Quick Guide
EDISION OS mini
EDISION OS mini
EDISION OS mini
EDISION OS mini
+
+
EDISION OS mini - DVB/S2 Tuner
EDISION OS mini - DVB/S2 Tuner + DVB/S2 Tuner
EDISION OS mini - DVB/S2 Tuner + DVB/C/T2
EDISION OS mini - DVB/C/T2
- MPEG-4, H.264 & MPEG-2 Compliant
- Dual Core 750 MHz (2000 DMIPS) BCM7362 Processor - 512 MB DDR3 DRAM /
512 MB NAND Flash Memory / 4MB Serial NOR Flash Memory (for boot loader)
- Linux Operating System
- 10/100 Mbps Full Duplex Ethernet Interface
- 1x Smart Card Reader
- 2x USB 2.0 Port (1x in der Front & 1x Rear)
- DV-OUT & Component Line Out
- unlimited Channel Memory
- Super Sensitive Tuner
- S/PDIF Output for Digital Audio and Dolby AC-3 Bit Stream Output
- Firmware/ Software Upgrade: Through (Ethernet, USB Memory Stick)
- multi-Language OSD Menus
- user Friendly EPG (Electronic Program Guide)
- external Power Supply
- very low standby power consumption (<0.5W)
ACCESSORIES
Please check that the following contents are enclosed :
3.5mm to DB9 Serial Cable
3.5mm to RCA Cable
2 BATTERIES
Power Supply
Quick Start Guide
Remote control unit
VIEWS
1 2
4
3
Front view:
1. Power Button Switch between operation and standby modes
2. Display current menu information and channel name etc.
3. USB Connect to the External HDD or USB storage with USB cable. (Max. 500mA)
4. Smart card reader. To insert smart card
Rear View
Edision OS mini DVB-S2
9.
5.
6.
7.
8.
3.
4.
1.
2.
LNB1 INPUT 1st satellite tuner input from the LNB on a dish antenna. Turn the receiver OFF first before connecting
Loop Out. Only channels with the same
Polarisation (horizontal / vertical) and in the same
Frequency band are considered (low / high)
DVB-T2 / DVB-C Line IN
DVB-T2 / DVB-C Antennas Line OUT. Loop Out
Line OUT 3.5mm to RCA Cable
DV-OUT
3.5mm to DB9 Serial Cable
S/PDIF Line OUT
Ethernet Communication port via HTTP, FTP, NFS,
Telnet and Samba to access your Hard Drive or to upload channel lists. This is also used to update
Edision OS mini + software
10. USB Connect to the External HDD or USB storage with USB cable (Max. 500mA)
11. External Power Supply
Connect the power Supply (12V / 3.5A)
12. Power Switch. Turn AC Power On/Off
1 5 6 7
Edision OS mini DVB-S2 + DVB-S2
8 9 10 11 12
1 2 1
Edision OS mini DVB-S2 + DVB-C/T2
3 4 1
Edision OS mini DVB-C/T2
5
5
6 7 8 9 10 11 12
6 7 8 9 10 11 12
3 4 5 6 7 8 9 10 11 12
Installation
1. Please refer to the Safety Instruction before powering on the device.
2. Connect Edision OS mini to your TV set using HDMI cable or a RCA cable.
Use an HDMI or Component cable in order to view HD.
3. Connect the coaxial cable (from the satellite dish) to the LNB INPUT of Edision OS mini,
alternatively the aerial cable of your cable network operator or of your DVB T Antenna to the Antenna In Input.
4. Power on the Edision OS mini.
5. After booting up, Initial setup menu comes up for the installation according to your TV settings and
Antenna settings.
REMOTE CONTROL UNIT
Power
Switches between operation and standby
< (PREV)
Return to the previous channel/service or move to the end of the Service List or the Play List
Help
This provides users with a quick guide of using Edision OS mini
Menu
Open main menu & select sub menu using by navigation buttons
EXIT
Close and return to the previous menu and screen
RADIO - TV
Switch to TV mode.
Switch to Radio mode
COLOR BUTTONS
Activates certain menu functions.
Usage instructions are shown in each OSD menu
Audio
Select an audio track and a sound mode
PLAY
Starts timeshift if available
REC
Activates immediately recording-option
NUMERIC KEY (0-9)
Control the numerical operation and change the Channel/Service number directly
> (NEXT)
Go to the next channel/service or move to the beginning of the
Service List or the Play List
TIMER
Start timer function
INFO
Displays the Electronic Program Guide (EPG) information if provided
EPG
Displays the Electronic Program Guide (EPG) information if provided
Mute
Mutes or unmutes the audio temporarily
TEXT
Switch between the teletext and TV modes
SUBTITLE
Display the subtitle language list
SAFETY INSTRUCTIONS
Please read the safety instructions carefully before using the Edision OS mini.
The manufacturer takes no responsibility for incorrect handling of the Edision OS mini.
* For sufficient ventilation, leave enough space.
* If unused for a prolonged amount of time, turn the power OFF.
* Do not cover the Edision OS mini ventilation openings with items such as newpapers, tablecloths, curtains etc.
* Do not expose the Edision OS mini to liquid, moisture, direct sunlight and extreme weather.
* Do not place open flame sources, such as lighted candles, near or on the Edision OS mini.
* Do not place any containers with liquid, such as vases, on the Edision OS mini.
* Do not connect or modify cables while the Edision OS mini is connected to the power.
* Do not remove the cover. Risk of electric shock!
* Do not touch the Edision OS mini with wet hands. Risk of electric shock!
* Do not put any metal items into the slots or ventilation openings.
* Please disconnect your Edision OS mini from the main power during thunder or heavy storms.
* Disconnect the main power cable if the power cord is damaged.
* Cleaning: Disconnect the main power cord before cleaning the cover. Use a slightly damp cloth without cleaning agents.
* Connect the Edision OS mini only to suitable sockets. Do not allow overloads to occur.
WARNING!
* Modifications and changes to the Edision OS mini lead to loss of warranty
* Incorrect software installation leads to loss of warranty.
* This instruction might be modified without prior notice.
DISPOSAL INSTRUCTIONS
1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered
by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream
via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences
for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office,
waste disposal service or the shop where you purchased the product.
