Activator Foam

Activator Foam
TRISTEL ACTIVATOR FOAM CLP COMPLIANCE FACTSHEET
Activator Foam
CLP Compliance Factsheet
The appearance of the Tristel Activator Foam label and
MSDS is changing to comply with the new Classification,
Labelling and Packaging (CLP) Regulation.
CLP is the European Interpretation of GHS (Global Harmonisation
System) for Classification, which is a UN initiative introduced in
1992. Its aim is to drive greater consistency in chemical labelling
across the world, with the goal of increasing user and
environmental safety associated with use of chemicals.
The CLP Regulation replaces the Dangerous Substances Directive
(DSD) and the Chemicals Hazard Information and Packaging for
Supply (CHIP) Regulation.
CLP becomes mandatory from 1 June 2015. This means that the
label and Material Safety Data Sheet of the Tristel Activator Foam
will change. All cartons containing the Tristel Activator Foam (Tristel
Sporicidal Wipes, Tristel Trio Wipes System and Tristel Trio Trace
Wipes) will carry a label to reflect the CLP information on the Tristel
Activator Foam label.
Already manufactured and labelled products will continue to be
supplied after 1 June 2015 until stocks last, resulting in a mix of
CHIP and CLP labels during a short period.
Please contact your local Tristel representative or Customer Services
to request CLP Material Safety Data Sheets.
For further detailed information regarding the CLP Regulation,
please visit www.echa.europa.eu.
Manufactured in Great Britain by:
Tristel Solutions Limited, Lynx Business Park,
Fordham Road, Snailwell, Cambridgeshire, CB8 7NY, UK
Call: +44 (0)1638 721500
Email: mail@tristel.com
Visit: www.tristel.com
Use biocides safely. Always read the label and product information before use.
TRISTEL ACTIVATOR FOAM CLP COMPLIANCE FACTSHEET
The Tristel Activator Foam is part of the Tristel Sporicidal Wipes,the Tristel Trio
Wipes System (TRIO50 and TRIO25) and the Tristel Trio Trace Wipes.
Activator Foam
label and MSDS
Recognisable
Tristel branding
1
Use to activate Tristel
Sporicidal Wipes. When
activated, the wipe contains
Chlorine dioxide (ClO2).
Refer to user guide
for full instructions.
Handling Tristel Wipes
Pre-clean surface to be
decontaminated. Use gloves.
Use wipe once only. For
re-usable medical devices
rinse thoroughly with water
of appropriate quality, or
use the Tristel Rinse Wipe.
2
Activator
Foam
How to use
1. Pump two measures
of Activator Foam onto the
Tristel Sporicidal Wipe.
2. Scrunch together for 15
seconds to activate. Ensure
that the wipe is evenly covered
with foam. Presence of
‘chlorine like’ odour confirms
that the wipe is ready to use.
3
Rinse
Contents
Activator Foam (100ml) contains a
dilute solution of sodium chlorite
combined with humectants and
foaming agents.
For batch number
and expiry date see
base of container.
Manufactured in Great Britain by
Tristel Solutions Limited
Lynx Business Park, Snailwell
Cambridgeshire, CB8 7NY, UK
T +44 (0)1638 721500
F +44 (0)1638 721911
E mail@tristel.com
W www.tristel.com
UK Patent Number 2 404 337 B
Warning
with acids
liberates very
toxic gas.
• Causes serious
eye irritation.
Precautions
• Wear protective gloves/protective
clothing/eye Protection.
• IF IN EYES: Rinse cautiously with
water for several minutes. Remove
contact lenses, if present and
easy to do so. Continue rinsing.
• If eye irritation persists:
Get medical advice.
New CLP ‘hazards
identification’ section
• Contact
3. Wipe the surface until it
has been covered with Tristel.
All areas of the surface must
come into contact with the
wipe at least once. Once the
entire surface has been wiped
and covered with Tristel, wait
30 seconds. Dispose of wipe
to clinical waste.
TRL_245_Issue3_Trio_100mlAFL_ENG_V1.indd 1
TRL/245/3
Pre-Clean
11/05/2015 15:59
New CLP signal
word “Warning”
New CLP
precautionary
statements
New CLP hazard
pictogram
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising