Canon | Sure shot AF-7 | User guide | Canon Sure shot AF-7 User guide

Camera User Guide
C
Y
P
O
ENGLISH
• Make sure you read this guide before using the camera.
• Store this guide safely so that you can use it in the future.
Checking the Package Contents
Check if the following items are included in your camera package. If anything
is missing, contact the retailer from which you purchased the camera.
Camera
Interface Cable
IFC-400PCU
Getting Started
AA-size Alkaline
Batteries (x2)
Memory Card
AV Cable
AVC-DC300
Wrist Strap
WS-800
Y
P
O
DIGITAL CAMERA
Solution Disk
C
Warranty
Card
“Canon Customer
Support” Leaflet
Also refer to the PDF manuals on the CD-ROM.
After installation, shortcut icons appear on the desktop. If the software
installation fails, you can find the manuals in the Readme folder on the
CD-ROM.
• Camera User Guide (This Guide)
Once you have mastered the basics, use the camera’s many
features to shoot more challenging photos.
• Personal Printing Guide
Read when you want to connect the camera to a printer and print.
• Software Starter Guide
Read when you want to connect the camera to a computer.
Explains how to install and use the software on the DIGITAL
CAMERA Solution Disk.
Download ZoomBrowser EX/ImageBrowser Software Guide (PDF)
from:
http://web.canon.jp/imaging/information-e.htm
• You can use the included memory card to try out your new camera and
take some test shots.
• Adobe Reader is required to view the PDF manuals.
2
Read This First
Test Shots
Take some initial test shots and play them back to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be recorded
in a way that is machine readable.
Warning Against Copyright Infringement
The images recorded with this camera are intended for personal use. Do not
record images that infringe upon copyright laws without the prior permission
of the copyright holder. Please be advised that in certain cases the copying
of images from performances, exhibitions, or commercial properties by
means of a camera or other device may contravene copyright or other legal
rights even if the image was shot for personal use.
Warranty Limitations
Y
P
O
This camera’s warranty is only effective in the country of sale. If there is a
problem with the camera while abroad, please return it to the country of sale
before proceeding with a warranty claim to a Canon Customer Support Help
Desk. For Canon Customer Support contacts, please see the customer
support list supplied with your camera.
LCD Monitor
C
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification, but
occasionally non-performing pixels may appear as bright or dark dots. This
is not a malfunction and has no effect on the recorded image.
Camera Body Temperature
Please take care when operating the camera for an extended period as the
camera body may become warm. This is not a malfunction.
Memory Cards
The various types of memory cards that can be used in this camera are
collectively referred to as memory cards in this guide.
3
What Do You Want to Do?
4
Shoot
● Shoot, leaving it to the camera to make settings . . . . . . . . . . . . 20
● Shoot to match special conditions. . . . . . . . . . . . . . . . . . . . 50 – 52
Take good people shots
I
Portraits
(p. 50)
F
V
With nightscapes Kids and pets
(p. 50)
(p. 50)
Take good landscapes
U
Sunsets
(p. 51)
Indoors
(p. 51)
C
P
With snowscapes
(p. 52)
O
Y
P
O
Shoot various other scenes
’
w
At the beach
(p. 51)
Foliage
(p. 52)
t
Fireworks
(p. 51)
y
Aquarium
(p. 51)
● Focus on faces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 74
● Shoot in places where I cannot use the flash
(turn off the flash) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
● Shoot pictures with me in them too (self-timer). . . . . . . . . . . . . . 57
● Insert the date and time into my shots . . . . . . . . . . . . . . . . . . . . 56
● Take close-up pictures of subjects (macro shooting) . . . . . . . . . 61
● Shooting Close-ups (super macro shooting) . . . . . . . . . . . . . . . 62
● Take sepia toned or black and white pictures . . . . . . . . . . . . . . . 69
● Change the size of picture I want to take (recording pixels) . . . . 64
● Take pictures continuously . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
● Shoot without the effects of camera shake even in low light
conditions (High ISO Auto) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
4
What Do You Want to Do?
1
View
● Look at my pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
● Automatically play back pictures (slideshow) . . . . . . . . . . . . . . . 88
● Look at my pictures on a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
● Quickly search pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 87
● Erase pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 93
● Protect pictures from accidental erasure. . . . . . . . . . . . . . . . . . . 92
Shoot/View Movies
E
Y
P 2
● Shoot movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
● View movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Print
O
C
● Easily print pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Save
● Save images to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Other
3
● Turn off sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
● Use the camera abroad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
5
Table of Contents
Chapters 1 – 3 explain the basic operations and frequently used functions of
this camera. Chapters 4 onward explain the advanced functions, letting you
learn more as you read each chapter.
Checking the Package Contents .......2
Read This First ..................................3
What Do You Want to Do? ................4
Safety Precautions.............................8
Returning the Camera to Default
Settings ........................................... 46
Formatting Memory Cards .............. 47
Changing the Image Display Time .. 48
1 Getting Started ....................11
3 Shooting in Special
Conditions and Commonly
Used Functions................... 49
Inserting the Batteries and Memory
Card .................................................12
Setting the Date and Time ...............16
Setting the Display Language..........18
Pressing the Shutter Button.............19
» Taking Pictures...........................20
1 Viewing Images ..........................23
Erasing Images................................24
Printing Images................................25
X Shooting Movies .........................27
Viewing Movies................................29
Transferring Images to a
Computer .........................................30
Accessories .....................................34
Separately Sold Accessories ...........36
C
Y
P
O
2 Learning More......................37
Components Guide..........................38
Power Saving Function
(Auto Power Down)..........................39
Indicator ...........................................39
Information Displayed on the
Screen .............................................40
m FUNC. Menu – Basic
Operations .......................................43
n Menu – Basic Operations ....44
Changing the Sound Settings ..........45
6
K Shooting in Special
Conditions ....................................... 50
! Turning the Flash Off.................. 53
Zooming in More Closely on
Subjects (Digital Zoom)................... 54
‘ Inserting the Date and Time....... 56
Ò Using the Self-Timer................... 57
4 Selecting Settings
Yourself ............................... 59
G Shooting in Program AE ............. 60
h Turning the Flash On................... 61
e Shooting Close-ups (Macro) ....... 61
œ Shooting Close-ups
(Super Macro Shooting) .................. 62
u Shooting Far Away Subjects
(Infinity) ........................................... 63
Changing the Recording Pixels
(Image Size).................................... 64
Changing the Image Quality
(Compression Ratio) ....................... 64
Adjusting the Brightness
(Exposure Compensation) .............. 66
W Continuous Shooting ................. 66
- Changing the ISO Speed ......... 67
Adjusting the White Balance ........... 68
Table of Contents
Changing the Tone of an Image
(My Colors) ..................................... 69
Shooting Using a TV Monitor .......... 70
Î Shooting Using the Two
Second Self-Timer .......................... 70
$ Customizing the Self-Timer ........ 71
Changing the Composition with
the Focus Lock................................ 72
5 Getting More Out of Your
Camera ................................ 73
Changing the AF Frame Mode........ 74
% Shooting with the AF Lock ........ 75
Magnifying the Focal Point.............. 76
Changing the Metering Mode.......... 77
& Shooting with the AE Lock ........ 77
( Shooting with the FE Lock ........ 78
… Shooting with Slow Synchro ...... 78
ΠRed-Eye Correction ................... 79
≈ Shooting Long Exposures .......... 80
C
+ Changing Image Transitions....... 90
Viewing Images on a TV ................. 91
: Protecting Images..................... 92
/ Erasing All Images...................... 93
\ Rotating Images.......................... 93
= Resizing Images ......................... 94
] Correcting the Red-Eye Effect .... 95
Selecting Images for Printing
(DPOF) ............................................ 96
8 Customizing the Camera.... 99
Changing Functions ...................... 100
Changing Shooting Functions ....... 103
Changing Playback Functions....... 105
Y
P
O
6 Using Various
Functions for Shooting
Movies ................................. 81
Changing the Image Quality ........... 82
AE Lock/Exposure Shift .................. 83
Other Shooting Functions ............... 83
Playback Functions......................... 84
9 Useful Information ............ 107
Replacing the Date/Time
Battery ........................................... 108
Using Household Power................ 109
Handling Precautions .................... 110
Troubleshooting............................. 111
List of Messages that Appear
on the Screen ................................ 114
Functions Available in Each
Shooting Mode .............................. 116
Menus............................................ 118
Specifications ................................ 122
Index.............................................. 124
7 Using Playback and Other
Functions ............................ 85
g Searching Images by Sets of 9
(Index Display) ................................ 86
d Searching for Images Using
the Jump Display ............................ 87
. Viewing Slideshows .................... 88
Checking the Focus ........................ 89
k Magnifying Images ..................... 90
7
Safety Precautions
• Before using the camera, please ensure that you read the safety precautions
described below. Always ensure that the camera is operated correctly.
• The safety precautions noted on the following pages are intended to prevent injuries
to yourself and other persons, or damage to the equipment.
• Be sure to also check the guides included with any separately sold accessories you
use.
Warning Denotes the possibility of serious injury or death.
Caution
Denotes the possibility of injury.
Caution
Denotes the possibility of damage to the equipment.
Warning
Camera
Y
P
O
• Do not trigger the flash in close proximity to human eyes.
Exposure to the intense light produced by the flash could damage eyesight. In
particular, remain at least one meter (39 inches) away from infants when using the
flash.
C
• Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
Memory card, day/date battery: Dangerous if accidentally swallowed. If this occurs,
contact a doctor immediately.
• Do not attempt to disassemble or alter any part of the equipment that is not
expressly described in this guide.
• To avoid the risk of injury, do not touch the interior of the camera if it has been
dropped or otherwise damaged.
• Stop operating the camera immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
• Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
• Do not allow liquids or foreign objects to enter the camera.
This could result in fire or electrical shock.
If liquid or foreign objects come into contact with the camera interior, immediately turn
the camera power off and remove the batteries.
• Use only recommended power sources.
Using other power sources could result in fire or electrical shock.
8
Safety Precautions
Battery
• Use only recommended batteries.
• Do not place the batteries near or in direct flame.
• Do not let the batteries come into contact with water (e.g. sea water) or other liquids.
• Do not attempt to disassemble, alter or apply heat to the batteries.
• Avoid dropping or subjecting the batteries to severe impacts.
This may cause explosions or leaks, resulting in fire, injury and damage to the
surroundings. In the event that a battery leaks and the eyes, mouth, skin or clothing
contacts these substances, immediately flush with water and seek medical
assistance.
Other Warnings
• Do not play the supplied CD-ROM(s) in any CD player that does not support
data CD-ROMs.
Playing the CD-ROM(s) in an audio CD player (music player) could damage the
speakers. It is also possible to suffer hearing loss from listening with headphones to
the loud sounds of a CD-ROM played on a music CD player.
C
Y
P
O
Caution
• Be careful not to bang the camera or subject it to strong impacts or shocks
when hanging it by the strap.
• Be careful not to bump or push strongly on the lens.
This could damage the camera or lead to injury.
• Avoid using, placing or storing the camera in the following places.
- Places subject to strong sunlight.
- Places subject to temperatures above 40 °C (104 °F).
- Humid or dusty areas.
These could cause leakage, overheating or an explosion of the batteries, resulting in
electrical shock, fire, burns or other injuries. High temperatures may also cause
deformation of the casing.
Caution
• Do not aim the camera at bright light sources (the sun, etc.).
Doing so may cause malfunctions or damage the image sensor.
• When using the camera on a beach or at a windy location, be careful not to
allow dust or sand to enter the camera.
9
Safety Precautions
• Do not use the flash with dirt, dust or other items stuck to the surface, or if it is
covered by your fingers or clothing.
This may cause the camera to malfunction.
• Remove and store the batteries when you are not using the camera.
If the batteries are left inside the camera, damage caused by leakage may occur.
• Before you discard batteries, cover the terminals with tape or other insulators.
Contacting other metal materials in waste containers may lead to fire or explosions.
• Do not sit in a chair with the camera in your pocket.
Doing so may cause malfunctions or damage the LCD monitor.
• When putting the camera in your bag, ensure that hard objects do not come into
contact with the LCD monitor.
• Do not attach accessories to the strap.
Doing so may cause malfunctions or damage the LCD monitor.
C
10
Y
P
O
1
Getting Started
This chapter explains preparations before shooting, how to shoot in
» mode, and then how to view, erase and print the images you take.
Y
P
O
The latter part of this chapter explains how to shoot and view movies
and how to transfer images to a computer.
Attaching the Strap/Holding the Camera
C
• Attach the included strap and place it around your wrist to avoid dropping
the camera during use.
• Keep your arms tight against your body while holding the camera firmly by
the sides. Be sure that your fingers do not block the flash.
Strap
11
Inserting the Batteries and Memory Card
Insert the included batteries and memory card into the camera.
Check the card’s write-protect tab.
● If the memory card has a write-protect tab,
you will not be able to record images if the
tab is in the locked position. Slide the tab
up until you hear a click.
Open the cover.
● Slide the cover lock
open the cover
C
, then slide and
as shown.
Y
P
O
Insert the batteries.
● Insert the batteries with (+) and (-) ends
oriented correctly.
Insert the memory card.
● Insert the memory card as shown until it
locks into place with a click.
● Be sure the memory card is oriented
Label
12
correctly. Inserting the memory card in the
wrong direction could damage the
camera.
Inserting the Batteries and Memory Card
Close the cover.
● Close the cover
and press downward
as you slide it until it clicks into place
.
Y
P
O
Removing the Memory Card
● Push the memory card in until you hear a
click, then slowly release it.
C
X The memory card will pop up.
13
Inserting the Batteries and Memory Card
Approximate Number of Shots That Can Be Taken
Power Source
Alkaline Batteries
(Supplied)
NiMH Batteries
(Sold Separately)
200
8
470
10
Number of Shots*
Playback Time (Hours)
* The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
• Under some shooting conditions, fewer shots can be taken.
• Depending on the brand of alkaline batteries used, the number of shots that can be
taken may vary widely.
• The values for NiMH batteries are based on fully charged batteries.
Compatible Batteries
AA-size alkaline batteries and Canon AA-size NiMH batteries (sold
separately) (pp. 34, 36).
Y
P
O
Can any other batteries be used?
We cannot recommend the use of any other batteries than those listed above
because performance varies widely.
C
Why use NiMH batteries?
NiMH batteries last much longer than alkaline batteries, especially in cold
weather.
Battery Charge Indicator
When battery charge is low, an icon and message will appear. If the
batteries are charged, the icon and message will not display.
Display
Summary
Battery charge is low. Prepare new batteries to
continue using the camera.
“Change the batteries”
14
The batteries are depleted. Insert new batteries.
Inserting the Batteries and Memory Card
Approximate Number of Shots per Memory Card
Memory Card
Number of Shots
128 MB
47
2 GB
749
8 GB
2994
• Values are based on the default settings.
• The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.
Can you check the number of shots that can be taken?
You can check the number of shots that can be taken when the camera is in a
Shooting Mode (p. 20).
C
Y
P
O
Number of shots that can be taken
Compatible Memory Cards
•
•
•
•
•
SD memory cards
SDHC memory cards
MultiMediaCards
MMCplus memory cards
HC MMCplus memory cards
What is the write-protect tab?
SD and SDHC memory cards have a write-protect tab. If this tab is in the locked
position, [Card Locked!] will appear and you will not be able to take or erase
images.
15
Setting the Date and Time
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
● Press the power button.
X The Date/Time screen will appear.
Set the date and time.
● Press the qr buttons to select an option.
● Press the op buttons to set a value.
C
Y
P
O
Make the setting.
● Press the m button.
X Once the date and time have been set,
the Date/Time screen will close.
● Pressing the power button will turn off the
camera.
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the Date/
Time screen will appear each time you turn on the camera.
16
Setting the Date and Time
Changing the Date and Time
You can change the current date and time settings.
Display the menus.
● Press the n button.
Select [Date/Time] in the 3 tab.
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Date/
Time], then press the m button.
C
Y
P
O
Change the date and time.
● Follow Steps 2 and 3 on p. 16 to adjust
the setting.
● To close the menus, press the n
button.
Date/Time battery
If [Date/Time] appear even when the date/time have been correctly set, insert a
new date/time battery (p. 108).
17
Setting the Display Language
You can change the language displayed in the LCD monitor menus and
messages.
Set the playback mode.
● Press the 1 button.
Display the settings screen.
● Press and hold the m button
press the n button
, then
.
Y
P
O
Set the display language.
● Press the opqr buttons to select a
language, then press the m button.
X Once the display language has been set,
C
the language menu will close.
You can also change the display language by pressing the n button,
selecting the 3 tab, and selecting the [Language] menu item.
18
Pressing the Shutter Button
The shutter button has two stops. To take images that are in focus, be sure
to first press the shutter button lightly (halfway) to focus, then take the shot.
Press halfway (lightly to the first
stop).
X The camera automatically makes the
necessary settings for shooting, such as
focusing and setting the brightness.
X When the camera focuses, it will beep
twice.
Press fully (to the second stop).
Y
P
O
X The camera plays the shutter sound and
takes the shot.
If you just press the shutter button fully without pausing halfway, the
image may not be in focus.
C
19
» Taking Pictures
The camera can automatically select all settings so that you can take images
just by pressing the shutter button.
The camera can also detect and focus on faces, setting the color and
brightness to optimal levels.
Turn on the camera.
● Press the power button.
X The start-up sound will play, and the startup screen will appear.
● Pressing the power button again will turn
the camera off.
Select the » mode.
Y
P
O
● Press the æ button, then press the
qr buttons to select ».
● Press the m button.
X When faces are detected, a white frame
C
appears on the face the camera judges to
be the main subject, while gray frames
appear on other detected faces.
Compose the shot.
● Pressing the zoom button toward i will
zoom in on your subject, making it appear
larger. Pressing the zoom button toward
j will zoom out from your subject,
making it appear smaller.
20
» Taking Pictures
Focus.
● Press the shutter button halfway to focus.
X When the camera focuses, it will beep
twice.
X Green AF frames appear where the
subject is in focus.
X Several AF frames will appear when the
camera focuses on more than one point.
AF Frames
Y
P
O
Shoot.
● Press the shutter button fully.
X The camera will play the shutter sound
C
and shoot. The flash will automatically fire
in low light conditions.
X The indicator will blink green while the
image is recorded to the memory card.
X The image will appear for about two
seconds.
● You can take a second picture even while
an image is displayed by pressing the
shutter button.
21
» Taking Pictures
What if...
• The camera does not play any sounds?
Pressing the n button while turning on the camera power will turn off all
sounds except for warning sounds. To turn the sounds on, press the n
button, select the 3 tab, and then select [Mute]. Use the qr buttons to select
[Off].
• The image comes out dark even if the flash fired when shooting?
Your subject is too far away. When the camera is at maximum wide angle, move
about 30 cm – 3.0 m (12 in. – 9.8 ft.) away from your subject and shoot. Move
about 30 cm – 2.0 m (12 in. – 6.6 ft.) or more away when the camera is at
maximum telephoto.
• The camera beeps once when the shutter button is pressed halfway?
Your subject is too close. When the camera is at maximum wide angle, move
about 4 cm (1.6 in.) or more away from your subject and shoot. Move about
25 cm (9.8 in.) or more away when the camera is at maximum telephoto.
• The lamp lights when the shutter button is pressed halfway.
To reduce red-eye and to assist in focusing, the lamp may light when shooting in
dark areas.
C
22
Y
P
O
1 Viewing Images
You can view your images on the screen.
Select the playback mode.
● Press the 1 button.
X The last image you took will appear.
Select an image.
● Pressing the q button will cycle through the
images in reverse order.
● Pressing the r button will cycle through
the images in the order they were taken.
Y
P
O
● The images change more quickly if you
C
keep the qr buttons pressed, but they
will appear coarse.
● Pressing the 1 button while the lens is
extended will cause the shooting screen
to reappear.
● The lens will retract after approximately 1
minute elapses. If you press the 1 button
with the lens retracted, the power will turn
off.
Switching to and from playback mode
Pressing the 1 button while the camera is off turns the camera on in playback
mode. Pressing it again turns the camera off. Pressing the shutter button halfway
while in playback mode, or pressing the æ button will switch the camera to
shooting mode.
23
Erasing Images
You can select and erase images one at a time. Please note that erased
images cannot be recovered. Exercise adequate caution before erasing an
image.
Select the playback mode.
● Press the 1 button.
X The last image you took will appear.
Select an image to erase.
● Press the qr buttons to select an image.
C
Y
P
O
Erase the image.
● Press the p button.
X [Erase?] appears.
● Press the qr buttons to select [Erase],
then press the m button.
X The displayed image will be erased.
● To exit instead of erasing, press the qr
buttons to select [Cancel], then press the
m button.
24
Printing Images
You can easily print the images you have taken if you connect the camera to
a PictBridge compliant printer (sold separately).
Items to Prepare
• Camera and PictBridge compliant printer (sold separately)
• Interface cable supplied with the camera (p. 2)
Turn off the camera and printer.
Connect the camera to the printer.
● Open the cover, and insert the small end
of the plug firmly into the camera terminal
in the direction shown.
● Insert the cable’s larger plug into the
printer. For connection details, refer to the
user guide provided with the printer.
C
Y
P
O
Turn on the printer.
Turn on the camera.
● Press the 1 button to turn on the camera.
X
will appear.
25
Printing Images
Select an image to print.
● Press the qr buttons to select an image.
Print images.
● Press the m button.
● Press the op buttons to select [Print],
then press the m button.
X Printing will start.
● If you want to print additional images,
Y
P
O
repeat Steps 5 and 6 after printing has
completed.
● After printing has completed, turn off the
camera and printer, and unplug the
interface cable.
C
Refer to the Personal Printing Guide for details on the best ways to print.
Canon-Brand PictBridge Compliant Printers (Sold Separately)
By connecting your camera to one of the Canon-brand PictBridge compliant
printers below, you can print your images without having to use a computer.
Compact Photo Printers
(SELPHY series)
Inkjet Printers
(PIXMA series)
For more information, visit your nearest Canon retailer.
26
X Shooting Movies
The camera can automatically select all settings so that you can shoot
movies just by pressing the shutter button.
Select the X mode.
● Press the æ button and press the qr
buttons to select X.
● Press the m button.
Shooting Time
Y
P
O
Compose the shot.
C
● Pressing the zoom button toward i will
zoom in on your subject, making it appear
larger. Pressing the zoom button toward
j will zoom out from your subject,
making it appear smaller.
Focus.
● Press the shutter button halfway to focus.
X When the camera focuses, it will beep
twice.
27
X Shooting Movies
Shoot.
● Press the shutter button fully.
X The camera will start shooting the movie,
and [ Rec.] and the elapsed time will
appear.
● Once shooting begins, take your finger off
the shutter button.
● If you change the composition of your shot
during shooting, the focus will stay the
same, but the brightness and tone will
automatically adjust.
Elapsed Time
Y
P
O
● Do not touch the microphone while
shooting.
● Do not press any buttons other than the
Microphone
C
shutter button. Otherwise, the sound the
buttons make will be recorded in the
movie.
Stop shooting.
● Press the shutter button fully again.
X The camera will beep once and stop
shooting the movie.
X The indicator will blink green, and the
movie will record to the memory card.
X Shooting will automatically stop when the
memory card fills.
Estimated Shooting Times
Memory Card
Shooting Time
128 MB
1 min. 4 sec.
2 GB
16 min. 47 sec.
8 GB
1 hr. 7 min. 6 sec.
• Shooting times are based on default settings. Shooting time can be checked on
the screen in Step 1.
• Recording will automatically stop when either the clip file size reaches 4 GB or
the recording time reaches approximately 1 hour.
28
Viewing Movies
You can view your movies on the screen.
Select the playback mode.
● Press the 1 button.
X The last image you shot will appear.
X
appears on movies.
Select a movie.
● Press the qr buttons to select a movie to
play, then press the m button.
X The movie control panel will appear.
C
Y
P
O
Play the movie.
● Press the qr buttons to select
, then
press the m button.
X The movie will play.
● You can pause/resume the movie by
pressing the m button again.
● Press the op buttons to adjust the
volume.
● After the movie finishes,
appears.
29
Transferring Images to a Computer
You can use the included software to transfer your camera images to a
computer.
System Requirements
Even though these are recommended system requirements, not all
computer functions can be guaranteed.
Windows
OS
Windows Vista (including Service Pack 1)
Windows XP Service Pack 2, Service Pack 3
Computer model
The above OS should be pre-installed on computers with built-in
USB ports.
CPU
Pentium 1.3 GHz or higher
RAM
Windows Vista: 1 GB or more
Windows XP: 512 MB or more
Y
P
O
Interface
USB
Free Hard Disk
Space
Canon Utilities
• ZoomBrowser EX: 200 MB or more
• PhotoStitch: 40 MB or more
Display
1,024 x 768 pixels or higher
C
Macintosh
OS
Mac OS X (v10.4 – v10.5)
Computer model
The above OS should be pre-installed on computers with built-in
USB ports.
CPU
PowerPC G4/G5 or Intel Processor
RAM
512 MB or more
Interface
USB
Free Hard Disk
Space
Canon Utilities
• ImageBrowser: 300 MB or more
• PhotoStitch: 50 MB or more
Display
1,024 x 768 pixels or higher
30
Transferring Images to a Computer
Items to Prepare
• Camera and computer
• DIGITAL CAMERA Solution Disk supplied with the camera (p. 2)
• Interface cable supplied with the camera (p. 2)
Preparations
Windows XP and Mac OS X (v10.4) are used for these explanations.
Install the software.
Windows
Place the DIGITAL CAMERA Solution
Disk in the computer’s CD-ROM drive.
Y
P
O
Begin installation.
● Click [Easy Installation] and follow the
C
onscreen instructions to proceed with the
installation.
When the install finishes, click
[Restart] or [Finish].
Remove the CD-ROM.
● Remove the CD-ROM when your desktop
screen appears.
Macintosh
● Place the CD-ROM in the computer’s
CD-ROM drive and double-click the
icon.
X The screen on the left displays.
● Click [Install], and follow the onscreen
instructions to proceed with the
installation.
31
Transferring Images to a Computer
Connect the camera to the
computer.
● Turn off the camera.
● Open the cover, and insert the cable’s
small plug into the camera terminal in the
direction as shown.
● Insert the cable’s larger plug into the
computer’s USB port. For connection
details, refer to the user guide provided
with the computer.
Turn on the camera.
Y
P
O
● Press the 1 button to turn on the camera.
Open CameraWindow.
C
Windows
● Select [Canon CameraWindow] and click
[OK].
X CameraWindow will appear.
● If CameraWindow does not appear, click
the [Start] menu and select [All Programs]
or [Programs], followed by [Canon
Utilities]
[CameraWindow]
[CameraWindow]
[CameraWindow].
32
Transferring Images to a Computer
Macintosh
X CameraWindow will appear when a
connection between the camera and
computer is established.
● If CameraWindow does not appear, click
the [CameraWindow] icon on the Dock
(the bar which appears at the bottom of
the desktop).
Transfer Images
● Click [Transfer Untransferred Images].
X All images not previously transferred will
Y
P
O
transfer to the computer.
● After the transfer finishes, turn off the
camera and unplug the cable.
● For further operations, refer to the
C
Software Starter Guide.
Images transferred to the computer will be sorted by date and saved in
separate folders in the “My Pictures” folder for Windows or the “Picture”
folder for Macintosh.
33
Accessories
Supplied with Camera
AV Cable AVC-DC300*1
Interface Cable IFC-400PCU*1
Memory Card
Wrist Strap
WS-800
C
AA-size Alkaline Batteries
(x2)
Y
P
O
Battery and Charger Kit CBK4-300*3
Battery Charger CB-5AH
AA-size NiMH batteries
(NB-3AH x4)
DIGITAL CAMERA
Solution Disk
AC Adapter Kit ACK800
Compact Power Adapter CA-PS800
Power Cord
*1 Also available for purchase separately.
*2 See the user guide supplied with the printer for more information on the printer and
interface cables.
*3 Battery and Charger Kit CBK4-200 may also be used.
34
Accessories
Video IN Terminal
Audio IN Terminal
TV/Video
Compact Photo Printers
(SELPHY series)*2
Y
P
O
Card Reader
C
Inkjet Printers
(PIXMA series)*2
Windows/
Macintosh
High-Power Flash
HF-DC1
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon
accessories, although you may request such repairs on a chargeable basis.
35
Separately Sold Accessories
The following camera accessories are sold separately.
Some accessories are not sold in some regions, or may no longer be
available.
Power Supplies
• Battery and Charger Kit CBK4-300
This kit includes both a dedicated charger unit and four rechargeable AAsize NiMH (nickel metal hydride) batteries. Recommended for powering
the camera for an extended period of time.
• AC Adapter Kit ACK800
This kit lets you power the camera using household power.
Recommended for powering the camera for an extended period of time or
when connecting to a computer. Cannot be used to charge the batteries
inside the camera.
Y
P
O
The battery charger can also be used when abroad.
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use devices such as electrical transformers for foreign travel because they will
cause malfunctions.
C
Other Accessories
• High-Power Flash HF-DC1
This attachable supplementary flash can illuminate subjects that are too distant
for the light from the built-in flash to reach.
36
2
Learning More
This chapter explains the parts of the camera and what displays on
the screen, as well as, the basic operating instructions.
Y
P
O
Conventions Used in this Guide
• Icons are used in the text to represent the camera buttons.
• Language that displays on the screen appears inside [ ] (square
brackets).
• The directional buttons and FUNC./SET button are represented by the
following icons.
C
(Up button)
(FUNC./SET button)
(Right button)
(Left button)
(Down button)
•
: Troubleshooting tips.
•
: Hints for getting more out of your camera.
•
: Things you should be careful about.
•
: Supplemental information.
• (p. xx): Reference pages. “xx” stands for page number.
• This chapter assumes all functions are at their default settings.
37
Components Guide
Lamp (AF Assist Beam (p. 103) / RedEye Reduction Lamp (p. 103) / SelfTimer Lamp (pp. 57, 71))
Tripod Socket
Memory Card / Battery Cover (p. 12)
Strap Mount (p. 11)
Microphone (p. 28)
Lens
Shutter Button (p. 19)
Power Button (p. 20)
Flash (p. 53)
Speaker
C
Y
P
O
Screen (LCD Monitor) (p. 40)
1 (Playback) Button (p. 23)
æ Button
Indicator (p. 39)
Zoom Button
Shooting: i (Telephoto) / j (Wide
Angle) (p. 20)
Playback: k (Magnify) (p. 90) / g
(Index) (p. 86)
DC IN (Power Input) Terminal (p. 109)
A/V OUT (Audio/Video Output)
Terminal (pp. 25, 32, 91)
38
DIGITAL Terminal
n Button (p. 44)
e (Macro) (p. 61) / u (Infinity) (p. 63) /
q Button
ISO Speed (p. 67) / d (Jump) (p. 87) /
o Button
m FUNC./SET (Function/Set) Button
(p. 43)
h (Flash) (pp. 53, 61) / r Button
Q (Self-Timer) (p. 57) / a (1 Erase
Image) (p. 24) / p Button
Power Saving Function (Auto Power Down)
To save battery power, the camera shuts down automatically when it is not
operated for a certain time.
Power Saving during Shooting
The monitor will turn off approximately 1 minute after the camera is last
operated. After about 2 more minutes, the lens will retract and the power will
turn off.
When the monitor has turned off but the lens has not retracted yet, pressing
the shutter button halfway (p. 19) turns on the monitor and shooting can
continue.
Power Saving during Playback
The power will turn off approximately 5 minutes after the camera is last
operated.
Y
P
O
• You can turn off the Power Saving Function (p. 100).
• You can adjust the time before the monitor turns off (p. 100).
Indicator
C
The indicator on the back of the camera (p. 38) will light or blink green when
images are being recorded to/read from the memory card, or during any kind
of transfer (p. 21).
When the indicator blinks green, data is being recorded to/read from the
memory card or various information is being transmitted. Do not turn off
the power, open the memory card slot/battery cover, shake or jolt the
camera. These actions may corrupt the image data or cause the camera
or memory card to malfunction.
39
Information Displayed on the Screen
Shooting (Information Display)
Exposure Compensation
(p. 66)
White Balance (p. 68)
My Colors (p. 69)
Metering Modes (p. 77)
Drive Mode (p. 66)
Image Quality
(Compression) (p. 64)
Recording Pixels (p. 64)
Digital Zoom
Magnification (p. 54),
Digital Tele-Converter
(p. 55)
Y
P
O
AF Frame (p. 21)
Macro (p. 61), Infinity
(p. 63)
ISO Speed (p. 67)
Flash Mode (pp. 53, 61,
78)
Red-Eye Correction
(p. 79)
Self Timer (pp. 57, 70,
71)
Shooting Mode
Spot AE Point Frame
(p. 77)
C
AE Lock, FE Lock
(pp. 77, 78, 83)
AF Lock (p. 75)
Create Folder (p. 101)
Still Images: Recordable
shots (p. 15)
Movies: Remaining
Time/Elapsed Time
(p. 28)
Shutter Speed
Aperture Value
Disp. Overlay (p. 104)
Switching the Display
You can change the display by pressing the n button, selecting the 4
tab, and [Shooting Info].
[Off]
No Information Display
40
[On]
Information Display
Information Displayed on the Screen
Playback (Detailed Information Display)
Shooting Mode
Shutter Speed
Exposure Compensation
(p. 66)
White Balance (p. 68)
Histogram (p. 42)
Image Quality
(Compression) (p. 64),
AVI (Movies)
Metering Modes (p. 77)
Battery Charge Indicator
(p. 14)
Displayed image
number / Total number of
images
Folder Number – File
Number (p. 101)
ISO Speed (p. 67)
Aperture Value, Image
Quality (Movies)
Flash Sync (pp. 61, 78)
Macro (p. 61), Infinity
(p. 63)
File Size (pp. 64, 82)
C
Still Images: Recording
Pixels (p. 65)
Movies: Movie Length
(p. 82)
Image Editing (pp. 94 –
95)
Protect (p. 92)
My Colors (p. 69)
Red-Eye Correction
(pp. 79, 95)
Shooting Date and Time
(p. 56)
Y
P
O
Switching the Display
You can change the display by pressing the n button, selecting the 1
tab, and [Review Info].
[Off]
No Information
Display
[Standard]
Simple Information
Display
[Detailed]
Detailed Information
Display
[Focus Check]
Focus Check Display
(p. 89)
41
Information Displayed on the Screen
Display in Dark Conditions during Shooting
The display automatically brightens when shooting in dark conditions,
allowing you to check the composition (Night Display function). However, the
brightness of the image on the screen, and the brightness of the actual
image recorded may be different. Screen noise may appear and the
movement of the subject may appear somewhat jagged on the screen. This
has no effect on the recorded image.
Overexposure Warning during Playback
In “Detailed Information Display” (p. 41), overexposed areas of the image
flash on the screen.
Histogram during Playback
High
● The graph that appears in “Detailed
Low
Dark
Bright
C
42
Y
P
O
Information Display” (p. 41) is called the
histogram. The histogram shows the
distribution and amount of brightness of
an image. When the graph approaches
the right side, the image is bright, but
when it approaches the left side, the
image is dark, and in this way you can
judge the exposure.
m FUNC. Menu – Basic Operations
Commonly used shooting functions can be set with the FUNC. menu. The
menu items and options differ depending on the mode (p. 116).
Select a shooting mode.
● Press the æ button and the opqr
buttons to select the desired shooting
mode.
● Press the m button.
Display the FUNC. menu.
● Press the m button.
Y
P
O
Select a menu item.
● Press the op buttons to select a menu
item.
X The selectable options for the menu item
C
Selectable Options
Menu Items
appear in the lower part of the screen.
Select an option.
● Press the qr buttons to select an option.
● You can also select settings by pressing
the n button on options that display
.
Make the setting.
● Press the m button.
X The shooting screen will reappear and the
setting you selected will display on the
screen.
43
n Menu – Basic Operations
Various functions can be set from the menus. The menu items are organized
under tabs, such as for shooting (4) and playback (1). The menu items
differ depending on the mode (pp. 118 – 121).
Display the menu.
● Press the n button.
Select a tab.
● Press the qr buttons or press the zoom
button (p. 38) to select a tab.
Y
P
O
Select a menu item.
● Press the op buttons to select a menu
item.
● Some items require you to press the m
C
button to display a submenu in which you
change the setting.
Select an option.
● Press the qr buttons to select an option.
Make the setting.
● Press the n button.
X The standard screen will reappear.
44
Changing the Sound Settings
You can silence or adjust the volume of camera sounds.
Muting Sounds
Display the menu.
● Press the n button.
Select [Mute].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Mute],
then use the qr buttons to select [On].
Y
P
O
Adjusting the Volume
C
Display the menu.
● Press the n button.
Select [Volume].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Volume],
then press the m button.
Change the volume.
● Press the op buttons to select an item,
then use the qr buttons to adjust the
volume.
45
Returning the Camera to Default Settings
When you have mistakenly changed a setting, you can reset the camera to
the default settings.
Display the menu.
● Press the n button.
Select [Reset All].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Reset
All], then press the m button.
Y
P
O
Reset the settings.
● Press the qr buttons to select [OK], then
press the m button.
X The camera will reset to the default
settings.
C
Are there functions that cannot be reset?
• The [Date/Time] (p. 16) in the 3 tab, [Language] (p. 18), [Video System] (p. 91).
• The saved data for custom white balance (p. 68).
46
Formatting Memory Cards
Before you use a new memory card or one that has been used in other
devices, you should format the card with this camera. Formatting (initializing)
a memory card erases all data on the memory card. As you cannot retrieve
the erased data, exercise adequate caution before formatting the memory
card.
Display the menu.
● Press the n button.
Select [Format].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Format],
then press the m button.
C
Y
P
O
Format the memory card.
● Press the qr buttons to select [OK], then
press the m button.
X The memory card will be formatted.
X When formatting has finished, the menu
screen will reappear.
Low Level Format
Perform low level formatting when you think that the recording/reading
speed of a memory card has dropped.
● Follow Steps 1 – 2 above to display the
[Format] screen.
● Press the op buttons to select [Low
Level Format], then use the qr buttons to
display
.
● Press the opqr buttons to select [OK],
then press the m button.
X Low level formatting starts.
47
Changing the Image Display Time
About formatting
• The supplied memory card has already been formatted.
• When the [Memory card error] message appears, or when the camera does not
work correctly, formatting the memory card may solve the problem. Copy the
images from the memory card to a computer or other device before formatting.
Formatting or erasing data on a memory card merely changes the file
management information on the card and does not ensure its contents
are completely erased. Be careful when transferring or disposing of a
memory card. When disposing of a memory card, take precautions such
as physically destroying the card to prevent personal information leaks.
• The total capacity of the memory card displayed in the formatting screen
may be less than indicated on the memory card.
• Low level formatting may take longer than standard formatting, since all
recorded data are erased.
• You can stop a low level format of a memory card by selecting [Stop].
When stopping low level formatting, the data will be erased but the
memory card can be used without problem.
C
Y
P
O
Changing the Image Display Time
You can change the length of time the images display directly after shooting.
Press the æ button and select
» (p. 20).
Display the menu.
● Press the n button.
Select [Review].
● Press the qr buttons to select the 4 tab.
● Press the op buttons to select [Review],
then press the qr buttons to select the
display time.
● If you select [Off], the image will not display.
● If you select [Hold], the image displays
until you press the shutter button halfway.
48
3
Shooting in Special
Conditions and Commonly
Used Functions
Y
P
O
This chapter explains how to shoot in different conditions, as well as
how to use other common functions, such as the flash and self-timer.
C
• When you select a mode for a specific scene the camera will
automatically select any necessary settings. All you need do is press the
shutter button to take an optimized picture.
• This chapter assumes the » mode is set for “! Turning the Flash Off”
(p. 53) to “Ò Using the Self-Timer” (p. 57). When shooting in a K
mode, check which functions are available in that mode (pp. 116 – 119).
49
K Shooting in Special Conditions
The camera will select the necessary settings for the conditions in which you
wish to shoot when you select the matching mode.
Select a shooting mode.
● Press the æ button.
● Press the qr buttons to select K, then
use the op buttons to select the type of
scene you want to shoot.
● Press the m button.
Shoot.
Y
P
O
I Take portraits (Portrait)
● Produces a soft effect when
C
photographing people.
F Take snapshots at night
(Night Snapshot)
● Lets you take beautiful snapshots of
people against city nightscapes or night
backgrounds.
● If you hold the camera firmly, you can take
pictures with reduced camera shake, even
without a tripod.
V Take shots of kids and pets
(Kids&Pets)
● Lets you capture subjects that move
around, such as children and pets, without
missing photo opportunities.
50
K Shooting in Special Conditions
’ Take indoor shots (Indoor)
● Lets you shoot indoors with natural colors.
U Shoot sunsets (Sunset)
● Lets you take shots of sunsets in vivid
colors.
Y
P
O
t Take shots of fireworks
(Fireworks)
● Lets you take shots of fireworks in vivid
colors.
C
w Take shots of people at the beach
(Beach)
● Lets you take bright shots of people on
sandy beaches where the reflected
sunlight is strong.
y Take shots of aquatic life in an
aquarium (Aquarium)
● Lets you take natural-colored shots of
aquatic life in indoor aquariums.
51
K Shooting in Special Conditions
O Take shots of foliage (Foliage)
● Lets you shoot trees and leaves, such as
new growth, autumn leaves or blossoms,
in vivid colors.
P Take shots of people in snow
(Snow)
● Lets you take bright, natural-colored shots
of people against snowy backgrounds.
Y
P
O
• In F, V, ’ or y mode, images may appear coarse because the ISO
speed (p. 67) is increased to match the shooting conditions.
• In t mode, attach the camera to a tripod to prevent the camera from
moving and blurring the image.
C
52
! Turning the Flash Off
You can shoot with the flash turned off.
Press the r button.
Select !.
● Press the qr buttons to select !, then
press the m button.
X ! will appear.
● Follow the steps above to return the
Y
P
O
setting to
C
What if a flashing
.
appears?
When you press the shutter button halfway in low light conditions where camera
shake is likely, a flashing
will appear. Attach the camera to a tripod to prevent
it from moving.
53
Zooming in More Closely on Subjects
(Digital Zoom)
You can use the digital zoom to zoom up to a maximum of 13x and capture
subjects that are too far away for the optical zoom (p. 20) to enlarge. The
images may appear coarse, however, depending on the recording pixel
setting (p. 64) and the zoom factor used.
Press the zoom button toward i.
● Hold the button until zooming stops.
X When you release the button, the largest
possible zoom factor without image
deterioration, and
will appear.
Press the zoom button toward i
again.
Y
P
O
X The digital zoom will further zoom in on
the subject.
C
Zoom Factors at which Images Deteriorate
Recording Pixels
Optical Zoom
Digital Zoom
3.3x
3.3x
4.6x
7.5x
13x
: No image deterioration (zoom factor appears white)
: Image deterioration (zoom factor appears blue)
: Maximum zoom factor without deterioration (Safety Zoom)
Turning off the digital zoom
To turn off the digital zoom, press the n button, select the 4 tab, and select
[Digital Zoom] and the [Off] option.
54
Zooming in More Closely on Subjects (Digital Zoom)
The focal length when using digital zoom is 37 – 488 mm (35mm film
equivalent).
Digital Tele-Converter
The focal length of the lens can be increased by an equivalent of 1.4x or
2.3x. This enables a faster shutter speed and less chance of camera shake
than the zoom (including digital zoom) used by itself at the same zoom
factor.
The images may appear coarse, however, depending on the combination of
recording pixel (p. 64) and digital tele-converter settings used.
Select [Digital Zoom].
Y
P
O
● Press the n button.
● Press the qr buttons to select the 4 tab,
then use the op buttons to select [Digital
Zoom].
Accept the setting.
C
● Press the qr buttons to select [1.4x] or
[2.3x].
● Pressing the n button will return you
to the shooting screen.
X The view will be enlarged,
and the
zoom factor will display on the screen.
● To return to standard digital zoom, select
[Digital Zoom] and the [Standard] option.
Combinations that Cause Image Deterioration
• Using [1.4x] at a recording pixel setting of
or
will cause image
deterioration (
and the zoom factor will display in blue).
• Using [2.3x] at a recording pixel setting of
,
or
will cause image
deterioration (
and the zoom factor will display in blue).
• The respective focal lengths when using [1.4x] and [2.3x] are 51.8 –
171 mm and 85.1 – 281 mm (35mm film equivalent).
• The digital tele-converter cannot be used together with the digital zoom.
55
‘ Inserting the Date and Time
You can insert the shooting date and time in the lower right corner of an
image. Once inserted, however, they cannot be deleted. Be sure to check
beforehand that the date and time are correctly set (p. 16).
Select the recording pixels.
● After pressing the m button, press the
op buttons to select
.
Select ‘.
● Press the qr buttons to select ‘.
Select an option.
● After pressing the n button, press
Y
P
O
the qr buttons to select [Date] or [Date &
Time], then press the m button.
Shoot.
● The gray areas on the top and bottom of the
C
screen will not be printed. Be sure your subject
is within the printable area when you shoot.
X The date will be recorded in the lower
right-hand corner of the image.
● To restore to the original setting, select
in Step 2.
Inserting and printing the date and time in images which do
not have an embedded date and time
• Use the DPOF print settings (p. 96) to print.
• Use the included software to print.
Refer to the Software Starter Guide for details.
• Connect the camera to a printer to print.
Refer to the Personal Printing Guide for details.
• Images shot in ‘ are shot with a small number of recording pixels.
Therefore, printing on paper larger than postcard or 3.5" x 5" size will
result in rough photo prints (p. 65).
• The gray areas on the top and bottom of the screen will not be printed;
however, the entire image displayed will be recorded.
56
Ò Using the Self-Timer
The self-timer can be used to shoot a group photo that includes the camera
operator. The camera will activate approximately 10 seconds after the
shutter button is pressed.
Press the p button.
Select Ò.
● Press the op buttons to select Ò, then
press the m button.
X Once set, Ò will appear.
C
Y
P
O
Shoot.
● Press the shutter button halfway to focus
on the subject, then press it fully.
X When the self-timer starts, the lamp blinks
and the self-timer sound plays.
X Two seconds before the shutter releases,
the lamp and sound speed up (the lamp
remains lit when the flash will fire).
● To restore the original setting, select
in Step 2.
You can change the delay time and number of shots taken (p. 71).
57
C
58
Y
P
O
4
Selecting Settings Yourself
In this chapter you will learn how to use the various functions in G
mode to progressively advance your shooting skills.
C
Y
P
O
• This chapter assumes that G mode has been selected by pressing the
æ button, then the qr buttons.
• G stands for Program AE.
• Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 116 – 119).
59
G Shooting in Program AE
You can select the settings for various functions to suit your preferences.
AE stands for Auto Exposure.
Select the G mode.
● After pressing the æ button, press the
qr buttons to select G, then press the
m button.
Adjust the settings according to
your purposes (pp. 61 – 71).
Shoot.
Y
P
O
What if the shutter speed and aperture value are displayed
in red?
C
If a correct exposure cannot be obtained when pressing the shutter button
halfway, the shutter speed and aperture value display in red. Try the following
settings to obtain the correct exposure.
• Turn on the flash (p. 61)
• Select a higher ISO speed (p. 67)
60
h Turning the Flash On
You can make the flash fire every time you shoot. The possible flash range
is approximately 30 cm – 3.0 m (12 in. – 9.8 ft.) at maximum wide angle,
when the zoom button is pushed toward j, and approximately 30 cm –
2.0 m (12 in. – 6.6 ft.) at maximum telephoto, when the zoom button is
pushed toward i.
Select h.
● After pressing the r button, press the qr
buttons to select h, then press the m
button.
X Once set, h will appear.
Y
P
O
e Shooting Close-ups (Macro)
You can shoot an object at a close distance or even shoot extreme closeups of it. The possible shooting range is approximately 3 – 50 cm (1.2 in. –
1.6 ft.) at maximum wide angle, when the zoom button is pushed toward j,
and approximately 25 – 50 cm (9.8 in. – 1.6 ft.) at maximum telephoto, when
the zoom button is pushed toward i.
C
Select e.
● After pressing the q button, press the qr
buttons to select e, then press the m
button.
X Once set, e will appear.
Using Î
You are recommended to attach the camera to a tripod and shoot in Î, to prevent
the camera from moving and blurring the image (p. 70).
The edges of the image may darken if the flash fires.
61
œ Shooting Close-ups (Super Macro
Shooting)
You can zoom in and shoot while close to the subject. The possible shooting
range is approximately 1 – 10 cm (0.39 – 3.9 in.) from the end of the lens.
Using the digital zoom will allow you to zoom in even more and shoot while
close to the subject.
Using digital zoom may cause images to appear coarse at some recording
pixel settings (p. 64).
Select œ.
● Press the æ button, then press the
qr buttons to select K.
● Press the op buttons to select œ, then
Y
P
O
press the m button.
X The optical zoom will lock at the maximum
wide angle.
Use the zoom button to compose
the shot.
C
X The camera will zoom in and the zoom
factor will appear.
Zoom Factors at which Images Deteriorate
• No image deterioration (zoom factor appears white)
• Image deterioration (zoom factor appears blue)
Using Î
You are recommended to attach the camera to a tripod and shoot in Î, to prevent
the camera from moving and blurring the image (p. 70).
62
u Shooting Far Away Subjects (Infinity)
You can shoot landscapes and far away subjects. The focusing range is 3 m
(9.8 ft.) and greater from the camera.
Select u.
● After pressing the q button, press the qr
buttons to select u, then press the m
button.
X Once set, u will appear.
C
Y
P
O
63
Changing the Recording Pixels (Image Size)
You can select from six settings.
Select the recording pixels.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
X The setting you selected will display on
the screen.
If you select ‘ or
, you cannot use the Digital Zoom (p. 54) or Digital
Tele-Converter (p. 55).
Y
P
O
Changing the Image Quality (Compression Ratio)
You can select from the following two levels of image quality:
(Fine),
(Normal).
C
Select the image quality.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
X The setting you selected will display on
the screen.
64
Changing the Image Quality (Compression Ratio)
Approximate Values for Recording Pixels and Image Quality
Recording Pixels
Image
Quality
Single Image
Data Size
(Approx. KB)
Recordable Number of Images
128 MB
2 GB
8 GB
(Large)
10 M/3648 x 2736
2565
47
749
2994
1226
99
1536
6140
(Medium 1)
6 M/2816 x 2112
1620
75
1181
4723
780
156
2363
9446
(Medium 2)
4 M/2272 x 1704
1116
109
1707
6822
556
217
3235
12927
(Medium 3)
2 M/1600 x 1200
558
217
3235
12927
(Small)
0.3 M/640 x 480
‘ (Date Stamp)
2 M/1600 x 1200
(Widescreen)
3648 x 2048
C
Y
P
O
278
411
6146
24562
150
711
10245
40937
84
1118
15368
61406
558
217
3235
12927
1920
64
1007
4026
918
132
2048
8187
• The values in the table are measured according to Canon standards and may change
depending on the subject, memory card and camera settings.
Approximate Values when Selecting by Paper Size
A2
A3
A4, Letter size
5" x 7"
●
Suitable for sending images as e-mail
attachments.
● ‘ is suitable for printing postcard or 3.5"
x 5" size prints.
●
For printing on wide size paper.
Postcard size
3.5" x 5"
65
Adjusting the Brightness (Exposure
Compensation)
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of -2 to +2.
Select the exposure
compensation.
● After pressing the m button, press the
op buttons to select #.
Correct the exposure.
● Press the qr buttons to correct the
exposure, then press the m button.
Y
P
O
X The exposure compensation amount will
display on the screen.
W Continuous Shooting
You can shoot continuously at about 0.8 images/second.
C
Select the drive mode.
● After pressing the m button, press the
op buttons to select
.
Select W.
● Press the qr buttons to select W, then
press the m button.
X Once set, W will appear.
Shoot.
X As long as you hold the shutter button down,
the camera will shoot successive images.
• Cannot be used with the self-timer (pp. 57, 70, 71).
• For continuous shooting, the focus and exposure are locked when the
shutter button is pressed halfway.
• As the number of images increases, the shooting intervals may take
longer.
• If the flash fires, shooting intervals may take longer.
66
- Changing the ISO Speed
Select the ISO speed.
● After pressing the o button, press the
op buttons to select the ISO speed, then
press the m button.
X Once set, the ISO speed will appear.
Automatically sets the optimal speed for the shooting mode and shooting
conditions.
Low Fine weather conditions, outdoor shooting
Cloudy, Twilight
High Nightscapes, Dark interiors
Y
P
O
Changing the ISO speed
• Lowering the ISO speed results in sharper images, but there may be an
increased chance of image blurring in certain shooting conditions.
• Raising the ISO speed results in a faster shutter speed, reducing camera shake
and letting the flash reach greater distances to the subject. The images,
however, will appear coarse.
C
When the camera is set to
, you can press the shutter button halfway
to display the automatically set ISO speed.
67
Adjusting the White Balance
The white balance (WB) function sets the optimal white balance for natural
looking colors.
Select the white balance.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
X The setting you select will display on the
screen.
Y
P
O
Auto
Automatically sets the optimal white balance for the shooting
conditions.
Day Light
Fine weather conditions, outdoor shooting
Cloudy
Cloudy, shady, twilight conditions
Tungsten
Tungsten, bulb-type (3-wavelength) fluorescent lighting
Fluorescent
Fluorescent H
Custom
Warm-white fluorescent, cool-white fluorescent, warm-whitetype (3-wavelength) fluorescent lighting
Daylight fluorescent, daylight-type (3-wavelength) fluorescent
lighting
C
Manually sets a custom white balance.
Custom White Balance
You can adjust the white balance to the light source at the shooting location
for natural looking colors when shooting. Make sure that you set the white
balance under the lighting conditions of the shooting scene.
● In Step 2 above, select
.
● Make sure the entire screen is filled with
the white subject, then press the n
button.
X The tint on the screen will change when a
white balance data is set.
68
Changing the Tone of an Image (My Colors)
You can change the tone of an image to sepia or black and white when
shooting.
Select My Colors.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
X The setting you select will display on the
screen.
My Colors Off
Y
P
O
—
Vivid
Emphasizes the contrast and color saturation for a vivid
impression.
Neutral
Tones down the contrast and color saturation for neutral hues.
Sepia
Sepia tones.
B/W
Black and white.
Custom Color
C
You can adjust the tone of the image to your preference.
The white balance cannot be set in the
and
modes (p. 68).
Custom Color
The contrast, sharpness and color saturation in an image can be selected
and set from 5 different levels.
● Select
in Step 2 above and press the
n button.
● Press the op buttons to select an option,
then use the qr buttons to select a value.
● The more to the right, the stronger/deeper
the effect gets, the more to the left, the
weaker/lighter the effect gets.
● Press the n button to accept the
setting.
69
Shooting Using a TV Monitor
You can use a TV to display the camera screen content.
• Connect the camera to a TV as described in “Viewing Images on a TV”
(p. 91).
• Shooting procedures are the same as when using the camera’s monitor.
Î Shooting Using the Two Second Self-Timer
You can set the self-timer to a delay of approximately two seconds.
Select Î.
● After pressing the p button, press the
Y
P
O
op buttons to select Î, then press the
m button.
X Once set, Î will appear.
● Follow Step 3 on p. 57 to shoot.
C
70
$ Customizing the Self-Timer
You can set the time delay (0 – 30 seconds) and the number of shots taken
(1 – 10 shots).
Select $.
● After pressing the p button, press the
op buttons to select $, then
immediately press the n button.
Select the settings.
● Press the op buttons to select [Delay] or
[Shots].
● Press the qr buttons to select a value,
then press the m button.
Y
P
O
● Follow Step 3 on p. 57 to shoot.
What if the number of shots is set to two or more shots?
• Exposure and white balance settings are set with the first shot.
• When you set the time delay for more than 2 seconds, the self-timer lamp and
sound speed up 2 seconds before the shutter releases (when the flash will fire,
the lamp lights).
C
• If the flash fires, the shooting interval may be longer.
• If you set a high number of shots, the shooting interval may be longer.
• If the memory card becomes full, shooting stops automatically.
71
Changing the Composition with the
Focus Lock
While you press and hold the shutter button halfway, the focus and exposure
are fixed. You can now recompose and shoot. This is called Focus Lock.
Focus.
● Center the subject you want in focus, and
press the shutter button halfway.
● Confirm that the AF Frame on the subject
is green.
Recompose.
Y
P
O
● Hold the shutter button pressed halfway
and recompose the scene.
Shoot.
● Press the shutter button fully.
C
72
5
Getting More Out of Your
Camera
Y
P
O
This chapter serves as the advanced version of Chapter 4 and
explains how to take pictures using various functions.
C
• This chapter assumes that G mode has been selected by pressing the
æ button, then the qr buttons.
• “≈ Shooting Long Exposures” (p. 80) is explained with the camera set to
≈ mode. To set this mode, press the æ button, use the qr buttons
to select K mode, then use the op buttons to select ≈.
• Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 116 – 119).
73
Changing the AF Frame Mode
You can change the AF (Auto Focus) frame mode to match the conditions
you want to shoot.
Select [AF Frame].
● Press the n button, select the 4
tab, select [AF Frame], then press the qr
buttons to select an option.
Face AiAF
• Detects people’s faces and sets the focus, exposure (evaluative metering
only) and white balance (
only).
• When the camera is pointed at subjects, a white frame appears on the
face the camera judges to be the main subject, and gray frames (max. 2)
will appear on other faces. When the shutter button is pressed halfway, up
to 5 green frames will appear on faces on which the camera focuses.
Y
P
O
• If a face is not detected and only gray frames (no white frame) appear,
up to 5 green frames will appear on the areas the camera focuses on
when the shutter button is pressed halfway.
• Examples of faces that cannot be detected:
C
• Subjects that are far away or extremely close.
• Subjects that are dark or light.
• Faces turned to the side or at a diagonal, or faces with a portion hidden.
• The camera may mistakenly identify non-human subjects as a face.
• If the camera cannot focus when you press the shutter button halfway,
the AF frame will not appear.
74
% Shooting with the AF Lock
Center
The AF frame is fixed at the center. This is effective for focusing on a specific
point.
You can reduce the AF frame size
• Press the n button, select the 4 tab, then select the [AF Frame Size]
menu item and [Small] option.
• The setting is configured to [Normal] when the Digital Zoom (p. 54) or Digital
Tele-Converter (p. 55) is used.
If the camera cannot focus when you press the shutter button halfway, the
AF frame will turn yellow.
Y
P
O
% Shooting with the AF Lock
The focus can be locked. After locking the focus, the focal distance will not
change even when you release your finger from the shutter button.
C
Lock the focus.
● Keep the shutter button pressed halfway
and press the q button.
X The focus locks and % is displayed on
the screen.
● If you release your finger from the shutter
button, and press the q button once more,
% will disappear and the focus will
unlock.
Compose the scene and shoot.
75
Magnifying the Focal Point
If you press the shutter button halfway, the AF frame will magnify and you
can check the focus.
Select [AF-Point Zoom].
● Press the n button and select [AFPoint Zoom] on the 4 tab. Use the qr
buttons to select [On].
Check the focus.
● Press the shutter button halfway.
X In [Face AiAF] (p. 74), the face selected
Y
P
O
as the main subject will appear magnified.
X In [Center] (p. 75), the contents of the
center AF frame will appear magnified.
What if the display does not magnify?
C
The display will not appear magnified in [Face AiAF] if a face cannot be detected
or is too big in relation to the screen. In [Center], it will not appear magnified if the
camera cannot focus.
The magnified display will not appear when using the Digital Zoom (p. 54)
or Digital Tele-Converter (p. 55), or when connected to a TV (p. 70).
76
Changing the Metering Mode
You can change the metering mode (brightness measuring function) to
match the shooting conditions.
Select the metering mode.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
X The setting will display on the screen.
Suitable for standard shooting conditions, including back
lit shots. Automatically adjusts the exposure to match the
shooting conditions.
Averages the light metered from the entire frame, but
Center Weighted Avg.
gives greater weight to the center.
Only meters within the
(Spot AE Point frame) that
Spot
appears at the center of the screen.
Evaluative
C
Y
P
O
& Shooting with the AE Lock
When you wish to take several shots with the same exposure, you can set the
exposure and focus separately using the AE lock. AE stands for “Auto
Exposure”.
Lock the exposure.
● Point the camera toward the subject and
press the o button while pressing the
shutter button halfway.
X When & appears, the exposure will be
set.
● If you release your finger from the shutter
button and press the o button again, &
will disappear and the AE will unlock.
Compose the scene and shoot.
77
( Shooting with the FE Lock
Just as with the AE lock (p. 77), you can lock the exposure for shooting with
the flash. FE stands for “Flash Exposure”.
Select h (p. 61).
Lock the exposure.
● Point the camera toward the subject and
press the o button while pressing the
shutter button halfway.
X The flash will fire and when ( appears,
the exposure will be set.
● If you release your finger from the shutter
button and press the o button again, (
will disappear and the FE will unlock.
Y
P
O
Compose the scene and shoot.
… Shooting with Slow Synchro
C
You can make the main subject, such as people, appear bright by having the
camera provide the appropriate illumination with the flash. At the same time,
you can use a slow shutter speed to brighten the background that the light
from the flash cannot reach.
Select ….
● After pressing the r button, press the qr
buttons to select …. Then press the m
button.
X Once set, … will appear.
● Even if the flash fires, ensure that the
subject does not move until the shutter
sound ends.
Attach the camera to a tripod to prevent the camera from moving and
blurring the image.
78
ΠRed-Eye Correction
You can automatically correct red eyes in images taken with the flash.
Select [Flash Settings].
● Press the n button, select [Flash
Settings] from the 4 tab and press the
m button.
Adjust the setting.
● Press the op buttons to select [Red-Eye
Corr.] and press the qr buttons to select
[On].
X Πwill appear (p. 40).
Y
P
O
Red-eye correction may be applied to other red parts than red eyes. For
example, when red make-up has been used around eyes.
C
• You can correct recorded images (p. 95).
• If you press the r button as shown on the screen in Step 2 and then
press the n button, the Flash Settings screen will display.
79
≈ Shooting Long Exposures
You can set the shutter speed to a range between 1 and 15 seconds to
shoot long exposures. However, you should attach the camera to a tripod to
prevent the camera from moving and blurring the image.
Select ≈.
● After pressing the æ button, press the
qr buttons to select K.
● Press the op buttons to select ≈, then
press the m button.
Select the shutter speed.
● After pressing the m button, press the
Y
P
O
op buttons to select ).
● Press the qr buttons to select a shutter
speed, then press the m button.
Confirm the exposure.
● When you press the shutter button
C
halfway, the exposure for the selected
shutter speed will appear.
• The brightness of the image may differ from the brightness of the screen
in Step 3 when the shutter button was pressed halfway.
• When shutter speeds of 1.3 seconds or slower are used, images are
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
If the flash fires, the image may be overexposed. If this happens, set the
flash to ! and shoot.
80
6
Using Various Functions for
Shooting Movies
Y
P
O
This chapter provides more advanced information than the “X
Shooting Movies” and “Viewing Movies” sections of Chapter 1.
C
• This chapter assumes that X mode has been selected by pressing the
æ button, then the qr buttons.
81
Changing the Image Quality
You can select from among three image quality settings.
Select the image quality.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
X The setting will display on the screen.
Image Quality Table
Image Quality
(Recording Pixels/Frame Rate)
640 x 480 pixels, 30 frames/sec.
Y
P
O
640 x 480 pixels, 30 frames/sec. LP
C
320 x 240 pixels, 30 frames/sec.
Estimated Shooting Time
Image Quality
(Frame Rate)
Content
For shooting standard quality movies.
The image quality will be lower than with
,
but you can record twice the length.
Since the number of the recording pixels is
smaller, the image quality will be lower than
with
, but you can record three times the
length.
Shooting Time
128 MB
2 GB
8 GB
1 min. 4 sec.
16 min. 47 sec.
1 hr. 7 min. 6 sec.
2 min. 7 sec.
33 min. 2 sec.
2 hrs. 12 min. 3 sec.
3 min. 1 sec.
46 min. 33 sec.
3 hrs. 6 min. 4 sec.
• Based on Canon’s testing standards.
• Recording will automatically stop when either the clip file size reaches 4 GB or the
recording time reaches approximately 1 hour.
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
82
AE Lock/Exposure Shift
In X mode, you can set the exposure or change it in 1/3 steps within a range
of ±2.
Focus.
● Press the shutter button halfway to focus.
Lock the exposure.
● Press the o button to lock the exposure.
The exposure shift bar appears.
● Press the o button again to release the lock.
Change the exposure.
● While looking at the screen, press the qr
Y
P
O
buttons to adjust the brightness.
Shoot.
Other Shooting Functions
C
The following functions can be used in the same way as for still images.
• Zooming in More Closely on Subjects (Digital Zoom) (p. 54)
You can use the digital zoom, but the optical zoom cannot be used.
If you want to shoot at the maximum zoom factor, you should adjust the
optical zoom to the maximum before shooting.
The sound of the zoom will be recorded.
• Ò Using the Self-Timer (p. 57)
• e Shooting Close-ups (Macro) (p. 61)
• u Shooting Far Away Subjects (Infinity) (p. 63)
• Adjusting the White Balance (p. 68)
• Changing the Tone of an Image (My Colors) (p. 69)
• Shooting Using a TV Monitor (p. 70)
• Î Shooting Using the Two Second Self-Timer (p. 70)
• Turning off the AF Assist Beam (p. 103)
• Displaying the Overlay (p. 104)
[3:2 Guide] is not available.
83
Playback Functions
The following functions can be used in the same way as for still images.
• Erasing Images (p. 24)
• g Searching Images by Sets of 9 (Index Display) (p. 86)
• d Searching for Images Using the Jump Display (p. 87)
• . Viewing Slideshows (p. 88)
• + Changing Image Transitions (p. 90)
• Viewing Images on a TV (p. 91)
• : Protecting Images (p. 92)
• / Erasing All Images (p. 93)
• \ Rotating Images (p. 93)
Y
P
O
Summary for “Viewing Movies” (p. 29)
Exit
Playback
Slow Motion Playback (you can use the qr buttons to adjust the speed. Sound
will not play back.)
C
Display the first frame
Previous frame (Rewind if you hold down the m button.)
Next frame (Fast forward if you hold down the m button.)
Display the last frame
Displays when connected to a PictBridge compliant printer (p. 25).
Refer to the Personal Printing Guide for details.
84
7
Using Playback and Other
Functions
Y
P
O
The first part of this chapter explains various ways to play back and
edit images. The latter part explains how to specify images for
printing.
C
• Press the 1 button to select the Playback mode before operating the
camera.
• It may not be possible to play back or edit images that have been edited
on a computer, had their file name changed, or have been taken on a
different camera.
• The edit function (pp. 94 – 95) cannot be used if the memory card does
not have free space available.
85
g Searching Images by Sets of 9
(Index Display)
Displaying 9 images at a time lets you quickly find the image you want.
Press the zoom button toward g.
X Images will display in an index. The
selected image will have a green frame
and be enlarged.
Select an image.
● Press the opqr buttons to select an
image.
● Pressing the zoom button toward k will
Y
P
O
display the selected image by itself.
Searching 9 Images at a Time
Press the zoom button toward g.
C
X Images will display in an index.
Press the zoom button toward g
again.
X The jump bar appears.
Jump Bar
Change the displayed images.
● Press the qr buttons to switch between
sets of 9 images.
● Pressing the zoom button toward k
restores the index display.
When the jump bar displays, holding the m button and pressing the qr
buttons jumps to the first or last set of images.
86
d Searching for Images Using the Jump
Display
When there are many images on the memory card, you can search them by
a specified method or image unit.
Select a jump method.
● In Single Image Playback, press the o
button.
X The search method and the position of the
currently displayed image will appear at
the bottom of the screen.
● Press the op buttons to select the
desired search method.
Y
P
O
Jump to an image.
● Press the qr buttons.
X The camera will use the selected search
method to jump to an image.
Position of currently
displayed image
C
Jump 10 Images
● To return to Single Image Playback, press
the n button.
Jumps over 10 images at a time.
Jump 100 Images
Jumps over 100 images at a time.
Jump Shot Date
Jumps to the first image in each shooting date group.
Jump to Movie
Jump to Folder
Jumps to a movie.
Jumps to the first image in each folder.
• The number of images matching the search filter will display on the right side of the
screen except for
and
.
If there are no images matching the search filter, the qr buttons will not
function.
87
. Viewing Slideshows
You can automatically play back images recorded to a memory card. Each
image displays for approximately 3 seconds.
Select [Slideshow].
● Press the n button and select the 1
tab, then select [Slideshow] and press the
m button.
Select a transition effect and start
the slideshow.
Y
P
O
● Press the qr buttons to select a transition
effect, then press the m button.
X The slideshow will start a few seconds
after [Loading image…] displays.
● You can pause/restart a slideshow by
pressing the m button again.
● Press the n button to stop the
slideshow.
C
Switches between images without transition effect.
Fades one image out and the next in.
The image slides out to the left and the next image appears.
• If you press the qr buttons during playback, the image will switch. If you
press and hold down the qr buttons you can fast-forward through
images.
• The power saving function does not work during slideshows (p. 39).
88
Checking the Focus
You can magnify the area of a recorded image that was inside the AF frame
or the area of a face that was detected to check the focus.
Select [Focus Check].
● Press the n button, select the 1 tab
and [Info Disp.].
● Press the qr buttons to select [Focus
Check], then press the n button.
X A white frame will appear where the AF
frame or face was when the focus was
set.
X A gray frame will appear on a face
detected during playback.
X The area within the orange frame appears
magnified.
Y
P
O
Switch frames.
● Pressing the m button will switch to a
C
different white frame.
Change the magnification level or
location.
● Press the zoom button toward k.
● Press the zoom button to change the
display size, and press the opqr
buttons to change the display position
while checking the focus.
● Pressing the n button resets the
display to Step 2.
89
k Magnifying Images
Press the zoom button toward k.
● The display will zoom in on the image and
Approximate Location
of Displayed Area
will appear. If you continue to hold
the zoom button, it will continue to zoom in
up to a factor of 10x.
● If you press the opqr buttons, you can
move the location of the displayed area.
● Pressing the zoom button toward g will
reduce the magnification, and if you
continue to hold the zoom button, Single
Image Playback will be restored.
● When
appears on the screen,
press the m button to switch to
.
Press the qr buttons to switch between
images at the same level of magnification.
Press the m button again to return to
.
C
Y
P
O
+ Changing Image Transitions
You can select from three transition effects when switching between images
in single image playback.
Select [Transition].
● Press the n button and select the 1
tab, then select [Transition] and use the
qr buttons to select a transition effect.
● Press the n button to accept the
setting.
Switches between images without a transition effect.
Fades one image out and the next in.
Slides images left or right when the qr buttons are pressed.
90
Viewing Images on a TV
Using the supplied AV cable, you can connect the camera to a TV to view
images you have shot.
Items to Prepare
• Camera and TV
• AV cable supplied with the camera (p. 2)
Turn off the camera and TV.
Connect the camera to the TV.
● Open the camera’s terminal cover and
White or black
Yellow
Yellow
Black
C
fully insert the plug of the supplied AV
cable into the camera’s A/V OUT terminal.
● Insert the cable plug fully into the video
input terminals as shown in the illustration.
Y
P
O
Turn on the TV and switch it to the
input to which the cable is
connected.
Turn on the camera.
● Press the 1 button to turn on the camera.
X The image will appear on the TV (nothing
will appear on the monitor of the camera).
● After you finish viewing, turn off the
camera and TV, and unplug the AV cable.
What if the images don’t properly display on the TV?
Images will not display correctly if the camera’s video output setting (NTSC/PAL)
does not match the TV system. Press the n button, select the 3 tab and
[Video System] to switch to the correct video system.
91
: Protecting Images
You can protect important images so that they cannot be erased by the
camera (pp. 24, 93).
Select [Protect].
● Press the n button, select the 1 tab
and [Protect], and then press the m
button.
Protect the image.
● Press the qr buttons to select an image,
then press the m button.
Y
P
O
X Once protected,
will appear.
● Pressing the m button again deselects
the image and
will disappear.
● To protect additional images, repeat the
C
above procedure.
● Pressing the n button will restore the
menu screen.
If you format the memory card (p. 47), protected images will also be
erased.
Protected images cannot be erased with the camera’s erase function. To
erase an image, cancel protection first.
92
/ Erasing All Images
You can select and erase all images at once. Since erased images cannot
be recovered, exercise adequate caution before erasing. Protected images
(p. 92) cannot be erased.
Select [Erase all].
● Press the n button, select the 1 tab
and [Erase all], and press the m button.
Erase all images.
● Press the qr buttons to select [OK], then
Y
P
O
press the m button.
X All images will be erased.
● Pressing the n button will restore the
menu screen.
C
\ Rotating Images
You can change the orientation of an image and save it.
Select [Rotate].
● Press the n button and select the 1
tab, then select [Rotate] and press the m
button.
Rotate the image.
● Press the qr buttons to select an image.
● The image will rotate 90° with each press
of the m button.
● Pressing the n button will restore the
menu screen.
93
= Resizing Images
You can resize images to a lower pixel setting and save the resized image
as a separate file.
Select [Resize].
● Press the n button and select the 1
tab, then select [Resize] and press the m
button.
Select an image.
● Press the qr buttons to select an image,
then press the m button.
Select an image size.
Y
P
O
● Press the qr buttons to select a size,
then press the m button.
X The [Save new image?] screen will
appear.
C
Save the new image.
● Press the qr buttons to select [OK], then
press the m button.
X The image will be saved as a new file.
Display the new image.
● When you press the n button, the
[Display new image?] screen will appear.
If you press the qr buttons, select [Yes]
and press the m button, the saved image
will display.
• You cannot resize an image to a larger size.
• You cannot resize images taken with the
and
94
settings.
] Correcting the Red-Eye Effect
You can automatically correct red eyes in images and save them as new
files.
Select [Red-Eye Correction].
● Press the n button, select the 1 tab
and [Red-Eye Correction], then press the
m button.
X The [Red-Eye Correction] screen will
appear.
Select an image.
● Press the qr buttons to select an image.
Y
P
O
Correct the image.
● When you press the m button, red-eye
C
detected by the camera will be corrected
and a frame will appear around the
corrected portion.
● You can zoom the image using the
procedures in “k Magnifying Images”
(p. 90).
Save as a new image and display.
● Press the opqr buttons to select [New
File], then press the m button.
X The image will be saved as a new file.
● Perform Step 5 on p. 94.
• Some images may not be properly corrected.
• When [Overwrite] in Step 4 is selected, the uncorrected image is
overwritten with the corrected data, erasing the original image.
• Protected images cannot be overwritten.
95
Selecting Images for Printing (DPOF)
You can select certain images on a memory card for printing (up to 998
images) and specify the number of print copies so they can be printed
together or processed at a photo developer service. You can then print all
the selected images at once or take the memory card to a photo developer
to order prints. These selection methods comply with the DPOF (Digital Print
Order Format) standards.
Print Settings
You can set the print type, date and file number. These settings apply to all
images selected for printing.
Select [Print Settings].
● Press the n button and select the 2
Y
P
O
tab, then select [Print Settings] and press
the m button.
Adjust the settings.
● Press the op buttons to select a menu
item, then use the qr buttons to select an
option.
X Pressing the n button accepts the
settings and restores the menu screen.
Print Type
Date
File No.
Clear DPOF data
C
Standard
Index
Both
On
Off
On
Off
On
Off
Prints one image per page.
Prints several reduced size images per page.
Prints both standard and index formats.
Prints the date from the shooting information.
–
Prints the file number.
–
Removes all print settings after printing.
–
• Some printers or photo developer services may not be able to reflect all
of the print settings in the output.
•
may display when using a memory card with print settings set by a different
camera. These settings will be overwritten by those set by your camera.
• Images with the date embedded always print with the date, regardless of
the [Date] setting. As a result, some printers may print the date twice on
these images if [Date] is also set to [On].
96
Selecting Images for Printing (DPOF)
• With [Index] selected, the [Date] and [File No.] options cannot be set to
[On] at the same time.
• The date will be printed in the style set in the [Date/Time] function in the
3 tab (p. 16).
Selecting the Number of Copies
Select [Select Images & Qty.].
● Press the n button and select the 2
tab, then select [Select Images & Qty.]
and press the m button.
Select an image.
Y
P
O
● Press the qr buttons to select an image,
then press the m button.
X You will be able to set the number of print
copies.
C
● If you select [Index],
appears.
● Press the m button again to deselect the
images.
will disappear.
Set the number of prints.
● Press the op buttons to set the number
of prints (max. 99).
● Repeat Steps 2 and 3 to select other
images and the number of prints for each.
● You cannot set the number of print copies
for Index prints. You can only select which
images to print.
X Pressing the n button accepts the
settings and restores the menu screen.
97
Selecting Images for Printing (DPOF)
Set All Images to Print Once
Select [Select All Images].
● Select [Select All Images] from the screen
in Step 1 on p. 97 and press the m
button.
Make print settings.
● Press the qr buttons to select [OK], then
press the m button.
X All images will be set to print once.
Clearing All Selections
Y
P
O
Select [Clear All Selections].
● Select [Clear All Selections] in Step 1 on
p. 97, and press the m button.
All selections will be cleared.
● Press the qr buttons to select [OK], then
C
press the m button.
X All selections will be cleared.
Print Added Images
The following examples use the Canon SELPHY series printers. Please also
refer to the Personal Printing Guide.
Number of copies to print
Connect the camera to the printer
(p. 25).
Print.
● Press the op buttons, select [Print now]
and press the m button.
X Printing will start.
● If you stop the printer during printing and
start again, it will start from the next print.
98
8
Customizing the Camera
You can customize various functions to suit your shooting
preferences. The first part of this chapter explains convenient and
Y
P
O
commonly used functions. The latter part explains how to change
shooting and playback settings to suit your purposes.
C
99
Changing Functions
You can customize convenient and commonly used functions from the 3
tab (p. 44).
Turning Off the Start-up Image
You can turn off the start-up image that displays when you turn on the
camera.
● Select [Start-up Image], then press the qr
buttons to select [Off].
Y
P
O
Turning off the Power Saving Function
You can set the power saving function (p. 39) to [Off]. Setting it to [On] is
recommended to save battery power.
● Select [Power Saving], then press the m
C
button.
● Press the op buttons to select [Auto Power
Down], then use the qr buttons to select [Off].
● If you set the Power Saving function to [Off],
be careful not to forget to turn off the camera
after use.
Setting the Screen Shut-Off Time
You can adjust the time the screen takes to shut off automatically (p. 39).
This also works when [Auto Power Down] is set to [Off].
● Select [Power Saving], then press the m
button.
● Press the op buttons to select [Display Off],
then use the qr buttons to select a time.
● In order to save battery power, it is
recommended to select less than [1 min.].
100
Changing Functions
Changing the File Number Assignment
Images you shoot are automatically assigned file numbers in the order they
were taken, from 0001 – 9999, and saved to folders of up to 2,000 images.
You can change the file number assignment.
● Select [File Numbering], then press the qr
buttons to select an option.
Continuous
Even if you shoot using a new
memory card, the file numbers are
assigned consecutively until an
image with the number 9999 is taken/
saved.
If you replace the memory card with
a new one, file numbering begins
with 0001 again.
Y
P
O
Auto Reset
• If you use a memory card already containing images, the newly
assigned file numbers may continue the existing numbering for both the
[Continuous] and [Auto Reset] settings. If you want to start over with file
number 0001, format the memory card before use (p. 47).
• Refer to the Software Starter Guide for information regarding folder
structure or image types.
C
Creating a Folder
You can create new folders in which to save images.
● Select [Create Folder], then press the m
button.
● Select [Create New Folder], then press the
●
qr buttons to select
.
will display on the screen (p. 40) when
shooting, and shots will be recorded into a
new folder.
101
Changing Functions
Creating Folders by Day and Time
You can set a day and time for folder creation.
● Select [Create Folder], then press the m
button.
● Select [Auto Create], then press the qr
buttons to select an interval.
● Select [Time], then press the qr buttons to
set a time.
● The new folder will be created on the set day
and time. Images shot after the creation date
are saved to the new folder.
Y
P
O
Changing the Lens Retract Time
For safety reasons, the lens retracts about 1 minute after pressing the 1
button when in a shooting mode (p. 23). You can set the retraction time to
[0 sec.].
● Select [Lens Retract], then press the qr
C
buttons to select [0 sec.].
102
Changing Shooting Functions
You can set functions in the 4 tab after pressing the æ button and
using the qr buttons to select G (p. 44).
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 118 – 119).
Turning off the AF Assist Beam
If the camera cannot focus in low light conditions when you press the shutter
button halfway, the lamp will automatically light to assist focusing. You can
turn off the lamp.
● Select [AF-assist Beam], then press the qr
buttons to select [Off].
Y
P
O
Turning off the Red-Eye Reduction Function
C
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
● Select [Flash Settings], then press the m
button.
● Press the op buttons to select [Red-Eye
Lamp], then press the qr buttons to select
[Off].
103
Changing Shooting Functions
Changing the Image Display Right After Shooting
You can change the image display that appears after shooting.
● Select [Review Info], then press the qr
buttons to select an option.
Detailed
Focus Check
Displays detailed information (p. 41).
The area inside the AF frame is
magnified, allowing you to check the
focus. The procedure is the same as
in “Checking the Focus” (p. 89).
Displaying the Overlay
You can display gridlines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for L size or postcard size prints.
Y
P
O
● Select [Disp. Overlay], then press the qr
buttons to select an option.
Grid Lines
C
3:2 Guide
Both
A grid overlays the display.
Gray areas appear at the top and
bottom of the screen. These areas
will not print when printing on 3:2
aspect ratio paper.
Both grid lines, and the 3:2 guide will
display.
• In
mode, you cannot set [3:2 Guide] or [Both].
• Grid Lines will not be recorded on the image.
• The gray areas displayed with [3:2 Guide] are the areas that will not be
printed. The actual image recorded will include the portion in the gray
areas.
104
Changing Playback Functions
You can adjust the settings in the 1 tab by pressing the 1 button (p. 44).
Selecting the Image that First Displays in
Playback
● Select [Resume], then press the qr buttons
to select an option.
Last seen
Last shot
C
Resumes with the image last viewed.
Resumes with the most recently shot
image.
Y
P
O
105
C
106
Y
P
O
9
Useful Information
This chapter introduces date/time battery replacement, how to use the
AC adapter kit (sold separately), troubleshooting tips, and contains
Y
P
O
lists of available camera functions. The index also appears at the end.
C
107
Replacing the Date/Time Battery
The life of the date/time battery (back-up battery) is approximately 7 years. If
the Date/Time settings screen appears every time the camera is turned on,
replace the date/time battery with a new one (CR1220).
Turn off the camera.
Open the cover and remove the
AA batteries (p. 12).
Remove the date/time battery
holder.
Y
P
O
Replace the battery.
● Insert the battery with (+) and (-) sides
oriented correctly.
C
Insert the date/time battery holder.
Insert the batteries and close the
cover.
Turn on the camera’s power and
set the date/time (p. 16).
108
Using Household Power
If you use AC Adapter Kit ACK800 (sold separately), you can use the
camera without worrying about how much charge is left in the batteries.
Turn off the camera.
Plug the cord into the camera.
● Open the cover and fully insert the
adapter plug into the camera.
Connect the power cord.
Y
P
O
● Connect the power cord to the compact
C
power adapter, then plug the other end
into a power outlet.
● You can turn the camera on to use it.
● After you finish, turn off the camera and
unplug the power cord from the power
outlet.
Do not unplug the power cord or adapter plug with the camera turned on.
This could erase images you have taken or damage the camera.
109
Handling Precautions
Equipment
• This camera is a high-precision electronic device. Do not drop it or subject
it to strong impacts.
• Never place the camera close to magnets or motors that generate strong
electromagnetic fields. Exposure to strong magnetic fields may cause
malfunctions or corrupt image data.
• If water droplets have fallen or dirt is stuck on the camera or LCD monitor,
wipe with a dry soft cloth or eyeglass wiper. Do not rub or apply force.
• Never use cleaners containing organic solvents to wipe the camera or
LCD monitor.
• Use a commercially available blower brush to remove dust from the lens.
For stubborn dirt contact the closest Canon Customer Support Help Desk
as listed on the customer support leaflet supplied with your camera.
• When you move the camera rapidly from cold to hot temperatures,
condensation may form on the internal or external surfaces of the camera.
To avoid condensation, put the camera in an airtight, resealable plastic
bag and let it adjust to temperature changes slowly before removing it
from the bag.
• If condensation has formed, stop using the camera immediately.
Continued use may damage the camera. Remove the batteries and
memory card, and wait until the moisture has completely evaporated
before resuming use.
Memory Cards
C
Y
P
O
• A memory card is a high-precision electronic device. Do not bend, apply
force or subject it to strong impacts. Doing so may corrupt image data
recorded on the memory card.
• Do not spill liquids on the memory card. Do not touch the memory card’s
terminals with your hands or metallic objects.
• Do not store memory cards near a TV, speakers or other devices that
generate magnetic fields or static electricity. Doing so may corrupt image
data recorded on the memory card.
• Do not store memory cards in hot, humid or dusty locations.
110
Troubleshooting
If you think there is a problem with the camera, first check the following. If
the items below do not solve your problem, contact a Canon Customer
Support Help Desk as listed on the included customer support list.
Power
You pressed the power button, but nothing happened.
•
•
•
•
Confirm that the batteries are properly inserted (p. 12).
Confirm that the batteries are not depleted (p. 14).
Confirm that the memory card/battery cover is securely closed (p. 13).
If the battery terminals are dirty, battery performance will decrease. Clean the
terminals with a cotton swab and re-insert the batteries several times.
Batteries are consumed quickly.
• Battery performance decreases at low temperatures. Warm the batteries by, for
example, placing them in your pocket, taking care that the terminals do not
come into contact with any metal objects.
Lens will not retract.
Y
P
O
• Do not open the memory card/battery cover while the power is on. After closing
the memory card/battery cover, turn the power on then back off (p. 13).
TV output
Image is distorted or not showing on TV (p. 91).
Shooting
Cannot shoot.
C
• Press the shutter button halfway (p. 19) in playback mode (p. 23).
Screen does not display properly in dark places (p. 42).
Screen does not display properly while shooting.
Please note, the following will not be recorded in still images, but will be recorded
in movies.
• When the camera is subjected to powerful light sources, the display may
darken.
• Under fluorescent lighting, the screen may flicker.
• When shooting bright light sources, a bar of light (purplish red) may appear.
appears when the shutter button was pressed halfway (p. 53).
• Set the flash to h (p. 61).
• Increase the ISO speed (p. 67).
• Attach the camera to a tripod.
Image is blurred.
•
•
•
•
Press the shutter button halfway to focus, then shoot (p. 19).
Shoot the subject within the focusing distance (p. 122).
Set the [AF-assist beam] to [On] (p. 103).
Confirm that functions which you do not intend to use (macro, etc.) are not set.
111
Troubleshooting
• Shoot using the focus lock (p. 72).
Even when you press the shutter button halfway, the frame does
not appear, and the camera does not focus.
• If you center on the light and dark contrasting area of the subject and push the
shutter button halfway, or repeatedly push the shutter button halfway, the frame
will appear and the camera will focus.
Subject is too dark.
• Set the flash to h (p. 61).
• Adjust the brightness with exposure compensation (p. 66).
• Use the AE lock, or spot metering to shoot (p. 77).
Subject is too bright (overexposed).
•
•
•
•
Set the flash to ! (p. 53).
Adjust the brightness with exposure compensation (p. 66).
Use the AE lock, or spot metering to shoot (p. 77).
Reduce the light illuminating the subject.
Y
P
O
Image is dark even though the flash fired (p. 22).
• Increase the ISO speed (p. 67).
• Shoot within an appropriate distance for flash photography (p. 61).
Image taken using the flash is too bright (overexposed).
• Shoot within an appropriate distance for flash photography (p. 61).
• Set the flash to ! (p. 53).
C
White dots appear on the image when shooting with the flash.
• Light from the flash has reflected off dust particles or other objects in the air.
Image appears rough or grainy.
• Shoot with the ISO speed on a lower setting (p. 67).
• Depending on the shooting mode, when shooting in a high ISO speed the image
may appear rough or grainy (p. 52).
Eyes appear red (p. 79).
• Set the [Red-Eye Lamp] to [On] (p. 103). When shooting with the flash, the lamp
(on the front of the camera) lights (p. 38), and for approximately 1 second while
the camera is reducing red-eye, it is not possible to shoot. It is more effective if
the subject is looking directly at the lamp. Even better results can be obtained by
increasing the lighting in indoor settings or approaching closer to the subject.
Recording images to the memory card takes a long time, or
continuous shooting slows down.
• Format the memory card in the camera (p. 47).
When you can’t make settings for shooting functions or FUNC.
menu.
• The items in which settings can be made differ depending on the shooting
mode. Refer to “Functions Available in Each Shooting Mode” (pp. 116 – 117).
112
Troubleshooting
Shooting movies
Correct shooting time does not display, or stops.
• Format the memory card in the camera, or use a memory card capable of
recording at high speeds. Even when the shooting time does not display
properly, the video recorded will be the length that it was actually shot (p. 28).
“!” displayed on the LCD monitor, and shooting ended
automatically.
Camera’s internal memory was insufficient. Try one of the following.
• Format the memory card in the camera (p. 47).
• Lower the recorded pixels (p. 82).
• Use a memory card capable of recording at high speeds.
Zoom does not operate.
• You can use the digital zoom while recording, but not the optical zoom (p. 83).
Playback
Y
P
O
Cannot play back images or movies.
• If the file name or folder structure is changed on a computer, you may not be
able to play back images or movies. Refer to the Software Starter Guide for
information regarding folder structure or file names.
Playback stops, or audio cuts out.
C
• Use a card that has been formatted on this camera (p. 47).
• If you copy a movie to a memory card that reads slowly, playback may interrupt
momentarily.
• Depending on its capabilities, the computer may drop frames, or the audio may
cut out, when playing movies.
113
List of Messages that Appear on the Screen
If error messages appear on the LCD monitor, try one of the following
solutions.
No memory card
• The memory card is not installed in the correct direction. Install the memory card
in the correct direction (p. 12).
Card locked!
• The SD memory card or SDHC memory card’s write protect tab is set to “Lock”.
Unlock the write protect tab (p. 15).
Cannot record!
• You attempted to shoot an image without a memory card, or with a memory card
installed incorrectly. Install the memory card in the correct direction when
shooting (p. 12).
Memory card error (p. 48)
• If this error message appears even when using the supplied memory card,
contact your Canon Customer Support Help Desk as there may be a problem
with the camera.
Memory card full
Y
P
O
• There is not enough free space on the memory card to shoot (pp. 20, 49, 59, 73)
or edit images (pp. 94 – 95). Erase the images (pp. 24, 93) to open space for
new images, or insert an empty memory card (p. 12).
C
Change the batteries (p. 12)
No image.
• There are no images recorded on the memory that can be displayed.
Protected! (p. 92)
Unidentified Image/Incompatible JPEG/Image too large./RAW
• Unsupported images or data, or corrupted image data cannot be displayed.
• Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not display.
Cannot magnify!/Cannot rotate/Cannot modify image/Unselectable
image
• Incompatible images cannot be magnified (p. 90), rotated (p. 93), edited (pp. 94
– 95) or added to a print list (p. 96).
• Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not be magnified, rotated, edited
or added to a print list.
• Movies cannot be magnified (p. 90).
Too many marks.
• You selected more than 998 images to send in print settings. Select less than
998 images (p. 96).
114
List of Messages that Appear on the Screen
Cannot complete!
• Print settings or transfer settings could not be saved correctly. Reduce the
number of settings and try again (p. 96).
Naming error!
• The file name could not be created because there is an image with the same
name as the folder that the camera is attempting to create, or the highest
possible file number has already been reached (p. 101). In the 3 menu, change
[Image Number] to [Auto reset] (p. 101) or format the memory card (p. 47).
Communication error
• Images could not be transferred to the computer or printed due to the large
amount of images (approx. 1000) stored on the memory card. Use a
commercially available USB card reader to transfer the images to the computer.
To print, insert the card into the printer’s card slot.
Lens error, restart camera
Y
P
O
• A lens error was detected. Press the power button to turn the camera off and
back on (p. 38). If this error message continues to display, contact your Canon
Customer Support Help Desk as there may be a problem with the lens.
• This error can occur if you hold the lens while it is in motion or when using it in a
location with excessive dust or sand in the air.
Exx (xx: number)
• A camera error was detected. Press the power button to turn the camera off and
back on (p. 38).
• If an error code displays directly after taking a picture, the shot may not have
been recorded. Check image in playback mode.
• If this error code reappears, note the number and contact your Canon Customer
Support Help Desk as there may be a problem with the camera.
C
115
Functions Available in Each Shooting Mode
Shooting modes
Function
{
{
{
All Range
{
—
e
—
{
—
{
—
{
u
Flash (pp. 53, 61, 78)
AF Lock (p. 75)
AE Lock (pp. 77, 83)/FE Lock (p. 78)
C
AE Lock/Exposure Shift (p. 83)
TV Display (p. 70)
Screen Display (p. 40)
{
{
h
—
{
…
—
{
!
{
{
{
{
{
{
Y
P
O
Ò Î
$ *2
Self-Timer Mode (pp. 57, 70, 71)
G
—
ISO Speed (p. 67)
Focusing Zone (pp. 61, 63)
»
{
{
—
{
—
{
—
—
{
{
Information View
{
{
No Information
{
{
—
{
Function menu
Exposure Compensation (p. 66)
White Balance (p. 68)
My Colors (p. 69)
Metering System (p. 77)
W
Drive Mode (p. 66)
Image Quality (Compression Ratio) (p. 64)
Recording Pixels (pp. 64, 82)
‘
{
{
—
{
—
{
{
{
—
{
—
{
{
{
{
{
{
{
—
—
*1 … when flash fires. *2 Possible settings: 0 – 30 seconds in [Delay], and 1 – 10 shots in
[Shots]. *3
is not selectable.
116
Functions Available in Each Shooting Mode
K
I
F
V
’
U
t
≈
w
y
O
P
œ
E
{
{
{
{
{
{
—
{
{
{
{
{
{
—
—
—
—
—
—
{
—
—
—
—
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
{
—
{
—
—
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
—
{
—
—
{
{
{
{
{
—
{
—
{
*1
{
{
*1
—
—
{
—
{
{
—
{
*1
{
{
*1
—
*1
{
{
{
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
Y
P
O
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
—
—
—
{
—
—
—
—
{
{
—
—
—
—
—
—
{
—
—
—
—
{
{
C
—
{
—
—
—
—
{
{
—
—
—
—
—
—
{
—
—
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
Function menu
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
—
—
—
—
—
—
—
—
{
—
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
*3
—
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
—
—
—
—
—
—
—
—
—
—
{
{ Selectable or selected automatically — Not selectable
117
Menus
4 Shooting Menu
Shooting modes
»
G
Face AiAF
{
{
Center
—
{
Normal/Small
—
{
Standard/Off
{
{
Digital Tele-Converter (1.4x/2.3x)
{
{
AF-Point Zoom (p. 76)
On/Off
{
{
AF-assist Beam (p. 103)
On/Off
{
{
Function
AF Frame (p. 74)
AF Frame Size (p. 75)
Digital Zoom (p. 54)
Flash Settings (p. 79)
Red-Eye Corr.
On/Off
{
{
Red-Eye Lamp
On/Off
{
{
Y
P
O
Shooting Info (p. 40)
On/Off
{
{
Review (p. 48)
Off/2 – 10 sec./Hold
{
{
Review Info (p. 104)
Off/Detailed/Focus Check
{
{
Off/Grid Lines
{
{
{
{
Disp. Overlay (p. 104)
C
3:2 Guide/Both
*1 AiAF *2 Available when h is selected.
118
Menus
K
F
V
’
U
t
{
{
{
{
{
—
{
{
{
{
{
{
*1
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
—
{
{
*2
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
—
—
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
C
{
{
≈
w
y
O
Y
P
O
P
œ
E
I
—
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{ Selectable or selected automatically — Not selectable
119
Menus
3 Set up Menu
Item
Options/Summary
Mute
Volume
Start-up Image
On/Off*
Set all operation sounds (5 levels).
On*/Off
Format
File Numbering
Create Folder
Lens Retract
Formats card, erasing all data
Continuous*/Auto Reset
Create New Folder/Auto Create
1 min.*/0 sec.
Auto Power Down: On*/Off
Display Off: 10, 20 or 30 sec./1*, 2 or 3 min.
Date and time settings
NTSC/PAL
Select displayed language.
Returns camera to default settings.
Power Saving
Date/Time
Video System
Language
Reset All
* Default setting
1 Playback Menu
Item
Information Display
Slideshow
Red-Eye Correction
Resize
Protect
Rotate
Erase all
Resume
Transition
* Default setting
120
C
Y
P
O
Options/Summary
No Information Display*/Simple Information
Display/Detailed Information Display/Focus
Check Display
Plays back images and movies automatically.
Corrects red eyes in images.
Resizes and saves images.
Protects images and movies.
Rotates images and movies.
Erases all images and movies.
Last seen*/Last shot
/ */
Ref. Page
p. 45
p. 45
p. 100
p. 47
p. 101
pp. 101, 102
p. 102
pp. 39, 100
p. 17
p. 91
p. 18
p. 46
Ref. Page
p. 41
p. 88
p. 95
p. 94
p. 92
p. 93
p. 93
p. 105
p. 90
Menus
2 Print Menu
Item
Options/Summary
Ref. Page
Print
Select Images & Qty.
Select All Images
Displays printing screen.
Selects individual images for printing.
Selects all images for printing.
p. 25
p. 97
p. 98
Clear All Selections
Print Settings
Cancels all settings for printing.
Sets the printing style.
p. 98
p. 96
C
Y
P
O
121
Specifications
Camera Effective Pixels . . . . . . . . . . . . Approx. 10.0 million
Image Sensor . . . . . . . . . . . . . . . . . . . . 1/2.3-inch type CCD (Total number of pixels:
Approx. 10.3 million)
Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6 (W) – 21.6 (T) mm
35mm film equivalent: 37 (W) – 122 (T) mm
f/3.0 (W) – f/5.8 (T)
Digital Zoom . . . . . . . . . . . . . . . . . . . . . Approx. 4.0x (Up to approx. 13x in combination with
the optical zoom)
LCD Monitor . . . . . . . . . . . . . . . . . . . . . 2.5-inch type TFT LCD color monitor
Approx. 115,000 dots, picture coverage 100%
AF Frame Mode . . . . . . . . . . . . . . . . . . Face AiAF/Center
Focusing Range (from end of lens) . . . . Auto: 4 cm (1.6 in.) – infinity (W)/
25 cm (9.8 in.) – infinity (T)
Normal: 50 cm (1.6 ft.) – infinity
Macro: 3 – 50 cm (1.2 in. – 1.6 ft.) (W)/
25 – 50 cm (9.8 in. – 1.6 ft.) (T)
Infinity: 3 m (9.8 ft.) – infinity
Kids&Pets: 1 m (3.3 ft.) – infinity
Super Macro: 1 – 10 cm (0.39 – 3.9 in.)
Shutter. . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical shutter and electronic shutter
Shutter Speed . . . . . . . . . . . . . . . . . . . . 1/60– 1/2000 sec.
15 – 1/2000 sec. (Total shutter speed range)
Metering Type . . . . . . . . . . . . . . . . . . . . Evaluative, Center-weighted average or Spot
Exposure Compensation . . . . . . . . . . . . ±2 stops in 1/3-stop increments
ISO speed
(Standard Output Sensitivity,
Recommended Exposure Index). . . . . . Auto, ISO 80/100/200/400/800/1600
White Balance . . . . . . . . . . . . . . . . . . . . Auto, Day Light, Cloudy, Tungsten, Fluorescent,
Fluorescent H, Custom
Built-in Flash . . . . . . . . . . . . . . . . . . . . . Auto, On, Slow Synchro, Off
* Red-eye reduction/Red-eye correction/FE Lock
settings available
Built-in Flash Range . . . . . . . . . . . . . . . 30 cm – 3.0 m (12 in. – 9.8 ft.) (W)/
30 cm – 2.0 m (12 in. – 6.6 ft.) (T)
Shooting Modes . . . . . . . . . . . . . . . . . . Auto, Program AE, Special scene mode*, Movie
* Portrait, Night Snapshot, Kids&Pets, Indoor, Sunset,
Fireworks, Long Shutter, Beach, Aquarium, Foliage,
Snow, Super Macro
Continuous Shooting . . . . . . . . . . . . . . . Approx. 0.8 images/sec.
Self-timer . . . . . . . . . . . . . . . . . . . . . . . . Approx. 10-sec./Approx. 2-sec. delay, Custom Timer
Recording Media . . . . . . . . . . . . . . . . . . SD memory card, SDHC memory card,
MultiMediaCard, MMCplus memory card,
HC MMCplus memory card
File Format . . . . . . . . . . . . . . . . . . . . . . Design rule for camera file system and DPOF
compliant
Data Type . . . . . . . . . . . . . . . . . . . . . . . Still images: Exif 2.2 (JPEG)
Movies: AVI (Image data: Motion JPEG, Audio data:
WAVE (Mono))
Compression . . . . . . . . . . . . . . . . . . . . . Fine, Normal
C
122
Y
P
O
Specifications
Number of Recording Pixels
(Still images). . . . . . . . . . . . . . . . . . . . . . Large: 3648 x 2736 pixels
Medium 1: 2816 x 2112 pixels
Medium 2: 2272 x 1704 pixels
Medium 3: 1600 x 1200 pixels
Small: 640 x 480 pixels
Date Stamp: 1600 x 1200 pixels
Widescreen: 3648 x 2048 pixels
(Movies) . . . . . . . . . . . . . . . . . . . . . . . . . 640 x 480 pixels (30 frames/sec.)
640 x 480 pixels (30 frames/sec. LP)
320 x 240 pixels (30 frames/sec.)
Number of Possible Shots . . . . . . . . . . . Approx. 200 images (Based on CIPA standardized
measurement)
Playback Function . . . . . . . . . . . . . . . . . Single Image, Movie, Index, Jump, Magnified Focus,
Magnified, Slideshow
Editing Function . . . . . . . . . . . . . . . . . . . Erase, Protect, Rotate, Resize, Red-Eye Correction
Direct Print Type. . . . . . . . . . . . . . . . . . . PictBridge capable
Interface . . . . . . . . . . . . . . . . . . . . . . . . . Hi-Speed USB (Dedicated connector (female) with
unified type of digital, audio and video*)
* mini-B compatible
Video/Audio output (NTSC and PAL capable, mono
audio)
Communication Settings. . . . . . . . . . . . . MTP, PTP
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 AA-size alkaline batteries
2 AA-size NiMH batteries (NB-3AH sold separately)
Operating Temperatures . . . . . . . . . . . . 0 – 40 °C (32 – 104 °F)
Operating Humidity. . . . . . . . . . . . . . . . . 10 – 90%
Dimensions (excluding protrusions) . . . . 92.1 x 62.0 x 31.1 mm (3.63 x 2.44 x 1.22 in.)
Weight (camera body only). . . . . . . . . . . Approx. 140 g (4.94 oz.)
C
Y
P
O
• All data is based on tests by Canon.
• The finished product, or exterior may differ from this report.
123
Index
Numerics
E
3.5" x 5" Size ............................................ 65
3:2 Guide ................................................ 104
Editing
Red-Eye Correction .............................. 95
Resizing (Making Images Smaller) ....... 94
Rotating Images .................................... 93
Enlarged Display ...................................... 90
Equipment
Default Settings ..................................... 46
Holding the Camera .............................. 11
Erasing All Images ................................... 93
Erasing Images ........................................ 24
Error Messages ...................................... 114
Exposure
AE Lock ........................................... 77, 83
Correction ............................................. 66
FE Lock ................................................. 78
A
AC Adapter Kit .................................. 36, 109
Accessories .............................................. 34
AE Lock .............................................. 77, 83
AF J Auto Focus
AF Frame ................................................. 21
AF Lock .................................................... 75
Aquarium (Scene Mode) .......................... 51
AV Cable .............................................. 2, 91
B
Y
P
O
Battery
Battery and Charger Kit .................. 34, 36
Charge Indicator ................................... 14
Date/Time Battery ......................... 17, 108
Power Saving ........................................ 39
Beach (Scene Mode) ................................ 51
Black and White Images ........................... 69
C
C
Camera Shake ......................................... 53
Components Guide .................................. 38
Compression J Image Quality
Continuous Shooting ................................ 66
D
Date and Time
Adding to Image .................................... 56
Changing ............................................... 17
Date/Time Battery ......................... 17, 108
Settings ................................................. 16
Date/Time J Date and Time
Default Settings ........................................ 46
Deleting J Erasing
DIGITAL CAMERA Solution Disk ......... 2, 31
Digital Tele-Converter .............................. 55
Digital Zoom ............................................. 54
Display Language ..................................... 18
Display Overlay ...................................... 104
DPOF ....................................................... 96
124
F
Face AiAF ................................................. 74
Factory Settings J Default Settings
FE Lock .................................................... 78
File Number ............................................ 101
Fireworks (Scene Mode) .......................... 51
Flash
Off ......................................................... 53
On ......................................................... 61
Slow Synchro ........................................ 78
Supplementary Flash ............................ 36
Focus
AF Frame .............................................. 21
AF Frame Mode .................................... 74
AF Lock ................................................. 75
AF-Point Zoom ...................................... 76
Focus Check ............................................ 89
Focus Lock ............................................... 72
Format J Memory Card, Formatting
Formatting (Memory Card) ....................... 47
FUNC. Menu
Basic Operations ................................... 43
List ...................................................... 116
G
Green Leaves/Autumn Foliage
(Scene Mode) ........................................... 52
Index
Grid Lines ............................................... 104
H
High-Power Flash ..................................... 36
Histogram ................................................. 42
Household Power ................................... 109
I
Image Quality (Compression Ratio) ......... 64
Images
Display Time ......................................... 48
Editing J Editing
Erasing Images ..................................... 24
Playback J View
Protect ................................................... 92
Indicator .............................................. 38, 39
Indoor (Scene Mode) ................................ 51
Infinity ....................................................... 63
Interface Cable ............................... 2, 25, 31
ISO Speed ................................................ 67
K
C
N
Night Snapshot (Scene Mode) .................50
Number of Shots .......................................14
P
Package Contents J Accessories
Personal Printing Guide .............................. 2
PictBridge .................................................25
Playback J View
Playback Button ........................................23
Playback With Transition Effects ..............90
Portrait (Scene Mode) ..............................50
Postcard Size ...........................................65
Power Button ............................................38
Power Saving ...........................................39
Print Settings (DPOF) ...............................96
Printer .................................................25, 26
Printing .....................................................25
Program AE ..............................................60
Y
P
O
Kids&Pets (Scene Mode) ......................... 50
L
Viewing (Playback) ................................29
MultiMediaCard J Memory Cards
My Colors .................................................69
Lamp ........................................... 38, 57, 103
LCD monitor J Screen
Long Exposures ........................................ 80
Long Shutter Mode (Scene Mode) ........... 80
M
Memory Cards .......................................... 15
Available Shots ............................... 15, 65
Formatting ............................................. 47
Menu
Basic Operations ................................... 44
List ............................................ 118 – 121
Metering Mode .......................................... 77
MMCplus/HC MMCplus Memory Card J
Memory Cards
Mode Button ............................................. 38
Movies
Image Quality (Frame Rate) .................. 82
Recording Pixels ................................... 82
Shooting Time ................................. 28, 82
R
Recording Pixels (Image Size) .................64
Red-Eye
Auto Correction .....................................79
Correction ..............................................95
Reduction ............................................103
Resizing (Making Images Smaller) ...........94
Rotating Images .......................................93
S
SCN (Scene Mode) ..................................50
Screen
Display Language .................................18
Information Displayed .....................40, 41
Menu Operations ............................. 43, 44
Switching the Display ...................... 40, 41
SD/SDHC Memory Card J Memory Cards
Self-Timer
10 second Self-Timer ............................57
Changing Delay and
Number of Shots ...................................71
125
Index
Two Second Self-Timer ........................ 70
Sepia Tones ............................................. 69
Shooting Date and Time J Date/Time
Shooting Using a TV ................................ 70
Shooting With Macro ................................ 61
Shutter Button .......................................... 19
Slideshow ................................................. 88
Snow (Scene Mode) ................................. 52
Software
DIGITAL CAMERA Solution Disk ...... 2, 31
Software Starter Guide ........................... 2
Transferring Images to a Computer ...... 30
Sound ....................................................... 45
Strap ..................................................... 2, 11
Sunset (Scene Mode) ............................... 51
Super Macro (Scene Mode) ..................... 62
Supplementary Flash ............................... 36
T
Y
P
O
Terminal ....................................... 25, 32, 91
Tone (White Balance) ............................... 68
Troubleshooting ...................................... 111
V
C
Video J Movies
Viewing (Playback)
Enlarged Display ................................... 90
Index Display ........................................ 86
Single Image Playback ......................... 23
Slideshow .............................................. 88
Viewing Images on a TV ....................... 91
Viewing Images on a TV .......................... 91
W
White Balance .......................................... 68
Wide (Recording Pixels) ..................... 64, 65
Wrist Strap J Strap
Z
Zoom ............................................ 20, 27, 54
126
MEMO
C
Y
P
O
127
Trademark Acknowledgments
• The SDHC logo is a trademark.
Disclaimer
• Reprinting, transmitting, or storing in a retrieval system any part of this
guide without the permission of Canon is prohibited.
• Canon reserves the right to change the contents of this guide at any
time without prior notice.
• Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
• Every effort has been made to ensure that the information contained in
this guide is accurate and complete. However, if you notice any errors
or omissions, please contact the Canon customer service center
indicated on the customer support list included with the product.
• The above items notwithstanding, Canon accepts no liability for
damages due to mistaken operation of the products.
C
CDP-E070-010
Y
P
O
© CANON INC. 2009
Download PDF

advertising