Pro/Metro/Q/DSTR - Auralex Acoustics

Pro/Metro/Q/DSTR - Auralex Acoustics
ProFusor /Q’Fusor /MetroFusor /DST-R
™
™
™
™
USER GUIDE
Thank you for purchasing Auralex® ProFusor/Q’Fusor/MetroFusor/DST-R!
These are highly effective acoustic diffusion devices that can be easily wall or ceiling mounted.
The ProFusor/Q’Fusor/MetroFusor & DST-R can be mounted with the Auralex EZ-Stick Pro™
peel & stick tabs or Tubetak Pro™ liquid adhesive (not included).
Be advised that the EZ-Stick Pro Tabs and Tubetak Pro are designed for permanent installations
and will damage drywall and painted surfaces when removed.
NOTE: EZ-Stick Pro Tabs are included with ProFusors only.
See your Authorized Auralex dealer for details.
(Continued on back)
900-1112.Pro-Metro-Q User Guide.indd (09/13/2013 - 2:00 PM)
ProFusor /Q’Fusor /MetroFusor /DST-R
™
™
™
™
USER GUIDE
Thank you for purchasing Auralex® ProFusor/Q’Fusor/MetroFusor/DST-R!
These are highly effective acoustic diffusion devices that can be easily wall or ceiling mounted.
The ProFusor/Q’Fusor/MetroFusor & DST-R can be mounted with the Auralex EZ-Stick Pro™
peel & stick tabs or Tubetak Pro™ liquid adhesive (not included).
Be advised that the EZ-Stick Pro Tabs and Tubetak Pro are designed for permanent installations
and will damage drywall and painted surfaces when removed.
NOTE: EZ-Stick Pro Tabs are included with ProFusors only.
See your Authorized Auralex dealer for details.
900-1112.Pro-Metro-Q User Guide.indd (09/13/2013 - 2:00 PM)
(Continued on back)
ProFusor™ / Q’Fusor™ / MetroFusor™ / DST-R™ User Guide
Mark the target position on your wall or ceiling where the panel will be mounted using small pencil marks, pieces of
masking tape or any similar method. It is recommended to clean the wall surface with rubbing alcohol to remove any
dirt, dust or any other oily contaminants before applying EZ-Stick Pro Tabs or Tubetak Pro.
If using EZ-Stick Pro Tabs, remove one of the release layers on the EZ-Stick Pro Tabs and affix it to the rear side of
the near the edge, usually near the corners. Then remove the second layer of release paper from each of the
EZ-Stick Pro Tabs, carefully orient the position prior to contact with the wall, then press in place with moderate
pressure. If using TubeTak Pro, follow installation instructions included with the adhesive.
ProFusor-22™
Q’Fusor™
MetroFusor™
DST-R™
For more product information or installation tips see your authorized
Auralex dealer, visit Auralex.com or call 800-959-3343
www.Auralex.com | 1-800-959-3343 | AuralexInfo@Auralex.com | Total Sound Control
®
ProFusor™ / Q’Fusor™ / MetroFusor™ / DST-R™ User Guide
Mark the target position on your wall or ceiling where the panel will be mounted using small pencil marks, pieces of
masking tape or any similar method. It is recommended to clean the wall surface with rubbing alcohol to remove any
dirt, dust or any other oily contaminants before applying EZ-Stick Pro Tabs or Tubetak Pro.
If using EZ-Stick Pro Tabs, remove one of the release layers on the EZ-Stick Pro Tabs and affix it to the rear side of
the near the edge, usually near the corners. Then remove the second layer of release paper from each of the
EZ-Stick Pro Tabs, carefully orient the position prior to contact with the wall, then press in place with moderate
pressure. If using TubeTak Pro, follow installation instructions included with the adhesive.
ProFusor-22™
Q’Fusor™
MetroFusor™
DST-R™
For more product information or installation tips see your authorized
Auralex dealer, visit Auralex.com or call 800-959-3343
www.Auralex.com | 1-800-959-3343 | AuralexInfo@Auralex.com | Total Sound Control
®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising