12_CMC,CMW,CMP final - Atlanta Fixture & Sales Company

Cheese
Melters
PRODUCT:
QUANTITY:
Models: CMC CMW CMP
ITEM#:
Designed Smart.
CMC-24 208V
CMC-36 208V
CMC-48 208V
CMC-24 240V
CMC-36 240V
CMC-48 240V
Counter Mount (C)
Wall Mount (W)
Pass-Through (P)
Bid Specifications
Unit construction is stainless steel with 4" heavy-duty legs
as standard, on Counter Mount and Pass-Through models.
Top, sides and back (except pass-through model) are fully
insulated with high quality insulation. Powermiser control
allows unit to maintain standby level with 25% of heating
capacity. Unit has four shelf height “microswitch” that is
activated by placing a plate on the shelf, which provides
ultimate finishing capabilities. All controls are solid-state
with electrical fan-cooled compartment. Infrared heaters
are easy to snap-in and out. All hardware is
stainless steel. All units are single phase.
Built Solid.
Reliability backed by APW Wyott’s Warranty
• APW Wyott’s Cheese Melters are backed by a 1-year
Parts and Labor warranty.
Model CMC Cheese Melter
APW Wyott Design Features
• Top, sides and back (except on pass-through models) are
insulated with 1” of high quality insulation.
• When the master switch is ”on,” the unit stays “on”
at 25% of heating capacity.
• Four shelf height “microswitch”.
• Food placed on rack activates heat to 100% heat “on”.
• The 24" and 36" models have one unit “on-off” switch
and one red unit “on” light.
• The 48" model has one unit “on-off” switch and one
red unit “on” light. There are also right-half heater “on”
switches and right and left “on” lights. Use half, or all of
the unit as needed.
• Solid-state controls.
• Fan-cooled electrical compartment
• Instant “on,” instant “off” even heating, top quartz elements.
• Cheese Melters are Certified by the following agencies:
C
US
Rev. 1/1/2003
Cheese
Melters
Models: CMC CMW CMP
PRODUCT:
QUANTITY:
ITEM#:
PRODUCT SPECIFICATIONS
Construction:
Stainless steel construction. Top, sides and back
(except pass-through model) have 1" high
quality insulation.
Electrical Information:
Units are wired for hard wiring in the field.
F.O.B. Cheyenne, WY
Cheese Melter
Model
CMC-24
CMC-36
CMC-48
Wall Mount
CMW-24
CMW-36
CMW-48
Pass Through
CMP-24
CMP-36
CMP-48
Electrical
208V, 2.4KW, 11.5 Amps
240V, 2.4KW, 10.0 Amps
208V, 3.6KW, 17.3 Amps
240V, 3.6KW, 15 Amps
208V, 4.2KW, 20.2 Amps
240V, 4.2KW, 17.5 Amps
Dimensions
19"H x 27"W x 17"D
(48.9 cm x 68.6 cm x 43.8 cm)
19"H x 361⁄2"W x 17"D
(48.9 cm x 92.7 cm x 43.8 cm)
19"H x 50"W x 17"D
(48.9 cm x 127 cm x 43.8 cm)
Ship Wt.
76 lbs.
(34.5 kg)
92 lbs.
(41.8 kg)
145 lbs.
(65.9 kg)
208V, 2.4KW, 11.5 Amps
240V, 2.4KW, 10 Amps
208V, 3.6KW, 17.3 Amps
240V, 3.6KW, 15 Amps
208V, 4.2KW, 20.2 Amps
240V, 4.2KW, 17.5 Amps
15"H x 27"W x 17"D
(38.7cm x 68.6 cm x 43.8 cm)
15"H x 361⁄2"W x 17"D
(38.7cm x 92.7 cm x 43.8 cm)
15"H x 50"W x 17"D
(38.7cm x 127 cm x 43.8 cm)
78 lbs.
(35.5 kg)
92 lbs.
(41.8 kg)
127 lbs.
(57.6 kg)
208V, 2.4KW, 11.5 Amps
240V, 2.4KW, 10 Amps
208V, 3.6KW, 17.3 Amps
240V, 3.6KW, 15 Amps
208V, 4.2KW, 20.2 Amps
240V, 4.2KW, 17.5 Amps
19"H x 27"W x 151⁄8"D
(48.9 cm x 68.6 cm x 38.4 cm)
19"H x 361⁄2"W x 151⁄8"D
(48.9 cm x 92.7 cm x 38.4 cm)
19"H x 491⁄2"W x 151⁄8"D
(48.9 cm x 127 cm x 38.4 cm)
78 lbs.
(35.5 kg)
92 lbs.
(41.8 kg)
130 lbs.
(59 kg)
Inside Dimensions: 24 inches: 211⁄4"W x 913⁄16"H x 141⁄2"D; 36 inches: 303⁄4"W x 913⁄16"H x 141⁄2"D; 48 inches: 441⁄4"W x 913⁄16"H x 141⁄2"D.
All units are single phase.
World Class Support
World Class Sales Support to assist you with finding the right solution to your operations needs. Call Customer Service at
(800) 527- 2100 or Fax your request to (214) 565-0976.
For more information about APW Wyott’s World Class Support and
High Performance Equipment, look us up on the Internet at
www.APWwyott.com
Most Extensive Service System in the Industry! APW Wyott
has two levels of service support for your needs:
• Direct Service Hot Line to Service Department, call
(800) 752-0863.
• To find the Registered Service Technician in your area, call
Automated Service Hot Line at (800) 733-2203.
APW Wyott reserves the right to modify specifications or discontinue models without incurring obligation.
Rev. 1/1/2003
#1911