Mitsubishi | City Multi PURY-P-YJM-A-BS | Technical information | Mitsubishi City Multi PURY-P-YJM-A-BS Technical information

City Multi
Energy Efficient VRF Systems
The City Multi range
Solutions for more demanding applications
Efficient &
The City Multi range is Mitsubishi Electric’s answer to large scale
VRF (Variable Refrigerant Flow) applications. The efficiency of City Multi
is second to none and offers a substantial increase in energy efficiency, with
corresponding EER/COP ratings.
The City Multi Y Series range offers a simple and flexible solution where there is a demand for
a changeover capability between heating and cooling, helping to ensure a constant, comfortable
indoor climate.
Mitsubishi Electric also has the ability to provide simultaneous heating and cooling through its R2 and WR2
systems. The difference here being that this is achieved through only two pipes rather than the
conventional three. By using Mitsubishi Electric’s 2-pipe heat recovery technology, substantial savings
can again be made on annual running costs. With a wide range of 76 indoor units, up to 50
(depending on the capacity available) can be connected to a YHM outdoor unit.
Broadening the range of potential City Multi applications is Mitsubishi Electric’s 3rd generation water
cooled R410A WR2 system. This system not only produces heat recovery from the refrigerant circuit
but also via its water circuit, offering double heat recovery potential.
Sophisticated technology, combined with a high level of control and energy efficiency:
City Multi is perfectly positioned to meet the demands of today’s market.
Page 118
flexible
The Strength of City Multi
The R410A YHM-A series offers some of the highest EER/COP
ratings in the market.
The Basics
What is VRF?
VRF stands for Variable Refrigerant Flow. A VRF air conditioning system modulates the flow of
refrigerant depending upon the capacity requirements of the building. A VRF system comprises of a
condensing unit sited externally and a series of multiple indoor units to provide cooling and/or
heating to the occupied space.
Our answer to VRF
Mitsubishi Electric sets the boundaries of VRF technology with the City Multi range, which is available
using R410A refrigerant with zero ODP (Ozone Depletion Potential). The range has been specifically
designed for today's building requirements and addresses key market issues such as energy efficiency,
adaptability and reliability. Mitsubishi Electric manufactures the only 2-pipe heat recovery
simultaneous heating and cooling system in the world and equally unique, a water-cooled version.
With user friendly control systems utilising Internet technology and integrated cooling
and ventilation indoor units, City Multi is the benchmark and market leader in VRF technology.
What is inverter driven technology?
Mitsubishi Electric spends more than 5% of its turnover on research and development, with our
engineers always looking at ways in which we can improve and lead in air conditioning efficiency.
The use of inverter technology in our City Multi systems is paramount in this process, working by
varying the compressor speed to match the cooling or heating load, thereby consuming only the
power necessary to match the exact requirement of the room. When City Multi is operating at
partial load, the energy efficiency of the system is significantly higher than at full load. In a typical
application partial load conditions prevail for more than 90% of operation time. A fixed speed system
can only operate at 100% capacity and cannot match the annual efficiencies of an inverter system
What is a Heat Pump system?
Mitsubishi Electric’s City Multi Y Series, is a heat pump system, which provides either heating or
cooling to a building at any given time.
What is a Heat Recovery system?
Mitsubishi Electric’s City Multi R2 and WR2 series’ have the ability to provide heating and cooling at
the same time in areas connected to the same outdoor unit.
Page 120
Why R410A?
Why Heat Recovery?
R410A is a more efficient refrigerant as it has a higher specific
heat capacity when compared to R407c or R22. This higher
energy carrying capacity allows for smaller pipe sizes, longer pipe
runs and reduces the volume of refrigerant within a system.
Flexibility and efficiency are key factors when selecting a heat
recovery system. For example, while a heat pump system is
adequate for a large open plan office, businesses that have a
more partitioned structure to an office will require the need
to simultaneously heat or cool different sections of the office
according to each users individual preferences.
This is a major factor when complying with EN378, a
European standard concerning safety and environmental
requirements in the design, manufacture, installation,
operation, maintenance and disposal of refrigerating systems.
The efficiency of this type of system comes from the ability to
use the by-products of cooling and heating to transfer energy
where it is required, thus acting as a balanced heat exchanger
achieving up to 20% cost savings over a conventional heat
pump system.
The number of connection sites needed for a R2 / WR2
system are also significantly lower than those needed for a
three pipe version. This helps to reduce installation costs,
further increasing the savings associated with City Multi.
Comparison
example of piping
connection sites
= 2 sites
= 3 sites
How does the R2 / WR2 Heat Recovery System operate
on 2 Pipe’s?
The secret of City Multi heat
recovery systems lies in the
BC Controller
The BC Controller houses a liquid/gas separator, allowing the
outdoor unit to deliver a mixture (2 phase) of hot gas for heating
and liquid for cooling, all through the same pipe. Three pipe systems
allocate a pipe to each of these phases. When this mixture arrives
at the BC Controller, it is separated and the correct phase delivered
to each indoor unit depending on the individual requirement of
either heating or cooling.
Page 121
The technology to make
City Multi the natural choice
Energy efficiency has always been the driver for City Multi technological
development. Technology that always delivers the quality and reliability needed
for commercial air conditioning environments. Mitsubishi Electric spend more
than 5% of their turnover on research and development, with our engineers always
looking at ways in which we can improve and lead in air conditioning efficiency.
City Multi R410A YHM-A technology
Using the ver y latest in IPM (Intelligent Power Module) technology, precise control of
energy input is achieved allowing City Multi to fur ther improve COPs for R410A systems.
IPM uses 1Hz steps of capacity control, matching building requirements through more accurate
control of the occupied space with reduced power input.
As in previous versions, IPM technology operates extremely effectively under part load conditions
(50-80% of operating capacity), a condition that most systems will be in for their normal working life.
Therefore the consideration of efficiency at part load is accounted for as well as when at peak load
conditions, offering high system efficiency all year round.
Stable and smooth operation - 100% inverter control
All City Multi compressors are inverter-driven - Capable of precisely matching a
building's cooling and heating demands.
The outdoor unit combinations comprise of one module for 8-18hp systems (for R2 up to
16hp), two modules for 20-36hp systems (for R2, 18-32hp) and three modules for 38-50hp
systems (Y series only). Each module carries one inverter compressor making simple and highly
reliable control possible. Not only does it allow low starting currents, the inverter driven
compressor also provides precise indoor comfort and adapts to the air conditioning load,
achieving smooth transition across the range of compressor frequencies.
Y Series 8-18hp / R2 8-16hp
Page 122
Y Series 20-36hp / R2 18-32hp
Y Series 38-50hp
Heat Interchange Circuit
To further enhance the class leading efficiency of City Multi, the unique Heat
Interchange Circuit provides extra sub cooling. This system allows optimum
refrigerant distribution to multiple indoor units, by allowing more effective
use of refrigerant flowing through the electronic expansion valves.
Because of the added efficiency, volumes of refrigerant in systems are
continuing to reduce.
The difference between
YHM-A and previous
Mitsubishi Electric models
Technology is key when increased
efficiency is demanded. The City Multi
YHM-A range is designed to deliver this.
A highly efficient R410A scroll compressor
design results in less friction losses at the motor.
A simplified refrigerant circuit (low pressure loss)
including new accumulator design also adds a
few more points to the efficiency scale.
CITY MULTI
REFRIGERANT
CIRCUIT
NORMAL
REFRIGERANT
CIRCUIT
Enhancements to the heat interchange circuit,
inverter driven fan motor and heat exchanger
design, again add vital increases to overall system
efficiency and COPs.
Total Energy
Conser vation
The importance of COP
Total Energy Conservation
COP stands for “Co-efficient of Performance”. It is a measure of the
useful energy a system can deliver compared to the energy that
it consumes. It is calculated by dividing the energy output by
the energy input of a system. The higher the figure then the more
efficient the system is deemed to be, with commensurate reduced
running costs.
Comparison of COP (energy efficiency)
of an 8hp YHM-A system.
For Heat Pumps to be included on the Energy Technology Product List
under the Enhanced Capital Allowance scheme, they must achieve a
heating COP of 3.4 and a cooling EER (energy efficiency ratio) of 3.0.
Therefore every input of 1kW of energy must deliver an output
of 3.4kW for heating and 3.0kW for cooling, achieving an energy
label of B.
Page 123
Ground Source
Heat Pumps
A very efficient source of energy for water source heat pump systems is the Earth
itself. Ground source heat pumps use the Earth's natural solar collection and heat
storage capabilities as an infinite heat source/heat sink.
At between 1.7m and 3m below the ground, the temperature changes from 17ºC in the summer to 10ºC in the winter.
Deeper down however, the temperature of the ground is a constant 10ºC all year round. It is these relatively constant,
dependable temperatures that can be harnessed using ground source heat pumps.
The constant ground temperatures allow the heat pump to operate at optimum efficiency in both heating and cooling,
as the high summer or low winter temperatures do not influence performance. Heat is extracted or
rejected into the ground using water which is pumped through a network of plastic pipes.
There are two standard ground source methods available,
Open Loop and Closed Loop (Bore Hole or Slinky):
I
Open Loop - Large bodies of water can be utilised as a stable source of water at a
relatively constant temperature. This can be either surface water or ground water.
Surface water would include lakes, reservoirs, rivers and the sea.
I
Closed Loop Slinky - A trench is dug to a depth of between 1.7 to 3m and plastic
spiral pipe is laid into the bottom. The pipe is covered with sand to provide good ground
to pipe contact and then the trench is backfilled with the excavated soil.
I
Closed Loop Bore Hole - A series of holes are drilled down into the ground at a depth
of 50 to 130m, depending on geothermal conditions. Two water pipes connected via a 'u bend'
are fed directly into these holes and then surrounded by a conductive grout.
Example of a Closed Loop
Bore Hole Application:
Indoor units provide heating or cooling
Ground Source Heat Pump installed inside
the building, typically 1 per floor
Flow and return water loop supplies
water to and from the units
Bore Hole absorbs or rejects heat from the ground
Page 124
Highly eff icient &
extremely flexible
New Acoustic Kits for PUHY
and PURY Series units
A range of Acoustic Kits designed for noise reduction.
An industry first, the kits offer a 6dBA noise level
reduction from standard.
For supply and / or installation please contact
Ambient Acoustics on 01934 712802
Page 125
Features and
High off coil / High sensible cooling
Poor design or application of air conditioning systems can sometimes lead to cold draughts and
uneven room temperatures. Low off coil temperatures cause dehumidifying of the air which can
create dry eyes and sore throats.
Mitsubishi Electric now provides a High Sensible Cooling Function specifically designed to deal with
this. By raising the off coil temperature, a 10% increase in sensible cooling capacity over standard
operation is achievable, the result being greater comfort for occupants. These high SHF’s are available
throughout the range of indoor units, allowing optimum selection of units tailored to more specific
design criteria.
Reduced noise levels
New fan design
City Multi VRF systems led the introduction of larger single fan rotors some ten years ago, achieving
substantially lower noise levels over multiple designs. Continuing the development in the areas of blade
shape and weight, Mitsubishi Electric have managed to achieve even higher performance and lower
noise levels.
To reduce noise levels further and comply with inner city residential noise regulations, all outdoor units
include Night Set-back mode. This function works by lowering the fan speed and compressor
frequency proportionally with reduction in demand (44dBA for PUHY-P250YHM-A). The compressor
compartment is also now sealed, further reducing noise levels.
New fan design
Reduction of operation noise
New control box design
Improvement of reliability
and easy maintenance
New heat exchanger design
Improvement of COP
New inverter compressor
Improvement of COP
Page 126
Benefits
Fine Control of the Inverter Provides
Better Efficiency and Performance
Air cooled inverters use the ambient temperature to cool the inverter. For water cooled VRF (which
are installed inside the building) refrigerant cooling is used to maintain accurate control of the Inverter.
Refrigerant volume checking function
This function runs the system, measuring various temperatures and pressures throughout the
system, comparing these to the values stored in the units memory from the previous service.
If a leakage has occurred the system will indicate so, enabling customers to easily comply with
the F-Gas regulation.
Replace technology
This unique function allows the re-use of refrigerant piping, controllers, power and control
wiring for all previously installed Mitsubishi Electric R22 and R407c Heat Recovery and Cooling
only systems and partial replace of Heat Pumps (pressure regulations require one pipe from
the outdoor to the first branch to be replaced). This function offers unprecedented savings on
installation costs, disruption to business and down time, not to mention the considerable
running cost and CO2 emission savings - more than halving the running costs compared to a
10 year old unit.
Cooling operation set temperature of 14ºC
Environments such as gyms, laboratories etc often require the ability to cool lower than the standard
comfort cooling setpoint. By selecting a dip switch on the unit, a cooling operation set
temperature of 14ºC DB is possible on the floor standing and ducted models only. The indoor
unit fan will be fixed at high speed during this operation.
Page 127
Effective use of space
The new models have a smaller foot print requirement than previous models. The width and depth
have been reduced by 7% and 13% respectively, with the height being reduced by 130mm.
(PUHY-P250YHM-A compared to previous YGM-A versions).
YGM-A
mm
8-12hp systems (Y / R2 Series)
1.43m2
14-18hp systems (Y Series)
14-16hp systems (R2 Series)
1.89m2
YHM-A
Approximately 21% reduction in foot print
(PUHY-P250)
The unit can easily be transported, even into inaccessible buildings
The narrow space between buildings
makes it difficult to use a crane
The downsized outdoor unit can be transported through an 800mm wide lift door
8-12hp outdoor units
Example of lift
Weight reduction
Weight has been reduced
by approximately 33kg
33kg
(PUHY-P250YHM-A
compared to previous
YGM-A versions).
YGM-A
Page 128
YHM-A
Blue Fin treatment
The anti-corrosion Blue Fin treatment of the heat exchanger is especially effective in urban
environments where the traffic pollutions can damage the aluminium fins reducing
the capacity and life expectancy of the unit.
All City Multi R410A outdoor units
have been treated with Blue Fin
R410A pipe sizing
As R410A has a higher specific heat capacity
than R22, the pipework is smaller. This means
the pipe itself is cheaper, easier to install and
less riser space is required within the building.
10hp model
Constant & comfortable
indoor climates
Heating operation range Air cooled units
At low ambient temperatures the guaranteed operating
range in heating is minus 20ºC
Water temperature
operation range WR2 / WY Water cooled units
Operating range in cooling is from an outdoor
temperature of -5ºC.
Outdoor Temperature (ºC)
Water Temperature (ºC)
Page 129
City Multi exceeds
current demands
for Efficiency
The need for energy efficiency is paramount and is determined by legislation and regulation.
Businesses saw their energy bills rise by up to 15% with the introduction of the Climate Change
Levy in April 2001. A year later, the newly revised Par t L (Par t J in Scotland) of the building
regulations placed new standards on design of buildings and plant deployed for heating, cooling and
ventilating. A revised version to conform with the Energy Performance of Buildings Directive was also
introduced in 2006; all geared to reducing energy consumption and therefore CO2 emissions.
To encourage efficient use of energy, the UK Government introduced the Enhanced Capital
Allowance Scheme (ECA). Qualifying products on the Energy Technology Product List include heat
pumps for space heating. The City Multi range has been designed to ensure businesses qualify for
ECA and benefit from the utmost efficiency, both financially and environmentally.
Mitsubishi Electric has produced a series of comprehensive CPD approved guides.
These include:
I
The Energy Performance of Buildings Directive (EPBD)
I
Mixed Mode Cooling Systems
I
Building Energy Management Systems (BEMS)
I
Water Cooled VRF Systems
I
The European F-Gas Regulation
I
The New Part L of the Building Regulations 2006
I
The New 10% Renewable Energy Target
I
Heat Pump Boilers
I
Part F of the Building Regulations
I
The Code for Sustainable Homes
I
Building Energy Ratings
I
Renewable Energy Sources
I
Maintenance, Replacement and the WEEE Directive
I
Combined Heat and Power
I
Carbon Reduction in the Built Environment
I
The Application of Heat Pump Boilers
I
The Enhanced Capital Allowance Scheme (2008)
Page 130
Enhanced Capital
Allowance Scheme (ECA)
The key features of the scheme:
I Under the scheme, all businesses liable for UK corporation tax, are able to claim an enhanced capital allowance on any
qualifying expenditure (regardless of size and location of business or whether in the industrial or commercial sector)
I Businesses can offset the full cost of specific technologies (such as City Multi) against taxable profits
of the period of the investment
I In order to qualify for this scheme, technology has to meet the energy saving criteria as published in the Energy Technology
Criteria List. City Multi fully meets this criteria in its drive for energy efficiency
I Only investment in new and unused plant and machinery qualify
For further information go to www.eca.gov.uk and click on
Mitsubishi Electric Air Conditioning under the heat pump category.
Page 131
A wide choice of models
The new YHM-A air sourced outdoor models are modular in design and as such differing
combinations of them can be connected together to create the required outdoor unit size needed
for a particular application.
Both the Y Series and R2 ranges come in standard (-P) and high COP (-EP) versions. In addition, the standard versions
allow for space-saving by virtue of the combination of units having a smaller foot print than the high COP versions.
The model line up
Size
200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100 1150 1200 1250
Series Model Name
Y
8hp
I
PUHY-P YHM-A
PUHY-EP YHM-A
R2
I
I
I
I
I
PURY-P YHM-A
PURY-EP YHM-A
10hp 12hp 14hp 16hp 18hp 20hp 22hp 24hp 26hp 28hp 30hp 32hp 34hp 36hp 38hp 40hp 42hp 44hp 46hp 48hp 50hp
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Y Series Heat Pump - Standard Version
Y Series (10-12hp) PUHY-P YHM-A
Y Series (14 - 18hp) PUHY-P YHM-A
Y Series (20 - 26hp) PUHY-P YSHM-A
10hp
12hp
14hp
16hp
18hp
PUHY-P250YHM-A
PUHY-P300YHM-A
PUHY-P350YHM-A
PUHY-P400YHM-A
PUHY-P450YHM-A
Y Series (28-36hp) PUHY-P YSHM-A
Y Series (38 - 40hp) PUHY-P YSHM-A
20hp
22hp
24hp
Y Series (42hp) PUHY-P YSHM-A
28hp
30hp
32hp
38hp
40hp
42hp
PUHY-P700YSHM-A
PUHY-P750YSHM-A
PUHY-P800YSHM-A
PUHY-P950YSHM-A
PUHY-P1000YSHM-A
PUHY-P1050YSHM-A
34hp
36hp
PUHY-P850YSHM-A
PUHY-P900YSHM-A
26hp
PUHY-P500YSHM-A PUHY-P550YSHM-A PUHY-P600YSHM-A PUHY-P650YSHM-A
Y Series (44-50hp) PUHY-P YSHM-A
44hp
46hp
48hp
50hp
PUHY-P1100YSHM-A PUHY-P1150YSHM-A PUHY-P1200YSHM-A PUHY-P1250YSHM-A
Page 132
Y Series Heat Pump - High COP Version
Y Series - High COP (8 - 12hp) PUHY-EP YHM-A
8hp
12hp
PUHY-EP200YHM-A
PUHY-EP300YHM-A
Y Series - High COP (28 - 30hp) PUHY-EP YSHM-A
Y Series - High COP (16 - 20hp) PUHY-EP YSHM-A
18hp
16hp
PUHY-EP400YSHM-A PUHY-EP450YSHM-A
Y Series - High COP (22 - 26hp) PUHY-EP YSHM-A
20hp
22hp
PUHY-EP500YSHM-A
PUHY-EP550YSHM-A
Y Series - High COP (32 - 34hp) PUHY-EP YSHM-A
26hp
24hp
PUHY-EP600YSHM-A PUHY-EP650YSHM-A
Y Series - High COP (36hp) PUHY-EP YSHM-A
28hp
30hp
32hp
34hp
36hp
PUHY-EP700YSHM-A
PUHY-EP750YSHM-A
PUHY-EP800YSHM-A
PUHY-EP850YSHM-A
PUHY-EP900YSHM-A
R2 Series Heat Recovery - Standard Version
R2 Series (10 - 12hp) PURY-P YHM-A
R2 Series (14 - 16hp) PURY-P YHM-A
R2 Series (18 - 24hp) PURY-P YSHM-A
10hp
12hp
14hp
16hp
20hp
22hp
24hp
PURY-P250YHM-A
PURY-P300YHM-A
PURY-P350YHM-A
PURY-P400YHM-A
PURY-P500YSHM-A
PURY-P550YSHM-A
PURY-P600YSHM-A
R2 Series (26 - 28hp) PURY-P YSHM-A
R2 Series (30 - 32hp) PURY-P YSHM-A
26hp
28hp
30hp
32hp
PURY-P650YSHM-A
PURY-P700YSHM-A
PURY-P750YSHM-A
PURY-P800YSHM-A
R2 Series Heat Recovery - High COP Version
R2 Series - High COP (8 -12hp) PURY-EP YHM-A
R2 Series - High COP (16 - 18hp) PURY-EP YSHM-A
R2 Series - High COP (20 - 22hp) PURY-EP YSHM-A
8hp
12hp
16hp
18hp
20hp
22hp
PURY-EP200YHM-A
PURY-EP300YHM-A
PURY-EP400YSHM-A
PURY-EP450YSHM-A
PURY-EP500YSHM-A
PURY-EP550YSHM-A
R2 Series - High COP (24hp) PURY-EP YSHM-A
24hp
PURY-EP600YSHM-A
Page 133
City Multi Product Range Overview
Outdoor Units
14kW Cooling Capacity
Y Series (4/5/6hp)
WY / WR2
WY / WR2
PUMY-P100-140V/YHMA
PQ(H/R)Y-P200/250YGM-A
PQ(H/R)Y-P400/500YSGM-A
Indoor Units
Model / Size
PLFY-P-VBM-E
PLFY-P-VCM-E
PLFY-P-VLMD-E
PMFY-P-VBM-E
PEFY-P-VMS1-E
PEFY-P-VMM-E
PEFY-P-VMH-E
PCFY-P-VGM-E
PKFY-P-VBM/VGM/VFM-E
PFFY-P-VLRM-E
PFFY-P-VLRMM-E
PFFY-P-VLEM-E
PFFY-P-VKM-E
GUF-RD3
PQFY-P
Page 134
15
(1.7kW)
20
(2.2kW)
25
(2.8kW)
32
(3.6kW)
40
(4.5kW)
140kW Cooling Capacity
Y / R2 Series Standard
Y / R2 Series High COP
Y / R2 Series Standard
Y / R2 Series High COP
PUH/RY-P250/300YHM-A
PUH/RY-EP200YHM-A
PUH/RY-P350-450YHM-A*1
PUH/RY-EP300YHM-A
50
(5.6kW)
63
(7.1kW)
80
(9.0kW)
100
(11.2kW)
125
(14.0kW)
140
(16.0kW)
250
(28.0kW)
*1 Size 450 only available for Y Series
Page 135
The energy efficient
City Multi VRF range
Unique 2-pipe technology provides
simultaneous heating and cooling, alongside excellent energy
efficiency and corresponding EER/COP
ratings. Up to 50 indoor units can be connected to a single
outdoor unit, offering the sophistication,
control and energy efficiency
demanded today.
Simple technology
at its best
Systems marked with the ECA logo are registered on the Energy Technology List and
hence qualify for 100% first year enhanced capital allowances (whole system cost and
‘reasonable’ cost of installation). For further information please go to www.eca.gov.uk
Nominal conditions cooling: indoor 27˚C DB, 19˚C WB; outdoor 35˚C DB, 24˚C WB.
Nominal conditions heating: indoor 20˚C DB; outdoor 7˚C DB, 6˚C WB.
UK Conditions: Summer; indoor 21˚C DB, 15˚C WB; outdoor 27˚C DB. Winter; indoor 21˚C DB; outdoor -1˚C WB.
Page 136
Contents
138
Y Series (4-6hp) Heat Pump, Outdoor Unit
140
Y Series Standard (10-18hp) Heat Pump, Outdoor Unit
142
Y Series Standard (20-36hp) Heat Pump, Outdoor Unit
144
Y Series Standard (38-50hp) Heat Pump, Outdoor Unit
146
Y Series High COP (8-26hp) Heat Pump, Outdoor Unit
148
Y Series High COP (28-36hp) Heat Pump, Outdoor Unit
150
WY Series (8-20hp) Water Cooled Heat Pump, Outdoor Unit
152
R2 Series Standard (10-16hp) Heat Recovery, Outdoor Unit
154
R2 Series Standard (20-32hp) Heat Recovery, Outdoor Unit
156
R2 Series High COP (8-24hp) Heat Recovery, Outdoor Unit
158
R2 Series Piping Restrictions
160
WR2 Series (8-20hp) Water Cooled Heat Recovery, Outdoor Unit
162
PFD-P-VM-E Heat Pump, Close Control System
164
PLFY-P-VBM-E 2, 3 and 4-Way Blow Ceiling Cassette Indoor Unit
166
PLFY-P-VCM-E 600x600 4-Way Blow Ceiling Cassette Indoor Unit
168
PLFY-P-VLMD-E 2-Way Blow Ceiling Cassette Indoor Unit
170
PMFY-P-VBM-E 1-Way Blow Ceiling Cassette Indoor Unit
172
PEFY-P-VMS1-E Ultra Thin Ceiling Concealed Ducted Indoor Unit
174
PEFY-P-VMM-E Ceiling Concealed Ducted Indoor Unit
176
PEFY-P-VMH-E High Static Pressure Ceiling Concealed Ducted Indoor Unit
178
PCFY-P-VGM-E Ceiling Suspended Indoor Unit
180
PKFY-P-VBM/VGM/VFM-E Wall Mounted Indoor Unit
182
PFFY-P-VLRM-E Floor Standing Concealed Indoor Unit
184
PFFY-P-VLRMM-E Floor Standing Concealed Indoor Unit
186
PFFY-P-VLEM-E Floor Standing Exposed Indoor Unit
188
PFFY-P-VKM-E Floor Standing Exposed Indoor Unit
190
GUF-RD3 Lossnay Outdoor Air Processing Unit
192
PQFY-P VRF Heat Pump Boiler
194
BC Controllers
196
Air Handling Unit Controllers
197
Accessories / Optional Extras
Page 137
Y Series (4-6hp)
Heat Pump Outdoor Unit
The latest in Mitsubishi Electric R410A Y Series technology. The new City Multi models allow up to
8 indoor units to be connected to a single outdoor unit, using the standard branch/header pipework system
proven in the larger models. Utilising the latest Mitsubishi Electric inver ter technology,
the system is fully controllable with all City Multi controllers or linked to third party BEMS.
I
A two core non-polar transmission line allows for simple
installation of up to eight indoor units
I
Latest in inverter technology including a highly efficient
DC Scroll Compressor, DC fan motor and Demand Control
I
The condensing unit is extremely slimline which allows easy location
and application of the system
I
Single or three phase power supply
I
Anti-Corrosion blue and flat fin technology
I
Size 15 PEFY-P-VMS1-E now able to connect to PUMY
Technical Information
Y SERIES OUTDOOR UNIT - 4-6hp
MODEL REFERENCE
CAPACITY (kW)
POWER INPUT (kW)
PUMY-P100VHMA PUMY-P100YHMA PUMY-P125VHMA PUMY-P125YHMA PUMY-P140VHMA PUMY-P140YHMA
Heating (nominal)
Cooling (nominal)
Heating (UK)
Cooling (UK)
Heating (nominal)
Cooling (nominal)
Heating (UK)
Cooling (UK)
COP / EER (nominal)
Max no. OF CONNECTABLE INDOOR UNITS
Max CONNECTABLE CAPACITY
AIRFLOW (m3/min)
PIPE SIZE mm(in)
Gas
Liquid
NOISE (dBA)
Heating/Cooling
WEIGHT (kg)
DIMENSIONS (mm)
Width
Depth
Height
ELECTRICAL SUPPLY
PHASE
STARTING CURRENT (A)
RUNNING CURRENT (A)
Heating
Cooling
GUARANTEED OPERATING RANGE
Cooling
Heating
FUSE RATING (BS88) - HRC (A)
MAINS CABLE No. Cores
12.5
11.2
10.4
10.3
3.66
3.34
3.27
2.84
3.42 / 3.35
6
14.5 (130%)
100
15.88 (5/8”)
9.52 (3/8”)
51 / 49
127
950
330+30
1350
220-240v, 50Hz
Single
5
15.5
14.1
-5ºC ~ 46ºC
-15ºC ~ 15ºC
40
3
12.5
11.2
10.4
10.3
3.63
3.3
3.23
2.81
3.44 / 3.39
6
14.5 (130%)
100
15.88 (5/8”)
9.52 (3/8”)
51 / 49
140
950
330+30
1350
380-415v, 50Hz
3
5
5.32
4.84
-5ºC ~ 46ºC
-15ºC ~ 15ºC
16
4 + earth
16.0
14.0
13.3
12.9
4.33
4.32
3.85
3.66
3.69 / 3.24
8
18.2 (130%)
100
15.88 (5/8”)
9.52 (3/8”)
52 / 50
127
950
330+30
1350
220-240v, 50Hz
Single
5
18.3
18.3
-5ºC ~ 46ºC
-15ºC ~ 15ºC
40
3
16.0
14.0
13.3
12.9
4.29
4.27
3.82
3.63
3.73 / 3.28
8
18.2 (130%)
100
15.88 (5/8”)
9.52 (3/8”)
52 / 50
140
950
330+30
1350
380-415v, 50Hz
3
5
6.29
6.26
-5ºC ~ 46ºC
-15ºC ~ 15ºC
16
4 + earth
18.0
15.5
14.9
14.3
5.58
5.35
4.99
4.53
3.23 / 2.90
8
20.2 (130%)
100
15.88 (5/8”)
9.52 (3/8”)
53 / 51
127
950
330+30
1350
220-240v, 50Hz
Single
5
23.6
22.7
-5ºC ~ 46ºC
-15ºC ~ 15ºC
50
3
18.0
15.5
14.9
14.3
5.32
5.32
4.73
4.52
3.38 / 2.91
8
20.2 (130%)
100
15.88 (5/8”)
9.52 (3/8”)
53 / 51
140
950
330+30
1350
380-415v, 50Hz
3
5
7.8
7.8
-5ºC ~ 46ºC
-15ºC ~ 15ºC
16
4 + earth
Optional Parts
PUMY-P100-140VHMA/YHMA Piping Restrictions
TOTAL PIPING LENGTH
FURTHEST PIPING LENGTH
FURTHEST PIPING LENGTH AFTER 1st BRANCH
BETWEEN INDOOR AND OUTDOOR UNITS - HEIGHT
BETWEEN INDOOR AND INDOOR UNITS - HEIGHT
Page 138
120m max
80m max
30m max
30m max (20m max if outdoor installed below)
12m max
Model Name
Description
CMY-Y62-G-E
Branch Pipe (2 Branch)
PUMY-P100-140VHMA/YHMA
Upper View
>
Front View
>
Y Series (4-6hp)
Side View
>
City Multi Range 2008
Dimensions
Page 139
Y Series Standard (10-18hp)
Heat Pump Outdoor Unit
Improved for even higher efficiency
The City Multi Y series makes use of a two pipe refrigerant circuit throughout, with
the choice of either Branch Pipe or Header Pipe feeds to indoor units, with manual
changeover from cooling to heating to ensure that a constant indoor climate is maintained.
I
New wrap around coil for improved energy efficiency
I
Choice of Branch Pipe or Header Pipe feeds to indoor units
I
Energy-saving inverter driven outdoor compressor units with very
low start currents
I
No requirement for plant rooms or bulky service shafts
I
Weight and size reduction compared to previous YGM-A models
I
Improved pipe run of 165m, with a total system pipe length of 1000m
I
100% inverter control
I
High Sensible Cooling Function - By raising the off coil temperature, a 10%
increase in sensible cooling capacity over standard operation is achievable,
the result being greater comfort for occupants
Technical Information
Y SERIES STANDARD OUTDOOR UNITS 10-18hp
MODEL REFERENCE
CAPACITY (kW)
POWER INPUT (kW)
PUHY-P250YHM-A
PUHY-P300YHM-A
PUHY-P350YHM-A
PUHY-P400YHM-A
PUHY-P450YHM-A
Heating (nominal)
31.5
37.5
45.0
50.0
56.0
Cooling (nominal)
28.0
33.5
40.0
45.0
50.0
Heating (UK)
28.7
33.0
39.6
44.0
48.7
Cooling (UK)
26.6
31.5
37.6
42.3
46.0
Heating (nominal)
7.83
9.39
12.09
13.47
15.38
Cooling (nominal)
7.73
9.07
11.20
13.23
16.28
Heating (UK)
7.75
9.11
11.73
13.07
14.00
Cooling (UK)
4.79
6.71
8.29
9.79
11.40
4.02 / 3.62
3.99 / 3.69
3.72 / 3.57
3.71 / 3.40
3.64 / 3.07
COP/EER (nominal)
MAX No. OF CONNECTABLE INDOOR UNITS
21
26
30
34
39
AIRFLOW (m3/min)
185
185
225
225
225
High
NOISE (dBA)
57
59
60
61
62
WEIGHT (kg)
200
215
245
245
245
Width
920
920
1220
1220
1220
Depth
760
760
760
760
760
Height
1710
1710
1710
1710
1710
DIMENSIONS (mm)
(1650mm without legs)
ELECTRICAL SUPPLY
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
PHASE
3
3
3
3
3
STARTING CURRENT (A)
8
8
8
8
8
Heating
12.1
14.5
18.6
20.8
23.7
Cooling
11.9
14.0
17.3
20.4
25.1
32
32
32
40
50
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
RUNNING CURRENT (A)
FUSE RATING (MCB sizes BS EN 60947-2) - (A)
MAINS CABLE No. Cores
PUHY-P250-450YHM-A Piping Restrictions
TOTAL PIPING LENGTH
1000m max
FURTHEST PIPING LENGTH
165m max
FURTHEST PIPING LENGTH AFTER 1st BRANCH
40m max
BETWEEN INDOOR AND OUTDOOR UNITS - HEIGHT
50m max (40m max if outdoor installed below)
BETWEEN INDOOR AND INDOOR UNITS - HEIGHT
15m max
Page 140
Side View
Upper View
>
Front View
PUHY-P350, 400, 450YHM-A
Side View
>
Upper View
Front View
>
>
>
>
Y Series Standard (10-18hp)
PUHY-P250, 300YHM-A
City Multi Range 2008
Dimensions
Page 141
Y Series Standard (20-36hp)
Heat Pump Outdoor Unit
Improved for even higher efficiency
The City Multi Y series makes use of a two pipe refrigerant circuit throughout,
with the choice of either Branch Pipe or Header Pipe feeds to indoor units,
with manual changeover from cooling to heating to ensure that a constant
indoor climate is maintained.
I
New wrap around coil for improved energy efficiency
I
Choice of Branch Pipe or Header Pipe feeds to indoor units
I
Energy-saving inverter driven outdoor compressor units with
very low start currents
I
No requirement for plant rooms or bulky service shafts
I
Weight and size reduction compared to previous YGM-A models
I
Improved pipe run of 165m, with a total system pipe length of 1000m
I
100% inverter control
I
High Sensible Cooling Function - By raising the off coil temperature,
a 10% increase in sensible cooling capacity over standard operation
is achievable, the result being greater comfort for occupants
Technical Information
Y SERIES STANDARD OUTDOOR UNITS 20-36hp
MODEL REFERENCE
CAPACITY (kW)
POWER INPUT (kW)
PUHY-P500YSHM-A PUHY-P550YSHM-A PUHY-P600YSHM-A PUHY-P650YSHM-A PUHY-P700YSHM-A PUHY-P750YSHM-A PUHY-P800YSHM-A PUHY-P850YSHM-A PUHY-P900YSHM-A
Heating (nominal)
63.0
69.0
76.5
81.5
88.0
95.0
100.0
108.0
113.0
Cooling (nominal)
56.0
63.0
69.0
73.0
80.0
85.0
90.0
96.0
101.0
Heating (UK)
54.8
60.0
66.6
70.9
75.7
81.7
86.0
95.0
99.4
Cooling (UK)
51.5
58.0
63.5
67.2
73.6
78.2
82.8
88.3
92.9
Heating (nominal)
16.40
18.06
19.92
21.90
23.71
25.46
25.70
28.42
30.29
Cooling (nominal)
16.47
18.36
18.75
20.79
22.47
25.07
27.69
30.18
33.33
Heating (UK)
14.92
16.43
18.13
19.93
22.05
23.68
23.90
26.15
27.87
Cooling (UK)
11.53
12.85
13.13
14.55
16.18
18.05
19.94
19.92
22.00
3.84 / 3.40
3.82 / 3.43
3.84 / 3.68
3.72 / 3.51
3.71 / 3.56
3.73 / 3.39
3.89 / 3.25
3.80 / 3.18
3.73 / 3.03
COP/EER (nominal)
MAX No. OF CONNECTABLE INDOOR UNITS
AIRFLOW (m3/min)
High
43
47
50
50
50
50
50
50
50
185 / 185
185 / 185
225 / 185
225 / 185
225 / 225
225 / 225
225 / 225
225 / 225
225 / 225
NOISE (dBA)
60
60.5
60.5
61
61
63
64
64.5
64.5
WEIGHT (kg)
200 + 200
215 + 200
245 + 200
245 + 215
245 + 245
245 + 245
245 + 245
245 + 245
245 + 245
Width
920 + 920
920 + 920
1220 + 920
1220 + 920
1220 + 1220
1220 + 1220
1220 + 1220
1220 + 1220
1220 + 1220
Depth
760
760
760
760
760
760
760
760
760
Height
1710
1710
1710
1710
1710
1710
1710
1710
1710
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
3
3
3
3
3
3
3
3
3
8/8
8/8
8/8
8/8
8/8
8/8
8/8
8/8
8/8
RUNNING CURRENT (A) Heating
25.3
27.9
30.7
33.8
36.6
39.3
39.7
43.9
46.8
Cooling
25.4
28.3
28.9
32.1
34.7
38.7
42.8
46.6
51.5
32 / 32
32 / 32
32 / 32
32 / 32
32 / 32
40 / 32
50 / 32
50 / 40
50 / 50
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
DIMENSIONS (mm)
(1650mm without legs)
ELECTRICAL SUPPLY
PHASE
STARTING CURRENT (A)
FUSE RATING (MCB sizes BS EN 60947-2) - (A)
MAINS CABLE No. Cores
PUHY-P500-900YSHM-A Piping Restrictions
TOTAL PIPING LENGTH
1000m max
FURTHEST PIPING LENGTH
165m max
FURTHEST PIPING LENGTH AFTER 1st BRANCH
40m max
BETWEEN INDOOR AND OUTDOOR UNITS - HEIGHT
50m max (40m max if outdoor installed below)
BETWEEN INDOOR AND INDOOR UNITS - HEIGHT
15m max
Page 142
PUHY-P500, 550YSHM-A
Side View
>
Front View
>
PUHY-P600, 650YSHM-A
Side View
>
Front View
>
City Multi Range 2008
Dimensions
PUHY-P700, 750, 800, 850, 900YSHM-A
>
Front View
>
Y Series Standard (20-36hp)
Side View
Page 143
Y Series Standard (38-50hp)
Heat Pump Outdoor Unit
Improved for even higher efficiency
The City Multi Y series makes use of a two pipe refrigerant circuit throughout,
with the choice of either Branch Pipe or Header Pipe feeds to indoor units,
with manual changeover from cooling to heating to ensure that a constant
indoor climate is maintained.
I
New wrap around coil for improved energy efficiency
I
Choice of Branch Pipe or Header Pipe feeds to indoor units
I
Energy-saving inverter driven outdoor compressor units with
very low start currents
I
No requirement for plant rooms or bulky service shafts
I
Weight and size reduction compared to previous YGM-A models
I
Improved pipe run of 165m, with a total system pipe length of 1000m
I
100% inverter control
I
High Sensible Cooling Function - By raising the off coil temperature,
a 10% increase in sensible cooling capacity over standard operation
is achievable, the result being greater comfort for occupants
Technical Information
Y SERIES STANDARD OUTDOOR UNITS 38-50hp
MODEL REFERENCE
CAPACITY (kW)
POWER INPUT (kW)
PUHY-P950YSHM-A PUHY-P1000YSHM-A PUHY-P1050YSHM-A PUHY-P1100YSHM-A PUHY-P1150YSHM-A PUHY-P1200YSHM-A PUHY-P1250YSHM-A
Heating (nominal)
119.5
127.0
132.0
140.0
145.0
150.0
156.5
Cooling (nominal)
108.0
113.0
118.0
124.0
130.0
136.0
140.0
Heating (UK)
105.2
111.8
116.2
123.2
127.6
132.0
137.7
Cooling (UK)
99.4
104.0
108.6
114.1
119.6
125.1
128.8
Heating (nominal)
30.02
33.15
35.01
36.93
39.08
40.10
42.06
Cooling (nominal)
30.68
32.47
33.90
35.83
39.39
41.71
45.01
Heating (UK)
27.62
30.50
32.21
33.98
35.95
36.89
38.70
Cooling (UK)
20.25
21.43
22.37
23.65
26.00
27.53
29.71
3.98 / 3.52
3.83 / 3.48
3.77 / 3.48
3.79 / 3.46
3.71 / 3.30
3.74 / 3.26
3.72 / 3.11
COP/EER (nominal)
MAX No. OF CONNECTABLE INDOOR UNITS
AIRFLOW (m3/min)
High
50
50
50
50
50
50
50
185 / 185 / 185
225 / 185 / 185
225 / 225 / 185
225 / 225 / 225
225 / 225 / 225
225 / 225 / 225
225 / 225 / 225
NOISE (dBA)
64
64
64
64
64.5
65
65.5
WEIGHT (kg)
245 + 215 + 200
245 + 215 + 215
245 + 245 + 200
245 + 245 + 245
245 + 245 + 245
245 + 245 + 245
245 + 245 + 245
Width
1220 + 920 + 920
1220 + 920 + 920
1220 + 1220 + 920 1220 + 1220 + 1220
1220 + 1220 + 1220
1220 + 1220 + 1220
1220 + 1220 + 1220
Depth
760
760
760
760
760
760
760
Height
1710
1710
1710
1710
1710
1710
1710
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
3
3
3
3
3
3
3
8/8/8
8/8/8
8/8/8
8/8/8
8/8/8
8/8/8
8/8/8
RUNNING CURRENT (A) Heating
46.4
51.2
54.1
57.0
60.4
61.9
65.0
Cooling
47.4
50.1
52.4
55.3
60.8
64.4
69.5
40 / 32 / 32
40 / 32 / 32
40 / 32 / 32
40 / 32 / 32
50 / 32 / 32
50 / 40 / 32
50 / 50 / 32
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
DIMENSIONS (mm)
(1650mm without legs)
ELECTRICAL SUPPLY
PHASE
STARTING CURRENT (A)
FUSE RATING (MCB sizes BS EN 60947-2) - (A)
MAINS CABLE No. Cores
PUHY-P950-1250YSHM-A Piping Restrictions
TOTAL PIPING LENGTH
1000m max
FURTHEST PIPING LENGTH
165m max
FURTHEST PIPING LENGTH AFTER 1st BRANCH
40m max
BETWEEN INDOOR AND OUTDOOR UNITS - HEIGHT
50m max (40m max if outdoor installed below)
BETWEEN INDOOR AND INDOOR UNITS - HEIGHT
15m max
Page 144
PUHY-P950, 1000YSHM-A
Side View
>
Front View
>
PUHY-P1050YSHM-A
Side View
>
Front View
>
City Multi Range 2008
Dimensions
PUHY-P1100, 1150, 1200, 1250YSHM-A
>
Front View
>
Y Series Standard (38-50hp)
Side View
Page 145
Y Series High COP (8-26hp)
Heat Pump Outdoor Unit
Improved for even higher efficiency
The City Multi Y series makes use of a two pipe refrigerant circuit throughout,
with the choice of either Branch Pipe or Header Pipe feeds to indoor units,
with manual changeover from cooling to heating to ensure that a constant
indoor climate is maintained.
I
Highest ever COP’s / EER’s due to new higher efficiency inverter
technology and wrap around coil
I
Choice of Branch Pipe or Header Pipe feeds to indoor units
I
Energy-saving inverter driven outdoor compressor units
with very low start currents
I
No requirement for plant rooms or bulky service shafts
I
Weight and size reduction compared to previous YGM-A models
I
Improved pipe run of 165m, with a total system pipe length of 1000m
I
100% inverter control
I
High Sensible Cooling Function - By raising the off coil temperature, a 10% increase
in sensible cooling capacity over standard operation is achievable, the result being
greater comfort for occupants
Technical Information
Y SERIES HIGH COP OUTDOOR UNIT 8-26hp
MODEL REFERENCE
CAPACITY (kW)
POWER INPUT (kW)
PUHY-EP200YHM-A PUHY-EP300YHM-A PUHY-EP400YSHM-A PUHY-EP450YSHM-A PUHY-EP500YSHM-A PUHY-EP550YSHM-A PUHY-EP600YSHM-A PUHY-EP650YSHM-A
Heating (nominal)
25.0
37.5
50.0
56.0
63.0
69.0
76.5
81.5
Cooling (nominal)
22.4
33.5
45.0
50.0
56.0
63.0
69.0
73.0
Heating (UK)
23.0
33.0
44.0
48.7
54.8
60.0
66.6
70.9
Cooling (UK)
21.3
31.5
42.3
46.0
51.5
58.0
63.5
67.2
Heating (nominal)
5.77
9.28
11.54
13.05
15.14
17.12
18.93
19.13
Cooling (nominal)
5.18
8.25
10.41
13.15
13.46
16.32
16.99
18.34
Heating (UK)
5.71
9.00
11.19
11.88
13.78
15.58
17.23
17.41
Cooling (UK)
3.21
6.11
7.70
9.21
9.42
11.42
11.89
12.84
4.33 / 4.32
4.04 / 4.06
4.33 / 4.32
4.29 / 3.80
4.16 / 4.16
4.03 / 3.86
4.04 / 4.06
4.26 / 3.98
COP/EER (nominal)
MAX No. OF CONNECTABLE INDOOR UNITS
17
26
34
39
43
47
50
50
AIRFLOW (m3/min)
185
225
185 / 185
185 / 185
225 / 185
225 / 185
225 / 225
225 / 225
High
NOISE (dBA)
57
60
60
60
62
62
63
63
WEIGHT (kg)
200
245
200 + 200
200 + 200
245 + 200
245 + 200
245 + 245
245 + 245
Width
920
1220
920 + 920
920 + 920
1220 + 920
1220 + 920
1220 + 1220
1220 + 1220
Depth
760
760
760
760
760
760
760
760
Height
1710
1710
1710
1710
1710
1710
1710
1710
380-415v, 50Hz
DIMENSIONS (mm)
(1650mm without legs)
ELECTRICAL SUPPLY
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
PHASE
3
3
3
3
3
3
3
3
STARTING CURRENT (A)
8
8
8/8
8/8
8/8
8/8
8/8
8/8
RUNNING CURRENT (A) Heating
8.9
14.3
17.8
20.1
23.4
26.4
29.2
29.5
Cooling
8.0
12.7
16.0
20.3
20.8
25.2
26.2
28.3
20
32
20 / 20
32 / 20
32 / 20
32 / 32
32 / 32
32 / 32
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
FUSE RATING (MCB sizes BS EN 60947-2) - (A)
MAINS CABLE No. Cores
PUHY-EP200-650Y(S)HM-A Piping Restrictions
TOTAL PIPING LENGTH
1000m max
FURTHEST PIPING LENGTH
165m max
FURTHEST PIPING LENGTH AFTER 1st BRANCH
40m max
BETWEEN INDOOR AND OUTDOOR UNITS - HEIGHT
50m max (40m max if outdoor installed below)
BETWEEN INDOOR AND INDOOR UNITS - HEIGHT
15m max
Page 146
PUHY-EP200, 300YHM-A
PUHY-EP200YHM-A schematic is the same as PUHY-P250, 300YHM-A on page 141
PUHY-EP300YHM-A schematic is the same as PUHY-P350, 400, 450YHM-A on page 141
PUHY-EP400, 450YSHM-A
Side View
>
Front View
>
City Multi Range 2008
Dimensions
PUHY-EP500, 550YSHM-A
Side View
>
Front View
>
Side View
>
Front View
Y Series High COP (8-26hp)
PUHY-EP600, 650YSHM-A
>
Page 147
Y Series High COP (28-36hp)
Heat Pump Outdoor Unit
Improved for even higher efficiency
The City Multi Y series makes use of a two pipe refrigerant circuit throughout,
with the choice of either Branch Pipe or Header Pipe feeds to indoor units,
with manual changeover from cooling to heating to ensure that a constant
indoor climate is maintained.
