Radiodetection 50AG, 100AG Smart Interrupter User guide

Below you will find brief information for Smart Interrupter 50AG, Smart Interrupter 100AG. The Smart Interrupter provides a means of placing a characteristic signature on pipes by interrupting the flow of cathodic protection (CP) current. It is specifically designed for use with the Radiodetection Stray Current Mapper (SCM) and Pipeline Current Mapper (PCM+) but can also be used as a stand-alone interrupter.

PDF Download
Document
Smart Interrupter 50AG, Smart Interrupter 100AG User Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Interrupts cathodic protection current
  • Provides signature on pipes
  • Operates from CP supply or external power
  • Can be used with SCM and PCM+
  • Stand-alone interrupter mode
  • Adjustable switching patterns
  • Master/Slave synchronization
  • GPS synchronization option
  • IP56 environmental rating
  • Operates in wide temperature range

Frequently asked questions

The Smart Interrupter is designed to place a characteristic signature on pipes by interrupting the flow of cathodic protection (CP) current.

The Smart Interrupter is specifically designed for use with the Radiodetection Stray Current Mapper (SCM) and Pipeline Current Mapper (PCM+), but it can also be used as a stand-alone interrupter.

The Smart Interrupter can be powered by an external power supply or from the CP supply (if above 5V).

The batteries (2 x 1.5V D cells) provide approximately 300 hours of operation at 20°C.

The Smart Interrupter can operate in temperatures ranging from 14°F (-20°C) to 140°F (60°C).
Preparing document for printing…
0%