Simpson | 52C850 | User manual | Simpson 52C850 User manual

3:33 PM
Page 1
3:33 PM
Page 2
Safety information - - - - - - - - - - - - - - - - - - -3
Control panel and functions - - - - - - - - - - - -5
Programme table - - - - - - - - - - - - - - - - - - -6
Before the first use - - - - - - - - - - - - - - - - - -7
Filling with rinse aid - - - - - - - - - - - - - - - - - -7
Adjusting the dosage of rinse aid - - - - - - - -8
Loading cutlery and dishes - - - - - - - - - - - -8
Filling with detergent - - - - - - - - - - - - - - - -11
Unloading the dishwasher - - - - - - - - - - - -11
Cleaning and care- - - - - - - - - - - - - - - - - - 12
Environmental concerns - - - - - - - - - - - - - 13
Something not working - - - - - - - - - - - - - - 14
Technical data- - - - - - - - - - - - - - - - - - - - - 16
Consumption values - - - - - - - - - - - - - - - - 16
Hints for test institutes - - - - - - - - - - - - - - - 17
Installation - - - - - - - - - - - - - - - - - - - - - - - 18
Warranty - - - - - - - - - - - - - - - - - - - - - - - - 21
The Thoughtful Design Innovator.
Do you remember the last time you opened a gift that made you say
“Oh! How did you know? That’s exactly what I wanted!” That’s the kind of feeling that the
designers working for all brands in the Electrolux family
seek to evoke in everyone who chooses or uses one of our products.
We devote time, knowledge, and a great deal of thought to anticipating and creating the kind of
appliances that our customers really need and want.
This kind of thoughtful care means innovating with insight. Not design for
design’s sake, but design for the user’s sake. For us, thoughtful design means making appliances
easier to use and tasks more enjoyable to perform, freeing our customers to experience that
ultimate 21st century luxury, ease of mind.
Our aim is to make this ease of mind more available to more people in more parts of their
everyday lives, all over the world. So when we say we’re thinking of you, you know we mean just
Electrolux. Thinking of you.
Dishlex. We are part of theElectrolux family. Share more of our thinking at
3:33 PM
Page 3
Safety information
In the interest of your safety and to ensure correct use, before installing and first using the
appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary
mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly
familiar with its operation and safety features. Save these instructions and make sure that they
remain with the appliance if it is moved or sold, so that everyone using it through its life will be
properly informed on its use and safety.
Correct use
This dishwasher is only intended for washing
household utensils suitable for machine
Do not put any solvents in the dishwasher.
This could cause an explosion.
Knives and other items with sharp points
must be loaded in the cutlery basket with
their points down or placed in a horizontal
position in the upper basket.
Only use products (detergent, cleaners,
rinse aid etc) suitable for dishwashers.
Avoid opening the door while the appliance
is in operation, hot steam may escape.
Do not take any dishes out of the dishwasher
before the end of the dishwashing cycle.
If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order
to avoid a hazard.
This product should be serviced only by an
authorised service engineer, and only
genuine spare parts should be used.
General safety
Dishwasher detergents are very alkaline and
extremely dangerous if swallowed. Be
careful to keep them away from your eyes
and skin, keep children away from the
dishwasher when the door is opened and
only put detergent in the dispenser when you
are ready to wash.
Otherwise, check that the detergent
receptacle in the dispenser is empty.
The water in your dishwasher is not for
drinking. Detergent residues may still be
present in your machine.
Ensure that the door of the dishwasher is
always closed when it is not being loaded or
unloaded. In this way you will avoid anybody
tripping over the open door and hurting
Do not sit or stand on the open door.
Child safety
This appliance is not intended for use by
young children or infirm persons unless they
have been adequately supervised by a
responsible person to ensure that they can
use the appliance safely.
● Young children should be supervised to
ensure that they do not play with the
● Keep all packaging well away from children.
There is risk of suffocation.
● Keep all detergents in a safe place out of
children’s reach.
Keep children well away from the dishwasher
when the door is open.
3:33 PM
Page 4
Check your dishwasher for any transport
damage. Never connect a damaged
machine. If your dishwasher is damaged
contact your supplier.
All packaging must be removed before use.
Any electrical and plumbing work required to
install this appliance must be carried out by
a qualified and competent person.
For safety reasons it is dangerous to alter
the specifications or attempt to modify this
product in any way.
Never use the dishwasher if the electrical
supply cable and water hoses are damaged;
or if the control panel, work top or plinth area
are damaged such that the inside of the
appliance is freely accessible. Contact your
local Customer Care centre, in order to avoid
All sides of the dishwasher must never be
drilled to prevent damage to hydraulic and
electric components.
For electrical and water connection carefully
follow the instructions given in specific
3:34 PM
Page 5
Control panel and functions
Finished light
Program selector dial and
On/Off switch
Program selector dial
and On/Off switch
Start/Cancel button
when in this position, the machine is switched off (corresponding light off),
when the marker on the dial corresponds with a program, the machine
is switched on and a program is selected (corresponding light on)
Starting the washing program:
1. Select a washing program.
2. Press the Start/Cancel button (corresponding light on).
Start/Cancel button
Once the program has started, if you want to change the selection made you
must cancel the washing program in progress.
Finished light
Cancel the washing program in progress:
1. Press and hold the Start/Cancel button until the corresponding light
turns off.
2. Release the Start/Cancel button.
3. Turn the program selector dial to the Off position or select a new
washing program (check that there is detergent in the detergent
Illuminates when the washing program has ended. Switch off the dishwasher
by returning the programme selector dial to the Off position. The On/Off
indicator light turns off.
It also has added functions of visual signalling as:
- intervention of an alarm due to the malfunction of the machine.
3:34 PM
Page 6
Program table
Cycle description
Heavy soil.
Crockery, cutlery,
pots and pans
Prewash - Main wash
2 intermediate rinses Final rinse - Dry
Regular Plus
Normal soil.
Crockery and cutlery
Use this program for maximum performance
Prewash - Main wash
2 intermediate rinses Final rinse - Dry
Quick 30
Light soil.
Crockery and cutlery
Or half load of Normal soil
Main washFinal rinse
Regular Eco
Normal soil.
Crockery and cutlery
This program is recommended to wash a full
load and minimize energy and water usage.
Prewash - Main wash
Final rinse - Dry
Rinse & Hold
Partial load (to be completed later in the
day). This program does not require the
use of detergent.
3:34 PM
Page 7
Before the first use
When using separately rinse aid and
- fill up the rinse aid dispenser with rinse aid
- fill up the detergent dispenser with detergent
When using tablets that integrate
rinse aid and detergent:
- there is no need to fill up with rinse aid:
place the tablets in the detergent dispenser.
When using detergent, rinse aid or tablets,
follow the manufacturers instructions.
If the drying results are not satisfactory we
recommend that you:
1. Fill up the rinse aid dispenser with rinse aid.
2. Set the rinse aid dosage to position 2.
Filling with rinse aid
Open the lid.
Fill up with rinse aid.
The maximum level for
filling is indicated by
Clean up any rinse aid
which overflows. Close
the lid and press until it
Never fill the rinse aid dispenser with any other
substances (e.g. dishwasher cleaning agent,
liquid detergent). This may damage the
Top up the rinse aid
when the indicator (B)
becomes clear.
3:34 PM
Page 8
Adjusting the dosage of rinse aid
Increase the dose if there are drops of water or
lime spots on the dishes after washing.
Open the lid.
Reduce the dose if there are whitish streaks
on the dishes or a bluish film on glassware or
knife blades.
Set the dosage level.
(The dose is factory set
in position 4).
Close the lid and press
until it locks.
Loading cutlery and dishes
The following items are not suitable for use
in the dishwasher:
- Cutlery with wooden, horn, china or
mother-of-pearl handles
- Plastic items that are not heat resistant
- Older cutlery with glued parts that are not
temperature resistant
- Bonded cutlery items or dishes
- Pewter or copper items
- Lead crystal glass
- Steel items prone to rusting
- Wooden platters
- Items made from synthetic fibres
When loading the dishwasher, make sure
that you:
- Remove all left over food and debris.
- Soften remnants of burnt food in pans
- Load hollow items such as cups, glasses,
pans, etc. with the opening downwards so
that water cannot collect in the container
or a deep base.
- Dishes and items of cutlery must not lie
inside one another, or cover each other.
- To avoid damage to glasses, they must not
- Lay small objects in the cutlery basket.
Plastic items and pans with non stick
coating have a tendency to retain water
drops; these items will not dry as well as
porcelain and steel items.
Before closing the door, ensure that the spray
arms can rotate freely.
3:34 PM
Page 9
Load cutlery.
For best results we
recommend you to use
the cutlery grid provided
(if the size and
dimensions of the
cutlery allow it).
Place knives and other
items of cutlery with
sharp points or edges
with their handles facing
Risk of injury!
Load the lower basket.
Arrange serving dishes and large lids around the
edge of the basket.
Load upper basket.
Light items (plastic
bowls etc.) must be
loaded in the upper
basket and arranged so
they do not move.
For taller items, the cup
racks can be folded
If plates are to be loaded in the upper basket:
load them starting from the rear positions; tilting
them slightly forwards and avoiding the front
positions near the door.
3:34 PM
Page 10
Adjusting the height of the upper basket
If washing very large
plates you can load them
in the lower basket after
moving the upper basket
to the higher position.
Maximum height of the dishes in:
upper basket
lower basket
With upper basket raised
20 cm
31 cm
With upper basket lowered
24 cm
27 cm
Only adjust the height when the upper basket
is empty.
When the basket is in the higher position you
will not be able to use the cup racks.
Move the front runner
stops (A) of the upper
basket outwards and
slide the basket out.
Refit the basket in
the higher position
and replace the stops
(A) in their original
3:34 PM
Page 11
Filling with detergent
Only use detergents suitable for dishwashers.
Observe the manufacturer’s dosing and storage recommendations.
For programmes with
prewash add an
additional detergent
dose in compartment B.
Open the lid.
Fill in the detergent in
compartment A.
When using detergent
place detergent tablets
in compartment A.
Close the lid.
Observe the dosing
Unloading the dishwasher
Open the dishwasher door, leave it ajar and
wait a few minutes before removing the
dishes: hot dishes are sensitive to knocks. In
this way they will be cooler and the drying will
be improved.
Empty the lower basket first and then the
upper one; this will avoid water dripping from
the upper basket onto the dishes in the lower
● Water may appear on the sides and the door
of the dishwasher as the stainless steel will
eventually become cooler than the dishes.
3:34 PM
Page 12
Cleaning and Care
Cleaning the filters
NEVER use the dishwasher without filters as this may result in damage to the appliance.
Incorrect repositioning and fitting of the filters will produce poor washing results.
The dishwasher must
be switched off
Put the flat filter A back
in the base of the
washing compartment
and ensure that it fits
perfectly under the two
guides D.
Clean filters A, B and C
thoroughly under
running water.
Replace the filters and
lock by turning the
handle clockwise to the
Turn the handle about
/4 turn anticlockwise
and remove filters B
and C.
NEVER try to
remove the spray
If residues of soil
have clogged the
holes in the upper
spray arm, remove
them with a toothpick.
Remove filter A from the
base of the washing
3:34 PM
Page 13
External cleaning
Frost precautions
Clean the external surfaces of the machine and
control panel with a damp soft cloth. If
necessary use only neutral detergents. Never
use abrasive products, scouring pads or
solvent (acetone, trichloroethylene etc....).
Ensure that the seals around the door, the
detergent and rinse aid dispensers are cleaned
regularly with a damp cloth.
We recommend every 3 months to run the Pots
wash program using detergent but without
Avoid placing the machine in a location where
the temperature is below 0°C. If this is
unavoidable, empty the machine, close the
appliance door, disconnect the water inlet pipe
and empty it.
Prolonged periods of non-operation
If you are not using the machine for any
prolonged period of time you are advised to:
1. Unplug the appliance and then turn off the
2. Leave the door ajar to prevent the formation
of any unpleasant smells.
3. Leave the inside of the machine clean.
Moving the machine
If you have to move the machine (moving
house etc....):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and discharge
4. Pull the machine out together with the
5. Only transport the dishwasher in an upright
position, otherwise water may run out.
Environmental concerns
Packaging material
Old appliance
The packaging materials are environmentally
friendly and can be recycled. The plastic
components are identified by markings, e.g.
>PE<, >PS<, etc. Please dispose of the
packaging materials in the appropriate
container at the community waste disposal
This appliance should be handed over to the
applicable collection point for recycling. By
ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product.
For more detailed information about recycling
of this product, please contact your local city
office, your household waste disposal service
or the shop where you purchased the product.
When a unit is no longer being used:
- Pull the plug out of the socket.
- Cut off the cable and plug and dispose of
- Dispose of the door catch.
This prevents children from trapping
themselves inside and endangering their
3:34 PM
Page 14
Something not working
The dishwasher will not start or stops during operation.
Certain problems are due to the lack of simple maintenance or oversights, which can be solved
with the help of the indications described in the chart, without calling out a service technician.
Switch off the dishwasher, open the door and carry out the following suggested corrective actions.
Fault code / malfunction
The dishwasher does not fill with
- continuous flashing of the
start/cancel indicator light
- repeating single flash of the
"Finished" indicator light
The dishwasher will not drain.
- continuous flashing of the
start/cancel indicator light
- repeating double flash of the
"Finished" indicator light
The programme does not start.
Possible cause
The water tap is blocked or furred
with limescale.
The water tap is turned off.
The filter (where present) in the
threaded hose fitting at the water
inlet valve is blocked.
The water inlet hose has not been
correctly laid or it is bent or
Clean the water tap.
Turn the water tap on.
Clean the filter in the.
threaded hose fitting.
Check the water inlet hose
The sink spigot is blocked.
Clean out the sink spigot.
The water drain hose has not been
correctly laid or it is bent or
Check the water drain hose
The dishwasher door has not been
properly closed.
Close the door
The main plug is not plugged in.
Insert the mains plug
The fuse has blown in the household Replace the fuse.
fuse box.
Delay start has been selected.
If dishes are to be washed
immediately, cancel the delay
Once these checks have been carried out; close the door, switch on the dishwasher and press the
start/cancel button. The program will continue from the point at which it was interrupted. If the
malfunction or fault code reappears contact your Customer Care Centre.
For other combinations of fault codes not described in the above chart, please contact your
Customer Care Centre.
3:34 PM
Page 15
The wash results are not satisfactory
The dishes are not clean
The wrong washing program has been selected.
The dishes were arranged in such a way as to stop water reaching all parts
of the surface. The baskets must not be overloaded.
● The spray arms do not rotate freely due to wrong arrangement of the load.
● The filters in the base of the washing compartment are dirty or incorrectly
● Too little or no detergent has been used.
● The drain hose connection is not correct.
The dishes are wet and
Rinse aid was not used.
The rinse aid dispenser is empty.
There are streaks, milky
spots or a bluish coating
on glasses and dishes
Decrease rinse aid dosing.
Water drops have dried
onto glasses and dishes
Increase rinse aid dosing.
The detergent may be the cause, Contact the detergent manufacturer’s
consumer care line.
If after all these checks, the problem persists,
contact your local Customer Care Centre,
quoting the model (Mod.), product number
(PNC) and serial number (S.N.).
This information can be found on the rating
plate located on the side of the dishwasher
door (see picture).
So that you always
have these numbers
at hand, we
recommend you note
them here:
Mod. :. . . . . . . . . . . . . . . . . . . . . . . . . . . .
PNC : . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3:34 PM
Page 16
Technical data
Depth (including control panel)
60 cm
85 cm
61 cm
Electrical connection
Voltage - Overall power - Fuse
Information on the electrical connection is given on the rating plate on
the inner edge of the dishwasher’s door.
Water supply pressure
Maximum cold water
Maximum hot water
50 kPa (7 psir)
800 kPa (116 psi)
350 kPa (51 psi)
12 place settings
Max. weight
41 Kg
Noise level
53 dB (A)
Consumption values
The consumption values are intended as a
guide and depend on the pressure and
temperature of the water and also by the
variations of the power supply and the amount
of dishes.
Programme duration
115 - 130
1,8 - 2,0
22 - 24
Regular Plus
110 - 115
1,5 - 1,7
23 - 25
90 - 100
0,83 - 0,91
16 - 18
< 0,1
Quick 30
Regular Eco (1)
(Test programme for
AS/NZS 2007)
Rinse & Hold
(1) The Regular Eco program saves energy and water. It runs at a lower temperature so it is not
suitable for heavy soiled wash loads. To save energy, dry performance is reduced so you may
have to open the door at the end of the wash cycle or even towel dry some dishes.
3:34 PM
Page 17
Hints for test institutes
Testing in accordance with AS/NZS 2007 must
be carried out with the appliance fully loaded
and using the test programme (see
"Consumption values"). The rinse aid dispenser
must be filled and the door must be opened at
the end of cycle for 30 minutes for drying
Full load:
12 standard place settings
Amount of detergent required:
5 g + 25 g (AS/NZS)
Rinse aid setting:
position 4 (AS/NZS)
Upper basket
Cup racks:
position A
Cutlery basket
Lower basket
3:34 PM
Page 18
Any electrical and/or plumbing work required to
install this appliance should be carried out by a
qualified electrician and/or plumber or
competent person.
Water connection
This dishwasher may be fed with either hot
(max. 60°) or cold water. Nevertheless we
recommend connection to a cold water supply.
When the dishwasher is likely to be connected
to a solar hot water system, drip heater, or any
other supply where temperatures in excess of
60° are anticipated, a water temperature
tempering valve should be installed. A pressure
reducing valve must be fitted if the hot water
supply pressure can exceed 350 kPa or the
cold supply pressure can exceed 800 kPa.
Always use a new hose-set when connecting
the appliance to the water mains. An old hoseset must not be reused. The inlet hose should
be inspected every 12 months for deterioration
and replaced if necessary.
If the machine is connected to new pipes or pipes which have not been used for a long time, you
should run the water for a few minutes before connecting the inlet hose.
Inlet hose
Drain hose
Connect the inlet hose to a water tap with an
external thread of 3/4” BSP.
The inlet hose can be turned either to the left or the
right to suit the installation by means of the locknut.
The locknut must be correctly fitted to avoid water
- Connect drain hose to the sink. Secure it with the
supplied hose clamp.
- Required height: 30 to 100 cm above bottom of
the dishwasher.
- If you use a drain hose extension the total length
should not be longer than 4 metres. Likewise the
internal diameter of the couplings used for
connections to the waste outlet must be no
smaller than the diameter of the hose provided.
3:34 PM
Page 19
Remove internal membrane from drain spigot.
When connecting the drain hose to an under sink
trap spigot, the entire plastic membrane must be
removed. Failure to remove all the membrane will
result in food particles building up over time
eventually blocking the dishwasher drain hose
Ensure that the hoses
are not kinked, crushed
or entangled.
Electrical connection
Safety standards require the appliance to be
Prior to using the appliance for the first time,
ensure that the rated voltage and type of
supply on the rating plate match that of the
supply where the appliance is to be installed.
The fuse rating is also to be found on the
rating plate.
Always plug the mains plug into a correctly
installed approved socket.
Multi-way plugs, connectors and extension
cables must not be used. This could
constitute a fire hazard through overheating.
If necessary, have the domestic wiring
system socket replaced. If the electrical
supply cord has to be replaced, contact your
local Customer Care centre.
The plug must be accessible after the
appliance has been installed.
Never unplug the appliance by pulling on the
cable. Always pull the plug.
The manufacturer accepts no liability for failure
to observe the above safety precautions.
Ensure that the dishwasher has been tested
using the rinse & hold or quick 30 cycle and
that the dishwasher fills with water, washes
and drains with no leaks.
3:34 PM
Page 20
Fitting under a counter
By removing the dishwasher’s worktop, you
can install it under a close fitting sink unit or a
pre-existing top.
Unscrew the two screws
at the rear.
Be sure that once the appliance has been
installed, it is easily accessible for the service
engineer in the event that a repair is required.
Push the top backwards
about 1 cm.
Lift top at the front and
remove it.
Check if the dishwasher
is levelled.
If not, loosen or tighten
the adjustable feet until
the appliance is
perfectly levelled.
Good levelling is essential for correct
closure and sealing of the door.
When the appliance is correctly levelled,
the door will not catch on either side of the
3:34 PM
Page 21
APPLIANCE: Dishwasher
This document sets out the terms and conditions of
product warranties for Electrolux branded appliances.
It is an important document. Please keep it with your
proof of purchase documents in a safe place for future
reference should you require service for your
Electrolux appliance.
General Terms and Conditions
1. In this warranty
(a) "Electrolux" means Electrolux Home Products Pty
Ltd ABN 51 004 762 341 in respect of Appliances
purchased in Australia and Electrolux (NZ) Limited in
respect of Appliances purchased in New Zealand;
(b) "Appliance" means any Electrolux product
purchased by you accompanied by this document;
(c) "Warranty Period" means
(i) where you use the Appliance for personal,
domestic or household purposes in Australia the
period of 24 months and in New Zealand the
period of 24 months;
(ii) where you use the Appliance for commercial
purposes, in Australia the period of 0 months and
in New Zealand the period of 0 months, (if the
period stated is 0 months you are not covered
by this product warranty) following the date of
original purchase of the Appliance;
(d) "you" means the purchaser of the Appliance not
having purchased the appliance for re-sale, and
"your" has a corresponding meaning.
2. This warranty only applies to Appliances purchased
and used in Australia or New Zealand and is in addition
to (and does not exclude, restrict, or modify in any
way) any non-excludable statutory warranties in
Australia or New Zealand.
3. Electrolux warrants that, when dispatched from an
Electrolux warehouse, the Appliance is free from defects
in materials and workmanship for the Warranty Period.
4. During the Warranty Period Electrolux or its Authorised
Service Centre will, at no extra charge if your appliance
is readily accessible without special equipment, and
subject to these terms and conditions, repair or replace
any parts which it considers to be defective. You agree
that any replaced Appliances or parts become the
property of Electrolux. This warranty does not apply to
light globes, batteries, filters or similar perishable parts.
5. Parts and Appliances not supplied by Electrolux are not
covered by this warranty.
6. Where you are within an Electrolux service area, this
warranty covers the cost of transport of the Appliance
to and from Authorised Service Centres of Electrolux
and travelling costs for representatives of the
Authorised Service Centre to and from your home or
business. If you are outside an Electrolux service area,
you will bear these costs. For information about
whether you are within an Electrolux service area,
please phone 13 13 49 in Australia, or 0800 10 66 10
in New Zealand.
7. Proof of purchase is required before you can make a
claim under this warranty.
8. You may not make a claim under this warranty unless
the defect claimed is due to faulty or defective parts or
Electrolux is not liable in the following situations (which
are not exhaustive):
(a) The Appliance is damaged by:
(i) accident
(ii) misuse or abuse, including failure to properly
maintain or service
(iii) normal wear and tear
(iv) power surges, electrical storm damage or
incorrect power supply
(v) incomplete or improper installation
(vi) incorrect, improper or inappropriate operation
(vii) insect or vermin infestation.
(b) The Appliance is modified without authority from
Electrolux in writing.
(c) The Appliance’s serial number or warranty seal has
been removed or defaced.
(d) The Appliance was serviced or repaired by anyone
other than Electrolux or its Authorised Service
9. This warranty, the contract to which it relates and the
relationship between you and Electrolux are governed
by the law applicable in the Australian State where the
Appliance was purchased or the law applicable in New
Zealand if the Appliance was purchased in New
Zealand. Where the Appliance was purchased in New
Zealand for business purposes the Consumer
Guarantee Act does not apply.
3:34 PM
Page 22
Limitation of Liability
10. To the extent permitted by law:
(a) Electrolux excludes all warranties other than as
contained in this document;
(b) Electrolux shall not be liable for any loss or
damage whether direct or indirect or consequential
arising from your purchase, use or non-use of the
11. Provisions of the Trade Practices Act and State
consumer legislation in Australia, and the Consumer
Guarantees Act, the Sale of Goods Act and the Fair
Trading Act in New Zealand, imply warranties or
conditions, or impose obligations, upon Electrolux
which cannot be excluded, restricted or modified. To
the extent permitted by law, the liability of
Electrolux (if any) arising out of or in relation to the
Appliance or any services supplied by Electrolux shall
be limited (where it is fair and reasonable to do so):
(a) in the case of Appliances, at its option, to the
replacement or repair of the Appliances or the
supply of equivalent products or the
payment of the cost of replacing the Appliances or
having the Appliances repaired or of acquiring
equivalent Appliances. Upon being replaced, parts
and Appliances become the property of Electrolux;
(b) in the case of services, at its option, to the supply
of the services again or the payment of the cost of
having the services re-supplied;
and in the case of Appliances or services supplied in New
Zealand, loss or damage whether direct or indirect or
consequential that is reasonably foreseeable.
You acknowledge that in the event that you make a
warranty claim it will be necessary for Electrolux and its
Authorised Service Centres to exchange information in
relation to you to enable Electrolux to meet its obligations
under this warranty.
Important Notice
Before Calling a Service Technician please check carefully the operating instructions, service booklet and the warranty terms
and conditions.
Please call 13 13 49
For the cost of a local call
(Australia only)
Please call 13 13 50
For the cost of a local call (Australia only)
AUCKLAND Prime Distributors Ltd. 8 Highbrook Drive, East Tamaki . . . . . (09) 273 3580
OF YOUR NEAREST STATE CHRISTCHURCH Prime Distributors Ltd. Unit 1, 127 Montreal Street . . . . (03) 377 1009
R. Redpath Ltd. 55 Ferry Road . . . . . . . . . . . . . . . . . . (03) 379 0446
DUNEDIN Appliance Parts Company, 590 Hillside Road . . . . . . . . . . . . . . (03) 455 5443
Free call 0800 10 66 10
(New Zealand only)
3:34 PM
Page 23
3:34 PM
Page 24
156 998 841
Subject to change without notice
Download PDF