230 /
430 /
470 /
Manual en Español Latino Americano:
http://www.schwinnfitness.com
ASSEMBLY MANUAL / OWNER’S MANUAL
TABLE OF CONTENTS
Important Safety Instructions - Assembly 3
Safety Warning Labels / Serial Number4
Specifications
5
Before Assembly
5
Parts6
Hardware7
Tools7
Assembly8
Moving the Machine
18
Leveling the Machine
19
Important Safety Instructions 20
Features21
Console Features
22
Operations27
Adjustments
27
Power Up / Idle Mode
27
Quick Start Program
28
User Profiles
28
Pausing or Stopping
32
Results / Cool Down Mode
33
GOAL TRACK Statistics
33
Console Service Mode
36
Maintenance37
Maintenance Parts
38
Troubleshooting40
Warranty43
To validate warranty support, keep the original proof of purchase and record the following information:
Serial Number __________________________
Date of Purchase ____________________
To register your product warranty , go to: www.SchwinnFitness.com/register
Or call 1 (800) 605–3369.
If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458).
Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@nautilus.com |
outside U.S. +01-360-859-5180, technics@nautilus.com | Printed in China | © 2013 Nautilus, Inc. | ® indicates trademarks registered in the United
States. These marks may be registered in other nations or otherwise protected by common law. MyFitness Pal® is a registered trademark of its
owner.
2
IMPORTANT SAFETY INSTRUCTIONS
-ASSEMBLY
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Obey the following warnings:
Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
• Keep bystanders and children away from the product you are assembling at all times.
• Do not connect power supply to the machine until instructed to do so.
• Do not assemble this machine outdoors or in a wet or moist location.
• Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.
• Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps
involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
• Set up this machine on a solid, level, horizontal surface.
• Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will
void the warranty.
• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine
replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.
• Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the
Manual.
• Read and understand the complete Manual supplied with this machine before first use. Keep the Manual for future
reference.
• Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.
• This product contains magnets. Magnetic fields can interfere with the normal use of certain medical devices at a close
range. Users may come into proximity of the magnets in the assembly, maintenance, and/or use of the product. Given the
obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical provider
in connection with the use of this equipment. Please consult the “Safety Warning Labels and Serial Number” section to
determine the location of the magnets on this product.
3
SAFETY WARNING LABELS AND
SERIAL NUMBER
• Read, understand and obey all
warnings on this machine.
• Keep children away.
• Not intended for use by anyone
under 14 years of age.
• Prior to use, read and understand
the Owner’s Manual.
• Injury or death is possible if
Caution is not used while using this
machine.
• The maximum user weight for this
machine is 300 lbs (136 kg).
• Replace any “Caution”, “Warning”
or “Danger” label that is illegible,
damaged, or removed.
• The heart rate displayed is an
approximation and should be used
for reference only.
• Lisez et assimilez tous les avertissements
apposés sur cet appareil.
• Gardez les enfants et les animaux de
compagnie éloignés de cette machine en
tout temps
• Déconseillé aux enfants âgés de
moins de 14 ans.
• Lisez et familiarisez-vous avec le Manuel
du propriétaire et avec tous les
avertissements avant d’utiliser cette
machine.
• Soyez prudent lorsque vous utilisez cet
équipement pour ne pas vous infliger de
graves blessures.
• Cette machine supporte un poids
maximal de 300lbs. (136kg).
• Remplacez toute étiquette
d’avertissement endommagée, illisible
ou manquante.
• La fréquence cardiaque qui s’affiche
sur la console est une approximation
et doit être utilisée seulement à titre
indicatif.
8002739_B
Serial Number
Product
specification
FCC Compliance
!
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
The machine and power supply comply with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: T
his machine and power supply have been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
4
SPECIFICATIONS
49.9”
(126.8 cm)
64”
(162.5 cm)
Maximum User Weight: 300 lbs. (136 kg)
Power Requirements: Operational Voltage: Operational Voltage 9VDC
Operating Current: 1500 mA
Regulatory Approvals:
AC Power Adapter:UL listed, CEC certified (or equivalent),
Rated 120V 60Hz Input, 9VDC, 1500mA
Output. Class 2.
27.7”
(70.3 cm)
This product, its packaging, and components contain chemicals known to the State of California to cause cancer,
birth defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition 65. If you
would like additional information, please refer to our website at www.nautilus.com/prop65.
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 74.6” x 110.5” (189.5 cm x 280.5 cm).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the “Important Safety Instructions” before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly can require 2 people.
5
PARTS
17
2
1
3
5
16
6
4
14
15
7
13
8
9
12
Item
Qty
1
1
2
6
Description
10
11
Item
Qty
Description
Console
10
1
AC Adapter
1
Water Bottle Holder
11
1
Left Pedal
3
1
Seat Back
12
1
Front Stabilizer
4
1
Cover
13
1
Right Pedal
5
1
Seat Frame Assembly
14
1
Upper Shroud
6
1
Seat Bottom
15
1
Shroud Cap
7
1
Seat Adjustment Handle
16
1
Console Mast
8
1
Rear Stabilizer
17
1
MP3 Cord
9
1
Frame
HARDWARE / TOOLS
A
Item
Qty
A
8
B
B
C
D
Description
E
F
G
H
I
J
Description
Item
Qty
Button Head Hex Screw, M8x20
F
2
Phillips Head Screw, M5x12
10
Button Head Hex Screw, M6x12
G
14
Lock Washer, M6
C
4
Flat Washer, M8
H
4
Curved Washer, M6
D
8
Lock Washer, M8
I
4
Phillips Head Screw, M6x25
E
10
Flat Washer, M6
J
4
Curved Washer, M8
Tools
Included Not Included
(recommended)
4 mm
6 mm
7
ASSEMBLY
1. Attach Stabilizers to Frame
Note: H
ardware is pre-installed and not on the Hardware Card. *
6mm
X2
*
*
*
6mm
X2
*
*
8
*
9
12
8
2. Attach the Seat Frame Assembly to the Seat Rail
NOTICE: Do not crimp the Heart Rate Cable. Once all hardware has been inserted, be sure to fully tighten it.
X4
6mm
A
D
C
5
X2
B
G
E
4mm
9
3. Attach Seat Pads to Seat Frame Assembly
3
6
X8
E
G
B
4mm
X4
H
G
I
#2
10
4. Attach Cover to Frame Assembly
4
11
5. Attach Seat Adjustment Handle to Frame Assembly
7
12
6. Connect the Cables and Attach the Console Mast to Frame Assembly
NOTICE: Do not crimp Console Cables.
16
14
X4
D
J
A
6mm
15
13
7. Remove Hardware from Console
NOTICE: Do not crimp the cable.
Note: H
ardware is pre-installed and not on the Hardware Card. *
1
X4
*
#2
8. Connect Cables and Attach Console to Frame Assembly
NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not crimp cables.
X4
*
14
9. Attach Pedals to Frame Assembly
NOTICE: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation
is based from a seated position on the bike. The Left Pedal has an “L”, the Right Pedal an “R”.
13
11
15
10. Attach Water Bottle Holder to Frame Assembly
#2
X2
F
16
2
11. Connect AC Adapter to Frame Assembly
10
12. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Be sure to record the serial number in the field provided at the front of this manual.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner’s
Manual.
17
BEFORE YOU START
Moving the Bike
The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you
and others are all physically fit and able to move the machine safely.
1.Remove the power cord.
2.Use the Transport Handle to carefully lift the machine onto the transport rollers.
3.Push the machine into position.
4.Carefully lower the machine into position.
NOTICE: B
e careful when you move the bike. All abrupt motions can affect the computer operation.
18
Leveling the Bike
Levelers are found on each side of the Rear Stabilizer and on the Frame Rail. On the Rear Stabilizer, turn the knob to adjust
the stabilizer foot.
To adjust the leveler on the Frame Rail:
1.Loosen the upper locking nut.
2.Turn the leveler to adjust the height.
Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or
damage to the machine can occur.
3.Tighten the upper locking nut to lock the leveler.
Make sure the bike is level and stable before you exercise.
19
IMPORTANT SAFETY INSTRUCTIONS
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Before using this equipment, obey the following warnings:
Read and understand the complete Manual. Keep the Manual for future reference.
ead and understand all warnings on this machine. If at any time the Warning stickers become loose, unreadable or
R
dislodged, contact Nautilus Customer Service for replacement stickers.
•
Children must not be let on or near to this machine. Moving parts and other features of the machine can be dangerous to
children.
•
Not intended for use by anyone under 14 years of age.
•
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest,
become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or
measured by the machine’s computer for reference purposes only.
•
Before each use, examine this machine for loose parts or signs of wear. Do not use if found in this condition. Monitor the
Seat, Pedals, and Crank Arms closely. Contact Nautilus Customer Service for repair information.
•
Maximum user weight limit: 300 lbs. (136 kg). Do not use if you are over this weight.
•
This machine is for home use only.
•
Do not wear loose clothing or jewelry. This machine contains moving parts. Do not put fingers or other objects into
moving parts of the exercise equipment.
•
Set up and operate this machine on a solid, level, horizontal surface.
•
Make the Pedals stable before you step on them. Use caution when you step on and off the machine.
•
Disconnect all power before servicing this machine.
•
Do not operate this machine outdoors or in moist or wet locations. Keep the foot pedals clean and dry.
•
Keep at least 24” (0.6 m) on each side of the machine clear. This is the recommended safe distance for access and
passage around and emergency dismounts from the machine. Keep third parties out of this space when machine is in
use.
•
Do not over exert yourself during exercise. Operate the machine in the manner described in this manual.
•
Correctly adjust and safely engage all Positional Adjustment Devices. Make sure that the Adjustment Devices do not hit
the user.
•
Exercise on this machine requires coordination and balance. Be sure to anticipate that changes in speed and resistance
level can occur during workouts, and be attentive in order to avoid loss of balance and possible injury.
•
Prior to use, read and understand the owner’s manual. The appliance is not to be used by persons with functional
limitations and impairments, reduced physical, sensory or mental capabilities, or lack of experience and knowledge.
20
FEATURES
B
C
D
A
S
O
N
P
F
Q
E
R
M
L
G
K
H
J
K
J
I
A
Console
K
Leveler
B
MP3 Input
L
Transport Handle
C
USB Port
M
Seat Adjustment Knob
D
Media Tray
N
Water Bottle Holder
E
Fan
O
Adjustable Seat
F
Speakers
P
Contact Heart Rate (CHR) Sensors
G
Fully Shrouded Flywheel
Q
Handlebar, Side
H
Power Connector
R
Pedal
I
Transport Wheel
S
Handlebar, Upright
J
Stabilizer
21
Console Features
The Console provides important information about your workout and lets you control the resistance levels while you exercise.
The Console features the Schwinn Dual Track™ display with touch control buttons to navigate you through the exercise
programs.
10
9
8
7
6
5
4
3
2
1
Upper Display
10
9
8
7
6
5
4
3
2
1
10%
10%
40% 70%
40% 70%
Hr
Hr
20
GOAL TRACK
PROGRAMS
14
Resistance Level Quick Buttons
PAUSE/
END
QUICK
START
18
Lower Display
16
OK
9
CURRENT WORKOUT
12
LAST WORKOUT
5
LAST 7 DAYS
1
7
Resistance Level Quick Buttons
3
Achievement Indicator Lights
Fan
Keypad Functions
Resistance Increase () button- Increases the workout resistance level
Resistance Decrease () button- Decreases the workout resistance level
QUICK START button- Begins a Quick Start workout
PROGRAMS button- Selects a category and workout program
PAUSE / END button- Pauses an active workout, ends a paused workout, or goes back to the previous screen
GOAL TRACK button-Displays the Workout Totals and Achievements for the selected User Profile
Increase () button-Increases a value (age, time, distance, or calories) or moves through options
Left () button- Displays different workout values during a workout, and moves through options
OK button- Starts a Program workout, confirms information, or resumes a paused workout.
Right () button- Displays different workout values during a workout, and moves through options
Decrease () button- Decreases a value (age, time, distance, or calories) or moves through options
FAN button- Controls 3-speed fan
22
Resistance Level Quick Buttons- Shifts the resistance levels to the setting quickly during a workout
Achievement Indicator Lights- when a workout result is reviewed, the achievement indicator light will activate.
Schwinn Dual Track™ Display
Upper Display Data
10
9
8
7
6
5
4
3
2
1
10%
40% 70%
User Display
Achievement Display
Program Display
The Program Display shows information to the User and the grid display area shows the course profile for the program.
Each column in the profile shows one interval (workout segment). The higher the column, the higher the resistance level. The
flashing column shows your current interval.
Hr
20
16
12
7
Intensity Display
The Intensity Display shows the level of work at that moment based on the current resistance level.
Heart Rate Zone Display
The Heart Rate Zone shows which zone the current heart rate value falls into for the current User. These Heart Rate Zones
can be used as a workout guide for a certain target zone (anaerobic, aerobic, or fat burn).
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest,
become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated
or measured by the machine’s computer for reference purposes only.
Note: If no heart rate is detected, the display will be blank.
Goal Display
The Goal Display shows the currently selected type of goal (Distance, Time or Calories), the current value to achieve the goal,
and the percent completed toward the goal.
User Display
The User Display shows which User Profile is currently selected.
Achievement Display
The Achievement Display activates when a workout goal is reached or a workout milestone is surpassed from past workouts.
The Console display will congratulate and inform the User of their achievement, along with a celebratory sound.
23
10%
40% 70%
Lower Display Data
Hr
USE/
ND
20
GOAL TRACK
16
The Lower Display shows the Workout Values. and can be customized for each User (Consult the “Edit User Profile” section
of this manual).
12
CURRENT WORKOUT
Speed
LAST WORKOUT
LAST 7 DAYS
7
The Speed display field shows the machine speed in miles per hour (mph) or kilometers per hour (km/h).
3
Time
The TIME display field shows the total time count of the workout, the average Time for the User Profile, or the total operational
time of the machine.
Note: If a Quick Start workout is performed for more than 99 minutes and 59 seconds (99:59), the units for Time will shift to
hours and minutes ( 1 hour, 40 minutes ).
Distance
The Distance display shows the distance count (miles or km) in the workout.
Note: T
o change the measurement units to English Imperial or metric, refer to the “Console Setup Mode” section in this
manual.
Level
The LEVEL display shows the current resistance level in the workout.
RPM
The RPM display field shows the pedal revolutions per minute (RPM).
Heart Rate (Pulse)
The Heart Rate display shows the beats per minute (BPM) from the heart rate monitor. When a heart rate signal is received by
the Console, the icon will flash.
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest,
become short of breath, or feel faint. Contact your doctor before you use the machine again. The heart rate displayed is
an approximation and should be used for reference only.
Calories
The Calories display field shows the estimated calories that you have burned during the exercise.
24
Contact Heart Rate Sensors
Contact Heart Rate (CHR) sensors send your heart rate signals to the Console. The CHR sensors are the stainless steel parts
of the Handlebars. To use, put your hands comfortably around the sensors. Be sure that your hands touch both the top and
the bottom of the sensors. Hold firm, but not too tight or loose. Both hands must make contact with the sensors for the Console to detect a pulse. After the Console detects four stable pulse signals, your initial pulse rate will be shown.
Once the Console has your initial heart rate, do not move or shift your hands for 10 to 15 seconds. The Console will now
validate the heart rate. Many factors influence the ability of the sensors to detect your heart rate signal:
• Movement of the upper body muscles (including arms) produces an electrical signal (muscle artifact) that can interfere with
pulse detection. Slight hand movement while in contact with the sensors can also produce interference.
• Calluses and hand lotion may act as an insulating layer to reduce the signal strength.
• Some Electrocardiogram (EKG) signals generated by individuals are not strong enough to be detected by the sensors.
• The proximity of other electronic machines can generate interference.
If your heart rate signal ever seems erratic after validation, wipe off your hands and the sensors and try again.
Heart Rate Calculations
Your maximum heart rate usually decreases from 220 Beats Per Minute (BPM) in childhood to approximately 160 BPM by
age 60. This fall in heart rate is usually linear, decreasing by approximately one BPM for each year. There is no indication that
training influences the decrease in maximum heart rate. Individuals of the same age could have different maximum heart rates.
It is more accurate to find this value by completing a stress test than by using an age related formula.
Your at-rest heart rate is influenced by endurance training. The typical adult has an at rest heart rate of approximately 72
BPM, whereas highly trained runners may have readings of 40 BPM or lower.
The Heart Rate table is an estimate of what Heart Rate Zone (HRZ) is effective to burn fat and improve your cardiovascular
system. Physical conditions vary, therefore your individual HRZ could be several beats higher or lower than what is shown.
The most efficient procedure to burn fat during exercise is to start at a slow pace and gradually increase your intensity until
your heart rate reaches between 60 – 85% of your maximum heart rate. Continue at that pace, keeping your heart rate in that
target zone for over 20 minutes. The longer you maintain your target heart rate, the more fat your body will burn.
25
The graph is a brief guideline, describing the generally suggested target heart rates based on age. As noted above, your optimal target rate may be higher or lower. Consult your physician for your individual target heart rate zone.
Note: A
s with all exercises and fitness regimens, always use your best judgment when you increase your exercise time or
intensity.
FAT-BURNING TARGET HEART RATE
Heart Rate BPM (beats per minute)
250
200
196
167
191
162
186
158
150
100
118
115
112
181
154
109
176
171
150
145
106
103
141
100
161
137
97
156
133
94
151
128
91
146
126
88
50
0
20-24 25-29 30-34 35-39 40-44 45-49 50-54 55-59 60-64 65-69
Age
Maximum Heart Rate
Target Heart Rate Zone
(keep within this range
for optimum fat-burning)
26
166
70+
OPERATIONS
What to Wear
Wear rubber-soled athletic shoes. You will need the appropriate clothes for exercise that allow you to move freely.
How Often Should You Exercise
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest,
become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated
or measured by the machine’s computer for reference purposes only. The heart rate displayed on the console may be
inaccurate and should be used for reference only.
• 3 times a week for 30 minutes each day.
• Schedule workouts in advance and try to follow the schedule.
Seat Adjustment
Correct seat placement encourages exercise efficiency and comfort, while reducing the risk of injury.
1.With a Pedal in the forward position, place the ball of your foot over the center of it. Your leg
should be bent slightly at the knee.
2.If your leg is too straight or your foot cannot touch the Pedal, move the seat forward. If your leg
is bent too much, move the seat toward the back.
Step off the bike before you adjust the seat.
3.
Push down on the Seat Adjustment Handle, and adjust the seat to the desired height.
4.
Pull up the Seat Adjustment Handle to engage the locking mechanism. Be sure that the handle
is fully engaged.
Foot Position / Pedal Strap Adjustment
Foot pedals with straps provide secure footing to the exercise bike.
1.Rotate the Pedals until one can be reached.
2.Put the ball of each foot on the Pedals.
3.Fasten the strap over the shoe.
4.Repeat for the other foot.
Be sure toes and knees point directly forward to ensure maximum Pedal efficiency. Pedal straps
can be left in position for subsequent workouts.
Power-Up / Idle Mode
The Console will enter Power-Up / Idle Mode if it is plugged into a power source, any button is pushed, or if it receives a signal
from the RPM sensor as a result of pedaling the machine.
Auto Shut-Off (Sleep Mode)
If the Console does not receive any input in approximately 5 minutes, it will automatically shut off. The LCD display is off while
in Sleep Mode.
Note: The Console does not have an On/Off switch.
27
Initial Setup
During the first power-up, the Console should be setup with the date, time and your preferred measurement units.
1.Date: Push the Increase/Decrease buttons to adjust the currently active value (flashing). Push the Left/Right buttons to
change which segment is the currently active value (month / day / year).
2.Push OK to set.
3.Time: Push the Increase/Decrease buttons to adjust the currently active value (flashing). Push the Left/Right buttons to
change which segment is the currently active value (hour / minute / AM or PM).
4.Push OK to set.
5.Units of Measurement: Push the Increase/Decrease buttons to adjust between “MILES” (Imperial English) or “KM”
(metric).
6. Push OK to set. The Console goes back to the Power-Up / Idle Mode screen.
Note: To adjust these selections, consult the “Console Set-Up Mode” section.
Quick Start ( Manual ) Program
The Quick Start ( Manual ) program lets you start a workout without entering any information.
During a Manual Workout, each column represents a 2 minute time period. The active column will advance across the screen
every 2 minutes. If the workout lasts for more than 30 minutes, the active column is fixed on the farthest column on the right
and pushes the previous columns off the display.
1. Sit on the machine.
2.Push the Increase/Decrease button to select the correct User profile. If you do not have a User profile set up, you can
select a User profile that has no customized data (default values only).
3. Push the QUICK START button to start the Manual program.
4.To change the resistance level, push the Resistance Increase/Decrease buttons. The current interval and future intervals
are set to the new level. The default Manual resistance level is 4. The time will count up from 00:00.
Note: If a Manual workout is performed for more than 99 minutes and 59 seconds (99:59), the units for Time will shift to
hours and minutes ( 1 hour, 40 minutes ).
5.When done with your workout, stop pedaling and push PAUSE/END to pause the workout. Push PAUSE/END again to
end the workout.
Note: The workout results are recorded to the current User Profile.
User Profiles
The Console lets you store and use 2 User profiles. The User profiles automatically record the workout results for each workout,
and allow the workout data to be reviewed.
The User profile stores the following data:
•
•
•
•
•
•
ame—up to 10 characters
N
Age
Weight
Height
Gender
Preferred Workout Values
28
Select a User Profile
Every workout is saved to a User Profile. Be sure to select the proper User Profile before starting a workout. The last User that
completed a workout will be the default user.
User Profiles are assigned the default values until they are customized by editing. Be sure to edit the User Profile for more
accurate calorie and heart rate information.
From the Power-Up Mode screen, push the Increase() or Decrease() buttons to select one of the User Profiles. The
Console will display the name of the User Profile and the User Profile Icon.
Edit User Profile
1.From the Power-Up Mode screen, push the Increase() or Decrease() buttons to select one of the User Profiles.
2.Push the OK button to select the User Profile.
3.The Console display shows the EDIT prompt and the current User Profile name. Push OK to start the Edit User Profile
option.
To exit the Edit User Profile option, push the PAUSE/END button and the console will go back to the Power-Up Mode
screen.
4.
The Console display shows the NAME prompt and the current User Profile name.
Note: The User name will be blank if this is the first edit. The name of a User Profile is limited to 10 characters.
The currently active segment will flash. Use the Increase/Decrease buttons to move through the alphabet and blank space
(found between A and Z). To set each segment, use the Left() or Right() buttons to shift between segments.
Push the OK button to accept the displayed User name.
5.To edit the other User data (EDIT AGE, EDIT WEIGHT, EDIT HEIGHT, EDIT GENDER), use the Increase/Decrease buttons to
adjust, and push OK to set each entry.
6.The Console display shows the SCAN prompt. This option controls how the workout values are displayed in the Lower
Display during a workout. The “OFF” setting allows the user to push the RIGHT or LEFT buttons to view the other workout
value channels when desired. The “ON” setting allows the Console to automatically display the workout value channels
every 6 seconds.
The default is “OFF”.
Push the OK button to set how the workout values are displayed.
7.The Console display shows the WIRELESS HR prompt. If you are using the Console speakers at their higher settings and
/ or using a larger sized personal electronic device, the Console may show Heart Rate interference. This option allows the
Telemetry Heart Rate Receiver to be deactivated blocking the interference.
The Upper Display shows the current value setting: “ON” or “OFF”. Push the Increase() or Decrease() buttons to
change the value.
The default is “ON”.
Push the OK button to set the Telemetry Heart Rate Receiver to active.
8.The Console display shows the EDIT LOWER DISPLAY prompt. This option allows you to customize which Workout Values
are displayed during a workout.
The Lower Display will show all of the workout values, with the active Workout Value flashing. The Upper Display shows
the active value setting: “ON” or “OFF”. Push the Increase() or Decrease() buttons to hide the active workout value,
and push the Left() or Right() buttons to shift the active workout value.
NOTE: to show a hidden workout value, repeat procedure and change Upper Display value to “ON” for that value.
When done with customizing the Lower Display, push the OK button to set it.
29
Hr
9.The Console will go to the Power-Up Mode screen with the user selected.
Reset a User Profile
1.From the Power-Up Mode screen, push the Increase() or Decrease() buttons to select one of the User Profiles.
2.Push the OK button to select the User Profile.
3.The Console display shows the current User Profile name and the EDIT prompt. Push the Increase() or Decrease()
buttons to change the prompt.
ote: To exit the Edit User Profile option, push the PAUSE/END button and the console will go back to the Power-Up
N
Mode screen.
4.The Console display shows the RESET prompt and the current User Profile name. Push OK to start the Reset User Profile
option.
5.
The Console will now confirm the request to reset the User profile (the default selection is ‘NO’). Push the Increase() or
Decrease() buttons to adjust the selection.
