Insignia NS-HTTCBK6 Ceramic Tower Heater User manual

Add to My manuals
15 Pages

advertisement

Insignia NS-HTTCBK6 Ceramic Tower Heater User manual | Manualzz

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm Page 1 Friday, May 8, 2015 11:03 AM

USER GUIDE

Ceramic Tower Heater

NS-HTTCBK6

Before using your new product, please read these instructions to prevent any damage.

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm Page 2 Friday, May 8, 2015 11:03 AM

Insignia Ceramic Tower Heater

Insignia Ceramic Tower Heater

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

IMPORTANT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Main features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Display/control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Assembling your heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Using your heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Cleaning and maintaining your heater . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

ONE-YEAR LIMITED WARRANTY - INSIGNIA . . . . . . . . . . . . . . . . . . . . . . .13

Introduction

Congratulations on your purchase of a high-quality Insignia product. Your

NS-HTTCBK6 represents the state of the art in ceramic heater design and is designed for reliable and trouble-free performance.

IMPORTANT INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your heater.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your heater.

2 www.insigniaproducts.com

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm Page 3 Friday, May 8, 2015 11:03 AM

Insignia Ceramic Tower Heater

When using the heater, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1 Read all instructions before using this heater.

2 This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.

3 Use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.

4 Extreme caution is necessary when the heater is used by or near children or invalids and whenever the heater is left operating and unattended.

5 Always unplug the heater when not in use.

6 Do not operate the heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.

Discard the heater, or return it to an authorized service facility for examination and/or repair.

7 Do not use outdoors.

8 This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate the heater where it may fall into a bathtub or other water container.

9 Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange the cord away from traffic area and where it will not be tripped over.

10 To disconnect the heater, turn the controls to off, then remove the plug from the wall outlet.

11 Prior to cleaning or other maintenance, the heater must be disconnected from the wall outlet.

12 Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.

13 To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.

14 A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.

15 Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.

16 Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).

www.insigniaproducts.com

3

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm Page 4 Friday, May 8, 2015 11:03 AM

Insignia Ceramic Tower Heater

17 This heater is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless the have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

18 Children should be supervised to ensure that they do not play with the heater.

19 CAUTION: Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

20 WARNING: In order to avoid overheating, do not cover the heater.

21 This heater draws up to 1500 W during operation. To prevent overloading a circuit, do not plug the heater into a circuit that already has other appliances working.

22 It is normal for the plug to feel warm to the touch, however, a loose fit between the wall outlet and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlets.

23 The output of this heater may vary and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns.

24 Do not leave the heater on unattended.

25 This appliance has a polarized plug (one blade is wider than the other).

To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If is still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

26 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

27 The heater must not be located immediately below a socket-outlet.

28 Do not use this heater near a bath, a shower, or a swimming pool.

29 Do not spray pesticide or any other flammable spray around the heater. It could damage the heater.

30 Stop using the heater and unplug it immediately if any unusual smell or sounds come from the heater.

31 Do not cover the heater when in use or when not allowed to cool completely.

SAVE THESE INSTRUCTIONS

4 www.insigniaproducts.com

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm Page 5 Friday, May 8, 2015 11:03 AM

Insignia Ceramic Tower Heater

WARNING

Electric Shock Hazard

Failure to follow these instructions can result in electric shock, fire, or death.

Features

• PTC heater with 1500W power

• Electronic button control with LED display

• Digital temperature control from 59° F to 95° F

• 12-hour timer

• Easy-carry handle

• Detachable plastic base

• Tip-over protection

• Double over-heating protection

Package contents

• Ceramic Tower heater

• Heater base

• Remote control (with pre-installed battery)

• User Guide www.insigniaproducts.com

5

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm Page 6 Friday, May 8, 2015 11:03 AM

Insignia Ceramic Tower Heater

Main features

Display panel

Control panel

Front mesh

Back grill

Front cover

Swing base

6 www.insigniaproducts.com

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm Page 7 Friday, May 8, 2015 11:03 AM

Insignia Ceramic Tower Heater

Display/control panel

On/Off indicator

Time and temp display

Swing indicator

Power button

Timer and Temp + (up) button

Low power/High power button

SET button

High power indicator

Temp or Time indicator

Low power indicator

Timer and Temp – (down) button

Swing button www.insigniaproducts.com

7

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm Page 8 Friday, May 8, 2015 11:03 AM

Insignia Ceramic Tower Heater

Remote control

Power button

Timer and Temp + (up) button

Timer and Temp – (down) button

Low power/High power button

Swing button

SET button

NS-RCHTTCBK6

Assembling your heater

1 Remove the package contents from the box, then remove the bubble wrap from the heater, the base, and the remote control.

2 Carefully place your heater face-up on a cushioned, clean surface to prevent scratches.

3 Unscrew the nut from the threaded piece on the bottom of the heater.

8 www.insigniaproducts.com

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm Page 9 Friday, May 8, 2015 11:03 AM

Insignia Ceramic Tower Heater

4 Fit the base onto the threaded piece on the bottom of the heater, then secure it with the nut you removed previously.

5 Place the heater upright on a stable and level surface.

Using your heater

Caution

Never leave an operating heater unattended.

1 Firmly grab the pull-tab on the remote control battery and pull it to remove it from the remote control.

2 Make sure that neither the heater nor the power cord has been damaged in any way during transportation.

3 Place the heater on a firm, level surface, at least three feet (0.9 m) away from any wall or other objects such, as furniture, curtains, plants, or combustible material.

4 Fully unwrap the power cord and plug it into a standard wall plug

(120 VAC~60 Hz).

5 Press the power button to turn the heater on. The display shows the current room temperature in °F with the °F icon turned on. The default temperature setting is 77° F and the heater is on low power with the low power indicator turned on.

If the ambient temperature is 2° lower than the set temperature, the heater turns on after 10 seconds and remains on until the set temperature is reached, then the heater, fan, and swing turn off.

www.insigniaproducts.com

9

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm Page 10 Friday, May 8, 2015 11:03 AM

Insignia Ceramic Tower Heater

6 To change the settings when the heater is turned on, do the following:

To switch between low and high power setting

To increase or decrease the temperature setting

• Press . The high or low power indicator turns on.

To turn the oscillator on to circulate the heat

To set how long the heater stays on

1. Press twice.

2. Press the + (up) or (down). The temperature setting changes by

1°C each time you press the button and is shown on the display.

3. Press again to confirm. The display returns to the current room temperature. The heater turns on and stays on until the set temperature is reached, then the heater, fan, and swing turn off.

• Press . The swing indicator turns on and the heater begins to oscillate. Press again to turn it off.

1. Press SET . The time indicator turns on.

2. Press the + (up) or

(down). The timer setting changes by one hour each time you press the button and is shown on the display.

3. Press SET to confirm. The heater stays on until the set time reaches 0, then the heater returns to standby mode.

Note

The display remains bright for one minute after changes are made, then the display dims. Press any button to return the display to normal.

7 Press the power button to turn the heater off (go to standby mode).

When you turn the heater back on, the settings remain the same as when you turned it off.

Cleaning and maintaining your heater

• Always remove the plug from the wall socket and allow the heater to cool before cleaning.

• Wipe the heater with a soft, damp cloth. Use a mild detergent if necessary. DO NOT USE solvents or harsh cleaners or you may damage the finish.

• Vacuum the grill with your vacuum's brush attachment every few weeks for optimal performance.

• If the heater will not be used for an extended period of time, store it in a dry place.

Safety features

The heater is equipped with double over-heating protection, which causes the unit to stop operating in the event that the internal temperature exceeds the normal operating temperature. It also includes tip-over protection, which turns the heater off in case it is tipped over.

If the heater shuts down:

10 www.insigniaproducts.com

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm Page 11 Friday, May 8, 2015 11:03 AM

Insignia Ceramic Tower Heater

1 Turn off and unplug the heater.

2 Put the heater in the upright position, if necessary.

3 Wait for at least 10 minutes until the heater cools.

4 Plug the heater into the power outlet and then turn it on. The heater resumes its normal operation.

Replacing your remote control battery

1 Squeeze then pull the battery holder out of the remote control.

Squeeze together then pull out.

Squeeze together then pull out.

2 Insert the battery into the battery holder with the positive (+) side toward the front of the remote control.

Positive (+) toward front.

Insert battery

3 Push the battery holder into the remote control.

www.insigniaproducts.com

11

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm Page 12 Friday, May 8, 2015 11:03 AM

Insignia Ceramic Tower Heater

Troubleshooting

Caution

Do not try to repair your heater yourself. Doing so invalidates the warranty.

Problem Possible cause Possible solution

Your heater shuts off unexpectedly or fails to operate

The room is not warm enough

There is no power.

The set temperature is lower than the current room temperature.

Room temperature has reached the temperature set on the temperature control dial.

One of the safety protection devices was activated to prevent overheating.

Make sure that the heater is plugged in and that the electrical outlet is working.

Set the desired temperature higher than the current temperature to restart the heater.

• This is normal. The heater restarts when room desired temperature.

temperature is lower than the set temperature.

• Adjust the temperature control dial setting if it's not set to your

1. Place the heater in an upright position.

2. Check for any obstructions. If you find an obstruction, turn the heater off.

3. Unplug the heater and wait at least 10 minutes for it to cool down.

4. Carefully remove the obstruction. Plug the heater in and restart it

as described in “Using your heater” on page 9.

5. If you still notice the same problem, remove the plug from the wall and have the heater checked by an authorized service person.

The room is too large or a window is open.

• Turn on the main heat source for the room.

• Use more portable heaters.

• Close the window.

The temperature is set too low.

• Increase the temperature setting.

The power setting is too low.

• Select a higher power setting.

Specifications

Model number

Voltage

Frequency

Power

Noise level

Dimensions

Remote control battery

NS-HTTCBK6

120 VAC

60 Hz

1500 Watts

≤ 50 dB

9.8 x 9.8 x 31.5 in. (250 x 250 x 800 mm)

CR2302 Lithium button

12 www.insigniaproducts.com

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm Page 13 Friday, May 8, 2015 11:03 AM

Insignia Ceramic Tower Heater

ONE-YEAR LIMITED WARRANTY - INSIGNIA

Definitions:

The Distributor* of Insignia branded products warrants to you, the original purchaser of this new

Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).

For this warranty to apply, your Product must be purchased in the United States or Canada from a Best

Buy or Future Shop branded retail store or online at www.bestbuy.com, www.bestbuy.ca, or www.futureshop.com and is packaged with this warranty statement.

How long does the coverage last?

The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product. Your purchase date is printed on the receipt you received with the Product.

What does this warranty cover?

During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Insignia and are not returned to you. If service of Products or parts are required after the

Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the Product.

How to obtain warranty service?

If you purchased the Product at a Best Buy or Future Shop retail store location, please take your original receipt and the Product to any Best Buy. Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. If you purchased the

Product from a Best Buy or Future Shop online web site (www.bestbuy.com, www.bestbuy.ca, or www.futureshop.com), mail your original receipt and the Product to the address listed on the web site.

Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging.

To obtain warranty service, in the United States call 1-888-BESTBUY, Canada call 1-866-BESTBUY. Call agents may diagnose and correct the issue over the phone.

Where is the warranty valid?

This warranty is valid only in the United States and Canada at Best Buy branded retail stores or websites to the original purchaser of the product in the county where the original purchase was made.

What does the warranty not cover?

This warranty does not cover:

• Customer instruction/education

• Installation

• Set up adjustments

• Cosmetic damage

• Damage due to weather, lightning, and other acts of God, such as power surges

• Accidental damage

• Misuse

• Abuse

• Negligence www.insigniaproducts.com

13

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm Page 14 Friday, May 8, 2015 11:03 AM

Insignia Ceramic Tower Heater

• Commercial purposes/use, including but not limited to use in a place of business or in communal areas of a multiple dwelling condominium or apartment complex, or otherwise used in a place of other than a private home.

• Modification of any part of the Product, including the antenna

• Display panel damaged by static (non-moving) images applied for lengthy periods (burn-in).

• Damage due to incorrect operation or maintenance

• Connection to an incorrect voltage or power supply

• Attempted repair by any person not authorized by Insignia to service the Product

• Products sold “as is” or “with all faults”

• Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)

• Products where the factory applied serial number has been altered or removed

• Loss or Theft of this product or any part of the product

• Display panels containing up to three (3) pixel failures (dots that are dark or incorrectly illuminated) grouped in an area smaller than one tenth (1/10) of the display size or up to five (5) pixel failures throughout the display. (Pixel based displays may contain a limited number of pixels that may not function normally.)

• Failures or Damage caused by any contact including but not limited to liquids, gels or pastes.

REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY FOR BREACH

OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES

FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT

LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA

PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND

IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES

OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN

DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR

IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO

NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION

MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO

HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.

Contact Insignia:

For customer service please call 1-877-467-4289 www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated companies.

Registered in some countries.

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richfield, MN 55423 U.S.A.

©2015 Best Buy. All rights reserved.

Made in China

14 www.insigniaproducts.com

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm Page 16 Friday, May 8, 2015 11:03 AM www.insigniaproducts.com

1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)

INSIGNIA is a trademark of Best Buy and its affiliated companies.

Registered in some countries.

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richfield, MN 55423 U.S.A.

©2015 Best Buy. All rights reserved.

Made in China.

V1 ENGLISH

15-0373

advertisement

Related manuals