I
Highest ever COP’s / EER’s due to new higher efficiency inverter
technology and wrap around coil
I
Choice of Branch Pipe or Header Pipe feeds to indoor units
I
Energy-saving inverter driven outdoor compressor units
with very low start currents
I
No requirement for plant rooms or bulky service shafts
I
Weight and size reduction compared to previous YGM-A models
I
Improved pipe run of 165m, with a total system pipe length of 1000m
I
100% inverter control
I
High Sensible Cooling Function - By raising the off coil temperature,
a 10% increase in sensible cooling capacity over standard operation
is achievable, the result being greater comfort for occupants
Technical Information
Y SERIES HIGH COP OUTDOOR UNIT 28-36hp
MODEL REFERENCE
CAPACITY (kW)
POWER INPUT (kW)
PUHY-EP700YSHM-A
PUHY-EP750YSHM-A
PUHY-EP800YSHM-A
PUHY-EP850YSHM-A
PUHY-EP900YSHM-A
Heating (nominal)
88.0
95.0
100.0
108.0
113.0
Cooling (nominal)
80.0
85.0
90.0
96.0
101.0
Heating (UK)
75.7
81.7
86.0
95.0
99.4
Cooling (UK)
73.6
78.2
82.8
88.3
92.9
Heating (nominal)
20.00
22.19
23.41
25.59
27.90
Cooling (nominal)
20.99
21.79
22.00
24.67
24.87
Heating (UK)
18.60
20.64
21.77
23.54
25.67
Cooling (UK)
15.11
15.69
15.84
16.28
16.41
4.40 / 3.81
4.28 / 3.90
4.27 / 4.09
4.22 / 3.89
4.05 / 4.06
COP/EER (nominal)
MAX No. OF CONNECTABLE INDOOR UNITS
AIRFLOW (m3/min)
High
50
50
50
50
50
225 / 185 / 185
225 / 185 / 185
225 / 225 / 185
225 / 225 / 185
225 / 225 / 225
NOISE (dBA)
63
63
64
64
65
WEIGHT (kg)
245 + 200 + 200
245 + 200 + 200
245 + 245 + 200
245 + 245 + 200
245 + 245 + 245
Width
1220 + 920 + 920
1220 + 920 + 920
1220 + 1220 + 920
1220 + 1220 + 920
1220 +1220 + 1220
Depth
760
760
760
760
760
Height
1710
1710
1710
1710
1710
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
3
3
3
3
3
8/8/8
8/8/8
8/8/8
8/8/8
8/8/8
Heating
30.9
34.3
36.1
39.5
43.1
Cooling
32.4
33.6
34.0
38.1
38.4
32 / 20 / 20
32 / 32 / 20
32 / 32 / 20
32 / 32 / 32
32 / 32 / 32
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
DIMENSIONS (mm)
(1650mm without legs)
ELECTRICAL SUPPLY
PHASE
STARTING CURRENT (A)
RUNNING CURRENT (A)
FUSE RATING (MCB sizes BS EN 60947-2) - (A)
MAINS CABLE No. Cores
PUHY-EP700-900YSHM-A Piping Restrictions
TOTAL PIPING LENGTH
1000m max
FURTHEST PIPING LENGTH
165m max
FURTHEST PIPING LENGTH AFTER 1st BRANCH
40m max
BETWEEN INDOOR AND OUTDOOR UNITS - HEIGHT
50m max (40m max if outdoor installed below)
BETWEEN INDOOR AND INDOOR UNITS - HEIGHT
15m max
Page 148
PUHY-EP700, 750YSHM-A
Side View
>
Front View
>
PUHY-EP800, 850YSHM-A
Side View
>
Front View
City Multi Range 2008
Dimensions
>
Side View
>
Front View
Y Series High COP (28-36hp)
PUHY-EP900YSHM-A
>
Page 149
WY Series (8-20hp)
Heat Pump, Water Cooled Condensing Unit
The WY Series has all the benefits of the Y Series using water cooled condensing
units. It is also able to produce heat recovery via the water circuit between
heat source units, making for a very economical system.
I
High COPs possible thanks to increased efficiency and careful control of the system,
allowing the largest operational water circuit temperature band ever
I
Combining WY with waste heat energy provides unique application solutions
I
Up to 24 indoor units can be connected to each condensing unit
I
Condensing units can be situated indoors allowing greater design
flexibility and no limitation on building size
I
Single inverter compressor up to 20hp
I
Improved pipe run of 150m with a total system pipe length of up to 300m
I
High Sensible Cooling Function - By raising the off coil temperature,
a 10% increase in sensible cooling capacity over standard operation
is achievable, the result being greater comfort for occupants
I
Now able to operate with closed loop ground source water
temperatures, bore hole and slinky applications are now possible
Technical Information
WY SERIES HEAT SOURCE UNIT - 8-20hp
MODEL REFERENCE
CAPACITY (kW)
POWER INPUT (kW)
PQHY-P200YGM-A
PQHY-P250YGM-A
PQHY-P400YSGM-A
PQHY-P500YSGM-A
Heating (nominal)
25.0
31.5
50.0
63.0
Cooling (nominal)
22.4
28.0
45.0
56.0
Heating (nominal)
4.69
5.80
11.01
13.60
Cooling (nominal)
4.79
5.95
11.35
15.06
MAX No. OF CONNECTABLE INDOOR UNITS
13
16
22
24
NOISE (dBA)
46
47
50
53
WEIGHT (kg)
272
275
208 + 244
208 + 248
Width
990
990
1980
1980
Depth
550
550
550
550
Height
1800
1800
1800
1800
DIMENSIONS (mm)
ELECTRICAL SUPPLY
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
PHASE
3
3
3
3
STARTING CURRENT (A)
8
8
8
8
Heating
7.2
8.9
17.0
21.0
Cooling
7.4
9.1
17.5
23.3
20
25
40
50
4 + earth
4 + earth
4 + earth
4 + earth
RUNNING CURRENT (A)
FUSE RATING (BS88) - HRC (A)
MAINS CABLE No. Cores
PQHY-P200-500Y(S)GM-A Piping Restrictions
TOTAL PIPING LENGTH
300m max
FURTHEST PIPING LENGTH
150m max
FURTHEST PIPING LENGTH AFTER 1st BRANCH
40m max
BETWEEN INDOOR AND OUTDOOR UNITS - HEIGHT
50m max (40m max if outdoor installed below)
BETWEEN INDOOR AND INDOOR UNITS - HEIGHT
15m max
Page 150
PQHY-P200, 250YGM-A
Upper View
Left Side View
>
>
Front View
>
City Multi Range 2008
Dimensions
PQHY-P400, 500YSGM-A
>
Front View
>
>
WY Series (8-20hp)
Left Side View
Upper View
Page 151
R2 Series Standard (10-16hp)
Simultaneous Heating and Cooling with Heat Recovery Outdoor Unit
Improved for even higher efficiency
Throughout the year, many buildings require cooling in some areas and heating in others even in adjacent rooms. The outstanding City Multi R2 system meets this requirement by
distributing surplus heat from cooling operations (and vice versa) to rooms where it is needed.
This efficiency can result in energy savings of up to 30% over conventional systems.
I
New higher efficiency inverter technology, with low
start currents and wrap around coil for added efficiency
I
Up to 40 indoor units connected to each outdoor unit
I
Easy to install unique 2-pipe technology means minimal disruption,
quicker installation and less connections than a 3 pipe equivalents
I
Weight and size reduction compared to previous YGM-A models
I
Improved pipe run of 165m with a total system pipe length of up to 600m
I
100% inverter control
I
High Sensible Cooling Function - By raising the off coil temperature,
a 10% increase in sensible cooling capacity over standard operation
is achievable, the result being greater comfort for occupants
Technical Information
R2 SERIES STANDARD OUTDOOR UNIT 10-16hp
MODEL REFERENCE
CAPACITY (kW)
POWER INPUT (kW)
PURY-P250YHM-A
PURY-P300YHM-A
PURY-P350YHM-A
PURY-P400YHM-A
Heating (nominal)
31.5
37.5
45.0
50.0
Cooling (nominal)
28.0
33.5
40.0
45.0
Heating (UK)
28.7
33.0
39.6
44.0
Cooling (UK)
26.6
31.5
37.6
42.3
Heating (nominal)
7.83
9.58
12.47
13.71
Cooling (nominal)
7.73
9.25
12.47
13.74
Heating (UK)
7.75
9.29
12.10
13.30
Cooling (UK)
4.79
6.85
9.23
10.17
4.02 / 3.62
3.91 / 3.62
3.60 / 3.20
3.64 / 3.27
COP/EER (nominal)
MAX No. OF CONNECTABLE INDOOR UNITS
25
30
35
40
AIRFLOW (m3/min)
185
185
225
225
High
NOISE (dBA)
57
59
60
61
WEIGHT (kg)
235
240
265
265
Width
920
920
1220
1220
Depth
760
760
760
760
Height
1710
1710
1710
1710
DIMENSIONS (mm)
(1650mm without legs)
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
PHASE
3
3
3
3
STARTING CURRENT (A)
8
8
8
8
Heating
12.1
14.8
19.2
21.1
Cooling
11.9
14.2
19.2
21.2
32
32
32
40
4 + earth
4 + earth
4 + earth
4 + earth
ELECTRICAL SUPPLY
RUNNING CURRENT (A)
FUSE RATING (MCB sizes BS EN 60947-2) - (A)
MAINS CABLE No. Cores
Note: For piping restrictions for PURY-P250-400YHM-A please see page 158
Page 152
Side View
Upper View
>
Front View
PURY-P350, 400YHM-A
Side View
>
Upper View
Front View
>
>
>
>
R2 Series Standard (10-16hp)
PURY-P250, 300YHM-A
City Multi Range 2008
Dimensions
Page 153
R2 Series Standard (20-32hp)
Simultaneous Heating and Cooling with Heat Recovery Outdoor Unit
Improved for even higher efficiency
Throughout the year, many buildings require cooling in some areas and heating in others
- even in adjacent rooms. The outstanding City Multi R2 system meets this requirement by
distributing surplus heat from cooling operations (and vice versa) to rooms where it is needed.
This efficiency can result in energy savings of up to 30% over conventional systems.
I
New higher efficiency inverter technology, with low start currents
and wrap around coil for added efficiency
I
Up to 50 indoor units connected to each outdoor unit
I
Easy to install unique 2-pipe technology means minimal disruption,
quicker installation and less connections than a 3 pipe equivalents
I
Weight and size reduction compared to previous YGM-A models
I
Improved pipe run of 165m with a total system pipe length of up to 950m
I
100% inverter control
I
High Sensible Cooling Function - By raising the off coil temperature,
a 10% increase in sensible cooling capacity over standard operation
is achievable, the result being greater comfort for occupants
Technical Information
R2 SERIES STANDARD OUTDOOR UNIT 20-32hp
MODEL REFERENCE
CAPACITY (kW)
POWER INPUT (kW)
PURY-P500YSHM-A PURY-P550YSHM-A PURY-P600YSHM-A PURY-P650YSHM-A PURY-P700YSHM-A PURY-P750YSHM-A PURY-P800YSHM-A
Heating (nominal)
63.0
69.0
76.5
81.5
88.0
95.0
100.0
Cooling (nominal)
56.0
63.0
69.0
73.0
80.0
85.0
90.0
Heating (UK)
54.8
60.0
66.6
70.9
75.7
81.7
86.0
Cooling (UK)
51.5
58.0
63.5
67.2
73.6
78.2
82.8
Heating (nominal)
16.79
18.81
20.83
22.55
24.30
26.36
27.64
Cooling (nominal)
16.75
18.68
19.64
22.80
24.72
27.86
29.75
Heating (UK)
15.28
17.12
18.96
20.52
22.60
24.51
25.71
Cooling (UK)
11.73
13.08
13.75
15.96
17.80
20.06
21.42
3.75 / 3.34
3.66 / 3.37
3.67 / 3.51
3.61 / 3.20
3.62 / 3.23
3.60 / 3.05
3.61 / 3.02
COP/EER (nominal)
MAX No. OF CONNECTABLE INDOOR UNITS
AIRFLOW (m3/min)
High
50
50
50
50
50
50
50
185 / 185
185 / 185
185 / 185
225 / 185
225 / 185
225 / 225
225 / 225
NOISE (dBA)
60
61
62
62.5
63
63.5
64
WEIGHT (kg)
235 + 235
240 + 235
240 + 240
265 + 240
265 + 240
265 + 265
265 + 265
Width
920 + 920
920 + 920
920 + 920
1220 + 920
1220 + 920
1220 + 1220
1220 + 1220
Depth
760
760
760
760
760
760
760
Height
1710
1710
1710
1710
1710
1710
1710
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
3
3
3
3
3
3
3
8/8
8/8
8/8
8/8
8/8
8/8
8/8
RUNNING CURRENT (A) Heating
25.9
29.0
32.1
34.8
37.5
40.7
42.7
Cooling
25.8
28.8
30.3
35.2
38.2
43.0
45.9
32 / 32
32 / 32
32 / 32
32 / 32
40 / 32
40 / 32
40 / 40
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
DIMENSIONS (mm)
(1650mm without legs)
ELECTRICAL SUPPLY
PHASE
STARTING CURRENT (A)
FUSE RATING (MCB sizes BS EN 60947-2) - (A)
MAINS CABLE No. Cores
Note: For piping restrictions for PURY-P500-800YSHM-A please see page 158
Page 154
PURY-P500, 550, 600YSHM-A
Side View
>
Front View
>
Front View
>
Front View
>
PURY-P650, 700YSHM-A
Side View
>
City Multi Range 2008
Dimensions
Side View
>
R2 Series Standard (20-32hp)
PURY-P750, 800YSHM-A
Page 155
R2 Series High COP (8-24hp)
Simultaneous Heating and Cooling with Heat Recovery Outdoor Unit
Improved for even higher efficiency
Throughout the year, many buildings require cooling in some areas and heating in
others - even in adjacent rooms. The outstanding City Multi R2 system meets this
requirement by distributing surplus heat from cooling operations (and vice versa)
to rooms where it is needed. This efficiency can result in energy savings of
up to 30% over conventional systems.
I
Highest ever COP’s / EER’s due to new high efficiency
inverter technology and wrap around coil for added efficiency
I
Up to 50 indoor units connected to each outdoor unit
I
Easy to install unique 2-pipe technology means minimal
disruption, quicker installation and less connections
than a 3 pipe equivalents
I
Weight and size reduction compared to previous YGM-A models
I
Improved pipe run of 165m with a total system pipe length of up to 800m
I
100% inverter control with low start currents
I
High Sensible Cooling Function - By raising the off coil temperature,
a 10% increase in sensible cooling capacity over standard operation
is achievable, the result being greater comfort for occupants
Technical Information
R2 SERIES HIGH COP OUTDOOR UNIT 8-24hp
MODEL REFERENCE
CAPACITY (kW)
POWER INPUT (kW)
PURY-EP200YHM-A PURY-EP300YHM-A PURY-EP400YSHM-A PURY-EP450YSHM-A PURY-EP500YSHM-A PURY-EP550YSHM-A PURY-EP600YSHM-A
Heating (nominal)
25.0
37.5
50.0
56.0
63.0
69.0
76.5
Cooling (nominal)
22.4
33.5
45.0
50.0
56.0
63.0
69.0
Heating (UK)
23.0
33.0
44.0
48.7
54.8
60.0
66.6
Cooling (UK)
21.3
31.5
42.3
46.0
51.5
58.0
63.5
Heating (nominal)
5.81
9.37
11.73
13.77
15.33
17.37
19.12
Cooling (nominal)
5.23
8.33
10.57
13.09
13.70
16.38
17.00
Heating (UK)
5.75
9.09
11.38
12.53
13.95
15.81
17.40
Cooling (UK)
3.24
6.16
7.82
9.16
9.59
11.47
11.90
4.30 / 4.28
4.00 / 4.02
4.26 / 4.25
4.06 / 3.81
4.10 / 4.08
3.97 / 3.84
4.00 / 4.05
COP/EER (nominal)
MAX No. OF CONNECTABLE INDOOR UNITS
20
30
40
45
50
50
50
AIRFLOW (m3/min)
185
225
185 / 185
185 / 185
225 / 185
225 / 185
225 / 225
High
NOISE (dBA)
57
60
60
60
62
62
63
WEIGHT (kg)
235
265
235 + 235
235 + 235
265 + 235
265 + 235
265 + 265
Width
920
1220
920 + 920
920 + 920
1220 + 920
1220 + 920
1220 + 1220
Depth
760
760
760
760
760
760
760
Height
1710
1710
1710
1710
1710
1710
1710
380-415v, 50Hz
DIMENSIONS (mm)
(1650mm without legs)
ELECTRICAL SUPPLY
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
PHASE
3
3
3
3
3
3
3
STARTING CURRENT (A)
8
8
8/8
8/8
8/8
8/8
8/8
RUNNING CURRENT (A) Heating
8.9
14.4
18.1
21.2
23.6
26.8
29.5
Cooling
8.0
12.8
16.3
20.2
21.1
25.3
26.2
20
32
20 / 20
32 / 20
32 / 20
32 / 32
32 / 32
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
FUSE RATING (MCB sizes BS EN 60947-2) - (A)
MAINS CABLE No. Cores
Note: For piping restrictions for PURY-EP200-600Y(S)HM-A please see page 158
Page 156
PURY-EP200, 300YHM-A
PURY-EP200YHM-A schematic is the same as PURY-P250, 300YHM-A on page 153
PURY-EP300YHM-A schematic is the same as PURY-P350, 400YHM-A on page 153
PURY-EP400, 450YSHM-A
Side View
>
Front View
>
Front View
>
Front View
>
City Multi Range 2008
Dimensions
PURY-EP500, 550YSHM-A
Side View
>
Side View
>
R2 Series High COP (8-24hp)
PURY-EP600YSHM-A
Page 157
R2 Series Piping Restrictions
R2 SERIES PIPING RESTRICTIONS
TABLE 1: TOTAL PIPE LENGTH
OUTDOOR MODEL
MAX LENGTH
P250, P300
P350, P400, EP200, EP300
P500, P550, EP400, EP450, EP500, EP550
P600, P650, EP600
P700, P750, P800
550m*1
600m*1
750m*1
800m*1
950m*1
*1 Please refer to Graph 1
GRAPH 1: TOTAL PIPING LENGTH RESTRICTIONS
1000
Total Extended Pipe Length (m)
900
800
700
PURY-P700,750,800 YSHM-A
600
PURY-P600,650,800 YSHM-A, PURY-EP600YSHM-A
500
PURY-P500,550 YSHM-A, PURY-EP400,450,500,550 YSHM-A
400
PURY-P350,400 YHM-A, PURY-EP200,300 YHM-A
300
PURY-P250,300YHM-A
200
100
0
10
20
30
40
50
60
70
80
90
100
110
Distance Between Outdoor Unit and BC Controller (m)
R2 SERIES PIPING RESTRICTIONS
R2 SERIES PIPING RESTRICTIONS
PIPING LENGTH (1 BC CONTROLLER, NO SUB BC CONTROLLER)
ITEM
Total Piping Length
Furthest Piping Length
Length Between OU and BC
Length Between Furthest IU and BC
Height Between OU and IU (OU above IU)
Height Between OU and IU (OU below IU)
Height Between IU and BC
Height Between IU and IU
*1 Please refer to Graph 1. *2 Height difference between BC controller and furthest indoor unit is zero.
Page 158
PIPE SECTION
A+B+a+b+c+d
A+B+d
A
B+d
H
H1
h1
h2
MAX LENGTH
(See Table 1)
165m
110m*1
60m*2 (40m)
50m
40m
15m
15m
City Multi Range 2008
R2 SERIES PIPING RESTRICTIONS
PIPING LENGTH (>1 BC CONTROLLER FOR 1 OUTDOOR UNIT)
ITEM
PIPE SECTION
A+B+C+D+E+a+b+c+d+e+f
A+C+E+f
A
B+d or C+D+e or C+E+f
H
H1
h1
h2
h3
Total Piping Length
Furthest Piping Length
Length Between OU and BC
Length Between Furthest IU and BC
Height Between OU and IU (OU above IU)
Height Between OU and IU (OU below IU)
Height Between IU and BC
Height Between IU and IU
Height Between BC (Main or Sub) and BC (Sub)
MAX LENGTH
(See Table 1)
165m
110m*1
60m*2 (40m)
50m
40m
15m
15m
15m
R2 Series Piping Restrictions
*1 Please refer to Graph 1. *2 Height difference between BC controller and furthest indoor unit is zero.
R2 SERIES PIPING RESTRICTIONS
PIPING LENGTH (>1 BC CONTROLLER FOR 2 OUTDOOR UNITS)
ITEM
Total Piping Length
Furthest Piping Length
Length Between OU and BC
Length Between Furthest IU and BC
Height Between OU and IU (OU above IU)
Height Between OU and IU (OU below IU)
Height Between IU and BC
Height Between IU and IU
Height Between BC (Main or Sub) and BC (Sub)
Length Between Main OU and Sub OU
Height Between Main OU and Sub OU
PIPE SECTION
F+G+A+B+C+D+E+a+b+c+d+e+f
F(G)+A+C+E+f
F(G)+A
B+d or C+D+e or C+E+f
H
H1
h1
h2
h3
F+G or H
h4
MAX LENGTH
(See Table 1)
165m
110m*1
60m*2 (40m)
50m
40m
15m
15m
15m
5m
0.1m
*1 Please refer to Graph 1. *2 Height difference between BC controller and furthest indoor unit is zero.
Page 159
WR2 Series (8-20hp)
Water Cooled Condensing Unit
Simultaneous Heating and Cooling with Double Heat Recovery
The WR2 system has double heat recovery potential, making this system very economical.
Not only does it produce heat recovery from indoor units on the same refrigerant circuit,
it also produces heat recovery via the water circuit between heat source units.
I
All the benefits of the R2 Series with water cooled condensing units, using a single inverter compressor
I
High COPs possible thanks to increased efficiency and careful control of the system,
allowing the largest operational water circuit temperature band ever
I
Unique 2-pipe refrigerant circuit allows simultaneous heating and cooling
plus heat recovery between indoor units as with the R2 system
I
Total building heat recovery made possible by exchanging energy in both
refrigerant and water circuits
I
Combining WR2 with waste heat energy provides unique application solutions
I
Condensing units can be situated indoors allowing greater design flexibility
and no limitation on building size
I
Single inverter compressor up to 20hp
I
Improved pipe run of 150m with a total system pipe length of up to 400m
I
High Sensible Cooling Function - By raising the off coil temperature,
a 10% increase in sensible cooling capacity over standard operation is
achievable, the result being greater comfort for occupants
I
Now able to operate with closed loop ground source water
temperatures, bore hole and slinky applications are now possible
Technical Information
WR2 SERIES HEAT SOURCE UNIT - 8-20hp
MODEL REFERENCE
CAPACITY (kW)
POWER INPUT (kW)
PQRY-P200YGM-A
PQRY-P250YGM-A
PQRY-P400YSGM-A
PQRY-P500YSGM-A
Heating (nominal)
25.0
31.5
50.0
63.0
Cooling (nominal)
22.4
28.0
45.0
56.0
Heating (nominal)
4.69
5.80
11.01
13.60
Cooling (nominal)
4.79
5.95
11.35
15.06
MAX No. OF CONNECTABLE INDOOR UNITS
15
19
24
24
NOISE (dBA)
46
47
50
53
WEIGHT (kg)
263
266
208 + 232
208 + 236
Width
990
990
1980
1980
Depth
550
550
550
550
Height
1800
1800
1800
1800
DIMENSIONS (mm)
ELECTRICAL SUPPLY
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
PHASE
3
3
3
3
STARTING CURRENT (A)
8
8
8
8
Heating
7.2
8.9
17.0
21.0
Cooling
7.4
9.1
17.5
23.3
20
25
40
50
4 + earth
4 + earth
4 + earth
4 + earth
RUNNING CURRENT (A)
FUSE RATING (BS88) - HRC (A)
MAINS CABLE No. Cores
PQRY-P200-500Y(S)GM-A Piping Restrictions
TOTAL PIPING LENGTH
FURTHEST PIPING LENGTH
BETWEEN OUTDOOR AND BC CONTROLLER (MASTER) - LENGTH
400m max*3 (300m)
150m max
110m max*4 (70m)
BETWEEN INDOOR AND BC CONTROLLER (MASTER/SLAVE) - LENGTH
60m max*5 (40m)
BETWEEN INDOOR AND OUTDOOR - HEIGHT
50m max (40m)*1
BETWEEN INDOOR AND INDOOR - HEIGHT
15m max (10m)*2
BETWEEN INDOOR AND BC CONTROLLER (MASTER/SLAVE) - HEIGHT
BETWEEN INDOOR (MASTER) AND INDOOR (SLAVE) - HEIGHT
15m max
15m max (10m)*2
*1 When O/U is below indoor *2 In case of P200, P250 indoor unit *3 Distance between outdoor unit and BC Controller is 70m or less *4 Total piping length is 300m or less
*5 Height difference between the Master BC Controller and furthest indoor unit is zero
Page 160
PQRY-P200, 250YGM-A
Upper View
Left Side View
>
>
Front View
>
City Multi Range 2008
Dimensions
PQRY-P400, 500YSGM-A
>
Front View
>
>
WR2 Series (8-20hp)
Left Side View
Upper View
Page 161
PFD-P-VM-E (10/20hp)
Heat Pump Close Control System
Mitsubishi Electric’s new Close Control System is specifically designed for computer rooms, laboratories etc, where
a need for high sensible cooling and close control of temperature and humidity is required. Because of the need for
close control 24 hours a day, 365 days a year, a newly developed inverter driven compressor has been incorporated
into the outdoor unit, maximising the energy efficiency of the PFD series.
It is also able to be connected to a computer network using our
G50 controller, in order to monitor and provide remote email alarms.
I
High sensible cooling
I
Newly developed inverter driven compressor
I
Energy efficient with high COP’s
I
Close control of temperature, ±1ºC
I
Easy to install - no service space
needed at the rear of the unit
I
Optional third party humidifier available
I
Quick recovery following power failure
I
Return or discharge air temperature control
Technical Information
PFD-P-VM-E - INDOOR UNIT
MODEL REFERENCE
CAPACITY (kW)
PUHY-P-YHM-A / PQHY-P-YGM-A - OUTDOOR UNITS
PFD-P250VM-E
PFD-P500VM-E
PUHY-P250YHM-A PQHY-P250YGM-A PUHY-P250YHM-A x2 PQHY-P250YGM-A x2
Heating (nominal)
31.5
63.0
31.5
31.5
63.0
Cooling (nominal)
28.0
56.0
28.0
28.0
56.0
56.0
Heating (UK)
29.1
55.4
28.7
N/A
54.8
N/A
Cooling (UK)
26.6
51.5
26.6
N/A
51.5
N/A
0.93
0.93
N/A
N/A
N/A
N/A
2.5
5.0
6.6
5.6
6.6 / 6.6
5.6 / 5.6
Cooling (nominal)
2.5
5.0
6.8
5.9
6.8 / 6.8
5.9 / 5.9
Heating (UK)
2.15
4.3
6.55
N/A
6.55 / 6.55
N/A
Cooling (UK)
2.15
4.3
4.2
N/A
4.2 / 4.2
N/A
AIRFLOW (m3/min)
160
320
185
N/A
185 / 185
N/A
EXTERNAL STATIC PRESSURE (Pa)
120
120
N/A
N/A
N/A
N/A
Gas
22.2 (7/8”)
28.58 (1 1/8”)
22.2 (7/8”)
22.2 (7/8”)
28.58 (1 1/8”)
28.58 (1 1/8”)
Liquid
15.88 (5/8”)
SHF
POWER INPUT (kW)
PIPE SIZE mm(in)
Heating (nominal)
63.0
9.52 (3/8”)
15.88 (5/8”)
9.52 (3/8”)
9.52 (3/8”)
15.88 (5/8”)
NOISE (dBA)
59
63
57
47
57 / 57
47 / 47
WEIGHT (kg)
380
520
200
275
200 + 200
275 + 275
Width
1380
1980
920
990
920 + 920
990 + 990
Depth
780
780
760
550
760
550
Height
1950
1950
1710
1800
1710
1800
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
380-415v, 50Hz
3
3
3
3
3
3
Inverter / DOL
47
68
8
8
8/8
8/8
Heating
4.9
8.7
10.2
8.5
10.2 / 10.2
8.5 / 8.5
Cooling
4.9
8.7
10.5
9.0
10.5 / 10.5
9.0 / 9.0
16
20
32
25
32 / 32
25 / 25
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
4 + earth
DIMENSIONS (mm)
ELECTRICAL SUPPLY
PHASE
STARTING CURRENT (A)
RUNNING CURRENT (A)
FUSE RATING (BS88) - HRC (A)
MAINS CABLE No. Cores
PUHY-P-YHM-A / PQHY-P-YGM-A Piping Restrictions
TOTAL PIPING LENGTH
BETWEEN INDOOR AND OUTDOOR UNITS - HEIGHT
Page 162
165m max (150m for PQHY)
50m max (40m max if outdoor installed below)
PFD-P250VM-E
Upper View
>
Side View
Front View
>
>
City Multi Range 2008
Dimensions
PFD-P500VM-E
Upper View
>
Side View
>
PFD-P-VM-E (10/20hp)
Front View
>
Page 163
PLFY-P-VBM-E
2, 3 and 4-Way Blow Ceiling Cassette Indoor Unit
Power cassettes offer 72 different airflow patterns, with the ability to handle a multitude of ceiling applications up to
4.2 meters in height. The easy to install, slim unit is ideal for maintaining constant temperatures, thanks to adjustable
vanes that allow users to precisely direct air where it’s needed.
The Mitsubishi Electric airflow control mechanism has been improved and uses wider vanes so that the unit reduces
drafts and smudging, whilst a high performance drain pump on the drain lift mechanism allows drain water to be
lifted up to 850mm from the ceiling surface.
I
Handy corner pocket design simplifies maintenance
I
Airflow controllable for ceiling heights up to 4.2m,
with automatic adjustment of fan speed
I
Reduced draft air distribution, with independent vane control
I
Drain pump as standard, 850mm from drain pan
I
Filter lowering operation down to 4m
(optional PLP-6BAJ grille required)
I
Optional ‘I See Sensor’ for energy saving and smooth
temperature control throughout the room
I
For further information on the features of this cassette, please see page 60
Technical Information
PLFY-P-VBM-E - INDOOR UNIT
MODEL REFERENCE
PLFY-P32VBM-E
PLFY-P40VBM-E
PLFY-P50VBM-E
PLFY-P63VBM-E
PLFY-P80VBM-E
PLFY-P100VBM-E
PLFY-P125VBM-E
Heating (nominal)
4.0
5.0
6.3
8.0
10.0
12.5
16.0
Cooling (nominal)
3.6
4.5
5.6
7.1
9.0
11.2
14.0
Heating (UK)
3.7
4.6
5.8
7.4
9.2
11.6
14.8
Cooling (UK)
3.2
4.0
5.0
6.3
8.0
10.0
12.5
High Sensible
Cooling (UK)
2.6
3.3
4.1
5.2
6.5
8.1
10.2
SHF
(UK)
0.84
0.83
0.76
0.75
0.73
0.73
0.71
High Sensible
(UK)
0.96
0.91
0.83
0.79
0.78
0.79
0.74
POWER INPUT (kW)
Heating (nominal)
0.02
0.03
0.03
0.04
0.06
0.14
0.15
Cooling (nominal)
0.03
0.04
0.04
0.05
0.07
0.15
0.16
CAPACITY (kW)
AIRFLOW (m3/min)
Lo-Mi1-Mi2-Hi
11-12-13-14
12-13-14-16
12-13-14-16
14-15-16-18
16-18-20-22
21-24-27-29
22-25-28-30
NOISE (dBA)
Lo-Mi1-Mi2-Hi
27-28-29-31
27-28-30-31
27-28-30-31
28-29-30-32
30-32-35-37
34-37-39-41
35-38-41-43
WEIGHT (kg)
(Grille)
22(6)
22(6)
22(6)
23(6)
23(6)
27(6)
27(6)
DIMENSIONS (mm)
Width (Grille)
840(950)
840(950)
840(950)
840(950)
840(950)
840(950)
840(950)
Depth (Grille)
840(950)
840(950)
840(950)
840(950)
840(950)
840(950)
840(950)
Height (Grille)
258(35)
258(35)
258(35)
258(35)
258(35)
298(35)
298(35)
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
PHASE
Single
Single
Single
Single
Single
Single
Single
RUNNING CURRENT (A) Heating
0.14
0.22
0.22
0.29
0.43
0.94
1.00
Cooling
0.22
0.29
0.29
0.36
0.51
1.00
1.07
FUSE RATING (BS88) - HRC (A)
6
6
6
6
6
6
6
MAINS CABLE No. Cores
3
3
3
3
3
3
3
PLP-6BA
PLP-6BA
PLP-6BA
PLP-6BA
PLP-6BA
PLP-6BA
PLP-6BA
ELECTRICAL SUPPLY
GRILLE MODEL REFERENCE
Page 164
PLFY-P32, 40, 50, 63, 80, 100, 125VBM-E
Upper View
>
Lower View
>
>
MODELS
A
B
PLFY-P32-80VBM-E
241
258
PLFY-P100-125VBM-E
281
298
PLFY-P-VBM-E
Side View
City Multi Range 2008
Dimensions
Page 165
PLFY-P-VCM-E
600x600 4-Way Blow Ceiling Cassette Indoor Unit
The compact size of this unit is ideal for 600x600mm ceilings and with a depth of 208mm,
this lightweight unit makes installation a breeze. This unit also comes complete with
a long life filter that will last for approximately 2,500 hours.
I
Compact size for handy installation and easy maintenance
I
Only 208mm high
I
Fresh air duct facility
Technical Information
PLFY-P-VCM-E - INDOOR UNIT
MODEL REFERENCE
PLFY-P20VCM-E
PLFY-P25VCM-E
PLFY-P32VCM-E
PLFY-P40VCM-E
Heating (nominal)
2.5
3.2
4.0
5.0
Cooling (nominal)
2.2
2.8
3.6
4.5
Heating (UK)
2.3
3.0
3.7
4.6
Cooling (UK)
2.1
2.6
3.4
4.3
High Sensible
Cooling (UK)
1.6
2.0
2.6
3.3
SHF
(UK)
0.86
0.81
0.76
0.70
High Sensible
(UK)
1.00
0.90
0.85
0.76
POWER INPUT (kW)
Heating (nominal)
0.05
0.05
0.06
0.06
Cooling (nominal)
0.05
0.05
0.06
0.06
Lo-Mi-Hi
8-9-10
8-9-10
8-9-11
8-9-11
NOISE (dBA)
Lo-Mi-Hi
28-31-35
28-31-37
29-33-38
30-34-39
WEIGHT (kg)
(Grille)
15.5(3)
15.5(3)
17(3)
17(3)
DIMENSIONS (mm)
Width (Grille)
570(650)
570(650)
570(650)
570(650)
Depth (Grille)
570(650)
570(650)
570(650)
570(650)
Height (Grille)
208(20)
208(20)
208(20)
208(20)
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
CAPACITY (kW)
AIRFLOW (m3/min)
ELECTRICAL SUPPLY
Single
Single
Single
Single
Heating
0.23
0.23
0.28
0.28
Cooling
0.23
0.23
0.28
0.28
FUSE RATING (BS88) - HRC (A)
6
6
6
6
MAINS CABLE No. Cores
3
3
3
3
SLP-2AA
SLP-2AA
SLP-2AA
SLP-2AA
PHASE
RUNNING CURRENT (A)
GRILLE MODEL REFERENCE
Page 166
PLFY-P20, 25, 32, 40VCM-E
Lower View
>
PLFY-P-VCM-E
Side View
>
City Multi Range 2008
Dimensions
Page 167
PLFY-P-VLMD-E
2-Way Blow Ceiling Cassette Indoor Unit
The PLFY-P-VLMD-E cassette unit fits into the space in a suspended ceiling to provide
heating or cooling. This new unit has been redesigned with lower unit height
and lower noise levels.
I
Light unit for ease of installation
I
Terminal block on outside of unit for easy wiring
I
Drain lift-pump mechanism as standard
I
Newly designed decoration panel with air flow
switching and swing functions as standard
Technical Information
PLFY-P-VLMD-E - INDOOR UNIT
PLFYP20VLMD-E
PLFYP25VLMD-E
PLFYP32VLMD-E
PLFYP40VLMD-E
PLFYP50VLMD-E
PLFYP63VLMD-E
Heating (nominal)
2.5
3.2
4.0
5.0
6.3
8.0
10.0
12.5
16.0
Cooling (nominal)
2.2
2.8
3.6
4.5
5.6
7.1
9.0
11.2
14.0
Heating (UK)
2.3
3.0
3.7
4.6
5.8
7.4
9.2
11.6
14.8
Cooling (UK)
2.1
2.6
3.4
4.3
5.3
6.7
8.5
10.6
13.2
High Sensible
Cooling (UK)
1.6
2.0
2.6
3.3
4.1
5.2
6.5
8.1
10.2
SHF
(UK)
0.81
0.77
0.74
0.67
0.70
0.72
0.71
0.73
0.73
High Sensible
(UK)
0.94
0.85
0.81
0.73
0.73
0.77
0.77
0.79
0.80
POWER INPUT (kW) Heating (nominal)
0.065
0.065
0.065
0.074
0.075
0.094
0.140
0.150
0.27
Cooling (nominal)
0.072
0.072
0.072
0.081
0.082
0.101
0.147
0.157
0.28
MODEL REFERENCE
CAPACITY (kW)
PLFYPLFYPLFYP80VLMD-E P100VLMD-E P125VLMD-E
AIRFLOW (m3/min)
Lo-Mi1-Mi2-Hi
6.5-8.0-9.5
6.5-8.0-9.5
6.5-8.0-9.5
7.0-8.5-10.5
9.0-11.0-12.5
10.0-13.0-15.5
15.5-18.5-22.0
17.5-21.0-25.0
24-27-30-33
NOISE (dBA)
Lo-Mi1-Mi2-Hi
27-30-33
27-30-33
27-30-33
29-33-36
31-34-37
32-37-39
33-36-39
36-39-42
40-42-44-46
WEIGHT (kg)
(Grille)
23(6.5)
23(6.5)
24(6.5)
24(6.5)
27(7.5)
28(7.5)
44(12.5)
47(12.5)
56(13)
DIMENSIONS (mm)
Width (Grille)
776(1080)
776(1080)
776(1080)
776(1080)
946(1250)
946(1250)
1446(1750)
1446(1750)
1708(2010)
Depth (Grille)
634(710)
634(710)
634(710)
634(710)
634(710)
634(710)
634(710)
634(710)
606(710)
Height (Grille)
290(20)
290(20)
290(20)
290(20)
290(20)
290(20)
290(20)
290(20)
290(20)
220-240v,
220-240v,
220-240v,
220-240v,
220-240v,
220-240v,
220-240v,
220-240v,
220-240v,
50Hz
50Hz
50Hz
50Hz
50Hz
50Hz
50Hz
50Hz
50Hz
PHASE
Single
Single
Single
Single
Single
Single
Single
Single
Single
RUNNING CURRENT (A) Heating
0.30
0.30
0.30
0.34
0.35
0.43
0.66
0.69
1.33
Cooling
0.36
0.36
0.36
0.40
0.41
0.49
0.72
0.75
1.35
FUSE RATING (BS88) - HRC (A)
6
6
6
6
6
6
6
6
6
MAINS CABLE No. Cores
3
3
3
3
3
3
3
3
3
CMP40VLW-B
CMP40VLW-B
CMP40VLW-B
CMP40VLW-B
CMP63VLW-B
CMP63VLW-B
CMP100VLW-B
CMP100VLW-B
CMP125VLW-B
ELECTRICAL SUPPLY
GRILLE MODEL REFERENCE
Page 168
PLFY-P20, 25, 32, 40, 50, 63, 80, 100VLMD-E
Front View
>
Lower View
Upper View
>
>
Side View
City Multi Range 2008
Dimensions
>
PLFY-P125VLMD-E
>
Rear View
>
Upper View
>
Lower View
>
PLFY-P-VLMD-E
Side View
Page 169
PMFY-P-VBM-E
1-Way Blow Ceiling Cassette Indoor Unit
Utilising a compact and lightweight body, the unit is perfect for applications where ceiling space is limited.
A total body weight of 14kg makes it one of the lightest available, latest fan technology also makes it
one of the quietest.
I
Compact size for handy installation and easy maintenance
I
Newly developed airflow control technology
reduces noise levels to only 27dBA
I
Drain lift pump mechanism allows the drain to be positioned
anywhere up to 600mm from the ceiling’s surface
I
Only 230mm high
I
Fresh air duct facility
Technical Information
PMFY-P-VBM-E - INDOOR UNIT
MODEL REFERENCE
PMFY-P20VBM-E
PMFY-P25VBM-E
PMFY-P32VBM-E
PMFY-P40VBM-E
Heating (nominal)
2.5
3.2
4.0
5.0
Cooling (nominal)
2.2
2.8
3.6
4.5
Heating (UK)
2.3
3.0
3.7
4.6
Cooling (UK)
2.1
2.6
3.4
4.3
High Sensible
Cooling (UK)
1.6
2.0
2.6
3.3
SHF
(UK)
0.81
0.77
0.71
0.70
High Sensible
(UK)
0.94
0.90
0.77
0.76
POWER INPUT (kW)
Heating (nominal)
0.042
0.044
0.044
0.054
CAPACITY (kW)
Cooling (nominal)
0.042
0.044
0.044
0.054
Lo-Mi1-Mi2-Hi
6.5-7.2-8.0-8.7
7.3-8.0-8.6-9.3
7.3-8.0-8.6-9.3
7.7-8.7-9.7-10.7
NOISE (dBA)
Lo-Mi1-Mi2-Hi
27-30-33-35
32-34-36-37
32-34-36-37
33-35-37-39
WEIGHT (kg)
(Grille)
14(3)
14(3)
14(3)
14(3)
DIMENSIONS (mm)
Width (Grille)
812(1000)
812(1000)
812(1000)
812(1000)
Depth (Grille)
395(470)
395(470)
395(470)
395(470)
Height (Grille)
230(30)
230(30)
230(30)
230(30)
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
AIRFLOW (m3/min)
ELECTRICAL SUPPLY
PHASE
Single
Single
Single
Single
Heating
0.20
0.21
0.21
0.26
Cooling
0.20
0.21
0.21
0.26
FUSE RATING (BS88) - HRC (A)
6
6
6
6
MAINS CABLE No. Cores
3
3
3
3
PMP-40BM
PMP-40BM
PMP-40BM
PMP-40BM
RUNNING CURRENT (A)
GRILLE MODEL REFERENCE
Page 170
PMFY-P20, 25, 32, 40VBM-E
>
>
Lower View
>
Front View
>
PMFY-P-VBM-E
Side View
Upper View
City Multi Range 2008
Dimensions
Page 171
PEFY-P-VMS1-E
Ultra Thin Ceiling Concealed Ducted Indoor Unit
The ultra thin ceiling concealed ducted indoor unit offers increased flexibility and is particularly
suitable for places where low noise operation is desired from a slimline body.
I
Ultra thin body - height of only 200mm & width of only 790mm (P15-32)
I
Extremely quiet operation - as low as 22dBA
I
Cooling operation set temperature can be set down to 14°C db
I
Static pressure of 5-50Pa
I
Now available in a size 15, ideal for hotel rooms
Technical Information
PEFY-P-VMS1-E - INDOOR UNIT
MODEL REFERENCE
PEFY-P25VMS1-E
PEFY-P32VMS1-E
PEFY-P40VMS1-E
PEFY-P50VMS1-E
PEFY-P63VMS1-E
Heating (nominal)
1.9
2.5
3.2
4.0
5.0
6.3
8.0
Cooling (nominal)
1.7
2.2
2.8
3.6
4.5
5.6
7.1
Heating (UK)
1.8
2.3
3.0
3.7
4.6
5.8
7.4
Cooling (UK)
1.5
2.0
2.5
3.2
4.0
5.0
6.3
High Sensible
Cooling (UK)
1.2
1.6
2.0
2.6
3.3
4.1
5.2
SHF
(UK)
0.93
0.85
0.84
0.78
0.75
0.74
0.75
High Sensible
(UK)
1.00
1.00
0.90
0.85
0.82
0.78
0.79
POWER INPUT (kW)
Heating (nominal)
0.03
0.03
0.04
0.05
0.05
0.07
0.07
Cooling (nominal)
0.05
0.05
0.06
0.07
0.07
0.09
0.09
5.0-6.0-7.0
5.5-6.5-8.0
5.5-7.0-9.0
6.0-8.0-10.0
8.0-9.5-11.0
9.5-11.0-13.0
12.0-14.0-16.5
5-15-35-50
5-15-35-50
5-15-35-50
5-15-35-50
5-15-35-50
5-15-35-50
5-15-35-50
22-24-28
23-25-29
24-26-30
24-27-32
28-30-33
30-32-35
30-33-36
19
19
19
20
24
24
28
Width
790
790
790
790
990
990
1190
Depth
700
700
700
700
700
700
700
Height
200
200
200
200
200
200
200
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
PHASE
Single
Single
Single
Single
Single
Single
Single
RUNNING CURRENT (A) Heating
0.31
0.36
0.39
0.39
0.45
0.56
0.61
Cooling
0.42
0.47
0.50
0.50
0.56
0.67
0.72
FUSE RATING (BS88) - HRC (A)
6
6
6
6
6
6
6
MAINS CABLE No. Cores
3
3
3
3
3
3
3
CAPACITY (kW)
AIRFLOW (m3/min)
PEFY-P15VMS1-E PEFY-P20VMS1-E
Lo-Mi-Hi
EXTERNAL STATIC PRESSURE (Pa) Lo-Mi1-Mi2-Hi
NOISE (dBA) (5Pa)
Lo-Mi-Hi
WEIGHT (kg)
DIMENSIONS (mm)
ELECTRICAL SUPPLY
Page 172
PEFY-P15, 20, 25, 32, 40, 50, 63 VMS1-E
Upper View
>
Front View
>
Model
A
B
C
D
700 752 798 660
952 998 860
PEFY-P40-50VMS1-E 900
PEFY-P63VMS1-E
1100 1152 1198 1060
PEFY-P15-32VMS1-E
E
F
7
9
11
600
800
1000
PEFY-P-VMS1-E
Side View
>
City Multi Range 2008
Dimensions
Page 173
PEFY-P-VMM-E
Ceiling Concealed Ducted Indoor Unit
The PEFY-P-VMM-E ducted indoor unit is concealed within the ceiling space to allow unobtrusive
air conditioning. Flexibility of duct layout allows air flow patterns to be arranged to suit any application.
I
Reduced noise levels thanks to the use of a newly
designed centrifugal fan - as low as 27dBA
I
Drain lift-pump (option), 550mm of lift
I
Complete flexibility in air conditioning design
I
Cooling operation set temperature can be set
down to 14ºC db
Technical Information
PEFY-P-VMM-E - INDOOR UNIT
MODEL REFERENCE
PEFYP20VMM-E
PEFYP25VMM-E
PEFYP32VMM-E
PEFYP40VMM-E
PEFYP50VMM-E
PEFYP63VMM-E
PEFYP80VMM-E
PEFYP100VMM-E
PEFYP125VMM-E
Heating (nominal)
2.5
3.2
4.0
5.0
6.3
8.0
10.0
12.5
16.0
Cooling (nominal)
2.2
2.8
3.6
4.5
5.6
7.1
9.0
11.2
14.0
Heating (UK)
2.3
3.0
3.7
4.6
5.8
7.4
9.2
11.6
14.8
Cooling (UK)
2.1
2.6
3.4
4.3
5.3
6.7
8.5
10.6
13.2
High Sensible
Cooling (UK)
1.6
2.0
2.6
3.3
4.1
5.2
6.5
8.1
10.2
SHF
(UK)
0.86
0.77
0.76
0.77
0.75
0.75
0.72
0.78
0.77
High Sensible
(UK)
0.94
0.85
0.85
0.85
0.83
0.81
0.78
0.88
0.85
POWER INPUT (kW) Heating (nominal)
0.15
0.15
0.17
0.19
0.20
0.22
0.25
0.29
0.40
Cooling (nominal)
0.15
0.15
0.17
0.19
0.20
0.22
0.25
0.29
0.40
6.0-7.2-8.5
6.0-7.2-8.5
7.5-9.0-10.5
10-12-14
12.0-14.5-17.0
13.5-16.2-19.0
14.5-18.0-21.0
23-33
28-40
EXTERNAL STATIC PRESSURE (Pa) - Lo-Mi-Hi
30-50-100
30-50-100
30-50-100
30-50-100
30-50-100
30-50-100
30-50-100
50-130
50-130
NOISE (dBA)
27-30-32
27-30-32
28-32-35
31-34-37
31-35-38
31-35-38
32-36-39
40-44
42-45
27
27
27
33
33
42
42
62
65
Width
815
815
815
935
935
1175
1175
1415
1415
Depth
700
700
700
700
700
700
700
740
740
Height
295
295
295
295
295
295
295
325
325
220-240v,
220-240v,
220-240v,
220-240v,
220-240v,
220-240v,
220-240v,
220-240v,
220-240v,
50Hz
50Hz
50Hz
50Hz
50Hz
50Hz
50Hz
50Hz
50Hz
PHASE
Single
Single
Single
Single
Single
Single
Single
Single
Single
RUNNING CURRENT (A) Heating
0.73
0.73
0.81
0.92
0.98
1.07
1.15
1.34
1.90
Cooling
0.73
0.73
0.81
0.92
0.98
1.07
1.15
1.34
1.90
FUSE RATING (BS88) - HRC (A)
6
6
6
6
6
6
6
6
6
MAINS CABLE No. Cores
3
3
3
3
3
3
3
3
3
CAPACITY (kW)
AIRFLOW (m3/min)
Lo-Mi-Hi
Lo-Mi-Hi
WEIGHT (kg)
DIMENSIONS (mm)
ELECTRICAL SUPPLY
Page 174
PEFY-P20, 25, 32, 40, 50, 63, 80VMM-E
Model
A
B
C
PEFY-P20-32VMM-E
652
772
1012
245
305
280
290
PEFY-P40-50VMM-E
PEFY-P63-80VMM-E
Side View
D
Upper View
>
Front View
>
E
710 684
830 804
1070 1044
>
City Multi Range 2008
Dimensions
PEFY-P100, 125VMM-E
Upper View
>
1252
370
370
360
360
1252
1284
1310
>
Front View
>
370
PEFY-P-VMM-E
Side View
360
1252
Page 175
PEFY-P-VMH-E
High Static Pressure Ceiling Concealed Ducted Indoor Unit
With improved design flexibility as a result of increased external static pressure, the PEFY-P-VMH-E
allows authentic duct air conditioning within the strictest aesthetic confines.
I
External static pressure of 200Pa
I
Greater flexibility for duct extension, branching air outlet configuration
I
Reduced noise levels thanks to the use of newly designed centrifugal fan
I
Duct can be connected to intake side
I
Drain lift-pump (option) 550mm of lift
I
Cooling operation set temperature
can be set down to 14ºC db
Technical Information
PEFY-P-VMH-E - INDOOR UNIT
MODEL REFERENCE
PEFY-P80VMH-E
PEFY-P100VMH-E
PEFY-P125VMH-E
PEFY-P140VMH-E
Heating (nominal)
10.0
12.5
16.0
18.0
Cooling (nominal)
9.0
11.2
14.0
16.0
Heating (UK)
9.2
11.6
14.8
16.6
Cooling (UK)
8.5
10.6
13.2
15.1
High Sensible
Cooling (UK)
6.5
8.1
10.2
11.6
SHF
(UK)
0.74
0.80
0.74
0.74
High Sensible
(UK)
0.83
0.91
0.81
0.82
POWER INPUT (kW) Heating (nominal)
0.32
0.48
0.48
0.48
Cooling (nominal)
0.32
0.48
0.48
0.48
CAPACITY (kW)
AIRFLOW (m3/min)
Lo-Hi
18-25
26.5-38.0
26.5-38.0
28-40
100-150-200
100-150-200
100-150-200
100-150-200
38-43
38-44
38-44
38-44
50
70
70
70
Width
1000
1200
1200
1200
Depth
900
900
900
900
Height
380
380
380
380
220-240v,
220-240v,
220-240v,
220-240v,
EXTERNAL STATIC PRESSURE (Pa) - Lo-Mi-Hi
NOISE (dBA)
Lo-Hi
WEIGHT (kg)
DIMENSIONS (mm)
ELECTRICAL SUPPLY
50Hz
50Hz
50Hz
50Hz
Single
Single
Single
Single
Heating
1.47
2.34
2.34
2.35
Cooling
1.47
2.34
2.34
2.35
FUSE RATING (BS88) - HRC (A)
6
6
6
6
MAINS CABLE No. Cores
3
3
3
3
PHASE
RUNNING CURRENT (A)
Page 176
PEFY-P80, 100, 125, 140VMH-E
Upper View
>
PEFY-P-VMH-E
Side View
>
City Multi Range 2008
Dimensions
Page 177
PCFY-P-VGM-E
Ceiling Suspended Indoor Unit
Designed for ultra-quiet operation and easy maintenance, the unit provides comfor table air conditioning
for a wide range of applications where floor or wall space cannot be used practically.
I
Indoor unit designed for direct ceiling suspension
I
Flush to wall installation for concealment of service connections
I
Drain piping can be connected from left or right
Technical Information
PCFY-P-VGM-E - INDOOR UNIT
MODEL REFERENCE
PCFY-P40VGM-E
PCFY-P63VGM-E
PCFY-P100VGM-E
PCFY-P125VGM-E
Heating (nominal)
5.0
8.0
12.5
16.0
Cooling (nominal)
4.5
7.1
11.2
14.0
Heating (UK)
4.6
7.4
11.6
14.8
Cooling (UK)
4.3
6.7
10.6
13.2
High Sensible
Cooling (UK)
3.3
5.2
8.1
10.2
SHF
(UK)
0.72
0.72
0.71
0.70
High Sensible
(UK)
0.79
0.79
0.77
0.76
POWER INPUT (kW)
Heating (nominal)
0.10
0.13
0.16
0.24
Cooling (nominal)
0.10
0.13
0.16
0.24
CAPACITY (kW)
AIRFLOW (m3/min)
Lo-Mi1-Mi2-Hi
8-10-11-12
12-14-16-18
18-20-23-25
26-28-32-35
NOISE (dBA)
Lo-Mi1-Mi2-Hi
29-33-36-38
32-34-37-39
36-38-41-43
37-39-42-44
27
34
37
43
Width
1000
1310
1310
1620
Depth
680
680
680
680
Height
210
210
270
270
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
WEIGHT (kg)
DIMENSIONS (mm)
ELECTRICAL SUPPLY
PHASE
Single
Single
Single
Single
Heating
0.46
0.60
0.73
1.10
Cooling
0.46
0.60
0.73
1.10
FUSE RATING (BS88) - HRC (A)
6
6
6
6
MAINS CABLE No. Cores
3
3
3
3
RUNNING CURRENT (A)
Page 178
PCFY-P40, 63, 100, 125VGM-E
>
Front View
>
Lower View
>
PCFY-P-VGM-E
Upper View
City Multi Range 2008
Dimensions
Page 179
PKFY-P-VBM-E/VGM-E/VFM-E
Wall Mounted Indoor Units
An elegant design combined with compact dimensions and quiet operation
make the PKFY-P an ideal unit choice. Noise levels are significantly reduced
thanks to a unique airflow passage design that not only makes the unit one
of the quietest in the industry, but also suppresses condensation
and prevents mixing with secondary air.
I
Compact design - only 815mm wide (VBM-E)
I
Front grille opening for easy cleaning
I
Front power supply for easy wiring after installation
I
5-way piping provides more flexibility
in selection of installation sites
Technical Information
PKFY-P-VBM-E / VGM-E / VFM-E - INDOOR UNIT
MODEL REFERENCE
PKFY-P20VBM-E
PKFY-P25VBM-E
PKFY-P32VGM-E
PKFY-P40VGM-E
PKFY-P50VGM-E
PKFY-P63VFM-E
Heating (nominal)
2.5
3.2
4.0
5.0
6.3
8.0
Cooling (nominal)
2.2
2.8
3.6
4.5
5.6
7.1
Heating (UK)
2.3
3.0
3.7
4.6
5.8
7.4
Cooling (UK)
2.1
2.6
3.4
4.3
5.3
6.7
High Sensible
Cooling (UK)
1.6
2.0
2.6
3.3
4.1
5.2
SHF
(UK)
0.71
0.73
0.79
0.74
0.72
0.78
High Sensible
(UK)
0.75
0.80
0.88
0.82
0.78
0.85
POWER INPUT (kW)
Heating (nominal)
0.04
0.04
0.07
0.07
0.07
0.12
Cooling (nominal)
0.04
0.04
0.07
0.07
0.07
0.12
CAPACITY (kW)
AIRFLOW (m3/min)
Lo-Mi1-Mi2-Hi
4.9-5.2-5.6-5.9
4.9-5.2-5.6-5.9
8.0-9.5-10.5-11.5
8.0-9.5-10.5-11.5
9-10-11-12
15-20
NOISE (dBA)
Lo-Mi1-Mi2-Hi
29-31-34-36
29-31-34-36
33-36-38-41
33-36-38-41
34-37-40-43
39-45
10
10
16
16
16
24
Width
815
815
990
990
990
1400
Depth
225
225
235
235
235
235
Height
295
295
340
340
340
340
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
Single
Single
Single
Single
Single
Single
Heating
0.20
0.20
0.32
0.32
0.32
0.55
Cooling
0.20
0.20
0.32
0.32
0.32
0.55
FUSE RATING (BS88) - HRC (A)
6
6
6
6
6
6
MAINS CABLE No. Cores
3
3
3
3
3
3
WEIGHT (kg)
DIMENSIONS (mm)
ELECTRICAL SUPPLY
PHASE
RUNNING CURRENT (A)
Page 180
Front View
>
Right Side View
>
Right Side View
>
PKFY-P32, 40, 50VGM-E
Front View
>
PKFY-P63VFM-E
Front View
>
Right Side View
>
Page 181
City Multi Range 2008
PKFY-P20, 25VBM-E
PKFY-P-VBM-E / PKFY-P-VGM-E / PKFY-P-VFM-E
Dimensions
PFFY-P-VLRM-E
Floor Standing Concealed Indoor Unit
A compact concealed unit providing simple, effective air conditioning
in perimeter zones. The unit is easy to install and at only
220mm deep offers an unobtrusive method of delivering
highly efficient air-conditioning performance.
I
Concealed unit for hidden installation
I
Ideal for perimeter refurbishments
I
Cooling operation set temperature can be
set down to 14ºC db
Technical Information
PFFY-P-VLRM-E - INDOOR UNIT
MODEL REFERENCE
PFFY-P20VLRM-E
PFFY-P25VLRM-E
PFFY-P32VLRM-E
PFFY-P40VLRM-E
Heating (nominal)
2.5
3.2
4.0
5.0
6.3
8.0
Cooling (nominal)
2.2
2.8
3.6
4.5
5.6
7.1
Heating (UK)
2.3
3.0
3.7
4.6
5.8
7.4
Cooling (UK)
2.1
2.6
3.4
4.3
5.3
6.7
High Sensible
Cooling (UK)
1.7
2.0
2.6
3.3
4.1
5.2
SHF
(UK)
0.90
0.81
0.74
0.72
0.74
0.73
High Sensible
(UK)
1.00
0.95
0.81
0.79
0.80
0.79
POWER INPUT (kW)
Heating (nominal)
0.04
0.04
0.06
0.065
0.085
0.10
Cooling (nominal)
0.04
0.04
0.06
0.065
0.085
0.10
CAPACITY (kW)
PFFY-P50VLRM-E PFFY-P63VLRM-E
AIRFLOW (m3/min)
Lo-Hi
5.5-6.5
5.5-6.5
7-9
9-11
12-14
12-15.5
NOISE (dBA)
Lo-Hi
34-40
34-40
35-40
38-43
38-43
40-46
18.5
18.5
20
21
25
27
Width
886
886
1006
1006
1246
1246
Depth
220
220
220
220
220
220
Height
639
639
639
639
639
639
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
Single
Single
Single
Single
Single
Single
Heating
0.19
0.19
0.29
0.32
0.40
0.46
Cooling
0.19
0.19
0.29
0.32
0.40
0.46
FUSE RATING (BS88) - HRC (A)
6
6
6
6
6
6
MAINS CABLE No. Cores
3
3
3
3
3
3
WEIGHT (kg)
DIMENSIONS (mm)
ELECTRICAL SUPPLY
PHASE
RUNNING CURRENT (A)
Page 182
PFFY-P20, 25, 32, 40, 50, 63VLRM-E
Upper View
Front View
>
>
PFFY-P-VLRM-E
Side View
>
City Multi Range 2008
Dimensions
Page 183
PFFY-P-VLRMM-E
Floor Standing Concealed Indoor Unit
A compact concealed unit providing simple, effective air conditioning in perimeter zones.
The unit is easy to install and at only 220mm deep offers an unobtrusive method of
delivering highly efficient air-conditioning performance.
I
Reduced noise levels compared to
the PFFY-P-VLRM-E version
I
Cooling operation set temperature
can be set down to 14ºC db
I
Static pressure. The new unit has 3 static pressure settings
- 20/40/60Pa ideal for ducting in the perimeter zone
I
Concealed unit for hidden installation. The unit can be hidden
behind a wardrobe in a hotel, then ducted above and below
the wardrobe doors. This offers lower noise, less
disruption and a low visual impact
Technical Information
PFFY-P-VLRMM-E - INDOOR UNIT
MODEL REFERENCE
PFFY-P20VLRMM-E
PFFY-P25VLRMM-E
PFFY-P32VLRMM-E
PFFY-P40VLRMM-E
PFFY-P50VLRMM-E
PFFY-P63VLRMM-E
Heating (nominal)
2.5
3.2
4.0
5.0
6.3
8.0
Cooling (nominal)
2.2
2.8
3.6
4.5
5.6
7.1
Heating (UK)
2.3
3.0
3.7
4.6
5.8
7.4
Cooling (UK)
2.0
2.5
3.2
4.0
5.0
6.3
High Sensible
Cooling (UK)
1.6
2.0
2.6
3.3
4.1
5.2
SHF
(UK)
0.80
0.76
0.75
0.75
0.76
0.73
High Sensible
(UK)
0.88
0.80
0.81
0.79
0.80
0.79
POWER INPUT (kW)
Heating (nominal)
0.04
0.04
0.04
0.05
0.05
0.07
Cooling (nominal)
0.04
0.04
0.04
0.05
0.05
0.07
4.5-5.5-6.5
4.5-5.5-6.5
6.5-7.5-9
8-9.5-11
10-12-14
11-13-15.5
EXTERNAL STATIC PRESSURE (Pa) Lo-Mi1-Hi
20-40-60
20-40-60
20-40-60
20-40-60
20-40-60
20-40-60
NOISE (dBA) (20Pa)
31-36-40
31-36-40
27-32-37
30-36-40
32-37-41
35-40-44
18.5
18.5
20
21
25
27
Width
886
886
1006
1006
1246
1246
Depth
220
220
220
220
220
220
Height
639
639
639
639
639
639
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
PHASE
Single
Single
Single
Single
Single
Single
RUNNING CURRENT (A) Heating
0.34
0.34
0.38
0.43
0.48
0.59
Cooling
0.34
0.34
0.38
0.43
0.48
0.59
FUSE RATING (BS88) - HRC (A)
6
6
6
6
6
6
MAINS CABLE No. Cores
3
3
3
3
3
3
CAPACITY (kW)
AIRFLOW (m3/min)
Lo-Mi-Hi
Lo-Mi-Hi
WEIGHT (kg)
DIMENSIONS (mm)
ELECTRICAL SUPPLY
Page 184
PFFY-P20, 25, 32, 40, 50, 63VLRMM-E
Upper View
Front View
>
>
PFFY-P-VLRMM-E
Side View
>
City Multi Range 2008
Dimensions
Page 185
PFFY-P-VLEM-E
Floor Standing Exposed Indoor Unit
A compact cased unit providing simple, effective air conditioning
in perimeter zones. The unit is easy to install, and at only 220mm
deep offers an unobtrusive method of delivering a highly
efficient air-conditioning performance.
I
Remote controller can be incorporated into the main unit
I
Cooling operation set temperature can be
set down to 14ºC db
Technical Information
PFFY-P-VLEM-E - INDOOR UNIT
MODEL REFERENCE
PFFY-P20VLEM-E
PFFY-P25VLEM-E
PFFY-P32VLEM-E
PFFY-P40VLEM-E
Heating (nominal)
2.5
3.2
4.0
5.0
6.3
8.0
Cooling (nominal)
2.2
2.8
3.6
4.5
5.6
7.1
Heating (UK)
2.3
3.0
3.7
4.6
5.8
7.4
Cooling (UK)
2.1
2.6
3.4
4.3
5.3
6.7
High Sensible
Cooling (UK)
1.7
2.0
2.6
3.3
4.1
5.2
SHF
(UK)
0.90
0.81
0.74
0.72
0.74
0.73
High Sensible
(UK)
1.00
0.95
0.81
0.79
0.80
0.79
POWER INPUT (kW)
Heating (nominal)
0.04
0.04
0.06
0.065
0.085
0.10
Cooling (nominal)
0.04
0.04
0.06
0.065
0.085
0.10
CAPACITY (kW)
PFFY-P50VLEM-E PFFY-P63VLEM-E
AIRFLOW (m3/min)
Lo-Hi
5.5-6.5
5.5-6.5
7-9
9-11
12-14
12-15.5
NOISE (dBA)
Lo-Hi
34-40
34-40
35-40
38-43
38-43
40-46
23
23
25
26
30
32
Width
1050
1050
1170
1170
1410
1410
Depth
220
220
220
220
220
220
Height
630
630
630
630
630
630
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
Single
Single
Single
Single
Single
Single
Heating
0.19
0.19
0.29
0.32
0.40
0.46
Cooling
0.19
0.19
0.29
0.32
0.40
0.46
FUSE RATING (BS88) - HRC (A)
6
6
6
6
6
6
MAINS CABLE No. Cores
3
3
3
3
3
3
WEIGHT (kg)
DIMENSIONS (mm)
ELECTRICAL SUPPLY
PHASE
RUNNING CURRENT (A)
Page 186
PFFY-P20,25,32,40,50,63VLEM-E
Upper View
Front View
>
>
PFFY-P-VLEM-E
Side View
>
City Multi Range 2008
Dimensions
Page 187
PFFY-P-VKM-E
Floor Standing Exposed Indoor Unit
The PFFY-P-VKM-E series is extremely versatile and is designed for
wall attached installation at floor level. The auto swing vane provides
a more natural and comfortable airflow throughout the room and
the lightweight, compact design makes installation easy.
I
Pure white, slimline design
I
Upper and lower vanes for optimum,
powerful and efficient air distribution
Technical Information
PFFY-P-VKM-E - INDOOR UNIT
MODEL REFERENCE
PFFY-P20VKM-E
PFFY-P25VKM-E
PFFY-P32VKM-E
PFFY-P40VKM-E
Heating (nominal)
2.5
3.2
4.0
5.0
Cooling (nominal)
2.2
2.8
3.6
4.5
Heating (UK)
2.3
3.0
3.7
4.6
Cooling (UK)
2.1
2.6
3.4
4.3
High Sensible
Cooling (UK)
1.6
2.0
2.6
3.3
SHF
(UK)
0.81
0.77
0.71
0.70
High Sensible
(UK)
0.88
0.85
0.77
0.76
POWER INPUT (kW)
Heating (nominal)
0.025
0.025
0.025
0.028
Cooling (nominal)
0.025
0.025
0.025
0.028
CAPACITY (kW)
AIRFLOW (m3/min)
Lo-Mi1-Mi2-Hi
5.9-6.8-7.6-8.7
6.1-7.0-8.0-9.1
6.1-7.0-8.0-9.1
8.0-9.0-9.5-10.7
NOISE (dBA)
Lo-Mi1-Mi2-Hi
27-31-34-37
28-32-35-38
28-32-35-38
35-38-42-44
15
15
15
15
Width
700
700
700
700
Depth
200
200
200
200
Height
600
600
600
600
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
Single
Single
Single
Single
Heating
0.20
0.20
0.20
0.24
Cooling
0.20
0.20
0.20
0.24
FUSE RATING (BS88) - HRC (A)
6
6
6
6
MAINS CABLE No. Cores
3
3
3
3
WEIGHT (kg)
DIMENSIONS (mm)
ELECTRICAL SUPPLY
PHASE
RUNNING CURRENT (A)
Page 188
PFFY-P20,25,32,40VKM-E
Upper View
>
Front View
>
>
PFFY-P-VKM-E
Side View
City Multi Range 2008
Dimensions
Page 189
GUF-50RD3 & GUF100RD3
Lossnay Outdoor Air Processing Indoor Unit
The GUF-50RD3 and GUF-100RD3 outdoor air processing units can be used with any
of the extensive range of City Multi indoor units to provide ventilation, dust removal,
humidification and heat recovery.
I
A combination of a Lossnay & City Multi indoor in a single unit
I
Air temperature in any room can be adjusted to the desired temperature via
this unit which is used as an indoor unit of the City Multi air conditioning system
I
The ventilating and air conditioning functions are
integrated in a single unit, saving space and installation costs
I
Heat recovery helps to save energy - a benefit that’s not only good
for the environment, but also great for cutting energy costs
I
Free cooling is also available should outdoor conditions be suitable
Technical Information
OUTDOOR AIR PROCESSING INDOOR UNIT
MODEL REFERENCE
CAPACITY (kW)
GUF-50RD3
GUF-100RD3
Heating (nominal)
6.42 (2.25)
13.00 (4.70)
Cooling (nominal)
5.29 (1.66)
10.81 (3.49)
Heating (UK)
5.93 (2.08)
12.01 (4.34)
Cooling (UK)
5.03 (1.58)
10.27 (3.32)
POWER INPUT (kW)
0.265
0.505
AIRFLOW (m3/h)
Lo-Hi
400-500
800-1000
NOISE (dBA)
Lo-Hi
29.5-34.5
34-39
WEIGHT (kg)
DIMENSIONS (mm)
54
92
Width
1016
1231
Depth
1288
1580
Height
317
398
220-240v, 50Hz
220-240v, 50Hz
ELECTRICAL SUPPLY
PHASE
Single
Single
0.70-1.15
1.73-2.20
FUSE RATING (BS88) - HRC (A)
6
6
MAINS CABLE No. Cores
3
3
RUNNING CURRENT (A)
Lo-Hi
Attention
1. Nominal Condition:
Cooling/Heating capacity indicates the value of operation under the
following air condition and above air volume.
Cooling: Indoor 27ºC DB/19.5ºC WB, Outdoor 35ºC DB/24ºC WB.
Heating: Indoor 21ºC DB/14.6ºC WB, Outdoor 7ºC DB/6ºC WB.
2. UK Condition:
Summer: Indoor 21ºC, Outdoor 27ºC
Winter: Indoor 21ºC, Outdoor -1ºCWB
3. The figures in ( ) indicates the heat recovery at Lossnay core.
4. The current, input and efficiency are based on the above air volume.
5. The air nozzle noise (45º angle 1.5m ahead) is about 6dB
greater than the indicated value. (High notch).
6. Specifications may be subject to change without notice.
Page 190
GUF-50/100RD3
>
Upper View
Front View
>
>
GUF-50RD3 and GUF100RD3
Side View
City Multi Range 2008
Dimensions
Page 191
PQFY-P
VRF Heat Pump Boiler
It is well known in the air conditioning industry that heat pumps are proven to provide highly efficient cooling. However,
in line with other forward-thinking countries, such as Sweden and Switzerland, Mitsubishi Electric have now designed a
heat pump boiler to provide heating and hot water, suitable for underfloor heating or swimming pools. Heat pump
technology is largely untapped and offers great potential with incredible design flexibility, excellent use of energy and
greatly reduced CO2 emissions.
An overview of the use of Heat Pump Boilers
The cooling operation of an air conditioning system that effectively extracts heat from a space, will normally be achieved at
between 3.5 to 4.0 COP. This in itself is an efficient system. However, by recovering that heat and using it to heat up water
the efficiency of the system increases dramatically to over 6.0 COP. Without the use of a Heat Pump Boiler, these levels of
efficiency are rarely achieved in Spring and Autumn, when different rooms may need heating and cooling from the air
conditioning at the same time.
By using the VRF Heat Pump Boiler in a permanent heat recovery application, these
efficiencies are now possible all year round. This provides a reduction in running
costs and CO2 emissions, both of which play a crucial role when obtaining
planning permission as covered by the new Part L2 Legislation.
There is a further reduction in capital costs as there is very little or no requirement
for gas boilers and associated works. Particularly when the small amount of heating
required in order to boost domestic hot water from the 45ºC (produced by the
heat pump), to the required 60ºC supply temperature, can be provided by means
of electric. Thus negating the need for the installation of a gas supply entirely.
Technical Information
PQFY-P
MODEL REFERENCE
PQFY-P140
CAPACITY (kW)
Heating (nominal)
PIPE SIZE mm(in)
25.0
Gas Refrigerant
15.88 (5/8”)
19.05 (3/4”)
Liquid Refrigerant
9.52 (3/8”)
9.52 (3/8”)
22
28
Water
WEIGHT (kg)
DIMENSIONS (mm)
PQFY-P250
14.0
32
50
Width
500
610
Depth
410
510
Height
560
560
220-240v, 50Hz
220-240v, 50Hz
Single
Single
3
3
ELECTRICAL SUPPLY
PHASE
MAINS CABLE No. Cores
Unit Flow Rate & Pressure Drop
For calculating the Water Flow Rate please use the following calculation:
Capacity (kW) = Flow Rate of Water (l/s) x Specific Heat Capacity of Water x (Outlet Water Temp(ºC) - Inlet Water Temp (ºC))
Specific Heat Capacity of water is normally 4.2Kj/KgK
PQFY-P140
Flow Rate
Pressure Drop
l/s
kPA
0.38
11.72
0.45
15.86
0.53
20.69
0.61
25.51
0.68
30.34
0.76
36.54
0.83
42.75
l/s
kPA
0.61
14.48
0.76
20.69
0.91
27.58
1.06
35.16
1.21
44.13
1.36
53.09
1.52
62.06
PQFY-P250
Flow Rate
Pressure Drop
Note: The water flow rate can be above or below these values, but no pressure drop operating data can be provided.
Page 192
PQFY-P140
Front View
>
Upper View
>
Upper View
>
Front control panel not shown
City Multi Range 2008
Dimensions
PQFY-P250
Front View
>
PQFY-P
Front control panel not shown
Page 193
BC Controllers
At the heart of both the R2 and WR2 Series, the BC controller makes simultaneous heating and cooling possible.
It has the inherent ‘intelligence’ to be the system’s decision-maker.
I
Transferring energy around the system
I
Drawing on energy from the heat source units/outdoor units
I
Directing energy as requested by the individual indoor units
I
Instructs the heat source unit/outdoor unit on the amount
of refrigerant (liquid or gas) that is required to achieve
the requested cooling or heating requirements
I
Allows unique 2-pipe heat recovery application
I
HIC Circuit for improved efficiency
Technical Information
BC CONTROLLERS
MODEL REFERENCE
CMB-P104V-G
CMB-P105V-G
NUMBER OF CONNECTIONS
4
5
6
WEIGHT (kg)
24
27
29
DIMENSIONS (mm)
CMB-P106V-G
Width
648
648
648
Depth
362 + 70
362 + 70
362 + 70
Height
284
284
284
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
PHASE
Single
Single
Single
POWER INPUT (KW)
0.085
0.104
0.123
RUNNING CURRENT (A)
0.36
0.44
0.52
FUSE RATING (BS88) – HRC (A)
6
6
6
MAINS CABLE No. Cores
3
3
3
ELECTRICAL SUPPLY
Note: CMB-P-V-G units are for use with PURY-(E)P200-350 YHM-A & PQRY-P200/250YGM-A outdoor units only.
MASTER BC CONTROLLERS
MODEL REFERENCE
CMB-P108V-GA
CMB-P1010V-GA
CMB-P1013V-GA
CMB-P1016V-GA
CMB-P1016V-HA
NUMBER OF CONNECTIONS
8
10
13
16
16
WEIGHT (kg)
44
49
57
64
73
Width
1110
1110
1110
1110
1110
Depth
450 + 70
450 + 70
450 + 70
450 + 70
450 + 70
Height
289
289
289
289
289
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
PHASE
Single
Single
Single
Single
Single
POWER INPUT (KW)
0.161
0.198
0.255
0.312
0.312
RUNNING CURRENT (A)
0.68
0.83
1.07
1.30
1.30
FUSE RATING (BS88) – HRC (A)
6
6
6
6
6
MAINS CABLE No. Cores
3
3
3
3
3
DIMENSIONS (mm)
ELECTRICAL SUPPLY
Note: CMB-P-V-GA units are for use with PURY-(E)P200-650Y(S)HM-A & PQRY-P200-500YSGM-A outdoor units only. CMB-P1016V-HA unit is for use with PURY-P700-800YSHM-A outdoor units only.
SLAVE BC CONTROLLERS
MODEL REFERENCE
CMB-P104V-GB
CMB-P108V-GB
CMB-P1016V-HB
NUMBER OF CONNECTIONS
4
8
16
WEIGHT (kg)
22
32
57
Width
648
648
1098
Depth
362 + 70
362 + 70
362 + 70
Height
284
284
284
220-240v, 50Hz
220-240v, 50Hz
220-240v, 50Hz
PHASE
Single
Single
Single
POWER INPUT (KW)
0.076
0.151
0.301
RUNNING CURRENT (A)
0.32
0.63
1.26
FUSE RATING (BS88) – HRC (A)
6
6
6
MAINS CABLE No. Cores
3
3
3
DIMENSIONS (mm)
ELECTRICAL SUPPLY
Note: CMB-P1016V-HB can be connected to a CMB-P1016V-HA.
Page 194
CMB-P104, 105, 106V-G
Upper View
>
Side View
>
CMB-P108, 1010, 1013, 1016V-GA/HA
Upper View
>
Side View
>
Side View
>
City Multi Range 2008
Dimensions
CMB-P104, 108V-GB
Upper View
>
CMB-P104V-GB
CMB-P108V-GB
A
B
3
3
180
420
CMB-P1016V-HB
>
Side View
>
BC Controllers
Upper View
Page 195
PAC-AH-M-G/H Heat Pump & Cooling Only
Air Handling Unit Controller
The Air Handling Unit Controllers are an interface to allow
connection to third party manufacturer equipment.
Mitsubishi Electric City Multi outdoor units can be used
with this interface box, creating an ideal solution when a
unique air handling unit is required. The Air Handling Unit
Controllers are supplied with LEV expansion device(s).
Technical Information
PAC-AH-M-H - HEAT PUMP AHU CONTROLLER
MODEL REFERENCE
PAC-AH125M-H
MITSUBISHI ELECTRIC OUTDOOR UNIT
PAC-AH125M-H
PAC-AH140M-H
PAC-AH250M-H
PAC-AH250M-H
PUHY-(E)P200-1250Y(S)HM-A PUHY-(E)P200-1250Y(S)HM-A PUHY-(E)P200-1250Y(S)HM-A PUHY-(E)P200-1250Y(S)HM-A PUHY-(E)P200-1250Y(S)HM-A
AIR HANDLING UNIT SIZE
ALLOWED EVAPORATOR CAPACITY (kW) - Heating
ALLOWED EVAPORATOR CAPACITY (kW) - Cooling
P100
P125
P140
P200
P250
10.0 - 12.5
12.5 - 16.0
16.0 - 18.0
18.0 - 25.0
25.0 - 31.5
9.0 - 11.2
11.2 - 14.0
14.0 - 16.0
16.0 - 22.4
22.4 - 28.0
1500 - 2850
1900 - 3550
2150 - 4050
3000 - 5700
3750 - 7100
STANDARD EVAPORATOR PATH NUMBER*
4 - 5
4 - 5
5 - 6
6 - 10
8 - 10
DIMENSIONS (mm)
Width
326
326
326
326
326
( ) = Inc Mountings
Depth
117 (132)
117 (132)
117 (132)
117 (132)
117 (132)
Height
410 (430)
410 (430)
410 (430)
410 (430)
410 (430)
7
7
7
7
7
ALLOWED EVAPORATOR VOLUME (cm3)
WEIGHT (kg)
PAC-AH-M-G - COOLING ONLY AHU CONTROLLER
MODEL REFERENCE
PAC-AH140M-G
MITSUBISHI ELECTRIC OUTDOOR UNIT
PAC-AH250M-G
PAC-AH250M-G
PU(H)(R)Y-(E)P200-1250Y(S)HM-A PU(H)(R)Y-(E)P200-1250Y(S)HM-A PU(H)(R)Y-(E)P200-1250Y(S)HM-A
AIR HANDLING UNIT SIZE
P140
P200
P250
ALLOWED EVAPORATOR CAPACITY (kW)
11.2 - 16.0
15.9 - 22.4
18.7 - 28.0
ALLOWED EVAPORATOR VOLUME (cm3)
2150 - 4050
3000 - 5700
3750 - 7100
STANDARD EVAPORATOR PATH NUMBER*
5 - 6
6 - 10
8 - 10
DIMENSIONS (mm)
Width
326
326
326
( ) = Inc Mountings
Depth
117 (132)
117 (132)
117 (132)
Height
382 (420)
382 (420)
382 (420)
7
7
7
WEIGHT (kg)
Note: One air handling unit controller is required per air handling unit
Saturated refrigerant temperature at exit of evaporator = 8.5ºC, SH=5K, liquid temperature = 25ºC, air = 27ºCDB/19ºCWB
*When the diameter of the heat exchanger tube is ø9.52
Air Handling Unit Controller
(Mitsubishi Electric)
Example:
Controller (field supplied)
220-240v, 50Hz
Power Supply
M-NET wiring
Thermistor wiring
Piping
Outdoor Unit (Mitsubishi Electric)
Page 196
Air Handling Unit (field supplied)
Outdoor Units
CMY-Y102S-G2
CMY-Y102L-G2
CMY-Y202-G2
CMY-Y302-G2
CMY-Y62-G-E
CMY-Y100VBK2
CMY-Y200VBK2
CMY-Y300VBK2
CMY-R100VBK
CMY-R200VBK
ACH1
ACOUSTIC KIT
- Branch Pipe (Joint) for size 200 or below - total capacity of indoor units
- Branch Pipe (Joint) for size 201-400 - total capacity of indoor units
- Branch Pipe (Joint) for size 401-650 - total capacity of indoor units or first branch of P500-P650
- Branch Pipe (Joint) for size 651 or above - total capacity of indoor units or first branch of P700-P1250
- Branch Pipe for 2 branches (PUMY)
- Twinning Kit for PUHY-P500-650YSHM-A / PUHY-EP400-650YSHM-A
- Twinning Kit for PUHY-P700-900YSHM-A
- Twinning Kit for PUHY-P950-1250YSHM-A / PUHY-EP700-900YSHM-A
- Twinning Kit for PURY-P500-650YSHM-A / PURY-EP400-600YSHM-A
- Twinning Kit for PURY-P700-800YSHM-A
- PQFY Auto-Changeover controller
- Acoustic kits for PUHY and PURY units
4-Way Blow Cassette Units
PLP-6BA
SLP-2AA
PLP-6BALM
PLP-6BAJ
PAC-SA1ME-E
PAR-SA9FA-E
S70E40714
- Grille for PLFY-P-VBM-E
- Grille for PLFY-P-VCM-E
- Grille and infra-red controller for PLFY-P-VBM-E
- Grille with filter lowering function for PLFY-P-VBM-E
- ‘I -See Sensor’ corner panel for PLFY-P-VBM-E
- Infra-red signal receiver for PLFY-P-VBM-E
- Infra-red Controller (PAR-SL97A-E) for PLFY-P-VBM-E
2-Way Blow Cassette Units
CMP-P40VLW-B
CMP-P63VLW-B
CMP-P100VLW-B
CMP-P125VLW-B
PAC-KH11OF
-
1-Way Blow Cassette Units
PMP-40BM
- Grille for PMFY-P-VBM-E
Ceiling Concealed Ducted Units
PAC-KE03DM-F
PAC-KE04DM-F
PAC-KE88LAF
PAC-KE89LAF
PAC-KE80TB-F
PAC-KE140TB-F
-
BC Controllers
CMY-R160-J
CMY-Y102S-G
- Joint pipe
- Branch pipe
Indoor Units
PAC-SE41TS-E
- Remote sensor
Grille for PLFY-P20-40VLMD-E
Grille for PLFY-P50-63VLMD-E
Grille for PLFY-P80-100VLMD-E
Grille for PLFY-P125VLMD-E
OA duct flange for PLFY-P20-100VLMD-E
City Multi Range 2008
Accessories / Optional Extras
Air Handling Unit Controllers / Accessories
Drain lift-up mechanism for PEFY-P-VMM-E
Drain lift-up mechanism for PEFY-P-VMH-E
Long life filter for PEFY-P80VMH-E
Long life filter for PEFY-P100-140VMH-E
Filter box for PEFY-P80VMH-E (necessary when long life filter is used)
Filter box for PEFY-P100-140VMH-E (necessary when long life filter is used)
Page 197
Controls
A comprehensive range of control options
The importance of
The need for control is paramount
in order to optimise the performance
of any air conditioning system
and minimise its running costs.
Mitsubishi Electric offer a wide
range of control options designed
to do just this.
Operating an air conditioning system without
the right control can prove costly. It’s therefore
important to ensure that every system is
correctly specified to the degree of control it
requires. Mitsubishi Electric have a wide range
of controls available ‘off-the-shelf ’ and where
needed, individual control systems can be
specifically designed to suit.
Good controls will benefit any application, large
or small. Air conditioning products need to
react to a variety of factors: different room
sizes, usage and staff levels; changes in the
climate; electronic equipment and lighting ... the
list goes on. So whatever the application,
optimum control of air conditioning systems
is essential and will result in a constant,
comfortable environment, which in turn is both
energy and cost efficient.
Page 220
A degree of
difference
When an air conditioning system is not properly
controlled, it will not run as efficiently as it should.
For every degree that the system deviates from
the required temperature, energy costs can rise
by up to 5%. Specify one of the many control
options from Mitsubishi Electric to ensure
air conditioning works as intended, whilst giving
the optimum amount of control.
The simpler
the better
With the array of comprehensive control
systems available from Mitsubishi Electric,
it becomes simple to design and install air
conditioning systems. From a simple hand held
controller to a G50 system - you are in control.
Control
Controlled
In accordance with the requirements of part L2 in the Building Regulations, our control systems
provide the optimum control available, combined with the most efficient use of energy.
performance
A wide range of
Controls options
The need for control is paramount in order
to optimise the performance of any air conditioning
system and minimise its running costs.
Mitsubishi Electric offer a wide range of
control options designed to do just this.
Simple technology
at its best
Page 222
Contents
224
Remote Controllers
225
Programmable Timer
226
System Controller
227
Interfaces
228
G50 Controller, Centralised Controller
229
AG150 Controller, Centralised Controller
230
GB50 Controller, Centralised Controller
231
G50/GB50/AG150 Controller, Web Screenshots
232
G50/GB50/AG150 Desktop Remote Controller
233
G50/GB50/AG150 Third Party Equipment Interfaces
234
G50/GB50/AG150 Programmable Logic Controller (PLC)
235
TG2000 Software, PC Based Software Package
236
TG2000 Software with Energy Monitoring
237
TG2000 Software with Third Party Equipment
238
TG2000 WAN Software (Wide Area Network)
239
TG2000, Screenshots
240
BEMS BACnet® Interface (BAC-IP/50)
241
BEMS BACnet® Mr Slim Interface (BAC-A/50)
242
BEMS LonWorks® Interface (LMAP)
243
BEMS Modbus Interfaces (IP-32/50/100M)
244
BEMS Modbus Mr Slim Interface (A32M)
245
BEMS Modbus Splits Interface (A1M)
246
BEMS KNX-EIB Interfaces (KNX-EIB-IP-15/100)
247
BEMS KNX-EIB Splits Interface (KNX-EIB-A-1)
248
M2M - Machine 2 Machine Interface (Maxi M2M-IP/50)
249
M2M - Machine 2 Machine Splits Interface (Mini M2M-A/16)
250
M2M - Machine 2 Machine Web Screenshots
251
G50 Control Panels
252
Run / Standby Control Panels
253
Energy Monitoring Control Panels
254
Split-System A2M Interfaces
Page 223
Remote Controllers
Our air conditioning systems are supported by a multitude of remote controllers. Each remote controller type,
whilst being able to support the general control and monitoring functions for a group of indoor units, can also offer
other unique operational features.
PAC-YT51CRA
PAC-SE51CRA
BS-51COV
PC-51COV
PB-51COV
PAR-21MAA
PAR-F27MEA
PAR-FL32MA
Technical Information
Remote Controllers
FUNCTION
DESCRIPTION
ON/OFF
Run and Stop operation for a single group
MODE SELECTION
Switches between Cool/Dry/Auto/Fan/Heat.
Operation mode will vary depending on the
indoor unit. Auto mode is available with only
R2 and WR2 systems
PAC-YT51CRA PAC-SE51CRA
PAR-21MAA
PAR-F27MEA
PAR-FL32MA
Operation
Display
Operation
Display
Operation
Display
Operation
Display
Operation
Display
TEMPERATURE
SETTING
Sets the groups temperature control.
Cool/Dry: 19-30°C
Heat: 17-28°C
Auto: 19-28°C
FAN SPEED SETTING
4 speed - Lo-Mi1-Mi2-Hi
2 speed - Lo-Hi
SETPOINT LIMIT
Limit the setpoint range
AIRFLOW DIRECTION
Air Flow angles:100º-80º-60º-40º
and auto swing
INDEPENDENT VANE
CONTROL
Only available with PLA-RP-BA, PLFY-P-VBM-E
and PLFY-P-VCM-E
TIMER OPERATION
ON/OFF time can be set.
Daily
Daily
Daily
Daily
PERMIT / PROHIBIT
FUNCTION
Run/Stop, Temperature Setting, Mode Selection
and Filter Reset functions can be prohibited
via a higher level system controller
INDOOR RETURN
AIR TEMPERATURE
Measures the intake temperature of
the master unit within the group
Weekly
Weekly
ERROR INDICATION
Displays a 4 digit code and the affected unit address
TEST RUN FUNCTION
Allows each unit within the group
to operate in test mode
VENTILATION
INTERLOCK
Allows the group to be interlocked
with a heat recovery Lossnay unit
OPTIONAL COVER
Brushed Stainless Steel
Polished Chrome
Polished Brass
CONTACT NUMBER
UNDER FAULT
CONDITIONS
Displays under fault condition, the fault code
of the unit with its address and the contact
number to call
MULTIPLE LANGUAGES
English, Italian, Spanish, French, German,
Russian, Chinese and Japanese
CLOCK DISPLAY
Displays time
BUTTON LOCK
Able to lock all controller buttons, or
all controller buttons except On/Off
EASY MAINTENANCE
WITH MR SLIM
Able to monitor information about the
compressor (running current, running time,
On/Off time). Also able to monitor sensors:
h-exh, outdoor outlet, outdoor temp, indoor inlet,
indoor h-exh and filter use number of hours
RUN / STANDBY WITH
MR SLIM
Able to switch over two systems every week.
If one fails, the other system starts. If the
temperature is too high, the two systems start.
COMPATIBILITY
Compatible with:
DIMENSIONS - mm
(WxDxH)
Page 224
Mr Slim or
M Series (via MAC-397IF)
City Multi
Mr Slim or
M Series (via MAC-397IF)
City Multi
City Multi,
Mr Slim or
M Series (via MAC-397IF)
120x41x70
120x41x70
130x19x120
130x19x120
157x18x57
Controls Range 2008
Programmable Timer
Mitsubishi Electric controllers are complimented by a weekly programmable timer, being able
to control up to fifty indoor units. The PAC-YT34STA also has hardwired connection
available (On/Off input, fire alarm input, run output, fault output).
PAC-YT34STA
PAC-YT34STA
PAC-SC50KUA
Technical Information
Programmable Timer
DESCRIPTION
Max No. of Indoor Units
PAC-YT34STA
50 units/50 groups
50 units/50 groups
Operation
Display
ON/OFF
Run and Stop operation
MODE SELECTION
Switches between Cool / Heat
TEMPERATURE SETTING
Sets the groups temperature control.
Cool/Dry: 19-30°C
Heat: 17-28°C
Auto: 19-28°C
CURRENT TIME
Set the time
ERROR INDICATION
Displays a 4 digit code and the affected
unit address
EXTERNAL INPUT
Hardwired connections available
EXTERNAL OUTPUT
Hardwired connections available
COMPATIBILITY
Compatible with:
DIMENSIONS - mm
(WxDxH)
On/Off or Fire Alarm
Run/Faults
City Multi or Mr Slim via PAC-SF80MA or M Series via MAC-399IF
130x19x120
NOTE: Units can only be controlled from the scheduling options. When the remote On/Off hardwired input is used, the On/Off remote controller buttons will be deactivated (centrally controlled).
Page 225
Remote Controllers / Programmable Timer
FUNCTION
UNITS
System Controller
One system controller is available for use when you need to control up to fifty indoor units from one location.
The PAC-SF44SRA also has hardwired connection available (On/Off input, fire alarm input, run output, fault output).
PAC-SF44SRA
PAC-SF44SRA
PAC-SC50KUA
Technical Information
System Controller
FUNCTION
DESCRIPTION
UNITS
Max No. of Indoor Units
PAC-SF44SRA
50 units/50 groups
50 units/50 groups
Operation
Display
ON/OFF
Run and Stop operation
MODE SELECTION
Switches between Cool/Dry/Auto/Fan/Heat.
Operation Mode will vary depending on the
indoor unit. Auto mode is available with
only R2 and WR2 systems
TEMPERATURE
SETTING
Sets the groups temperature control.
Cool/Dry: 19-30°C
Heat: 17-28°C
Auto: 19-28°C
FAN SPEED SETTINGS
4 speed - Lo-Mi1-Mi2-Hi
2 speed - Lo-Hi
AIR FLOW DIRECTION
Air Flow angles: 100º-80º-60º-40º and auto swing
PERMIT/PROHIBIT
FUNCTION
Run/Stop, Temperature Setting, Mode Selection
and Filter Reset functions can be prohibited
INDOOR RETURN
AIR TEMPERATURE
Measures the intake temperature of the
master unit within the group
ERROR INDICATION
Displays a 4 digit code and the affected
unit address
VENTILATION
INTERLOCK
Allows the group to be interlocked
with a heat recovery Lossnay unit
EXTERNAL INPUT
Hardwired connections available
EXTERNAL OUTPUT
Hardwired connections available
COMPATIBILITY
Compatible with:
DIMENSIONS - mm
(WxDxH)
On/Off or Fire Alarm
Run/Faults
City Multi or Mr Slim via PAC-SF80MA or M Series via MAC-399IF
130x19x120
NOTE: When the remote On/Off hardwired input is used, the On/Off remote controller buttons will be deactivated (centrally controlled).
Page 226
A range of newly created interfaces are now available for use when connecting to third party controllers.
TCB1
DIDO
TCB1
DIDO
Controls Range 2008
Interfaces
Technical Information
Interfaces
TCB1
DESCRIPTION
Control
ON/OFF BUT
CENTRALLY
CONTROLLED
ON/OFF control. Remote controller
ON/OFF button deactivated
ON/OFF BUT
NOT CENTRALLY
CONTROLLED
ON/OFF control. Remote controller
ON/OFF button activated
TEMPERATURE
SETTINGS
Sets the groups temperature control.
Cool/Dry: 19-30°C
Heat: 17-28°C
Auto: 19-28°C
DIDO
Monitor
MS-FRT-TCB-TEMP
Monitor
Control
Monitor
(analogue 0 to 10VDC)
ERROR INDICATION
HEATING
INTERLOCKING
A supplied remote sensor is installed
on the wet system radiator to
prevent the air conditioning
running while heating
COMPATIBILITY
Interface compatible with:
DIMENSIONS - mm
(WxDxH)
Control
Mr Slim
City Multi
Mr Slim
City Multi
Mr Slim
80x45x80
130x19x120
130x19x120
Page 227
System Controller / Interfaces
FUNCTION
G50 Controller
Centralised Controller with WebServer Capabilities
The G50 centralised controller was the first of its kind in the industry to utilise Ethernet Technology. By using Internet
Explorer as its local or remote software, the G50 gives you instant access to all your control functions from the comfort of
your own PC. The G50 can control up to 50 indoor units and can take the place of local remote controllers, offering
the same level of monitoring and control. The G50 has many functions as standard but can also have further features
activated via Pin Codes.
M-NET
G50
ETHERNET
PAC-SC50KUA
Viewed using Microsoft® Internet Explorer
Technical Information
G50 Controller
FUNCTION
DESCRIPTION
OPERATION PLATFORM
Pentium III, CPU 1000 Mhz, 256 MB RAM, 6GB or more. Internal LAN 10/100 MBps running Windows Professional 2000
service pack 4 or Windows Professional XP service pack 2 or Windows Vista
MAX No. OF INDOOR UNITS
Up to 50 indoor units can be connected
ON/OFF
Run and Stop operation for a single group
MODE SELECTION
Switches between Cool/Dry/Auto/Fan/Heat. Operation Mode will vary depending on the indoor unit.
Auto mode is available with only R2 and WR2 systems
TEMPERATURE SETTING
Sets the groups temperature control. Cool/Dry: 19-30°C, Heat:17-28°C, Auto: 19-28°C
FAN SPEED SETTING
4 speed: Lo-Mi1-Mi2-Hi, 2 speed: Lo-Hi
AIR FLOW DIRECTION
Air Flow angles:100º-80º-60º-40º and auto swing
TIMER OPERATION
Weekly. Maximum of 3 time sequences with 3 Start/Stop times per day for all groups can be allocated
PERMIT/PROHIBIT FUNCTION
Individual prohibit operations for each remote controller function (Run/Stop,Temperature Setting, Mode Selection
and Filter Reset) can be activated
INDOOR RETURN AIR TEMPERATURE
Displays the measured intake temperature from each group
ERROR INDICATION
Displays a 4 digit code and the affected unit address. An error log is held showing the last 64 date stamped alarms
TEST RUN FUNCTION
Allows each unit within the group to operate in test mode
VENTILATION INTERLOCK
Allows the group to be interlocked with a heat recovery Lossnay unit
WEB SETPOINT LIMIT
Reduce the setpoint band of each individual unit (e.g. 23ºC to 25ºC)
WEB AUTO CHANGEOVER
Automatically switch heat pump outdoor unit to cooling or heating mode depending on the requirements
WEB INITIAL SETTING
Commission the G50 from the web pages
WEB LOGIN
Administrator able to allow specific function access to guest
EXTERNAL INPUT/OUTPUT
Hardwired connections are available for :
POWER SUPPLY PACK
PAC-SC50KUA
COMPATIBILITY
City Multi or Mr Slim via PAC-SF80MA or M Series via MAC-399IF
DIMENSIONS - mm
(WxDxH)
Inputs:
Level Signal-Batch Start/Stop, Batch Emergency Stop
Outputs: Start/Stop Status, Error/Normal Status
300x79x120
G50 Software Options - Pin Code Activation
G50
G50
G50
G50
- Web Monitor
- Email
- AS
- EC
Page 228
Control and Monitor the G50 via Internet Explorer
Enable E-mail activation on fault conditions
Weekly / Annual Scheduling and Night Set Back
Energy Charge
G50 - ES
G50 - PC
G50 - VRC
Energy Saving Capability
Peak Cut Control
Virtual Remote Controllers
NEW in September 2008
Touch Screen Centralised Controller with WebServer Capabilities
The new AG150 Mitsubishi Electric centralised controller offers a large 9 inch touch screen display with easy control
of up to 50 indoor units. The AG150 can calculate the energy used for each system, zone or indoor unit. The
refrigerant status check function can be activated regularly (in conjuction with the new YHM-A City Multi range)
and an Internet connection with SSL security is also available to monitor and control the AG150 remotely and
receive Email under fault conditions.
M-NET
AG150
ETHERNET
PAC-SC51KUA
Viewed using Microsoft® Internet Explorer
Technical Information
Controls Range 2008
AG150 Controller
AG150 Controller
FUNCTION
TOUCH SCREEN
Wide high resolution 9” touch screen
OPERATION PLATFORM
Pentium III, CPU 1000 Mhz, 256 MB RAM, 6GB or more. Internal LAN 10/100 MBps running
Windows Professional 2000 service pack 4 or Windows Professional XP service pack 2 or Windows Vista
MAX No. OF INDOOR UNITS
Up to 50 indoor units can be connected
ON/OFF
Run and Stop operation for a single group
MODE SELECTION
Switches between Cool/Dry/Auto/Fan/Heat. Operation Mode will vary depending on the indoor unit.
Auto mode is available with only R2 and WR2 systems
TEMPERATURE SETTING
Sets the groups temperature control. Cool/Dry: 19-30°C, Heat:17-28°C, Auto: 19-28°C
FAN SPEED SETTING
4 speed: Lo-Mi1-Mi2-Hi, 2 speed: Lo-Hi
AIR FLOW DIRECTION
Air Flow angles:100º-80º-60º-40º and auto swing
TIMER OPERATION
Annual or weekly. Night set back option available allowing the setpoint to be set to 12ºC
PERMIT/PROHIBIT FUNCTION
Individual prohibit operations for each remote controller function (Run/Stop,Temperature Setting,
Mode Selection and Filter Reset) can be activated
INDOOR RETURN AIR TEMPERATURE
Displays the measured intake temperature from each group
ERROR INDICATION
Displays a 4 digit code and the affected unit address. An error log is held showing the last 64 date stamped alarms
TEST RUN FUNCTION
Allows each unit within the group to operate in test mode
VENTILATION INTERLOCK
Allows the group to be interlocked with a heat recovery Lossnay unit
WEB SETPOINT LIMIT
Reduce the setpoint band of each individual unit (e.g. 23ºC to 25ºC)
WEB AUTO CHANGEOVER
Automatically switch heat pump outdoor unit to cooling or heating mode depending on the requirements
WEB INITIAL SETTING
Commission the G50 from the web pages
WEB LOGIN
Administrator able to allow specific function access to guest
WEB REFRIGERANT STATUS CHECK
Activate refrigerant volume checking function on Modular City Multi systems
ENERGY CHARGING
Able to create bills for individual indoor units, groups of indoor units or a complete system (Optional) via the PAC-YG60MCA
ENERGY SAVE CONTROL
Individual indoor unit, group of indoor units or a complete system can be controlled.
There are various energy saving options available (Optional)
LOAD SHEDDING
Activate energy saving mode when energy consumption is too high
EXTERNAL INPUT/OUTPUT
Hardwired connections are available for :
POWER SUPPLY PACK
PAC-SC51KUA
COMPATIBILITY
City Multi or Mr Slim via PAC-SF80MA or M Series via MAC-399IF
DIMENSIONS - mm
(WxDxH)
Inputs:
Level Signal-Batch Start/Stop, Batch Emergency Stop
Outputs: Start/Stop Status, Error/Normal Status
300x62x175
AG150 Software Options - Pin Code Activation
AG150 - Basic
AG150 - Energy
AG150 - VRC
Web monitoring, Email, Annual scheduling
Energy monitoring, energy saving, load shedding
Virtual remote controllers
Page 229
G50 Controller / AG150 Controller
DESCRIPTION
GB50 Controller
Centralised Controller with WebServer Capabilities
The GB50 has been developed to access all your control functions from the comfort of your own PC,
without the need for a controller keypad or LCD display and at a very competitive price.
M-NET
GB50
ETHERNET
PAC-SC50KUA
Viewed using Microsoft® Internet Explorer
Technical Information
GB50 Controller
FUNCTION
DESCRIPTION
OPERATION PLATFORM
Pentium III, CPU 1000 Mhz, 256 MB RAM, 6GB or more. Internal LAN 10/100 MBps running
Windows Professional 2000 service pack 4 or Windows Professional XP service pack 2 or Windows Vista
MAX No. OF INDOOR UNITS
Up to 50 indoor units can be connected
ON/OFF
Run and Stop operation for a single group
MODE SELECTION
Switches between Cool/Dry/Auto/Fan/Heat. Operation Mode will vary depending on the indoor unit.
Auto mode is available with only R2 and WR2 systems
TEMPERATURE SETTING
Sets the groups temperature control. Cool/Dry: 19-30°C, Heat:17-28°C, Auto: 19-28°C
FAN SPEED SETTING
4 speed: Lo-Mi1-Mi2-Hi, 2 speed: Lo-Hi
AIR FLOW DIRECTION
Air Flow angles:100º-80º-60º-40º and auto swing
TIMER OPERATION
Annual or weekly. Night set back option available allowing the setpoint to be set down to 12ºC
PERMIT/PROHIBIT FUNCTION
Individual prohibit operations for each remote controller function (Run/Stop,Temperature Setting, Mode Selection
and Filter Reset) can be activated
INDOOR RETURN AIR TEMPERATURE
Displays the measured intake temperature from each group
ERROR INDICATION
Displays a 4 digit code and the affected unit address. An error log is held showing the last 64 date stamped alarms
TEST RUN FUNCTION
Allows each unit within the group to operate in test mode
VENTILATION INTERLOCK
Allows the group to be interlocked with a heat recovery Lossnay unit
WEB SETPOINT LIMIT
Reduce the setpoint band of each individual unit (e.g. 23ºC to 25ºC)
WEB AUTO CHANGEOVER
Automatically switch heat pump outdoor unit to cooling or heating mode depending on the requirements
WEB INITIAL SETTING
Commission the GB50 from the web pages
WEB LOGIN
Administrator able to allow specific function access to guest
EXTERNAL INPUT/OUTPUT
Hardwired connections are available for :
POWER SUPPLY PACK
PAC-SC50KUA
COMPATIBILITY
City Multi or Mr Slim via PAC-SF80MA or M Series via MAC-399IF
DIMENSIONS - mm
(WxDxH)
250x38x130
GB50 Software Options - Pin Code Activation
G50
G50
G50
G50
- EC
- ES
- PC
- VRC
Page 230
Energy Charge
Energy Saving Capability
Peak Cut Control
Virtual Remote Controllers
Inputs:
Level Signal-Batch Start/Stop, Batch Emergency Stop
Outputs: Start/Stop Status, Error/Normal Status
Login
Monitor Air Conditioning - Overview
Access to the web pages is secured using a customised
username and password.
The first screen allows you to monitor all the units connected to the
G50/AG150/GB50. Each icon displays On/Off, Faults and timer On/Off.
Monitor Air Conditioning - Block view
Remote Controller Settings
Each area of the building can be displayed with information
about On/Off, Setpoint, Mode and Temperature.
Click on any icons in the Monitor View page to access the
remote controller. Lossnay units can also be controlled.
Buttons on the local controllers may be locked
(On/Off, Mode, Setpoint, Filter Reset).
Monitor Fault Codes
Scheduling may be set from the web pages.
A night set back operation is available (Heat, 12ºC).
Optional on the G50, standard on the AG150/GB50.
Faults with the unit address can be displayed under
fault conditions. Email status can also be shown.
Multiple Users (VRC PIN code)
Multiple Users (VRC PIN code)
If the G50/AG150/GB50 is connected to an office LAN, the
staff will then be able to access the web pages. With VRC each
member of staff will have their own username and password.
Installation costs will be reduced as no wall remote
controllers will need to be purchased and installed.
GB50 Controller /
G50/AG150/GB50 Web Screenshots
Daily, Weekly and Annual Scheduling
(AS PIN code)
Controls Range 2008
G50/AG150/GB50 Controller Web Screenshots
New icons now available to suit model type installed
Page 231
G50/AG150/GB50
Desktop Remote Controller
More and more customers are using the G50/GB50 controller directly from their computers, so Mitsubishi Electric has
launched a new, even simpler alternative which presents the customer with what looks like a standard remote controller
interface - on their PC desktop. Called the PAR-21PC, the new application can also be minimised in the Desktop Toolbar,
just like other Windows applications, so that the customer can have immediate control with just one click of the mouse.
M-NET
*NOTE 1
ETHERNET
PAC-SC50KUA
Technical Information
PAR-21PC Desktop Remote Controller
FUNCTION
DESCRIPTION
OPERATION PLATFORM
Pentium III, CPU 1000 Mhz, 256 MB RAM, 6GB or more. Internal LAN 10/100 MBps running
Windows Professional 2000 service pack 4or Windows Professional XP service pack 2 or Windows Vista
MAX No. OF INDOOR UNITS
Up to 16 indoor units within a group
ON/OFF
Run and Stop operation for a single group
MODE SELECTION
Switches between Cool/Dry/Auto/Fan/Heat. Operation Mode will vary depending
on the indoor unit. Auto mode is available with only R2 and WR2 systems
TEMPERATURE SETTING
Sets the groups temperature control. Cool/Dry: 19-30°C, Heat:17-28°C, Auto: 19-28°C
FAN SPEED SETTING
4 speed: Lo-Mi1-Mi2-Hi, 2 speed: Lo-Hi
AIR FLOW DIRECTION
Air Flow angles:100º-80º-60º-40º and auto swing
CLOCK DISPLAY
Displays the time on the desktop controller
INDOOR RETURN AIR TEMPERATURE
Displays the measured intake temperature from each group
ERROR INDICATION
Displays a 4 digit code and the affected unit address.
TIMER OPERATION
Weekly. Maximum of 3 time sequences with 3 Start/Stop times per day for all groups can be allocated
*NOTE 1: Applicable with G50 / PAC-SC50KUA or AG150 / PAC-SC51KUA or GB50 / PAC-SC50KUA
Page 232
The new third party equipment interfaces allow the user to monitor and control third party equipment
from the G50/GB50 web pages.
ETHERNET
*NOTE 1
PAC-YG66DCA
PAC-YG63MCA
EQUIPMENT 1
EQUIPMENT 2
SENSOR 1
SENSOR 2
Technical Information
Third Party Interfaces
DESCRIPTION
PAC-YG66DCA
PAC-YG63MCA
MAX No. OF INPUTS
-
2 x Digital
2 x Analogue
MAX No. OF OUTPUTS
-
2 x Digital
-
MAX No. OF EQUIPMENT
-
2
-
POWER SUPPLY
Power supply required
24VDC
24VDC
MONITOR
From G50/GB50 web pages
or TG2000
Run / Faults
Temperature / Humidity
CONTROL
From G50/GB50 web pages
or TG2000
On/Off
-
SIGNAL
Signal required to monitor
and control equipment
Volt free contact
Temperature 4-20mA / 1-5V / 0-10V / Pt100
Humidity 4-20mA / 1-5V / 0-10V
200x45x120
200x45x120
DIMENSIONS - mm
(WxDxH)
-
General Equipment
Temperature / Humidity
Third party equipment can be monitored and controlled
from the web pages.
Temperature and humidity can be monitored.
Trend Logging
Temperature / Humidity Limit
Temperature and humidity can be recorded and displayed.
Limit (high and low) can be set to trigger alarms via email.
G50/AG150/GB50 Desktop Remote Controller /
G50/AG150/GB50 Third Party Equipment Interfaces
FUNCTION
Controls Range 2008
G50/AG150/GB50
Third Party Equipment Interfaces
*NOTE 1: Applicable with G50 / PAC-SC50KUA or AG150 / PAC-SC51KUA or GB50 / PAC-SC50KUA
NOTE 2: Temperature Sensors and Humidity Sensors not supplied by MEUK
Page 233
G50/AG150/GB50
Programmable Logic Controller
The PLC controller allows a hotel (for example) to have more accurate control over its air conditioning. The PLC
works in conjunction with the key card system installed in each bedroom in many hotels. When the room is occupied,
the PLC will switch ON the unit and reset the air conditioning to predetermined settings (for instance AUTO, 21ºC).
When the room is unoccupied, the PLC will monitor the temperature in the room. If the temperature is too low or
too high, the PLC will restart the unit.
M-NET
*NOTE 1
ETHERNET
PAC-SC50KUA
Ving Card
Ving Card
Ving Card
PLC
Technical Information
PLC-QSERIES-LSPD
FUNCTION
DESCRIPTION
MAX No. OF INDOOR UNITS
Up to 200 indoor units
ON/OFF
Run and Stop operation for a single group
MODE SELECTION
Switches between Cool/Dry/Auto/Fan/Heat. Operation Mode will vary depending on the indoor unit.
Auto mode is available with only R2 and WR2 systems
TEMPERATURE SETTING
Sets the groups temperature control. Cool/Dry: 19-30°C, Heat:17-28°C, Auto: 19-28°C
PERMIT/PROHIBIT SETTING
Individual prohibit operations for each remote controller function (Run/Stop,Temperature Setting,
Mode Selection and Filter Reset) can be activated
OCCUPIED ROOM SETTING
ON, AUTO, 21ºC (Factory setting)
UNOCCUPIED ROOM SETTING
If the temperature is below 16ºC
the PLC restarts the unit to ON,
HEAT, 19ºC and stops the unit
when the temperature has reached
18ºC (Factory setting)
COMPATIBILITY
City Multi only
DIMENSIONS - mm (WxDxH)
198x44x98
If the temperature is above 26ºC
the PLC restarts the unit to ON,
COOL, 21ºC and stops the unit
when the temperature has reached
24ºC (Factory setting)
*NOTE 1: Applicable with G50 / PAC-SC50KUA or AG150 / PAC-SC51KUA or GB50 / PAC-SC50KUA
NOTE 2: It may take up to 3 minutes to switch ON the indoor unit (this time depends on how many indoor units are connected to the PLC).
Page 234
PC Based Software Package
The TG2000 centralised PC based graphical software package allows the operator to control and
monitor up to a maximum of 2000 indoor units. This software has been designed to connect directly to
an air conditioning system via the G50/GB50 controller, allowing the operator the required functionality
to control and monitor the complete air conditioning system from a central location.
M-NET
*NOTE 1
ETHERNET
PAC-SC50KUA
Controls Range 2008
TG2000 Software
Technical Information
FUNCTION
DESCRIPTION
OPERATING PLATFORM
Pentium III, CPU 1000 Mhz, 256 MB RAM, 6GB or more. Internal LAN 10/100 MBps running
Windows Professional 2000 service pack 4 or Windows Professional XP service pack 2 or Windows Vista
MAX No. OF INDOOR UNITS
2000 Indoor units, 50 indoor units per G50/AG150/GB50
OPERATIONAL SECTIONS
The software package is split into two distinctive areas, System and Controls setting. System Setting: Password
protected, System Configuration and group/block organisation, printer setting. Controls Setting: Normal Operation,
monitoring and control functions as described below. The software allows individual indoor units to be allocated
to logical groups, represented within user definable graphics screens, allocated during the system configuration
ON/OFF
Indicates the On/Off status of each group within the selected graphical screen or entire building
OPERATION MODE
Indicates the operational mode (Cool, Heat, Fan, Dry, Auto) for each group on the selected graphical screen
SET TEMPERATURE
Displays the set temperature for each group on the selected graphical screen.
Also able to limit the set point range in both heating and cooling mode
AIR SPEED
Displays the current fan speed setting for each group on the selected graphical screen
REMOTE CONTROLLER
PROHIBIT/PERMIT
Displays the current prohibit/permit status for each groups remote controller on the selected graphical screen
ABNORMALITY (FAULT) MONITORING
Individual indoor unit fault monitoring is recorded within the fault log for both viewing and printing.
Fault monitoring can also be viewed via the fault log for all units associated with a particular graphical screen
or the entire building. Faults can also be tracked and printed using date of failure, date of recovery and error code
ROOM TEMPERATURE MONITORING
Displays the return air temperature of the master indoor unit within a group
SCHEDULED ON/OFF
On/Off schedules can be set for each group, each graphical screen or the entire building
ENERGY SAVE CONTROL
Individual indoor unit, group of indoor units or a complete system can be controlled. There are various energy
saving options available (Optional)
TREND LOGGING
Able to log: Return air temperature, setpoint, mode, On/Off, power consumption by group or by indoor unit,
watt-hour meter and then email to customer
GRAPHICAL SCREENS
The complete system configurations can be allocated between multiple screens. Each screen can display a
bitmap image representing the area of the building or floor where the units or groups are physically located
EMAIL
The following information may be sent regularly and automatically via email: energy monitoring data, energy saving data,
trend logging data (temperatures etc) and fault code history
*NOTE 1: Applicable with G50 / PAC-SC50KUA or AG150 / PAC-SC51KUA or GB50 / PAC-SC50KUA
Page 235
G50/AG150/GB50 Programmable Logic Controller /
TG2000 Software
TG2000 PC Based software that works in conjunction with G50/GB50 Controller
TG2000 Software with Energy Monitoring
PC Based Software Package
The TG2000 centralised PC based graphical software package allows the operator to control and monitor up to a
maximum of 2000 indoor units. This software has been designed to connect directly to an air conditioning system via
G50/GB50 controller, allowing the operator all the required functionality to control and monitor the complete air
conditioning system from a central location. In addition to providing a centralised control facility, the TG2000 allows
complete energy consumption data to be logged with user definable billing groups and electrical tariffs for billing purposes.
M-NET
*NOTE 1
ETHERNET
PAC-YG60MCA
PAC-SC50KUA
METER 1
METER 2
METER 3
METER 4
Technical Information
TG2000 Software with Energy Monitoring
FUNCTION
DESCRIPTION
OPERATING PLATFORM
Pentium III, CPU 1000 Mhz, 256 MB RAM, 6GB or more. Internal LAN 10/100 MBps running Windows
Professional 2000 service pack 4or Windows Professional XP service pack 2 or Windows Vista
MAX No. OF INDOOR UNITS
2000 Indoor units, 50 indoor units per G50/AG150/GB50
OPERATIONAL SECTIONS
The software package is split into two distinctive areas, System and Controls setting. System Setting: Password
protected, System Configuration and group/block organisation, printer setting. Controls Setting: Normal Operation,
monitoring and control functions as described below. The software allows individual indoor units to be allocated
to logical groups, represented within user definable graphics screens, allocated during the system configuration
ON/OFF
Indicates the On/Off status of each group within the selected graphical screen or entire building
OPERATION MODE
Indicates the operational mode (Cool, Heat, Fan, Dry, Auto) for each group on the selected graphical screen
SET TEMPERATURE
Displays the set temperature for each group on the selected graphical screen.
Also able to limit the set point range in both heating and cooling mode
AIR SPEED
Displays the current fan speed setting for each group on the selected graphical screen
REMOTE CONTROLLER
PROHIBIT/PERMIT
Displays the current prohibit/permit status for each groups remote controller on the selected graphical screen
ABNORMALITY (FAULT) MONITORING
Individual indoor unit fault monitoring is recorded within the fault log for both viewing and printing.
Fault monitoring can also be viewed via the fault log for all units associated with a particular graphical screen
or the entire building. Faults can also be tracked and printed using date of failure, date of recovery and error code
ROOM TEMPERATURE MONITORING
Displays the return air temperature of the master indoor unit within a group
SCHEDULED ON/OFF
On/Off schedules can be set for each group, each graphical screen or the entire building
ENERGY CHARGING
Able to create or email bills for individual indoor units, groups of indoor units or a complete system (Optional) via the PAC-YG60MCA
WEB REFRIGERANT STATUS CHECK
Activate refrigerant volume checking function on Modular City Multi systems
ENERGY CHARGING
Able to create bills for individual indoor units, groups of indoor units or a complete system (Optional)
via the PAC-YG60MCA
ENERGY SAVE CONTROL
Individual indoor unit, group of indoor units or a complete system can be controlled.
There are various energy saving options available (Optional)
LOAD SHEDDING
Activate energy saving mode when energy consumption is too high
TREND LOGGING
Able to log: Return air temperature, setpoint, mode, On/Off, power consumption by group or by indoor unit,
watt-hour meter and then email to customer
GRAPHICAL SCREENS
The complete system configurations can be allocated between multiple screens. Each screen can display
a bitmap image representing the area of the building or floor where the units or groups are physically located
EMAIL
The following information may be sent regularly and automatically via email: energy monitoring data,
energy saving data, trend logging data (temperatures etc) and fault code history
*NOTE 1: Applicable with G50 / PAC-SC50KUA or AG150 / PAC-SC51KUA or GB50 / PAC-SC50KUA
NOTE 2: Energy Meters not supplied by MEUK
Page 236
PC Based Software Package
The TG2000 centralised PC based graphical software package allows the operator to control and monitor up
to a maximum of 2000 indoor units. This software has been designed to connect directly to an air conditioning
system via G50/GB50 controller, allowing the operator all the required functionality to control and monitor the
complete air conditioning system from a central location. In addition to providing a centralised control facility,
the TG2000 allows you to monitor and control third party equipment.
M-NET
*NOTE 1
ETHERNET
PAC-SC50KUA
PAC-YG66DCA
EQUIPMENT 1
PAC-YG63MCA
EQUIPMENT 2
SENSOR 1
Controls Range 2008
TG2000 Software
with Third Party Equipment
SENSOR 2
Technical Information
DESCRIPTION
OPERATING PLATFORM
Pentium III, CPU 1000 Mhz, 256 MB RAM, 6GB or more. Internal LAN 10/100 MBps running
Windows Professional 2000 service pack 4or Windows Professional XP service pack 2 or Windows Vista
MAX No. OF INDOOR UNITS
2000 Indoor units, 50 indoor units per G50/AG150/GB50
OPERATIONAL SECTIONS
The software package is split into two distinctive areas, System and Controls setting. System Setting: Password
protected, System Configuration and group/block organisation, printer setting. Controls Setting: Normal Operation,
monitoring and control functions as described below. The software allows individual indoor units to be allocated
to logical groups, represented within user definable graphics screens, allocated during the system configuration
ON/OFF
Indicates the On/Off status of each group within the selected graphical screen or entire building
OPERATION MODE
Indicates the operational mode (Cool, Heat, Fan, Dry, Auto) for each group on the selected graphical screen
SET TEMPERATURE
Displays the set temperature for each group on the selected graphical screen.
Also able to limit the set point range in both heating and cooling mode
AIR SPEED
Displays the current fan speed setting for each group on the selected graphical screen
REMOTE CONTROLLER
PROHIBIT/PERMIT
Displays the current prohibit/permit status for each groups remote controller on the selected graphical screen
ABNORMALITY (FAULT) MONITORING
Individual indoor unit fault monitoring is recorded within the fault log for both viewing and printing.
Fault monitoring can also be viewed via the fault log for all units associated with a particular graphical screen
or the entire building. Faults can also be tracked and printed using date of failure, date of recovery and error code
ROOM TEMPERATURE MONITORING
Displays the return air temperature of the master indoor unit within a group
SCHEDULED ON/OFF
On/Off schedules can be set for each group, each graphical screen or the entire building
ENERGY SAVE CONTROL
Individual indoor unit, group of indoor units or a complete system can be controlled.
There are various energy saving options available (Optional)
TREND LOGGING
Able to log: Return air temperature, setpoint, mode, On/Off, power consumption by group or by indoor unit,
watt-hour meter and then email to customer
GRAPHICAL SCREENS
The complete system configurations can be allocated between multiple screens. Each screen can display a
bitmap image representing the area of the building or floor where the units or groups are physically located
THIRD PARTY EQUIPMENT MONITOR
Monitor general equipment Run and Faults via the PAC-YG66DCA interface and Temperature and Humidity via the PAC-YG63MCA
THIRD PARTY EQUIPMENT CONTROL
Control general equipment On/Off via the PAC-YG66DCA
EMAIL
The following information may be sent regularly and automatically via email: energy monitoring data,
energy saving data, trend logging data (temperatures etc) and fault code history
*NOTE 1: Applicable with G50 / PAC-SC50KUA or AG150 / PAC-SC51KUA or GB50 / PAC-SC50KUA
NOTE 2: Temperature and Humidity Sensors not supplied by MEUK
Page 237
TG2000 Software with Energy Monitoring /
TG2000 Software with Third Party Equipment
TG2000 Software with Third Party Equipment
FUNCTION
TG2000 WAN
(Wide Area Network)
Software
PC Based Software Package used to monitor and control multiple sites
The TG2000 WAN centralised PC based graphical software package allows the operator to control and monitor up
to a maximum of 1000 sites. Utilising the companies Wide Area Network, the complete (geographically distributed)
air conditioning asset base can be controlled and monitored from a centralised location.
PAC-YG66DCA
WAN
PAC-YG63MCA
SITE 1
(i.e. MANCHESTER)
*NOTE 1
EQUIPMENT 1
EQUIPMENT 2
SENSOR 1
PAC-YG66DCA
SENSOR 2
PAC-YG63MCA
SITE 999
(i.e. BIRMINGHAM)
*NOTE 1
EQUIPMENT 1
EQUIPMENT 2
SENSOR 1
SENSOR 2
Technical Information
TG2000WAN (Wide Area Network) Software
FUNCTION
DESCRIPTION
OPERATING PLATFORM
Pentium III, CPU 1000 Mhz, 256 MB RAM, 6GB or more. Internal LAN 10/100 MBps running Windows Professional
2000 service pack 4 or Windows Professional XP service pack 2 or Windows Vista
MAX No. OF SITES
1000
MAX No. OF INDOOR UNITS PER SITE
2000 Indoor units, 50 indoor units per G50/AG150/GB50 (per site)
OPERATIONAL SECTIONS
The software package is split into two distinctive areas, System and Controls setting. System Setting: Password
protected, System Configuration and group/block organisation, printer setting. Controls Setting: Normal Operation,
monitoring and control functions as described below. The software allows individual indoor units to be allocated
to logical groups, represented within user definable graphics screens, allocated during the system configuration
ON/OFF
Indicates the On/Off status of each group within the selected graphical screen or entire building
OPERATION MODE
Indicates the operational mode (Cool, Heat, Fan, Dry, Auto) for each group on the selected graphical screen
SET TEMPERATURE
Displays the set temperature for each group on the selected graphical screen.
Also able to limit the set point range in both heating and cooling mode
AIR SPEED
Displays the current fan speed setting for each group on the selected graphical screen
REMOTE CONTROLLER
PROHIBIT/PERMIT
Displays the current prohibit/permit status for each groups remote controller on the selected graphical screen
ABNORMALITY (FAULT) MONITORING
Individual indoor unit fault monitoring is recorded within the fault log for both viewing and printing.
Fault monitoring can also be viewed via the fault log for all units associated with a particular graphical screen or
the entire building. Faults can also be tracked and printed using date of failure, date of recovery and error code
ROOM TEMPERATURE MONITORING
Displays the return air temperature of the master indoor unit within a group
SCHEDULED ON/OFF
On/Off schedules can be set for each group, each graphical screen or the entire building
GRAPHICAL SCREENS
The complete system configurations can be allocated between multiple screens. Each screen can display a
bitmap image representing the area of the building or floor where the units or groups are physically located
THIRD PARTY EQUIPMENT MONITORING
Monitor general equipment Run and Faults via the PAC-YG66DCA interface and Temperature and Humidity via the PAC-YG63MCA
THIRD PARTY EQUIPMENT CONTROL
Control general equipment On/Off via the PAC-YG66DCA
EMAIL
The following information may be sent regularly and automatically via email: energy monitoring data,
energy saving data, trend logging data (temperatures etc) and fault code history
*NOTE 1: Applicable with G50 / PAC-SC50KUA or AG150 / PAC-SC51KUA or GB50 / PAC-SC50KUA
NOTE 2: The TG2000 WAN cannot be utilised if the following site functions are required: energy charging, energy saving and trend logging.
NOTE 3: Temperature and Humidity Sensors not supplied by MEUK
Page 238
Display Whole
Display Block
The 2000 indoor units status may be shown
on one screen.
Block may be set for each area. Settings may be
changed by one click of the mouse for each area.
Display Floor
Remote Controller Settings
AutoCAD drawing may be imported to
TG2000 to display floor screens.
Click on any icons in the floor view to access the remote
controller settings. Buttons on the local controllers may
be locked (On/Off, Mode, Setpoint, Filter reset).
Daily, Weekly and Annual Scheduling (AS PIN code)
Monitor Fault Codes
Scheduling may be set from the TG2000. A night set
back operation is available (HEAT, 12ºC). Optional
on the G50, standard with the GB50.
Faults with the unit address can be displayed under
fault conditions.
Energy Monitoring (EC PIN code)
Energy Saving (ES PIN code)
TG2000 in conjunction with energy meters can monitor
the energy consumption for each outdoor unit, indoor unit
or area. The indoor unit run hours can also be displayed.
TG2000 offers different energy saving options
including load shedding.
New icons now available to suit model type installed
Page 239
Controls Range 2008
Screenshots
TG2000 WAN / TG2000 Screenshots
TG2000
BEMS BACnet Interface
®
Procon BAC-IP/50
TM
To further enhance our complete open system network offering, we offer a BACnet gateway solution. Utilising
the ASHRAE BACnet standard, complete control and monitoring integration can be achieved with up to 50
air conditioning units.
®
®
M-NET
*NOTE 1
ETHERNET
PAC-SC50KUA
BAC-IP/50
Technical Information
BACnet INTERFACE
®
FUNCTION
BAC-IP/50
MAX No. OF
INDOOR UNITS
50
COMPATIBILITY
City Multi
Mr Slim via PAC-SF80MA
M Series via MAC-399IF
DIMENSIONS - mm
(WxDxH)
144x34x104
COMPATIBLE WITH
Andover Controls
York BMS
Siemens
Priva Building Intelligence
Delta Controls
BACnet INTERFACE
®
FUNCTION
NETWORK VARIABLE
NOTES
Control
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Setpoint Adjustment
Cooling 19-30ºC, Heating 17-28ºC, Auto 19-28ºC
Fan Speed Control
Lo-Mi1-Mi2-Hi
Permit / Prohibit
On/Off, Mode, Setpoint
Airflow Direction
Horizontal - 60,80,100º swing
Filter Sign
Normal/Reset
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Setpoint Adjustment
Cooling 19-30ºC, Heating 17-28ºC, Auto 19-28ºC
Fan Speed Control
Lo-Mi1-Mi2-Hi
Permit / Prohibit
On/Off, Mode, Setpoint
Airflow Direction
Horizontal - 60,80,100º swing
Fault Code
4 Character code - Indicates all unit alarms
Filter Sign
-
Room Temperature
-
Monitor
*NOTE 1: Applicable with G50 / PAC-SC50KUA or AG150 / PAC-SC51KUA or GB50 / PAC-SC50KUA
Page 240
Controls Range 2008
BEMS BACnet Mr Slim Interface
®
Procon BAC-A/50
TM
®
A new BACnet Interface has been specially developed for the Mr Slim systems. The BAC-A/50 can
control up to 50 individual systems.
PAC-SK81SI
BAC-A/50
Technical Information
BACnet MR SLIM INTERFACE
®
FUNCTION
BAC-A/50
MAX No. OF
50
OUTDOOR UNITS
COMPATIBLE WITH
Andover Controls
York BMS
COMPATIBILITY
Mr Slim via PAC-SK81SI
Siemens
Priva Building Intelligence
DIMENSIONS - mm
(WxDxH)
270x75x210
Delta Controls
BACnet MR SLIM INTERFACE
FUNCTION
NETWORK VARIABLE
NOTES
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Setpoint Adjustment
Cooling 19-30ºC, Heating 17-28ºC, Auto 19-28ºC
Fan Speed Control
Lo-Mi1-Mi2-Hi
Permit / Prohibit
On/Off, Mode, Setpoint
Airflow Direction
Horizontal - 60,80,100º swing
Filter Sign
Normal/Reset
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Setpoint Adjustment
Cooling 19-30ºC, Heating 17-28ºC, Auto 19-28ºC
Fan Speed Control
Lo-Mi1-Mi2-Hi
Permit / Prohibit
On/Off, Mode, Setpoint
Airflow Direction
Horizontal - 60,80,100º swing
Fault Code
4 Character code - Indicates all unit alarms
Filter Sign
-
Room Temperature
-
BEMS BACnet® Interface /
BEMS BACnet® Mr Slim Interface
®
Control
Monitor
Page 241
BEMS LonWorks Interface
®
LMAP
The Mitsubishi Electric LMAP continues to strengthen the ability of our products to interface with other third party
building control systems using the globally recognised and accepted open network protocol Echelon LonWorks .
LonWorks was introduced into the building services industry a number of years ago with the aim of establishing
itself as the defacto communications standard. Many hundreds of products now exist that utilise the LonWorks
protocol from complete systems like BEMS, lighting, power monitoring and security down to simple sensors
and relay switches.
®
®
®
®
To ensure that our products can connect directly and easily with other LonWorks products, the L-MAP02
was designed utilising Echelon MIPS technology and was the first to provide data in the LonWorks
SNVT (Standard Network Variable Type) format.
®
M-NET
LMAP
Technical Information
®
LMAP LonWorks INTERFACE
FUNCTION
LMAP
MAX No. OF
INDOOR UNITS
50
(G50/AG150/GB50 optional)
COMPATIBILITY
City Multi
Mr Slim via PAC-SF80MA
M Series via MAC-399IF
DIMENSIONS - mm
(WxDxH)
COMPATIBLE WITH
Honeywell
Johnson Controls
Realtime Control Systems
(LTX51/LTX21 via VCI)
Smart Controls
340x60x360
®
LMAP LonWorks INTERFACE
FUNCTION
NETWORK VARIABLE
NOTES
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Setpoint Adjustment
Cooling 19-30ºC, Heating 17-28ºC, Auto 19-28ºC
Fan Speed Control
Lo-Mi1-Mi2-Hi
Permit / Prohibit
On/Off, Mode, Setpoint (only available when using PAC-YT51CRA or PAR-21MAA)
Filter Sign
Normal/Reset
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Setpoint Adjustment
Cooling 19-30ºC, Heating 17-28ºC, Auto 19-28ºC
Fan Speed Control
Lo-Mi1-Mi2-Hi
Permit / Prohibit
On/Off, Mode, Setpoint (only available when using PAC-YT51CRA or PAR-21MAA)
Fault Code
4 Character code - Indicates all unit alarms
Filter Sign
-
Room Temperature
-
Control
Monitor
Page 242
Procon IP-32M / IP-50M / IP-100M
TM
To further compliment the existing control and interface product ranges being offered by Mitsubishi Electric
to support their air conditioning systems, the Modbus range has been developed to accommodate the typical
end-user needs as experienced within the UK market.
M-NET
*NOTE 1
ETHERNET
PAC-SC50KUA
Controls Range 2008
BEMS Modbus Interfaces
Modbus
IP-32M
IP-50M
IP-100M
Technical Information
MODBUS INTERFACES
FUNCTION
IP-32M
IP-50M
IP-100M
MAX No. OF
INDOOR UNITS
32
50
100
COMPATIBILITY
City Multi
Mr Slim via PAC-SF80MA
M Series via MAC-399IF
City Multi
Mr Slim via PAC-SF80MA
M Series via MAC-399IF
City Multi
Mr Slim via PAC-SF80MA
M Series via MAC-399IF
DIMENSIONS - mm
(WxDxH)
270x75x210
270x75x210
270x75x210
COMPATIBLE WITH
Trend via Synapsys SXNC200
Cylon
Satchwell
Crestron (Home automation)
Invensys
Interactive Homes
North BT
Andover
Siemens
FUNCTION
NETWORK VARIABLE
MODBUS
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
BEMS LonWorks® Interface /
BEMS Modbus Interfaces
MODBUS INTERFACE UNITS - OPERATIONAL INFORMATION
Control
Setpoint Adjustment
Cooling 19-30˚C
Heating 17-28˚C
Auto 19-28˚C
Fan Speed Control
Lo-Mi1-Mi2-Hi
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Monitor
Setpoint Adjustment
Cooling 19-30˚C
Heating 17-28˚C
Auto 19-28˚C
Fan Speed Control
Lo-Mi1-Mi2-Hi
Fault Code
4 Character code – Indicates all unit alarms
Room Temperature
-
*NOTE 1: Applicable with G50 / PAC-SC50KUA or AG150 / PAC-SC51KUA or GB50 / PAC-SC50KUA
Page 243
BEMS Modbus Mr Slim Interface
Procon A32M
TM
To further compliment the existing control and interface product ranges being offered by Mitsubishi Electric
to support their air conditioning systems, the Modbus range has been developed to accommodate the typical
end-user needs as experienced within the UK market.
PAC-SK81SI
Modbus
A32M
Technical Information
MODBUS MR SLIM INTERFACE
FUNCTION
A32M
MAX No. OF
32
OUTDOOR UNITS
COMPATIBILITY
Mr Slim via PAC-SK81SI
DIMENSIONS - mm
(WxDxH)
270x75x210
COMPATIBLE WITH
Trend via Synapsys SXNC200
Cylon
Satchwell
Crestron (Home automation)
Invensys
Interactive Homes
North BT
Andover
Siemens
MODBUS MR SLIM INTERFACE - OPERATIONAL INFORMATION
FUNCTION
NETWORK VARIABLE
MODBUS
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Control
Setpoint Adjustment
Cooling 19-30˚C
Heating 17-28˚C
Auto 19-28˚C
Fan Speed Control
Lo-Mi1-Mi2-Hi
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Monitor
Setpoint Adjustment
Cooling 19-30˚C
Heating 17-28˚C
Auto 19-28˚C
Fan Speed Control
Lo-Mi1-Mi2-Hi
Fault Code
4 Character code – Indicates all unit alarms
Room Temperature
-
NOTE: Not available on SEZ / SLZ
Page 244
Procon A1M
TM
To further compliment the existing control and interface product ranges being offered by Mitsubishi Electric
to support their air conditioning systems, the Modbus range has been developed to accommodate the typical
end-user needs as experienced within the UK market.
A1M
Modbus
Controls Range 2008
BEMS Modbus Splits Interface
Technical Information
MODBUS SPLITS INTERFACE
A1M
1
COMPATIBILITY
M Series
Mr Slim
DIMENSIONS - mm
(WxDxH)
72x27x50
COMPATIBLE WITH
Trend via Synapsys SXNC200
Cylon
Satchwell
Crestron (Home automation)
Invensys
Interactive Homes
North BT
Andover
Siemens
BEMS Modbus Mr Slim Interface /
BEMS Modbus Splits Interface
FUNCTION
MAX No. OF
INDOOR UNITS
MODBUS SPLITS INTERFACE - OPERATIONAL INFORMATION
FUNCTION
NETWORK VARIABLE
MODBUS
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Control
Setpoint Adjustment
Cooling 19-30˚C
Heating 17-28˚C
Auto 19-28˚C
Fan Speed Control
Lo-Mi1-Mi2-Hi
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Monitor
Setpoint Adjustment
Cooling 19-30˚C
Heating 17-28˚C
Auto 19-28˚C
Fan Speed Control
Lo-Mi1-Mi2-Hi
Fault Code
4 Character code – Indicates all unit alarms
Room Temperature
-
Page 245
BEMS KNX-EIB Interfaces
Procon KNX-EIB-IP-15/100
TM
To further compliment the existing control and interface product ranges being offered by Mitsubishi Electric
to support their air conditioning systems, the KNX-EIB range has been developed to accommodate the typical
end-user needs as experienced within the UK market.
M-NET
*NOTE 1
ETHERNET
PAC-SC50KUA
KNX-EIB
KNX-EIB-IP-15
KNX-EIB-IP-100
Technical Information
KNX-EIB CITY MULTI INTERFACES
KNX-EIB-IP-15
KNX-EIB-IP-100
MAX No. OF
INDOOR UNITS
FUNCTION
15
100
COMPATIBILITY
City Multi
Mr Slim via PAC-SF80MA
M Series via MAC-399IF
City Multi
Mr Slim via PAC-SF80MA
M Series via MAC-399IF
DIMENSIONS - mm
(WxDxH)
107x58x105
107x58x105
COMPATIBLE WITH
ABB
Intelligent Buildings
Nova Controls Ltd
Siemens
KNX-EIB CITY MULTI INTERFACE UNITS - OPERATIONAL INFORMATION
FUNCTION
NETWORK VARIABLE
MODBUS
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Control
Setpoint Adjustment
Cooling 19-30˚C
Heating 17-28˚C
Auto 19-28˚C
Fan Speed Control
Lo-Mi1-Mi2-Hi
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Monitor
Setpoint Adjustment
Cooling 19-30˚C
Heating 17-28˚C
Auto 19-28˚C
Fan Speed Control
Lo-Mi1-Mi2-Hi
Fault Code
4 Character code – Indicates all unit alarms
Room Temperature
-
*NOTE 1: Applicable with G50 / PAC-SC50KUA or AG150 / PAC-SC51KUA or GB50 / PAC-SC50KUA
Page 246
Procon KNX-EIB-A-1
TM
To further compliment the existing control and interface product ranges being offered by Mitsubishi Electric
to support their air conditioning systems, the KNX-EIB range has been developed to accommodate the typical
end-user needs as experienced within the UK market.
KNX-EIB-A-1
KNX-EIB
Controls Range 2008
BEMS KNX-EIB Splits Interface
Technical Information
KNX-EIB SPLITS INTERFACE
FUNCTION
KNX-EIB-A-1
MAX No. OF
INDOOR UNITS
1
COMPATIBILITY
M Series
Mr Slim
DIMENSIONS - mm
(WxDxH)
60x25x48
COMPATIBLE WITH
ABB
Intelligent Buildings
Nova Controls Ltd
Siemens
FUNCTION
NETWORK VARIABLE
MODBUS
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
BEMS KNX-EIB Interfaces /
BEMS KNX-EIB Splits Interface
KNX-EIB SPLITS INTERFACE - OPERATIONAL INFORMATION
Control
Setpoint Adjustment
Cooling 19-30˚C
Heating 17-28˚C
Auto 19-28˚C
Fan Speed Control
Lo-Mi1-Mi2-Hi
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Monitor
Setpoint Adjustment
Cooling 19-30˚C
Heating 17-28˚C
Auto 19-28˚C
Fan Speed Control
Lo-Mi1-Mi2-Hi
Fault Code
4 Character code – Indicates all unit alarms
Room Temperature
-
Page 247
M2M - Machine 2 Machine Interface
Procon Maxi M2M-IP/50
TM
To offer remote management of its air conditioning units to companies with large numbers of dispersed offices,
Mitsubishi Electric has adopted the M2M platform. The machine-to-machine (M2M) technology platform allows
customers to integrate multiple sites into one network. The air conditioning units as well as third party equipment
will be wirelessly connected to the M2M server and use the GPRS network to communicate.
GB50
Maxi M2M-IP/50
MEUK
METER 1 METER 2
METER 3
METER 4
EQUIPMENT 1
EQUIPMENT 2
SENSOR 1
SENSOR 2
EQUIPMENT 1
EQUIPMENT 2
SENSOR 1
SENSOR 2
GPRS
M2M
SERVER
GB50
Maxi M2M-IP/50
METER 1 METER 2
METER 3
METER 4
Technical Information
M2M INTERFACE
FUNCTION
DESCRIPTION
MAX No. OF INPUTS
22 (4 to 20mA, 0 to 10VDC, 10kΩ resistor, digital)
MAX No. OF OUTPUTS
4 (volt free contact)
4 (pulse with modulation)
MAX No. OF INDOOR UNITS
50
COMPATIBILITY
City Multi, Mr Slim and M Series
DIMENSIONS - mm
(WxDxH)
300x70x350
M2M INTERFACE - OPERATIONAL INFORMATION
FUNCTION
UP TO 25 GROUPS
UP TO 50 GROUPS
NOTES
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Setpoint Adjustment
Cooling 19-30ºC, Heating 17-28ºC, Auto 19-28ºC
Fan Speed Control
Lo-Mi1-Mi2-Hi
Permit / Prohibit
On/Off, Mode, Setpoint
Airflow Direction
Horizontal - 60,80,100º swing
Filter Sign
Normal/Reset
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Setpoint Adjustment
Cooling 19-30ºC, Heating 17-28ºC, Auto 19-28ºC
Fan Speed Control
Lo-Mi1-Mi2-Hi
Permit / Prohibit
On/Off, Mode, Setpoint
Airflow Direction
Fault Code
Filter Sign
Room Temperature
NETWORK VARIABLE
Control
Monitor
M2M Software Options - Pin Code Activation
M2M - OS
M2M - ES
Page 248
Optimised Start for Air Conditioning
Energy Saving Capability
Horizontal - 60,80,100º swing
4 Character code - Indicates all unit alarms
-
-
DEMONSTRATION
Visit m2m.mitsubishielectric.co.uk/demo to use the live
demonstration space (login: demo / password: demo)
Procon Mini M2M-A/16
TM
To offer remote management of its air conditioning units to companies with large numbers of dispersed offices,
Mitsubishi Electric has adopted the M2M platform. The machine-to-machine (M2M) technology platform allows
customers to integrate multiple sites into one network.
The air conditioning units as well as third party equipment
will be wirelessly connected to the M2M server and
use the GPRS network to communicate.
Mini M2M-A/16
MEUK
M2M
SERVER
METER 1 METER 2
A1M
METER 3
METER 4
EQUIPMENT 1
A1M
EQUIPMENT 2
SENSOR 1
SENSOR 2
GPRS
Mini M2M-A/16
METER 1 METER 2
A1M
METER 3
METER 4
EQUIPMENT 1
Controls Range 2008
M2M - Machine 2 Machine
Splits Interface
A1M
EQUIPMENT 2
SENSOR 1
SENSOR 2
Technical Information
M2M SPLITS INTERFACE
FUNCTION
DESCRIPTION
MAX No. OF INPUTS
8 (4 to 20mA, 0 to 10VDC, 10kΩ resistor, digital)
MAX No. OF OUTPUTS
4 (pulse with modulation)
MAX No. OF INDOOR UNITS
16
COMPATIBILITY
Mr Slim and M Series via Procon A1M
255x60x180
(WxDxH)
M2M SPLITS INTERFACE - OPERATIONAL INFORMATION
FUNCTION
NETWORK VARIABLE
NOTES
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Control
Setpoint Adjustment
Cooling 19-30˚C
Heating 17-28˚C
Auto 19-28˚C
Fan Speed Control
Lo-Mi1-Mi2-Hi
Time Zone
Weekly scheduling available
On/Off
Run/Stop
Mode Operation
Cool / Dry / Heat / Auto / Fan
Monitor
Setpoint Adjustment
Cooling 19-30˚C
Heating 17-28˚C
Auto 19-28˚C
Fan Speed Control
Lo-Mi1-Mi2-Hi
Fault Code
4 Character code – Indicates all unit alarms
Room Temperature
-
Time Zone
Weekly scheduling available
M2M Software Options - Pin Code Activation
M2M - OS
M2M - ES
Optimised Start for Air Conditioning
Energy Saving Capability
DEMONSTRATION
Visit m2m.mitsubishielectric.co.uk/demo to use the live
demonstration space (login: demo / password: demo)
Page 249
M2M Interface / M2M Splits Interface
DIMENSIONS - mm
M2M-Machine 2 Machine
Web Screenshots
MEUK Website
Login
M2M is accessible using MEUK website.
A username and password is required to monitor
and control sites.
Monitor Active Alarms and Sites
Status
All sites are listed with active alarm sites.
A site can be selected to monitor each system.
Set Parameters
Reports
Indoor unit and third party equipment can be
controlled from the Website.
Reports can be generated for analysis.
Dashboard
Administration
G50/AG150/GB50 web pages are available for
the air conditioning units
Using the administration level, the phone numbers
and email of each duty engineer may be set
and activated.
Technical Information
Page 250
Mitsubishi Electric can supply G50 control panels (surface or internally mounted). This allows easy installation.
M-NET
G50 Control Panel
Controls Range 2008
G50 Control Panels
Technical Information
G50 CONTROL PANELS
No. OF G50
No. OF INDOOR UNITS
ROUTER
MOUNTED
DIMENSIONS (WxDxH)
GP50PS1
1
50
NO
Surface
600x200x600
GP50PS2
2
100
NO
Surface
600x200x600
GP50PS3
3
150
NO
Surface
800x250x600
GP50PS4
4
200
NO
Surface
800x250x600
GP50PI1
1
50
NO
Internally
600x200x600
GP50PI2
2
100
NO
Internally
600x200x600
GP50PI3
3
150
NO
Internally
800x250x600
GP50PI4
4
200
NO
Internally
800x250x600
GP50PSR1
1
50
YES
Surface
600x200x600
GP50PSR2
2
100
YES
Surface
600x200x600
GP50PSR3
3
150
YES
Surface
800x250x600
GP50PSR4
4
200
YES
Surface
800x250x600
GP50PIR1
1
50
YES
Internally
600x200x600
GP50PIR2
2
100
YES
Internally
600x200x600
GP50PIR3
3
150
YES
Internally
800x250x600
GP50PIR4
4
200
YES
Internally
800x250x600
M2M Web Screenshots / G50 Control Panels
MODEL
Page 251
Run / Standby Control Panels
The run/standby panel allows one system to run one week and the other one to run the other week.
If one system fails, the run/standby panel will start the other one. If the temperature is too high,
the panel will also start the 2 systems and enable an audible alarm.
Run / Standby
Control Panel
Technical Information
RUN / STANDBY CONTROL PANELS
MODEL
No. OF SYSTEMS
RUN
STANDBY
HIGH TEMP
ALARM
DIMENSIONS (WxDxH)
PANEL_RS1
2
1
1
YES
YES
400x210x600
PANEL_RS2
3
2
1
YES
YES
500x210x700
PANEL_RS3
4
3
1
YES
YES
500x210x700
Page 252
Energy monitoring is key to the compliance with Part L2. To perform energy monitoring; a lot of different
products are required. To optimise the time of installation, Mitsubishi Electric can now supply an energy
monitoring panel with energy meter, current transformers, breakers and the interface to the
Mitsubishi Electric communication network.
Energy Monitoring
Control Panel
M-NET
Power Supply
Controls Range 2008
Energy Monitoring Control Panels
Technical Information
FUNCTION
No. OF SYSTEMS
MAX RUNNING CURRENT (A)
DIMENSIONS (WxDxH)
PANEL_EM100A
1
100
600x210x800
PANEL_EM200A
2
200
600x210x800
Run/Standby Control Panels /
Energy Monitoring Control Panels
ENERGY MONITORING CONTROL PANELS
Page 253
Controls Range 2008
Split-System A2M Interfaces
The City Multi systems use advanced communication protocol called M-NET. The Split-Systems can be
interfaced to M-NET, allowing compatibility with the main centralised controller (G50, AG150, GB50, TG2000).
An A2M adapter would be required per outdoor unit for Mr Slim and per indoor unit for Mr Slim S Series
or M Series indoor units.
PAC-SF80MA
Technical Information
SPLIT-SYSTEM A2M INTERFACES
FUNCTION
PAC-SF80MA
MAC-399IF
COMPATIBILITY
Mr Slim Outdoor Unit
Mr Slim S Series / M Series Indoor Unit
CONNECTION TO
Outdoor Unit
Indoor Unit
MNET SETTINGS
Rotary Switches
Dip Switches
130x15x90
160x55x70
Split-System A2M Interfaces
DIMENSIONS - mm
Page 254
(WxDxH)
Download PDF