Miller Big Blue 502 Specifications

Big Blue 302/402/502
Issued February 2003 • Index No. ED/10.8
®
Quick
Specs
Engine-Driven
Welder/Generator
Heavy Industrial Applications Processes
Output Range
Heavy Construction
Structural Steel
Maintenance and Repair Rigs
Mining Maintenance
Process Piping
Sheet Metal
302: DC Stick 45–500 A
MIG/FCAW 14–40 V
402/502: DC Stick 55–600 A MIG/FCAW 14–40 V
Stick (SMAW)
MIG (GMAW)
Flux Cored (FCAW)
DC TIG (GTAW)
Submerged Arc (SAW)
Stud Welding
Air Carbon Arc (CAC-A)
302: 5/16 in (8 mm) Carbons
402/502: 3/8 in (9.5 mm) Carbons
Air Plasma Cutting
with Optional Spectrum Models
Weld Output Rated at 104°F (40°C)
302: 300 A, 40 V, 12 kW, 100% Duty Cycle
402: 400 A, 40 V, 16 kW, 100% Duty Cycle
502: 500 A, 40 V, 20 kW, 100% Duty Cycle
Generator Output Rated at 104°F (40°C)
5,500 Watts Peak — 4,000 Watts Continuous
302: 15,000 Watts 3-Phase/12,000 Watts 1-Phase*
402/502: 20,000 Watts 3-Phase/12,000 Watts 1-Phase*
*Deluxe models only.
The Power of Blue .
®
Heavy duty industrial engine choices
designed, built and proven to operate over
10,000 hours before the first basic overhaul.
Designed for fleet owners that
demand the ultimate in reliability
and performance.
Arc-Drive makes welding easy.
Automatically enhances Stick
welding, especially on pipe, by
focusing the arc and preventing
the electrode from going out.
NEW! Factory standard features
on select models:
Automatic idle reduces fuel
consumption and noise level along
with prolonging the engine life.
Hot Start™ provides positive Stick
electrode starts making it easy to
start all types of electrodes and it
also works great for bead tie-ins.
Engine gauges indicate engine oil
pressure, coolant temperature and
battery charging voltage.
Weatherproof Lexan® nameplate
resists cracking and fading, and is
color-coded for ease of operation.
Enclosed robust case design
protects internal components
from impact and allows air flow
to cool and prolong the life of the
engine. Also reduces sound levels.
GFCI receptacle as required on
most job sites to protect
operators from electrical hazards.
Quick and easy maintenance
with single-side access to oil
level check, oil fill, oil filter, fuel
filter and air cleaner.
CSA, IEC and NEMA compliant
for welders. Degree of protection
provided by enclosure IP23.
Remote toolless oil drain allows
oil to be drained without getting
under the engine and reduces the
chance of oil spillage.
Big Blue 302 CC/CV Deluxe Model
Distributed By:
www.onesourcerental.com
Welder/generator is warranted by Miller for 3 years, parts and labor.
Engine is warranted separately by engine manufacturer.
Miller Electric Mfg. Co.
International Headquarters
Web Site
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
www.MillerWelds.com
Big Blue 302/402/502 CC Specifications
Welding
Mode
Weld
Output
Range
CC/DC
45 – 500 A
300 A at 40 V (12 kW),*
100% Duty Cycle
Big Blue
402 CC
55 – 600 A
400 A at 40 V (16 kW),*
100% Duty Cycle
Big Blue
502 CC
55 – 600 A
500 A at 40 V (20 kW),
100% Duty Cycle
Model
Big Blue
302 CC
Weld Output Rated at
104˚ F (40˚ C)
(Subject to change without notice.)
Max. OpenCircuit
Voltage
Generator Output
Rated at 104˚ F (40˚ C)
Peak: 5500 watts
Continuous: 4000 watts,
34/17 A, 120/240 VAC
95
Dimensions**
H: 43 in
(1092 mm)
W: 28-1/2 in
(724 mm)
D: 64-7/16 in
(1637 mm)
Weight
Without Fuel***
Perkins: 1545 lb (701 kg)
Deutz: 1655 lb (751 kg)
Perkins: 1695 lb (769 kg)
Deutz: 1695 lb (769 kg)
Deutz: 1785 lb (810 kg)
*Exceeds NEMA EW1 (ANSI C87.1) Class (1) output ratings. **Additional 7 in (178 mm) to top of exhaust. ***Additional 190 lb (86 kg) when fuel tank is full.
CSA certification by Canadian Standards Association.
Big Blue 302/402/502 CC Control Panel
9
10
11
12
1
2
13
14
15
16
3
4
17
18
5
19
6
20
20A
7
8
21
1. DC Ammeter*
2. DC Voltmeter*
3. Amperage Adjust Control
4. Amperage Range Switch
5. Amperage Adjust Switch and
Remote Amperage Adjust Receptacle
6. Stick/TIG Selector Switch
7. 120 VAC, 20 A GFCI
Duplex Receptacle
8. 240 VAC, 30 A TwistLock Receptacle
(NEMA L6-30)
9. Engine Temperature Light
10. Engine Oil Pressure Light
11. Fuel Light
12. Battery Charging Light
13. Engine Oil Pressure Gauge*
14. Fuel Gauge
15. Engine Coolant Temperature Gauge*
16. Engine Hour Meter
17. Battery Voltmeter*
18. Starting Aid Switch
19. Magnetic Shutdown Switch
20. Engine Control Switch
21. Polarity Switch*
*Optional on select models.
Additional Features
Proven, rugged rheostat
control technology that has
been in Miller engine drives for
over 60 years. Contains no
printed control boards.
2
A Stick/TIG switch optimizes
open-circuit voltage for Stick
welding and allows the opencircuit voltage to be lowered
for scratch start TIG welding.
Provisions are provided to plug
a RHC3GD34A remote control
that will allow precise adjustment of amperage without
walking back to the machine.
Distributed By:
www.onesourcerental.com
Big Blue 302/402/502 CC/CV Specifications
Model
Welding
Mode
Weld
Output
Range
Weld Output Rated at
104˚ F (40˚ C)
Big Blue
302 CC/CV
CC/DC
CV/DC
20 – 550 A
14 – 40 V
300 A at 40 V (12 kW),*
100% Duty Cycle
Big Blue
402 CC/CV
20 – 600 A
14 – 40 V
400 A at 40 V (16 kW),*
100% Duty Cycle
Big Blue
502 CC/CV
20 – 600 A
14 – 40 V
500 A at 40 V (20 kW),
100% Duty Cycle
Max. OpenCircuit
Voltage
95
(Subject to change without notice.)
Generator Output
Rated at 104˚ F (40˚ C)
Dimensions**
Peak: 5500 watts
Continuous: 4000 watts,
34/17 A, 120/240 VAC
Deluxe Model Generator Power
Single-Phase: 12,000 watts,
50 A, 120/240 VAC, 60 Hz; or
Three-Phase: (302) 15,000 watts,
36 A, 240 VAC, 60 Hz;
(402/502) 20,000 watts, 48 A,
240 VAC, 60 Hz while not welding
H: 43 in
(1092 mm)
W: 28-1/2 in
(724 mm)
D: 64-7/16 in
(1637 mm)
Weight
Without Fuel***
Perkins: 1545 lb (701 kg)
Deutz: 1655 lb (751 kg)
Perkins: 1695 lb (769 kg)
Deutz: 1695 lb (769 kg)
Deutz: 1785 lb (810 kg)
*Exceeds NEMA EW1 (ANSI C87.1) Class (1) output ratings. **Additional 7 in (178 mm) to top of exhaust. ***Additional 190 lb (86 kg) when fuel tank is full.
CSA certification by Canadian Standards Association.
Big Blue 302/402/502 CC/CV Control Panel
9
10
11
Distributed By:
1
www.onesourcerental.com
12
2
3
4
13
14
15
16
17
18
5
19
20
6
21
22
23
24
20A
7
8
25
Additional Features
One MIG welding range allows
precise voltage control for
welding with .023 –.120 in
(0.6 – 3.2 mm) wires.
A multi-colored process
selector control allows quick
and easy process changes
without having to use
multiple switches.
Solid-state control provides
enhanced arc characteristics
that include more dig in the
Stick mode with smoother and
lower amperage in the TIG
mode. Extreme conditions will
not cause the output to change,
eliminating the need to
periodically turn the heat up.
The rugged solid-state control
board is housed in a sealed
vault. The vault’s sealed
connections are made through
watertight plugs that make this
component impenetrable to
dust and moisture.
14-pin remote control allows
precise adjustment of
amperage or voltage, along
with contactor control, without
walking back to the machine.
1. DC Ammeter*
2. DC Voltmeter*
3. Amperage/Voltage Adjust Control
4. Amperage Range Switch
5. Amperage/Voltage Adjust Switch
and Remote Amperage/Voltage
Adjust Receptacle
6. Process/Contactor Selector Switch
7. 120 VAC, 20 A GFCI
Duplex Receptacle
8. 240 VAC, 30 A TwistLock Receptacle
(NEMA L6-30)
9. Engine Temperature Light
10. Engine Oil Pressure Light
11. Fuel Light
12. Battery Charging Light
13. Engine Oil Pressure Gauge*
14. Fuel Gauge
15. Engine Coolant Temperature Gauge*
16. Engine Hour Meter
17. Battery Voltmeter*
18. Starting Aid Switch
19. Magnetic Shutdown Switch
20. Engine Control Switch
21. 3-Phase Power Generator Option*
22. Strain Relief*
23. 50 A, 3-Phase Circuit Breaker
24. 50 A, 120/240 V Receptacle
(NEMA 14-50)*
25. Polarity Switch*
*Optional on select models.
3
Big Blue 302/402/502 CC Performance Data
302 CC
VOLT/AMP CURVES – STICK MODE
402/502 CC
VOLT/AMP CURVES – STICK MODE
100
150 300
Ranges
Ranges
80
60
DC VOLTS
210 – Max
165 – 350
100 – 250
65 – 120
45 – 85
40
60
40
20
20
0
0
0
100
200
300
400
500
600
125 250
300 – Max
185 – 425
125 – 320
85 – 190
55 – 90
AC VOLTS
80
DC VOLTS
GENERATOR POWER CURVE
100
75 150
50 100
25 50
0
700
100 200
100 200 300 400 500 600 700 800 900
DC AMPERES
0
0
0
0
FUEL CONSUMPTION CURVE
15
20
25
30
10
20
30
40
50
60
1000
800
WELD AMPERES
1.75
US GAL/HR.
10
AC AMPERES IN 120 V MODE
DUTY CYCLE CURVE
2.00
1.50
1.25
1.00
402/502
1800 RPM
0.75
302
0.50
402/502 IDLE
302 IDLE
0.25
0.00
5
AC AMPERES IN 240 V MODE
DC AMPERES
0
600
500
400
502
150
100
10
50 100 150 200 250 300 350 400 450 500
402
302
300
250
200
DC WELD AMPERES AT 100% DUTY CYCLE
15
20
25 30
40 50 60
80 100
% DUTY CYCLE
Big Blue 302/402/502 CC/CV Performance Data
302 CC/CV
VOLT/AMP CURVES – STICK MODE
402/502 CC/CV
VOLT/AMP CURVES – STICK MODE
100
100
300
Ranges
40
60
40
20
20
0
0
0
100 200 300 400
300 – Max
185 – 425
125 – 320
85 – 190
55 – 90
80
DC VOLTS
80
DC VOLTS
100
60
0
36 48
MAX
MAX
20
MIN
0
100 200 300 400 500 600 700 800 900 1000
0
100 200 300 400 500 600 700 800 900 1000
DC AMPERES
DC AMPERES
302 CC/CV
VOLT/AMP CURVES – TIG MODE
402/502 CC/CV
VOLT/AMP CURVES – TIG MODE
100
150
200
DUTY CYCLE CURVE
1000
800
40
MIN
100
AC AMPERES
60
0
600
500
400
502
302
402
300
250
200
150
100
10
15
20 25 30
40 50 60
80 100
% DUTY CYCLE
100
Ranges
50 – 335
40 – 240
25 – 150
15 – 75
60
40
Ranges
80
DC VOLTS
80
DC VOLTS
100
402/502 CC/CV
VOLT/AMP CURVES – MIG MODE
100
0
150
DC AMPERES
302 CC/CV
VOLT/AMP CURVES – MIG MODE
20
200
0
100 200 300 400 500 600 700 800 900
DC AMPERES
40
15 kW
50
0
500 600 700 800 900
20 kW Deluxe Model
250
WELD AMPERES
60
80
AC VOLTS
Max
150 – 420
110 – 315
75 – 200
40 – 90
Ranges
DC VOLTS
DC VOLTS
80
20
0
DC AMPERES
Distributed By:
40
0
50 100 150 200 250 300 350 400 450 500
60 – 310
40 – 200
30 – 130
20 – 70
60
20
0
4
3-PHASE GENERATOR
POWER CURVE
www.onesourcerental.com
0
50 100 150 200 250 300 350 400 450 500
DC AMPERES
Engine Specifications
Model
Big
Blue
302
Big
Blue
402
Big
Blue
502
Engine
Brand
(Subject to change without notice.)
Engine
Speeds
(RPM)
Automatic
Engine
Shutdowns
Features
HP
Type
Perkins
104.22
EPA-certified, indirect-injected, liquid-cooled engine with full
load sound levels of 75 dB @ 7 m (100 Lwa). Right-side service
access with service intervals of 250 hours for oil and filters.
33
4-cylinder,
industrial, liquidcooled diesel
Weld: 1800
Idle: 1235
Fuel: 25 gal (95 L)
Oil: 9 qt (8.5 L)
Coolant: 9 qt (8.5 L)
Oil pressure,
coolant temp
Deutz
F3L1011
EPA-certified, direct-injected, air/oil-cooled engine with full
load sound levels of 76.8 dB @ 7 m (101.7 Lwa). Right-side
service access with service intervals of 1000 hours for oil and
filters. Approved underground operation with the purchase of
a MSHA (30 CFR part 7) certificate.
30
3-cylinder,
industrial,
air/oil-cooled
diesel
Weld: 1800
Idle: 1235
Fuel: 25 gal (95 L)
Oil: 6.2 qt (5.9 L)
Coolant: Integrated
oil and water
Oil pressure,
oil temperature
Perkins
3.1524
Direct-injected, liquid-cooled engine with full load sound
levels of 80 dB @ 7 m (105 Lwa). Left-side service access
with service intervals of 400 hours for oil and filters.
45
3-cylinder,
industrial, liquidcooled diesel
Weld: 1800
Idle: 1500
Fuel: 25 gal (95 L)
Oil: 6.5 qt (6.2 L)
Coolant: 9 qt (8.5 L)
Oil pressure,
coolant temp,
low fuel
Deutz
F4L1011
EPA-certified, direct-injected, air/oil-cooled engine with full
load sound levels of 76 dB @ 7 m (101 Lwa). Right-side
service access with service intervals of 1000 hours for oil and
filters. Approved underground operation with the purchase of
a MSHA (30 CFR part 7) certificate.
44
4-cylinder,
industrial,
air/oil-cooled
diesel
Weld: 1800
Idle: 1235
Fuel: 25 gal (95 L)
Oil: 9 qt (8.5 L)
Coolant: Integrated
oil and water
Oil pressure,
oil temperature
Deutz
F3L912
The legendary EPA-certified, direct-injected, air-cooled engine
with full load sound levels of 81 dB @ 7 m (106 Lwa).
Right-side service access with service intervals of 500 hours
for oil and filters.
42
3-cylinder,
industrial,
air-cooled diesel
Weld: 1800
Idle: N/A
Fuel: 25 gal (95 L)
Oil: 9 qt (8.5 L)
Coolant: Air
Oil pressure,
oil temperature
Capacities
Genuine Miller Options
Engine Gauge Kit
#194 700 Field
Deutz F3L912
Monitors critical engine operating
parameters. Consists of individual battery
voltmeter, coolant temperature and oil
pressure gauges.
Cold Weather Starting Aid Kit
Note: Perkins 3.1524 models come standard with
thermostart. Installation time: 35 minutes. Perkins
104.22 models come standard with glow plugs.
Installation time: 35 minutes
Weld Ammeter and Voltmeter Kit
#043 941 Field
Panel-mounted analog meters monitor
welding output.
20A
Installation time: 35 minutes
Polarity Reversing Switch Kit
#043 942 Field
Changes DC polarity without the use of tools.
Installation time: 35 minutes
Distributed By:
#195 056 Field
Perkins 104.22. 120 volt block heater.
#043 959 Field
Deutz F3L1011 / F4L1011. 12 volt intake
manifold heater.
#195 983 Field
Perkins 3.1524. 120 volt block heater.
#196 015 Field
Deutz F3L912. 12 volt ether start system.
Ether tank is not provided.
3-Phase Power Generator Factory
(Deluxe CC/CV model only)
For Big Blue 302 CC/CV. 15,000 watts.
For Big Blue 402/502 CC/CV. 20,000 watts.
Adds three-phase, 240 V power to CC/CV
units. 12 kW, 120/240 V single-phase
power from a 50 amp receptacle. Optimum
kW performance achieved while not welding.
This option also includes a 50 amp on/off
circuit breaker for both single- and threephase power, and a strain relief for hard
wiring into the unit.
Note: Available as factory option. See Ordering
Information on back page.
www.onesourcerental.com
5
Genuine Miller Accessories
Remote Controls (CC model only)
RHC-3GD34A Remote Hand Control
#041 122
Allows for precise adjustment of amperage.
Includes 20 ft (6 m) cord.
Stick (SMAW) Welding
RMLS-14 #129 337
Fingertip momentary- and maintainedcontact rocker switch for contactor control.
Push forward for maintained contact and
back for momentary contact. Includes 20 ft
(6 m) cord and 14-pin plug.
Extension Cords for 14-Pin Remote Controls
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.9 m)
Remote Controls (CC/CV models)
TIG (GTAW) Welding
RHC-14 Hand Control #129 340
Miniature hand control for remote current
and contactor control. Dimensions: 4 x 4 x
3-1/4 in (102 x 102 x 82 mm). Includes
20 ft (6 m) cord and 14-pin plug.
HF-251 Series
#042 388
HF-251D-1,
115 VAC
#042 387
HF-251D-2,
230 VAC
High-frequency arc
starter and stabilizer. See Accessory Lit.
Index No. AY/5.0.
MIG (GMAW)/Flux Cored (FCAW)
Welding
RCCS-14 Remote Contactor and Current
Control #043 688
Up-and-down rotary-motion fingertip
control fastens to TIG torch using two
Velcro® straps. Includes 28 ft (8.5 m)
control cord.
RFCS-14 HD Foot Control #194 744
Foot pedal provides remote current and
contactor control. Includes 20 ft (6 m) cord
and 14-pin plug.
SuitCase™ 8VS #194 890
SuitCase™ 12VS #194 941
Lightweight, portable wire feeder for a
variety of wires up to .062 in (8VS) or
5/64 in (12VS). Holds up to an 8 in (8VS)
or 12 in (12VS) spool of wire. Includes
secondary contactor and gas valve.
Requires drive roll kit. See Lit. Index
No. M/6.4.
Distributed By:
6
www.onesourcerental.com
No. 2/0 Stick Welding Accessory Kits
#173 851
50 ft (15 m) No. 2/0 electrode cable with
electrode holder and 50 ft (15 m) No. 2/0
work cable with work clamp. 350 A at
100% duty cycle.
#043 952
100 ft (30.5 m) No. 2/0 electrode cable with
electrode holder and 50 ft (15 m) No. 2/0
work cable with work clamp. 300 A at
100% duty cycle.
Lockable Fuel Cap
Flame Arrestor Kit
Green
#043 947 Field
Fuel cap can be
padlocked to prevent
vandalism. A built-in
flame arrestor prevents
flames or sparks from
entering the fuel tank.
Spark Arrestor
Muffler Kit
#041 928 Field
Prevents particles from
leaving the muffler that
could potentially start a
fire. Mandatory
when operating on
California grasslands,
brush, or forest-covered land, and in all
National Forests. For other areas, check
your state and local laws. Meets US Forest
Service standard 5100-1B.
Vandalism
Lockout Kit
#195 118 Field
Lockable hinged
steel panels
cover and
protect name
plate gauges
and ignition
switch (padlock
included). Also includes engine compartment
door lock and key.
Genuine Miller Accessories
Cable Holder
#043 946
Saddle-bag-style cable
holder. Convenient
wrap-around storage
of coiled cable for
transportation. Stores
100 ft of 2/0 cable on
each side.
Note: For best results do not weld when cable is coiled!
Canvas cover cannot be used with cable holder.
Trailers and Hitches
Roll Cage/Drip Pan
#194 918 Field
Heavy-duty
galvanized steel
structure designed
to protect the
machine. The
roll cage meets
offshore oil platform requirements with
a drip pan and drain plug along with a
heavy-duty lift eye.
Canvas Cover
(Blue)
#194 683 Field
Attractive,
waterproof
canvas cover
resists stains
and mildew,
and protects the finish of your welder.
Note: Canvas cover cannot be used with cable holder.
(For both models.)
RCT-224 Trailer
#194 875
A highway trailer
specifically
designed for the
rental/construction
site. A heavy-duty
torsion axle with a low center of gravity
provides a rugged yet smooth ride. The
RCT-224 comes with jack stand, 2-1/2 in
lunette eye, fenders, lights and safety chains.
Ball Hitch 2 in (50 mm) #189 585
For use with the RCT-224 trailer.
4 West Four-Wheel Steerable Off-Road
Trailer #042 801
A heavy-duty 2570 lb (1166 kg) capacity
trailer designed for use in mines, quarries,
and other rough terrain. Has narrow 22 ft
(6.7 m) turning radius. Includes 3 in lunette
eye, universal hitch and safety chains.
Note: Trailers are shipped unassembled.
Trailer Specifications
(Continued)
HWY-224 Trailer #043 805
A 2650 lb (1202 kg) capacity highway
trailer. Welded steel tubing frame, heavyduty axle with roller bearing hubs and
leaf-spring suspension. The HWY-224
comes with jack stand, 2 in (50 mm)
ball hitch, fenders and lights.
OFR-224 Trailer #043 802
A 2650 lb (1202 kg) capacity off road trailer.
Welded steel tubing frame, heavy-duty axle
with roller bearing hubs and leaf spring
suspension. The OFR-224 comes with jack
stand and 2 in (50 mm) ball hitch.
Lunette Eye 2-1/2 in (64 mm) #043 824
For use with both 224 trailers.
HWY-430 Tandem Axle Trailer #043 806
Smooth riding with 3750 lb (1701 kg)
capacity. Includes: adjustable hitch for
level operation, a hand operated parking
brake, a self-actuating hydraulic brake
system and a break-away device to lock
brakes if the trailer comes loose. It also
includes jack stand, fenders and lights.
(Hitch must be ordered separately.)
Ball Hitch 2 in (50 mm) #043 864
For use with the 430 trailer.
Lunette Eye 3 in (76 mm) #043 863
For use with the 430 trailer.
Cable Tree #043 826
Provides an area to conveniently wrap weld
cables and extension cords. Works on all
224 and 430 trailers.
www.onesourcerental.com
(Subject to change without notice.)
Gross Axle
Gross Vehicle
Weight Rating Weight Rating
Net
Payload
Height
of Bed
Road
Clearance
Track (Center
to center of
tires)
Standard Tires
(Standard rating
or P-size rating)
RCT-224
2700 lb
(1225 kg)
2500 lb
(1134 kg)
2250 lb
(1021 kg)
10-1/2 in
(267 mm)
6-1/2 in
(165 mm)
49-1/2 in
(1257 mm)
4 West
2000 lb/axle
(907 kg/axle)
3000 lb
(1361 kg)
2570 lb
(1166 kg)
21-1/4 in
(540 mm)
8 in
(203 mm)
HWY-224
OFR-224
3500 lb
(1588 kg)
2960 lb
(1343 kg)
2650 lb
(1202 kg)
18-1/2 in
(470 mm)
HWY-430
2200 lb/axle
(998 kg/axle)
4280 lb
(1941 kg)
3750 lb
(1701 kg)
19-1/4 in
(489 mm)
Model
Distributed By:
Dimensions
Net
Weight
B78-13C
Length: 98 in (2489 mm)
Width: 59 in (1499 mm)
285 lb
(129 kg)
55-1/4 in
(1403 mm)
B78-13
Length: 91 in (2311 mm)**
Width: 61-1/4 in (1556 mm)
430 lb
(1950 kg)
7-1/2 in
(191 mm)
52 in
(1321 mm)
B78-13B
Length: 122-1/2 in (3112 mm)
Width: HWY– 61 in (1549 mm)*
OFR–58-1/2 in (1486 mm)
355 lb
(161 kg)
8-1/2 in
(216 mm)
52 in
(1321 mm)
B78-13B
Length: 156-1/2 in (3975 mm)
Width: 61 in (1549 mm)*
530 lb
(240 kg)
*Width at outside of fenders. **Does not include tongue.
7
Ordering Information
Equipment and Factory Options
Stock No.
Description
Big Blue® 302 CC
#903 799-02-1
#903 801-02-1
Deutz F3L1011, Engine Gauges, Automatic Idle
Perkins 104.22, Engine Gauges, Automatic Idle
#903 800-02-1
#903 800-04-1
#903 802-02-1
#903 802-04-1
Deutz F3L1011, Engine Gauges, Automatic Idle
Deutz F3L1011, Engine Gauges, Automatic Idle, Weld Meters, 15 kW
Perkins 104.22, Engine Gauges, Automatic Idle
Perkins 104.22, Engine Gauges, Automatic Idle, Weld Meters, 15 kW
#903 709-02-1
#903 705-03-1
Deutz F4L1011, Engine Gauges, Automatic Idle
Perkins 3.1524, Engine Gauges, Automatic Idle, Polarity Switch
Deluxe Model
#903 710-02-1
#903 710-04-1
#903 706-02-1
#903 706-04-1
Deutz F4L1011, Engine Gauges, Automatic Idle
Deutz F4L1011, Engine Gauges, Automatic Idle, Weld Meters, 20 kW
Perkins 3.1524, Engine Gauges, Automatic Idle
Perkins 3.1524, Engine Gauges, Automatic Idle, Weld Meters, 20 kW
Big Blue® 502 CC
#903 711
Deutz F3L912
Big Blue® 502 CC/CV
Deluxe Model
#903 712
#903 712-03-1
Deutz F3L912
Deutz F3L912, Engine Gauges, Weld Meters, 20 kW, NO Automatic Idle
#194 700
#043 941
#043 942
#195 056
#043 959
#195 983
#196 015
#043 947
#041 928
#195 118
#043 946
#194 918
#194 683
Deutz F3L912, oil temperature, oil pressure and battery gauges
For all models, analog welding meters
For all models, DC polarity switch
Perkins 104.22, 120 volt block heater
Deutz F3L1011 and F4L1011, 12 volt intake manifold heater
Perkins 3.1524, 120 volt block heater
Deutz F3L912, ether start system
For all models, padlock not included
For all models, vertically externally mounted
For all models, lockable front control panel and engine compartment
For all models, stores up to 200 ft of 2/0 weld cable
For all models, meets offshore oil platform requirements
For all models, will not work with cable holder accessory
#041 122
#129 340
#043 688
#194 744
#129 337
CC models only, hand control
CC/CV models only, amperage or voltage control
CC/CV models only, fingertip control
CC/CV models only, foot control
CC/CV models only, momentary and maintained contact switch
See page 6
#042 388
#042 387
HF-251D-1, 115 VAC. See Lit. Index No. AY/5.0
HF-251D-2, 230 VAC. See Lit. Index No. AY/5.0
#194 890 / #194 941
See Lit. Index No. M/6.4
#173 851
#043 952
2/0, 350 A, 100% duty cycle, 50 ft stinger, 50 ft work clamp
2/0, 300 A, 100% duty cycle, 100 ft stinger, 50 ft work clamp
#194 875
#189 585
#043 805
#043 802
#043 824
#043 826
#043 806
#043 864
#043 863
#042 801
Trailer with lights, fenders and 2-1/2 in lunette eye
Replaces the 2-1/2 in lunette eye on the RCT-224
Trailer with lights, fenders and 2 in ball hitch
Trailer with 2 in ball hitch
Replaces the 2 in ball hitch on the HWY-224 or OFR-224
Trailer mounted cable holder for HWY-224, OFR-224 or HWY-430
Hitch required
For HWY-430 only
For HWY-430 only
4 wheel steerable implement trailer
Big Blue® 302 CC/CV
Deluxe Model
Deluxe Model
Big Blue® 402 CC
Big Blue® 402 CC/CV
Deluxe Model
Field Kit Accessories
Engine Gauge Kit
Weld Ammeter and Voltmeter
Polarity Reversing Switch
Cold Weather Starting Aids
Lockable Fuel Cap Flame Arrestor
Spark Arrestor Muffler
Vandalism Lockout Kit
Cable Holder
Roll Cage/Drip Pan
Protective Cover
Remote Controls
RHC-3GD34A
RHC-14
RCCS-14
RFCS-14 HD
RMLS-14
Remote Control Extension Cords
TIG Accessories
High Frequency Arc Starters
MIG/Flux Cored Accessories
SuitCase™ 8VS/12VS
Stick Accessories
Accessory Kits
Trailers and Hitches
RCT-224 Trailer
Ball Hitch, 2 in
HWY-224 Trailer
OFR-224 Trailer
Lunette Eye, 2-1/2 in
Cable Tree
HWY-430 Trailer
Ball Hitch, 2 in
Lunette Eye, 3 in
4-West Trailer
Date:
Total Quoted Price:
Distributed by:
Litho in USA
Qty.
www.onesourcerental.com
Price