6.
Push OK to make your selection.
7. The Console will go to the Power-Up Mode screen.
Changing Resistance Levels
Push the Resistance Level Increase() or Decrease() buttons to change the resistance level at any time in a workout
program. To rapidly change the resistance level, push the desired Resistance Level Quick Button. The Console will adjust to
the selected resistance level of the quick button.
Profile Programs
These programs automate different resistance and workout levels. The Profile Programs are organized into Categories (Fun
Rides, Mountains, and Challenges).
Note: O
nce a User views all the Categories, they will be expanded to display the Programs within each of the Catego-
ndary Case 6: Profile Programs
Secondary
Case 6: Profile Programs
ries.
FUN RIDES
FUN RIDES
FUN RIDES
Rolling
Rolling Hills
Ride in the Park
Ride ininthe
Park
RollingHills
HillsRide
the
Park
Easy Tour
Easy Tour
Stream Crossing
Pike’s Peak
MOUNTAINS
MOUNTAINS
Easy Tour
Stream Crossing
Easy
Tour Pike’s Peak
Mount Hood
Mount Hood
Pyramids
Pyramids
Summit Pass
Cross-Training
Interval
Interval
Stairs
Pyramids
Summit Pass
Uphill Finish
GES
GES
30
Uphill Finish
Cross-Training
Rolling Hills
Ride in the Park
Easy Tour
Easy Tour
Stream Crossing
Ride in the Park
Stream Crossing
Ride in the Park
Easy Tour
Easy Tour
Stream Crossing
Pike’s Peak
Pike’s Peak
Mount Hood
Mount Hood
Pike’s
Peak Mount
Hood
Pyramids
Pyramids
Summit Pass
FUN RIDES
Ride in the Park
FUN RIDES
Rolling Hills
MOUNTAINS
Easy Tour
Stream Crossing
Pike’s Peak
Mount Hood
Mount Hood
Pyramids
Pyramids
Summit Pass
Uphill Finish
Cross-Training
Cross-Training
Interval
Interval
Stairs
Interval
Interval
Stairs
Pyramids
Summit Pass
Pyramids
Uphill Finish
Uphill Finish
Cross-Training
Cross-Training
Uphill
Finish Cross-Training
Interval
Stairs
Uphill Finish
Pyramids
CHALLENGES
CHALLENGES
CHALLENGES
MOUNTAINS
CHALLENGES
MOUNTAINS
Pike’s Peak
Rolling Hills
MOUNTAINS
FUN RIDES
Rolling Hills
Easy Tour
CHALLENGES
MOUNTAINS
FUN RIDES
ondary Case 6: Profile Programs
Secondary Case 6: Profile Programs
Summit Pass
Interval
Stairs
Interval
REVED : 122612
REVED : 122612
Workout Profile and Goal Program
The Console lets you select the Profile Program and type of Goal for your workout (Distance, Time or Calories), and set the
Goal value.
REVED : 122612
REVED : 122612
1. Sit on the machine.
2. Push the Increase() or Decrease() buttons to select the correct User profile.
3.Push the Programs button.
4.Push the Left() or Right() buttons to select a Category of Workout.
5.Push the Increase() or Decrease() buttons to select a Profile Workout, and push OK.
6.Use the Increase() or Decrease() buttons to select a type of Goal (Distance, Time or Calories), and push OK.
7.
Use the Increase() or Decrease() buttons to adjust the workout value.
8.
Push OK to begin the goal-oriented workout. The GOAL value will count down as the value for percent completed
increases.
Note: During a Calories Goal, each column is for a 2 minute time period. The active column will advance across the screen
every 2 minutes. If the workout lasts for more than 30 minutes, the active column will fix to the last right column and push
the previous columns off the display.
Fitness Test Program
The Fitness Test measures the improvements of your physical fitness level. The test compares your power output (in Watts) to
your heart rate. As your fitness level improves, your power output will increase at a given heart rate.
Note: The Console must be able to read the heart rate information from the Contact Heart Rate (CHR) sensors to work
correctly.
31
You can start the Fitness Test from the FEEDBACK category. The Fitness Test program first prompts you to select your fitness
level—Beginner ( “BEG” ) or Advanced ( “ADV” ). The Console will use the Age and Weight values for the selected User Profile
to calculate the Fitness Score.
Start to workout and hold the Heart Rate Sensors. When the test starts, the intensity of the workout slowly increases. This
means you will work harder, and as a result, your heart rate increases. The intensity continues to increase automatically until
your heart rate reaches the “Test Zone”. This zone is individually computed to be near 75 percent of the maximum heart rate
of your User Profile. When you reach the Test Zone, the machine holds the intensity steady for 3 minutes. This lets you reach
a stable condition (where your heart rate becomes steady). At the end of the 3 minutes, the Console measures your heart
rate and the power output. These numbers, along with information about your age and weight, are computed to produce a
“Fitness Score”.
Note: Fitness Test scores should only be compared to your previous scores and not to other User Profiles.
Compare your Fitness Scores to see your improvement.
Heart Rate Control (HRC) Workout Programs
The Heart Rate Control (HRC) programs let you set a heart rate goal for your workout. The program monitors your heart rate
in beats per minute (BPM) from the Contact Heart Rate (CHR) sensors on the machine or from a Heart Rate Monitor (HRM)
chest strap, and adjusts the workout to keep your heart rate in the selected zone.
Note: The console must be able to read the heart rate information from the CHR sensors or HRM for the HRC program to
work correctly.
The Target Heart Rate programs use your age and other User information to set the Heart Rate Zone values for your workout.
The console display then gives prompts for you to set up your workout:
1.Select the Heart Rate Control workout level: BEGINNER ( “BEG” ) or ADVANCED ( “ADV” ) and push OK.
2.Push the Increase() or Decrease() buttons to select the percentage of maximum heart rate: 50–60%, 60–70%, 70–
80%, 80–90%.
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest,
become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated
or measured by the machine’s computer for reference purposes only. The heart rate displayed on the console is an
approximation and should be used for reference only.
3.
Push the Increase() or Decrease() buttons to select the Goal type, and push OK.
4.
Push the Increase() or Decrease() buttons to set the goal value for the workout.
Note: Be sure to allow time for your heart rate to reach the desired heart rate zone when setting the goal.
5.Push OK to start the workout.
Changing a Workout Program During a Workout
The Console allows a different Workout Program to be started from an active workout.
1.From an active workout, push PROGRAMS.
2.Push the Increase() or Decrease() buttons to select the desired workout program, and push OK.
3.
Push the Increase() or Decrease() buttons to select the Goal type, and push OK.
4.
Push the Increase() or Decrease() buttons to set the value for the workout.
5.Push OK to stop the active workout and start the new workout.
The previous workout values are saved to the User Profile.
32
Pausing or Stopping
The Console will go into Pause Mode if the user stops pedaling and pushes PAUSE/END during a workout, or there is no
RPM signal for 5 seconds (user not pedaling). The Console will cycle through a series of messages that change every 4
seconds:
- WORKOUT PAUSED
- PEDAL TO CONTINUE (if a bike) / STRIDE TO CONTINUE (if an elliptical)
- PUSH END TO STOP
During a paused workout, you can use the Increase/Decrease buttons to move through the result channels manually.
1. Stop pedaling and push the PAUSE/END button to pause your workout.
2. To continue your workout, push OK or start pedaling.
To stop the workout, push the PAUSE/END button. The Console will go into Results / Cool Down mode.
Results / Cool Down Mode
After a workout the GOAL display shows 03:00 and then starts to count down. During this Cool Down period, the Console
shows the Workout Results. All workouts except Quick Start have a 3-minute Cool Down period.
After a workout the GOAL display shows 03:00 and then starts to count down. During this Cool Down period, the Console
shows the Workout Results. All workouts except Quick Start have a 3-minute Cool Down period.
The LCD display shows the Current Workout values in three channels:
a.)TIME (total), DISTANCE (total), and CALORIES (total)
b.)SPEED (average), RPM (average), and HEART RATE (average)
c.)TIME (average), LEVEL (average), and CALORIES (average).
Push the Left() or Right() buttons to move through the result channels manually.
During the Cool Down period, the Resistance Level will adjust to a third of the average Level of the workout. The Cool Down
resistance level can be adjusted with the Resistance Increase and Decrease buttons, but the Console will not display the
value.
You can push PAUSE/END to stop the Results / Cool Down period and go back to Power-Up Mode. If there is no RPM or HR
signal, the Console automatically goes into Sleep Mode.
GOAL TRACK Statistics (and Achievements)
The statistics from every workout are recorded to a User Profile.
The Schwinn Dual Track™ Console shows the Goal Track workout Statistics on the Lower Display in three channels:
a.)TIME (total), DISTANCE (total), and CALORIES (total)
b.)SPEED (average), RPM (average), and HEART RATE (average)
c.)TIME (average), DISTANCE (average) / or LEVEL (average) *, and CALORIES (average)
* If the Goal Track Statistic is a single workout, LEVEL (average) is displayed. If the Goal Track Statistic is a
combination of multiple workouts, DISTANCE (average) is displayed instead of LEVEL (average).
To view the GOAL TRACK statistics of a User Profile:
1.From the Power-Up screen, push the Increase() and Decrease() buttons to select a User Profile.
33
2.Push the GOAL TRACK button. The Console will display the LAST WORKOUT values and activate the corresponding
Achievement light.
Note: G
oal Track statistics can be viewed even during a workout. Push GOAL TRACK and the LAST WORKOUT values will
be displayed. The workout values for the current workout will be hidden except for the GOAL display. Push GOAL
TRACK again to return to the Power-Up screen.
3.Push the Increase() button to move to the next GOAL TRACK statistic, “LAST 7 DAYS”. The Console will display the calories burnt on the display (50 calories per segment) for the previous seven days, along with the workout value totals. Use the
Left() or Right() buttons to move through all the workout statistic channels.
4.Push the Increase() button to move to “BMI”, or Body Mass Index. The Console will display the BMI value based on the
User settings. Be sure the height value is correct for your User Profile, and the weight value is current.
The BMI Measurement is a useful tool that shows the relationship between weight and height that is associated with body fat
and health risk. The table below gives a general rating for the BMI score:
Underweight
Below 18.5
Normal
18.5 – 24.9
Overweight
25.0 – 29.9
Obesity
30.0 and above
Note: T
he rating may overestimate body fat in athletes and others who have a muscular build. It may also underestimate
body fat in older persons and others who have lost muscle mass.
Contact your doctor for more information about Body Mass Index (BMI) and the weight that is appropriate for you. Use
the values calculated or measured by the machine’s computer for reference purposes only.
5.Push the Increase() button to move to the “SAVE TO USB - OK?” prompt. Push OK, and the “ARE YOU SURE? -NO”
prompt will display. Push the Increase() button to change it to yes and push OK. The Console will display the “INSERT
USB” prompt. Insert a USB Flash Drive into the USB Port. The Console will record the Statistics to the USB Flash Drive.
The Console will display “SAVING”, and then “REMOVE USB” when it is safe to remove the USB Flash Drive.
Note: P
ush the PAUSE/END button to force an exit from the “SAVING” prompt.
6.Push the Increase() button to move to the “CLEAR WORKOUT DATA -OK?”. Push OK, and the “ARE YOU SURE? - NO”
prompt will display. Push the Increase() button to change to the “ARE YOU SURE? - YES” display, and push OK. The
user workouts have been reset.
7.Push GOAL TRACK to return to the Power-Up screen.
www.SchwinnConnect.com
Go to the www.SchwinnConnect.com web site to create an online profile, upload your workout results using a USB Flash
Drive, and then view and track your achievements over time.
www.SchwinnConnect.com also works with MyFitnessPal®. Simply follow the prompts from the “Link to MyFitnessPal® ”
button, and your workout results will be available with your existing MyFitnessPal® profile.
34
CONSOLE SETUP MODE
The Console Setup Mode lets you input the date and time, set the units of measurement to either English or Metric, change
the machine type, control the sound settings ( on/ off), or see maintenance statistics (Error Log and Run Hours – for service
technician use only).
1.Hold down the PAUSE/END button and Right button together for 3 seconds while in the Power-Up Mode to go into the
Console Setup Mode.
Note: Push PAUSE/END to exit the Console Setup Mode and return to the Power-Up Mode screen.
2.The Console display shows the Date prompt with the current setting. To change, push the Increase/Decrease buttons to
adjust the currently active value (flashing). Push the Left/Right buttons to change which segment is the currently active
value (month / day / year).
3.Push OK to set.
