Safety Vision 70A Owner's Manual

OWNER'S MANUAL

PLEASE READ CAREFULLY BEFORE

USING AND KEEP IN A SAFE PLACE.

7" DIGITAL TFT LCD COLOR

ALL ROUND VISION MONITOR

(MULTIPLE DISPLAY MODE)

Model: SV-LCD70A

Design and Specifications are subject to change without notice.

r

OWNER'S RECORD

The model and serial numbers are located on the rear of the unit.

Record the serial number in the space provided below. Refer to these numbers whenever you call upon your dealer regarding this product.

Model No.

Serial No.

SV-LCD70A

WARNING

To avoid electric shock, do not open the cabinet. Refer servicing to qualified personnel only.

This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance.

You are cautioned that any changes or modifications which is not expressed or approved in this manual could void your warranty and cause the equipment to malfunction.

2

r

SUGGESTIONS

7" DIGITAL TFT LCD COLOR

ALL ROUND VISION MONITOR

Use only DC 10V ~ DC 32V.

If liquid or dust leaks into the case, turn off power to the unit and consult an

experienced technician before using.

Do not install the units in an extremely hot or humid place (radiator, air duct,

etc.) or in a place subject to direct sunlight, excessive dust, mechanical

vibration or shock. If your vehicle has been parked in direct sun light resulting

in a considerable rise in temperature inside the vehicle, allow the unit to cool

off before operating.

Clean the unit with a slightly damp soft cloth. Use a mild household detergent.

Never use strong solvents such as thinner or benzene as they might damage

the finish of the unit. r

FEATURES

SV-LCD70A (7" Digital TFT LCD Monitor)is especially designed as automotive all round vision system.

- High Resolution 7"Digital TFT LCD Panel

- Free Input Voltage (DC 10V~DC 32V)

- NTSC / PAL Compatibility

- 4 Camera Inputs (4-pin mini DIN)

- 1 A/V Input (RCA, For optional navigation or other external device)

- 1 A/V Output(RCA, For recording purpose or a second monitor)

- Multiple Display Mode (SPLIT2), Triple(SPLIT3), Quad(SPLIT4)

- Automatic Picture Display (5Triggering Functions)

- Day/Night sensor (CDS) for automatic day/night settings

- Individual settings of AUX-channel and camera channels

- OSD(On Screen Display)

- Auto Scanning Function

- Built-in Speaker

3

r

PACKAGE CONTENTS

Please check that you have the correct contents before using this product. If

any items are missing, please contact your dealer.

SV-70A MONITOR

SCREW KITS

SUN VISOR STAND BRACKET

OWNER'S MANUAL

PLEASE READ CAREFULLY BEFORE

USING AND KEEP IN A SAFE PLACE.

7" DIGITAL TFT LCD COLOR

ALL ROUND VISION MONITOR

(MULTIPLE DISPLAY MODE)

CABLE

REINFORCEMENT

Model: SV-LCD70A

Design and Specifications are subject to change without notice.

INSTRUCTION

MANUAL

CONTROL BOX

4

POWER CORD

r

OPERATIONS

4

5

6

1

2

3

POWER

-

/

+

UP / DOWN

SOURCE

MENU

DAY/NIGHT SENSOR

1

POWER (ON/OFF)

STAND-BY mode

1. When RED LED is turned on, it indicates the power is applied and

it is on stand/by mode.

2. The monitor is not turned off until the ignition key is at off position.

POWER-ON mode

1. Press to turn the monitor on.

2. Press to turn the monitor into stand-by.

2

NOTE

signal; For more information, see TRIGGER setting in the MAIN MENU.

2

- / +

+

1. Press to decrease speaker volume.

3

UP/DOWN

UP DN

* Available only when TILT camera is connected with TILT.MT setting on menu.

Use to search the lists in

menu setting mode .

4

SOURCE

SOURCE

5

(CAM1→CAM2

→

CAM3

→

CAM4

→

AUX

→

SPLIT2

→

SPLIT3

→

SPLIT4)

The OSD indicates which image is displayed on the screen.

MENU

MENU

2. Press once to enter menu mode. Press again to exit from menu mode.

5

r

OPERATIONS

6

DAY/NIGHT SENSOR

Automatic Brightness Setting

Automatically adjusts the brightness of the image to the lighting conditions in the immediate vicinity of the monitor.

The built-in Day/Night sensor on the front of the SV-LCD70A monitor captures the light and activates the day/night mode.

The sensitivity of the Day/Night sensor is adjustable.

For more information, see " DAY/NIGHT SETTING" in MAIN MENU.

6

r

OPERATIONS

1. DISPLAY MENU

MENU

UP / DN

MENU UP DN

Short Key Shifting

(more than 0.5 sec)

SOURCE

Selecting

- / +

+

Option setting

MENU

MENU

Exit

DISPLAY MENU

BRIGHT

30

(0~60)

BRIGHT

CONTRAST

COLOR

TINT

30

30

30

30

CONTRAST

(0~60)

30

COLOR

30

(0~60)

PAL MODE

TINT

30

(0~60)

NTSC MODE

2

NOTE

*User can set up an individual display mode for CAM channel and

AUX channel using "DISPLAY MENU".

a. CAM Display setting:

Activate "DISPLAY MENU" on CAM Channel by pressing

MENU

and set up Display menu.

*If you set up the display mode of CAM Channel, CAM1~CAM4 will

be displayed as same display mode.

b. AUX Display setting:

and set up Display menu.

2. MAIN MENU

Selectable OSD MENU disappears within 7sec if there is no new button pressed.

MENU UP / DN

MENU UP DN

SOURCE

Option setting

=

A

Long Key Shifting

(more than 2 sec)

7

r

OPERATIONS

M A I N M E N U

1. CAMERA SETTING

2. TRIGGER SETTING

3. SPLIT SETTING

4. DAY/NIGHT SETTING

5. AUTO SCAN SETTING

6. ADVANCED MENU

1

CAMERA SETTING

CAM1

CAM2

CAM3

CAM4

1. CAMERA SETTING

NOR/MIR:

[MIRROR;NORMAL]

NAME:[CAM1_ _ _ _ ]

SORT:

[NORMAL;SHUTTER;

TILT.MT; TILT.AT]

2

NOTE

NORMAL CAMERA.

2. Tilt.AT (Automatic Tilt): When trigger is activated, Tilt CAM automatically turns to downward(-40˚). When trigger is off ,Tilt

CAM automatically turns to upward(0˚).

3. Tilt.MT (Manual Tilt): When trigger is activated, Tilt cam turns to the last set position.

N O R / M I R : [MIRROR;NORMAL]

Each camera’s Normal/Mirror view can be selected.

UP / DN UP / DN

A

UP DN

SOURCE

UP DN

- / +

+

Shifting Selecting Shifting Option setting

MENU

MENU

Exit

CAM1~CAM4

UP / DN

N A M E :[CAM1_ _ _ _]

Camera name can be set .

SORT:[NORMAL;SHUTTER;TILT.MT;TILT.AT]

A sort of camera can be selected.

( NORMAL;SHUTTER;TILT.MT;TILT.AT).

2

NOTE

A wrong selection can cause damage to a camera or to the

SV-LCD70A.

UP / DN UP / DN - / + UP / DN MENU

A

UP DN

SOURCE

UP DN

+

UP DN MENU

Shifting Selecting Shifting Option setting Shifting Exit

CAM1~CAM4

UP / DN

8

r

OPERATIONS

2

TRIGGER SETTING

2. TRIGGER SETTING

TRIGGER1

TRIGGER 2

TRIGGER3

TRIGGER4

TRIGGER5

SOURCE:

[CAM1~4;AUX;

SPLIT2~4]

DELAY : [0~20sec]

MARKER : [ON;OFF]

MARKER SETTING

SOURCE: [CAM1~4;AUX;SPLIT2~4]

UP / DN UP / DN

A

UP DN

SOURCE

UP DN

Shifting Selecting Shifting

+

MENU

MENU

Option setting Exit

TRIGGER1~TRIGGER5

UP / DN

1. User can use 5 triggers and each trigger source(CAM1~SPLIT4) can

be selected.

2. When the trigger is activated, the selected source’s image is displayed.

3. The Triggers have a priority difference according to the following

order:

Trigger1 -> Trigger2 -> Trigger3 -> Trigger4 -> Trigger5 -> Speed switch

Trigger1 has highest priority;

Speed switch has lowest priority.

DELAY: [0~20 sec]

Each trigger's delay time is adjustable from 0 sec to 20 sec.

2

NOTE

If one camera is activated by an intermittent 12/24VDC signal

( e.g. from an indicator light) it must be delayed to prevent the picture from flickering.

MARKER:[ON;OFF]

1. ON/OFF setting for distance marker when any trigger is engaged.

UP / DN UP / DN - / + MENU

A

UP DN SOURCE UP DN

+

MENU

Shifting Selecting Shifting Option setting Exit

TRIGGER1~TRIGGER5 UP / DN

9

r

OPERATIONS

MARKER SETTING

SOURCE

Selecting

UP / DN

UP DN

Shifting

- / +

+

Option setting

LEFT-RIGHT UP-DOWN WIDTH

1.

POSITION & WIDTH setting for distance marker when any trigger is engaged.

3

SPLIT SETTING

A

3. SPLIT SETTING

SPLIT2

SPLIT3

SPLIT4

UP / DN

UP DN

SOURCE

2

- Various images can be displayed at the

same time; the sources for shared

images can be assigned to

SPLIT2, SPLIT3 and SPLIT4.

-SPLIT2 (DUAL SCREEN DISPLAY)

-SPLIT3 (TRIPLE SCREEN DISPLAY)

-SPLIT4 (QUAD SCREEN DISPLAY)

* Only one audio function can be used.

MENU

MENU

NOTE

Shifting Selecting Exit

SPLIT2~SPLIT4

UP / DN

SPLIT2 SPLIT3

SPLIT2 SPLIT3

SOURCE1:[CAM1~CAM4]

SOURCE2:[CAM1~CAM4]

AUDIO:[CAM1~CAM4]

SOURCE1:[CAM1~CAM4]

SOURCE2:[CAM1~CAM4]

SOURCE3:[CAM1~CAM4;OFF]

AUDIO:[CAM1~CAM4]

10

r

OPERATIONS

SPLIT4

SPLIT4

SOURCE1:[CAM1~CAM4]

SOURCE2:[CAM1~CAM4]

SOURCE3:[CAM1~CAM4;OFF]

SOURCE4:[CAM1~CAM4;OFF]

AUDIO:[CAM1~CAM4]

- / +

+

A

UP / DN

UP DN

Shifting

MENU

MENU

Exit

4

DAY/NIGHT SETTING

User can adjust the sensitivity of DAY/NIGHT SENSOR.

4. DAY/NIGHT SETTING

SENSOR:[ON;OFF]

Select Sensor ON/OFF.

SENSITIVITY:[0~60]

Adjust the sensitivity of DAY/NIGHT LEVEL; the higher value expedites the night mode activation.

NIGHT BRIGHT:[0~60]

Adjust the BRIGHTNESS LEVEL.

A

UP / DN

UP DN

Shifting

- / +

+

MENU

MENU

Exit

11

r

OPERATIONS

5

AUTO SCAN SETTING

5. AUTO SCAN SETTING

AUTO SCAN:[ON;OFF]

AUTO SCAN DELAY

AUTO SCAN:[ON;OFF]

ON/OFF setting for auto scan function.

UP / DN MENU

A

UP DN SOURCE MENU

Shifting Selecting Exit

SPLIT2~SPLIT4

UP / DN

AUTO SCAN DELAY

The auto scanning time of each camera can be adjusted(0~30sec).

AUTO SCAN DELAY

CAM1

CAM2

CAM3

CAM4

AUX

SPLIT2

SPLIT3

SPLIT4

2(0~30)

2(0~30)

2(0~30)

2(0~30)

2(0~30)

2(0~30)

2(0~30)

2(0~30)

UP / DN

UP DN

Shifting

SOURCE

Selecting

- / +

+

Option setting

MENU

MENU

Exit

12

r

OPERATIONS

6

ADVANCED MENU

6. ADVANCED MENU

UP/DOWN:[UP;DOWN]

LEFT/RIGHT:[LEFT;RIGHT]

VIDEO FORMAT:[NTSC;PAL;AUTO]

AUTO POWER:[ON;OFF;AUTO]

FACTORY RESET

UP/DOWN:[UP;DOWN]

Converted image display (top and bottom).

LEFT/RIGHT:[LEFT;RIGHT]

Converted image display (right and left).

VIDEO FORMAT:[NTSC;PAL;AUTO]

NTSC or PAL system can be selectable.

AUTO POWER : [ON;OFF;AUTO]

* OFF setting: Monitor keeps "Stand-by" setting regardless of the last

mode before the ignition key is turned off.

* ON Setting: Monitor is turned on automatically when the ignition key is switched

on regardless of the last mode the monitor was in the last time it was turned off.

* AUTO setting: Monitor starts up to the mode it was in before the ignition key was

turned off.

ignition key off.

A

UP / DN

UP DN

Shifting

- / +

+

Option setting

MENU

MENU

Exit

FACTORY RESET

A

UP / DN

UP DN

Shifting

SOURCE

Selecting

MENU

MENU

Exit

2

NOTE

Reset the monitor to return to the factory settings; personal setting will be initialized.

13

r

INSTALLATION

1

DASH BOARD SCREW MONITOR

STAND BRACKET

2

SUNVISOR MONITOR

14

r

SYSTEM CONNECTIONS

SV-LCD70A

MONITOR

CONTROL BOX

A

AV-OUT

V IR-receiver A

AV-IN

V

CA1 CA2 CA3 CA4

POWER

INPUT

DC10V~32V

SHUTTER CAMERA/TILT CAMERA/NORMAL CAMERA

POWER/TRIGGER WIRE FUNCTIONS

REF# WIRE COLOR DESCRIPTION

1 RED POWER IN DC(10 to 32V)

2 BLACK GROUND

3 GREEN TRIGGER1

4 WHITE TRIGGER2

5 BLUE TRIGGER3

6 YELLOW TRIGGER4

7 BROWN TRIGGER5

8 N.C

15

r

SPECIFICATIONS

Model: SV-LCD70A

Power Input

Video System

Panel

Backlight

Resolution

Viewing Angle

Format

Display Mode

Operating Temp.

Storage Temp.

Vibration

OSD Control

OSD language option

Dimension

Weight

Supplied acc’y

DC 12V (from control box)

NTSC / PAL compatible

7" Digital

LED(400cd/

㎡

)

800 X 3(RGB) X 480

Top:50 °, Bottom:70 °, Left: 70°, Right:70°

16:9 wide

Single/Split/Triple/Quad

-25℃ ~ +75℃ ( -13℉ ~ 167℉)

-30℃ ~ +85℃ ( -22℉ ~ 185℉)

5 G

Day & Night Sensor,

Bright, Contrast, Color, Tint(NTSC)

Mirror/Normal,

Day/Night Mode/Parking Guide

*Separate setting for CAM and AUX Channel.

Multilingual

197(W) X 138(H) X 32(D) mm

7.8(W) X 5.4(H) X 1.3(D) inch

Approx. 0.6 Kg

Power cable (2M) (1)

Sun Visor (1)

Mounting bracket (1)

Cable Reinforcement (2)

Screw kit (1)

Instruction Manual (1)

16

THIS SYMBOL MEANS DO NOT DISPOSE OF

AS MUNICIPAL WASTE.

RE-USE OR RECYCLE WHEREVER POSSIBLE.

ELECTRICAL / ELECTRONIC COMPONENTS MAY

CONTAIN SUBSTANCES WHICH ARE HARMFUL TO

THE ENVIRONMENT.

FOR ENVIRONMENTALLY SOUND METHODS OF

DISPOSAL, PLEASE CONTACT YOUR LOCAL

GOVERNMENT AUTHORITY.

printed in korea