TD-W8151N_V4_QIG - TP-Link

TD-W8151N_V4_QIG - TP-Link
Package Contents
Quick Installation Guide
TD-W8151N
Power Adapter
Ethernet Cable
ADSL Splitter
150Mbps Wireless N ADSL2+ Modem Router
CD Setup Wizard
1
Insert the TP-LINK Resource CD into the CD-ROM drive.
2
Select TD-W8151N and click Start Setup.
3
Follow the pop-up flash video to connect your devices, then
click
to continue.
4
Please check the LEDs (especially the ADSL LED). Then click
NEXT and follow the step-by-step instructions until you
complete the configuration.
Resource CD
(Only for Windows)
Phone Cable x 2
Please select the appropriate setup wizard.
CD Setup Wizard
( For Windows users only )
Quick Installation Guide
150Mbps Wireless N ADSL2+ Modem Router
For Windows users only
Please select your appropriate setup wizard.
CD Setup Wizard
For Windows users only
Web-based Quick Setup Wizard
For users unable to run the Resource CD
MODEL NO.
Web-based Quick Setup Wizard
TD-W8151N
QIG
For users unable to run the Resource CD
Necessary Information
MODEL NO.
For a smoother setup, we suggest you consult your ISP for the
following information first. The information will be necessary
during the configuration stage.
TD-W8151N
VPI/VCI:
Connection Type:
Encapsulation Type (Optional):
Web-based Quick Setup Wizard
1
For the advanced configurations, please refer to the User Guide on the Resource CD provided.
( For users unable to run the Resource CD )
Connect your devices step by step following the figure.
2
Press the ON/OFF button of your modem router and make
sure the LEDs (especially the ADSL LED) display as shown
below.
POWER: Solid light
Open your browser and type in http://192.168.1.1 in the
address field, then press Enter. Use the default username
admin and password admin to log into the Web-Management
page.
5
Choose Quick Start in the main menu and click RUN WIZARD.
WLAN: Solid light or flashing
Phone Cable
Wall Socket
Splitter
LINE
PHONE MODEM
ON/OFF Button
ADSL: Solid light LAN: Solid light or flashing if the
or flashing
corresponding port is connected
3
Computer
1
3
Phone Cable
2
Ethernet Cable
7106504721 REV3.0.0
4
Set your computer to Obtain an IP address / DNS server
address automatically. For details, please refer to T1 in
Troubleshooting.
Web-based Quick Setup Wizard
6
The Quick Start screen will appear as below, and then click
NEXT.
7
Select the correct time zone for the modem router, and
then click NEXT.
( For users unable to run the Resource CD )
8
9
Select the Connection Type given by your ISP and then
click NEXT. Here we use PPPoE/PPPoA as an example.
10
The WLAN function is enabled by default. It is strongly
recommended to change the SSID (Wireless Network
Name) and Pre-Shared Key for network security. Keep
other settings by default, and then click NEXT. (The
default Pre-Shared Key, the same as the PIN code, is
printed on the bottom label.)
11
Complete the configuration and click NEXT.
12
9
Quick Start has completed. Click CLOSE to make your
settings take effect.
Enter the Username and Password provided by your ISP
and then click NEXT.
Record your wireless information here:
SSID(Wireless Network Name):
Pre-Shared Key:
The basic settings for your modem router are
completed. Please open the web browser and try to
log on to http://www.tp-link.com to test your
Internet connection.
For the advanced configurations, please refer to the User Guide at http://www.tp-link.com.
Troubleshooting
T1. How can I set my computer to Obtain an IP
address / DNS server address automatically?
Technical Support
For Windows 8
1)
For Mac OS X
1) Click the Apple icon on the upper left corner of the screen.
2) Go to “System Preferences -> Network”.
3) Select Airport on the left menu bar, and then click Advanced for
wireless configuration; or select Ethernet for wired configuration.
4) In the Configure IPv4 box under TCP/IP, select Using DHCP.
5) Click Apply to save the settings.
For Windows 7
1)
2)
3)
4)
Click “Start -> Control Panel -> Network and Internet -> View
network status -> Change adapter settings”.
Right-click Wireless Network Connection (or Local Area
Connection), and then click Properties.
Select Internet Protocol Version 4 (TCP/IPv4), and then click
Properties.
Select Obtain an IP address automatically and Obtain DNS
server address automatically. Then click OK.
For Windows XP
1)
2)
3)
4)
Click “Start -> Control Panel -> Network and Internet
Connections -> Network Connections”.
Right-click Wireless Network Connection (or Local Area
Connection), and then click Properties.
Select Internet Protocol (TCP/IP), and then click Properties.
Select Obtain an IP address automatically and Obtain DNS
server address automatically. Then click OK.
2)
3)
4)
5)
Move your mouse to the lower right corner and click the Search icon
in the Popups.
Go to Apps, type Control Panel in the search box and press Enter.
Go to “Control Panel -> View network status and tasks > Change
adapter settings”.
Right-click Ethernet, select Properties. Then double-click Internet
Protocol Version 4 (TCP/IPv4).
Select Obtain an IP address automatically and Obtain DNS server
address automatically. Then click OK.
T3. How can I restore my modem router’s configuration
to its factory default settings?
Once the modem router is reset, the current settings will be lost and you will
need to reconfigure the modem router. We strongly suggest you back up
the current settings before resetting the modem router. For more Backup
information, please refer to 4.6.3 Firmware on User Guide.
With the modem router powered on, use a pin to press and hold the RESET
button on the rear panel for 8 to 10 seconds before releasing it.
T2. What can I do if I cannot access the Internet?
1)
Check your cables and make sure they are all plugged in correctly,
including the telephone line, Ethernet cables and power adapter.
2)
Check to see if you can log on to the Web-Management page of the
modem router. The default address of the Web-Management page is
http://192.168.1.1. If you can, try the following steps. (If you can
not, please refer to T1 to configure TCP/IP Properties and then try to
access the Internet again.)
3)
4)
5)
Consult your ISP and make sure all the VPI/VCI, Connection Type,
account username and password are correct. If they are not, please
replace them with the correct settings and try again.
If you still cannot access the Internet, please restore your modem
router to its factory default settings and reconfigure your modem
router following the instructions in this QIG.
Please contact our Technical Support if the problem still exists.
T4. What can I do if I forget my password?
Reset the modem router first and then use the default user name and
password: admin/admin.
For more details about Troubleshooting and
Technical Support contact information, please
log on to our Technical Support website:
http://www.tp-link.com/en/support
For more troubleshooting help, go to http://www.tp-link.com/en/support/faq
To download the latest Firmware, Driver, Utility and User Guide, go to
http://www.tp-link.com/en/support/download
For all other technical support, please contact us by using the following details:
Global
Tel: +86 755 2650 4400
Fee: Depending on rate of different carriers, IDD.
E-mail: support@tp-link.com
Service time: 24hrs, 7 days a week
Malaysia
Toll Free: 1300 88 875 465
E-mail: support.my@tp-link.com
Service time: 24hrs, 7days a week
UK
Tel: +44 (0) 845 147 0017
Fee: Landline: 1p-10.5p/min, depending on
the time of day. Mobile: 15p-40p/min,
depending on your mobile network.
E-mail: support.uk@tp-link.com
Service time: 24hrs, 7days a week
Turkey
Tel: 0850 72 444 88(Turkish Service)
Fee: Depending on rate of different carriers.
E-mail: support.tr@tp-link.com
Service time: 09:00 to 21:00 , 7days a week
Brazil
Toll Free: 0800 608 9799(Portuguese Service)
E-mail: suporte.br@tp-link.com
Service time: Monday to Friday,09:00 to 20:00;
Saturday, 09:00 to 15:00
Italy
Tel: +39 023 051 9020
Fee: Depending on rate of different carriers.
E-mail: support.it@tp-link.com
Service time: Monday to Friday, 09:00 to 13:00;
14:00 to 18:00
Indonesia
Tel: (+62 ) 021 6386 1936
Fee: Depending on rate of different carriers.
E-mail: support.id@tp-link.com
Service time: Sunday to Friday, 09:00 to12:00;
13:00 to18:00 *Except public holidays
Germany / Austria
Tel :+49 1805 875 465 (German Service)
+49 1805 TPLINK
+43 820 820 360
Fee: Landline from Germany: 0.14EUR/min.
Landline from Austria: 0.20EUR/min.
E-mail: support.de@tp-link.com
Service Time: Monday to Friday, 09:00 to 12:30 and
13:30 to 18:00. GMT+1 or GMT+2 ( DST in Germany)
* Except bank holidays in Hesse
Australia / New Zealand
Tel: NZ 0800 87 5465(Toll Free)
AU 1300 87 5465(Depending on 1300 policy.)
E-mail: support.au@tp-link.com (Australia)
support.nz@tp-link.com (New Zealand)
Service time: 24hrs, 7 days a week
Singapore
Tel: +65 6284 0493
Fee: Depending on rate of different carriers.
E-mail: support.sg@tp-link.com
Service time: 24hrs, 7 days a week
Ukraine
Tel: 0800 505 508
Fee: Free for Landline; Mobile: Depending on rate
of different carriers.
E-mail: support.ua@tp-link.com
Service time: Monday to Friday, 10:00 to 22:00
USA / Canada
Toll Free: +1 866 225 8139
E-mail: support.usa@tp-link.com(USA)
support.ca@tp-link.com(Canada)
Service time: 24hrs, 7days a week
Poland
Tel: +48 (0) 801 080 618
+48 223 606 363 (if calls from mobile phone)
Fee: Depending on rate of different carriers.
E-mail: support.pl@tp-link.com
Service time: Monday to Friday, 09:00 to 17:00. GMT+1 or
GMT+2 (DST)
Switzerland
Tel: +41 (0)848 800 998 (German Service)
Fee: 4-8 Rp/min, depending on rate of different time.
E-mail: support.ch@tp-link.com
Service time: Monday to Friday, 09:00 to 12:30 and
13:30 to 18:00. GMT+ 1 or GMT+ 2 (DST)
France
Tel: 0820 800 860 (French service)
Fee: 0.118 EUR/min from France
Email: support.fr@tp-link.com
Service time: Monday to Friday, 09:00 to 18:00
*Except French Bank holidays
Russian Federation
Tel: 8 (499) 754 5560(Moscow NO.)
8 (800) 250 5560 (Toll-free within RF)
E-mail: support.ru@tp-link.com
Service time: From 9:00 to 21:00 (Moscow time)
*Except weekends and holidays in RF
TP-LINK TECHNOLOGIES CO., LTD.
www.tp-link.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising