Audyssey | Wireless Speakers | P200 Player - by Legrand

P200 Player - by Legrand
Allowing for both wired and wireless setup, the P200 player provides the
ultimate installation flexibility while delivering 120 watts of musician-grade
audio from a near-infinite selection of streaming music to a single zone.
Ideal for reaching hard-to-wire rooms and easily expanding Player Portfolio
systems, this player blends performance and flexibility like never before.
P200 Player
800.223.4196 / 315.468.6211
Mastering-grade, high fidelity audio is delivered to every
area of your home, and kept perfectly in sync.
Compatible with NuVo’s other Player Portfolio products for a truly
custom, easily expandable system (up to sixteen zones).
Supports both wired ethernet and wireless 802.11n
configuration options adding flexibility for any home.
Includes the latest 802.11n wireless capability and utilization of both 2.4 and
5 Ghz bands offering the fastest signal and with the broadest coverage.
All your favorite music is right at your fingertips with easy
access to networked computers, streaming Internet Radio, and
even audio content stored on any Android or iOS device.
Connect to storage devices, analog equipment, or home theater
receivers through the unit’s audio line-in, line-out, or USB ports.
Connect any Bluetooth device, wirelessly, using the lossless
aptX™ Bluetooth feature, streaming audio from apps and
services on your personal device throughout your system.
World-renown Audyssey™ music technology optimizes
your listening experience with Dynamic Volume.
Wirelessly manage your music from the palm of your hand
with free apps for your Apple or Android device.
P200 Player
Input/Output Connectors
Line Input
1 - TRS 3.5 mm stereo jack
Line Output
1 - TRS 3.5 mm stereo jack
Setup Mic: (Audyssey)
1 - TS 3.5 mm stereo jack
Speaker Output 4 - Gold 5-way binding post
USB 2.0 Connection (Type A)1
Local Area Network (LAN)1 - RJ45
Supported Audio Formats
Music File (via USB or network)
Ogg Vorbis
Internet Radio:
IP Control
Network Connectivity
LAN (Wired Connection)
Wireless Connection
Apple iTouch®
Apple iPhone®
Apple iPad®
Android Mobile
Android Tablet
10/100base-t Ethernet
MIMO, 2 TX + 2 RX Channels
IEEE 802.11a/b/g/n
Amplifier Output
Rated Output Power (8 ohm)
120W (60W x 2)
Two channels driven 20 Hz
20 KHz @ 0.5% distortion
Rated Output Power (4 ohm)
120W (60W x 2)
Two channels driven 20 Hz
20 KHz @ 0.5% distortion
Rated Distortion (1/2 Power)
Speaker Impedance
4 – 8 ohms
Frequency Response (20 - 20kHz)
+/-0.5 dB
Damping Factor
Signal-to-Noise Ratio at rated output 92 dB A – weighted
800.223.4196 / 315.468.6211
Line Output:
Output Level
Output Impedance
Signal-to-Noise Ratio at rated output
Line Input:
Input Impedance
Input Overload Audio Processing
Audyssey Dynamic Volume™
Bass Equalization
Treble Equalization
Regulatory Approvals
Environmental Compliance
0-1000 mV RMS
5 Ohms
88 dB A – weighted
10 KOhms
2.3 V RMS
+/-12 dB range
+/-12 dB range
Power Requirements
Input Voltage
100 – 240VAC, 50/60 Hz
Power Consumption (max)
150 W
Power Consumption (typical – 1/8 audio power)
31 W
Operating Temperature
0° C to 40° C
Physical Specifications
Unit Size (mm)
Unit Size (inch)
Unit Weight (kg)
Unit Weight (pounds)
43 H x 247 W x 175 D
1.69 H x 9.72 W x 6.89 D
Shipping Specifications
Unit Size (mm)
Unit Size (inch)
Unit Weight (kg)
Unit Weight (pounds)
360 L x 240 W x 66 H
14.17 L x 9.45 W x 2.60 H
NuVo reserves the right to change specifications without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF