Event electronic | Hi-Speed USB 2.0 Flash Disk 2.0 | USB Flash Disk User Manual

USB Flash Disk
USB 2.0
User Manual
Revision 1.0
You should ALWAYS back up your data on a permanent storage device.
FLASH media is not permanent storage. All flash media has a finite life span.
In the event of failure data is not recoverable.
LEGEND and the re-sellers of LEGEND products will not be responsible for
recovering, replacing, or compensating for lost, corrupt or missing data, as a
backup should always be made.
Warranty covers the electronic device only, not any data stored on it.
LEGEND SHALL NOT BE LIABLE UNDER ANY CIRCUMSTANCES FOR ANY
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOSS OF
DATA.
LEGEND USB Flash Disk USB 2.0
1
Features & Specifications
Smart and secure removable data storage for business and personal use
Full Compliance with the Universal Serial Bus Specification v1.1 and v2.0
Offers 128MB, 256MB, 512MB, 1GB capacities
High performance, Interface burst transfer rate 480Mbit/sec (Max.)
Hi-Speed USB Flash Disk Utility Program allows user to configure their password,
and partition sizes.
Support USB Bus Power.
State-of-the-art NAND Flash Memory
Shock resistant, noise-free and longer data retention
ECC Engine
The hardware ECC engine provides robust capability of error detection and data
correction, and it operates on-the-fly without extra firmware effort.
Support Windows 98SE, Windows ME, Windows 2000, Windows XP, and MAC OS
9 or Higher.
LEGEND USB Flash Disk USB 2.0
2
System Requirement
PC: IBM PC/AT Compatible , iMAC
OS: Windows 98SE,Windows ME, Windows 2000,Windows XP,MAC OS 9.0 or
Higher
Interface: USB 2.0 or USB 1.1
HDD Free Space: 1MB
Note:
Windows 98 SE does not support default Mass Storage Driver. You have to install the
driver bundled with the product.
The application software (GFormat) only can run with Microsoft Windows OS.
LEGEND USB Flash Disk USB 2.0
3
GFormat Application Program User Manual
Files Introduction
Boot (Folder): Make bootable disk must files in this folder
BMPLib.dll: This Library of GFormat.exe
FlashKey.exe: Enable Security
FmtUsblib.dll: This Library of GFormat.exe
GFormat.exe: GFormat Application program
Note: You need copy the “GFormat Folder” to Hard Disk form your USB Flash Disk
before run the “GFormat.exe” application program , and you must erase “GFormat folder”
on your USB Flash Disk.
Legend Swivel USB2 drives should ONLY be formatted using
the bundled GFORMAT application.
Use of other formatting software is not supported and may
result in unusual device behavior.
LEGEND USB Flash Disk USB 2.0
4
Change Partition Size Function
1. Execute GFormat.exe
LEGEND USB Flash Disk USB 2.0
5
2. Change Partition Size Setting.
Change partition size for your like partition 1 size and partition 2 size.
3. Press “Format” Button
4. Press “Yes(Y)” Button
Note: Change Partition Size, all data on the device will be erasing.
LEGEND USB Flash Disk USB 2.0
6
5. Format Complete, Please replug in your Device.
Enable Security Function
1. Execute GFormat.exe
2. Select “Enable Security” function
LEGEND USB Flash Disk USB 2.0
7
Input your password and confirm your password
Press “OK” button
3. Press “Format” button
LEGEND USB Flash Disk USB 2.0
8
4. Press “Yes(Y)” button
5. Please replug in your device, Enable Security is success.
LEGEND USB Flash Disk USB 2.0
9
Make Bootable Disk Function
1. Execute GFormat.exe
2. Select USB-ZIP or USB-HDD Bootable Disk function
LEGEND USB Flash Disk USB 2.0
10
3. Press “Format” button
4. Press “Yes(Y)” button
5. Format Complete , Make Bootable Disk success.
LEGEND USB Flash Disk USB 2.0
11
Download PDF