VIZIO
USER MANUAL
Model D43-C1
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see
http://patents.dts.com.
Manufactured under license from DTS Licensing Limited. DTS,
the Symbol, & DTS and the Symbol together are registered
trademarks, and DTS Studio Sound is a trademark of
DTS, Inc. © DTS, Inc. All Rights Reserved.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
This product qualifies for ENERGY STAR in the “factory
default” setting and this is the setting in which power
savings will be achieved. Changing the factory default
picture settings or enabling other features will increase
power consumption that could exceed the limits necessary
to qualify for ENERGY STAR rating. For more information on
the ENERGY STAR program, refer to energystar.gov.

THANK YOU FOR CHOOSING VIZIO
IMPORTANT SAFETY INSTRUCTIONS
Congratulations on the purchase of your new VIZIO HDTV.
Your TV is designed and manufactured to operate within defined
design limits. Misuse may result in electric shock or fire. To prevent
your TV from being damaged, the following instructions should be
observed for the installation, use, and maintenance of your TV.
Read the following safety instructions before operating your TV.
Keep these instructions in a safe place for future reference.
To get the most out of your new VIZIO product, read these
instructions before using your product and retain them for future
reference. Be sure to inspect the package contents to ensure there
are no missing or damaged parts.
PRODUCT REGISTRATION
•
To purchase or inquire about accessories and installation services
for your VIZIO product, visit our website at www.VIZIO.com or call
toll free at (877) 698-4946.
To reduce the risk of electric shock or component damage,
switch off the power before connecting other components
to your TV.
•
Read these instructions.
•
Keep these instructions.
We recommend that you either:
•
Heed all warnings.
•
Register your VIZIO product at www.VIZIO.com
•
Follow all instructions.
•
Complete and mail the enclosed registration card
•
Do not use this apparatus near water.
•
Clean only with dry cloth.
•
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
•
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
•
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
•
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
•
Only use attachments/accessories specified by the
manufacturer.
Extended Warranties
For peace of mind, and to protect your investment beyond the
standard warranty, VIZIO offers on-site extended warranty service
plans. These plans provide additional coverage during the standard
warranty period. To purchase an extended warranty service plan,
visit www.VIZIO.com.
WHEN READING THIS MANUAL
When you see this symbol, please read the
accompanying important warning or notice. It is
intended to alert you to the presence of important
operating instructions.
When you see this symbol, please read the
accompanying helpful tip.

• Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
•
Do not apply pressure or throw objects at your TV. This may
compromise the integrity of the display. The manufacturer’s
warranty does not cover user abuse or improper
installations.
•
The power cord must be replaced when using different
voltage than the voltage specified. For more information,
contact your dealer.
•
When connected to a power outlet, power is always flowing
into your TV. To totally disconnect power, unplug the power
cord.
•
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of un-isolated, dangerous voltage within the
inside of your TV that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
•
Do not overload power strips and extension cords.
Overloading can result in fire or electric shock.
•
The wall socket should be installed near your TV and easily
accessible.
•
Only power of the marked voltage can be used for your TV.
Any other voltage than the specified voltage may cause fire
or electric shock.
•
Do not touch the power cord during lightning. To avoid
electric shock, avoid handling the power cord during
electrical storms.
•
Unplug your TV during a lightning storm or when it will not
be used for long period of time. This will protect your TV
from damage due to power surges.
•
Do not attempt to repair or service your TV yourself.
Opening or removing the back cover may expose you to
high voltages, electric shock, and other hazards. If repair
is required, contact your dealer and refer all servicing to
qualified service personnel.
•
WARNING: Keep your TV away from moisture. Do not
expose your TV to rain or moisture. If water penetrates into
your TV, unplug the power cord and contact your dealer.
• Unplug the power cord before cleaning your TV.
• When moving your TV from an area of low temperature to
an area of high temperature, condensation may form in the
housing. Wait before turning on your TV to avoid causing
fire, electric shock, or component damage.
• A distance of at least three feet should be maintained
between your TV and any heat source, such as a radiator,
heater, oven, amplifier etc. Do not install your TV close to
smoke. Operating your TV close to smoke or moisture may
cause fire or electric shock.
• Slots and openings in the back and bottom of the cabinet
are provided for ventilation. To ensure reliable operation of
your TV and to protect it from overheating, be sure these
openings are not blocked or covered. Do not place your
TV in a bookcase or cabinet unless proper ventilation is
provided.
• Never push any object into the slots and openings on your
TV cabinet. Do not place any objects on the top of your TV.
Doing so could short circuit parts causing a fire or electric
shock. Never spill liquids on your TV.
• Your TV should be operated only from the type of power
source indicated on the label. If you are not sure of the type
of power supplied to your home, consult your dealer or
local power company.

Continuous use in this case may result in fire or electric
shock.
•
Do not use your TV if any abnormality occurs. If any smoke
or odor becomes apparent, unplug the power cord and
contact your dealer immediately. Do not try to repair your
TV yourself.
•
Avoid using dropped or damaged appliances. If your TV
is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power
cord immediately and contact your dealer for repair.
Continued use of your TV may cause fire or electric shock.
•
Do not install your TV in an area with heavy dust or high
humidity. Operating your TV in environments with heavy
dust or high humidity may cause fire or electric shock.
•
Follow instructions for moving your TV. Ensure that the
power cord and any other cables are unplugged before
moving your TV.
•
When unplugging your TV, hold the AC/DC power adapter,
not the cord. Pulling on the power cord may damage the
wires inside the cord and cause fire or electric shock. When
your TV will not be used for an extended period of time,
unplug the power cord.
•
To reduce risk of electric shock, do not touch the connector
with wet hands.
•
Insert batteries in accordance with instructions. Incorrect
polarities may cause the batteries to leak which can
damage the remote control or injure the operator. Do not
expose batteries to excessive heat such as sunshine, fire or
the like.
•
If any of the following occurs, contact the dealer:
- The power cord fails or frays.
- Liquid sprays or any object drops into your TV.
- Your TV is exposed to rain or other moisture.
- Your TV is dropped or damaged in any way.
- The performance of your TV changes substantially.
•
This apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
•
The mains plug or appliance coupler is used as the
disconnect device, the disconnect device shall remain
readily operable.
•
CAUTION - These servicing instructions are for use by
qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than
that contained in the operating instructions unless you are
qualified to do so.
h
•
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated DANGEROUS VOLTAGE within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electrical shock to persons.

TELEVISION ANTENNA CONNECTION
PROTECTION
If an outside antenna/satellite dish or cable system is to be
connected to the TV, make sure that the antenna or cable system
is electrically grounded to provide some protection against voltage
surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of the grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
requirements of the grounding electrode.
Ground Clamp
Lightning Protection
For added protection of the TV during a lightning storm or when it
is left unattended or unused for long periods of time, unplug the TV
from the wall outlet and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or
where it could fall into such power lines or circuits. Remember, the
screen of the coaxial cable is intended to be connected to earth in
the building installation.
Antenna Lead In Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Electric Service Equipment
Power Service Grounding Electrode System
(NEC ART 250, part H)
Table of Contents
Installing the TV......................................................3
Adjusting the Color Calibration Settings............................. 25
Inspecting the Package Contents . . . . . . . . . . . . . . . . . . . . . . . 3
Adjusting the Color Tuner Settings...................................... 26
Installing the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Adjusting the Audio Settings. . . . . . . . . . . . . . . . . . . . . . . . . . 29
Installing the TV Stand............................................................ 3
Changing the Equalizer Settings.......................................... 30
Installing the Stand................................................................. 4
Deleting the Custom Audio Mode........................................ 30
Installing the TV on a Wall...................................................... 6
Setting Timers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setting the Sleep Timer........................................................ 31
Controls and Connections......................................7
Setting the Auto Power Off Feature..................................... 31
Back Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting Up Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Selecting a Channel Source.................................................. 32
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Finding Channels................................................................... 32
Using the Remote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adding New Channels........................................................... 33
Replacing the Batteries......................................................... 11
Skipping Channels................................................................. 34
Connecting Your Devices......................................12
Listening to Alternate Audio . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Connecting A Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing the Analog Audio Language................................. 35
Connecting an Audio Device. . . . . . . . . . . . . . . . . . . . . . . . . . 15
Changing the Digital Audio Language................................. 35
Connecting an Audio Device - ARC. . . . . . . . . . . . . . . . . . . . . 17
Setting Up Closed Captioning . . . . . . . . . . . . . . . . . . . . . . . . . 36
Changing the Appearance of Digital Closed Captions........ 36
Completing the First-Time Setup.........................18
Renaming Devices on the Input Menu. . . . . . . . . . . . . . . . . . 38
Using the On-Screen Menu..................................19
Changing the TV Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Navigating the On-Screen Menu. . . . . . . . . . . . . . . . . . . . . . . 19
Viewing System Information................................................ 39
Changing the Input Source . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Changing the On-Screen Menu Language........................... 40
Changing the Screen Aspect Ratio . . . . . . . . . . . . . . . . . . . . . 20
Setting the Time and Local Settings..................................... 40
Adjusting the Picture Settings. . . . . . . . . . . . . . . . . . . . . . . . . 21
Using the Parental Controls................................................. 41
Adjusting the More Picture Settings.................................... 22
Accessing the Parental Controls Menu................................ 41
Adjusting the Picture Mode Edit Settings............................ 23
Enabling or Disabling Program Ratings............................... 41
Creating a Custom Picture Mode......................................... 23
Locking and Unlocking Channels......................................... 41
Locking and Unlocking the Custom Picture Modes............ 24
Blocking and Unblocking Content by Rating....................... 42
Deleting a Custom Picture Mode......................................... 24
Changing the Parental Control Passcode............................ 42
1

Resetting the Content Locks................................................. 42
Adjusting the Wide Mode (Aspect Ratio)............................. 43
Controlling Other Devices with CEC..................................... 44
Turning the Power Indicator On or Off................................ 45
Using the Reset & Admin Menu . . . . . . . . . . . . . . . . . . . . . . . 45
Restoring the TV to Factory Default Settings...................... 45
Using the Guided Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . 46
Using the Info Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Using the USB Media Player.................................48
Using the USB Media Player . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Preparing your USB drive to play USB media..................... 48
Playing USB media................................................................ 48
Removing the USB drive from the TV.................................. 48
Specifications........................................................53
Limited Warranty..................................................55
Legal & Compliance..............................................56
2
1
Installing the TV
INSPECTING THE PACKAGE CONTENTS
INSTALLING THE TV
Before installing your new TV, take a moment to inspect the package
contents. Use the images below to ensure nothing is missing or
damaged.
After removing the TV from the box and inspecting the package
contents you can begin installing the TV. Your TV can be installed in
two ways:
•
On a flat surface, using the included stand
•
On a wall, using a VESA-standard wall mount (not included)
Installing the TV Stand
Your TV includes a stand designed to support the weight of the TV
and keep it from falling over. However, the TV can still fall over if:
VIZIO LED HDTV
Remote control
with batteries
TV stands
Quick Start Guides
(1 English, 1 French/Spanish)
Power cord
4 x M4 28mm
Phillips screws
PACKAGE CONTENTS
•
It is placed on an uneven, unstable, or non-level surface
•
It is pushed, pulled, or otherwise improperly moved
•
If an earthquake occurs and the TV is not properly secured.
TV ON STANDS
3
1
Installing the Stand
It is recommended that two people take part in the stand installation.
Remove any plastic wrapping from the TV and the stand.
Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to the screen,
place the TV on a soft surface such as a blanket and avoid any sharp edges.
4
1
Insert the left and right stands into the base of the TV.
Insert two (2) M4 28 mm Phillips screws (included) into the back of the TV
and tighten them using a Phillips screwdriver, to secure each stand to the TV.
When you are finished, place the TV on a stable, level surface.
5
1
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult
the information below to find the appropriate mount for your TV
model:
Installing a TV on a wall requires lifting. To prevent
injury or damage to the TV, ask someone to help you.
D43-C1
Screw Size:
Hole Pattern:
Weight w/o Stand:
M6 (not included)
200 mm (V) x 200 mm (H)
19.40 lbs
WALL MOUNT SCREW LOCATIONS
Be sure the mount you choose is capable of supporting the weight
of the TV. After you have determined that you have the correct
mount for your TV, you can begin the installation.
To install your TV on a wall:
1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, flat, stable surface. Be sure
the surface is clear of debris that can scratch or damage the
TV.
3. Remove the base by loosening and removing the screws.
4. Attach your TV and wall mount to the wall, carefully following
the instructions that came with your mount.
Use only with a UL-listed wall mount bracket rated for the
weight/load of this TV.
For some wall mounts, you may want to use cables with
right-angle connectors. This allows the TV to rest closer
to the wall.
6
2
Controls and Connections
USB - Connect a USB thumb drive to display photos.
HDMI - Connect an HDMI device.
Stereo Audio Out - Connect an RCA audio device, such as sound bar.
Optical Audio Out - Connect an optical/SPDIF audio device, such as a
home audio receiver or sound bar.
Coaxial - Connect a coaxial cable from cable, satellite, or antenna.
Component/Composite - Connect a component or composite device.
HDMI - Connect an HDMI device.
BACK PANEL
7
2
Power - Press once to turn on the TV.
Press and hold to turn off the TV
Input - Press once to access the INPUT menu.
SIDE PANEL
8
2
FRONT PANEL
REMOTE SENSOR & POWER INDICATOR
When using the remote, aim it directly at this sensor.
The power indicator flashes on when the TV turns on, then goes out after several seconds.
To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On
or Off on page 45.
FRONT PANEL
9
2
USING THE REMOTE
INPUT
Change the currently-displayed input.
A/V CONTROLS
Control USB media player.
POWER
Turn the TV on or off.
INFO
Display the info window.
CLOSED CAPTIONS
Open the closed caption menu.
MENU
Display the on-screen menu.
ARROW
Navigate the on-screen menu.
GUIDE
Display the info window.
Exit
Close the on-screen menu.
Ok
Select the highlighted menu option.
BACK
Go to the previous on-screen menu.
VOLUME UP/DOWN
Increase or decrease loudness of
the audio.
MUTE
Turn the audio off or on.
V BUTTON
Open the USB media player.
CHANNEL UP/DOWN
Change the channel.
LAST
Return to the channel last viewed.
NUMBER PAD
Manually enter a channel.
DASH
Use with number pad to manually enter
a digital sub-channel.
(For example, 18-4 or 18-5.)
WIDE
Switch the display mode.
REMOTE CONTROL
10
2
Replacing the Batteries
1. Remove the battery cover.
2. Insert two batteries into the remote control. Make sure that
the (+) and (-) symbols on the batteries match the (+) and (-)
symbols inside the battery compartment.
3. Replace the battery cover.
11
3
Connecting Your Devices
CONNECTING A DEVICE
Your TV can be used to display output from most devices.
1. Verify that your device has a video port that matches an
available port on the TV (HDMI, Component, etc.).
Cable/Satellite Box
2. Turn the TV and your device off.
3. Connect the appropriate cable (not included) to the TV and the
device.
4. Turn the TV and your device on. Set the TV’s input to match the
connection you used (HDMI-1, HDMI-2, etc.).
DVD/Blu-ray Player
HDMI CABLE
BEST
Game Console
• DIGITAL
• HD VIDEO (1080p)*
• HD AUDIO
COMPONENT CABLE
BETTER
COAXIAL CABLE
BETTER
AV CABLE
GOOD
12
• ANALOG
• HD VIDEO (1080p)*
• STEREO AUDIO
• ANALOG
• HD VIDEO (1080i)*
• STEREO AUDIO
• ANALOG
• VIDEO (480i)*
• STEREO AUDIO
* Maximum resolution
3
CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES
AV CABLE
COAXIAL CABLE
AV cables (or composite cables) are the traditional way
of connecting your devices to your TV. Video signals are
sent over the yellow connector while audio is sent over
the red and white connectors.
Coaxial cables are the traditional way of connecting
antennas and cable television signals to your TV. Coaxial
cables carry both audio and video signals through a
single connector.
• Video Resolutions up to 480i
•
HD Video Resolutions up to 1080i
• Analog Connection
•
Analog Connection
• Audio and Video Signals
•
Audio and Video Signals
Y/V
L
R
Coaxial
COMPONENT VIDEO
GOOD
BETTER
13
3
COMPONENT CABLE
HDMI CABLE
Component cables are designed to carry high definition
video signals along with additional audio connections.
Colors are delivered with color information split up
three different ways over three connectors for video
(separated into red, blue and green signals) and the left
and right audio connectors (red and white).
HDMI is the intelligent, all-digital interface that delivers
both dazzling quality and unmatched ease of use. HDMI
technology transmits crystal-clear digital video along with
multi-channel surround audio. HDMI-connected devices
have the ability to automatically adjust themselves for
optimal viewing.
• HD Video Resolutions up to 1080p
•
HD Video Resolutions up to 1080p
• Analog Connection
•
HD Audio
• Audio and Video Signals
•
Digital Connection
•
Audio and Video Signals
COMPONENT VIDEO
R
L
Pr/Cr
Pb/Cb
Y/V
HDMI
HDMI
BETTER
BEST
14
3
CONNECTING AN AUDIO DEVICE
Your TV can output sound to an audio device, such as a receiver or
sound bar.
1. Verify that your device has an audio port that matches an
available port on the TV (optical, RCA, etc.).
Home Audio Receiver
2. Turn the TV and your audio device off.
3. Connect the appropriate cable (not included) to the TV and the
device.
VIZIO Sound Bar
4. Turn the TV and your device on.
RCA CABLE
GOOD
• ANALOG STEREO CONNECTION
• 2.0 CHANNEL
OPTICAL/SPDIF CABLE
BETTER
• PCM STREAM
• DOLBY DIGITAL 5.1 CHANNEL
• DTS 5.1 CHANNEL
HDMI CABLE
• CEC 2-WAY COMMUNICATION
• 2.0-5.1 DIGITAL AUDIO
• PCM, DTS, DOLBY DIGITAL
BEST
15
3
CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES
RCA CABLE
OPTICAL/SPDIF CABLE
HDMI CABLE
AV cables (or composite cables) are the traditional
way of connecting your devices to your audio
device. Audio signals are sent over the red and
white connectors.
Optical/SPDIF cables transmit audio signals as
pulses of light through a cable made of plastic
fibers. Audio signals are digitally transmitted
between devices.
HDMI technology transmits crystal-clear digital
multi-channel surround audio through a single
HDMI cable. Audio Return Channel-enabled
(ARC) TVs allow audio to be sent over an already
connected HDMI cable, eliminating the need for
a separate audio cable. See Connecting an Audio
Device - ARC on page 17.
•
Quality Stereo Connection
• PCM Stream (Lossless)
•
2.0 Channel
• Dolby Digital 5.1 Channel
•
Analog Connection
•
Audio Signal Only
• Digital Connection
• Audio Signal Only
COMPONENT VIDEO
L
R
GOOD
Optical/SPDIF
•
CEC 2-way Communication
(Auto setup)
•
PCM, DTS, Dolby Digital
•
2.0-5.1 Scaleable Lossless
Digital Audio Connection
•
Audio and Video Signals
HDMI
DIGITAL OPTICAL AUDIO
HDMI
BETTER
BEST
16
3
CONNECTING AN AUDIO DEVICE - ARC
Without HDMI ARC
With HDMI ARC
Built-in Tuner
Built-in Tuner
Your TV
Without an HDMI ARC setup,
your TV will transmit audio
signals from the built-in
tuner and VIA apps to your
home audio receiver through
a separate audio connection.
RCA (Audio)
Your TV
HDMI
HDMI
Your Home Audio Receiver
Your Home Audio Receiver
HDMI
HDMI
Your Blu-ray Player
Your Blu-ray Player
17
With an HDMI ARC setup, the
audio connection between
your TV and home audio
receiver can be removed.
The HDMI cable will transmit
audio signal to and from
your TV with an all-digital
audio/video connection.
Completing the First-Time Setup
4. Use the Arrow buttons on the
remote to highlight your TV
source and press OK.
The first time you turn on the TV, the Setup App will guide you
through each of the steps necessary to get your TV ready for use.
Before you begin the first-time setup:
•
Your TV should be installed and the power cord should be
connected to an electrical outlet.
•
Your devices should be connected.
To complete the first-time setup:
If you have cable TV, select
whether you have a cable box or
if you connect the TV directly to
a cable from the wall.
1. Press the Power/Standby
button on the remote. The TV
powers on and the Setup App
starts.
2. Use the Arrow buttons on the
remote to highlight Home Use
and press OK.
4
5. If the TV Signal channel scan
screen appears, the TV will scan
for channels, which takes several
minutes. Use the arrow buttons
on the remote to highlight Begin
Scan and press OK.
Choose your mode.
Select Store Demo for in-store display.
Select Home Use for in-home use.
Seleccione "Home Use" para Modo de Casa o "Store Demo" para Demostración en la Tienda.
Choisissez "Home Use" pour le Mode Domicile ou "Store Demo" pour la Démo en Magasin.
Store Demo
Home Use
3. Use the Arrow buttons on
the remote to highlight your
preferred language, and then
press the OK button.
Otherwise, use the Arrow and
OK buttons on the remote to
select the input your TV source
is connected to.
(The number of inputs may vary
depending on your TV.)
6. When you are finished, the message “Your VIZIO TV is set up”
will appear.
The First-Time Setup is complete.
18
5
Using the On-Screen Menu
NAVIGATING THE ON-SCREEN MENU
Your TV features an easy-to-use on-screen menu.
To open the on-screen menu, press the MENU button on the
remote.
To open the on-screen menu, press
the MENU button on the remote.
From this menu, you can:
•
Adjust the Picture settings
•
Adjust the Audio settings
•
Set the Sleep Timer
•
Adjust the Channel settings
Picture
•
Set up Closed Captioning
Audio
•
Select input devices
•
Adjust TV settings
•
Access the Guided Setup
Use the Arrow buttons to highlight
a menu option, and press the OK
button to select that option.
VIZIO
TV SETTINGS
Wide
Timers
Channels
CC
Exit
Closed Captions
Devices
Zoom
Normal
While navigating the on-screen menu, you can press the
BACK button at any time to return to the previous menu
2D
3D The EXIT button will close the
screen.
on-screen menu.
System
ABC
Guided Setup
19
Panoramic
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
5
CHANGING THE INPUT SOURCE
CHANGING THE SCREEN ASPECT RATIO
External devices such as DVD players, Blu-ray Players, and video
game consoles can be connected to your TV. To use one of these
devices with your TV, you must first change the input source using
the Input menu.
The TV can display images in five different modes: Normal, Stretch,
Panoramic, Wide, and Zoom. Each mode displays the picture
differently.
To change the screen aspect ratio:
To change the input source:
1. Press the WIDE button on the
remote.
1. Press the INPUT button on
the remote. The Input menu is
displayed.
2. Use the Up/Down Arrow
buttons or the INPUT button on
the remote to highlight the input
you wish to view and press OK.
The selected input is displayed.
Input Name
2. Use the Arrow buttons to
highlight the aspect ratio you
wish to view and press OK.
TV
•
HDMI-1
HDMI-2
COMP
You can change the input names that appear on the
Input menu to make your devices easy to recognize. See
Renaming Devices on the Input Menu on page 38 for
more information.
20
Normal preserves the content’s
original aspect ratio. Since the 4:3
aspect ratio is not large enough
to fill the TV’s screen, black bars
are added to the left and right of
the display image.
Normal
Normal
Panoramic
Stretch
Wide
Wide
Zoom
Zoom
Note: Aspect ratio settings may
vary by Input source.
•
Stretch expands the display image to fill the screen. Images
may appear wider than intended. If you are watching
widescreen (1.85:1 or 2.35:1) content, black bars will still
appear on the top and bottom of the display image. This
option is only available when the TV is displaying a
720p/1080i source.
•
Panoramic expands the display image to fill the screen.
Images may appear wider than intended. If you are
watching widescreen (1.85:1 or 2.35:1) content, black bars
will still appear on the top and bottom of the display image.
This option is only available when the TV is displaying a
480i/480p source.
•
Wide stretches a 4:3 aspect ratio picture to the edges of
the screen. Since the picture is being stretched, the display
image may appear distorted. If the program is already
formatted for widescreen viewing (1.85:1 or 2.35:1), then
black bars will appear on the top and bottom of the display
image.
•
Zoom expands images with black bars to fit the screen.
5
ADJUSTING THE PICTURE SETTINGS
brighter, more vivid picture.
Your TV display can be adjusted to suit your preferences and viewing
conditions.
When changes are made while a preset picture mode
is selected, an asterisk appears after the name of the
picture mode. These settings can be saved as a new
custom picture mode and the preset mode can be reset
to its default settings. (see Creating a Custom Picture
Mode on page 23).
•
Game reduces throughput delays and optimizes the picture
settings for displaying game console output.
•
Computer optimizes the picture settings for displaying
computer output.
4. To manually change each of the picture settings, use the Up/
Down Arrow buttons on the remote to highlight that picture
setting, then use the Left/Right Arrow buttons to adjust the
setting:
•
Auto Brightness Control - Detects the light levels in the
room and automatically adjusts the backlight for the best
picture. Select Off, Low, Medium, or High.
•
Backlight - Adjusts the LED brightness to affect the overall
brilliance of the picture. Backlight cannot be adjusted when
Zoom
Normal some
Panoramic
starting
from
picture modes.
To adjust the picture settings:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Picture and
press OK. The PICTURE menu is
displayed.
3. Use the Arrow buttons on the
remote to highlight Picture
Mode, then use the Left/Right
Arrow buttons to change the
picture mode:
•
•
Standard sets the various
picture settings to values
that meet
ENERGY STAR® requirements.
Calibrated sets the picture
settings to values perfect for
watching TV in a brightly-lit
room.
VIZIO
PICTURE
Picture Mode
Auto Brightness Control
Backlight
Brightness
Contrast
Color
Tint
Sharpness
-
Standard
Wide
Medium
•
+
85
+
50
+
50
Exit
+
59
+
0
•
+
9
More Picture
Input
Picture Mode Edit
Color Calibration
•
Calibrated Dark sets the picture settings to values perfect
for watching TV in a dark room.
•
Vivid sets the picture settings to values that produce a
Contrast - Adjusts the white level of the picture. When this
ABC
setting is too
low, the picture may appear dark. When this
setting is too high, the picture may appear faded or washed
CC
out.Wide
If the setting
is too high or too low, detail may be
difficult to distinguish in dark or bright areas of the picture.
•
Color - Adjusts the intensity of the picture colors.
•
Tint
- Adjusts
the hue of the picture. This setting is useful in
Picture
Audio
adjusting the flesh tones in the picture. If flesh appears too
orange, reduce the level of color before adjusting tint.
•
Sharpness - Adjusts the edge sharpness of picture
elements.
It can be used to sharpen non-HD (high
Settings
Help
definition) content; however, it will not produce detail that
does not otherwise exist.
Sleep
Timer
Select from preset picture modes. Standard
picture mode meets ENERGY STAR®
requirements. For the best picture, use
Calibrated mode. To reduce video delay
(lag) when gaming, use Game mode.
Brightness - Adjusts the black level of the picture. When
this setting is too low, the picture may be too dark to
distinguish details. When this setting is too high, the picture
2D
3D
may
appear
faded or washed out.
Network
5. When you have finished adjusting the picture settings, press
BACK to adjust additional settings or EXIT.
21
5
Adjusting the More Picture Settings
•
Reduce Signal Noise - Reduces background picture noise
when viewing analog sources. The function helps to correct
"speckle" noise with a slight reduction in sharpness.Select
Off, Low, Medium, or High.
•
Reduce Block Noise - Reduces pixelation and distortion for
mpeg
files.
Select
Off, Low, Medium, or High.
Zoom
Normal
Panoramic
To adjust the More Picture settings:
1. From the PICTURE menu, use
the Arrow buttons to highlight
More Picture, and then press
OK. The MORE PICTURE menu is
displayed.
2. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press the Left/
Right Arrow buttons to change
the setting:
•
Color Temperature Adjusts the 'warmness' and
'coolness' of the white areas
of the picture. Select Cool,
Normal, or Computer.
•
Cool produces a blue-hued
picture.
•
Normal is optimized for
television viewing.
•
VIZIO
MORE PICTURE
Color Temperature
Black Detail
Clear Action
Wide
Cool
•
Medium
Off
Backlight Control
Reduce Signal Noise
Low
Reduce Block Noise
Low
•
2D
3D
Picture
Size
& Position - Picture Size increases or
decreases the vertical and horizontal size of the displayed
picture. Picture
Position adjusts the vertical and horizontal
ABC
positions of the picture to ensure the image is centered
andWide
completely
fills the screen. Use the Left/Right Arrow
Input
CC
buttons to adjust the horizontal position of the displayed
picture. Use the Up/Down Arrow buttons to adjust the
vertical position of the displayed picture. Press the OK
Sleep button when you are finished.
Picture
Audio
Exit
Game Low Latency
Picture Size & Position
Film Mode
Auto
Gamma2.2
Timer
Black Detail - Adjusts the average brightness of the picture
to compensate for large areas of brightness. Select Off,
Low, Medium, or High.
•
Clear Action - Reduces blur in scenes with fast action. Some
sensitive viewers may notice flicker. Select On or Off.
•
Backlight Control - Dynamically improves the contrast
ration of the picture by adusting the backlight. Select Off or
On.
•
Film Mode - Optimizes the picture for watching film. Select
Auto or Off.
•
Gamma - Sets the shape of the gamma curve. Use lower
Settings
values
for Help
bright room conditions and higher values when it
is dark. Select 1.8, 2.0, 2.1, 2.2, or 2.4.
Network
Computer optimizes the
picture for use as a
PC monitor.
•
Game Low Latency - Reduces video delay (lag) when
gaming. Select Off, or On. This option is not available for
devices connected using a coaxial cable.
3. When you have finished adjusting the More Picture settings,
press BACK to adjust additional settings or EXIT.
22
5
Adjusting the Picture Mode Edit Settings
Creating a Custom Picture Mode
To adjust the Picture Mode Edit settings:
Custom picture modes allow you to save a group of custom settings
for various viewing conditions and video sources.
1. From the PICTURE menu, use
the Arrow buttons to highlight
Picture Mode Edit, and then
press the OK button. The
PICTURE MODE EDIT menu is
displayed.
VIZIO
When changes are made while a preset picture mode is selected, an
asterisk
appears
after the
name of the picture mode. These settings
Wide
Zoom
Normal
Panoramic
can be saved as a new custom picture mode and the preset mode
can be reset to its default settings.
PICTURE MODE EDIT
Save Picture Mode
Lock Picture Mode
Reset Picture Mode
2. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press the Left/
Right Arrow buttons to change
the setting:
•
•
•
Exit
A2Dcustom
picture mode only applies to the input (HDMI3D
1, HDMI-2, COMP, AV, etc.) in use when it was created.
Each input can have up to six custom picture modes.
ABC
To Input
create a
custom
picture mode:
Wide
CC
Save Picture Mode - Saves
the settings for a custom
picture mode.
1. Set the Picture Mode to an
existing custom setting. See
Adjusting the Picture Settings on
Sleep
Picture
Audio
page 21.
Timer
Lock Picture Mode - Prevent/
allow changes to the
currently selected custom
picture mode. Select On or
Off.
2. From the PICTURE menu, use
the Arrow buttons to highlight
Picture ModeHelp
Edit and press
Network Settings
OK. The PICTURE MODE EDIT
menu is displayed.
Reset Picture Mode - Resets
the picture mode settings to
factory default values.
3. On the PICTURE MODE EDIT
menu, select Save Picture
Mode. The
SAVE PICTURE MODE menu is
displayed.
3. When you have finished adjusting the Picture Mode Edit
settings, press BACK to adjust additional settings or EXIT.
4. Use the Arrow buttons to
enter a custom name using the
on-screen keyboard.
5. Highlight Save and press OK.
6. Press the EXIT button to exit the
menu screens.
23
VIZIO
SAVE PICTURE MODE
<type custom name>
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z
0
1
2
3
4
5
6
7
8
9
.@#
Save
äêí
Space
5
Locking and Unlocking the Custom Picture Modes
Deleting a Custom Picture Mode
Custom picture modes can be locked with a unique PIN to prevent
accidental changes to their settings.
Custom picture modes that are no longer needed can be deleted.
Inputs assigned to a deleted custom picture mode
become assigned to the Calibrated picture mode.
To lock all custom picture modes:
1. From the PICTURE menu, use
the Arrow buttons to highlight
Picture Mode Edit and select
Lock or Unlock Picture
Mode, then press OK. The
LOCK PICTURE MODE menu is
displayed.
2. Use the Number Pad on your
remote to enter a unique 4-digit
PIN.
3. Highlight Save and then press
the OK button.
4. Press the EXIT button to exit the
menu screens.
VIZIO
LOCK PICTURE MODE
ToWide
deleteZoom
a custom
picture
mode:
Normal
Panoramic
Create a picture control PIN to
prevent change to all custom
picture modes.
1. From the PICTURE menu, use
the Arrow buttons to highlight
Picture Mode Edit and select
Exit
2D
3D
Lock or Unlock Picture Mode,
then press OK. The DELETE
ABC
PICTURE MODE
window is
displayed.
Save
Input
Wide
To delete the user created Custom 1 picture mode,
select the Delete button.
Delete
Cancel
CC
2. Use the Left/Right Arrow buttons to highlight Delete and
press OK.
3. Press the BACK button to adjust additional settings or EXIT.
Create a 4 digit passcode using the number keys on the remote.
Sleep
Timer
Picture
Audio
Network
Settings
Help
To unlock all custom picture modes:
5. From the PICTURE menu, use
the Arrow buttons to highlight
Picture Mode Edit and select
Lock or Unlock Picture
Mode, then press OK. The
LOCK PICTURE MODE menu is
displayed.
6. Use the Number Pad on your remote to enter your 4-digit PIN.
7. Make any desired changes to the picture modes.
8. To relock picture modes, you must create a new 4-digit PIN.
24
5
Adjusting the Color Calibration Settings
•
Color Calibration Settings allow you to make precise adjustments to
the picture and to create picture modes to save groups of picture
settings.
The Color Tuner, 11 Point White Balance, and test
patterns allow technicians to manually calibrate the TV.
Calibration requires specialized training, an input with
precisely set colors, and a specialized light meter.
Reset Color Tuner - Resets the color tuner settings for the
current color temperature mode.
•
If the current picture mode is a pre-set, the color
temperature is reset for all pre-set picture modes using
the current color temperature mode. It does not affect
saved custom picture modes.
•
If the current picture mode is a saved custom picture
mode, the color temperature only reset for that custom
picture modes. It does not affect pre-set picture modes
or other custom picture modes.
To adjust the color calibra picture settings:
For example, suppose that:
1. From the PICTURE menu, use
the Arrow buttons to highlight
Color Calibration and press
the OK button. The COLOR
CALIBRATION menu is displayed.
•
You have created two custom picture modes: “My Picture
Settings” and “Oliver.” They both use the Normal color
temperature, but you have adjusted it for each of the
Zoom
Normal
Panoramic
modes.
•
You have changed the Color Tuner settings for the
Normal color temperature while in the Calibrated picture
mode.
2D
3D
2. Use the Arrow buttons to
highlight the setting you wish to
adjust, then press the OK button
to change the setting:
•
VIZIO
COLOR CALIBRATION
Wide
Picture Mode*
Color Temperature*
Color Tuner
Reset Color Tuner
Exit
Picture Mode - Not directly
selectable (reference only).
Changes to Hue,
Saturation, and Brightness are
saved here and indicated with
an asterisk (*).
•
Color Temperature - Not directly
selectable (reference only). Changes to Offset and Gain are
saved here and indicated with an asterisk (*).
•
Color Tuner - Adjust the HSB color, RGB offsets, and
11-point white balance, and display calibration test
patterns.
Input
So, you have “My Picture Settings” with a modified Normal
color temperature,
“Oliver” with different changes to the
ABC
Normal color temperature, and a third set of changes to the
Normal color temperature that apply to all of the pre-set
Wide
CC
picture modes.
The Calibrated and Calilbrated Dark picture modes both
use the Normal color temperature. If Calibrated is the
Sleep current picture mode when the Normal color temperature
Picture
Audio
Timer
is reset, the change affects both of these picture modes,
but does not undo the changes to the color temperature for
the “My Picture Settings” or “Oliver” custom picture modes.
If “My
Picture
Settings
Help Settings is the current picture mode when the
Normal color temperature is reset, the change only affects
“My Picture Settings” picture mode. The color temperature
changes to the “Oliver,” Calibrated, and Calibrated Dark
picture modes stay as they are.
Network
25
5
Adjusting the Color Tuner Settings
The Color Tuner settings allow you to adjust the Hue, Saturation,
and Brightness (HSB) color and 11 point white balance, turn color
channels off for testing, and display color bar, flat, and ramp test
patterns.
To turn color channels off and on:
To adjust the HSB color settings:
2. Use the Arrow buttons to highlight Color Tuner, and then
press the OK button. The Color Tuner menu is displayed ..
1. From the PICTURE menu, use the Arrow buttons to highlight
Color Calibration and press the OK button. The COLOR
CALIBRATION menu is displayed.
1. From the PICTURE menu, use the Arrow buttons to highlight
Color Calibration and press the OK button. The COLOR
CALIBRATION menu is displayed.
Color Tuner
Color Tuner
Green
Blue
Cyan
Magenta
Yellow
Hue
0
0
0
0
25
-14
Saturation
-1
5
-4
0
-2
0
Brightness
0
0
0
-24
0
-22
Offset
0
0
0
Gain
0
0
0
Green
Blue
Cyan
Magenta
Yellow
0
0
0
0
25
-14
Saturation
-1
5
-4
0
-2
0
Brightness
-24
0
-22
0
0
0
Offset
0
0
0
Gain
0
0
0
Hue
2. Use the Arrow buttons to highlight Color Tuner, and press the
OK button. The Color Tuner menu is displayed.
Red
Red
3. Use the Arrow buttons on the remote to highlight Red, Green,
or Blue.
4. Press the OK button to turn the color channel off or on. An X
appears over a color channel that has been turned off.
5. Use the Arrow buttons to highlight another color channel to
turn off or on. Only two color channels can be turned off at the
same time.
3. Use the Arrow buttons on the remote to highlight the Hue,
Saturation, Brightness, (these 3 adjust the color) Offset, or
Gain (these two adjust the color temperature) of the color you
wish to adjust. Press the OK button.
6. When you are finished with the color channels, press the BACK
button to adjust additional settings or EXIT.
4. Use the Left/Right Arrow buttons to adjust the value. When
you are finished press the OK button to save the setting.
5. When you have finished adjusting the Color Tuner settings,
press the BACK button to adjust additional settings or EXIT.
Changes to Hue, Saturation, and Brightness are indicated with
an asterisk (*) on the Picture Mode setting.
Changes to Offset and Gain are indicated with an asterisk (*). on
the Color Temperature setting.
26
5
To adjust the 11 Point White Balance settings:
To show or hide the Color Bar Test Pattern:
1. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the 11 Point White Balance menu is displayed.
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons
to highlight Color Tuner, and then press the Left/Right Arrow
buttons until the SMPTE Test Pattern menu is displayed.
11 Point White Balance
Gain
Red
Green
Blue
5%
0
0
0
Color Bar Test Pattern
Off
2. Use the Arrow buttons on the remote to highlight Off. Use the
Left/Right Arrow buttons to highlight On to show the Color
Bar.
—or—
2. Use the Arrow buttons on the remote to highlight the Gain
and Color values you wish to adjust. Press the OK button and
use the Left/Right Arrow buttons to adjust the value. When
you are finished press the OK button to save the setting.
To hide the Color Bar Test Pattern, use the Left/Right Arrow
buttons to highlight Off.
3. When you are finished, press the BACK button to adjust
additional settings or EXIT.
3. When you are finished, press the BACK button to adjust
additional settings or EXIT.
All changes here are saved to Color Temperature.
27
5
To show or hide the Flat Test Pattern:
To show or hide the Ramp Test Pattern:
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons
to highlight Color Tuner, and then press the Left/Right Arrow
buttons until the Flat Test Pattern menu is displayed.
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the Ramp Test Pattern menu is displayed.
Flat Test Pattern
Ramp Test Pattern
Off
Off
2. Use the Arrow buttons on the remote to highlight Off. Use the
Left/Right Arrow buttons to select the color for the ramp test
pattern. Selecting a color immediately shows that color ramp.
2. Use the Arrow buttons on the remote to highlight Off. Use the
Left/Right Arrow buttons to select the percentage brightness
for the flat test pattern. Selecting a percentage immediately
shows the flat pattern at that brightness.
—or—
—or—
To hide the Ramp Test Pattern, use the Left/Right Arrow
buttons to highlight Off.
To disable the Flat Test Pattern, use the Left/Right Arrow
buttons to highlight Off.
3. When you are finished, press the BACK button to adjust
additional settings or EXIT.
3. When you are finished, press the BACK button to adjust
additional settings or EXIT.
28
5
ADJUSTING THE AUDIO SETTINGS
•
Balance - Adjusts the loudness of the audio output from
the left and right speakers.
To adjust the audio settings:
•
Lip Sync - Adjusts the synchronization between the display
image and the accompanying audio track.
•
Digital Audio Out - Changes the type of processing for
HDMI ARC or optical output when connected to a home
Zoom
Normal
Panoramic
theater audio system. Select PCM or Bitstream.
1. Press the MENU button on the
remote. The on-screen menu
is displayed.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The AUDIO menu
is displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change
the setting:
•
VIZIO
AUDIO
TV Speakers
On
Surround Sound
On
Volume Leveling
Balance
Lip Sync
Wide
On
-
+
0
+
0
Digital Audio Out
PCM
Analog Audio Out
Fixed
Exit
•
Equalizer
Delete Audio Mode
Input
TV Speakers - Turns the
built-in speakers on or off.
Sleep
Timer
•
When the TV speakers are set to On, DTS signals cannot
be passed through digital audio outputs.
Network
•
•
Surround Sound - Surround sound uses DTS TruSurround™
to deliver an immersive surround sound experience from
the TV’s internal speakers. TruSurround completes the
entertainment experience by providing deep, rich bass
and by delivering crisp details and clear, intelligible dialog.
Select On or Off.
You must select Bitstream for audio with more than
two channels
(3.0, 5.0, or 5.1, for example).
2D
3D
ABC
Analog Audio
Out - Sets the volume control properties for
the 3.5mm (headphone jack) connector when connected
to Wide
a home CC
theater audio system. Select Variable to control
the headphones’ volume from the TV’s volume controls, or
select Fixed to control the headphones’ volume from your
home theater system controls. (Some external speakers can
Picture
Audio
also
be connected
to the 3.5mm connector.)
Equalizer - Adjusts the boost or attenuation of different
frequencies using either preset or custom settings. See
Changing the Equalizer Settings on page 30.
Settings
Help
Delete Audio Mode - Deletes a custom audio mode created
using the Equalizer Settings. See Deleting the Custom Audio
Mode on page 30.
This option is cannot be selected if no custom audio
mode has been created.
4. When you have finished adjusting the audio settings, press the
BACK button to adjust additional settings or EXIT.
• Volume Leveling - Volume leveling uses DTS TruVolume™
to maintain consistent volume levels during transitions
between program content, AV formats, and input sources.
Select On or Off. In a few cases, volume leveling may
artificially suppress volume increases, making it difficult to
hear dialog or flattening sudden noises. If this occurs, turn
volume leveling off.
29
5
Changing the Equalizer Settings
Deleting the Custom Audio Mode
The graphic equalizer has several pre-set modes and allows you to
create one custom mode.
To delete the custom audio mode that has been created:
To select a pre-set audio mode:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight Audio and
press OK. The AUDIO menu is displayed.
2. Use the Arrow buttons on the remote to highlight Audio and
press OK. The AUDIO menu is displayed.
3. Use the Arrow buttons to highlight Delete Audio Mode and
press OK. The TV displays, “To delete the user created custom
audio mode, select the Delete button.”
3. Use the Arrow buttons to highlight Equalizer and press OK.
The Audio Mode and equalizer settings screen appears.
4. Highlight Delete and press OK.
4. Use the Left and Right Arrow buttons to select an audio mode
(Flat, Dynamic, Center, Bass Boost, or Bright). The equalizer
bars change to reflect the mode.
5. Press the BACK button to adjust additional settings or EXIT.
5. Press the BACK button to adjust additional settings or EXIT.
To create, modify, or replace the single custom equalizer setting:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight Audio and
press OK. The AUDIO menu is displayed.
3. Use the Arrow buttons to highlight Equalizer and press OK.
The Audio Mode and equalizer settings screen appears.
4. Use the Left and Right Arrow buttons to select any audio
mode as a starting point.
5. Use the Arrow buttons to highlight a frequency and then press
OK.
6. Use the Up and Down Arrow buttons to adjust the boost (up)
and attenuation (down) for the frequency.
7. Use the Left and Right Arrow buttons to select another
frequency, if desired, and adjust it.
8. Press the BACK button to adjust additional settings or EXIT.
30
5
SETTING TIMERS
Setting the Auto Power Off Feature
This TV has several timers to save energy and to turn off when you
go to sleep.
To help save energy, your TV is set by default to turn off after
10 minutes without a video or audio signal. This feature can be
deactivated.
Setting the Sleep Timer
To set the Auto Power Off feature:
When activated, the TV’s sleep timer will turn the TV off after a set
period of time.
1. From the TIMERS menu, use the Up/Down Arrow buttons on
the remote to highlight Auto Power Off.
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Left/Right Arrow buttons on the remote to change
whether the TV will turn off. If you don’t want the TV to turn
off when
there
is no
signal, change the setting to Off or 10
Wide
Zoom
Normal
Panoramic
minutes.
2. Use the Arrow buttons on the
remote to highlight Timers and
press OK. The TIMERS menu is
displayed.
VIZIO
TIMERS
Sleep Timer
Auto Power Off
Off
10 minutes
3. When you have finished setting the auto power off time, press
the BACK button to adjust additional settings or EXIT.
Exit
3. Use the Left/Right Arrow
buttons on the remote to
highlight the period of time after
which you want the TV to go to
sleep: 30, 60, 90, 120, or 180
minutes. If you don’t want the
sleep timer to activate, change
the setting to Off.
2D
3D
ABC
4. When you have finished setting
the sleep timer, press the BACK
button to adjust additional
settings or EXIT.
31
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
5
SETTING UP CHANNELS
Selecting a Channel Source
1. On the remote control, press Input and use the Arrow button
to highlight TV (antenna icon), then press OK.
You can use the TV’s Channels menu to:
•
Select a Channel Source
•
Find channels
•
Perform a partial channel scan
Channel Source
•
Manually add channels
Find Channels
•
Select channels to skip
Partial Channel Search
•
Select language for analog
and digital channels
Add Analog Channel
Finding Channels
Skip Channel
The TV may need to scan for channels before it can display programs
and their associated information. A channel scan is required for
ABC
free over-the-air channels
(using an antenna) and cable channels
from an out-of-the-wall connection (without a cable box). Moving
Wide
CC
theInput
TV to an
area with
different channels requires the TV to scan for
channels again.
2. Press the MENU button, select Channels and press OK. The
CHANNELS menu is displayed.
VIZIO
CHANNELS
Analog Audio
Digital Language
Zoom
Normal
Panoramic
3.Wide
On the
CHANNELS
menu, highlight Channel Source and using
the left/right Arrow buttons to select either Antenna or Cable.
Antenna
Exit
Stereo
English
2D
3D
To perform an Auto Channel Scan:
Sleep
Audio
1. Timer
From Picture
the CHANNELS
menu,
highlight Find Channels and
press OK. The auto channel scan
begins.
Network
Settings
Help
2. Wait until the channel scan is
100% complete. Highlight Done
and press OK.
3. Press the EXIT button on the
remote.
VIZIO
VIZIO
FIND CHANNELS
Channels Found
Digital: 0
Analog: 19
18%
Complete
Cancel
If the channel scan is cancelled,
the channels that were already
discovered are retained. A new
channel scan will clear all channels.
Cancel the channel scan.
32
5
Adding New Channels
To add a single new analog channel:
Occasionally, you may need to add a new range of channels or add
a new analog channel. You can do this by using the Partial Channel
Scan and Add Analog Channel options. This is quicker than scanning
all possible channels.
1. From the CHANNELS menu,
highlight Add Analog Channel
and press OK. The ADD ANALOG
CHANNEL menu is displayed.
To add a range of new channels:
2. Highlight Enter Channel # and
use the Number Pad on the
remote to type the number of
the channel to be added.
1. From the CHANNELS menu, highlight Partial Channel Search,
and press OK. The PARTIAL CHANNEL SEARCH menu is
displayed.
3. Highlight Add Channel and
press OK. The TV scans for the
channel.
2. Highlight Scan Mode and select the type of channel you are
adding: Analog, Digital, or Analog/Digital.
3. Highlight From Channel and type the channel where you want
to begin the scan. (Use the left Arrow button to backspace.
Use the Number Pad on the remote to type the channel.)
4. When the TV is done scanning
for the channel, press the EXIT
button on the remote.
4. Highlight To Channel and enter the channel where you want to
end the scan. (Use the left Arrow button to backspace. Use the
Number Pad on the remote to enter the channel.)
5. Highlight Start and press OK. The partial channel search
begins.
6. Wait until the partial channel search is 100% complete.
Highlight Done and press OK.
7. Press the EXIT button on the remote.
33
VIZIO
ADD ANALOG CHANNEL
Enter Channel #
Add Channel
5
Skipping Channels
After a channel scan is completed, you may find that some channels
are too weak to watch comfortably. There may also be some
channels you do not want to view. You can remove these channels
from the TV’s memory with the Skip Channel feature.
Channels that have been removed with the Skip Channel
feature can still be viewed if the channel is entered
using the Number Pad. If you wish to completely block
a channel from being viewed, use the parental controls.
See Locking and Unlocking Channels on page 41.
To remove a channel:
1. From the CHANNELS menu,
highlight Skip Channel, and
press OK. The SKIP CHANNEL
menu is displayed.
2. For each channel you wish to
remove, use the Up/Down
Arrow buttons on the remote to
highlight the channel and press
OK. A P appears to the right of
each channel you select.
VIZIO
SKIP CHANNEL
1
Test 0
1
Test 1
P
1-2
Test 2
P
2
Test 3
2-2
Test 4
2-3
Test 5
P
Wide
Zoom
Normal
Exit
2D
3D
ABC
3. When you have selected all
of the channels you wish to
remove, press BACK to adjust
additional settings or EXIT.
34
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
Panoramic
5
LISTENING TO ALTERNATE AUDIO
Changing the Digital Audio Language
Some digital over-the-air (free), cable, and satellite channels
broadcast programs in more than one language. The TV’s Digital
Audio feature allows you to listen to audio in alternate languages.
Changing the Analog Audio Language
Some analog over-the-air (free) and cable channels broadcast
programs in more than one language. The TV’s Analog Audio
feature allows you to listen to audio in an alternate language using
Secondary Audio Programming (SAP).
Not all programs are broadcast in alternate languages.
The Digital Audio Language feature only works when
the program being viewed is being broadcast in the
language you select.
Not all programs are broadcast in SAP. The Analog
Audio Language feature only works when the program
being viewed is being broadcast with Secondary Audio
Programming.
1. From the CHANNELS menu,
highlight Digital Language
and press OK. The DIGITAL
LANGUAGE menu is displayed.
To use the Analog Audio feature:
1. From the CHANNELS menu,
highlight Analog Audio and
press OK. The ANALOG AUDIO
menu is displayed.
2. Select Stereo, SAP (secondary
audio programming), or Mono.
Press OK.
2. Select your preferred language:
English, Français, or Español
and press OK.
VIZIO
ANALOG AUDIO
Stereo
Wide
Zoom
Normal
Exit
2D
3D
Panoramic
3. Press BACK to adjust additional
settings or EXIT.
SAP
Mono
3. Press BACK to adjust additional
settings or EXIT.
ABC
35
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
VIZIO
DIGITAL LANGUAGE
English
Español
Français
5
SETTING UP CLOSED CAPTIONING
Changing the Appearance of Digital Closed Captions
Digital closed captions can be displayed according to your
preference. See the diagram on the next page for an explanation of
the parts of the closed caption area.
Your TV can display closed captions for programs that include them.
Closed captions display a transcription of a program’s dialogue.
To change the appearance of digital closed captions:
If the program you are viewing is not being broadcast
with closed captions, the TV will not display them.
1. From the CLOSED CAPTIONS
menu, use the Arrow buttons to
highlight Digital Style and press
OK.
The Closed Captions menu does not appear when an
HDMI input is selected.
2. Use the Left/Right Arrow
buttons on the remote to
select Custom and press OK.
The DIGITAL STYLE menu is
displayed.
To activate or deactivate closed captions:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Closed
Captions and press OK. The
CLOSED CAPTIONS menu is
displayed.
VIZIO
3. Use the Up/Down Arrow
buttons
remote
to
Wide
Zoomon the
Normal
Panoramic
highlight the setting you wish to
change, then use the Left/Right
Arrow buttons to change the
setting:
Exit
2D
3D
CLOSED CAPTIONS
Closed Captions
Off
Analog Closed Captions
CC1
Digital Closed Captions
CS1
Digital Style
•
3. Use the Arrow buttons on the
remote to highlight Closed
Captions and then use the Left/
Right Arrow buttons to select
On or Off.
Input
Caption Style - Choose
As Broadcast
to keep
ABC
default settings or Custom
to manually change each
Wide
CC
setting.
VIZIO
DIGITAL STYLE
Custom
Caption Style
Text Style
As Broadcast
Large
Text Size
Green
Text Color
Text Opacity
As Broadcast
Text Edges
As Broadcast
Text Edges Color
As Broadcast
Black
Background Color
Background Opacity
As Broadcast
Red
Window Color
Window Opacity
As Broadcast
Select As Braodcase to display digital captions
as sent by the caption provider. The color and
size for the caption text and background can
still be customized.
•
Text Style - Change the
font used for the closed
Sleep captioning text.
Picture
Audio
4. Use the Arrow buttons on
the remote to highlight either
Analog or Digital Closed
Captions.
Timer
5. Use the Left/Right Arrow
buttons on the remote to select
the caption channel you wish to
display, then press BACK to adjust
additional settings or EXIT.
•
Text Size - Make the text larger or smaller.
•
Text Color - Change the color of the text.
•
Text Opacity - Change the transparency of the text.
•
Text Edges - Change the effects at the edges of the text,
such as raising the edges or adding drop shadows.
Network
36
Settings
Help
5
•
Text Edges Color - Change the color of the text edge
effects.
•
Background Color - Change the color of the background
directly behind the text.
•
Background Opacity - Change the transparency of the
background directly behind the text.
•
Window Color - Change the color of the closed captioning
box.
•
Window Opacity - Change the transparency of the closed
captioning box.
Typical choices include:
•
Opaque background, transparent window—Only a strip of
background appears behind the text, expanding as the text
appears. This is the typical "As Broadcast" mode.
•
Opaque background and window in the same color—When
text appears, the entire line fills with color at once.
In the example below, the closed caption text is green, the
background is black, and the window is red.
4. When you are satisfied with the appearance of the closed
captions, press the EXIT button on the remote.
Text
Background
CLOSED CAPTION TEXT SAMPLE
Window
37
CLOSED CAPTIONS SCREEN LAYOUT
5
RENAMING DEVICES ON THE INPUT MENU
Inputs can be renamed to make them easier to recognize on the
Input menu (see Changing the Input Source on page 20). For
example, if you have a DVD player connected to the Component
input, you can rename that input to display “DVD Player.”
Input Port
To change the name of an input:
VIZIO
1. Press the MENU button on the remote. The on-screen menu is
displayed.
NAME INPUT
HDMI-1
2. Use the Arrow buttons on the remote to highlight Devices and
press the OK button. The DEVICES menu is displayed.
Wide
Zoom
Input
Name
DVD
Custom Name
DVD_
Exit
3. Highlight the input port that you want to name and press OK.
a
4. To use a preset input name:
a. Highlight the Input Port row and press OK.
b
c
d
e
f
g
h
j
k
l
m
n
o
p
q
r
t
u
v
w
x
y
z
0
1
2
3
4
5
6
7
8
9
äêí
Space
2D
3D
i
s
.@#
b. Highlight the input name you want to use (HDMI-1, Blu-ray,
Cable Box, Computer, DVD, DVR, Game, or Satellite) and
press OK.
—or—
Normal
ABC
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
OK
Cancel
To enter a custom name:
Select the input name from a list of
common device names (Blu-ray, Cable
Box, DVD, etc).
a. Enter your custom name using the on-screen keyboard.
b. Highlight OK and press OK.
c. The Input Name changes to show the custom name that
you created.
5. When you have finished naming your input, press the BACK
button to adjust additional settings or EXIT.
38
Panora
5
CHANGING THE TV SETTINGS
Viewing System Information
To view a summary of the TV settings:
Using the System menu, you can:
View system information
•
Change the on-screen menu
language
System Information
•
Set the time zone and local
settings
Time & Local Settings
•
SYSTEM
Menu Language
Wide
•
Change the Wide settings
CEC
•
Adjust the California Energy
Commission (CEC) settings
Reset & Admin
Adjust when the power
indicator is illuminated
•
Reset the TV settings and set
up administrative controls
Wide
English
Power Indicator
Zoom
Normal
Panoramic
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
3. Highlight System Information and press OK.
Parental Controls
Set up parental controls
•
1. Press the MENU button on the remote. The on-screen menu is
displayed.
VIZIO
•
Exit
2D
3D
4. Use the Up/Down Arrow buttons to scroll through the system
information.
Off
ABC
Input
System information is used verify settings and the
Wide
CC
firmware
version.
5. When you are finished reviewing the system information, press
the BACK
button
to view or change additional settings or EXIT.
Sleep
Picture
Audio
Timer
View status information for the TV and
current input.
Network
39
Settings
Help
5
Changing the On-Screen Menu Language
Setting the Time and Local Settings
Your TV can display the on-screen menu in different languages.
When your TV signal come from an antenna, your TV receives time
information as part of the broadcast signal. The time is displayed as
part of the information when you press the INFO button. However,
you need to set your time zone and Daylight Saving Time state to
ensure that the correct time is displayed.
To change the on-screen menu language:
1. Press the button on the
remote. The on-screen menu is
displayed.
2. Use the buttons on the remote
to highlight and press . The
SYSTEM menu is displayed.
VIZIO
MENU LANGUAGE
ToWide
set the
TV’s Normal
time zone
and whether Daylight Saving Time is in
Zoom
Panoramic
effect:
English
Español
1. Press the MENU button on the
remote. The on-screen menu is
Exit
2D
3D
displayed.
Français
3. Use the buttons on the remote
to highlight and press . The
MENU LANGUAGE menu is
displayed.
2. Use the Arrow buttons on the
ABC
remote to highlight System and
press OK. The SYSTEM menu is
Input
Wide
CC
displayed.
4. Highlight your preferred
language (, , or ) and press . All
screens will now be displayed in
the selected language.
VIZIO
Nov 06, 2014 12:44 PM
Time Zone
Daylight Saving Time
Pacific
Off
3. Use the Arrow buttons on the
remote to highlight Time & Local
Sleep
Picture
Audio
Settings
and press
OK. The
Timer
menu headed by the local date
and time is displayed.
5. Press the button to change
additional settings or .
Settings
4.Network
Highlight
TimeHelp
Zone and press
OK. The TIME ZONE menu is
displayed.
5. Highlight your time zone and press OK.
6. Highlight Daylight Saving Time and press OK. The DAYLIGHT
SAVING TIME menu is displayed. Choose On if it is currently
Daylight Saving Time, Off if it is Standard Time.
7. Press the EXIT button on the remote.
You'll need to change the Daylight Saving Time setting at
the start and end of Daylight Saving time.
40
5
Using the Parental Controls
Enabling or Disabling Program Ratings
The TV’s parental controls allow you to prevent the TV from
displaying certain channels or programs without a password.
To manage program content according to its rating, you must
enable the Program Rating feature.
The Parental Controls menu only appears when:
To enable or disable the Program Rating feature:
•
You are using the tuner to receive your TV signals, such as
when you are using an antenna for Over-the-Air signals or
when connected to cable TV directly from the wall (no cable
box).
From the PARENTAL CONTROLS menu, highlight Locks and use the
left/right Arrow buttons to select On (enable) or Off (disable).
•
You have a device connected using a composite video cable
or a coaxial cable, such as a VCR, satellite or cable box, or
DVR.
When a channel is locked, it will be inaccessible. Locking a channel
is a good way to prevent children from viewing inappropriate
material.
Locking and Unlocking Channels
Accessing the Parental Controls Menu
To lock or unlock a channel:
To access the Parental Controls menu:
1. From the PARENTAL CONTROLS menu, highlight Channel
Locks and press OK. The CHANNEL LOCKS menu is displayed.
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Highlight the channel you want to lock or unlock and press OK.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
3. When a channel is locked, the Lock icon appears locked.
The channel is not accessible unless the parental passcode is
entered.
3. Use the Arrow buttons on the remote to highlight Parental
Controls and press OK.
4. When a channel is unlocked, the Lock icon appears unlocked.
The channel is accessible.
4. Enter your parental passcode. If you have not set a passcode,
enter the default, 0000. The PARENTAL CONTROLS menu is
displayed.
To set a custom parental passcode, see Changing the
Parental Control Passcode on page 42.
41
5
Changing the Parental Control Passcode
Blocking and Unblocking Content by Rating
A channel may sometimes broadcast programs that are meant for
children, and at other times broadcast programs that are meant
for mature audiences. You may not want to block the channel
completely using a channel lock, but you may wish to block certain
programs from being viewed.
If you use the parental controls, you should change the passcode to
prevent children from accessing inappropriate material.
To change the parental control passcode:
1. From the PARENTAL CONTROLS menu, highlight Change PIN
and press OK. The CHANGE PIN menu is displayed.
When this is the case, you can use the TV’s Rating Block feature to
block content based on its rating.
2. In the New PIN field, use the Number Pad on the remote to
enter your new 4-digit parental control passcode.
For a list of content ratings and their definitions, visit
www.tvguidelines.org.
3. In the Confirm PIN field, use the Number Pad on the remote
to re-enter your new 4-digit parental control passcode.
To block or unblock content by its rating:
4. Write down your new parental control passcode and save it in
a secure location.
1. From the PARENTAL CONTROLS menu, highlight the content
type you want to adjust and press OK:
USA TV - USA television program broadcasts.
USA MOVIE - USA movie broadcasts.
Canadian English - Canadian English television program
broadcasts.
Canadian French - Canadian French television program
broadcasts.
5. Press the EXIT button on the remote.
Resetting the Content Locks
To reset the content locks to the factory-default settings:
1. From the PARENTAL CONTROLS menu, highlight Reset Locks
and press OK. The TV displays, “Select Reset to restore Parental
Controls to factory defaults.”
2. For each rating type you want to block or unblock, use the
Up/Down and Left/Right Arrow buttons on the remote to
highlight the rating type and press OK.
2. Highlight Reset and press OK.
3. When the rating type is blocked, the Lock icon appears
locked. Content with this rating and all higher ratings cannot
be viewed.
4. When the rating type is unblocked, the Lock icon appears
unlocked. Content with this rating and all lower ratings can be
viewed.
If you want to block all unrated content, highlight Block
Unrated Shows and use the Arrow buttons on the remote to
select On.
5. When you are finished adjusting the rating level blocks, press
the EXIT button on the remote.
42
5
Adjusting the Wide Mode (Aspect Ratio)
•
Wide stretches a 4:3 aspect ratio picture to the edges of
the screen. Since the picture is being stretched, the display
image may appear distorted. If the program is already
formatted for widescreen viewing (1.85:1 or 2.35:1), then
black bars will appear on the top and bottom of the display
image.
•
Zoom expands images with black bars to fit the screen.
The TV can display images in five different modes: Normal, Stretch,
Panoramic, Wide, and Zoom. Each mode displays the picture
differently.
To change the screen aspect ratio:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight System and
press OK. The SYSTEM menu is
displayed.
3. Use the Arrow buttons on the
remote to highlight Wide and
press OK. The wide mode menu
appears at the top of the screen.
Normal
Normal
Panoramic
Stretch
Wide
Wide
Zoom
Zoom
Note: Aspect ratio settings may
vary by Input source.
4. Use the Arrow buttons to highlight the aspect ratio you wish to
use and the press OK.
•
Normal preserves the content’s original aspect ratio. Since
the 4:3 aspect ratio is not large enough to fill the TV’s
screen, black bars are added to the left and right of the
display image.
•
Stretch expands the display image to fill the screen. Images
may appear wider than intended. If you are watching
widescreen (1.85:1 or 2.35:1) content, black bars will still
appear on the top and bottom of the display image. This
option is only available when the TV is displaying a
720p/1080i source.
•
Panoramic expands the display image to fill the width of
the screen. Images may appear wider than intended. If
you are watching widescreen (1.85:1 or 2.35:1) content,
black bars will still appear on the top and bottom of the
display image. This option is only available when the TV is
displaying a 480i/480p source.
43
5
Controlling Other Devices with CEC
To begin device discovery:
The CEC function on your TV enables you to control devices
connected to the HDMI (ARC) input with the included remote,
without any programming. Using CEC, your VIZIO TV remote can
control:
•
Your TV begins looking for CEC devices connected to all of its
HDMI inputs. When discovery is complete:
• Power on/off
• Volume
• Mute
Not all HDMI devices support CEC. See your device’s
user manual for details.
To enable, disable, or adjust CEC settings:
1. Set up your audio device and connect it to the HDMI-1 (HDMI
ARC) input on the TV.
2. On your audio device, select the HDMI ARC input.
3. Press the MENU button on the remote. The on-screen menu is
displayed.
4. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
5. Use the Arrow buttons on the remote to highlight CEC and
press OK. The CEC Settings menu is displayed.
6. Highlight CEC and press OK. Select a setting and then press OK.
•
CEC Function - To use CEC, you must select On.
•
System Audio Control - To control your device’s audio
using the TV’s remote control, select On.
•
Device Discovery - To determine if your device is
connected and supports CEC, select Device Discovery and
then press OK.
From the CEC menu, highlight Device Discovery and press
OK.
7. Press the EXIT button on the remote.
44
•
The CEC-compatible devices are listed below Device
Discovery.
•
The names of these devices now appear on the Input
menu.
•
If an audio device was discovered, the TV's speakers are
turned off.
•
The VIZIO TV remote controls an attached VIZIO sound
bar or other audio system.
5
USING THE RESET & ADMIN MENU
Turning the Power Indicator On or Off
The Power Indicator on the front of your TV normally does not glow
when the TV is on. You can change this setting if you prefer the light
to be on.
Restoring the TV to Factory Default Settings
All of the on-screen menu settings can be reset to the factory default
settings.
To turn the Power Indicator Light on or off:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
If you restore the TV to the factory default settings, all
changes you have made to the settings will be lost!
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
To restore the TV to its factory default settings:
3. Highlight Power Indicator and press OK. The POWER
INDICATOR menu is displayed.
1. Press the MENU button on the remote. The on-screen menu is
displayed.
4. Use the Up/Down Arrow buttons to select On or Off, then
press OK.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
3. Highlight Reset & Admin and press OK. The RESET & ADMIN
menu is displayed.
4. Highlight Reset TV to Factory Defaults and press OK.
If you have changed the default parental control passcode,
type it now.
The TV displays, “Select Reset to restore all TV settings to
factory defaults.”
5. Highlight Reset and press OK.
6. Wait for the TV to turn off. The TV will turn back on shortly
afterward and the Setup App will begin.
7. To view a demonstration of TV functions on start-up, select
Store Demo > On.
45
5
USING THE GUIDED SETUP MENU
The TV’s Setup App can be used to easily set up channels on the TV.
To use guided setup:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Highlight Guided Setup and
press OK. The GUIDED SETUP
menu is displayed.
VIZIO
GUIDED SETUP
Channel Setup
3. Highlight Channel Setup and
press OK:
Wide
Zoom
Normal
Exit
2D
3D
ABC
4. Follow the on-screen
instructions. When finished,
press the BACK button to
change additional settings or
EXIT.
46
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
Panoramic
5
USING THE INFO WINDOW
The Info Window can be displayed by pressing the INFO or GUIDE
button on the remote:
•
Press the INFO or GUIDE button one time to display
channel, input, and display information.
•
Press the INFO or GUIDE button two times to display the
program title, program rating, audio information, and the
start and end times of the program.
Display Information
Channel/Input Information
28-1
KCET-HD
1080p Oliver’s Holiday Surprise
TV-PG-V
6:15pm
Normal
Dolby Digital+ Stereo
11:00AM - 12:00PM
Oliver wakes up one morning only to discover that his pals are missing. In this
hour-long holiday special, Oliver goes on a journey in search of his pals. Who
knows what he’ll encounter on the way?
Program Description
Program Title/Rating Information
DIGITAL EPISODE GUIDE & INFO WINDOW
47
6
Using the USB Media Player
USING THE USB MEDIA PLAYER
Playing USB media
To play your USB media:
The USB Media Player allows you to connect a USB thumb drive to
your TV and view photos.
1. Connect your USB thumb drive to the USB port on the side of
the TV.
USB PORT
2. Use the Arrow buttons to highlight Yes and press the OK.
If the dialog box disappears, press the V button on the
remote to go the next step.
3. Use the Arrow buttons to highlight your USB device in the list
and press OK.
4. Use the Arrow buttons to highlight Photo and press OK.
5. Use the Arrow buttons to highlight the photo you want to
display. Press OK. The photo displays.
You can display your photos in fullscreen. Select the
photo, press OK, then highlight Fullscreen and press
OK.
Preparing your USB drive to play USB media
To play USB media, you must first save your files on a USB thumb
drive:
•
The USB thumb drive must be formatted as FAT32.
•
Files on the USB thumb drive must end in a supported file
extension (.jpg or .jpeg).
•
The USB media player is not designed to play media
from external hard drives, MP3 players, cameras, or
smartphones.
Removing the USB drive from the TV
Do not remove the USB thumb drive while the TV is on.
Doing so may damage the drive.
To safely remove your USB drive from the TV:
1. Turn off the TV.
2. Disconnect your USB thumb drive from the USB port on the
side of the TV.
48
6
Back Button
Highlight this button and
press OK to return to
the previous screen.
Connected
Sources
Displays
connected USB
devices.
Back Button
Highlight and press OK to return to left column.
Current Folder
Displays the folder path.
VIZIO
Photo
VIZIO_2GB\Photo\root
USB1:
Current Folder
root
Start Fullscreen
Slideshow
A.jpg
B.jpg
C.jpg
D.jpg
E.jpg
F.jpg
H.jpg
I.jpg
Start Slideshow
Sort by Name or Date
Sort:
Name A-Z
View Thumbnails/Folders
View:
Folders
Adjust Slideshow Settings
Folder Contents
This area displays the
contents of the currently
selected folder. You can
browse files and folders
using the Arrow and OK
buttons on the remote.
Settings
File Name: D 1920x1080
Resolution: 1920x1080
Size:
1607270KB
G.jpg
Page 1 of 1
Photo Information
Displays the name,
resolution, and file
size of the currently
selected photo.
Page Information
If your USB thumb drive has more
files than can be displayed on a
single screen, the page information is
displayed here.
PHOTO VIEWER
49
A
Do you have questions? Find answers here:
SUPPORT.VIZIO.COM
Find help with:
•New product setup
•Connecting your devices
•Technical problems
•Product updates and more.
Live chat
support available
You can also contact our
award-winning support team:
Phone: (877) 698-4946 (toll-free)
Email: techsupport@VIZIO.com
Hours of Operation:
Monday - Friday: 7 am to 11 pm (CST)
Saturday - Sunday: 9 am to 6 pm (CST)
A
There is no sound.
• Press VOLUME UP on the remote control.
The TV displays “No Signal.”
• Press the INPUT button on the remote control to select a
different input source.
•
If you are using an antenna or cable TV connected directly
to the TV, scan for channels. See Finding Channels on
page 32.
There is no power.
• Ensure the TV is plugged into a working electrical outlet.
• Ensure the power cable is securely attached to the TV.
• Press the POWER button on the remote or on the side of
the TV to turn the TV on.
•
Press the MUTE button on the remote to ensure mute is
off.
•
Check the audio settings. See Adjusting the Audio Settings
on page 29.
•
Ensure the speakers are set to On.
•
Ensure no headphones are connected to the TV.
•
Check the audio connections of external devices (Blu-ray
player, game console, cable/satellite box) that are
connected to the TV.
•
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
The power is on, but there is no image on the screen.
• Ensure all cables are securely attached to the TV.
• Ensure all devices are connected correctly. Devices differ;
see your device’s user manual for details.
The sound is flat or dialog is not audible.
• Adjust Brightness, Contrast, or Backlight. See Adjusting
the Picture Settings on page 21.
•
• Press the INPUT button on the remote to select a
different input source.
Turn off Sound Leveling. See Adjusting the Audio Settings
on page 29.
The colors on the TV don’t look right.
• Adjust the Color and Tint settings in the Picture menu. See
Adjusting the Picture Settings on page 21.
•
51
Check all cables to ensure they are securely attached.
A
The TV has pixels (dots) that are always dark or always lit.
• Your HDTV is precision-manufactured using an extremely
high level of technology. However, sometimes pixels may
not display correctly. These types of occurrences are
inherent to this type of product and do not constitute a
defective product.
The buttons on the remote aren’t working.
• The Red and Yellow hot key buttons below the V button
do not operate with this model.
•
Ensure you are only pressing one button at a time.
•
Point the remote directly at the TV when pressing a
button.
•
Replace the remote batteries with new ones. See
Replacing the Batteries on page 11.
I see “noise” or static on the screen.
• When your TV’s digital capabilities exceed a digital
broadcast signal, the signal is up-converted (improved) to
match your TV’s display capabilities. This up-converting
can sometimes cause irregularities in the image.
The image quality is not good.
• For the best image quality, view high-definition programs
using digital sources. Connect your devices with HDMI
cables.
•
• If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
When I change input source, the display image changes size.
• The TV remembers the viewing mode on each input
source. If the viewing mode on the new input source
differs from the one on the input source you switch from,
the difference may be noticeable.
The picture is distorted.
• Nearby electrical devices may be interfering with the
TV. Separate the TV from electrical appliances, cars, or
fluorescent lights.
•
• Ensure all cables are securely attached.
The display image does not cover the entire screen.
• If you are using TV, AV, or Component with 480i input,
press the WIDE button on the remote to change the
screen mode.
52
See Changing the Screen Aspect Ratio on page 20.
B
Specifications
D43-C1
Screen Size:
43" Class
Viewable Area:
42.5"
Dimensions w/ Stand:
w/o Stand:
37.99" x 24.53" x 8.27"
37.99" x 22.36" x 2.52"
Weight w/ Stand:
w/o Stand:
19.84 lbs
19.40 lbs
TV Type:
Refresh Rate:
Direct LED
60 Hz (120 Hz Effective Refresh Rate)
Maximum Resolution:
1920 x 1080 (Full HD)
Pixel Pitch:
0.490 mm (H) x 0.490 mm (V)
Dynamic Contrast Ratio:
200,000: 1
Clear Action
240
Viewing Angle:
178°/ 178°
HDMI Inputs:
2
Component Video Inputs:
1
Composite Inputs:
1 (shared with Component)
RF Antenna Input:
1
USB 2.0 Ports:
1
Audio Outputs:
RCA Stereo,
Optical Digital
OSD Language:
English, Spanish, French
53
B
D43-C1
Remote Control Model:
Certifications:
XRT010
UL, cUL, NOM, BETS-7/ICES-003 Class B,
HDMI (CEC, ARC), Dolby Digital
Compliance:
Energy Star 6.1
COUNEE
NRCan
NOM-032
Voltage Range:
120 V @ 60 Hz
Power-On Consumption:
46 W
Standby Power Consumption:
< 0.5 W
Zero Bright Pixels Guarantee:
Yes
54
C
Limited Warranty
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only.
VIZIO provides a warranty to the original purchaser of a new Product
against defects in materials and workmanship for a period of one (1) year
of non-commercial usage and ninety (90) days of commercial use. If a
Product covered by this warranty is determined to be defective within the
warranty period, VIZIO will either repair or replace the Product at its sole
option and discretion.
other than by a VIZIO authorized service center. Products with unreadable
or removed serial numbers, or requiring routine maintenance are not
covered. This one year limited warranty does not cover Products sold “AS
IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR
DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET
FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND
DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S
NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH
DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE
PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR
LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST
REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL
DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT
NOTICE.
To obtain warranty service, contact VIZIO Technical Support via e-mail:
TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946)
from 7:00AM to 11:00PM Monday through Friday and 9:00AM to 6:00PM
Saturday and Sunday, Central Standard Time, or visit www.VIZIO.com. PREAUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO
A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase
receipt or copy thereof is required to show that a Product is within the
warranty period.
PARTS AND LABOR
There will be no charge for parts or labor during the warranty period.
Replacement parts and Products may be new or recertified at VIZIO’s
option and sole discretion. Replacement parts and Products are warranted
for the remaining portion of the original warranty or for ninety (90) days
from warranty service or replacement, whichever is greater.
CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.
TYPE OF SERVICE
Defective Products must be sent to a VIZIO service center to obtain
warranty service. VIZIO is not responsible for transportation costs to the
service center, but VIZIO will cover return shipping to the customer. PREAUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A
VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
PERSONAL DATA
If your VIZIO product is capable of storing personal data and other
information, ALL CONTENTS AND INFORMATION WILL BE DELETED IN
THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARANTY SERVICE. If
this occurs, your product will be restored to you configured as originally
purchased. You will be responsible for restoring all applicable data and
passwords. Recovery and reinstallation of user data is not covered under
this Limited Warranty. In order to protect your personal information, VIZIO
recommends that you always clear all personal information from the unit
before it is serviced, regardless of the servicer.
Product returns to VIZIO’s service centers must utilize either the original
carton box and shipping material or packaging that affords an equal
degree of protection. VIZIO Technical Support will provide instructions for
packing and shipping the covered Product to the VIZIO service center.
ZERO BRIGHT PIXEL DEFECT GUARANTEE
This policy covers “zero bright pixel” defects for the duration of the limited
“ONE YEAR WARRANTY” on select new product purchases. To determine if
this guarantee applies to your product, refer to the “DETAILS” tab of the
model’s product information page (www.VIZIO.com) or look for the “zero
bright pixel” guarantee on the box.
LIMITATIONS AND EXCLUSIONS
VIZIO’s one-year limited warranty only covers defects in materials and
workmanship. This warranty does not cover, for example: cosmetic
damage, normal wear and tear, improper operation, improper voltage
supply or power surges, signal issues, damages from shipping, acts of
God, any type of customer misuse, modifications or adjustments, as well
as installation and set-up issues or any repairs attempted by anyone
55
D
Legal & Compliance
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice
1. The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in
order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modification to this equipment. It is the
responsibilities of the user to correct such interference.
FCC Warning
Changes or modifications not expressly approved by the party responsible for
compliance with the FCC Rules could void the user’s authority to operate this
equipment.
Other
Image(s) used under license from Shutterstock.com
56
© 2015 VIZIO INC. ALL RIGHTS RESERVED.
140223EM-US-NC