SPF 2200-S Pet Feeder
Quick Start Guide
Safety Notice
WARNING: Failure to follow these safety notices could result in fire,
electric shock, other injuries, or damage to the Smart Pet Feeder and
other property. Read all the safety notices below before using the
Smart Pet Feeder.
• Avoid high humidity or extreme temperatures.
• Avoid long exposure to direct sunlight or strong ultraviolet light.
• Do not drop or expose the unit to intense vibration.
• Do not disassemble or try to repair the unit yourself.
• Do not expose the unit or its accessories to flammable liquids, gases
or other explosives.
3
Technical Specifications
Hopper Capacity
• 5L
Power
• DC power cord
• Backup batteries: 3 X D cell
batteries (or 1 X 18650 type Liion battery)
Auto Feeding Time
Dimension
N. W.
Color
4
• 1-6 meals per day
• 383 x 221 x 338 mm
• 1.55 kg
• White
1 Welcome
The Pet Feeder allows you to feed your pet or apply schedules for
automatic feeding.
This guide will provide you with an overview of the product and help
you get through the initial setup.
Features:
• Dual feeding mode - Automatic & manual feeding
• Accurate feeding - Schedule up to feed 6 meals per day
• Recording and playback function - Recording will be played every
time feeding
• Food shortage and stuck alarm - Make sure enough food for pet
• Translucent barrel - Easy to observe pet food
• Dual power protective - Battery backup, continuously operate when
power off.
5
2 In the box
• Pet Feeder x 1
• Power Adapter x 1
• Quick Guide x 1
NOTE：18650 battery box needs to be purchased
separately.
Please check the condition and the accessories of pet feeder after you
open the box.
Tips:
Dry and solid pet food only, recommed food diameter between 5 to 15
mm.
6
3
Get to know your device
Cover
Button & LCD display screen
Food outlet
Bowl
7
Loudspeaker
Power jack
Battery box
Battery box
3 x D cell batteries ( or 1 x 18650 batteries ). Please pay attention to the
polarity. Please note that the battery charging is for backup purpose
only.
Note: When the battery power is below 19%, the phone will receive a
low battery alarm.
Power jack
Use the supplied power adapter.
Loudspeaker
After the recording is completed, the recording will be played 3 times
every time the food is fed.
8
1
2
3
a
d
b
e
c
f
g
4
5
6
a Schedule on
1 Power/ Setting button
c Recording processing
3 Return / Lock button
b Feeding processing
2 Recording button
d Battery power on
4 Left button
f Food shortage alarm
6 Right button
e USB power on
5 Feeding button
g Scheduled plans on
9
4
Get started
•Button operation setting
1. Device time setting (The time is 24-hour format)
1.1 Press and hold the setting button for 2 seconds, the hour digit
of the time flashes, use the left or right button to adjust to the exact
hour, then short press the Power/Setting button to confirm and make
the minute digit flashes.
1.2 When the minute digit of the time flashes, use the left or right
button to adjust to the exact minute, short press the setting to confirm.
1.3 After finishing the setting of the minute, the device will directly
go to the schedule setting. If you don’t want to schedule the plan yet,
simply press and hold the Return/Lock button for 5 seconds to exit the
setting mode.
10
2. Schedule setting (Up to 6 schedules)
2.1 To enter the schedule mode, you have to go through the device
time setting progress, if the time does not need to be modified, you can
directly short press the Power/Setting button to confirm the current
flashing value and enter the schedule setting mode. At this time, the
schedule icon is always on and the chedule group flashes (press the
left or the right button to select the schedule to be modified. Take the
setting of the third schedule as an example.
2.2 Press the right button twice to make the number 3 flash, short
press the set button to confirm.
2.3 Enter the setting mode of schedule 3, the hour digit of the time
flashes at this time, use the left and right keys to adjust the hour digit
of the schedule execution to the target time point, short press the
setting button to confirm.
11
2.4 The minute digit of the time flashes, use the left or right button
to adjust the minute digit of the schedule execution to the target time
point, short press the setting button to confirm.
2.5 The original minutes of the display screen flashes, and the
display shows P-:XX is the setting status of the number of portions.
Use the left or right button to adjust the number of portions (0-12),
and short press the setting button to confirm. At this time, the setting
of 3 schedules is completed, and the flashing state of 3 schedules is
restored.
2.6 If you need to set up other schedules, use the left or right
button to select the corresponding schedule numbers, and repeat
steps 2.2~2.5 above.
12
3. Manual Feeding
You can feed your pet manually by short press or long press the
Feeding Button
• Short press: Supply a portion(1 portion = 10g) of food and play the
recording 3 times.
• Long press: Supply food continuously and play the recording 3 times.
4. Record your Voice
Short press the Recording button to start or end the recording.
When recording, the Recording Processing icon will light up and the
recording will last for 10 seconds at most. To end the recording within
10 seconds, just press the button again to end the recording.
5. Restore the Factory Default Settings
Hold and press the recording button and return button for 3 seconds,
and the restoring will be completed, then the screen will show "CLR"
Note: In the setting state, if you need to exit the setting mode,
please press and hold the return button for 5 seconds, and the time
displayed on the screen will be restored to the current time.
In the setting mode, if you need to return to the previous setting,
short press the return button.
When the number of copies of the schedule is 0, the schedule will
be not executed.
•Indicator
The indicator's status gives the following information:
Device's status
Indicator's status
Food shortage alarm
Food stuck alarm
Low battery alarm
Red light flashed rapidly, 0.5 second cycle.
Red light flashed slowly, 1.5 second cycle.
Red light flashed slowly, off for 5 seconds,
on for 0.5 seconds.
13
5. FAQ:
•
How to install the 18650 battery:
Note: Both the battery and the battery box of 18650 need to be
purchased separately
1. Get a battery box with 18650 battery, like figure 1.
2. Place the feeder horizontally in front of the body, then put the
battery box into the battery slot according to the direction shown in
the figure 2, and then push it forward to fix it.
Push forward
Figure 1
•
•
Figure 2
How to remove and install the barrel:
How to remove the barrel:
1. Please fix the white main body first, and then hold the black barrel
with both hands and lift it up, then the barrel can be disassembled
2. Please wipe it clean with a clean damp cloth.
Main body
14
Barrel
• How to install the barrel：
Please return the paddle in the barrel (as shown in the figure below),
and then place the barrel on the main body according to the direction
when it was removed and press it down gently to fix the barrel.
15
">
