Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
1
ES330 IP PHONE User Manual Escene Communication Technology Co.Ltd
www.escene.hk
Escene Communication
1
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
2
Tables of Contents
1.Getting Started.................................................................................................................4
About.........................................................................................................................4
Feature Highlights:......................................................................................................4
Technical Features .......................................................................................................4
2.Connecting Your Phone ....................................................................................................6
3.Phone overview ...............................................................................................................8
Understanding Buttons and Hardware ............................................................................8
Understanding Phone Screen Features.......................................................................... 11
4.Basic Call Handling ....................................................................................................... 12
Placing a Call............................................................................................................ 12
Answering a Call....................................................................................................... 13
Ending a Call ............................................................................................................ 14
Using Hold and Resume (Switch Calling Line).............................................................. 14
Transferring Calls ...................................................................................................... 15
Using Mute............................................................................................................... 16
Do Not Disturb.......................................................................................................... 16
3-way Conference...................................................................................................... 17
5.Advanced Call Handling ................................................................................................. 18
Speed Dialing ........................................................................................................... 18
Using the phone book................................................................................................. 18
Using Call Logs ........................................................................................................ 21
6.Keypad Instruction......................................................................................................... 23
Language.................................................................................................................. 23
SIP Account Settings.................................................................................................. 23
Network Setting ........................................................................................................ 24
Customizing Rings and Volume ................................................................................... 25
7.Web Settings ................................................................................................................. 27
Config Guide ............................................................................................................ 27
Network................................................................................................................... 29
SISIP AcP Account.................................................................................................... 30
SIP Account.............................................................................................................. 30
SIP Account.............................................................................................................. 30
SIP Account.............................................................................................................. 30
Programmable Keys ................................................................................................... 32
Expansion Module ..................................................................................................... 32
Audio ....................................................................................................................... 33
PhoneBook ............................................................................................................... 34
Group ............................................................................................................... 34
Contact ............................................................................................................. 35
BanList ............................................................................................................. 36
Enterprise Phonebook ......................................................................................... 36
Advance................................................................................................................... 37
www.escene.hk
Escene Communication
2
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
3
Phone Setting..................................................................................................... 37
VLAN Setting .................................................................................................... 39
VPN Setting....................................................................................................... 39
Dial Plan setting ................................................................................................. 40
Global SIP......................................................................................................... 41
PasswordPhone Maintenance ...................................................................................... 42
Log................................................................................................................... 42
Default Setting ................................................................................................... 43
Auto Provision ................................................................................................... 43
FTP Upgrade...................................................................................................... 45
TFTP Upgrade ................................................................................................... 46
HTTP Upgrade ................................................................................................... 47
Reboot .............................................................................................................. 47
Phone Status ............................................................................................................. 48
About....................................................................................................................... 49
Appendix: .............................................................................................................. 50
www.escene.hk
Escene Communication
3
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
4
1.Getting Started
About
ES330 is a small-screen-based IP phone in Sayhi IP phone series, it has fashion and
technological appearance, excellent voice quality, and powerful features, and it is a new
generation of intelligent phones to replace of the traditional desktop office terminals, It
accomplished the powerful telephony features by cooperating with the communications platform,.
such as the call transfer, hotline, three-party conference calling, speed dial, voice mail, Do Not
Disturb, etc.
Feature Highlights:
l
l
l
l
l
l
l
l
128*64 Pixel LCD with Support Chinese display
HD Voice: HD Codec
2 VoIP accounts
Enterprise Phone Book
12 programmable hard keys and support BLF
Expansion Module: Up to 6 EMS32 programmable key modules
Support Plug and Play
Support PoE and AC power adapter
Technical Features
Item
Screen
Line
ES330
Grayscale LCD with background light
128*64 pixel
3
Function Keys
4 Soft keys,2 Line keys(dual-color LED)
6 Navigation keys(arrow button, OK button, C button)
Volume adjust, Hands-free, Mute, Headset, Message,
Menu, Directory, Service, Hold, Redial, Conference, Transfer
VoIP Protocol
Network
Protocol
SIP 2.0
HTTP, BOOTP, TFTP, *IEEE 802.1Q, *IEEE 802.1X
Codec
QoS
G.723.1, G.729 A, G.711 A/U, G.722
TOS, Jiffer Buffer, VAD, CNG, G.168 (32ms)
www.escene.hk
Escene Communication
4
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
5
Network
2*RJ45 10/100M Ethernet interfaces(LAN/PC)
IP Assignment: Static IP or DHCP
VPN(L2TP)
DNS Clients (Primary and Secondary)
Conversation
Mode
Handset, Headset or Hand-free Mode,
Call center headset and 3.5mm headset supported
9-levels volume adjustment
Call Processing
Call Sharing/Bridged Lines
Line Status Indicator(dual color LED)
Multi Account
Call Waiting, Call Queuing, Line Switching
Call Forward, Call Transfer, Call Holding, Call Pickup,
Callback One Key Dial, Redial
Phone directory speed dial, Call record direct dial
3-way conference
DnD
Voice mail, Voice Prompt, Voice Message
BLF
EXT: ESM32 programmable key module
SOR: FXS, FXO, Record
USB
User Authentication for configuration pages
Signaling encryption
Media encryption
Expansion
Interface
Security
Application
*Public phone directory
Private phone directory
*PnP (Plug & Play)
Power Supply
Power adapter: AC 100-240V input and DC 12V/1A output
PoE (IEEE 802.af)
Storage Temperature: 0℃-60℃
Specification
Operating Humidity: 10%-90%
Size 254mm*205mm*87mm
www.escene.hk
Escene Communication
5
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
6
2.Connecting Your Phone
Your system administrator will likely connect your new SayHi ES330 IP Phone to the corporate IP
telephony network. If that is not the case, refer to the graphic and table below to connect your
phone.
1) Open the box ES330 IP Phone; carefully check the packing list, Packing List as follows:
Item
IP Phone
Counts
1
Handset
Handset Cord
1
1
Power adapter
RJ45 cable
1
1
CD
Quick Installation
1
1
Quick User Guide
1
Product certification 1
2) As shown in figure 2.1 and figure 2.2, Please plug Handset Cord into RJ11 interface(IP
Phone and Handset), RJ45 cable into the LAN interface;IP Phone will automatically start if IP
Phone with POE function.
3) The phone must work together with power adapter without POE support.
4) Connect your computer to PC interface of the phone with cable.
* More detailed description please refers to the 3.Phone overview-Understanding phone
buttons and hardware.
Figure 2.1 Interfaces of SayHi ES330
www.escene.hk
Escene Communication
6
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
7
Figure 2.2 Footstand of ES330
5) If you want to connect a ESM (Expansion Module), you could connect it (any interface) to the
EXT interface on the phone with a RJ-45 cable (a straight-through cable), and the second ESM
can be connected to the first one too. It supports 6 ESMs. www.escene.hk
Escene Communication
7
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
8
3.Phone overview
Understanding Buttons and Hardware
From figure 3.1 to figure 3.2, you can understand buttons and hardware about SayHi ES330.
Figure 3.1 Buttons and Hardware of SayHi ES330
Num
Buttons
1
Description
Headset button: Toggles the headset on or off.
Red means the feature is enabled.
2
Mute button: Toggles the Mute feature on or off.
Red means the feature is enabled.
3
Messages button: Typically auto-dials your voice message service.
Red means have unread voice mail.
www.escene.hk
Escene Communication
8
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
9
4
SERVICE
Server button: Open or Close the Services menu.
5
DIRECTORIES
Directory button: Use it to access call logs and corporate
directories.
6
MENU
7
Menu button: Allows you to scroll through menus.
Volume button: Controls the volume and other settings.
8
CONFERENCE
Conference button: Connect calling / called party to the conference
9
REDIAL
Redial button: To Redial the last number.
10
TRANSFER
Transfer button: Transfer redirects a connected.
11
HOLD
Hold button: Put a call on hold
12
0-9, *, #
Basic Call Handling: press “#”send out a call(default)
13
Speaker button
Speaker button: Toggles the speakerphone on or off.
Red, steady: Pick up and enter normal call.
14
Softkey
Each displays a softkey function, To activate a softkey, press the
softkey button.
15
Line buttons
Select the phone line(Call or Answer) ;
Different colors for different status:
16
1)
Red, flashing: There is an incoming call.
2)
Red, steady: Pick up and enter normal call.
3)
Yellow-green, flashing: Holding call.
4)
Yellow-green, steady: Active call.
Programmable
Hotline number can be used to bind in order to achieve speed dial;
Buttons
Turn on BLF:
1)
Red, steady: Remote line is busying.
2)
Yellow-green, steady: Remote line is idle.
The order of the hot keys :
On the left top to bottom: 1, 2, 3, 4, 5, 6;
On the right top to bottom: 7, 8, 9, 10, 11, 12;
www.escene.hk
Escene Communication
9
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
10
17
C
Back button: Return to the standby interface;
18
Navigation
“Up”: Adjust ring volume, operate with the “down”button
button
“Down”: Open ‘Missed Calls”list:
“Left”: Open “Received Calls”list;
“Right”: Open “Dialed Numbers”list
19
OK
OK button: To confirm the action;
20
Hands-free
Hands-free voice of the output
speakerphone
21
LCD screen
22
Light strip
160*32 pixels, grayscale LCD with background light.
Red flashing: There are incoming call;
Red, steady: Missed Calls, or phone busy;
23
Hands-free
Sounds input when hands-free
microphone
Figure 3.2 Interfaces of SayHi ES330
1
○
11
○
10
○
2
○
2
○
3
○
9
○
8 ○
6
○
7
○
Num
Hardware
4
○
5
○
functions
www.escene.hk 10
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
11
1
Footstand
Hold up phone
2
Footstand button
Press buttons at the same time to adjust the angle
3
Reserved for USB port
Enhanced scalability
4
Microphone port
Connect the Microphone
5
Headphone port
Connect the Headphone
6
Power port
12VDC
7
Headset port
Support RJ11 interface connection
8
Handset port
Connect the Handset
9
Reserved port
Enhanced scalability:
1) EXT: ESM interface;
2) SOR: S-FXS
O-FXO
R-record
10
LAN port
Connect to a LAN interconnecting device
11
PC port
Connect to a local PC
Understanding Phone Screen Features
This is what your main phone screen might look like:
Figure 3.3 LCD of SayHi ES330
1
○
2
○
3
○
4
○
5
○
Num
Screen
Functions
1
Time and Date
Show current time and date.
2
Auto-answer
Enabled Auto-answer, displays “AA”
3
Missed calls
Show the number of missed calls.
www.escene.hk 11
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
12
4
Line status
Show the phone line status:
1)
: Disconnect into network.
2)
: Only Peer-to-Peer call.
3)
: Network connected normal, but the line is not
successfully registered.
5
Softkey labels
4)
: Network is OK and the line is available.
5)
: Line is turned on DND.
Each displays a softkey function (displayed on your phone screen),
and the function is different when menu changes.
4.Basic Call Handling
You can perform basic call-handling tasks using a range of features and services. Feature
availability can vary; see your system administrator for more information.
Note: The bold type of the following text and following a “button”in table signifies the phone's
button (for example, OK button), and the
signifies softkey.
Placing a Call
Here are some easy ways to place a call on SayHi ES330 IP Phone:
If you want to...
Place a call using the
Then...
Pick up the handset
--1)
You can hear the dial tone;
handset
--2) The first line light is
Place a call using a Press Speaker,
--3) Enter a number;
speakerphone
or Programmable buttons
or
Place a call using a
Put on your headset and active
headset
Headset button, and then do as
;
--4) Press ‘#’button(default) ,
-or press
;
-or wait 5s (default), then it send
the number automatically.
using speakerphone
www.escene.hk 12
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
13
Redial
--Press REDIAL button to dial the last number
-or press Navigation button-Right > “Dialed number”, select a
number, and press
Dial from a call log
or OK button.
--1) Press MENU or OK button > “Call history”, you can select
“Missed calls”, “Received calls”and “Dialed numbers”,
- or press Navigation button (in Standby interface) > select “Missed
calls” (down), “Received calls” (left) and “Dialed numbers”
(right) );
--2) Then press OK button or
.
Place a call while
--1) Press Hold button or
Another call is active
--2) Enter a number;
--3) Press ‘#’button (default) ;
-or press
to send the number.
;
Tips
•You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, and then go
off-hook by lifting the handset or pressing
, Headset or Speaker button.
•If you make a mistake while dialing, press C button to erase digits.
Answering a Call
You can answer a call by simply lifting the handset, or you can use other options if they are
available on SayHi ES330.
If you want to...
Answer
with
Then...
a
handset
Answer with the
--1) Your phone ring;
--2) Line button of the ringing
line is Red
and flashing,
Light strip is Red
and flashing;
--Pick up the handset
--Press Speaker button
speakerphone
-or press the flashing
(Non-headset
-or press
Line button,
mode)
Answer with the a
headset
--Put on headset, press Headset button
so that the status light is Red
,
and then do as using speakerphone
www.escene.hk 13
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
14
Switch
from
a
--1) Another Line button is Red
connected Call to
answer a ringing
and flashing, Light strip is Red
and flashing;
--2) Press the flashing
call
Line button to answer (at this time, the original
call will be hold.)
Auto-answer
--1) Press MENU or OK button > “Function setting”> “Auto answer ”;
--2) Select “Enable ”;
--3) Your phone answers incoming calls automatically after a few rings .
Ending a Call
To end a call, hang up. Here are some more details.
If you want to...
Hang up while using the
Handset
Hang up while using the
Speakerphone
Then...
--Return the handset to its cradle,
-or press
--Press Speaker button that is Red
,
-or press Line button for the appropriate line,
-or press
Hang up while using the
Headset
--Press Handset button, (Do not keep the headset mode) ,
-or press
Hang up one call, but --Press
preserve another call on
(keep the headset mode)
,
-or refer to the above three methods
the other line
Using Hold and Resume (Switch Calling Line)
You can hold and resume calls. You can take a call in one line at anytime, and the other lines
would be hold. As a result of that, you can switch different calling line on our phone.
If you want to...
Then...
www.escene.hk 14
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
15
Put a call on hold
--Press HOLD button,
-or press
Hold a line and switch to
Press another Line button for the appropriate line
another line
Resume a call on current --Press HOLD button,
line
-or press
Release a call on different
Select the line want to release hold, press the line, so recovery;
line
Tips
•Engaging the Hold feature typically generates music or a beeping tone.
•A held call is indicated by the Yellow-green
and flashing Line button.
Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
If you want to...
Talk to the transfer
recipient
before
transferring a call
Then...
--1) Press TRANSFER button or press
;
--2) Enter number;
--3) press “#”(default) ,
-or press
(consult transfer)
then transfer the call,
-or wait five seconds(default)then transfer the call
Transferred
to
idle
--1) Press TRANSFER button or
;
lines or other numbers
--2) Press
;
without talking to the
transfer recipient
--3) Enter number;
--4) Press “#”(default)
(Blind transfer)
-or press
, then transfer the call;
-or wait five seconds(default)then transfer the call
www.escene.hk 15
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
16
Blind transfer to the
held line
--1) Press TRANSFER button or press
;
--2) Press the Line button of held line
Using Mute
With Mute enabled, you can hear other parties on a call but they cannot hear you. You can use
mute in conjunction with the handset, speakerphone, or a headset。
If you want to...
Then...
Toggle Mute on
Press Mute button, then the button is Red
Toggle Mute off
Press Mute button, then the button light off
Do Not Disturb
You can use the Do Not Disturb(DND) feature to block incoming calls on your phone with a busy
tone(Can also be set to their voice mail or other extension numbers, etc.).
If you want to...
Enable global DND
Then...
--1) Press
;
--2) All enabled line on the phone would changes to
status.
Enable DND on a
Press MENU or OK button > “Function setting”> “DND”> (select
single line
line) “Enable”
Disable DND
--Global DND enabled, press
--Line DND enabled, press twice
to disable global DND;
,
-or press MENU or OK button > “Function setting” > “DND”
>(select line) “Disable”
www.escene.hk 16
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
17
3-way Conference
You can establish a three-party conference, during the conversation three phone parties can
communicate with each other.
If you want to...
Invite
the
recipient
Then...
transfer
into
conference
in
--1)
a
When
the
transfer
recipient
CONFERCENCE button or
answer
the
call,
press
on your phone;
a --2) Then the held one, transfer recipient and you will be into a
transferring
conference, and the LCD will display
status.
Invite the third party --1) Press CONFERENCE button or
in an active call;
into a conference in a
--2) Enter the third party number;
active call
--3) After connected the third party, press CONFERENCE button or
again
establish a conference
--1) when one phone line is holding on and the other line is busy;
with held line
--2) Press CONFERENCE button,
-or Press
Soft key
--3) press the held line's programmable button, the 3-way Conference
will establish.
www.escene.hk 17
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
18
5.Advanced Call Handling
Speed Dialing
Speed dialing allows you to enter an index number, press a button, or select a phone screen item to
place a call.
If you want to...
Then…
Set up Speed Dials
--1) Press MENU or OK button > “Function setting”> “Hot line keys”;
on your phone
--2) You can configure twelve speed dial numbers on the SayHi ES330
IP Phone;
--3) Press OK button or
to set and modify:
-Mode:
-Speed dial: Speed dial mode
-Asterisk BLF: In the Speed dial based on the increase in BLF
(Busy line detection) function
-Account: Speed Dial hot keys using the account
-Name: Description of this hot-key,
-Number: Need to speed dial numbers
--4) Press
to save the changes
Using the phone book
You can store a large number of contacts in your phone's directory. You can add, edit, delete, dial,
or search for a contact in this directory.
If you want to…
Then…
www.escene.hk 18
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
19
Add Contacts
--1) Press
,
-or press MENU button > “Phone book”,
-or press Directories button > “Phone book”;
--2) Press
;
--3) Select “Add contact”, press OK button or
;
--4) Use the navigation keys to select content, press OK button or
to set and modify:
-Name: set the name of contact,
-NO.1-5: you can set up 5 contacts’numbers,
-Group: the contacts be divided into different user ’
s groups
--5) Press
Add group
--1) Press
soft key to complete
soft key,
-or press MENU button > “Phone book”,
-or press Directories button > “Phone book”;
--2) Press
soft key;
--3) Select the “add group”then press OK button or
;
--4) Use the navigation keys to select content, press OK button or
to set and modify:
-Group name: name of the group
-Description: description of the group
--5) Press
soft key to complete
www.escene.hk 19
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
20
Modify group
--1) Press
soft key,
-or press MENU button > “Phone book”,
-or press Directories button > “Phone book”;
--2) Press
soft key;
--3) Select the “Modify group” then press OK button or press
;
--4) Select the group you want to modify, press the OK button or
to set and modify, press
Delete group
--1) Press
to save the change
soft key,
-or press MENU button > “Phone book”,
-or press Directories button > “Phone book”;
--2) Press
soft key;
;
--3) Select the “Delete group”or OK button or
--4) Select a group you want to delete, press OK button or
View/Edit Contacts
--1) Press
soft key,
-or press MENU button > “Phone book”,
-or press Directories button > “Phone book”;
--2) Select “View ALL”,
-or select a contact who are belong to different group;
--3) Select the contact, press the OK button or
contact’s information, press OK button or
(to edit the
)
www.escene.hk 20
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
21
Call
from
phone --1) Press
book
soft key,
-or press MENU button > “Phone book”,
-or press Directories button > “Phone book”;
--2) Select “View ALL”,
-or select a contact who are belong to different group;
--3) Select a contact, then press
,
(If there are multiple numbers of one contact,
press
to
enter the interface of “call options”, select the one you want to call and
press
)
Modify the relative --1) Open your web browser, enter the “web”interface. (For details, you
account of a contact
can refer to 7.Web Settings.)
--2) Open “Contact”> “Phone book”, select the contact who are needed
to be modified, click
--3) Select the account in the drop-down column of the account, click
“Submit”to complete it.
Using Call Logs
Your phone maintains records of your missed, placed, and received calls.
If you want to…
Then…
View your call logs
--1) Press MENU button > “Call history”> “Missed Calls”, “Received
Calls”, or “Dialed numbers”
--2) Use the navigation keys to view the call record information.
Dial from a call log
Please refer to the previous part 4.Basic call handing –Placing a call.
Erase your call logs
--1) If you want to delete a call record, you have to select this record
from the logs and press
;
--2) If you want to delete an entire call record list, you have to select
this record list from the logs and press
www.escene.hk 21
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
22
Tips
•Each call log store up to 20 entries on SayHi ES330 IP phone.
www.escene.hk 22
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
23
6.Keypad Instruction
SayHi series IP phones are can be configured in two ways. The first you can use the phone keypad
where you can settings for you IP phones , the other you can log in to User Options web pages
where you can settings for you IP phones.
Use phone keypad to setting. Press MENU or OK button to the main menu, Use the navigation
keys to select menu, press OK button to confirm menu selections, press C button or
delete input information.
to
Language
SayHi ES330 IP Phone supports Simplified Chinese and English.
If you want to…
To change the
language via
Phone interface
Then...
--1) Choose “System setting”> “Phone setting”> “Language”;
--2) Scroll through the list of available languages .
--3) Press OK button or
when the desired language is
highlighted. The language appears on the graphic display will be changed
to the one you chose.
SIP Account Settings
SayHi ES330 series IP phone make calls based on sip accounts, SayHi ES330 series IP phones can
support 2 independent SIP account, each account can be configured to different SIP server.
If you want to…
Then...
www.escene.hk 23
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
24
Create an SIP account
--1) Choose “System setting”> “Advanced setting”;
--2) Enter the password required(The default is empty) ;
--3) Choose “SIP”> “Account sip”;
--4) Choose one of the account you want to setting, you can configure
the following parameters
-Enable account*: choose Enable
-Display Name: The name displayed on the screen
-User Name*: the account matched with the SIP server.(extension
number) ,
-Authen usr: the Authenticated users matched with the SIP server.
(The default With the same account)
-user pwd* : the user password matched with the SIP server
-Description: description of this account,
-SIP1*: the primary SIP server, By default all calls through the
server,
-SIP2: the secondary SIP , When the primary server is
unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum value is
20 The default value is 3600.
--5) Set up the above parameters, Press
softkey to saves
settings, Complete the account creation;
* Note: the parameters with the * mark must be set.
Disable sip account
--1) Choose “System setting”> “Advanced setting”;
--2) Enter the password required(The default is empty) ;
--3) Choose “SIP”> “Account sip”;
--4) Choose “Enable account”> “Disable ”;
--5) Press
soft key
Network Setting
www.escene.hk 24
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
25
If you want to …
network setting
Then…
--1) Choose “System setting”> “Advanced setting”;
--2) Enter the password required(The default is empty) ;
--3) Choose “Network”, you can configure the following parameters:
-Type: static IP or DHCP
-IP: enter IP address , Note: Do not duplicate the IP address with
other devices on the network
-Mask: enter appropriate subnet mask
-GW: enter appropriate gateway
- DNS1: enter IP address of the primary DNS server
- DNS2: enter IP address of the secondary DNS server
-Web port: the default Web port is 80,if you change it(for example
change it to 88),you must use IP and Web port to login the web page (for
example http://192.168.0.200:88).It will take effect on next reboot.
-Telnet port: the default Telnet port is 23,if you change it(for
example change it to 2003),you must use IP and Telnet port to login the
manage page (for example telnet 192.168.0.200:2003).It will take effect
on next reboot.
Customizing Rings and Volume
If you want to…
Then…
Change the ring --1) Choose “System setting”> “Phone setting”> “Ring type”;
tone
--2) Press navigation to choose ring tone;
--3) Press
Press
Press OK or
Press
softkey Choose a ring tone to play a sample of it.
softkey to Stop Playing
softkey to set the ring tone,
softkey to cancel
www.escene.hk 25
Escene Communication
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
26
Adjust the volume
--1) Choose “System setting”> “Phone setting”> “Volume setting”;
level
--2) You can adjust the volume level of following types
-Ring volume: Phone call ring volume,
-Handset volume: Handle output volume,
-Handset mic volume: Handle input volume,
-Speaker volume: Hands-free speaker output volume,
-Speaker mic volume: Hands-free input volume,
-Headset volume: Headphone output volume,
-Headset mic volume: Headset microphone input volume
www.escene.hk 26
Escene Communication
ES330 IPPhone
27
7.Web Settings
We can configure IP Phone more handy through web setting. Press OK button on the keypad of the
phone to enter the status page and find out the IP address of IP phone. Enter it (for example
http://192.168.0.200) into the address bar of web browser. The default login name and password
are both “root”.
Config Guide
You can finish the base configuration step-by-step by this guide.
www.escene.hk 27
Escene Communication
ES330 IPPhone
28
When press ‘next’,you can configure the Network parameters for the phone,You can chose other
option,such as static IP or PPPoE.
After config the network parameter,press next,then you can config sip account for the phone.
www.escene.hk 28
Escene Communication
ES330 IPPhone
29
Press Finish,the base configuration of the phone is complete,now you can use the phone to call
with sip.
Network
You can config the network parameters for the phone on the web page.
Choose network,you will find the following parameters:
www.escene.hk 29
Escene Communication
ES330 IPPhone
30
Field
DHCP
Description
Config the phone get ip info from DHCP server
IP Address
Config the ip manual for phone
Netmask
Config the netmask manual for phone
Gateway
Config the gateway manual for phone
Username (pppoe)
The pppoe username
Password (pppoe)
MTU (pppoe)
The pppoe password
The mtu for pppoe,default is 1500
Primary DNS
The primary DNS server
Secondary
The secondary DNS server
MAC Address
Display the MAC of the phone
HTTP Port
The default web port is 80,if you change it(for example change it to88),
You must use IP and Web port to login the web page(for example
http://192.168.0.200:88). It will take effect on next reboot.
Telnet Port
the default Telnet port is 23,if you change it(for example change it to
2003),you must use IP and Telnet port to login the manage page (for
example telnet 192.168.0.200:2003).It will take effect on next reboot.
SIP Account
The phone attempts to register to the SIP server using the account/registrar data provided by the
automatic or manual initialization
www.escene.hk 30
Escene Communication
ES330 IPPhone
31
Choose one Account, you will find the following parameters:
Field
Enable
Description
You can choose on/off to enable/disable the line.
Account Mode
You can choose VOIP/PSTN,when you want to use as PSTN,you should
select PSTN and plug the RJ-11 phone line into the SOR port of the
phone.
Display Name
It is showed as Caller ID when making a phone call
Username
It is a username provide by SIP Server
Authenticate Name
It is authenticated ID for authentication
Password
It is a password provide by SIP Server
SIP Server
Server for registration, provided by administrator
Register Expire Time
IP phone automatically registered every time
Amount Of Line
Account Used
The line key of account used,default is 2
www.escene.hk 31
Escene Communication
ES330 IPPhone
32
Choose one Account, you will find the following parameters:
Programmable Keys
Choose Programmable Keys,you will find the following parameters:
Field
Description
Speed Dial(Mode)
Use specific Key as Speed Dial key
Asterisk BLF(Mode)
Use specific Key as BLF key
Speed Dial Prefix(Mode) Use specific Key as Speed Dial Prefix key
DTMF
Asterisk BLA
Use specific Key as DTMF key
Use specific Key as BLA key
Expansion Module Expansion module is extended Hotline function; you can believe it support more hotline by
using Expansion module. You can refer to 2.Connecting Your Phone about connecting of
Expansion module.
After connecting Expansion module to a phone, you can install it as follow:
www.escene.hk 32
Escene Communication
ES330 IPPhone
33
1) Click “Expansion Module”, select a module that you install (the one you connect to IP phone
directly is Module1, the one connect to Module1 is Module2, and so on) and click “Set”.
2) After installing, you can set parameters of each Extension as follow:
Expansion module
Key n
Mode
Each Expansion module supports 32 keys.
Name
Five modes:
--Speed Dial: Enable speed dialing in this key;
--Asterisk BLF: Enable BLF in this key;
--Speed Dial Prefix
--DTMF
--Asterisk BLA
A SIP account relates to this key, another word, you will call this
hotline by this SIP account.
Description of this hotline.
Number
Number relates to this key.
Account
*Regarding the settings of Expansion module, please confirm the model of your phone is
DS3xx_E/DS3xx_PE.
Audio
The IP phone supports the following voic e codecs: G.722, G.711A, G.711U, G.723, and G.729A.
You can enable/disable the desired codecs via Web interface. Please contact your system
administrator for more details about the codecs.
www.escene.hk 33
Escene Communication
ES330 IPPhone
34
To enable/disable the codecs:
1) Choose Audio-> Audio Codecs
2) Use the navigation keys to highlight the desired one in the Enabled/Disable Codecs list, and press
the
/
to move to the other list.
3) Choose Submit to save the change.
Of course, you can control the voice bulk in this choose.
PhoneBook
Group
www.escene.hk 34
Escene Communication
ES330 IPPhone
35
You can add, edit and delete group in a phone book on web page of ES330.
1) Click “PhoneBook”> “Group”,
If you want to add a Group, you just ought to click ‘Add Group’.
You can edit an existed Group by click .
You can delete an existed Group by click , if you want to delete all Groups, you just ought to
click ’Delete All Group’.
2) When you add a group or edit an existed group, you can set several parameters as follow:
Group
ID
Serial number of a group
Description
Group Name
Description of a group
Name of a group
Contact
You can add, edit and delete contact in a phone book on web page of ES330.
The phonebook can storage 300 contact entry.
1) Click “PhoneBook”> “Contact”,
If you want to add a Group, you just ought to click ‘Add Contact’.
You can edit an existed Contact by click .
You can delete an existed Contact by click , if you want to delete all Contacts, you just ought
to click ’Delete All Contact’.
2) When you add a Contact or edit an existed Contact, you can set several parameters as follow:
Contact
Serial Number
Serial number of a contact
www.escene.hk 35
Escene Communication
ES330 IPPhone
36
First Name
Last Name
The First Name of a contact
The Last Name of a contact
Mobile Number
Office Number
The Number1 phone number of a contact
The Number2 phone number of a contact
OtherNumber
Group
The Number3 phone number of a contact
You can assign a contact to a specific group. If there isn’t any group set
on the phone, the group is None by default.
Account
Select a SIP account relating this contact, that is you can dial to the
contact from this SIP account.
BanList
You can add, edit and delete banlist in a phone book on web page of ES330.
1) Click “PhoneBook”> “BanList”,
If you want to add a BanList, you just ought to click ‘Add BanList’.
You can edit an existed BanList by click .
You can delete an existed BanList by click , if you want to delete all BanLists, you just ought
to click ’Delete All BanList’.
2) When you add a BanList or edit an existed BanList, you can set several parameters as follow:
BanList
Serial Number
Serial number of a BanList
Description
First Name
Last Name
Description of a BanList
The First Name of a ban contact
The Last Name of a ban contact
Mobile Number
Home Number
The number1 phone number of a ban contact
The number2 phone number of a ban contact
Office Number
Account
The number3 phone number of a ban contact
Select a SIP account relating this ban contact, that is the ban contact
can’t dial to this SIP account.
Enterprise Phonebook
www.escene.hk 36
Escene Communication
ES330 IPPhone
37
You can download Enterprise Phonebook from this web interface. But you should do second
develop on the sip server to enable this function completely.
If the sip server no add some function to hold this option ,this option can be userd.
Advance
Phone Setting
You can use phone setting to set the time,qos,port Mirroring for the phone.
www.escene.hk 37
Escene Communication
ES330 IPPhone
38
When used Phone Setting option,you can set several parameters as follow:
Phone Setting
DTMF
The DTMF transmitted mode,include RFC 2833,Inband,SIP Info
BackLight
The backlight of the phone LCD
Set Time Mode
The
mode
of
set
Server/PSTN/Manual
Daylight
Saving
Time
Time Format
Enable/disable the DST for the phone
Time Zone-GMT
Manual Setting
You can select different time zone for the phone
This used to manual set time for the phone
QoS
Network
Mirroring
time
for
phone,include
SNTP/SIP
You can use 24 hour time format or 12 hour time format
The qos priority,support diff-serv and precedence
Packet When select on,then you can capture the phone’s packet use notebook
which connect to pc port of the phone
www.escene.hk 38
Escene Communication
ES330 IPPhone
39
VLAN Setting
You can add the phone and PC to different VLAN used VLAN Setting option.
When used VLAN Setting option,you can set several parameters as follow:
VLAN Setting
Enable VLAN
You can enable/disable vlan for phone and pc
VID
The vlan you want the phone or pc to join
VPN Setting
IF you need to serup a VPN Setting, you shoule fill below options.
When used VPN Setting option,you can set several parameters as follow:
VLAN Setting
www.escene.hk 39
Escene Communication
ES330 IPPhone
40
Enable VPN
You can enable/disable VPN for phone and pc
VPN Type:
There is one choose you can choice.
VPN Server Addr
VPN server'ip
VPN User Name
VPN iser's name
VPN User Name
A password be userd foe authentication
Dial Plan setting
If you want to setup a dial plan, you can click "Dial Plan".
Click "add rule" to entry this interface.
www.escene.hk 40
Escene Communication
ES330 IPPhone
41
Dial Plan Setting
ID
Dial Plan ID
IP
The ip of a phone which you want to call
prefix
The number which you need to press actually if you want to call the
phone
Called
Number
Insert There have two option, Enable or Disable.
Position
Which position you want insert the number
Number
Waht number you want to insert
Called
Number
Delete There have two option, Enable or Disable.
Tips
(Note: When you want to add code and delete at the same time, you can add code first, after that
base on the number you add, decide the position and length of the delete code.)
Global SIP
You also can setup the SIP server on Global SIP.
ial Plan
www.escene.hk 41
Escene Communication
ES330 IPPhone
42
PasswordPhone Maintenance
Log
If you need to catch a debuging Level, you need setup on this interface.
You can change the password used to login phone GUI in Password option.
www.escene.hk 42
Escene Communication
ES330 IPPhone
43
In Password option, you can set several parameters as follow:
Password
Username
The login username of the web page
Old Password
New Password
Confirm Password
The old password used to login of the web page
The new password used to login of the web page
The new password used to login of the web page
Administrator
User
Login phone web page used administrator privileged
Login phone web page used general user privileged
Default Setting
You can load the phone to the factory default setting in default setting option.
Press the ‘Reset to Factory Setting’option,the phone will load to factory default setting on next
reboot.
Auto Provision
when you open the auto provision function,the phone will auto provision if the phone detect a
higher software or kernel which are put on the software server .the detail information about auto
provision you can see the appendix.
www.escene.hk 43
Escene Communication
ES330 IPPhone
44
When use auto provision, you can set several parameters as follow:
Auto Provision
Auto Provision
You can enable/disable auto provision by select on/off
Protocol
Software
URL
Username
The username provide by provision server
The protocol use for auto provision,it include tftp/http/ftp
Server The server address of the auto provision
Password
The password provide by provision server
Auto
Download This used to auto download software from server
Software
Auto
Download This used to auto download kernel from server
Kernel
Auto
Download This used to auto download config file from server
Config File
Broadsoft
Compatiblity
This used to compatible the broadsoft format’
s config file
www.escene.hk 44
Escene Communication
ES330 IPPhone
45
Auto
Download This used to auto download expansion’s config from server
Expension
Auto
Download This used to auto download enterprise phone from server
Enterprise
Phonebook
Auto
Download This used to auto download personal phonebook from server
Personal Phonebook
Booting Checked
This used to checked the auto provision when phone booting
Auto
Provision
Freqency
Auto Provision Time
This used to set the time interval for auto provision
AES Enable
AES Key
You can enable/disable AES encrypt for auto provision
The key of the AES
Auto Provision Now
This used to do auto provision immediately
This used to the specific time for auto provision
FTP Upgrade
You can upgrade the software,kernel and configure file for the phone use ftp.
When use ftp upgrade, you can set several parameters as follow:
FTP Upgrade
Server IP
Filename
The ip address of the ftp server
The name of the file want to download from ftp server
www.escene.hk 45
Escene Communication
ES330 IPPhone
46
Username
Password
The username provide by ftp server
The password provide by ftp server
Software Upgrade
Kernel Upgrade
Used to upgrade the software of the phone
Used to upgrade the kernel of the phone
Configuration
You can used update/backup to update/backup the configure file of the
phone
You can used update/backup to update/backup the phonebook of the
phone
You can used update/backup to update/backup the expansion of the
phone
Phone Book
EXT Module
TFTP Upgrade
You can upgrade the software,kernel and configure file for the phone use tftp.
When use tftp upgrade, you can set several parameters as follow:
TFTP Upgrade
Server IP
The ip address of the tftp server
Filename
Software Upgrade
The name of the file want to download from ftp server
Used to upgrade the software of the phone
Kernel Upgrade
Configuration
Used to upgrade the kernel of the phone
You can used update/backup to update/backup the configure file of the
phone
You can used update/backup to update/backup the phonebook of the
phone
Phone Book
EXT Module
You can used update/backup to update/backup the expansion of the
phone
www.escene.hk 46
Escene Communication
ES330 IPPhone
47
HTTP Upgrade
You can upgrade the software,kernel and configure file for the phone use http.
When use http upgrade, you can set several parameters as follow:
HTTP Upgrade
Select a File
Browse the software/kernel/config file you want to upgrade from http
Software Upgrade
Kernel Upgrade
Used to upgrade the software of the phone
Used to upgrade the kernel of the phone
Configuration
You can used upload/download to upload/download the configure file
of the phone
You can used upload/download to upload/download the phonebook of
the phone
You can used update/backup to update/backup the expansion of the
phone
Phone Book
EXT Module
Reboot
You can use reboot option to reboot the phone.
www.escene.hk 47
Escene Communication
ES330 IPPhone
48
When you press ‘Reboot’,the phone will reboot.
Phone Status
You can see the currently status of the phone when use Phone Status option.
www.escene.hk 48
Escene Communication
ES330 IPPhone
49
About
You can see the phone model when used About option.
Attention:
On this interface ,you can see the software and kernel which we used for test and this user_manual
is written base on this software and kernel.
This software version is V2.1.8.4-1570
This kernel version is v2.2.3
www.escene.hk 49
Escene Communication
ES330 IPPhone
50
Appendix:
Auto Provision
Pre-configuration on TFTP/HTTP/HTTPS/FTP Server
When the software or kernel auto-provision is enabled and want to run, IP Phone will
check the software and kernel version at first, so we need make some
pre-configuration on the provisioning server.
Auto Provision for Software:
1. Create a notepad file named“F000X00.cfg”(the “X”is decided by the model of
the IP phone you are using, for example, if the model is ES620, the file name is
“F000600.cfg”);
*Named rule of the file:
F00600.cfg: for ES620, ES610 and DS622;
F00400.cfg: for ES410 and DS412;
F00300.cfg: for ES310 and DS312;
F00200.cfg: for ES210 and DS212.
2. Open the notepad file “F000X00.cfg”and write the new software name in it, for
example,
S_ES6xx_version2.0.4.6: for ES620, ES610 and DS622;
S_ES410_version2.0.4.6: for ES410 and DS412;
S_ES310_version2.0.4.6: for ES310 and DS312;
S_ES210_version2.0.4.6: for ES210 and DS212
Write down the new version you want to upgrade and save it on your
provisioning server.
*Please note that if the version is not older than (and same as) the one on your phone,
auto-provision of your software would be not available.
3. After it, upload the new software to the TFTP/HTTP/HTTPS/FTP provisioning
server and complete the pre-configuration steps.
Auto Provision for Kernel:
1. Create a notepad file named“K000X00.cfg”(the “X”is decided by the model of
the IP phone you are using, for example, if the model is ES620, the file name is
“K000600.cfg”);
*Named rule of the file:
K00600.cfg: for ES620, ES610 and DS622;
K00400.cfg: for ES410 and DS412;
K00300.cfg: for ES310 and DS312;
K00200.cfg: for ES210 and DS212.
2. Open the notepad file “K000X00.cfg”and write the new kernel name in it, for
example,
K_uImage_600.bin_version2.1.6: for ES620, ES610 and DS622;
www.escene.hk 50
Escene Communication
ES330 IPPhone
51
K_uImage_400.bin_version2.1.6: for ES410 and DS412;
K_uImage_300.bin_version2.1.6: for ES310 and DS312;
K_uImage_200.bin_version2.1.6: for ES210 and DS212
Write the new version you want to upgrade and save it on your provisioning
server.
*Please note that if the version is not older than (and same as) the one on your phone,
auto-provision of your kernel would be not available.
3. After it, upload the new kernel to the TFTP/HTTP/HTTPS/FTP provisioning
server and complete the pre-configuration steps.
Configuration files on TFTP/HTTP/HTTPS/FTP Server
Name of configuration file:
The configuration file on the provisioning server is named as the MAC address of IP
phone itself. Escene ’
s IP phones support two different configuration files for
auto-provision:
1. Normal Configuration file:
Normal Configuration file is the configuration file of your Escene IP phone. You can
download it from your phone (You can see the following chapter to see how to
download a configuration file from Escene IP hone) and modify by yourself. If the IP
phone’
s MAC address is 00:11:22:33:44:55, the normal configuration file of it should
be 001122334455.xml.
l
2. Broadsoft Configuration files:
Broadsoft Configuration files support the format of Broadsoft IP-PBX. However, you
can use them for provisioning. There are two files should be set on your provisioning
server, they are also named by the MAC address of your phone
1) 001122334455.cfg: a configuration file for system settings, for example,
network, audio and so on.
2) 001122334455.txt: a configuration file for SIP accounts.
Download a configuration file from your phone:
You can download a configuration file from your phone by HTTP as follow:
1. Open the web page of your IP phone, click “Phone Maintenance”>“HTTP
Upgrade”;
2. Then click “Download”of Configuration:
l
www.escene.hk 51
Escene Communication
ES330 IPPhone
52
3. If you want to use this file to auto-provision, you just need to modify it by
yourself and rename it to the MAC address of your IP Phone with .xml suffix.
Extern.xml file on TFTP/HTTP/HTTPS/FTP Server
The Extern.xml includes the settings of programmable buttons on the phone and all
Expansion Modules. All the phones can download the settings from a same file and
they will have the same settings (for example, Speed-dial, BLF and so on).
*You can’
t rename the file on the provisioning server. The file name is fixed to
Account1_Extern.xml.(Account1 is the first account you register)
Phonebook on TFTP/HTTP/HTTPS/FTP Server
Escene IP phone supports Enterprise Phonebook and Personal Phonebook.
l
Enterprise Phonebook:
Enterprise Phonebook is used for all staffs in your office. All phones will download a
common phonebook for all staffs. The file’
s name must be
Enterprise_Phonebook.xml on your provisioning server and you can not rename it.
l
Personal Phonebook:
Personal Phonebook is individual for each IP phone. The file on your provisioning
server is named by the first account of your IP phone. If the IP phone’s first account is
1287, the Personal Phonebook of this phone is 1287_Phonebook.xml.
Automatic Provisioning using DHCP Option 66
The following steps will descript auto-provision by TFTP. You also can use HTTP
and FTP for auto-provision with our phones.
DHCP Server: (Microsoft Windows 2003 server)
www.escene.hk 52
Escene Communication
ES330 IPPhone
53
1.
2.
3.
4.
5.
Start up the “DHCP Management Console”;
Expand the DHCP scope which will contain the phones
Right-click on the “Scope Options”node
Select “Configure Options”
In the “General”tab, scroll down the list of options and identify the option
labeled “066 Boot Server Host Name”
6. Enable the “066 Boot Server Host Name”and enter the string value according to
the examples discussed previously
string value:
192.168.0.201(TFTP Server IP Address);
7. Click the “OK”button
IP Phone:
1. Input the IP Phone’s IP Address in browser;
2. Enter user and password with “root”then open the web page;
3. Click “Phone Maintenance”and select “Auto Provision”;
4. Select like as follows:
5. Click “Submit”to save it.
Auto-Provision via fixable TFTP/HTTP/HTTPS/FTP Server
IP Phone:
1. Input the IP Phone’s IP Address in browser;
2. Enter user and password with “root”then open the web page;
3. Click “Phone Maintenance”and select “Auto Provision”;
4. select like as follows:
www.escene.hk 53
Escene Communication
ES330 IPPhone
54
It supports three protocols in Auto-Provision:TFTP,HTTP and FTP.
The format with provisioning server URL is:
TFTP:
TFTP://192.168.0.201(192.168.0.201 is the default Server IP address)
HTTP:
HTTP://192.168.0.201
HTTPS:
HTTPS://192.168.0.201
FTP:
FTP://192.168.0.201
Username: the user to login FTP/HTTP/HTTPS server
Password: the password of the user using to login FTP/HTTP/HTTPS server
*Username and password are available in FTP/HTTP/HTTPS only (unavailable in
TFTP).
www.escene.hk 54
Escene Communication
ES330 IPPhone
55
Auto Download Software:
Download software from server and upgrade it automatically.
Auto Download Kernel:
Download kernel from server and upgrade it automatically.
Auto Download Config File:
Download configuration file from server and update it automatically.
BroadsoftCompatibility:
If you select this function, you need to put two configuration files (with
Broadsoft format) on the provisioning server. Otherwise, you can download the
configuration file from your phone via HTTP (regarding the steps, you can refer to
“Download a configuration file from your phone” in this document.), modify it
and upload it to the server for auto-provision.
Auto Download Expansion:
Download configuration file of the Programmable buttons on your phone or
Expansion Modules automatically.
Auto Download Enterprise Phonebook:
Download Enterprise Phonebook from server and update it automatically.
Auto Download Personal Phonebook:
Download Personal Phonebook from server and update it automatically.
Booting Checked:
Check all items you had selected and upgrade/update them when the phone boot
Auto Provision Frequency:
The auto provision Frequency which you want.
Auto Provision Time:
The time you want to execute auto-provision.
Examples of Auto Provision Frequency and Time
1) When you set the Auto Provision Frequency and disable Auto Provision Time
(set to None), the Auto Provision function will work after the AutoProvision
Frequency;
2) When you set both Auto Provision Frequency and Auto Provision Time , for
example:
You set the AutoProvision Frequency to 24 hours, and the Auto Provision
Time to 2:00 at 8:00 today (1, Jan), it will pass 24 hours at first and work at the
nearest 2:00, it means that the Auto Provision function will work at 2:00 on the
day after tomorrow (3, Jan).
Therefore, if you want this function work at 23:00 tonight and it is 8:00 now, you
need to set the Auto Provision Frequency to 0 hours and the Auto Provision
Time to 23:00.
AES Encryption:
AES encryption is used for all the setting files of your phone (include configuration
file, Expansion file, Enterprise/Personal Phonebook etc. You just need to enable the
www.escene.hk 55
Escene Communication
ES330 IPPhone
56
AES Encryption function and input the AES Key matching the one on your server on.
----------------------------------------------------------------------------------------------------------------------
Escene Communi cation Technology Co.Ltd
Address: Floor 4,Building C,Yuean Industrial Park,Huangcun Road No.51,Tianhe
District,Guangzhou,China.
Postal Code: 510660
Tel: (+86)20-28096798
Fax: (+86)20-28096786
http://www.escene.hk
Technical Support:
E-mail: support@escene.cn
www.escene.hk 56
Escene Communication