4.The Console display shows the Time prompt with the current setting. Push the Increase/Decrease buttons to adjust the
currently active value (flashing). Push the Left/Right buttons to change which segment is the currently active value (hour /
minute / AM or PM).
5.Push OK to set.
6.The Console display shows the Units prompt with the current setting. To change, push OK to start the Units option. Push
the Increase/Decrease buttons to change between “MILES” (Imperial English units) and “KM” (metric units).
Note: If the units change when there is data in User Statistics, the statistics convert to the new units.
7. Push OK to set.
8.The Console display shows the Machine Type prompt with the current setting. Push the Increase/Decrease buttons to
change between “BIKE” and Elliptical (“ELIP”).
9. Push OK to set.
10.The Console display shows the Sound Settings prompt with the current setting. Push the Increase/Decrease buttons to
change between “ON” and “OFF”.
11. Push OK to set.
12.The Console display shows the TOTAL RUN HOURS for the machine.
13. For the next prompt, push the OK button.
14.The Console display shows the Software Version prompt.
15. For the next prompt, push the OK button.
16 .The Console will display the Power-Up Mode screen.
35
MAINTENANCE
Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do the
necessary tasks.
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular
maintenance is done. Worn or damaged components must be repaired or replaced immediately. Only manufacturer
supplied components can be used to maintain and repair the equipment.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always
unplug the power cord from the wall outlet and the machine and wait 5 minutes before cleaning,
maintaining or repairing the machine. Place the power cord in a secure location.
Before each use, examine the exercise machine for loose, broken,
damaged, or worn parts. Do not use if found in this condition. Repair or
replace all parts at the first sign of wear or damage. After each workout,
use a damp cloth to wipe your machine and Console free of sweat.
Daily:
Note: Avoid excessive moisture on the Console.
Clean the machine to remove any dust, dirt, or grime from the surfaces.
Check for smooth seat slider operation. If needed, apply a very thin
coating of silicone lube to ease operation.
Weekly:
Note: Do not use petroleum based products.
Monthly
or after 20 hours:
36
Check pedals and crank arms and tighten as necessary. Make sure all
bolts and screws are tight. Tighten as necessary.
NOTICE: D
o not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console free of
moisture.
Maintenance Parts
A
B
CC
C
D
AA BB
Z
Y
E
F
G
X
H
W
K
N
V
M
O
P
L
J
I
T
U
Q
S
R
37
A
Console
K
Frame Assembly
U
Flywheel
B
Seat Back
L
Transport Wheel
V
Console Cable, Lower
C
Seat Cover
M
Stabilizer, Front
W
Shroud, Right
D
Water Bottle Holder
N
Heart Rate Cable, Lower
X
Pedal, Right
E
Handlebar, Side
O
Speed Sensor Magnet
Y
Shroud, Upper
F
Seat Bottom
P
Speed Sensor
Z
Shroud Cap
G
Seat Adjustment Handle
Q
Crank Arm
AA
Console Cable, Upper
H
Rear Stabilizer
R
Servo Motor
BB
Heart Rate Cable, Lower
I
Shroud, Left
S
Brake Assembly
CC
Console Mast
J
Pedal, Left
T
Drive Belt
38
TROUBLESHOOTING
Condition/Problem
No display/partial display/
unit will not turn on
Things to Check
Solution
Check electrical (wall)
outlet
Make sure unit is plugged into a functioning wall outlet.
Check connection at front
of unit
Connection should be secure and undamaged. Replace adapter
or connection at unit if either are damaged.
Check data cable integrity
All wires in cable should be intact. If any are visibly crimped or
cut, replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly. Small
latch on connector should line up and snap into place.
Check console display for
damage
Check for visual sign that console display is cracked or otherwise
damaged. Replace Console if damaged.
Console Display
If Console only has partial display and all connections are fine,
replace the Console.
If the above steps do not resolve the problem, contact Customer
Care for further assistance.
Unit operates but Contact
HR not displayed
Unit operates but Telemetric HR not displayed
HR cable connection at
Console
Be sure cable is connected securely to Console.
HR cable box connection
Be sure cables from handlebars and cable to Console are secure
and undamaged.
Sensor grip
Be sure hands are centered on HR sensors. Hands must be kept
still with relatively equal pressure applied to each side.
Dry or calloused hands
Sensors may have difficulty with dried out or calloused hands.
A conductive electrode cream (heart rate cream) can help make
better conduct. These are available on the web or at medical or
some larger fitness stores.
Static Handlebar
If tests reveal no other issues, Static Handlebar should be replaced.
Chest Strap (optional)
Strap should be “POLAR®” compatible and uncoded. Make sure
strap is directly against skin and contact area is wet.
Interference
Try moving unit away from sources of interference (TV, Microwave, etc).
Replace Chest Strap
If interference is eliminated and HR does not function, replace
strap.
Replace Console
If HR still does not function, replace Console.
Console displays “E2” error Check data cable integrity
code
All wires in cable should be intact. If any are cut or crimped,
replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly. Small
latch on connector should line up and snap into place.
Console Electronics
If tests reveal no other issues, contact Customer Care.
39
No speed/RPM reading,
Console displays “Please
Pedal” error code
Check data cable integrity
All wires in cable should be intact. If any are cut or crimped,
replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly. Small
latch on connector should line up and snap into place.
Check magnet position
(requires shroud removal)
Magnet should be in place on pulley.
Check Speed Sensor (requires shroud removal)
Speed sensor should be aligned with magnet and connected to
data cable. Realign sensor if necessary. Replace if there is any
damage to the sensor or the connecting wire.
Check electrical (wall)
outlet
Make sure unit is plugged into a functioning wall outlet.
Check connection at front
of unit
Connection should be secure and undamaged. Replace adapter
or connection at unit if either are damaged.
Check data cable integrity
All wires in the cable should be intact. If any are cut or crimped,
replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly. Small
latch on connector should line up and snap into place.
Reset machine
Unplug unit from electrical outlet for 3 minutes. Reconnect to
outlet.
Check magnet position
(requires shroud removal)
Magnet should be in place on pulley.
Check Speed Sensor (requires shroud removal)
Speed sensor should be aligned with magnet and connected to
data cable. Realign sensor if necessary. Replace if there is any
damage to the sensor or the connecting wire.
Check data cable integrity
All wires in cable should be intact. If any are cut or crimped,
replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly. Small
latch on connector should line up and snap into place.
Reset machine
Unplug unit from electrical outlet for 3 minutes. Reconnect to
outlet.
Fan will not turn on, but
Console operates
Check for blockage of fan
Unplug unit from electrical outlet for 5 minutes. Remove material
from fan. If necessary, detach the Console to help with removal.
Replace the Console if unable to remove blockage.
Unit rocks/does not sit
level
Check leveler adjustment
Adjust levelers until machine is level.
Check surface under unit
Adjustment may not be able to compensate for extremely uneven
surfaces. Move machine to level area.
Pedals loose/unit difficult
to pedal
Check pedal to crank connection
Pedal should be tightened securely to crank. Be sure connection
is not cross threaded.
Seat Assembly shifts /
squeaks when in use
Hardware
Check hardware that attaches Seat assembly, and fully tighten
hardware.
Console shuts off (enters
sleep mode) while in use
Fan will not turn on or will
not turn off
40
WARRANTY
Who Is Covered
This warranty is valid only to the original purchaser and is not transferable or applicable to any other person(s).
What Is Covered
Nautilus, Inc. warrants that this product is free from defects in materials and workmanship, when used for the purpose intended, under normal conditions, and provided it receives
proper care and maintenance as described in the Product’s Assembly and Owner’s manual. This warranty is good only for authentic, original, legitimate machines manufactured by
Nautilus, Inc. and sold through an authorized agent and used in the United States or Canada.
Terms
•
Frame 10 years
•
Mechanical parts
2 years
•
Electronics
1 year
•
Labor 3 months
(Labor support does not include the installation of replacement parts involved in the initial product assembly and preventative maintenance services.)
How Nautilus Will Support the Warranty
Throughout the terms of the warranty coverage, Nautilus, Inc. will repair any machine that proves to be defective in materials or workmanship. Nautilus reserves the right to replace
the product in the event a repair is not possible. When Nautilus determines replacement is the correct remedy, Nautilus may apply a limited credit reimbursement toward another
Nautilus, Inc. brand Product, at our discretion. This reimbursement may be prorated based on length of ownership. Nautilus, Inc. provides repair service within major metropolitan
areas. Nautilus, Inc. reserves the right to charge the consumer for travel outside these areas. Nautilus, Inc. is not responsible for dealer labor or maintenance charges beyond the
applicable warranty period(s) stated herein. Nautilus, Inc. reserves the right to substitute material, parts or products of equal or better quality if identical materials or products are
not available at the time of service under this warranty. Any replacement of the product under the terms of the Warranty in no way extends the original Warranty period. Any limited
credit reimbursement may be prorated based on length of ownership. THESE REMEDIES ARE THE EXCLUSIVE AND SOLE REMEDIES FOR ANY BREACH OF WARRANTY.
What You Must Do
•
Retain appropriate and acceptable Proof of Purchase.
•
Operate, maintain, and inspect the Product as specified in the Product Documentation (Assembly, Owner’s Manuals, etc.).
•
Product must be used exclusively for the purpose intended.
•
Notify Nautilus within 30 days after detecting an issue with the Product.
•
Install replacement parts or components in accordance with any Nautilus instructions.
•
Perform diagnostic procedures with a trained Nautilus, Inc representative if requested.
What Is Not Covered
•
Damage due to abuse, tampering or modification of the Product, failure to properly follow assembly instructions, maintenance instructions, or safety warnings as stated in the
Product Documentation (Assembly, Owner’s Manuals, etc), damage due to improper storage or the effect of environmental conditions such as moisture or weather, misuse,
mishandling, accident, natural disasters, power surges.
•
A machine placed or used in a commercial or institutional setting. This includes gyms, corporations, work places, clubs, fitness centers and any public or private entity that
has a machine for use by its members, customers, employees or affiliates.
•
Damage caused by exceeding maximum user weights as defined in the Product’s Owner’s manual or warning label.
•
Damage due to normal usage and wear and tear.
•
This warranty does not extend to any territories or countries outside the United States and Canada.
How to Obtain Service
For Products purchased directly from Nautilus, Inc. contact the Nautilus office listed on the Contacts page of the products Owner’s manual. You may be required to return the
defective component to a specified address for repair or inspection, at your expense. Standard ground shipping of any warranty replacement parts will be paid by Nautilus, Inc. For
products purchased from a retailer, you may be asked to contact your retailer for warranty support.
Exclusions
The preceding warranties are the sole and exclusive express warranties made by Nautilus, Inc. They supersede any prior, contrary or additional representations, whether oral or
written. No agent, representative, dealer, person or employee has the authority to alter or increase the obligations or limitations of this warranty. Any implied warranties, including
the WARRANTY OF MERCHANTABILITY and any WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, are limited in duration to the term of the applicable express warranty
provided above, whichever is longer. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Limitation of Remedies
EXCEPT AS OTHERWISE REQUIRED BY APPLICABLE LAW, THE PURCHASER’S EXCLUSIVE REMEDY IS LIMITED TO REPAIR OR REPLACEMENT OF ANY COMPONENT DEEMED BY
NAUTILUS, INC. TO BE DEFECTIVE UNDER THE TERMS AND CONDITIONS STATED HEREIN. IN NO EVENT WILL NAUTILUS, INC. BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, INDIRECT OR ECONOMIC DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING, WITHOUT LIMITATION, PRODUCT LIABILITY, NEGLIGENCE OR OTHER
TORT) OR FOR ANY LOST REVENUE, PROFIT, DATA, PRIVACY OR FOR ANY PUNITIVE DAMAGES ARISING OUT OF OR RELATED TO THE USE OF THE FITNESS MACHINE EVEN IF
NAUTILUS, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS EXCLUSION AND LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL
PURPOSE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL OR INCIDENTAL TYPE DAMAGES SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU.
State Laws
This warranty gives you specific legal rights. You may also have other rights, which vary from state to state.
Expirations
If the warranty has expired, Nautilus, Inc. may assist with replacements or repairs to parts and labor, but there will be a charge for these services. Contact a Nautilus office for
information on post-warranty parts and services. Nautilus does not guarantee availability of spare parts after expiration of warranty period.
International Purchases
If you purchased your machine outside of the United States consult your local distributor or dealer for warranty coverage.
41
EN
Nautilus®
8002152.100114.E
Bowflex®
Schwinn® Fitness
Universal®