Remote Operator for Vision & Samba Controllers

Remote Operator for Vision & Samba Controllers
Headquarters
Unitronics (1989) (R"G).
Unitronics Building, Airport City
P.O.B. 300, Ben Gurion Airport, Israel 70100
Tel: + 972 (3) 977 8888 Fax: + 972 (3) 977 8877
Remote Operator for Vision & Samba Controllers
User Guide
11/15
Table of Contents
Overview ....................................................................................................... 1
Supported Controllers...................................................................................... 1
First-time Use ................................................................................................ 2
Adding PLCs ................................................................................................... 2
Adding Groups ............................................................................................... 3
Using Remote Operator ................................................................................... 4
PLC Information ............................................................................................. 5
Application Settings ........................................................................................ 6
Overview
If you use Unitronics’ Vision & Samba controllers, Remote Operator enables you to
remotely access your controllers via smartphone and tablet. Use it to:
•
Remotely access Vision and Samba controllers via Internet or wireless LAN
connection
•
Control and monitor automation and machines processes remotely
•
View operational conditions, Alarms, data, and Trends in real time
•
Configure communication channels for multiple controllers
Supported features include:
•
Organize controllers in Favorites and Groups
•
Shareable Configurations – send your list of controllers and settings via email
for backup, or to share on another device
•
Security via Password – create a password the first time you use the app to
prevent unauthorized entry
•
Pinch to zoom
•
Display size changes according to the controller screen resolution
Supported Controllers
Mobile device minimum OS version:
Android 4.0+, API 14+
iOS 7+
Supported Controllers: V350, V430, V700, V570, V1040, V1210, SM35, SM43, SM70
Unitronics
1
User Guide
11/15
First-time Use
1. To open Remote Operator, tap on the app icon.
2. Create a Password; this prevents unauthorized entry
to the app.
You can also set a password recovery question
(recommended).
3. Tap OK, the app opens an empty Favorites screen.
Adding PLCs
Tap
to add PLCS,
configuring controllers and
communication channels.
• PLC Nickname
Optional, but must be
unique.
• PLC Name
Must exactly match the
actual PLC Name,
including capital letters.
• IP Address/Host & TCP
and Port
These define the
communication channel
** The IP Address & Port must be a unique combination.
** Address Format: Incorrect 10.000.000.037 Correct 10.0.0.37.
• Group Name
Tap to open the Group list.Add to Favorites
When this is checked, the PLC is added to the Favorites list as well as a Group
After you are finished, if desired, tap Check PLC Connection.
• Tap OK to save the PLC and return to Favorites.
2
Unitronics
11/15
Remote Operator for Vision & Samba Controllers
To delete a PLC:
•
Android
Press and hold it to reveal the available options.
•
IOS
Swipe left to reveal the options.
Adding Groups
1. In the Favorites screen,
tap
to open Groups.
2. Tap
to add a group.
3. Enter the Group Name,
and a Comment if desired.
4. Tap OK to add the Group
to the list.
5. Tap
to return to
Favorites.
6. Tap
to Hide/Show the
application bar at the
bottom of the screen.
3
Unitronics
User Guide
11/15
Using Remote Operator
The PLCs you add are in Favorites and Groups.
A PLC marked with a green hand is active. You can
access it remotely by tapping it.
During the session, use the Application bar icons to:
Switch between View Only or Full Control mode to
disable or enable buttons and touch properties on the
PLC screen displayed on your mobile device
Set the Refresh rate (seconds)
Pause the Remote session
Exit the Remote session
4
Unitronics
11/15
Remote Operator for Vision & Samba Controllers
PLC Information
To view /edit PLC details, tap
.
PLC Communication
• Tap fields to edit communication details.
• Use View Mode to select View Only or Full
Control mode.
• Check the PLC Connection.
PLC System Info
• When connected:
tap Get PLC Information to view PLC OS data.
• When not connected:
shows details from last session.
5
Unitronics
User Guide
11/15
PLC Location Info
• Tap fields to enter data regarding location,
relevant contact details, add comments, and edit
the PLC’s group.
• Delete the PLC from Favorites by unchecking Add
to Favorites
Application Settings
If the Application Bar is hidden,
tap the 3 bars in the upper right
to reveal it, then select the
Setting icon.
Startup Page: Remote Operator
will automatically load and check
communications for all the PLCs
located on the selected page
Sharing Settings
1. Tap Share, and follow the
on-screen instructions to send
the file, Share.unitronics.
2. When the Share.unitronics is received on the second device, tap to open it. Remote
Operator will open with the Settings in the Share file.
Note that Remote Operator must be installed on the receiving device.
6
Unitronics
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement