Project Type Catalog No. Eseta™ LED Wall Sconce ES Luminaire Data 12.1 in [307.44 mm] Weight 9.9 lbs [4.5 kg] 14.6 lbs [6.5kg] with EM, MS options 16.8 in [427.78 mm] 5.4 in [138.37 mm] Ordering Information Sample Catalog No. ES1 24H MV NW W BK 700 EM Product ES1 No. & Type of LEDs 24H 48H Voltage Color Temperature1 MV 120-277V WW 3000K HV 347-480V NW 4000K CW 5000K Distribution Finish2 Drive Current3 W Wide BK FT Forward Throw DB 350 530 Dark Bronze 700 GY Gray Black WH White Options 350mA PC 530mA MSL24 700mA MSL34 EM5 FSIR100 Photo Control Motion Sensor with Photo Control, L2 Lens Motion Sensor with Photo Control, L3 Lens Emergency Battery System Motion Sensor Configuration Tool Notes: 1 Consult factory for other color temperatures. 2 Consult factory for non-standard finish options. 3 Factory set drive current, non-field adjustable. 700mA is not available for 48H version. Refer to performance data on page 2. Consult factory for other drive current options. 4 Motion Sensor available with MV only. Motion Sensor default setting dims luminaire to 50% when no motion is detected for 5 minutes. Field adjustable settings available using FSIR100 option. Luminaire warranty is limited to 5 years with a Motion Sensor. 5 Emergency Battery System available with MV only. 3-year limited warranty on Emergency Battery System. © 2015 Leotek Electronics USA ES Spec Sheet_120215. Specifications subject to change without notice. Eseta™ LED Wall Sconce ES Luminaire Specifications Housing Electrical Die cast aluminum housing with back mounting plate and outdoor rated cable. Back mounting plate includes novel hanging features to allow one-person installation. Knockouts on the top and bottom of the housing allow conduit entry. Electrical components are accessed behind gasketed optical cover. Light Emitting Diodes Power supply features a minimum power factor of .90 and <20% Total Harmonic Distortion (THD). EMC meets or exceeds FCC CFR Part 15. Transient voltage complies with ANSI C62.41 Cat. A. Integral surge protector is tested per ANSI/ IEEE C62.45 procedures based on ANSI/IEEE C62.41.2 definitions for standard and optional waveforms for Location Category C High. Hi-‐flux/Hi-power white LEDs are tested in accordance with IES LM-‐80 testing procedures. Warm White (3000K), Neutral White (4000K) and Cool White (5000K) with minimum 70 CRI are standard. LEDs are 100% mercury and lead free. Optical Systems The OMNILens™ system creates a low brightness source to reduce glare with precise Wide or Forward Throw distributions. Lens cover is UV stabilized, vandal-resistant polycarbonate. Luminaire produces 0% total lumens above 90⁰ (BUG Rating, U=0). Finish Housing receives a fade and abrasion resistant, epoxy polyester powder coat. Listings/Ratings/Labels Luminaires are UL listed for use in wet locations and emergency lighting in the United States and Canada. Ambient operating temperature is -40°C to 40°C with no accessories installed. Optical systems maintain an IP66 rating. DesignLights Consortium™ 4000K qualified product. Assembled in the United States. Photometry Luminaires are photometrically tested by certified independent testing laboratories in accordance with IES LM-79 testing procedures. Lumen Maintenance TM-21 Lumen Maintenance (hours) at 25oC Models At 50,000 At 100,000 ES1-24H 99% 97% ES1-48H 97% 93% Warranty 10-year limited warranty is standard on luminaire and components. 5-year limited warranty on luminaires with a motion sensor or photo control option. 3-year limited warranty on Emergency Battery System. Performance Data All data nominal, consult factory for IES files or LM-79 reports. CCFT 3000K Two Distributions No. of LEDs & Type 24H 48H 4000K 24H 48H 5000K 24H 48H Wide Distribution Forward Throw Distribution Drive Current (mA) System Wattage (W) Delivered Lumens (Lm) Efficacy (Lm/W) System Wattage (W) Delivered Lumens (Lm) Efficacy (Lm/W) 350 30 3205 108 28 3146 112 530 45 4690 103 43 4604 108 700 56 5641 101 53 5537 104 530 83 8826 106 81 8751 108 350 29 3301 115 30 3471 117 530 44 4541 104 43 4548 105 700 59 5771 99 59 5738 98 530 82 8707 106 83 8466 102 350 29 3730 130 30 3922 132 530 44 5131 118 43 5139 119 700 58 6521 112 56 6260 112 530 82 9839 120 84 9585 115 © 2015 Leotek Electronics USA ES Spec Sheet_120215. Specifications subject to change without notice. Eseta™ LED Wall Sconce ES Motion Sensor (Optional) Data L2 Lens Coverage Top View 2.33 in [59.2 mm] L3 Lens Coverage Top View 30 20 20 10 10 0 40 ft 0 44 ft 10 10 20 20 30 10 20 0.78 in [19.7 mm] 0 10 20 20 10 0 10 20 0 8 L2 Lens Coverage Side View 22 11 7 3 0 3 7 11 0 L3 Lens Coverage Side View 22 0 5 8 22 11 7 3 0 3 7 11 22 10 15 20 20 18 15 Motion Sensor (Optional) Specifications Description Digital passive infrared luminaire integrated outdoor occupancy sensor provides high/low/ off control based on motion. Initial setup and subsequent sensor adjustments are made using a handheld configuration tool. Operation Standard factory setting will dim the luminaire to 50% until motion is sensed and then it will power to 100%. When motion is not detected for five minutes, the luminaire will dim back to 50%. Ramp up and fade down times are adjustable, but initially set to NONE. The percent dimming and time durations may be field adjusted as required using FSIR100 option. FSIR user guide available at: www.wattstopper.com. Optical System Multi-cell, multi-tier Fresnel lens with a 360 degree view detects unobstructed motion. L2 lens is designed for a mounting height up to 8 feet and detects motion up to 3 times mounting height. L3 lens is designed for a mounting height up to 20 feet and detects motion within one mounting height. 12 9 6 3 0 3 6 9 12 15 18 Finish Sensor exterior ring and lens are white polycarbonate, UV and impact resistant. Listings/Ratings Sensor is TUV, UL and cUL listed, IP66 rated and CE compliant. Warranty 5-year limited warranty on luminaires and components with a motion sensor. Emergency Battery System (Optional) Specifications Description Emergency battery system option provides a nominal 1900 lumens for a minimum of 90 minutes and can be specified with motion sensor option. Test switch and charging indicator light are visible and accessible on the optical cover. Listings/Ratings/Labels Emergency LED driver and batteries are UL recognized and CSA certified. Emergency illumination time exceeds the National Electrical Code (NEC), Life Safety Code (NFPALSC), National Building Code of Canada (NBC), National Fire Code of Canada (NFC) and UL 90-minute requirements. Temperature Rating Ambient operating temperature is -20C to +60C. © 2015 Leotek Electronics USA ES Spec Sheet_120215. Specifications subject to change without notice. 20 Warranty 3-year limited warranty on Emergency Battery System.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project