MiNi IP Camera Quick User Guide - iZtouch

MiNi IP Camera Quick User Guide - iZtouch
Step1.
iztouch
Step3. Product connection
iztouch App Installation
MiNi IP Camera
Quick User Guide
Ready.Set.Go.
wireless
(avoid using 5G network as this model don’t support it)
“iztouch”
iztouch
Power on the Mini IP Camera.
iztouch
Speaker
Reset
IR Sensor
Lens
Reset
Micro SD card Slot
3-1, Power on the IP Camera
3-2, Press Reset button by the reset pin for a few seconds until hearing a cashier sound from the IPCam
3-3, Wait until you hearing continuous Di-Di-Di...sound from the camera
Microphone
iztouch
iztouch
DC 5V Power Slot
Step2. Register an App user account
Step4 view the camera on smart phone
Add device
IZSP-009
Name the device as your desired
here, such as: Office, Home...
Add new device
Your camera is offline.Please check camera
network connection
registered
email in 2-2
Speaker
Reset
IR Sensor
Lens
Reset
support@iztouch.com
Micro SD card Slot
Microphone
iztouch
Smart Wi-Fi Setting
DC 5V Power Slot
Note: You can find the device
ID from the label which sticked on
the camera.
Please design a
password for APP account,
pls don't input your email
password.
IZSP-009C
4-1
2-1
Add device
Add device
WIFI setting
2-2
Trouble shooting:
- If the IP camera can’t be found in step 4-5, please make sure you have done
step 3-2 to insert a pin to reset the IP camera and wait for 30 seconds.
sharing the same internet network. Or 2) the IP camera is too far from the
Input Wi-Fi Password
router if using WI-FI connection.
- If you fail to setup the WI-FI network in step 4-7, please make sure your phone
Next
is not connecting to a 5G WI-FI signal. You can resolve this issue by
Next
Note: This function is not stable under
Wi-Fi Network, suggest setting under
wired network
WIFI Setting..., Please wait...
reconnecting to a non-5G WI-FI signal on your phone
- If you want to reconnect the IP camera to a different internet network after
you successfully completed step 1 to 4, please remove the IP camera from
4-4
4-5
4-6
your app and go through step 3 to 4.
- For any other quality and setup issue, it is recommended you insert a pin
(until you hear a cashier sound) to reset the IP camera.
FAQ1: How to download and install the App “iztouch”.
FAQ2: Add new device on App “iztouch” failed(PT IP Camera).
FAQ3: How to set up the Email and Phone Push Alarm.
FAQ4: How to set up Wi-Fi for PT IP Camera.
FAQ5: How to view the camera on PC .
FAQ6: How to set up micro SD card record and check record playback.
please visit : www.iztouch.com
Wi-Fi Setting
office
WI-FI setting succeeded
Skip
Add new device
Modify Password
Note:one touch for
streaming
long touch for setting
Note: Please Creat
6-10 characters(0-9) for
your new password
4-7
4-8
Note: Touch This button for setting APP
“Authority, Multi-Media, System, Update,
Logout, Quit. ”
4-9
4-3
2-3
- If you experience inconsistent signal, it could be due to 1) too many devices
salestest
4-2
Note: Mini IP Camera
without Lan Port(RJ-45), So
after power on the camera, touch
“Smart Wi-Fi Setting” for
add new device
Customer Support
E-Mail support:support@iztouch.com
Website: http://www.iztouch.com
6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising