Touch SLCD1 Xplained Pro

Touch SLCD1 Xplained Pro
Atmel QTouch
Touch SLCD1 Xplained Pro
USER GUIDE
Preface
®
The Atmel Touch SLCD1 Xplained Pro is an extension for the Atmel
Xplained Pro platform.
The kit offers a segment LCD display with 8x24 segments (179 usable
segments) and five on-glass mutual capacitance touch sensors for
evaluation with the Peripheral Touch Controller (PTC) module.
Touch SLCD1 Xplained Pro is designed to make it easy to start segment
LCD development with Atmel microcontrollers that supports segment LCDs.
Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
Table of Contents
Preface............................................................................................................................ 1
1. Introduction................................................................................................................ 3
1.1.
1.2.
Features....................................................................................................................................... 3
Kit Overview................................................................................................................................. 3
2. Getting Started...........................................................................................................5
2.1.
2.2.
Xplained Pro Quick Start.............................................................................................................. 5
Design Documentation and Relevant Links................................................................................. 5
3. Xplained Pro.............................................................................................................. 6
3.1.
3.2.
Hardware Identification System....................................................................................................6
Xplained Pro Headers and Connectors........................................................................................6
3.2.1.
Xplained Pro Segment LCD Connector......................................................................... 6
4. Hardware User Guide................................................................................................ 9
4.1.
4.2.
4.3.
Electrical Characteristics.............................................................................................................. 9
Headers and Connectors..............................................................................................................9
4.2.1.
Touch SLCD1 Xplained Pro Extension Connector.........................................................9
Touch Segment LCD Display......................................................................................................10
4.3.1.
Segments.....................................................................................................................10
4.3.2.
Touch Buttons.............................................................................................................. 12
5. Revision History and Known Issues........................................................................ 13
5.1.
5.2.
Identifying Product ID and Revision........................................................................................... 13
Revision 3...................................................................................................................................13
6. Document Revision History..................................................................................... 14
7. Evaluation Board/kit Important Notice..................................................................... 15
Atmel Touch SLCD1 Xplained Pro [USER GUIDE]
Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
2
1.
Introduction
1.1.
Features
•
•
1.2.
Custom segment LCD with 179 individually controllable segments
– 8 common x 24 segment lines
– Eight 14-segment alphanumeric characters
– Five and a half 7-segment characters with delimiters
– Four stage wireless signal indicator
– Four stage battery indicator
– AM, PM, Celsius, Fahrenheit, m, μ, V, A, USB, and Atmel logo indicators
– Five arrows with mutual capacitance touch overlay
Xplained Pro hardware identification system
Kit Overview
Atmel Touch SLCD1 Xplained Pro extension board is a small circuit board, with a custom touch segment
LCD display, that is compatible with Xplained Pro MCU boards with a segment LCD connector.
Figure 1-1 Touch SLCD1 Xplained Pro Top Overview
Atmel Touch SLCD1 Xplained Pro [USER GUIDE]
Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
3
Figure 1-2 Touch SLCD1 Xplained Pro Bottom Overview
Atmel Touch SLCD1 Xplained Pro [USER GUIDE]
Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
4
2.
Getting Started
2.1.
Xplained Pro Quick Start
Three steps to start exploring the Atmel Xplained Pro platform:
1. Download Atmel Studio.
2. Launch Atmel Studio.
3. Connect Touch SLCD1 Xplained Pro to an Xplained Pro MCU board and connect a USB cable to
the DEBUG USB port on the Xplained Pro MCU board.
When the Xplained Pro MCU kit is connected to your computer for the first time, the operating system will
®
perform a driver software installation. The driver file supports both 32- and 64-bit versions of Microsoft
®
®
Windows XP, Windows Vista , Windows 7, and Windows 8.
Once the Xplained Pro MCU board is powered the green power LED will be lit and Atmel Studio will auto
detect which Xplained Pro MCU- and extension board(s) are connected. Atmel Studio will present
relevant information like datasheets and kit documentation. The kit landing page in Atmel Studio also has
the option to launch Atmel Software Framework (ASF) example applications for the kit. The target device
is programmed and debugged by the on-board Embedded Debugger and therefore no external
programmer or debugger tool is needed.
2.2.
Design Documentation and Relevant Links
The following list contains links to the most relevant documents and software for the Touch SLCD1
Xplained Pro.
•
•
•
•
•
•
•
•
Xplained Pro products - Atmel Xplained Pro is a series of small-sized and easy-to-use evaluation
kits for Atmel microcontrollers and other Atmel products. It consists of a series of low-cost MCU
boards for evaluation and demonstration of features and capabilities of different MCU families.
Atmel Studio - Free Atmel IDE for development of C/C++ and assembler code for Atmel
microcontrollers.
®
®
®
Atmel QTouch Library PTC - QTouch Library for Atmel AVR and ARM -based microcontrollers.
®
Atmel QTouch Composer - Tool for developing capacitive buttons, sliders, and wheels
applications.
Atmel Data Visualizer - Atmel Data Visualizer is a program used for processing and visualizing
data. Data Visualizer can receive data from various sources such as the Embedded Debugger Data
Gateway Interface found on Xplained Pro boards and COM ports.
Design Documentation - Package containing CAD source, schematics, BOM, assembly drawings,
3D plots, layer plots etc.
Hardware Users Guide in PDF format - PDF version of this User Guide.
Touch SLCD1 Xplained Pro on Atmel web page - Atmel website link.
Atmel Touch SLCD1 Xplained Pro [USER GUIDE]
Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
5
3.
Xplained Pro
Xplained Pro is an evaluation platform that provides the full Atmel microcontroller experience. The
platform consists of a series of Microcontroller (MCU) boards and extension boards, which are integrated
with Atmel Studio, have Atmel Software Framework (ASF) drivers and demo code, support data
streaming, and more. Xplained Pro MCU boards support a wide range of Xplained Pro extension boards,
which are connected through a set of standardized headers and connectors. Each extension board has
an identification (ID) chip to uniquely identify which boards are connected to an Xplained Pro MCU board.
This information is used to present relevant user guides, application notes, datasheets, and example
code through Atmel Studio.
3.1.
Hardware Identification System
™
All Xplained Pro compatible extension boards have an Atmel ATSHA204 CryptoAuthentication chip
mounted. This chip contains information that identifies the extension with its name and some extra data.
When an Xplained Pro extension is connected to an Xplained Pro MCU board the information is read and
sent to Atmel Studio. The Atmel Kits extension, installed with Atmel Studio, will give relevant information,
code examples, and links to relevant documents. The table below shows the data fields stored in the ID
chip with example content.
Table 3-1 Xplained Pro ID Chip Content
Data field
Data type
Example content
Manufacturer
ASCII string
Atmel'\0'
Product Name
ASCII string
Segment LCD1 Xplained Pro'\0'
Product Revision
ASCII string
02'\0'
Product Serial Number
ASCII string
1774020200000010’\0’
Minimum Voltage [mV]
uint16_t
3000
Maximum Voltage [mV]
uint16_t
3600
Maximum Current [mA]
uint16_t
30
3.2.
Xplained Pro Headers and Connectors
3.2.1.
Xplained Pro Segment LCD Connector
Xplained Pro MCU boards that have a microcontroller, which supports segment LCDs, can implement a
51-pin segment LCD extension connector. This connector is implemented with HIROSE DF-9 series.
Xplained Pro MCU boards use the male version DF9-51P-1V(69) and Xplained Pro extension boards use
the female counterpart DF9-51S-1V(69). The connector has a standardized pin-out as shown in the table
below.
Atmel Touch SLCD1 Xplained Pro [USER GUIDE]
Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
6
Info: All pins are not connected on all Xplained Pro MCU boards, it depends on how many segments
and common terminals the target MCU supports.
Pin 37, 38, 39, 40, 41, and 42 can alternatively be used for QTouch signals. When they are
used for touch they should not be used for display segments.
Table 3-2 Xplained Pro Segment LCD Connector
Description
Function
Pin
Pin
Function
Description
Common terminal 3
COM3
1
2
COM2
Common terminal 2
Common terminal 1
COM1
3
4
COM0
Common terminal 0
Segment 0
SEG0
5
6
SEG1
Segment 1
Segment 2
SEG2
7
8
SEG3
Segment 3
Segment 4
SEG4
9
10
SEG5
Segment 5
Segment 6
SEG6
11
12
SEG7
Segment 7
Segment 8
SEG8
13
14
SEG9
Segment 9
Segment 10
SEG10
15
16
SEG11
Segment 11
Segment 12
SEG12
17
18
SEG13
Segment 13
Segment 14
SEG14
19
20
SEG15
Segment 15
Segment 16
SEG16
21
22
SEG17
Segment 17
Segment 18
SEG18
23
24
SEG19
Segment 19
Segment 20
SEG20
25
26
SEG21
Segment 21
Segment 22
SEG22
27
28
SEG23
Segment 23
Segment 24
SEG24
29
30
SEG25
Segment 25
Segment 26
SEG26
31
32
SEG27
Segment 27
Segment 28
SEG28
33
34
SEG29
Segment 29
Segment 30
SEG30
35
36
SEG31
Segment 31
Segment 32 /
QTouch X-line 2
SEG32 / QT_X2
37
38
SEG33 / QT_Y2
Segment 33 /
QTouch Y-line 2
Segment 34 /
QTouch X-line 1
SEG34 / QT_X1
39
40
SEG35 / QT_Y1
Segment 35 /
QTouch Y-line 1
Segment 36 /
QTouch X-line 0
SEG36 / QT_X0
41
42
SEG37 / QT_Y0
Segment 37 /
QTouch Y-line 0
Common terminal 4
COM4
43
44
COM5
Common terminal 5
Common terminal 6
COM6
45
46
COM7
Common terminal 6
Backlight anode
Backlight V+
47
48
Backlight V-
Backlight cathode
Atmel Touch SLCD1 Xplained Pro [USER GUIDE]
Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
7
Description
Function
Pin
Pin
Function
Description
Backlight control
Backlight CTRL
49
50
ID
Xplained Pro ID
Ground
GND
51
Atmel Touch SLCD1 Xplained Pro [USER GUIDE]
Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
8
4.
Hardware User Guide
4.1.
Electrical Characteristics
Touch SLCD1 Xplained Pro can be connected to several Xplained Pro MCU boards and manually
connected to other hardware. Xplained Pro MCU board(s) that does not have 3.3V as it's primary target
voltage will read all ID devices on connected extensions to check if they support the target voltage before
enabling it to the extension headers. The table below shows the static content written in the ID chip.
Table 4-1 Touch SLCD1 Xplained Pro ID Chip Content
Data field
Content
Product name
TSLCD1 Xplained Pro
Minimum operation voltage
0V
Maximum operation voltage
3.6V
Maximum current
1mA
Related Links
Hardware Identification System on page 6
4.2.
Headers and Connectors
4.2.1.
Touch SLCD1 Xplained Pro Extension Connector
Touch SLCD1 Xplained Pro implements one Xplained Pro segment LCD connector which makes it
possible to connect the board to any Xplained Pro MCU board with segment LCD support.Touch SLCD1
Xplained Pro requires eight common terminals and segment terminals 0 through 23 to control all
segments. The complete pin-mapping for the connector is described in the table below.
Table 4-2 Xplained Pro Segment LCD Connector
Description
Function
Pin
Pin
Function
Description
Common terminal 3
COM3
1
2
COM2
Common terminal 2
Common terminal 1
COM1
3
4
COM0
Common terminal 0
Segment 0
SEG0
5
6
SEG1
Segment 1
Segment 2
SEG2
7
8
SEG3
Segment 3
Segment 4
SEG4
9
10
SEG5
Segment 5
Segment 6
SEG6
11
12
SEG7
Segment 7
Segment 8
SEG8
13
14
SEG9
Segment 9
Segment 10
SEG10
15
16
SEG11
Segment 11
Segment 12
SEG12
17
18
SEG13
Segment 13
Segment 14
SEG14
19
20
SEG15
Segment 15
Segment 16
SEG16
21
22
SEG17
Segment 17
Atmel Touch SLCD1 Xplained Pro [USER GUIDE]
Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
9
Description
Function
Pin
Pin
Function
Description
Segment 18
SEG18
23
24
SEG19
Segment 19
Segment 20
SEG20
25
26
SEG21
Segment 21
Segment 22
SEG22
27
28
SEG23
Segment 23
NC
29
30
NC
NC
31
32
NC
NC
33
34
NC
NC
35
36
NC
QTouch X-line 2
QT_X2
37
38
NC
QTouch X-line 1
QT_X1
39
40
QT_Y1
QTouch Y-line 1
QTouch X-line 0
QT_X0
41
42
QT_Y0
QTouch Y-line 0
Common terminal 4
COM4
43
44
COM5
Common terminal 5
Common terminal 6
COM6
45
46
COM7
Common terminal 6
NC
47
48
NC
NC
49
50
ID
GND
51
Ground
Xplained Pro ID
Related Links
Xplained Pro Segment LCD Connector on page 6
4.3.
Touch Segment LCD Display
Touch SLCD1 Xplained Pro features an LCD module with 8 common and 24 segment terminals. These
179 segments form eight 14-segment characters, five and a half 7-segment characters with delimiters,
and some icons. The LCD module runs at 1/8 duty cycle and 1/4 bias. Five mutual capacitance buttons
are available on-glass as a separate glass overlay on top of the segment display. These touch buttons
are intended to be used with the Peripheral Touch Controller (PTC) available in Atmel microcontrollers.
4.3.1.
Segments
The figure and table below shows the relation between the common terminals, segment terminals, and
the segments on the display.
Atmel Touch SLCD1 Xplained Pro [USER GUIDE]
Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
10
Figure 4-1 YMCC8263AAAYDCNC Segments
Table 4-3 YMCC42412AAAFDCL Segments
COM0 COM1 COM2 COM3 COM4 COM5 COM6 COM7 Comments
SEG0
B2
B0
B1
N0
N1
N2
N3
N4
Colon, Atmel logo, USB,
and arrow indicators.
SEG1
D1a
D1f
D1b
D1g
D1e
D1c
D1d
P0
1st 7-segment character
and 1st dot-point.
SEG2
W0
W2
Bt0
Bt2
SEG3
W1
W3
Bt1
Bt3
SEG4
D2a
D2f
D2b
D2g
D2e
D2c
D2d
P1
2nd 7-segment character
and 2nd dot-point.
SEG5
D3a
D3f
D3b
D3g
D3e
D3c
D3d
P2
3rd 7-segment character
and 3rd dot-point.
SEG6
D4a
D4f
D4b
D4g
D4e
D4c
D4d
P3
4th 7-segment character
and 4th dot-point.
SEG7
D5a
D5f
D5b
D5g
D5e
D5c
D5d
P4
5th 7-segment character
and 5th dot-point.
SEG8
C0d
C0e
C0l
C0j
C0h
C0g
C0f
1st 14-segment character
SEG9
C0c
C0n
C0m
C0k
C0i
C0b
C0a
SEG10
C1d
C1e
C1l
C1j
C1h
C1g
C1f
SEG11
C1c
C1n
C1m
C1k
C1i
C1b
C1a
SEG12
C2d
C2e
C2l
C2j
C2h
C2g
C2f
3rd 14-segment character
4 stage wireless- and
battery indicator.
2nd 14-segment character
SEG13
S5
C2c
C2n
C2m
C2k
C2i
C2b
C2a
3rd 14-segment character
and micro indicator
SEG14
S4
C3d
C3e
C3l
C3j
C3h
C3g
C3f
4th 14-segment character
and milli indicator.
SEG15
S6
C3c
C3n
C3m
C3k
C3i
C3b
C3a
4th 14-segment character
and Volt indicator.
Atmel Touch SLCD1 Xplained Pro [USER GUIDE]
Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
11
COM0 COM1 COM2 COM3 COM4 COM5 COM6 COM7 Comments
4.3.2.
SEG16
D01
C4d
C4e
C4l
C4j
C4h
C4g
C4f
5th 14-segment character
and upper part of half
segment.
SEG17
D02
C4c
C4n
C4m
C4k
C4i
C4b
C4a
5th 14-segment character
and minus indicator.
SEG18
D03
C5d
C5e
C5l
C5j
C5h
C5g
C5f
6th 14-segment character
and lower part of half
segment.
SEG19
S2
C5c
C5n
C5m
C5k
C5i
C5b
C5a
6th 14-segment character
and Celsius indicator.
SEG20
S1
C6d
C6e
C6l
C6j
C6h
C6g
C6f
7th 14-segment character
and PM indicator.
SEG21
S0
C6c
C6n
C6m
C6k
C6i
C6b
C6a
7th 14-segment character
and AM indicator.
SEG22
S3
C7d
C7e
C7l
C7j
C7h
C7g
C7f
8th 14-segment character
and Fahrenheit indicator.
SEG23
S7
C7c
C7n
C7m
C7k
C7i
C7b
C7a
8th 14-segment character
and Ampere indicator.
Touch Buttons
The display contains a touch overlay containing five mutual capacitance touch buttons placed above the
five arrows on the segment LCD. These touch buttons are intended to be used with the Peripheral Touch
Controller (PTC) of supported Atmel devices. The table below show the connections for the touch overlay.
Table 4-4 Touch Buttons
Button
X-line
Y-line
Comments
N0
X0
Y0
Up arrow
N1
X1
Y0
Down arrow
N2
X1
Y1
Left arrow
N3
X0
Y1
Right arrow
N4
X2
Y1
Return arrow
Atmel Touch SLCD1 Xplained Pro [USER GUIDE]
Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
12
5.
Revision History and Known Issues
5.1.
Identifying Product ID and Revision
The revision and product identifier of Xplained Pro boards can be found in two ways; either through Atmel
Studio or by looking at the sticker on the bottom side of the PCB.
By connecting an Xplained Pro MCU board to a computer with Atmel Studio running, an information
window will pop up. The first six digits of the serial number, which is listed under kit details, contain the
product identifier and revision. Information about connected Xplained Pro extension boards will also
appear in the Atmel Kit's window.
The same information can be found on the sticker on the bottom side of the PCB. Most kits will print the
identifier and revision in plain text as A09-nnnn\rr, where nnnn is the identifier and rr is the revision.
Boards with limited space have a sticker with only a QR-code, which contains a serial number string.
The serial number string has the following format:
"nnnnrrssssssssss"
n = product identifier
r = revision
s = serial number
The product identifier for Touch SLCD1 Xplained Pro is A09-2573.
5.2.
Revision 3
Revision 3 is the initially released revision.
Revision 3 of Touch SLCD1 Xplained Pro is bundled and shipped together with SAM L22 Xplained Pro
(ATSAML22-XPRO-B).
Atmel Touch SLCD1 Xplained Pro [USER GUIDE]
Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
13
6.
Document Revision History
Doc. rev.
Date
Comment
42558A
12/2015
Initial document release.
Atmel Touch SLCD1 Xplained Pro [USER GUIDE]
Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
14
7.
Evaluation Board/kit Important Notice
This evaluation board/kit is intended for use for FURTHER ENGINEERING, DEVELOPMENT,
DEMONSTRATION, OR EVALUATION PURPOSES ONLY. It is not a finished product and may not
(yet) comply with some or any technical or legal requirements that are applicable to finished products,
including, without limitation, directives regarding electromagnetic compatibility, recycling (WEEE), FCC,
CE or UL (except as may be otherwise noted on the board/kit). Atmel supplied this board/kit "AS IS,"
without any warranties, with all faults, at the buyer's and further users' sole risk. The user assumes all
responsibility and liability for proper and safe handling of the goods. Further, the user indemnifies Atmel
from all claims arising from the handling or use of the goods. Due to the open construction of the
product, it is the user's responsibility to take any and all appropriate precautions with regard to
electrostatic discharge and any other technical or legal concerns.
EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER USER NOR ATMEL
SHALL BE LIABLE TO EACH OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES.
No license is granted under any patent right or other intellectual property right of Atmel covering or
relating to any machine, process, or combination in which such Atmel products or services might be or
are used.
Mailing Address:
Atmel Corporation
1600 Technology Drive
San Jose, CA 95110
USA
Atmel Touch SLCD1 Xplained Pro [USER GUIDE]
Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
15
Atmel Corporation
©
1600 Technology Drive, San Jose, CA 95110 USA
T: (+1)(408) 441.0311
F: (+1)(408) 436.4200
|
www.atmel.com
2015 Atmel Corporation. / Rev.: Atmel-42558A-Touch-SLCD1-Xplained-Pro_User Guide-12/2015
®
®
®
®
Atmel , Atmel logo and combinations thereof, Enabling Unlimited Possibilities , AVR , QTouch , and others are registered trademarks or trademarks of Atmel
®
®
®
®
Corporation in U.S. and other countries. ARM , ARM Connected logo and others are the registered trademarks or trademarks of ARM Ltd. Microsoft , Windows ,
®
and Windows Vista are registered trademarks of Microsoft Corporation in U.S. and or other countries. Other terms and product names may be trademarks of others.
DISCLAIMER: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND
CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED
OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this
document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to
update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive
applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
SAFETY-CRITICAL, MILITARY, AND AUTOMOTIVE APPLICATIONS DISCLAIMER: Atmel products are not designed for and will not be used in connection with any
applications where the failure of such products would reasonably be expected to result in significant personal injury or death (“Safety-Critical Applications”) without
an Atmel officer's specific written consent. Safety-Critical Applications include, without limitation, life support devices and systems, equipment or systems for the
operation of nuclear facilities and weapons systems. Atmel products are not designed nor intended for use in military or aerospace applications or environments
unless specifically designated by Atmel as military-grade. Atmel products are not designed nor intended for use in automotive applications unless specifically
designated by Atmel as automotive-grade.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement