, follow these steps:
70
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 43)
b.
WLAN module (see WLAN module on page 40)
c.
Optical drive (see Optical drive on page 45)
d.
Keyboard (see Keyboard on page 47)
e.
Top cover (see Top cover on page 49)
f.
Speaker assembly (see Speaker assembly on page 68)
Chapter 4 Removal and replacement procedures
g.
Display assembly (see Display assembly on page 56)
h.
USB board (see USB board on page 63)
i.
Power connector cable (see Power connector cable on page 64)
j.
Bluetooth module (see Bluetooth module on page 66)
1.
Turn the computer upright with the left side toward you.
2.
Disconnect the optical drive connector cable (1) from the system board.
3.
Remove the three Phillips M2.5×5.0 screws (2) that secure the system board to the computer.
4.
Loosen the captive screw in the fan sink that secures the system board (3).
5.
Lift the right side of the system board (4).
6.
Release the system board by sliding it to the right at an angle (5) until the connectors on the left
side of the system board clear the base enclosure, and then remove the system board.
Reverse the preceding procedure to install the system board.
Component replacement procedures
71
Fan/heat sink assembly
NOTE:
All fan/heat sink assembly kits include replacement thermal material.
Description
Spare part number
Fan/heat sink assembly for use in UMA models in which the processor is not soldered to the
system board
636940-001
Fan/heat sink assembly for use in UMA models in which the processor is soldered to the system
board
642731-001
Fan/heat sink assembly for use in models with discrete graphics
636939-001
NOTE: To properly ventilate the computer, allow at least a 7.6 cm (3 inch) clearance on the right
side and rear panel of the computer. The computer uses an electric fan for ventilation. The fan is
controlled by a temperature sensor and is designed to turn on automatically when high temperature
conditions exist. These conditions are affected by high external temperatures, system power
consumption, power management/battery conservation configurations, battery fast charging, and
software requirements. Exhaust air is displaced through the ventilation grill located on the left side of
the computer.
Before removing the fan/heat sink assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 43)
b.
WLAN module (see WLAN module on page 40)
c.
Optical drive (see Optical drive on page 45)
d.
Keyboard (see Keyboard on page 47)
e.
Top cover (see Top cover on page 49)
f.
Speaker assembly (see Speaker assembly on page 68)
g.
Power connector cable (see Power connector cable on page 64)
h.
USB board (see USB board on page 63).
i.
Display assembly (see Display assembly on page 56)
j.
Bluetooth module removal (see Bluetooth module on page 66)
k.
System board (see System board on page 70)
Remove the fan/heat assembly (fan/heat sink appearance may vary):
72
Chapter 4 Removal and replacement procedures
NOTE: Steps 1 through 4 apply to computers with discrete subsystem memory on the system
board. Steps 5 through 7 apply to computers with UMA subsystem memory.
1.
Turn the system board upside down.
2.
Disconnect the fan cable from the system board.
3.
Follow the sequence embossed on heat sink to loosen the six Phillips M2.5×7.0 captive screws
(1) that secure the fan/heat sink assembly to the system board.
NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink
assembly and system board components, it may be necessary to move the fan/heat sink
assembly from side to side to detach the assembly.
Component replacement procedures
73
4.
Remove the fan/heat sink assembly (2).
The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink
assembly (1), the processor (2) and the graphics processor (3) on the system board each time
the fan/heat sink assembly is removed. Thermal pads and thermal paste must be installed on all
surfaces before the fan/heat sink assembly is reinstalled.
The following illustration shows the locations for thermal material on systems with discrete
graphics subsystems.
NOTE: Steps 5 through 7 apply to computers with UMA subsystem memory on the system
board. Steps 1 through 4 apply to computers with discrete subsystem memory.
74
Chapter 4 Removal and replacement procedures
5.
Disconnect the fan cable from the system board.
6.
Follow the sequence embossed on heat sink to loosen the four Phillips M2.5×7.0 captive screws
(1) that secure the fan/heat sink assembly to the system board.
NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink
assembly and system board components, it may be necessary to move the fan/heat sink
assembly from side to side to detach the assembly.
Component replacement procedures
75
7.
Remove the fan/heat sink assembly (2).
The thermal material must be thoroughly cleaned from the surface of the processor component (1)
and the fan/heat sink assembly (2) each time the fan/heat sink assembly is removed. Thermal pads
and thermal paste must be installed on all surfaces before the fan/heat sink assembly is reinstalled.
NOTE: Thermal pads and thermal paste are included with all fan/heat sink assembly, system board,
and processor spare part kits.
The following illustration shows the locations for thermal material on systems with UMA graphics
subsystems.
Reverse this procedure to install the fan/heat sink assembly.
76
Chapter 4 Removal and replacement procedures
Processor
NOTE:
All processor spare part kits include thermal material.
Description
Spare part number
Intel Core i7 2620M processor, 2.7 GHz (SC turbo up to 3.40 GHz), 4 MB L3 cache 35 W
631252-001
Intel Core i5 2520M processor, 2.5 GHz, (SC turbo up to 3.2 GHz), 3 MB L3 cache 35 W
631253-001
Intel Core i5 2540M processor, 2.6 GHz, (SC turbo up to 3.33 GHz), 3 MB L3 cache 35 W
631255-001
Intel Core i5 2430M Dual-Core processor, 2.4 GHz, (SC turbo up to 3.0 GHz), 3 MB L3 cache 35 W
653341-001
Intel Core i5 2460M processor, 2.53 GHz, 3 MB L3 cache)
626309-001
Before removing the processor, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 36).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 43)
b.
WLAN module (see WLAN module on page 40)
c.
Optical drive (see Optical drive on page 45)
d.
Keyboard (see Keyboard on page 47)
e.
Top cover (see Top cover on page 49)
f.
Speaker assembly (see Speaker assembly on page 68)
g.
Power connector cable (see Power connector cable on page 64)
h.
USB board (see USB board on page 63)
i.
Display assembly (see Display assembly on page 56)
j.
Bluetooth module (see Bluetooth module on page 66)
k.
System board (see System board on page 70)
l.
Fan/heat sink assembly (see Fan/heat sink assembly on page 72)
Remove the processor:
1.
Turn the processor locking screw (1) one-half turn counterclockwise until you hear a click.
Component replacement procedures
77
2.
Lift the processor (2) straight up and remove it.
NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4)
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
78
Chapter 4 Removal and replacement procedures
5
Setup Utility
Starting Setup Utility
Setup Utility is a ROM-based information and customization utility that can be used even when your
Windows operating system is not working.
NOTE:
The fingerprint reader cannot be used to access Setup Utility.
The utility reports information about the computer and provides settings for startup, security, and
other preferences.
To start Setup Utility:
▲
Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
1.
Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press esc.
2.
When the Startup Menu is displayed, press f10.
Using Setup Utility
Changing the language of Setup Utility
The following procedure explains how to change the language of Setup Utility. If Setup Utility is not
already running, begin at step 1. If Setup Utility is already running, begin at step 2.
1.
Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the
Startup Menu is displayed, press f10.
2.
Use the arrow keys to select System Configuration > Language, and then press enter.
3.
Use the arrow keys to select a language, and then press enter.
Starting Setup Utility
79
4.
When a confirmation prompt with your language selected is displayed, press enter.
5.
To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press enter.
Your change goes into effect immediately.
Navigating and selecting in Setup Utility
Because Setup Utility is not Windows based, it does not support the TouchPad. Navigation and
selection are by keystroke.
●
To choose a menu or a menu item, use the arrow keys.
●
To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the
arrow keys or f5 or f6.
●
To select an item, press enter.
●
To close a text box or return to the menu display, press esc.
●
To display additional navigation and selection information while Setup Utility is open, press f1.
Displaying system information
The following procedure explains how to display system information in Setup Utility. If Setup Utility is
not open, begin at step 1. If Setup Utility is open, begin at step 2.
1.
Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the
Startup Menu is displayed, press f10.
2.
Select the Main menu. System information such as the system time and date, and identification
information about the computer is displayed.
3.
To exit Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press enter.
Restoring default settings in Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If Setup Utility is not
already running, begin at step 1. If Setup Utility is already running, begin at step 2.
1.
Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the
Startup Menu is displayed, press f10.
2.
80
Use the arrow keys to select Exit > Load Setup Defaults, and then press enter.
Chapter 5 Setup Utility
3.
When the Setup Confirmation is displayed, press enter.
4.
To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press enter.
The Setup Utility default settings go into effect when the computer restarts.
NOTE: Your password, security, and language settings are not changed when you restore the
factory default settings.
Exiting Setup Utility
You can exit Setup Utility with or without saving changes.
●
To exit Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then, use the
arrow keys to select Exit > Exit Saving Changes, and then press enter.
●
To exit Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then, use the
arrow keys to select Exit > Exit Discarding Changes, and then press enter.
After either choice, the computer restarts in Windows.
Using Setup Utility
81
Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
NOTE: Some of the Setup Utility menu items listed in this chapter may not be supported by your
computer.
Main menu
Select
To do this
System information
●
View and change the system time and date.
●
View identification information about the computer.
●
View specification information about the processor, memory size,
system BIOS, and keyboard controller version (select models
only).
Security menu
Select
To do this
Administrator password
Enter, change, or delete an administrator password.
Power-On Password
Enter, change, or delete a power-on password.
System Configuration menu
82
Select
To do this
Language Support
Change the Setup Utility language.
Virtualization Technology (select models only)
Enable/disable the processor Virtualization Technology.
Fan Always On
Enable/disable Fan Always On. When enabled, the computer fan will
always be on.
Chapter 5 Setup Utility
Select
To do this
Action Keys Mode
Enable/disable action keys.
Boot Options
Set the following boot options:
●
f10 and f12 Delay (seconds)―Set the delay for the f10 and f12
functions of Setup Utility in intervals of 5 seconds each (0, 5, 10,
15, 20).
●
CD-ROM boot―Enable/disable boot from CD-ROM.
●
Floppy boot―Enable/disable boot from diskette.
●
Internal Network Adapter boot―Enable/disable boot from Internal
Network Adapter.
●
Boot Order―Set the boot order for:
◦
Hard drive
◦
Internal CD/DVD ROM drive
◦
USB Diskette on Key/USB hard disk
◦
USB CD/DVD ROM drive
◦
USB floppy
◦
Network adapter
Diagnostics menu
Select
To do this
Hard Disk Self Test
Run a comprehensive self test on the hard drive.
NOTE: On models with two hard drives, this menu option is called
Primary Hard Disk Self Test.
Secondary Hard Disk Self Test (select models
only)
Run a comprehensive self test on a secondary hard drive.
Memory Test
Run a diagnostic test on the system memory.
Setup Utility menus
83
6
Specifications
Computer specifications
Dimensions
Factor
Metric
U.S.
Depth
22.8 cm
8.98 in
Width
34.8 cm
13.7 in
Height (front to rear)
2.5 to 3.2 cm
0.98 to 1.26 in
Weight (lowest weight configuration)
< 2.00 kg
4.42 lbs
Input power
Operating voltage
18.5 V dc @ 4.74 A – 90 W
Operating current
4.74 A
Temperature
Factor
Metric
U.S.
Operating
5°C to 35°C
41°F to 95°F
Nonoperating
-20°C to 60°C
–4°F to 140°F
Operating
10% to 90%
10% to 90%
Nonoperating
5% to 95%
5% to 95%
Operating
-15 m to 3,048 m
-50 ft to 10,000 ft
Nonoperating
-15 m to 12,192 m
-50 ft to 40,000 ft
Relative humidity (noncondensing)
Maximum altitude (unpressurized)
NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within
this range of temperatures.
84
Chapter 6 Specifications
35.56 cm (14.0 in) display specifications
Dimensions
Active diagonal size
35.56 cm (14.00 in)
Active area
309.399 x 173.952
Resolution
1366 × 768 (HD)
Weight
320 g (0.71 lbs)
Contrast ratio
500:1 (typical)
Luminance
200 nits (typical)
Luminance uniformity
1.4 (typical)
1.6 (max)
Lifetime (1/2 luminance)
12,000 hours
Backlight
LED
Response time
8 ms (typical)
Surface treatment
BV
Total power consumption
2.8 W
Viewing angle
SVA
35.56 cm (14.0 in) display specifications
85
Hard drive specifications
750 GB*
640 GB*
500 GB*
320 GB*
Dimensions
Height
9.5 mm
Width
70 mm
Weight
101 g
Interface type
SATA
Transfer rate
100 MB/sec
Security
ATA security
Seek times (typical read, including setting)
Single track
1.0 ms
1.0 ms
1.0 ms
1.5 ms
Average
14.0 ms
14.0 ms
14.0 ms
12.0 ms
Maximum
22.0 ms
22.0 ms
22.0 ms
22.0 ms
Logical blocks
1,465,149,168
1,250,263,728
976,773,168
625,142,448
Disc rotational speed
7200 rpm
7200 rpm
7200 rpm
7200 rpm
Operating temperature
5°C to 35°C (41°F to 95°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive
specifications may differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact technical support for details.
86
Chapter 6 Specifications
DVD±RW SuperMulti Double-Layer Drive specifications
Applicable disc
Read
CD-DA, CD+(E)G, CD MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED
MODE CD, CD-I, CD-I Bridge (Photo-CD, Video CD), Multisession CD
(Photo-CD, CD-EXTRA, Portfolio, CD-R, CD-RW), CD-R, CD-RW, DVDROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD-R, DVD-RW, DVD+R, DVD
+RW, DVD-RAM
Write
CD-R and CD-RW, DVD+R, DVD+RW, DVD-R, DVD-RW, DVD-RAM
Random access time
DVD
< 230 ms
CD
< 175 ms
Cache buffer
2 MB
Data transfer rate
24X CD-ROM
3,600 KB/sec
8X DVD-ROM
10,800 KB/sec
24X CD-R
3,600 KB/sec
16X CD-RW
2,400 KB/sec
8X DVD+R
10,800 KB/sec
4X DVD+RW
5,400 KB/sec
8X DVD-R
10,800 KB/sec
4X DVD-RW
5,400 KB/sec
2.4X DVD+R(9)
2,700 KB/sec
5X DVD-RAM
6,750 KB/sec
Transfer mode
Multiword DMA Mode
DVD±RW SuperMulti Double-Layer Drive specifications
87
System resource specifications
You can use Device Manager to get a graphical view of the system resources that control how the
devices work on the computer. System resources you can access from Device Manager are direct
memory access (DMA) channels, input/output (I/O) ports, interrupt request (IRQ) lines, and memory
addresses.
If two devices require the same resource and create a device conflict, you can manually change the
resource settings in Device Manager to be sure each setting is unique.
CAUTION: Improperly changing resource settings can disable your hardware and cause your
computer to malfunction or become inoperable. Only users who have expert knowledge of computer
hardware and hardware configurations should change resource settings.
To view resource settings in Windows 7:
88
1.
Select Start > Computer.
2.
Click System properties near the top of the Computer folder.
3.
On the left, click Device Manager.
4.
On the View menu, click one of the following:
●
Resources by type
●
Resources by connection
Chapter 6 Specifications
7
Backup and recovery
●
Restore
●
Creating restore media
●
Performing a system restore
●
Backing up and recovering your information
Your computer includes tools provided by the operating system and HP to help you safeguard your
information and restore it if ever needed.
This chapter provides information on the following topics:
●
Creating a set of recovery discs or a recovery flash drive (HP Recovery Manager software
feature)
●
Performing a system restore (from the partition, recovery discs, or a recovery flash drive)
●
Backing up your information
●
Recovering a program or driver
89
Restore
In the event of hard drive failure, to restore your system to its factory image you will need a set of
recovery discs or a recovery flash drive that you can create using HP Recovery Manager. HP
recommends that you use this software to create either a set of recovery discs or a recovery flash
drive immediately after software setup.
If for some other reason you need to restore your system, this can be achieved using the HP
Recovery partition (select models only), without the need for recovery discs or a recovery flash drive.
To check for the presence of a recovery partition, click Start, right-click Computer, click Manage,
and then click Disk Management. If the recovery partition is present, a Recovery drive is listed in the
window.
CAUTION: HP Recovery Manager (partition or discs/flash drive) restores only software that was
preinstalled at the factory. Software not provided with this computer must be reinstalled manually.
NOTE:
Recovery discs have been included if your computer does not have a recovery partition.
Creating restore media
HP recommends that you create either a set of recovery discs or a recovery flash drive to be sure that
you can restore your computer to its original factory state if the hard drive fails, or if for any reason
you cannot restore using the recovery partition tools. Create these discs or the flash drive after setting
up the computer for the first time.
NOTE: HP Recovery Manager allows the creation of only one set of recovery discs or one recovery
flash drive. Handle these discs or the flash drive carefully and keep them in a safe place.
NOTE: If your computer does not include an integrated optical drive, you can use an optional
external optical drive (purchased separately) to create recovery discs, or you can purchase recovery
discs for your computer from the HP Web site. If you use an external optical drive, it must be
connected directly to a USB port on the computer, not to a USB port on an external device, such as a
USB hub.
Guidelines:
●
Purchase high-quality DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs.
NOTE: Read-write discs, such as CD-RW, DVD±RW, double-layer DVD±RW, and BD-RE
(rewritable Blu-ray) discs, are not compatible with the HP Recovery Manager software.
●
The computer must be connected to AC power during this process.
●
Only one set of recovery discs or one recovery flash drive can be created per computer.
NOTE: If you are creating recovery discs, number each disc before inserting it into the optical
drive.
●
If necessary, you can exit the program before you have finished creating the recovery discs or
recovery flash drive. The next time you open HP Recovery Manager, you will be prompted to
continue the backup creation process.
To create a set of recovery discs or a recovery flash drive:
90
1.
Select Start > All Programs > HP > HP Recovery Manager > HP Recovery Media Creation.
2.
Follow the on-screen instructions.
Chapter 7 Backup and recovery
Performing a system restore
HP Recovery Manager software allows you to repair or restore the computer to its original factory
state. HP Recovery Manager works from recovery discs or a recovery flash drive, or from a dedicated
recovery partition (select models only) on the hard drive.
NOTE: A system restore needs to be performed if the computer hard drive has failed or if all
attempts to correct any functional computer issues fail. A system restore should be used as a final
attempt to correct computer issues.
Note the following when performing a system restore:
●
You can restore only the system that you have previously backed up. HP recommends that you
use Recovery Manager to create either a set of recovery discs or a recovery flash drive as soon
as you set up the computer.
●
Windows has its own built-in repair features, such as System Restore. If you have not already
tried these features, try them before using HP Recovery Manager.
●
HP Recovery Manager restores only software that was preinstalled at the factory. Software not
provided with this computer must be downloaded from the manufacturer's Web site or reinstalled
from the disc provided by the manufacturer.
Restoring using the dedicated recovery partition (select models only)
When using the dedicated recovery partition, there is an option to back up pictures, music and other
audio, videos and movies, recorded TV shows, documents, spreadsheets and presentations, e-mails,
and Internet favorites and settings during this process.
To restore the computer from the recovery partition, follow these steps:
1.
Access HP Recovery Manager in either of the following ways:
●
Select Start > All Programs > HP > HP Recovery Manager > HP Recovery Manager.
– or –
●
Turn on or restart the computer, and then press esc while the “Press the ESC key for
Startup Menu” message is displayed at the bottom of the screen. Then, press f11 while the
“F11 (System Recovery)” message is displayed on the screen.
2.
Click System Recovery in the HP Recovery Manager window.
3.
Follow the on-screen instructions.
Performing a system restore
91
Restoring using the restore media
1.
If possible, back up all personal files.
2.
Insert the first recovery disc into the optical drive on your computer or an optional external
optical drive, and then restart the computer.
– or –
Insert the recovery flash drive into a USB port on your computer, and then restart the computer.
NOTE: If the computer does not automatically restart in HP Recovery Manager, the computer
boot order needs to be changed.
3.
Press f9 at system bootup.
4.
Select the optical drive or the flash drive.
5.
Follow the on-screen instructions.
Changing the computer boot order
To change the boot order for recovery discs:
1.
Restart the computer.
2.
Press esc while the computer is restarting, and then press f9 for boot options.
3.
Select Internal CD/DVD ROM Drive from the boot options window.
To change the boot order for a recovery flash drive:
92
1.
Insert the flash drive into a USB port.
2.
Restart the computer.
3.
Press esc while the computer is restarting, and then press f9 for boot options.
4.
Select the flash drive from the boot options window.
Chapter 7 Backup and recovery
Backing up and recovering your information
It is very important to back up your files and keep any new software in a safe place. As you add new
software and data files, continue to create backups on a regular basis.
How completely you are able to recover your system depends on how recent your backup is.
NOTE: A recovery from your most recent backup needs to be performed if the computer has a virus
attack or if any major system components fail. In order to correct computer issues, a recovery should
first be attempted before a system restore is attempted.
You can back up your information to an optional external hard drive, a network drive, or discs. Back
up your system at the following times:
●
At regularly scheduled times
TIP: Set reminders to back up your information periodically.
●
Before the computer is repaired or restored
●
Before you add or modify hardware or software
Guidelines:
●
Create system restore points using the Windows® System Restore feature, and periodically
copy them to an optical disc or an external hard drive. For more information on using system
restore points, refer to Using Windows system restore points on page 95.
●
Store personal files in the Documents library and back up this folder periodically.
●
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your
settings. The screen shot can be a time-saver if you have to re-enter your preferences.
To create a screen shot:
1.
Display the screen you want to save.
2.
Copy the screen image:
To copy only the active window, press alt+prt sc.
To copy the entire screen, press prt sc.
3.
Open a word-processing document, and then select Edit > Paste. The screen image is added to
the document.
4.
Save and print the document.
Backing up and recovering your information
93
Using Windows Backup and Restore
Guidelines:
●
Be sure that the computer is connected to AC power before you start the backup process.
●
Allow enough time to complete the backup process. Depending on file sizes, it may take over an
hour.
To create a backup:
1.
Select Start > Control Panel > System and Security > Backup and Restore.
2.
Follow the on-screen instructions to schedule and create a backup.
NOTE: Windows® includes the User Account Control feature to improve the security of the
computer. You may be prompted for your permission or password for tasks such as installing
software, running utilities, or changing Windows settings. Refer to Help and Support for more
information.
94
Chapter 7 Backup and recovery
Using Windows system restore points
A system restore point allows you to save and name a snapshot of your hard drive at a specific point
in time. You can then recover back to that point if you want to reverse subsequent changes.
NOTE: Recovering to an earlier restore point does not affect data files saved or e-mails created
since the last restore point.
You also can create additional restore points to provide increased protection for your files and
settings.
When to create restore points
●
Before you add or modify software or hardware
●
Periodically, whenever the computer is functioning optimally
NOTE:
If you revert to a restore point and then change your mind, you can reverse the restoration.
Create a system restore point
1.
Select Start > Control Panel > System and Security > System.
2.
In the left pane, click System Protection.
3.
Click the System Protection tab.
4.
Follow the on-screen instructions.
Restore to a previous date and time
To revert to a restore point (created at a previous date and time), when the computer was functioning
optimally, follow these steps:
1.
Select Start > Control Panel > System and Security > System.
2.
In the left pane, click System Protection.
3.
Click the System Protection tab.
4.
Click System Restore.
5.
Follow the on-screen instructions.
Backing up and recovering your information
95
8
Recycling
Battery
When a battery has reached the end of its useful life, do not dispose of the battery in general
household waste. Follow the local laws and regulations in your area for computer battery disposal.
Display
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and causing exposure to the mercury.
CAUTION: The procedures in this chapter can result in damage to display components. The only
components intended for recycling purposes are the liquid crystal display (LCD) panel and the
backlight. When you remove these components, handle them carefully.
NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display
assembly that might require special handling at end-of-life. Disposal of mercury may be regulated
because of environmental considerations. For disposal or recycling information, contact your local
authorities, or see the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org.
This section provides disassembly instructions for the display assembly. The display assembly must
be disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2).
NOTE: The procedures provided in this chapter are general disassembly instructions. Specific
details, such as screw sizes, quantities, and locations, and component shapes and sizes, can vary
from one computer model to another.
96
Chapter 8 Recycling
Perform the following steps to disassemble the display assembly:
1.
Remove all screw covers (1) and screws (2) that secure the display bezel to the display
assembly.
2.
Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of
the display bezel until the bezel disengages from the display assembly.
3.
Remove the display bezel (3).
Display
97
98
4.
Disconnect all display panel cables (1) from the display inverter and remove the inverter (2).
5.
Remove all screws (1) that secure the display panel assembly to the display enclosure.
6.
Remove the display panel assembly (2) from the display enclosure.
7.
Turn the display panel assembly upside-down.
8.
Remove all screws that secure the display panel frame to the display panel.
9.
Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to the
display panel frame.
Chapter 8 Recycling
10. Remove the display panel frame (2) from the display panel.
11. Remove the screws (1) that secure the backlight cover to the display panel.
12. Lift the top edge of the backlight cover (2) and swing it outward.
13. Remove the backlight cover.
14. Turn the display panel right-side up.
Display
99
15. Remove the backlight cables (1) from the clip (2) in the display panel.
16. Turn the display panel upside-down.
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and causing exposure to the mercury.
17. Remove the backlight frame from the display panel.
100 Chapter 8 Recycling
18. Remove the backlight from the backlight frame.
19. Disconnect the display panel cable (1) from the LCD panel.
20. Remove the screws (2) that secure the LCD panel to the display rear panel.
21. Release the LCD panel (3) from the display rear panel.
22. Release the tape (4) that secures the LCD panel to the display rear panel.
23. Remove the LCD panel.
24. Recycle the LCD panel and backlight.
Display 101
Index
A
AC adapter
spare part numbers 22
action keys
identifying 8
action keys mode 83
administrator password 82
audio in (microphone) jack,
identifying 10
audio, product description 2
audio-out (headphone) jack,
identifying 10
B
backing up
customized window, toolbar,
and menu bar settings 93
personal files 93
base enclosure, spare part
number 18
battery
removal 36
spare part numbers 18, 26, 36
battery bay 12
battery light 9
battery release latch 12
bezel
illustrated 19
spare part number 19, 59
Bluetooth cable, spare part
number 16, 25, 66
Bluetooth module
removal 66
spare part number 16, 23, 66
boot options 83
boot order 83
buttons
left TouchPad 5
102 Index
power 7
right TouchPad 5
C
Cable Kit, spare part number 25
cables, service considerations 30
camera module
removal 59
spare part number 59
camera, product description 2
caps lock light, identifying 6
components
bottom 12
display 11
front 9
left side 10
rear 12
right side 9
top 5
computer feet
locations 35
spare part number 35
computer specifications 84
connector, power 9
connectors, service
considerations 30
D
default settings, restoring 80
Diagnostics menu 83
Digital Media Slot, identifying 9
diskette drive
precautions 30
display assembly
removal 56
spare part number 15, 56
display back cover, spare part
number 20
display bezel
illustrated 19
spare part number 19, 26, 59
display bracket
spare part number 24
display bracket and hinge
removal 60
spare part number 61
Display Cable Kit, spare part
number 24, 60
display component recycling 96
display components
illustrated 19
spare part numbers 19
display enclosure
illustrated 19
display hinge cover, spare part
number 24
display panel
illustrated 19
product description 1
removal 60
spare part number 19, 60
spare part numbers 24
Display Screw Kit, spare part
number 20, 24
display specifications 85
drive light 10
drives
boot order 83
preventing damage 30
DVD±RW SuperMulti DL Drive
removal 45
spare part number 24
spare part numbers 18, 21
specifications 87
E
electrostatic discharge 31
esc key, identifying 8
Ethernet, product description 2
external media cards, product
description 3
external monitor port 10
F
f11 91
fan always on 82
fan/heat sink assembly
removal 72
spare part number 15, 72
feet
locations 35
spare part number 35
fingerprint reader board
removal 53
spare part number 15, 25, 53
fingerprint reader light,
identifying 6
fingerprint reader, identifying 7
fn key, identifying 8
G
graphics, product description
grounding equipment and
methods 33
1
H
hard drive
precautions 30
product description 2
removal 43
spare part numbers 18, 21, 43
specifications 86
hard drive bay, identifying 12
hard drive cable, spare part
number 18, 21, 25, 43
hard drive cover
illustrated 20
removal 43
hard drive self test 83
HDMI port, identifying 11
headphone (audio-out) jack 10
heat sink, spare part numbers 26
HP Recovery Manager 91
I
integrated webcam light,
identifying 11
internal microphones, identifying
11
J
jacks
audio in (microphone) 10
audio-out (headphone) 10
network 11
RJ-45 (network) 11
K
keyboard
product description 3
removal 47
spare part numbers 15, 24,
25, 47
keys
action 8
esc 8
fn 8
Windows applications 8
Windows logo 8
L
language support 82
latch, battery release 12
lights
battery 9
caps lock 6
drive 10
fingerprint reader 6
mute 6
optical drive 9
power 10
RJ-45 11
webcam 11
wireless 6
M
Main menu 82
mass storage devices, spare part
numbers 21
memory module
product description 1
removal 37
spare part numbers 17, 25, 37
memory module compartment,
identifying 12
memory test 83
microphone (audio in) jack,
identifying 10
microphone, product description
2
mini-card compartment cover,
illustrated 20
model name 1
mute light, identifying 6
N
network jack, identifying
11
O
operating system, product
description 4
optical drive
identifying 9
precautions 30
product description 2
removal 45
spare part numbers 18, 21, 45
specifications 87
optical drive light, identifying 9
P
packing guidelines 32
passwords 82
plastic parts 29
Plastics kit
contents 20
spare part number 20, 26
pointing device, product
description 3
ports
external monitor 10
HDMI 11
product description 3
USB 9, 11
power button board
removal 55
spare part number 15, 27, 55
power button, identifying 7
power connector cable
removal 64
spare part number 15, 25, 64
power connector, identifying 9
power cord
spare part numbers 22, 23
power light 10
power requirements, product
description 3
power-on password 82
Index 103
processor
product description 1
removal 77
spare part numbers 15, 25, 77
product description
audio 2
camera 2
display panel 1
Ethernet 2
external media cards 3
graphics 1
hard drives 2
keyboard 3
memory module 1
microphone 2
operating system 4
optical drives 2
pointing devices 3
ports 3
power requirements 3
processors 1
product name 1
security 4
serviceability 4
wireless 3
product name 1
R
recovering from the dedicated
recovery partition 91
recovering from the recovery
discs 92
recovery discs 90
recovery, system 91
removal/replacement
preliminaries 29
procedures 34
restore points 95
RJ-45 (network) jack, identifying
11
RJ-45 network light, identifying
11
RTC battery
removal 39
spare part number 22, 23, 39
Rubber Feet Kit, spare part
number 25, 35
S
Screw Kit, spare part number
104 Index
25
secondary hard drive self test 83
security cable slot, identifying 10
Security menu 82
security, product description 4
serial number 13, 34
service considerations 29
serviceability, product
description 4
Setup Utility
changing the language 79
displaying system information
80
exiting 81
menus 82
navigating 80
restoring default settings 80
selecting 80
starting 79
slots
Digital Media 9
Memory module 12
security cable 10
speaker assembly
removal 68
spare part number 15, 25, 68
speakers, identifying 9
specifications
computer 84
display 85
hard drive 86
optical drive 87
system resources 88
static-shielding materials 33
supported discs 90
system board
removal 70
spare part numbers 15, 26, 70
System Configuration menu 82
system information, displaying
80, 82
system recovery 91
system resources 88
system restore points 95
T
thermal module, spare part
number 15, 26
thermal paste, replacement 74,
76
tools required 29
top cover
removal 49
spare part number 15, 26, 27,
49
TouchPad
buttons 5
TouchPad light 5
TouchPad zone, identifying 5
transporting guidelines 32
U
USB board
removal 63
spare part number 15, 27, 63
USB ports, identifying 9, 11
using system restore 95
V
vents, identifying 10, 12
Virtualization Technology 82
W
webcam light, identifying 11
webcam module
removal 59
spare part number 19, 25, 59
webcam, identifying 11
Windows applications key,
identifying 8
Windows logo key, identifying 8
wireless antenna, removal 61
wireless antennas and cables
removal 62
spare part number 62
wireless light 6
wireless, product description 3
wireless/memory module
compartment cover
removal 37
spare part number 37
WLAN antennas, identifying 11
WLAN module
removal 40
spare part numbers 16, 23, 40
workstation guidelines 32
Download PDF

advertising