Anonabox The Pro Startup Manual

Anonabox The Pro is a portable VPN and Tor-enabled router that provides secure and private internet access. It allows you to bypass censorship, protect your privacy, and access blocked content. With The Pro, you can connect to a VPN and/or route your traffic over the Tor network wherever you have an internet connection.

PDF

مستند

anon ab x

Startup Guide

2 Startup Guide

Welcome! We’ve been expecting you.

welcome to PRO

PRO at a glance

what’s in the box

what you need

setting up your PRO

Step 1 GETTING STARTED

Step 2 ACCESSING THE USER INTERFACE

Step 3 CONFIGURE WIFI

Step 4 CONNECT TO THE INTERNET

Step 5 CONFIGURE VPN

Step 6 CONFIGURE Tor

tips & troubleshooting

declaration of conformity

anonabox PRO

meet PRO

anonabox PRO

welcome to PRO

Congratulations! In your possession is the

anonabox PRO

- a portable VPN and

Tor-enabled router. Both Tor and VPNs are effective tools for remaining anonymous when browsing online, accessing blocked content, and deterring big data collection and hackers. With PRO, you can access a VPN and/or route your traffic over the Tor network wherever you have an Internet connection. Whether you’re at home, in the office or on the go, set up and use is easy.

what is a VPN?

A VPN, or Virtual Private Network, is an increasingly common privacy and censorship bypassing tool. You can think of a VPN as a tunnel over the Internet, one where all of your traffic is sent encrypted to another point of your choosing. An entity attempting to listen in on your traffic will be able to tell you are using a VPN, but not much else.

VPNs work by routing your Internet traffic through a user-specified server maintained by the VPN provider. This allows the end user to appear as if their traffic is originating from a remote location. This prevents snoopers from being able to discern the proper end user, thus protecting your privacy. Being able to specify a particular server also allows the user to gain access to content that may be systematically blocked locally or otherwise specific only to users within the region of the given server.

what is Tor?

Tor provides many of the same privacy benefits as a VPN, but routes your traffic over a series of volunteer maintained relays all over the world in a random fashion. Using Tor also provides access to .Onion domains, also known as the Deep or

Dark Web.

For more on VPNs and Tor, please visit our website:

https://www.anonabox.com.

Startup Guide

PRO at a glance

Status Indication LED

File Sharing USB Port

WAN Port

(Uplink)

Micro USB

(Power)

Device Reset Port

LAN Port

anonabox PRO

what’s in the box

micro usb power cable anonabox PRO

what you need

Standard Ethernet cable (recommended)

WAN + LAN Connections are available through Ethernet connections. With WiFi uplink, connections can be completely wireless, but we recommend carrying an Ethernet cord for easy and direct access to the User Interface and for added security.

An available USB port

to power anonabox.

4 Startup Guide

getting started

anonabox PRO

setting up your PRO

anonabox PRO is a portable, WiFi–enabled VPN and Tor router. This innovative device will provide security and flexibility of both VPN and Tor. Use VPN and Tor simultaneously or independently. You can connect to a wide range of WiFi devices, or directly through an Ethernet LAN connection. For the novice and professional alike, we’re sure you’ll love your anonabox PRO. Let’s get started!

6 Startup Guide

STEP 1

GETTING STARTED

Plug in your PRO into your computer, or other USB ports, using the provided

USB power cord.

Other power cords may not be compatible. The Status

Indication LED will blink while power is supplied.

Micro USB

(included)

Status Indication LED

Troubleshooting

Returning Users:

If your anonabox does not seem to stay on, try utilizing an

Ethernet LAN connection, or using the reset button (located next to LAN port).

Be sure to only use the supplied power cable. anonabox PRO

setting up your PRO (contin.)

Connect to the PRO

OPTION 1: LAN Connection (Recommended. For WiFi Skip to Option 2)

Connect the PRO to your device with an Ethernet cable via the LAN port.

LAN Port

OPTION 2: Wireless WiFi Connection:

Make sure your device’s WiFi is active and select anonabox-pro from available WiFi networks.

Tue 6:08 PM

Primary User

Wi-Fi: Looking for Networks...

Turn Wi-Fi Off

Home Wi-Fi Network

Neighbor Joe’s Wi-Fi anonabox-pro

* You will not have general Internet access at this point if connecting wirelessly and/or haven’t saved Internet settings.

Startup Guide

STEP 2

ACCESSING THE USER INTERFACE

Open a web browser and go to

http://192.168.19.84:1776

OPTION 1: Returning Users (New Users Skip to Option 2):

Step 3 (Pg11)

OPTION 2: New Users /After a Reset:

You’ll see a yellow box indicating that you do not have an admin password. Click login with a blank password field.

anonabox PRO

setting up your PRO (contin.)

Set Admin Password (Recommended)

Use the ‘System’ tab and select ‘Administration’.

Admin password.

Choose a new password using a combination of letters, numbers, and characters for best security. Make sure you remember this! If you ever forget it, you will need to reset the device to regain access.

Click ‘Save & Apply’. A spinning wheel will briefly appear while your changes are applied to your device.

Congrats! You’re now password protected and in the User Interface. Continue onwards to Step 3. (Pg 11)

10 Startup Guide

STEP 3

CONFIGURE WIFI (RECOMMENDED)

From the User Interface,

use the ‘Network’ drop down and select ‘WiFi’.

Set WiFi Network Name (Optional)

Click the ‘Edit’ button to the right of the SSID anonabox-pro listed in the ‘Wireless

Overview’ section.

anonabox PRO

setting up your PRO (contin.)

Move down the screen to the ‘Interface Configuration’ section.

Under the ‘General Setup’ tab you’ll see a box labelled ESSID. Re-name the network name that your anonabox will broadcast in this field. Recommended defaults are already selected.

Click ‘Save & Apply.’

IMPORTANT:

Users connected wirelessly will need to reconnect to the renamed PRO by selecting the named network from their device’s WiFi/Air

Port.

You do not need to wait for the spinning status wheel to resolve.

Refresh page after connecting to new WiFi name.

Set WiFi Password (Recommended)

From the User Interface,

use the ‘Network’ drop down and select ‘WiFi’.

Click the ‘Edit’ button to the right of your anonabox network.

Move down the screen to the ‘Interface Configuration’ section. Use the ‘Wireless

Security’ tab.

Startup Guide

Select the desired encryption type for your WiFi network connection. We recommend WPA-PSK/WPA2-PSK Mixed Node.

*Two additional fields will appear after selecting your encryption type. We recommend you leave Cipher to the ‘auto’ default unless you are an advanced user.

+++

Set your new WiFi password in the box labelled ‘Key’

using a combination of letters, numbers, and characters for best security.

Make sure you remember this!

Click ‘Save & Apply.’

IMPORTANT:

Users connected wirelessly will need to reconnect to their PRO by selecting the named network from their device’s WiFi/Air Port. You will be prompted for your new password. You do not need to wait for the spinning status wheel to resolve.

Now that you have configured your wireless network settings, it’s time to connect to the Internet. Continue onto Step 4. (Pg 14) anonabox PRO

setting up your PRO (contin.)

STEP 4

CONNECT TO THE INTERNET

Returning Users

, Your anonabox PRO will automatically implement any saved settings, including connecting to saved WiFi connections that are enabled and within range. Check the ‘Wireless Overview’ page for current connectivity or follow these steps to connect to a new wireless network.

IMPORTANT:

Read ‘Maximize Portability’ in the ‘Tips &

Troubleshooting’ section following the setup guidelines. (Pg 24)

PRIVATE BROWSERS:

We recommend using a private browser window for best results. Private browsing is a user-specified mode available within most commonly used web browsers. A quick Internet search should provide adequate instructions for accessing this mode if you are unfamiliar.

OPTION 1:

Ethernet WAN (For WiFi LAN Uplink, Skip on to Option 2) (Pg 15)

Use an Ethernet cable to connect to an existing router or Internet connection using the WAN port on your PRO.

WAN Port

14 Startup Guide

Open a private web browser

to confirm you have an Internet connection.

Congrats, you’re connected to the Internet! Proceed on to Step 5. (Pg 19)

OPTION 2:

Setup WiFi Uplink and Connect to WiFi Internet

From the User Interface,

use the ‘Network’ drop down and select ‘WiFi’.

From the ‘Wireless Overview’ Page, click the ‘Scan’ button to find wireless networks that are within range.

Select the desired network you’d like to connect to by clicking the appropriate ‘Join Network’ button.

Make sure the ‘Replace Wireless Configuration’ box is unchecked.

anonabox PRO

setting up your PRO (contin.)

Specify the ‘WPA pass phrase,’ AKA password, specific to the network you are joining.

*The data shown in the ‘Interface Configuration’ section is auto-populated. Do not change this information or you will not connect successfully to the wireless network you’re joining.

Click ‘Submit’

at the bottom of the page.

Review the ‘Network Info’ and Click ‘Save and Apply.’

Confirm Internet Connectivity

OPTION 1: LAN Connection (For WiFi Skip to Option 2) (Pg 18)

You’ll automaticaly be taken back to the ‘Wireless Overview’ page when using an Ethernet LAN connection. You’ll see the wireless connection you’ve configured and should see a positive status. Open a private web browser and verify Internet connectivity.

If Internet connection is confirmed, proceed on to Step 5. (Pg 19)

Troubleshooting

Use the ‘Network Dropdown’ and select ‘WiFi’.

Startup Guide

Under the Interface Configuration Section,

click on the ‘Wireless Security’ tab.

Confirm and/or re-enter the appropriate password

for the Internet connection in the field labelled ‘Key’.

Click ‘Save & Apply ‘

and re-check connection.

anonabox PRO

setting up your PRO (contin.)

OPTION 2: WiFi Connection

Reconnect to your PRO by selecting the named network from your device’s WiFi/Air Port.

You do not need to wait for the spinning status wheel to resolve.

Open a private web browser

and verify Internet connectivity.

Troubleshooting

If your device’s WiFi/Air Port no longer shows your PRO, or you are unable to reconnect to the PRO, there may have been an error when configuring the Internet connection. You will need to use an

Ethernet cable to connect your device to the PRO via LAN or perform a hard reset to access the User Interface. See Option 1 for LAN troubleshooting. A hard restart will reset the device to defaults, and all steps will need to be performed again.

IMPORTANT:

Read ‘Maximize Portability’ in the ‘Tips & Troubleshooting’ section following the setup guidelines. (Pg 24)

Congrats! You’re connected to the Internet. But wait, don’t you want to connect to your VPN or run Tor? Continue to Step 5 (Pg 19) to configure your

VPN and/or Step 6 to configure Tor. (Pg 21)

18 Startup Guide

STEP 5

CONFIGURE VPN

IMPORTANT:

You will need to be connected to the Internet BEFORE you can activate your VPN. We recommend checking that you are actively using the

VPN service after ANY reconfiguration to the device or change in Internet connectivity as an interruption in Internet service will disable the VPN and it will need to be reactivated.

If you did not connect to the Internet, go back to

Step 4. (Pg 14)

Activate your VPN service account by following the instructions on the included insert.

Use the ‘Services’ tab in the User Interface and select your VPN provider.

Important:

‘OpenVPN’ configuration is intended for advanced users only.

Check with your VPN service provider for configuration support for

‘OpenVPN’ or ‘OpenWRT’ before attempting to configure.

Click the ‘Enable’ box.

Put in your account credentials (user name and password).

Select desired server location.

Click ‘Save & Apply’.

anonabox PRO

setting up your PRO (contin.)

Verify VPN Connection

Check that ‘Yes’ appears next to ‘Started’ in the ‘VPN Status’ section when page refreshes.

‘Public IP’ should reflect the VPN location in about 30 seconds.

Confirm that you were successful. Go to http://whatismyip.com

or http://whatismyipaddress.com

Troubleshooting your VPN connection

Try your VPN account credentials again.

Check your wireless connection and see if you have a positive connection to your

PRO.

Try a different server location.

Some servers may be periodically offline.

Disabling VPN

Use the ‘Services’ tab in the User Interface and select the your VPN service provider.

Unselect the ‘Enable’ box.

Click ‘Save & Apply’.

20 Startup Guide

STEP 6

CONFIGURE TOR

All users will need to activate Tor if this feature is desired. The Tor firewall within the PRO is not maintained after a reboot or power interruption. We recommend re-checking to ensure Tor is active before proceeding to use the

Internet.

Use the ‘Services’ tab in the User Interface and select ‘Tor’

Click ‘Restart Tor’ or ‘Start Tor.’

*Connecting to Tor may take up to 2-5 minutes, depending on the current status of the Tor network.

anonabox PRO

setting up your PRO (contin.)

Check if you’re connected to Tor by navigating to https://check.torproject.org/

You should see this screen:

*You can also verify your connection to Tor by using the ‘Status’ tab in the User

Interface and select ‘Tor’. Under Tor Circuit Status, you should see something like this:

Disconnect the same way, but click ‘Stop Tor’.

22 Startup Guide

tips & troubleshooting

anonabox PRO

FAQ/troubleshooting

Seeing the welcome page, but can’t access the User Interface? Your browser has likely cached this page and you’ve lost your connection to the PRO. If the device does not show as an available network and has power, you will need to connect the PRO to your device via LAN or force reset.

NOTE

: if daisy-chained, or if the PRO was connected via LAN to another device, try unplugging this connection to see if the WiFi appears as an available network in the next 60-90 seconds.

More FAQs may be found online at

anonabox.com

Maximize Portability

If you plan on utilizing PRO’s portability, it’s important to know that PRO will remember previous WiFi configurations. This is useful if you frequent certain locations, but it can also hinder quick access if you leave an old configuration active. Follow these easy steps to make future access to your PRO easy and quick.

Before powering down the PRO, use the ‘Network’ tab and select ‘WiFi’.

From the ‘ Wireless Overview’ screen, find the network you’re currently connected to and click ‘Disable’.

Save your favorite Internet connections in the same manner. Remember to disable any other connection you may have before reconnecting to a saved

Internet connection.

Reconnect by clicking ‘Enable’ when you are back within range of this network.

Startup Guide

NOTE:

If you do not disable your network connection before powering down, the PRO will default to this last configuration. If you are unable to connect to this Internet connection when you try and use the PRO thereafter, the PRO will not broadcast a WiFi network signal and you will be required to access the

User Interface via a LAN Ethernet connection, or will be forced to reset the device to connect wirelessly. If you plug your PRO in and do not see an active indicator light at start-up, this may be a sign that your previous configuration could not be reactivated. We advise getting in the habit of disabling your

Internet connections and carrying a small Ethernet cable.

Update Firmware

We are continually working to keep the PRO up to date of any potential security risks and are always looking to develop additional features and streamline your user experience. New users should follow these steps immediately. To stay abreast of our updates and ensure the best security and user experience, we recommend you periodically check our website for firmware updates.

anonabox PRO

Go to anonabox.com/Updates.

Select your anonabox (PRO).

Read the information and default to instructions online for the latest updates.

Updates usually require you to download the firmware to a computer.

Connect to the PRO User Interface through the computer that you’ve downloaded the updated firmware.

Use the ‘System’ tab and select ‘Backup/Flash Firmware.’

Unselect ‘Keep Settings’.

Use the ‘Choose File’ button and select the firmware file you downloaded.

Click

‘Flash Image’.

Please be patient and give the update 3-5 mins to complete.

Re-establish a WiFi LAN access point

There are many reasons you may find yourself in need of a new LAN access point. If you have lost the WiFi LAN connection and don’t have an Ethernet cable, we recommend resetting the PRO. Otherwise you can proceed as outlined:

Connect via LAN connection with an Ethernet cable to your device. This allows direct access to the User Interface when issues may make connecting wirelessly difficult or impossible.

Startup Guide

Access the User Interface at http://192.168.19.84:1776 .

From the User Interface,

use the ‘Network’ drop down and select ‘WiFi’.

Click the ‘Add’ button above any networks in the status section.

Name your network in the ESSID field.

Make sure ‘Access Point’ is selected in the ‘Mode’ drop down.

Select the LAN box in the ‘Network’ field.

Click ‘Save & Apply’.

anonabox PRO

Other Troubleshooting

anonabox.com is a great resource for common issues. Check here regularly.

Carry an Ethernet cable for connection via LAN. This provides you direct access to the User Interface in case configuration issues disallow access wirelessly.

Reset button. Seriously, this might be your best troubleshooting tool.

Unfortunately, restoring defaults and any configuration will need to be redone.

Depressing the button for 5-10 seconds should suffice.

Email us at

[email protected]

Filesharing and USB Port Use

Uses for the included USB port are truly endless. As such we can not provide documentation for all possible uses. If you are interested in some of the possible uses for this feature please visit our website for the current documentation on how to utilize this advanced feature. If you’re interested in using the USB device for a particular purpose and you can not find adequate support on our website, please feel free to email us at [email protected]. We will try and assist you as best as we can. To you get started:

Plug-in your USB device into the USB port.

Use the ‘System’ tab and select ‘Mount Points.’

Click ‘Add’ and select your device.

Reboot the anonabox PRO if you have any connectivity issues.

Startup Guide

anonabox PRO

30 Startup Guide

delcaration of conformity (FCC)

This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not use harmful interference, and, (2) This device must accept any interference received, including interference that may cause undesired operation.

delcaration of conformity (Europe)

Hereby, anonabox.com, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive

1995/5/EC.

The anonabox logo and any or all images containing and or pertaining to the anonabox product are considered property of anonabox, LLC and may not be used without written expressed permission of anonabox, LLC. Usage of these assets without said permission may be considered a violation of copyright infringement, resulting in possible legal action.

3259 Esplanade Suite #103

Chico, CA 95973 www.anonabox.com

E-Mail: [email protected]

anonabox PRO

anon ab x

مرحباً! أنا روبوت دردشة يعمل بالذكاء الاصطناعي تم تدريبي خصيصًا لمساعدتك في Anonabox The Pro Startup Manual. لقد قمت بمراجعة المستند بدقة ويمكنني مساعدتك في تحديد موقع المعلومات التي تحتاجها بالضبط أو شرح المحتوى بعبارات واضحة و بسيطة. سواء كنت تبحث عن إرشادات حول ميزات معينة أو خطوات استكشاف الأخطاء وإصلاحها أو الاستخدام العام، فلا تتردد في طرح أسئلتك. كلما قدمت المزيد من التفاصيل حول مخاوفك أو احتياجاتك، زادت دقة و فعالية مساعدتي لك!

المساعد يكتب

المساعد غير متصل. يرجى المحاولة مرة أخرى في وقت لاحق.

يبدو أنك وصلت إلى مستند مكتوب بلغات متعددة، بما في ذلك لغة ليست لغتك الأم. يمكنك استخدام الروابط التالية لإخفاء الصفحات مؤقتًا بدون اللغة التي تفضلها.