TP-LINK TD-W8901N Wireless N ADSL2+ Modem Router Quick Installation Guide
Below you will find brief information for Wireless N ADSL2+ Modem Router TD-W8901N. This guide will help you connect to the internet using DSL and configure the router for wireless connectivity. The guide provides instructions for connecting your devices and configuring your network.
PDF
Download
Document
Advertisement
Advertisement
TP-LINK Package Contents CD Setup Wizard (For Windows users only) The Reliable Choice E Insert the TP-LINK Resource CD into the CD-ROM drive. El Follow the pop-up flash video to connect your devices, then click RZ to continue. TP-LINK The Reliable Choice > o e e = Quick Installation Guide TD-W8901N Resource CD (Only for Windows) 150Mbps Wireless N ADSL2+ Modem Router [Ах (TIL Ethernet Cable ADSL Splitter Phone Cable x 2 Please check the LEDs (especially the ADSL LED). Then click Please select the appropriate setup wizard. 2 Select TD-W8901N and click Start Setup. pt and follow. eo bystep instructions until you C D Setu p Wiza rd ui tan Guide TP-UNK > >> > ¡=== = = For Windows users only == ян E , , НР | =. m= Install ADSL Device pe SE your mode Web-based Quick Setup Wizard QIG em antım a = | For users unable to run the Resource CD o И ptm вать [с | вт осесть нд оне N | f + e = OWA | | Th med i ing sn one evi ecessary information atom coma ee For a smoother setup, we suggest you consult your ISP for the 5e sise à subject change ou rca: More Fac, esos rte a bi pk co РАМ Browse со connection. Otherwise, please click NEXT to conti inue. following information first. The information will be necessary EX Car during the configuration stage. MODEL NO. TD-W8901N vPINCI: — — —— Connection Type: A Encapsulation Type (Optional): For the advanced configurations, please refer to the User Guide on the Resource CD provided. = 7 o e Web-based Quick Setup Wizard ( For users unable to run the Resource CD) 1 Connect your devices step by step following the figure. B Press the ON/OFF button of your modem router and make 4 Open your browser and type in http://192.168.1.1 in the sure the LEDs (especially the ADSL LED) display as shown address field, then press Enter. Use the default username below. admin and password admin to log into the Web-Management page. Wall Socket Phone Cable POWER: Solid light WLAN: Solid light or flashing Г Username: admin D aNn . | | Splitter Password: e..... E © PHONE MODEM : ON/OFF Button y 7 В [Login | ADSL: Solid light or flashing LAN: Solid light or flashing if the corresponding port is connected Copyright © 2014 TP-LINK Technologies Co., Ltd. All rights reserved. © @ © | | | E © нае Е | В Set your computer to Obtain an IP address / DNS server E Choose Quick Start in the main menu and click RUN WIZARD. address automatically. For details, please refer to T1 in mE Interface Advanced Access maintenance — Status Help Troubleshooting. Computer о J Phone Cable This ADSL Router is ideal for home networking and small business networking. The "Quick Start’ wi ill guide you t figure the ADSL router to connect to your ISP (Internet Service Provider). e ` {Ethernet Cable | RUNWIZARD 7106504802 REV2.0.0 Web-based Quick Setup Wizard ( For users unable to run the Resource CD) 6 The Quick Start screen will appear as below, and then click NEXT. Quick Start The Wizard will guide you through these four quick steps. Begin by clicking on NEXT. Step 1. Choose your time zone Step 2. Set your Internet connection Step 3. Wireless network configuration Step 4. Save settings of this ADSL Router NEXT Select the correct time zone for the modem router, and then click NEXT. Quick Start - Time Zone Select the appropriate time zone for your location and click NEXT to continue. (GMT) Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London + Troubleshooting В Select the Connection Type given by your ISP and then click NEXT. Here we use PPPoE/PPPoA as an example. Quick Start - ISP Connection Type Select the Internet connection type to connect to your ISP. Click NEXT to continue. O . î Choose this option to obtain a IP address automatically from À Dynamic IF Address your ISP. o ; î Choose this option to set static IP information provided to you A Static IP Address by your ISP. o ‚ я Choose this option if vour ISP uses PPPoE/PPPoA. (For most *) PPPoE/PPPoA DSL users) © Bridge Mode Choose this option If your ISP uses Bridge Mode. - g E Enter the Username and Password provided by your ISP and then click NEXT. Quick Start - PPPoE/PPPoA Enter the PPPoE/PPPoÆ information provided to vou by your ISP. Click NEXT to continue. Username: Password: VALS (0-255) VEL (35 (1-65535) Connection Type: | PPPoE LLC Ww 10 The WLAN function is enabled by default. It is strongly recommended to change the SSID (Wireless Network Name) and set a Pre-Shared Key for network security. Keep other settings by default, then click NEXT. (The default Pre-Shared Key, the same as the PIN code, is printed on the bottom label.) Quick Start - Wlan You may enable/disable Wlan, change the Wlan 5510 and Authentication type in this Page. Click NIEXT to continue. Access Point: (@) Activated ©) Deactivated 5510 :|TF-LINE_E56901 Broadcast 5510: @ Yes © Mo Authentication Type : WPAZ-P5k - Encyption : AES - 54275417 ~ Pre-Shared Hey | (8-83 ASCII characters or 34 hexadecimal characters) [next] Record your wireless information here: SSID(Wireless Network Name): Pre-Shared Key: 11 Complete the configuration and click NEXT. Quick Start Complete !! to save the current settings. The Setup Wizard has completed. Click on BACK to modify changes or mistakes. Click NEXT = Quick Start has completed. Click CLOSE to make your settings take effect. Quick Start Completed !! Saved Changes. E The basic settings for your modem router are completed. Please open the web browser and try to log on to http://www.tp-link.com to test your Internet connection. For the advanced configurations, please refer to the User Guide at http://www.tp-link.com. T1. How can | set my computer to Obtain an IP address / DNS server address automatically? For Mac OS X 1) Click the Apple icon on the upper left corner of the screen. 2) Go to “System Preferences -> Network”. 3) Select Airport on the left menu bar, and then click Advanced for wireless configuration; or select Ethernet for wired configuration. 4) In the Configure IPv4 box under TCP/IP, select Using DHCP. 5) Click Apply to save the settings. For Windows 7 1) Click “Start -> Control Panel -> Network and Internet -> View network status -> Change adapter settings”. 2) Right-click Wireless Network Connection (or Local Area Connection), and then click Properties. 3) Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties. 4) Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK. For Windows XP 1) Click “Start -> Control Panel -> Network and Internet Connections -> Network Connections”. 2) Right-click Wireless Network Connection (or Local Area Connection), and then click Properties. 3) Select Internet Protocol (TCP/IP), and then click Properties. 4) Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK. For Windows 8 1) Move your mouse to the lower right corner and click the Search icon in the Popups. 2) Goto Apps, type Control Panel in the search box and press Enter. 3) Go to “Control Panel -> View network status and tasks > Change adapter settings”. 4) Right-click Ethernet, select Properties. Then double-click Internet Protocol Version 4 (TCP/IPv4). 5) Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK. T2. What can | do if | cannot access the Internet? 1) 2) 3) 4) 5) Check your cables and make sure they are all plugged in correctly, including the telephone line, Ethernet cables and power adapter. Check to see if you can log on to the Web-Management page of the modem router. The default address of the Web-Management page is http://192.168.1.1. If you can, try the following steps. (If you can not, please refer to T1 to configure TCP/IP Properties and then try to access the Internet again.) Consult your ISP and make sure all the VPI/VCI, Connection Type, account username and password are correct. If they are not, please replace them with the correct settings and try again. If you still cannot access the Internet, please restore your modem router to its factory default settings and reconfigure your modem router following the instructions in this QIG. Please contact our Technical Support if the problem still exists. ТЗ. Ном can | restore my modem router's configuration to its factory default settings? Once the modem router is reset, the current settings will be lost and you will need to reconfigure the modem router. We strongly suggest you back up the current settings before resetting the modem router. For more Backup information, please refer to 4.6.3 Firmware on User Guide. With the modem router powered on, use a pin to press and hold the RESET button on the rear panel for 8 to 10 seconds before releasing it. T4. What can | do if | forget my password? Reset the modem router first and then use the default user name and password: admin/admin. For more details about Troubleshooting and 159 Technical Support contact information, please log on to our Technical Support website: http://www.tp-link.com/en/support mE 7 N TP-LINK TECHNOLOGIES CO., LTD. Technical Support № For more troubleshooting help, go to http://www.tp-link.com/en/support/faq To download the latest Firmware, Driver, Utility and User Guide, go to http://www.tp-link.com/en/ For all other technical support, please contact us by using the following details: Global Tel: +86 755 2650 4400 Fee: Depending on rate of different carriers, IDD. E-mail: [email protected] Service time: 24hrs, 7 days a week Malaysia Toll Free: 1300 88 875 465 E-mail: support. [email protected] Service time: 24hrs, 7days a week UK Tel: +44 (0) 845 147 0017 Fee: Landline: 1p-10.5p/min, depending on the time of day. Mobile: 15p-40p/min, depending on your mobile network. E-mail: [email protected] Service time: 24hrs, 7days a week Turkey Tel: 0850 72 444 88 (Turkish Service) Fee: Depending on rate of different carriers. E-mail: [email protected] Service time: 09:00 to 21:00, 7days a week Toll Free: 0800 608 9799(Portuguese Service) E-mail: suporte.bretp-link.com Service time: Monday to Friday,09:00 to 20:00; Saturday, 09:00 to 15:00 Italy Tel: +39 023 051 9020 Fee: Depending on rate of different carriers. E-mail: [email protected] Service time: Monday to Friday, 09:00 to 13:00; 14:00 to 18:00 Indonesia Tel: (+62) 021 6386 1936 Fee: Depending on rate of different carriers. E-mail: [email protected] Service time: Sunday to Friday, 09:00 to12:00; 13:00 to18:00 *Except public holidays Germany / Austria Tel :+49 1805 875 465 (German Service) +49 1805 TPLINK +43 820 820 360 Fee: Landline from Germany: 0.14EUR/min. Landline from Austria: 0.20EUR/min. E-mail: [email protected] Service Time: Monday to Friday, 09:00 to 12:30 and 13:30 to 18:00. GMT+1 or GMT+2 ( DST in Germany) * Except bank holidays in Hesse Australia / New Zealand Tel: NZ 0800 87 5465(Toll Free) AU 1300 87 5465(Depending on 1300 policy.) E-mail: [email protected] (Australia) [email protected] (New Zealand) Service time: 24hrs, 7 days a week Singapore Tel: +65 6284 0493 Fee: Depending on rate of different carriers. E-mail: [email protected] Service time: 24hrs, 7 days a week Ukraine Tel: 0800 505 508 Fee: Free for Landline; Mobile: Depending on rate of different carriers. E-mail: [email protected] Service time: Monday to Friday, 10:00 to 22:00 USA / Canada Toll Free: +1 866 225 8139 E-mail: [email protected](USA) [email protected](Canada) Service time: 24hrs, 7days a week Poland Tel: +48 (0) 801 080 618 +48 223 606 363 (if calls from mobile phone) Fee: Depending on rate of different carriers. E-mail: [email protected] Service time: Monday to Friday, 09:00 to 17:00. GMT+1 or GMT+2 (DST) Switzerland Tel: +41 (0)848 800 998 (German Service) Fee: 4-8 Rp/min, depending on rate of different time. E-mail: [email protected] Service time: Monday to Friday, 09:00 to 12:30 and 13:30 to 18:00. GMT+ 1 or GMT+ 2 (DST) France Tel: 0820 800 860 (French service) Fee: 0.118 EUR/min from France Email: support.fretp-link.com Service time: Monday to Friday, 09:00 to 18:00 *Except French Bank holidays Russian Federation Tel: 8 (499) 754 5560 (Moscow NO.) 8 (800) 250 5560 (Toll-free within RF) E-mail: support.ruetp-link.com Service time: From 9:00 to 21:00 (Moscow time) *Except weekends and holidays in RF www.tp-link.com ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- 150Mbps Wireless N ADSL2+ Modem Router
- Easy to set up
- Secure wireless network
- Supports multiple devices
- Web-based configuration
- LED indicators for status
Frequently asked questions
The default username and password are both "admin".
First, enable wireless on your computer. Then, search for the SSID (network name) of the router and enter the Pre-Shared Key (password) when prompted.
Press and hold the RESET button on the rear panel for 8-10 seconds while the router is powered on.
Make sure all cables are connected correctly and that the ADSL LED is lit. You may also need to consult your ISP to confirm the correct settings.
The User Guide is available on the Resource CD included with the router, or you can download it from the TP-LINK website.